12
12
Jun 11, 2021
06/21
by
(Philswift1950)
data
eye 12
favorite 0
comment 0
Summary The Williams FW08 was a Formula One car designed by Patrick Head which debuted at the 1982 Belgian Grand Prix held at the Zolder circuit. The FW08C has the distinction of being the first Formula One car ever driven by Ayrton Senna, at Donington Park in July 1983, after he badgered team boss Frank Williams for a test after being sat beside him on a flight. Senna completed 40 laps and lapped the circuit faster than anyone else had managed in the car, including 1983 race drivers Rosberg...
Topics: Formula_1_Race_Car, formula_one, car, racing_car, Race_Car, racecar, formula1, thingiverse,...
9
9.0
Jun 12, 2021
06/21
by
(Philswift1950)
data
eye 9
favorite 0
comment 0
Summary Pulse Racer - Renault Based on the drawings of Harald Belker in the book PULSE the complete guide to future racing
Topics: racing_car, Pulse_Racing, thingiverse, racing, stl
11
11
Jun 11, 2021
06/21
by
(Philswift1950)
data
eye 11
favorite 0
comment 0
Summary Brabham BT24 - Formula 1 From WIKIPEDIA: The Repco Brabham BT24 was a Formula One racing car design. It was one of three cars used by the Brabham racing team during their championship-winning 1967 Formula One season. Only three BT24 chassis were ever raced. Designed by Ron Tauranac, the BT24 was somewhat behind the times in having a spaceframe chassis and the underpowered Oldsmobile-derived Repco V8 engine.
Topics: Formula_1_Race_Car, formula_one, racing_car, thingiverse, Brabham, formula_1, stl
12
12
Jun 19, 2021
06/21
by
(Philswift1950)
data
eye 12
favorite 0
comment 0
Summary Lotus 33 Formula 1 car from 1960's
Topics: formula1, thingiverse, stl, racing_car, car, Formula_1_Race_Car
10
10.0
Jun 11, 2021
06/21
by
(Philswift1950)
data
eye 10
favorite 0
comment 0
Summary Ferrari 156 - affectionately dubbed "sharknose" due to its characteristic air intake "nostrils". Raced in 1961
Topics: Formula_1_Race_Car, car, racing_car, Ferrari, thingiverse, formula_1, racing, stl
11
11
Jun 12, 2021
06/21
by
(Philswift1950)
data
eye 11
favorite 0
comment 0
Summary Cooper Climax - 1960's Formula 1 car (1st attempt)
Topics: Formula_1_Race_Car, car, racing_car, formula1, thingiverse, formula_1, stl
9
9.0
Jun 11, 2021
06/21
by
(Philswift1950)
data
eye 9
favorite 0
comment 0
Summary Pulse Racer - Lotus Based on the drawings by Harald Belker in book PULSE the complete guide to future racing
Topics: racing_car, Pulse Racing, thingiverse, Racing, stl
9
9.0
Jun 19, 2021
06/21
by
(Philswift1950)
data
eye 9
favorite 0
comment 0
Summary Pulse Racer - Audi Based on the book by Harald Belker Pulse the complete guide to future racing
Topics: thingiverse, stl, Pulse_Racing, racing, racing_car
9
9.0
Jun 11, 2021
06/21
by
(Philswift1950)
data
eye 9
favorite 0
comment 0
Summary The Alfa Romeo 158/159, also known as the Alfetta, is one of the most successful racing cars ever produced. The 158 and its derivative, the 159, took 47 wins from 54 Grands Prix entered. It was originally developed for the pre-World War II voiturette formula (1937) and has a 1.5 litre straight-8 supercharged engine. Following World War II, the car was eligible for the new Formula One introduced in 1947. In the hands of drivers such as Nino Farina, Juan-Manuel Fangio and Luigi Fagioli,...
Topics: Formula_1_Race_Car, formula_one, car, racing_car, stl, thingiverse, formula_1, alfa_romeo
374
374
Nov 16, 2020
11/20
by
ABC Music
audio
eye 374
favorite 0
comment 0
Released in Australia in 2010 by ABC Music under the 'ABC for Kids' label. Track Listing: Giggle and Hoot Theme Song Giggle and Hoot Together The Gigglemobile Super Giggle and Super Hoot Roary The Racing Car Theme Song Zigby Theme Song Sesame Street Theme Song Play School Theme Song Play School – Six Little Ducks Play School – Hokey Pokey My Best Friend Use Your Words dirtgirlworld Theme Song The Magic Roundabout Theme Song The WotWots Theme Song Birdbath Boogie Yo Gabba Gabba! Theme Song...
Topics: giggle and hoot, roary the racing car, zigby, sesame street, play school, dirtgirlworld, the magic...
8
8.0
Dec 3, 2021
12/21
by
Adrenal Rush Games
software
eye 8
favorite 0
comment 0
Are you fast enough? Street racing is forbidden...but so what? As soon as the cops are nowhere to be seen, the race starts! It's time to crown the King of the Streets in these illegal contests of speed and strategy. Battle your way to the top! Along the way you can gain five ferocious cars, each differing in speed, steering, traction, and weight. Conquer ten challenging tracks in a variety of racing modes. Invite some friends to a multiplayer match! (I can't find real release date so I used...
Topic: race racing car game action
2
2.0
Apr 19, 2022
04/22
by
Alex Ferraris (Alexanderman)
data
eye 2
favorite 0
comment 0
I wanted an STL of a vintage car with a fair amount of details, but that is relatively easy to print. I couldn't find anything suitable online, so I took a crack at designing one myself. This is what I came up with. The finished model was heavily influenced by a few images and designs online. The model is modular in design, so that various components can be printed in different colors and then glued on, or snapped into place. The only required supports are for the rear end of the main body, and...
Topics: thingiverse, vintage_racing_car, vintage_car, old car, 3D Printing, vintage, racer, car, stl,...
197
197
Feb 14, 2022
02/22
by
BBC Worldwide and Sony
movies
eye 197
favorite 4
comment 0
"The Official BBC Children in Need Medley" is a single by Peter Kay's Animated All Star Band. It is the official Children in Need Single for 2009, and was released on 21 November 2009. The song was shown for the first time on Children in Need 2009. The cover art is a parody of the cover of Sgt. Pepper's Lonely Hearts Club Band by The Beatles. The single has sold over 452,000 copies in the UK, earning it Gold status from the BPI. The single is a medley of multiple songs played out in...
Topics: peter kay, bbc children in need, children's shows, children's programs, music, songs, postman pat,...
7
7.0
Oct 20, 2020
10/20
by
Barnes, Kay
texts
eye 7
favorite 0
comment 0
1 volume (unpaged) : 19 cm
Topics: Racing Car -- Juvenile Fiction, Automobile racing -- Juvenile fiction, Automobile racing --...
10
10.0
Jan 13, 2021
01/21
by
Battle Sniper 123 (Sniper_Battle1)
data
eye 10
favorite 0
comment 0
Vegan Dynamic Sport Car-1
Topics: Sport, super, thingiverse, 3D Printing, racing_car, stl, speed, dynamic, race, car, sports_car,...
415
415
Feb 24, 2016
02/16
by
Beijing Youth Daily Group
texts
eye 415
favorite 0
comment 0
Beijing, China newspaper published 2001–2016 by the Beijing Youth Daily Group.
Topics: beijing, yuan, china, wang, june, chinese, zhang, movie, center, wang xiaoyuan, racing car, red...
1,252
1.3K
Jul 16, 2019
07/19
by
Chapman Entertainment
software
eye 1,252
favorite 3
comment 0
The ISO image of the Roary The Racing Car Pitstop Puzzles
Topics: roary the racing car, iso
33
33
Jun 18, 2021
06/21
by
Chapman Entertainment and Cosgrove Hall Films
software
eye 33
favorite 2
comment 0
An old Flash game I found.
Topic: Roary the Racing Car
892
892
May 28, 2021
05/21
by
Chapman Entertainment and Cosgrove Hall Films
movies
eye 892
favorite 6
comment 0
A rare Roary the Racing Car DVD released in 2011 in the US. Check out the Lost Media Archive's article on this subject!
Topics: Roary the Racing Car, DVD
531
531
Apr 8, 2021
04/21
by
Chapman Entertainment and Cosgrove Hall Films
movies
eye 531
favorite 3
comment 0
I couldn't find this episode in the US dub anywhere online, so here it is. Check out the Lost Media Archive's article on this subject!
Topics: Roary the Racing Car, TV, US
333
333
Apr 22, 2021
04/21
by
Chapman Entertainment and Cosgrove Hall Films
movies
eye 333
favorite 1
comment 0
I previously uploaded this to gofile, but it looks like gofile can be a bit weird, so I just put it here. Check out the Lost Media Archive's article on this subject!
Topic: Roary the Racing Car
837
837
May 29, 2021
05/21
by
Chapman Entertainment and Cosgrove Hall Films
movies
eye 837
favorite 3
comment 0
This wasn't available online before, so I uploaded it here. Check out the Lost Media Archive's article on this subject!
Topic: Roary the Racing Car
51
51
Mar 13, 2022
03/22
by
Chapman Entertainment, Cosgrove Hall Films
image
eye 51
favorite 0
comment 0
In 2005, a pilot made to pitch David Jenkins' Roary the Racing Car was shown to TV bosses at an international broadcasting festival in Cannes. In it, there were differences in character designs, most notably, the colour of the main protagonist himself, Roary, who was green in this pilot instead of red.
Topic: Roary the Racing Car
3
3.0
May 20, 2021
05/21
by
David Leighton (ledeev001)
data
eye 3
favorite 0
comment 0
My 1997 Scalextric Escort Cosworth's wheels were looking a bit tired and wer loose on the axle, so I designed these 8 spoke replacements. The standard slick tyre fits straight on. NOTE: They're a tight fit. Now my Gossie is back on the track!
Topics: escort cosworth, scalextric, 1:32, scalextrics, Toys & Games, scalextric wheel, Racing car,...
3
3.0
Apr 2, 2021
04/21
by
David Leighton (ledeev001)
data
eye 3
favorite 0
comment 0
This is a receptacle for a Scalextric C8516 Digital Chip. I've designed it to fit the LMP Team car, in between the main chassis webs. How-to video here: https://youtu.be/nfCI2DI9mis
Topics: slot car, thingiverse, scalextric digital, scalextric, Toy & Game Accessories, DPR, racing car,...
4
4.0
Apr 1, 2021
04/21
by
David Leighton (ledeev001)
data
eye 4
favorite 0
comment 0
These are plastic parts to allow a 10 x 2mm neodymium magnet to be fitted to a piece of Scalextric sport track and a 20 x 1mm steel target plate to be attached to a wooden base board. The video shows you how to do it and what you need. https://youtu.be/PyQo5qctBgw
Topics: slot car, scx, model car, thingiverse, slot car track, Carrera132, rc car, Toys & Games,...
5
5.0
Mar 2, 2022
03/22
by
Dawson, Rachel
texts
eye 5
favorite 0
comment 0
27 pages : 22 cm
Topics: Roary the Racing Car (Fictitious character) -- Pictorial works -- Juvenile fiction, Roary the...
11
11
Jan 19, 2021
01/21
by
Donovan Rodriguez (ingdonovan)
data
eye 11
favorite 0
comment 0
Este es el marco de una butaca Type X racing. Solo modelo aun no impreso. This is a TYPE X RACING SEAT belt hole bezel. Just the model not printed YET.
Topics: racing, thingiverse, seatbelt, car, racing_car, Other, stl
9
9.0
Apr 28, 2021
04/21
by
Egil Kvaleberg (egil)
data
eye 9
favorite 0
comment 0
This air scoop was designed to enhance ventilation in a race car. It is connected to a flexible duct allowing a healthy stream of air to be directed at the driver. The design is fairly parametric, so you can change size and so on. A support is included in the STL, which must be cut off after printing. To skip the support or change anything else, use the customizer.
Topics: customizer, thingiverse, air_scoop, racing_car, stl, Automotive, racing
9
9.0
Apr 23, 2021
04/21
by
Flexbot (Flexbot)
data
eye 9
favorite 0
comment 0
This shock absorber is designed for small toy cars. All parts are 3D printed. Overall size: 10 X 10 X 48.5 mm. Maximum elasticity: 500g. Range (Maximum length): 10mm Tips: - Knife and tweezers will be used to remove the support when the printing is finished; - Speed glue will be used for solidifying axis and spring during installation; - If you want to reduce frication after the installation, lubricating oil would be a recommendation. See the short demo video here https://youtu.be/d4NvlZQhxjQ
Topics: 3D Printing, Toy_Cars, 3D_printing, Flexbot, stl, thingiverse, fun, hobby, racing_car
442
442
Nov 19, 2021
11/21
by
FremantleMedia
movies
eye 442
favorite 2
comment 0
A compilation video of the British Kids TV, judged by audience and British iconicism, musical production, nostalgia, and personal opinion. Live-action, puppets, hand-drawn animation, stop-motion animation, CGI, it's all covered: from Fireman Sam to The Family-Ness, Grange Hill to Going Live!, Postman Pat to Pocoyo, and Thunderbirds to Thomas the Tank Engine, you're sure to relive your childhood with this extensive compilation. 64 Zoo Lane The Adventure Game Andy Pandy Angelmouse The Animal...
Topics: 64 Zoo Lane, The Adventure Game, Andy Pandy, Angelmouse, The Animal Shelf, The Animals of Farthing...
5
5.0
Jun 13, 2015
06/15
by
Funny or Die
movies
eye 5
favorite 0
comment 0
Trans Sport Show 2008. April 16 - 20 Megatrade Hall, SM Megamall. The car show for enthusiasts by enthusiasts! Visit http://abmontierro00.googlepages.com/main.html.
Topics: Funny or Die Video Archive, 2008, ABMontierro, Aldrin, April 16, Auto restoration, Car, Hall,...
781
781
Dec 8, 2019
12/19
by
GSP Software
software
eye 781
favorite 4
comment 0
ISO image of the 2008 game Roary The Racing Car: Pitsop Puzzles, if this violates copyright in anyway, then 'll take it down.
Topic: Roary The Racing Car
4
4.0
Apr 1, 2021
04/21
by
Jan van de Locht (janvdl197)
data
eye 4
favorite 0
comment 0
This is an universal GoPro mount for your GEPRC KHX5 elegant. I printed it in extrudr flex hard. Any kind of flexible should work, though.
Topics: racing_drone, thingiverse, fpv, fpv_camera, Hobby, racing_car, fpv_racing, racing_quadcopter, stl,...
11
11
Apr 5, 2021
04/21
by
Jarred Marks (jarred1997)
data
eye 11
favorite 0
comment 0
This is a Lamborghini Aventador. This is a really cool car. If anyone would like me to try to post another car, comment the car below
Topics: thingiverse, lamborghini, car, lamborgini, Vehicles, racing_car, stl
6
6.0
Mar 18, 2021
03/21
by
John Darrigan (justicedspencer)
data
eye 6
favorite 0
comment 0
Just for fun and a little added detail
Topics: rock_crawler, crawler, RC_Car, rc_racing_car, stl, thingiverse, R/C Vehicles
5
5.0
Mar 5, 2021
03/21
by
Kyle Beddows (KizzaCBRR)
data
eye 5
favorite 0
comment 0
BREMBO Brakes keyring, enjoy!
Topics: keychain, racing_car, 3d_logo, logo, sportsbike, racing, motorbike, brembo, performance,...
3
3.0
Apr 4, 2021
04/21
by
Lightshadow Designs (Elsersy)
data
eye 3
favorite 0
comment 0
Racing car will be a good gift for your child. You can also print the wheel 4 times , the washer 8 times and the axles 2 times . Slide the axles into their holes and add the washers & the wheels; If the washers do not grip the axles, glue them to the axles or use some sticky tack to hold them in place. Set the INFILL to 15 per cent . Add supports to the rear wing , air intakes , axles , axle holes and wheels . If your slicer software can create tree-like supports, use these rather than...
Topics: thingiverse, racing, toy, Kids_Toys, games, stl, racing car toy box, racer, Construction Toys,...
391
391
May 8, 2012
05/12
by
MadMatty
movies
eye 391
favorite 0
comment 0
Not a bad racing game. World Tour mode was played. Not a massive difference between the modes. World tour just seems to add the ability to choose your race. A tad difficult in places mainly due to the AI cars that treat corners the same as a straight line. Annoying when I have to get out the car and push round a 90 degree corner and the ai just speed past ;) Some of qualifing times are unreal too, not taking into account the need to slow down. On last race I went into pits just to show it a...
Topic: Sega CD SegaCD MegaCD Mega Drive Genesis Console Jaguar XJ220 Racing Car Longplay Shortplay...
First Day
Topic: Milkshake Roary The Racing Car
9
9.0
Apr 27, 2021
04/21
by
Nathan Vince (natdognz)
data
eye 9
favorite 0
comment 0
A fast racer for all those future petrol heads out there.
Topics: Nissan, thingiverse, gtr, racing_car, stl, Automotive, nissan gtr
7
7.0
Jan 19, 2021
01/21
by
Nigel West (NigelWest)
data
eye 7
favorite 0
comment 0
This is my 1:18 Scale version of Daniel Norée's fantastic OpenRC F1. **3D Printed Parts:** I printed all of the 3D printed parts in PLA apart from the tires and the front wing which I printed in FFF World FlexiSMART. The PLA parts were printed with a 0.4mm nozzle, 0.16mm layer height, 2 shell/perimiters, 4 top layers, 4 bottom layers and 15% infill The rain tires were printed with a 0.4mm nozzle, 0.2mm layer height, 1 shell/perimiter, 4 top layers, 4 bottom layers and no infill The front wing...
Topics: racing, thingiverse, F1_Race_Car, R/C Vehicles, formula1, openrc, Racing_Car, stl, RC_Car
9
9.0
Apr 24, 2021
04/21
by
PER (WRRL)
data
eye 9
favorite 0
comment 0
Sometimes the best in-car GoPro location is on the diagonal bar off the B-pillar hoop. This simple OpenSCAD design is for a 1.75" bar diameter at 45-degrees from the horizontal. Printed horizontally on a MakerBot 2 with seven shells, 50% infill, support material, and a raft. Attach to bar with hose clamps, as shown. This race proven design provides a stable camera platform!!! See https://www.thingiverse.com/thing:2883682 for another mounting option.
Topics: WorldRacingLeague, roll_cage, GoPro_Mount, stl, Race_Car, FIA, SCCA, WRC, racing, 24hoursoflemons,...
46
46
Jun 25, 2010
06/10
by
Rabbit Zielke
audio
eye 46
favorite 0
comment 0
Chili Pepper Racing developed the first bio-diesel fueled professional touring car for the races here in Chattanooga. Along with setting world records and touring the race circuit, the car has been used to provide diversionary therapy for families facing pediatric cancer. From its inception, this race car was tied very closely to the Austin Hatcher Foundation and will now perform one final engagement as it goes on the auction block to raise funds for the Foundation. Around and About is a...
Topics: Austin Hatcher Foundation, bio-diesel racing car, Chili Pepper Racing, Barrett-Jackson Auction
69
69
Apr 10, 2014
04/14
by
Randomforum building Lego
movies
eye 69
favorite 0
comment 0
This is a mirror for youtube video with original file format that you can download! Another brand new lego! This video is so short so unboxing and building is in the same video Got this item at http://www.bricklink.com . From The Parts Resort store. Information of this set: Elements: 37 Figures: 1 Released: 2012 List Price: $4.99 (USD) My price: includes shipping) $3.33 USD 23 SEK Belongs to the LEGO CITY sets and Traffic. Really easy and simple to build, but what to expect from a promotion...
Topics: lego, unboxing, building, 30150, City, Racing Car
4
4.0
Mar 5, 2021
03/21
by
Ray Cornelissen (slantedrcdrift)
data
eye 4
favorite 0
comment 0
2-Piece 1:10 RC Rim Design by SlantedRC I've designed this as a two-piece wheel. The idea behind the design, is to use the same Barrel (inner-barrel and outer-barrel is one-piece) with different disc designs. This will enable you to use the same set of tires with multiple wheel designs, and also save you a ton of time and filament as you would only have to print the barrels once and each disc design separately. Small screws to be used to fix the disc to the barrel. Since I have not printed one...
Topics: 1-10_RC, rc_racing_car, stl, RC_wheels, RC_Car, R/C Vehicles, custom_rc_wheel, rc_drift,...
13
13
Sep 10, 2021
09/21
by
Rendle, Steve
texts
eye 13
favorite 0
comment 0
pages cm
Topics: Roary the Racing Car (Fictitious character) -- Pictorial works -- Juvenile literature, Automobiles,...
4
4.0
Mar 9, 2021
03/21
by
Robert Kern (robkern)
data
eye 4
favorite 0
comment 0
The **kbricks racing car** uses a subset of 26 parts of the [kbricks construction system](https://www.thingiverse.com/thing:3574234). It has a _functioning steering_ with a _cardan joint_ and can be used in combination with _figures of common toy lines_. Overall printing time has been some 24 hours. This [video](https://youtu.be/gH02-JBFZsw) shows how to assemble the model. _Explore more kbricks models on [YouTube](https://www.youtube.com/c/kbricks) and...
Topics: kbricks, openscad, Construction Toys, stl, thingiverse, bricks, racing_car, open_source,...
4
4.0
Apr 8, 2021
04/21
by
Roger (muellerr_ch)
data
eye 4
favorite 0
comment 0
an rc car has been on my 3d printing to-do list for a long time. sourcing the right parts for the existing models proved to be difficult. hence i designed my own car. this is the chassis for a 1/6 scale model of a volvo c30 that i intend to build. it has a total length of around 700 mm and a width of 300 mm. most of the off-the-shelf components are either from traxxas or hobbyking. the design mainly consists of the front and rear assemblies that are attached to a base plate that holds all the...
Topics: 3d_printed_rc_car, racing_car, volvo, c30, rc, stl, thingiverse, Radio_Control, rc_racing_car,...
8
8.0
Jan 20, 2021
01/21
by
Søren Backmann (Backmann)
data
eye 8
favorite 0
comment 0
This is a servo arm for the 18th Scale OpenRC F1. It fits on the 3,7g cheap ebay servos. I used my soldering iron to quickly melt the inside of the hole and quickly pushed the servo arm onto the servo to get the teeth marks inside. After that mount the screw and you are good to go raceing. Have Fun. A massive thanks to Daniel Norée aka Barspin for making the 1:10 scale F1. And Nigel West aka NigelWest for making the 1:18 scale version that I'm able to print on my small printer. (exept for the...
Topics: f1_racing_car_part, openrc_formula_1, thingiverse, f1_race_car_part, F1_Race_Car, OpenRC_F1, R/C...
