1
1.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Mixail Korchikov (D_o_r_G)
data
eye 1
favorite 0
comment 0
Foldable filament spool holder for placement in Nema 17 Hole. Without pins as on the original model.
Topics: spool, thingiverse, holder, filament_holder, NEMA_17, 3D Printing, nema17, spool_holder,...
1
1.0
Feb 17, 2022
02/22
Feb 17, 2022
by
SY W (Flu_Shots)
data
eye 1
favorite 0
comment 0
This a remix of heatsink clip for NEMA17 motors by Fleafa. The original version was too big in almost all directions (1+mm between the heatsink and the stepper surface). It now clips to my steppers tightly, allowing direct contact with the stepper and the use of thermal compound. This model takes into consideration that the spaces between the heatsink fins are not square but slightly curved. Support is a must and this should not be printed in PLA due to the heat.
Topics: thingiverse, stepper, NEMA_17, heatsink, 3D Printer Accessories, nema17, clip, stl
3
3.0
Jan 15, 2022
01/22
Jan 15, 2022
by
Chris (Wei Xun) Lai (chrislai_502)
data
eye 3
favorite 0
comment 0
Works well with PLA and PETG, set screw is 3M holed. Use Fusion 360 File for more improvements
Topics: NEMA_17, wheels, Parts, thingiverse, NEMA, nema17, wheel, stl
4
4.0
Jan 4, 2022
01/22
Jan 4, 2022
by
Alessandro Paris (alepar)
data
eye 4
favorite 0
comment 0
Simple (tight-fit) nema 17 support for drag-chain. I created this bracket because I needed for my 3018 cnc and I haven't found one that fit my needs. Designed to work with this 20mm chain https://www.thingiverse.com/thing:1167746 Connection with chain is provided by one M4 countersunk screw
Topics: NEMA_17, cnc3018, bracket, cable_chain, thingiverse, NEMA, nema17, stl, Machine Tools, drag_chain
2
2.0
Dec 30, 2021
12/21
Dec 30, 2021
by
Michael (mika2de)
data
eye 2
favorite 0
comment 0
v2 gearing mechanism and further parts required to build your own automated garage for your robot vacuum cleaner. v1 parts available here: https://www.thingiverse.com/thing:4817927 Full project description availabot on https://hackaday.io/project/178993-space-saving-robot-vacuum-cleaner-garage
Topics: NEMA_17, Deebot, garage, ecovacs, thingiverse, Gearing, Garage_Door, NEMA, nema17, Robotics,...
2
2.0
Dec 17, 2021
12/21
Dec 17, 2021
by
Matthew Pluhar (MatthewPluhar)
data
eye 2
favorite 0
comment 0
100% Infill is recommended, the output gear is made to hold an 8mm shaft
Topics: NEMA_17, Robotics, thingiverse, nema17, gearbox, stl
2
2.0
Nov 21, 2021
11/21
Nov 21, 2021
by
Jln Lcrx (Niklos)
data
eye 2
favorite 0
comment 0
Remix de la cale de d'amortisseur de theneedfull pour aussi caler la rotation des moteurs nema lors des changement de direction brusques, pas seulement en compression pour la tension des courroies. Le bruit n'est pas augmenté significativement. La pièce est prise dans la tête d'une vis vissée dans le moteur et dans le filetage d'une seconde vis qui dépasse à l’intérieur du damper. Pour que la cale fonctionne en rotation, il est nécessaire que ce filetage dépasse. L'épaisseur de...
Topics: thingiverse, NEMA_17, NEMA, shim, stepper_dampers, Vibration_damper, damper, stl, dampers, 3D...
2
2.0
Nov 10, 2021
11/21
Nov 10, 2021
by
Matt Schlitz (Agit68)
data
eye 2
favorite 0
comment 0
Basic wire harness to keep wires out of the way on my Micro Swiss Direct Drive. I used Tinkercad for this: https://www.tinkercad.com/things/ix3KO1GYj14
Topics: stepper_motor, thingiverse, 3D Printer Accessories, stl, nema 17, nema17
2
2.0
Nov 8, 2021
11/21
Nov 8, 2021
by
Lucas Isaksen (Clac)
data
eye 2
favorite 0
comment 0
A precise model of the Nema17 2.5A 48mm stepper motor I made NOT for printing, this models parts are not joined together and could cause a very weak print!
Topics: 3D Printing, nema 17 stepper motor, thingiverse, nema 17 48mm, stepper motor, nema, stl, arduino,...
2
2.0
Nov 5, 2021
11/21
Nov 5, 2021
by
Marko Roolaid (Roolaid)
data
eye 2
favorite 0
comment 0
Video https://youtu.be/PkZuPQsbczw
Topics: Robotics, 3dprinter, pololu, battlebot, Lipo, orc_fighter, robotics, FIY, frc_robotics, robot,...
3
3.0
Nov 4, 2021
11/21
Nov 4, 2021
by
Marko Roolaid (Roolaid)
data
eye 3
favorite 0
comment 0
Video https://youtu.be/PkZuPQsbczw
Topics: Robotics, RC_plane, RC_vehicles, 3dprinter, pololu, battlebot, Lipo, robotics, probe, frc_robotics,...
3
3.0
Oct 31, 2021
10/21
Oct 31, 2021
by
r_e 3D (random_engineering)
data
eye 3
favorite 0
comment 0
As i didn't find a step-model of a Nema 17 stepper for a current project, that i could download without at least signing up somewhere, i designed one. Designed after the datasheet from omc-stepperonline.com (type 17HS15-1504S), it should be a decent stand-in for most Nema 17 motors. Includes step, 3mf and stl files.
Topics: stl, stepper_motor, thingiverse, NEMA_17, nema17, Parts
2
2.0
Oct 23, 2021
10/21
Oct 23, 2021
by
Marius Kav (MartasSan)
data
eye 2
favorite 0
comment 0
I wanted a fixture which does not allow "wrong" placement on the axis. There is virtually no play when screwing it in. no support - fully parametric
Topics: thingiverse, Ender_3, 3D Printer Parts, creality_ender_3, Ender3, stl, ender_3_v2, NEMA_17, NEMA,...
2
2.0
Sep 2, 2021
09/21
Sep 2, 2021
by
yair dv (design417)
data
eye 2
favorite 0
comment 0
decorative arrow-shaped "extruder knob" print arrow standing on the flat bottom part - must use supports. print base up side down - no supports needed. glue parts together (use CA glue) - for position see pictures.
Topics: knob, stl, Ender_3, thingiverse, filament, Creality, arrow, creality_ender_3, Shaft, cr10s,...
2
2.0
Aug 30, 2021
08/21
Aug 30, 2021
by
Thomas H (Tprint3D)
data
eye 2
favorite 0
comment 0
Platform to mount a Flying Extruder on a Delta Printer. I designed it specifically to fit the Voron Pocketwatch extruder mod for Nema-17 stepper motors by GSL12 on my FLSUN Q5, but it will work just fine with other delta printers. The holes in the platform increase structural stability while keeping it lightweight and can be used as a means to fix the wire harness to. The mount for the stepper motor has grooves on the inside for enhanced rigidity. I also included a generic motor mount to use it...
Topics: stl, thingiverse, direct_drive_extruder, flsun_q5, delta_3D_printer, delta_printer, pocketwatch,...
2
2.0
Aug 28, 2021
08/21
Aug 28, 2021
by
Hans Hanson (x_Hans_Hanson_x)
data
eye 2
favorite 0
comment 0
Almost the same number and length of shafts are required as with the opposite Motor Mount and Pulley mount (except for the two Dowel Pin 5x40mm for the belt binder). The same goes for the idler and pulley.
Topics: HevORT, NEMA_23, stl, corexy, thingiverse, Hevort_Upgrade, hdd, nema23, awd, nema17, Core_XY,...
2
2.0
Aug 21, 2021
08/21
Aug 21, 2021
by
Collin Mayer (neoc2003)
data
eye 2
favorite 0
comment 0
Designed for a CR-10 to add an extruder - Uses M5 bolts and nuts - Smaller holes are for M3 inserts for a future addition
Topics: stl, CR10, thingiverse, 3D Printing, dual_extruder, NEMA, clamp, nema17, NEMA_17, CR-10, extruder,...
3
3.0
Aug 12, 2021
08/21
Aug 12, 2021
by
Viktor (Vikt0r)
data
eye 3
favorite 0
comment 0
Nema 17 Stepper Motor (17HS24-2104S) mount for oddly shaped rotary table. Cap screws for this are M3 .5 thread 10mm long Fairly sturdy. I only needed to drill/tap 2 screws to keep it locked on tight without vibration. You may need to glue a little piece of gasket material on the motor plate to provide more stability/shock absorption but not necessary for this. I also had to lathe a small groove on the rod for a snap ring where the handle would normally keep it in place as it is turned....
Topics: 3D Printing, nema17, mount, rotary_table, NEMA_17, stl, thingiverse
2
2.0
Aug 7, 2021
08/21
Aug 7, 2021
by
Manuel Schmitt (Kasperdelasopa)
data
eye 2
favorite 0
comment 0
This was designed to be used as a window opener for me. But it can serve in general as a linear actuator. Parts needed: 1 10mm M4 thread sphere 2 6mm 200mm linear shaft 1 17HS3401 300mm with screw 2 LM6UU 1 3*6*5mm patch SMD DIP button 1 DC female plug 5,5x2,1mm 2 M3 8mm 2 M3 10mm 2 M3 18mm 2 M3 5mm 6 M3 nut You also need the flat version from this lead screw nut: T8 lead screw nut (flat version/2-holes) or https://www.thingiverse.com/thing:4815442 The thread of the stepper motor and the linear...
Topics: automation, Window Opener, DIY, thingiverse, home_automation, linear_slide, NEMA_17,...
2
2.0
Jul 27, 2021
07/21
Jul 27, 2021
by
Stephen Chan (sychan)
data
eye 2
favorite 0
comment 0
The original model was exactly what I was looking for, but way too big for what it was. I pulled into MeshMixer, converted it to solid to eliminate the non-manifold issues, which reduced the file size by 90% and then further reduced it another 90% to get a 700k file with the "_small" suffix. Useful for working with models of BMG style extruders with reduction gears.
Topics: thingiverse, 3D Printer Parts, NEMA_17, stepper_motor, Pancake_motor, nema17, stl
2
2.0
Jul 15, 2021
07/21
Jul 15, 2021
by
Andres Felipe Ramirez (ANDRES_F289912)
data
eye 2
favorite 0
comment 0
Design to put the AS5600 sensor on the top of the Nema 17 Stepper Motor. This design allow to colocate the motor standing without any problem with the sensor, to connect it, you have to use jumpers cable in the hole. Printing: Infill: Depending of the use but with 20% its enough Layer 0.2 it's recommended Velocity: 40mm/s (PETG material) Rafts: Doesn't matter Supports: Only for the screw holes Use 4 M3x50 to adjust the base to the motor
Topics: engineering, motor, sensor, stl, NEMA_17, stepper, AS5600, Engineering, thingiverse, nema17
2
2.0
Jul 13, 2021
07/21
Jul 13, 2021
by
Rory Morgan (RoboticsPerformanceManufacturing)
data
eye 2
favorite 0
comment 0
Hello Guys! This is a small simple planetary gearbox for a nema 17! This is designed to be as small and simple as possible due to this the ratio is only 4.2:1 but for a lot of robotics projects ( like mine, check it out on my website rpmengeerings.com!) its enough for quality tests, proof of concepts and to make something awesome! This is designed to be inline with the motor and now dramatically change its diameter to make sure it fits in places a normal nema 17 would. It is quite a tight...
Topics: Planetary_Gearbox, Gear, stl, NEMA_17, Robotics, thingiverse, nema17, gearbox
2
2.0
Jul 4, 2021
07/21
Jul 4, 2021
by
Karolina Gołąbek (BlueDove7)
data
eye 2
favorite 0
comment 0
The designed element is used to reduce vibrations transmitted from the engine to the structure. Its shape is perfectly matched to the Nema 17, thanks to which the flat surface also adheres to the mount. Bowden speed 20mm/s Direct speed 60mm/s 5 walls I recommend leaving 1 layer to be 30-40% infill or filling the entire model with the material. The element does not require additional fixing, if the drive will be held in place by screwing it in.
Topics: stepper_motor, vibration_dampener, vibroblade, Vibration_dampening, vibration, 3D Printing,...
4
4.0
Jul 2, 2021
07/21
Jul 2, 2021
by
Martin Sidgreaves (goldfishrock)
data
eye 4
favorite 0
comment 0
After fitting my Ender-3 Pro with a Micro Swiss direct drive I found that the cables were floating around at the extruder end. I came up with the idea of printing a clip to attach to the extruder stepper motor that the conduit could be attached to and save wear and tear on the cables connected to it. After several designs I settled on this one which has ventilation holes. The clip simply 'clips' over the stepper motor and you use 3mm tie-wraps / cable-ties to attach the conduit. Make sure there...
Topics: cable_management, cable_clip, stl, NEMA_17, DirectDrive, MicroSwiss, 3D Printer Parts, Ender_3,...
2
2.0
Jul 2, 2021
07/21
Jul 2, 2021
by
cemal mumcuzade (Cemal-M)
data
eye 2
favorite 0
comment 0
In the city I live in, the extruder motor overheats because the temperatures rise by 40 C, the motor protects itself and I could not finish the printing. I started looking for a ready-made project suitable for the CR-6 SE to cool the Nema 17 motor. There were very good projects, but the fact that the Z axis shaft was too close to the motor was preventing it. In the projects I found, since the fan was at the bottom of the motor, the heater bed would give the incoming heat to the motor and it...
Topics: cooling, creality_CR6, cooling_fan, cr6se, stl, CR6_SE, NEMA_17, Creality, Creality_CR6-SE, fan, 3D...
3
3.0
Jun 25, 2021
06/21
Jun 25, 2021
by
juan sebastian (jusebago)
data
eye 3
favorite 0
comment 0
holder for filament sensor case to fix it on nema 17 motor
Topics: stl, bracket, filament, bowden, mounting_bracket, Filament_Sensor, nema17, NEMA_17, support, 3D...
3
3.0
Jun 23, 2021
06/21
Jun 23, 2021
by
Paolo Di Petta (paolodipetta)
data
eye 3
favorite 0
comment 0
Did you install a direct drive upgrade onto your Ender 3, and now want to cover the bottom of the NEMA 17 extruder stepper motor? Here's two versions of a cover with a hexagon pattern for you to use. I did it mainly because the metal finish on the bottom of the motor was highly reflective to my IR camera on my OctoPi. This helps cut down on the reflection a little. Remix if you like :) Check out my other designs here: https://www.thingiverse.com/paolodipetta/designs
Topics: creality_ender_3, Ender_3v2, stepper, Ender_3_Pro, upgrade_ender3v2, nema17, NEMA_17, direct_drive,...
3
3.0
Jun 19, 2021
06/21
Jun 19, 2021
by
Shemith Paiko (mr_paiko)
data
eye 3
favorite 0
comment 0
Mounting bracket for NEMA 17
Topics: stl, nema17, thingiverse, NEMA_17, motor_mount, 3D Printer Accessories, stepper_motor_mount
3
3.0
Jun 17, 2021
06/21
Jun 17, 2021
by
Felix Borchardt (Garfield3D)
data
eye 3
favorite 0
comment 0
I needed a clean looking Nema17 holder for my study project.
Topics: stl, nema17, thingiverse, holder, 3D Printer Parts, NEMA_17
3
3.0
Jun 14, 2021
06/21
Jun 14, 2021
by
Ricardo Franke (Devilscave)
data
eye 3
favorite 0
comment 0
Ich habe hier einen Stecker halter konstruiert der einen JST SM2,54 Stecker am Nema17 festhält damit dieser beim Bewegen des Motors nicht die Kabel beschädigt. Dies war eine der ersten Ursachen für den kleinen Umbau. Später erwies es sich noch sehr nützlich als ich die Motoren gegen bessere ausgetauscht habe und diese ebenfalls gleich mit diesem update versehen habe. So ist ein Motor sehr schnell getauscht. Der Halter kann in drei Positionen montiert werden, kommt ganz drauf an wie man...
Topics: nema, thingiverse, pin, plug, plug_holder, 3D Printer Parts, creality, stl, nema17, ender, JST,...
3
3.0
Jun 10, 2021
06/21
Jun 10, 2021
by
Rubén Alejandro Poot Peña (zonakb)
data
eye 3
favorite 0
comment 0
Diseñado para utilizar los cables dupont tradicionales en los motores nema, recomienda utilizar pegamento de contacto para aderir los dupont 2.54 al adaptador
Topics: nema23, dupont, NEMA_23, thingiverse, 3D Printer Accessories, stl, Conector, JST, NEMA_17,...
3
3.0
Jun 10, 2021
06/21
Jun 10, 2021
by
Rubén Alejandro Poot Peña (zonakb)
data
eye 3
favorite 0
comment 0
Diseñado para utilizar los cables dupont tradicionales en los motores nema,sin necesidad de pegamento para aderir los dupont 2.54 al adaptador
Topics: nema23, dupont, NEMA_23, thingiverse, stl, JST, Dupont_Crimpers, NEMA_17, 3D Printer Parts, nema17,...
3
3.0
Jun 4, 2021
06/21
Jun 4, 2021
by
Shane Hooper (shanehooper)
data
eye 3
favorite 0
comment 0
This is the Nema 17 z-axis motor mount for the Workhorse 3d printer. The Workhorse is a large build area 3d printer that uses lead screw on the xyz axis. https://3ddistributed.com/3d-printers/workhorse-printer/
Topics: nema motor mount, NEMA_17, 3D Printer Parts, nema17, stl, thingiverse, stepper_motor, stepper,...
3
3.0
Jun 3, 2021
06/21
Jun 3, 2021
by
Felipe T (Felipensis)
data
eye 3
favorite 0
comment 0
This is an upgrade kit for the Easythreed X4 model (but should work on any X's model - X1/X2/X3/X4). The upgrades include brackets/supports to replace the original stepper motors by Nema 17 ones and also a support for the E3D V6 hot end. For the Y and X axis, I'd recommend using Nema17 model 17hs4023 ("pancake" steppers). For the Z axis, 17hs4401 is advised, once pancake motors could not handle the axis weight. The brackets are pretty much plug-n-play, but the Y bracket needs that you...
Topics: 3D Printer Parts, easythreed upgrade, thingiverse, easythreed x4, nema 17, easythreed, stl
3
3.0
May 26, 2021
05/21
May 26, 2021
by
Ingo Bode (PowerEdition)
data
eye 3
favorite 0
comment 0
Test Draw for Z-Max Endstop Solution. Only a Test System but works. I have reintegrated an earlier idea for relieving the load on the motor ball bearings. Since I already use these on an older unit. The bearings used here carry a 220 volt heating bed, 8 mm aluminium, thermal fuse, PEI pressure plate or mirror, depending on the requirements, with additions of a total weight of up to 4.5 kilograms. The STL can be used on many Nema 17 Z systems with a flat housing. Used Endswitch:...
Topics: Sapphire Plus, Z Endstop, TwoTrees, Sapphire Pro, Nema 17, S235, BallBearing, thingiverse, nema, 3D...
3
3.0
May 20, 2021
05/21
May 20, 2021
by
Ingo Bode (PowerEdition)
data
eye 3
favorite 0
comment 0
For every ball bearing with 7 mm high and less or equal 20 mm diameter, check the link. https://de.aliexpress.com/item/32899864102.html
Topics: Nema 17, Z_Coupler, Z Axis, thingiverse, 3D Printing, TR8, stl
3
3.0
May 3, 2021
05/21
May 3, 2021
by
icimden gelen (icimdengelen)
data
eye 3
favorite 0
comment 0
Nema 17 motor mount
Topics: step motor mount, nema 17 motor mount, DIY, thingiverse, nema 17, stepper_motor_mount, stl
3
3.0
Apr 30, 2021
04/21
Apr 30, 2021
by
Kyle Mercer (Berkelium)
data
eye 3
favorite 0
comment 0
A remix of the Nema 17 cooler by Ente246. My rig has a z-axis stepper motor bracket and damper that interferes with cooling and as a result the motor gets very hot. I tried https://www.thingiverse.com/thing:3041691 but the mount doesn't expose enough of the motor surface to have any effect. Therefore I decided to modify Ente246's design by removing the mounting holes used to attach to the top of the stepper motor, and replacing with holes spaced for t-nuts that can be mounted on the Ender 3...
Topics: 4040_extrusion, NEMA_17, 4040_Mount, 4040_fan, 3D Printer Parts, fan, nema17, thingiverse, cooler,...
4
4.0
Apr 23, 2021
04/21
Apr 23, 2021
by
Fabian Randhartinger (Punk_aerzte)
data
eye 4
favorite 0
comment 0
Hello everybody. Here is my first big project. Everything should be self-explanatory. The following are still required: - arduino uno - stepper motor Nema 17 - stepper driver (some code from the Internet) - 608zz ball bearings (the standard thing) - Glue - Electric wire - motivation parts must be printed out twice if there is a (2) look at the PDF if you have any questions about the size Questions are gladly answered in the comments https://www.youtube.com/watch?v=gVI6xIZTkVo&t=3s the model...
Topics: fully_printable, finisher, smoothing, 3D_printing, nema17, jewerly, Rock_Polisher, polish,...
2
2.0
Apr 13, 2021
04/21
Apr 13, 2021
by
Simon Epp (epps)
data
eye 2
favorite 0
comment 0
This is a 3D printer that fits in an IKEA Kallax. This project is still in progress. The print size is 214 * 214 * 205mm. It has linear rails and a TMC2209 step driver for extremely quiet running. It's designed to fit in any living room so everyone can have one without wasting a lot of space. All components and the filament are in a Kallax box. I'm posting this to see how many people like this, the more people like it the higher I can put it on my priority list to produce it.
Topics: IKEA_KALLAX, 3dprintable, 3D_printing, 3D_Slash, NEMA, nema17, kallax, E3D, all_in_one, BTT,...
3
3.0
Apr 11, 2021
04/21
Apr 11, 2021
by
Stephan Bürger (sbuerger)
data
eye 3
favorite 0
comment 0
This is a cap covering the pulley sides of the Little Monster's (or any equivalent delta printer's) X, Y and Z motors, just to keep dust off the gears and make the printer's look a little less "raw". Application is easy: Just print it, slide it onto the motor mount, done. As Tevo uses standard NEMA 17 angled mounts for the motors, the cap will also fit any other NEMA 17 motor with a standard mount. Print this thing using whatever filament you desire with an infill value of 100. Just...
Topics: stl, homers, NEMA_17, Dust_Protection, 3D Printer Accessories, tevo, thingiverse, Little_Monster
4
4.0
Apr 9, 2021
04/21
Apr 9, 2021
by
Sam Harford (KingSam1st)
data
eye 4
favorite 0
comment 0
Important Please Read! The vid has assembly instructions (The hovering gear and mount is *duh* Where the stepper goes) every part except stepper is printed If you do not want to buy a new stepper, Use the stepper from your Extruder (Gear Part) cos u don't need it for this. u can always re-attach later You can print things that are pastes *duh*... like clay, thick cookie dough. stuff like that I can't be bothered writing things at the moment. I will do a proper desc after I have tested... Post...
Topics: school, fully_printable, pizza sause, wow, ice cream, Nema, Test, Smush, printer_calibration, x...
2
2.0
Mar 31, 2021
03/21
Mar 31, 2021
by
Denis Blaho (Blaho)
data
eye 2
favorite 0
comment 0
This was an attempt of making 3D Printed actuator without bearings. I used M3x30 and M3x5 screw, 150mm long lead screw and 150mm long aluminum tube with an outer diameter of 15mm and an inner diameter of 13mm. The housing for screw is split into 2 parts because it allowed me to add/change sensors really quickly. I also added .f3z file so you can edit it!
Topics: stl, PLA, screw, Robotics, NEMA_17, 3D_printing, nema17, linear_actuator, stepper_motor, thingiverse
4
4.0
Mar 30, 2021
03/21
Mar 30, 2021
by
Szymon Ochocki (greenmagic)
data
eye 4
favorite 0
comment 0
A simple way to solve the problem with cable breakage. With this cover it is possible to mount a PG7 gland or a GX12 socket to NEMA17 and NEMA23 stepper Some peoples have a problem with dimensions in slicer. The NEMA17 file (both) should have the dimensions: X = 51mm (39.37%) Y = 46mm (39.37%) Z = 30mm (39.37%) The NEMA23 file should have the dimensions: X = 68.4mm (1000%) Y = 38mm (1000%) Z = 60.4mm (1000%)
Topics: stl, stepper, motor, nema23, NEMA_17, NEMA, nema17, NEMA_23, stepper_motor, 3D Printer Parts,...
4
4.0
Mar 25, 2021
03/21
Mar 25, 2021
by
Sergio Williams (SurgeFF)
data
eye 4
favorite 0
comment 0
***Update: Found the opening for the display was just a bit too small so new housing is uploaded. You can just file off 2mm from the top of the display mount and it will fit too.*** A housing for a stepper motor controller and driver bought cheap as you will see from the pictures when I finally assemble it all. The stepper driver and controller despite being Japenglish and can't read the buttons at all is a really good product. Came with a literal half a display cable, but I just soldered those...
Topics: stl, stepper, controller, 40mm fan, housing, driver, nema17, stepper driver, stepper controller,...
5
5.0
Mar 24, 2021
03/21
Mar 24, 2021
by
Shane Hooper (shanehooper)
data
eye 5
favorite 0
comment 0
This is the new motor mount to the SolidCore 3D Printer. see >> https://www.thingiverse.com/thing:4307266 I've been working on a modular and scalable corexy design called the SolidCore for over a year now. The plan is to have a platform or ecosystem of parts that can be used on any 3d printer that uses 2020 frame extrusion. The original motor plate had a 20mm cut out to seat in the corner of the frame. One of the problems I ran into was that many of the frames use square corner brackets...
Topics: stl, corexy, solidcore_corexy, NEMA_17, nema17_mount, nema17, solidcore_3d_printer, Solidcore,...
3
3.0
Mar 24, 2021
03/21
Mar 24, 2021
by
Doug Joseph (Design8Studio)
data
eye 3
favorite 0
comment 0
NEMA 17 Stepper Motor Mount This is a mount / holder for affixing NEMA 17 Stepper Motor to 2040 Extrusion for 3D Printers. I'm uploading two versions: a full width one that would stick out some on both sides of the 2040, and a slim, open-sided version that is exactly 40 mm wide. If you have to attach a T bracket sheet or L bracket sheet right beside the mount, then the slim line one is what you want. I'm also attaching a schematic showing the dimensions of the particular kind and size of NEMA...
Topics: stl, 2040_v_slot, Stepper, 2040_mount, 2040_extrusion, holder, aluminum_extrusion,...
4
4.0
Mar 24, 2021
03/21
Mar 24, 2021
by
Dmitry Tr (TrDA)
data
eye 4
favorite 0
comment 0
### Note: + Designed in Fusion360. + Project file attached. https://youtu.be/2qmdXcYKPTI ### Firmware: Best code for ESP8266 (NENA-17 + esp8266 + A4988 + mqtt) https://tasmota.github.io/docs/Blinds-and-Shutters/#using-stepper-motors ... or other options: Code for ESP8266 (NENA-17 + esp8266 + A4988 + mqtt) https://tasmota.github.io/docs/A4988-Stepper-Motor-Controller If you have questions about how Tasmota software works, visit the Tasmota Discord chat room for a discussion:...
Topics: Automatic, NEMA_17, nema17, motorized, WeMos_D1_Mini, drv8825, Autodesk_Fusion_360,...
3
3.0
Mar 17, 2021
03/21
Mar 17, 2021
by
Kimo Ehle (Keemo2020)
data
eye 3
favorite 0
comment 0
X Y Motor mounts for Sapphire Plus, moved to the side about 2mm - 2,25mm, metal mounts are not welded, vibrating and making strage noises due profile was not closed. 2mm longer M4X8mm Hex screws (7,5-8mm Head diameter) have to be used. I printed them without supports flat, large belt hole facing up, for strengh 60% infill.
Topics: stl, NEMA_17, anti_vibration, 3D Printer Parts, thingiverse, realignment, Sapphire_Plus
4
4.0
Mar 14, 2021
03/21
Mar 14, 2021
by
L' ours blanc (un_ours_blanc)
data
eye 4
favorite 0
comment 0
A knob for the extruder motor's axle of the Creality Ender 3. I uploaded two models, one holed with a specific shape, an other one that remains stock. It's now your task to add something to the blank knob ! (And post a remix, by the way) It fits Nema Motors axle with a gentle pression.
Topics: stl, creality_ender_3, Ender3, motor, Creality, Ender_3, extruder, NEMA_17, NEMA, nema17, 3D...
