11
11
Jan 18, 2021
01/21
by
Richard R. (3DPrinTek)
data
eye 11
favorite 0
comment 0
I have "improved" the original design to get the heat from the motors away a little bit better - and while i was at it I made the cable tie "hole" a bit sleeker too. Hope you like it.
Topics: 3D Printer Parts, cable_holder, thingiverse, strain_relief, nema17, NEMA_17, stl
9
9.0
Mar 16, 2021
03/21
by
Claus (3D-Muc)
data
eye 9
favorite 0
comment 0
Holder for cooling a NEMA 17 stepper motor I use this to cool the Z axis of my 3018 cnc mill. The fan has the size 40x40mm, hole spacing 32mm Of course, a flatter fan can be used, mine has a height of 20mm. Only had this in the drawer :-) The housing sits more or less firmly on the NEMA 17 since there are different designs. Have a NEMA since the housing sits tightly, the other loose. Test it.
Topics: cooling, thingiverse, cooling_fan, NEMA, fan, Fan_mount, NEMA_17, 3018, cnc3018, stl, 3D Printer...
9
9.0
Jan 17, 2021
01/21
by
Eric Archer (fallingleavescut)
data
eye 9
favorite 0
comment 0
Untested! Motor mount for a C-Beam linear actuator kit for a Nema 17 motor.
Topics: thingiverse, Robotics, nema17, cbeam, NEMA_17, stl
10
10.0
Jan 18, 2021
01/21
by
Jimmy Bro (Dethis)
data
eye 10
favorite 0
comment 0
Created a Nema 17 mount to use on my extruder on top in my CR10. This can be used with dampers as in the pictures. Updates : 07/01/2018 : - Added 2mm of space on each side to be much loose with dampers. - Added a "beta" version with filament sensor attached, supports must be use to print this one. Feedback and tips is always appreciated.
Topics: 3D Printer Parts, cr10s, nema_17_motor_mount, nema_17_extruder, thingiverse, filament sensor, CR10,...
9
9.0
Apr 17, 2021
04/21
by
Bruno ESGULIAN (NedalLive)
data
eye 9
favorite 0
comment 0
Nema 17 and Nema 23 stepper Motor Mount fort 2020 and 3030 Extrusion Other Upgrade: https://www.thingiverse.com/thing:2720365 https://www.thingiverse.com/thing:2720368 https://www.thingiverse.com/thing:2543433 https://www.thingiverse.com/thing:2541451 https://www.thingiverse.com/thing:2537046 https://www.thingiverse.com/thing:2437440
Topics: thingiverse, nema17, NedalLive, mount, stepper, upgrade, NEMA_23, stl, hypercube,...
11
11
Jan 18, 2021
01/21
by
Thomas Kelsey (thedayowl)
data
eye 11
favorite 0
comment 0
Flexible Shaft Coupler - for several different shaft sizes: * 5mm shaft with flat (Common on NEMA 17 Motors) * 6.35mm shaft with flat (Common on NEMA 23 Motors) * 8mm shaft (a common size for leadscrews/ballscrews) * 1/2 inch shaft with 1/8 inch through pin added 5/27/19 (Misread request from JoelJustJoel - oops! Still a viable design..) * 3/8 inch shaft with 1/8 inch through pin added 5/27/19 (As requested by JoelJustJoel) I hope this list can grow - I plan on adding additional shaft options...
Topics: 3D Printer Parts, shaft_connection, nema_23, nema_17, motor_coupler, thingiverse, plum_coupler,...
10
10.0
Jun 11, 2021
06/21
by
(pparsniak)
data
eye 10
favorite 0
comment 0
Summary Knobs for nema17 shaft (5mm) and common screen pot. Easy fit, have fun! :P
Topics: potentiometer, rotary, NEMA_17, nema17, Shaft, thingiverse, knob, 5mm, extruder,...
10
10.0
Apr 17, 2021
04/21
by
jon krueger (Thumper72)
data
eye 10
favorite 0
comment 0
2/1018 I have since made a switch to the cr10 extruder to test it out on a variety of extruders and I have to say that it is working GREAT!! I can't wait to try flexibles with it, also just setup a cyclops with it and going to be testing that out very soon.. 2/6/18 It has came to my attention that a flat area will need to be grinned into the round shaft as I have been seeing slipping of the extruder gear. A simple metal file or a dremal tool should be fine to use. 2/2/18 Ok it's confirmed that...
Topics: hbot, bowden, extruder, thingiverse, PTFE, nema17, 60T, bowden_extruder, delta, belt_driven, prusa,...
9
9.0
Apr 17, 2021
04/21
by
Job Smolders (JobSmolders)
data
eye 9
favorite 0
comment 0
These are brackets that I have made to mount Nema 17 stepper motors to a small milling table. The “big part” is the main part. I have uploaded one with support material. The cylinder in the middle must be removed after the print. See picture. I also uploaded a “big part” without support material for people who want to generate their own. The small peace is to connect the shaft of the motor to the turning wheel of the table. I printed this part in PET-G. This material is good in flexing...
Topics: diy, nema17_mount, cnc_milling, NEMA_17, milling, thingiverse, stl, nema17, DIY, stepper_motor,...
10
10.0
Jan 18, 2021
01/21
by
steve vp (stevetheprinter)
data
eye 10
favorite 0
comment 0
I made this faceplate in blender to hold 4mm guide rods on a NEMA 17 motor. It can be mounted either on the motor it's self or on an existing bracket. I will probably make a companion part for the other end of the rods but it was not necessary for my build so it isn't ready yet. if you have any problems with this let me know and I will try to correct them.
Topics: stepper_mount, Acme_leadscrew, mounting_bracket, 4mm, rod, faceplate, thingiverse, stepper_plate,...
15
15
Jan 18, 2021
01/21
by
Ken Cooper (Ken_Applications)
data
eye 15
favorite 0
comment 0
Parametric bracket Openscad program I needed a bracket to hold my Nema 23 stepper motor to a test rig. These are the parameters I used for a Nema 23 stepper motor bracket. thick = 2.5; center_hole_dia=38.7; center_hole_height_from_base=55; width=96; small_hole_dia=6.3; small_hole_pitch=47.2; fillet_rad=12; The stepper motor fixing holes measured 5.5 mm diameter so I put a M6 Tap down the holes and bolted the motor to the bracket with M6 cap heads. I had 2 corners curl slightly up not sure why....
Topics: parametric, engineering, openscad, CNC_Machine, tools, nema_17_motor_mount, angle_bracket, stl,...
11
11
Jan 18, 2021
01/21
by
Rue Mohr (rue_mohr)
data
eye 11
favorite 0
comment 0
Friction/glue mount for back-mounted nema17 stepper motor. 19mm square, 6mm wire provision. Source is there, modify, save, openscad F6, save as stl....
Topics: DIY, thingiverse, stepper_motor, motor_mount, nema17, motor, NEMA_17, stl
11
11
Jan 18, 2021
01/21
by
Kris (superkris)
data
eye 11
favorite 0
comment 0
Update 1-4-2018: I received a couple of request for edits on this design. I finally had some time to edit these request. The files are not yet tested as i'm now using my Ulitmate Z box design that is based on this 1st design. This thing now has 4 different versions: - Original design. With marking and the need to tilt the stepper 90 deg. - Original design, but with CR10 markings removed - New larger design that does not require the stepper to be tilted 90 deg. - New design without CR-10...
Topics: Creality, creality_ender_2, tevo, stepper_motor_mount, Creality_CR-10, stl, Ender_2, thingiverse,...
11
11
Jan 18, 2021
01/21
by
Sérgio Monteiro (noinkprint)
data
eye 11
favorite 0
comment 0
This is my design to install the damper on the back of the Y motor in order to keep him aligned. The part is installed and align perfectly with the step motor. To install this part together with the damper I used two new M3x40mm bolts between the damper and the step motor, and two M3x12mm bolts between the damper and the bracket. I also used an M5 bolt with a half nut in order to fix the bracket to the frame of the printer. This part is designed to print with no support. I've used 75% infill....
Topics: Vibration_damper, 3D Printer Parts, Creality, stl, thingiverse, stepper_motor, reinforcement,...
10
10.0
Apr 7, 2021
04/21
by
Andreas (RFZ)
data
eye 10
favorite 0
comment 0
Concept for a simple adjustable direct-drive extruder. A ball bearing is mounted onto the fourth screw hole of the NEMA17 with a slightly non-concentric lever that enables pressure adjustment. Two M5 nuts can be inserted for Bowden-Tube Push-Fit connectors. A 4x2mm PTFE Tube may be inserted to guide the filament path. The extension ring for the bearing may be printed with flexible/rubber filament. The left part has to be printed twice. ;) An additional frame can be used as spacer between the...
Topics: lightweight, flat, simple, 3D Printer Extruders, sft, extruder, nema_17, stl, thingiverse, nema17,...
15
15
Jan 18, 2021
01/21
by
Lennard Thiel (fawks03)
data
eye 15
favorite 0
comment 0
Hardware: (https://pastebin.com/M21HTSuA) - ESP-32 - RGB LED strip - 2.8" TFT display - 3x IRF540N (R,G,B) (better: IRLZ44N) - A4988 stepper driver (better: DRV8825) - 5V step-down converter - Photoresistor (GL5549) - SHT21 humidity/temperature sensor - NEMA 17 stepper motor * 1x 3D printed case * 5x 3D printed strip holder * 1x 3D printed stepper mount - ~ 65m wire (8x 8.1m) (10m² room) Arduino sketch: https://pastebin.com/SJ2qk8JJ Blynk-project: http://tinyurl.com/ybvk88ts SpotifyRGB...
Topics: esp32, Touch, led_strip, tft, rgb_led, mount, lightning, spotify, temperature_sensor, stl,...
10
10.0
Jan 18, 2021
01/21
by
Dan Blubaugh (dbcoop)
data
eye 10
favorite 0
comment 0
designed this for my new (and far more stable print bed) I have been tinkering with this thing for a few weeks now. the frame is machined aluminum and has drilled and tapped holes for all of the mounts, the end stops are integrated into the rail mounts with tapped m3 screw holes (see rail guide mount set in my designs) I haven't put the belt back on yet simply because I still have 2 slots to mill so I can mount my uprights that hold my z axis square to the print bed. When all is said and done...
Topics: 3D Printer Parts, nema_17_motor_mount, 3d_printer, 300mm, print_bed, thingiverse, Timing_Belt,...
11
11
Jan 18, 2021
01/21
by
Constantine Dr. (ReplayMD)
data
eye 11
favorite 0
comment 0
Just a simple geared knob for my CR-10 extruder. Fits most printers with Nema17 stepper motors or generally with 5mm shafts. An easy way to manipulate the feed and a nice visual tool to spot your retraction behavior. It is a very very tight fight. You may want to upscale it by 0.5-2% Update 01/03/2018 V2 High Clearance / Extended version Added a high clearance version so you can check the filament rolling between the gear and the pulley. Gold is the short version (v1) Gray High Clearance /...
Topics: Creality, valve, parts, Gear, extruder, Creality_CR-10, dial, mount, stl, feed, Ender_2, Anycubic,...
10
10.0
Jan 18, 2021
01/21
by
Lextin Hayes (pointfiftytracer)
data
eye 10
favorite 0
comment 0
This is a motor mount and bearing block for installing a nema 17 and T8 lead screw on the Monoprice Select Mini. Note: you will need to cut the metal surrounding the motor if you use the z spacer like me. This is easily done with the Dremel and won't compromise the structural integrity.
Topics: printer, upgrade, 3D Printer Parts, 3d_printer, NEMA, replacement_part, parts, thingiverse,...
12
12
Jan 9, 2021
01/21
by
Gear Down For What? (Gear_Down_For_What)
data
eye 12
favorite 0
comment 0
####Updates! 4/27/17-Made another version of this with a higher gear ratio. https://youtu.be/8H3fbxzmF9w ####Where's Everything Else??? - This gearbox has an newer, nearly identical twin, with the same form factor and different gear ratio, it can be found in the collection #####https://www.thingiverse.com/Gear_Down_For_What/collections/robotic-arm ######In This Collection you will find: - All other related parts for this project - Future Updates to this Project - All User Submitted Remix's -...
Topics: dual motor, Gearbox, ho hardware, Epicyclic, single motor, CountertopChallenge, Epicyclic_gear,...
10
10.0
Jan 18, 2021
01/21
by
Goran Atanasov (atanasovgoran)
data
eye 10
favorite 0
comment 0
I was making a motorized TV arm mount and I wanted to cover the the steppers somehow, so I designed 3D printable cover. Sizes: 60mm, 48mm, 40mm, 34mm, 28mm, 24mm WARNING: NOT YET TESTED. NOT 100% SURE IF THE TOLERANCES ARE RIGHT. DO NOT USE THESE COVERS IF YOU ARE PLANNING TO RUN THE STEPPERS FOR MORE THAN A COUPLE OF SECONDS!
Topics: 34mm, 3d_printer, NEMA, 3D Printer Accessories, 24mm, 60mm, nema-17, nema17, thingiverse, stepper,...
6
6.0
Mar 22, 2021
03/21
by
erdem murathan (makerTR)
data
eye 6
favorite 0
comment 0
This is my first cnc.I designed for amatuer and professionel user. ıf you have any question,please you ask to me. ------------------------------------------------------------------- this my cnc https://www.youtube.com/watch?v=JQP0hIAUppY
Topics: nema 23, arduino, Engineering, stl, machine, dıy, cnc, CNC_Machine, dıy cnc, NEMA_17, CNC_Router,...
9
9.0
Apr 17, 2021
04/21
by
steve vp (stevetheprinter)
data
eye 9
favorite 0
comment 0
I wanted to make something useful for my first project in blender. there are other motor mounts but this one doesn't have tapered screw holes allowing hex screws to be used and has two M4 mounting holes for stability. If there are any issues with this I would be happy to try and fix them!
Topics: linear_actuator, NEMA_17_bracket, 3D Printing, NEMA_17, thingiverse, stepper, stl, 90_degree,...
10
10.0
Apr 17, 2021
04/21
by
Alister Pearce (Albatrossity)
data
eye 10
favorite 0
comment 0
Z motor mount for the Tevo Tarantula. Stronger then the standard Acrylic version and goes along way to remedy the z motor alignment issues from standard. Printed in PLA at 50% and strong enough, but ABS would be even more betterer.
Topics: nema 17, tevo, thingiverse, stl, z motor, mount, nema_17_motor_mount, tevo_tarantula, 3D Printer...
4
4.0
Jan 19, 2022
01/22
by
Alessandro Paris (alepar)
data
eye 4
favorite 0
comment 0
Simple (tight-fit) nema 17 support for drag-chain. I created this bracket because I needed for my 3018 cnc and I haven't found one that fit my needs. Designed to work with this 20mm chain https://www.thingiverse.com/thing:1167746 Connection with chain is provided by one M4 countersunk screw
Topics: NEMA_17, cnc3018, bracket, cable_chain, thingiverse, NEMA, nema17, stl, Machine Tools, drag_chain
10
10.0
Jan 18, 2021
01/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 10
favorite 0
comment 0
I have wanting to experiment with diode smoothing boards and did a couple videos on the 4 diode versions. However everyone was saying I needed to try the 8 diode version (see here: http://amzn.to/2Eegka1), however still wasn't till I got an e-mail about their use on the Tronxy x5s (see here: https://goo.gl/13mf7Y) which is a Core X/Y printer in other words it is a kinematic printer which works more like a delta then Cartesian printer so decided to give them a try. However the open design of the...
Topics: 3D Printer Parts, NEMA, diode, thingiverse, nema17, NEMA_17, stl
11
11
Jan 18, 2021
01/21
by
gio&anto (mordr3d)
data
eye 11
favorite 0
comment 0
Why have a simple extruder indicator when you can get a JOSEF PRUSA extruder indicator? see here how he spin! https://photos.app.goo.gl/7LsiZOkRtdNDisBI3
Topics: 3D Printer Extruders, Original_Prusa_i3_MK2, thingiverse, prusa, prusa_i3_mk2, nema17, prusa_i3,...
10
10.0
Jan 18, 2021
01/21
by
Thomas Atzmüller (Atziano)
data
eye 10
favorite 0
comment 0
I designed a handwheel for my extruder for two reasons: - to see how fast the extruder spins - to push the filament manualy in or out by hand
Topics: 3D Printer Extruders, delta, Anycubic, hand_wheel, nema_17_extruder, Anycubic_Kossel, thingiverse,...
8
8.0
Jan 17, 2021
01/21
by
Edward Braiman (ebraiman)
data
eye 8
favorite 0
comment 0
This is a Nema17 3030 Aluminum rail mount.
Topics: ramps_14, arduino, 3D Printer Accessories, 3030_extrusion, thingiverse, nema17, NEMA_17, stl
9
9.0
Apr 13, 2021
04/21
by
James Ward (peaberry)
data
eye 9
favorite 0
comment 0
Side exit cable strain relief for the Z axis stepper motor and spindle motor cables on a 3018 CNC Mill / Engraver, but may be useful for other projects with NEMA 17 steppers. The cable can be attached with cable ties or velcro tape. Update: I've added a mirrored version, in case someone prefers to have the cable exit at the opposite side.
Topics: thingiverse, nema17, DIY, CNC_3018_Engraver, cable_strain_relief, stl, cnc3018, strain_relief,...
9
9.0
Jan 18, 2021
01/21
by
Maximilian Heinz (MaximvonAZ)
data
eye 9
favorite 0
comment 0
A direct-line motor mount for a NEMA 17 stepper on a Telescope with EQ-2 system. **Update: Tubes extended over 15 mm.
Topics: Electronics, Telescope, thingiverse, EQ-2, motor_mount, nema17, mount, NEMA_17, stl
10
10.0
Apr 17, 2021
04/21
by
Owen Dare (owendare)
data
eye 10
favorite 0
comment 0
This "thing" is designed to support the Z axis coupling on Flsun I3 2017 with Nema 17 mounted on top of frame. The standard couplings are too springy and many "spider" type coupler pull apart. The stabilizer uses a 608ZZ bearing to support the weight of the Z axis. The bearing is not fully constrained in the axial plane, so should not cause Z wobble issues. Note that I do not have replaced the original acrylic Z motor mounts with aluminium. There may be enough flex in the...
Topics: Z-Axis, NEMA_17, 3D Printer Parts, thingiverse, stl, FLsun_2017, flsun_i3, flsun
10
10.0
Jan 18, 2021
01/21
by
Alexander Gee (bostwickenator)
data
eye 10
favorite 0
comment 0
I was surprised to find that there was not a nice slew drive design on Thingiverse so I made one. It's completely* parametric so you can integrate it into your projects. It's perfect for moving a large load around (for example a telescope or solar panel) with a deep reduction ratio. A NEMA 17 stepper should generate significant torque using this. It uses 6mm BBs for rolling elements The STL files are for a randomly chosen 100mm gear. You can adjust this for your own needs. Change the gear ratio...
Topics: slew, gear, parametric, Robotic_Arm, worm_drive, slew drive, 6mm_airsoft, nema17_mount,...
8
8.0
Apr 7, 2021
04/21
by
fts_ltx (fts_ltx)
data
eye 8
favorite 0
comment 0
-- **WIP NOT TESTED** -- **- update 1 - minor modif** X carriage motor part rework for nema 17. *- Infill : 40% minimum*
Topics: solidoodle, soliddodle, x_carriage, 3D Printer Parts, nema_17, stl, lm8uu, thingiverse, rework
9
9.0
Jan 18, 2021
01/21
by
Matheus Carvalho (LabAutomation)
data
eye 9
favorite 0
comment 0
I made two small modifications to the original. Now, the mount middle bar really stays at the middle regardless of the size of the motor or the beam. Also, I made circles more "round" by adding the variable $fn = 64 to the open scad code. Still possible to improve by optimizing the positioning of the holes for fixing screws, but for now I will leave as it is. Thanks to ccox for the original design.
Topics: thingiverse, 2020_extrusion, 2020, nema17, nema_17_motor_mount, 3D Printing, stl
9
9.0
Jan 18, 2021
01/21
by
Jan Bassett (jmcbassett)
data
eye 9
favorite 0
comment 0
I really like the original knob shape but having fited a filament filter on the extruder input wanted to stop things dropping in to the gap between the motor hob gear and idler; seemed silly to stop dust getting in on the filament but then leave a length exposed to allow re-contamination. I filled the centre of the handle in and then extracted a shaped from each aperture keep the aesthetics and allow it to print nicely without supports
Topics: 3D Printer Accessories, thingiverse, knob, NEMA_17, stl
10
10.0
Jan 18, 2021
01/21
by
no1 Caverntwo (Caverntwo)
data
eye 10
favorite 0
comment 0
####Overview This bracket is easily printable on nearly every printer and allows a NEMA 17 motor (or anything that has the same front plate dimensions) to be mounted on a European Standard 2020 or 20xx extrusion. ####Why I designed this My FLSUN Cube 3d-printer kit arrived with a broken Y-Axis motor bracket. The Y-Motor is a NEMA 17 motor that gets mounted on the 2020 frame of the printer using a basic plastic bracket. Therefore I quickly designed this model to still be able to finish the build.
Topics: 3D Printer Parts, nema_17_motor_mount, NEMA, nema_17_extruder, nema17_mount, thingiverse,...
3
3.0
May 21, 2021
05/21
by
Jonathan Walter (bmxorcist)
data
eye 3
favorite 0
comment 0
Precision Prusa with linear rails, lead screws, and modular Hemera-based X-Carriage! NO MORE BELTS!!! Upgrade your Prusa (or other printer) to linear rails and lead screws for EXTREME ACCURACY!! Can't decide what hot-end to use? Neither can I! Use 1 OR 2 Hemera's (native support), direct drive, bowden, Bed level sensor, or mix and match! Its only a few bolts away with this simple modular X-Carriage. The two-sided x-carriage is designed to bolt directly to the Hemera extruder, but it will accept...
Topics: bltouch_mount, thingiverse, Acme_leadscrew, E3D_v6, x_axis, auto_bed_leveling, linear_slide, E3D,...
3
3.0
May 20, 2021
05/21
by
sbo (mr_sbo)
data
eye 3
favorite 0
comment 0
I designed this mount for the 3Dator Bowden extruder (source: https://www.thingiverse.com/thing:1318849). I personally use this variant made by @50koruny (source: https://www.thingiverse.com/thing:2027378), but they are all compatible. The part uses the connector from the famous Filler spool holder, made by HugoHuge (source: https://www.thingiverse.com/thing:3020026). I redesigned the male plug from scratch on OpenSCAD, thanks to the author for publishing the .step files where I got the right...
Topics: extruder, 3D Printer Parts, mount, thingiverse, Filler, nema17, 3Dator, NEMA_17, universal_mount,...
4
4.0
Jun 7, 2021
06/21
by
Myles (Memon)
data
eye 4
favorite 0
comment 0
The MPCNC fan housing in for the nema 17 motor. Using the 40x40mm fan, ensure that the fan is facing down, pushing air into the void. Designed to pass wires directly into the conduit and avoiding moving parts. This has been designed for the 25mm conduit only. If you would like for another size, please let me know and I will upload. Don't forget to like and thank creators for free items :)
Topics: MPCNC, nema, fan, house, thingiverse, DIY, stl, 40 fan, MPCNC_Add-On, 25mm, nema 17
3
3.0
Mar 10, 2021
03/21
by
Max Davis (max_davis)
data
eye 3
favorite 0
comment 0
This allows you to mount a NEMA 17 stepper motor at the end of a 2020 extrusion to drive a belt.
Topics: stl, thingiverse, stepper, belt_driven_pulley, nema17, NEMA_17, stepper_motor_mount, belt_drive,...
4
4.0
May 1, 2021
05/21
by
Sam Harford (KingSam1st)
data
eye 4
favorite 0
comment 0
Important Please Read! The vid has assembly instructions (The hovering gear and mount is *duh* Where the stepper goes) every part except stepper is printed If you do not want to buy a new stepper, Use the stepper from your Extruder (Gear Part) cos u don't need it for this. u can always re-attach later You can print things that are pastes *duh*... like clay, thick cookie dough. stuff like that I can't be bothered writing things at the moment. I will do a proper desc after I have tested... Post...
Topics: school, fully_printable, pizza sause, wow, ice cream, Nema, Test, Smush, printer_calibration, x...
3
3.0
Jun 22, 2021
06/21
by
Rubén Alejandro Poot Peña (zonakb)
data
eye 3
favorite 0
comment 0
Diseñado para utilizar los cables dupont tradicionales en los motores nema,sin necesidad de pegamento para aderir los dupont 2.54 al adaptador
Topics: nema23, dupont, NEMA_23, thingiverse, stl, JST, Dupont_Crimpers, NEMA_17, 3D Printer Parts, nema17,...
3
3.0
Jun 11, 2021
06/21
by
Grease Monkey (starfighter81)
data
eye 3
favorite 0
comment 0
Simple gearbox designed around my Tronxy X5SA-400. I wanted to add gear reduction to my printer, but never found a suitable (simple) solution. So this thing became my first steps in fusion. To be mounted instead of a NEMA17 by featuring same dimensions. Simple and versatile, can be used with infinite combinations of pulleys and belts. In this example 20 & 40T pulleys + 158T GT2 belt giving me a 2:1 reduction. BOM - 625 bearings 5x16x5 mm - 5mm shaft at least 50mm in lengh - M3 mounting...
Topics: TRONXY, NEMA_17, 3D Printer Parts, nema17, thingiverse, Tronxy_X5SA, Gear_Reduction, gears,...
5
5.0
Mar 16, 2021
03/21
by
Mitchell lensing (robotbuilders)
data
eye 5
favorite 0
comment 0
5.25:1 reduction Printed Parts 1 - Output.stl 1 - Sun_gear.stl 1 - Attachement.stl 1 - Ring_gear.stl 3 - Planet_gear.stl Additional Parts 8 - M3x8mm hex head screws 3 - M2x14mm hex head screws 4 - M3x4x5mm brass threaded inserts 4 - M2x4x3.5mm brass threaded insert 3 - M2 washers https://www.thingiverse.com/thing:4723031 Exploded assembly - https://youtu.be/4iK1dn3FifM
Topics: 3D Printing, Planetary_Gearbox, thingiverse, Planetary_Gear, NEMA_17, stl, gearbox, nema17
3
3.0
Mar 5, 2021
03/21
by
Joshua Moran (LordBBQ)
data
eye 3
favorite 0
comment 0
This is a remixed extruder mount that supports common 'sandwich mount' style extruders, such as the E3D Titan. Secured with a M3 screw. If it is not secure enough, use a Tee nut (I have found a way to make a tee nut with a M3 nut, M3 washer, M5 fibre washer (sides trimmed), extrusion slot, bracket, bolt stack).
Topics: E3D, stl, sandwich_mount, e3d-titan, NEMA_17, 2020_extrusion, 3D Printer Extruders, thingiverse
10
10.0
Apr 22, 2021
04/21
by
rob ten tije (tenij000)
data
eye 10
favorite 0
comment 0
z axis m5 rod top bottom part i use ( Ball Bearings - 625 2RS ) to keep the m5 rod on his place m8 smooth rods x2 bearings ( LM8UU ) x4
Topics: nema17, reprap, nut, NEMA_17, smooth_rod, part, smooth, build_platform, Zaxis, 3D Printer Parts,...
3
3.0
Aug 22, 2021
08/21
by
Viktor (Vikt0r)
data
eye 3
favorite 0
comment 0
Nema 17 Stepper Motor (17HS24-2104S) mount for oddly shaped rotary table. Cap screws for this are M3 .5 thread 10mm long Fairly sturdy. I only needed to drill/tap 2 screws to keep it locked on tight without vibration. You may need to glue a little piece of gasket material on the motor plate to provide more stability/shock absorption but not necessary for this. I also had to lathe a small groove on the rod for a snap ring where the handle would normally keep it in place as it is turned....
Topics: 3D Printing, nema17, mount, rotary_table, NEMA_17, stl, thingiverse
2
2.0
Sep 14, 2021
09/21
by
Collin Mayer (neoc2003)
data
eye 2
favorite 0
comment 0
Designed for a CR-10 to add an extruder - Uses M5 bolts and nuts - Smaller holes are for M3 inserts for a future addition
Topics: stl, CR10, thingiverse, 3D Printing, dual_extruder, NEMA, clamp, nema17, NEMA_17, CR-10, extruder,...
7
7.0
Apr 1, 2021
04/21
by
William Adams (WilliamAAdams)
data
eye 7
favorite 0
comment 0
I have need to mount a motor in such a way that I can adjust its position perpendicular to its shaft axis. This thing has slots in it that will take a M3 sized screw. it also has a big M4 hole in the middle if you want to mount that way. There's not much to it, and I forgot to save my other longer winded Description, so here it is.
Topics: mount, nema, yazzo, openscad, thingiverse, parametric, nema17, Other, motor mount, nema 17, stl
