7
7.0
Jun 12, 2021
06/21
by
(PASTUBBS)
data
eye 7
favorite 0
comment 0
Summary I'm not making fun of people as the title may suggest. Just making it a bit easy for those with limited time on their hands. Print Settings Printer: MonoPrice Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .25 Infill: 60
Topics: thingiverse, ram_mounts, stl
3
3.0
Mar 19, 2021
03/21
by
(noskills)
data
eye 3
favorite 0
comment 0
Adapts the smaller 1 inch ball to the 1.5 inch one. I created this to accommodate the x-grip the larger mounts for better weight hold. The fun of this one is in the slicing, check out the settings below. Obviously print 2 halves.
Topics: Ram Mounts, thingiverse, Parts, stl
8
8.0
Jan 15, 2021
01/21
by
Jeremy Loveland (Wol_Gran)
data
eye 8
favorite 0
comment 0
This is a printable Ram mount part. https://www.youtube.com/watch?v=H4eQgElHNPY also made 1 with a solid end for more strength.
Topics: Parts, thingiverse, ram_mounts, stl
9
9.0
Apr 27, 2021
04/21
by
Gerry Bertrand (GerryPB)
data
eye 9
favorite 0
comment 0
Attaches ram mount to seat cross member at floor. I installed it and it seems to work well. It is designed for not having a passenger...it is quick to remove the post when needed. This has been in heavy daily use for a couple of years now and still works great. Here is a link to the Ram part that is used with it... https://www.rammount.com/part/RAM-316-HDR-18-202U
Topics: thingiverse, Tablet, Ram_mounts, stl, Ram_mount
10
10.0
Apr 22, 2021
04/21
by
Clint Kingston (iClint)
data
eye 10
favorite 0
comment 0
Replica of a Ram-Mount ball commonly supplied with GPS units.
Topics: Automotive, RAM_mount, stl, thingiverse, ram mounts
3
3.0
Mar 19, 2021
03/21
by
Julio Gonzalez (jegjunior)
data
eye 3
favorite 0
comment 0
Replacement feet for the Ram Mount Cell Holder Best printed in TPU or flexible material for best results and maximum hold
Topics: cell Holder, thingiverse, Other, ram_mounts, ram, stl
3
3.0
Oct 15, 2021
10/21
by
Clif Prager (cprager51)
data
eye 3
favorite 0
comment 0
This is a remix of the twist lock with stop modified for the ram mount. If you are grabbing the original twist lock connector SLT, I scaled it down to .29 to get it to fit on the end of the ram mount. I will likely create another set of STLs in the inverse with the ram ball containing the female end.
Topics: Hobby, thingiverse, rammount, ram_mounts, stl, RAM_mount
6
6.0
Jan 21, 2021
01/21
by
Peter Grace (petergrace)
data
eye 6
favorite 0
comment 0
I have a Smarti Pi Touch case for a Raspberry Pi and the official 7" touchscreen. The case has 75mm by 75mm mounting holes thar are VESA compliant. I want to mount the pi in my vehicle, and I already utilize RAM brand mounts, so this adapter should adapt the Smarti Pi Touch case to the RAM mounting system.
Topics: Electronics, thingiverse, RAM_mount, ram_mounts, stl, SmartiPi_Touch
9
9.0
Jan 17, 2021
01/21
by
Jared Wellman (jwellman)
data
eye 9
favorite 0
comment 0
1" Ball Mount (Typically used with Ram Mounts) for GoPro. Print with a durable material. I used Atomic CF PETG. 2 perimeters 20% infill No support needed.
Topics: Camera, thingiverse, gopro, ram, ram_mounts, gopro_mount, stl
4
4.0
Apr 16, 2021
04/21
by
Jukka Hellen (jhellen)
data
eye 4
favorite 0
comment 0
1" RAM ball mount for Jolla smartphones.
Topics: holder, ram_mounts, 3D Printing, phone, thingiverse, stl, jolla
11
11
Jan 18, 2021
01/21
by
Alex Denton (Lionshead)
data
eye 11
favorite 0
comment 0
This adapter connects an aircraft map light socket to 1" RAM Mount hardware. (Shout out to RAM Mounts for their excellent hardware!) The nominal size of the sockets is 3/8" (0.375) but every aircraft has worn differently. Hence, the multiple size. You will need a machine screw and nut to finish this. I also recommend threadlocker. My best results where with PET because of its excellent layer adhesion and sheer resistance. ABS split on the layer lines when people torqued the ball. This...
Topics: Tool Holders & Boxes, thingiverse, RAM_mount, ram_mounts, stl
11
11
Jan 16, 2021
01/21
by
Robert Silvers (rsilvers)
data
eye 11
favorite 0
comment 0
For RAM Mounts
Topics: phone, RAM, thingiverse, Mobile Phone, ram_mounts, iphone, stl
6
6.0
Jan 20, 2021
01/21
by
(Alioth)
data
eye 6
favorite 0
comment 0
This is a basic 1½ inch ball mount (ram mount C size equivalent). The screw holes are suitable for ¼-inch bolts in a square or triangular mounting pattern. You can insert a M6 50mm (or shorter) bolt into the hollow core for extra strength; apply glue or epoxy to the threads and the sides of the hex bolt. Naturally this mount won't be as strong as an off-the-shelf metal mount. Use at your own risk.
Topics: ball_mount, Automotive, thingiverse, RAM_mount, ram_mounts, mount, stl
10
10.0
Jan 18, 2021
01/21
by
Vio Marcu (Dashony)
data
eye 10
favorite 0
comment 0
Join 2 RAM Mount brackets with this piece. 1 inch Balls joint.
Topics: Accessories, thingiverse, RAM_mount_car, RAM_mount, ram_mounts, stl
5
5.0
Apr 16, 2021
04/21
by
Joshua (anon_maker)
data
eye 5
favorite 0
comment 0
Ram style 2.5" circular base mount with 1" ball. Made this to use with the ram compatible mount I found here, (http://www.thingiverse.com/thing:375381) to mount my humminbird fish finder.
Topics: ram_mounts, RAM, thingiverse, stl, DIY, ram_mount, ram_base
6
6.0
Apr 5, 2021
04/21
by
Robert Silvers (rsilvers)
data
eye 6
favorite 0
comment 0
For RAM mounts. This is easy to print if you orient the flat spots on the bed.
Topics: thingiverse, car, automobile, RAM_mount, stl, Automotive, ram_mounts, RAM, mount, car
5
5.0
Mar 4, 2021
03/21
by
Alexander Schönknecht (dirty__travel)
data
eye 5
favorite 0
comment 0
Triple Ball RAM Mount Printed in PETG with 0.2m layer height. 75% triangular infill for strength
Topics: offroad, ball_mount, ram_mounts, RAM_mount, thingiverse, Overland, mount, stl, Hobby
9
9.0
Jan 14, 2021
01/21
by
Floran Morel (Cheesepower)
data
eye 9
favorite 0
comment 0
Hello all, This support is made to fit exacly a Samsung Galaxy J7 2016 inside a RAM aquabox RAM-HOL-AQ1. This avoids the phone to fall inside the case and give a better reading of the display :-) You can use the tactical screen through the plastic film. (It is not very accurate). There is one place inside to add a portable battery. Just print it vertically with supports everywhere, 10% infill with PLA. Edit: Do not let it in direct sunlight! PLA is melting :-( The next one will be in ABS ;-)
Topics: RAM_mount, AquaBox, thingiverse, Hobby, stl, ram_mounts, samsung galaxy j7, motorbike
5
5.0
Jun 21, 2021
06/21
by
Alexander Schönknecht (dirty__travel)
data
eye 5
favorite 0
comment 0
Lost my Type-T mount for my Armor-X iPad Case and designed a new one with a RAM - Mount already included. Works like a charm and is already installed in the Truck. The M6 bolt in the middle is for extra torsion resistance at the week point. I printed PETG with supports at 0.2mm layer hight. Hope it will be usefull to somebody.
Topics: thingiverse, Armor-X, stl, ram_mounts, Case, RAM_mount, holder, Type-T, Tablet
4
4.0
Mar 21, 2021
03/21
by
Joshua (anon_maker)
data
eye 4
favorite 0
comment 0
This is a Ram 1" ball style top base mount for the humminbird Helix 5 fish finder. I made this to use with this - http://www.thingiverse.com/thing:375381
Topics: ram_mounts, fish_finder, ram, stl, helix_5, ram_mount, humminbird, thingiverse, DIY
10
10.0
Mar 9, 2021
03/21
by
Clint Kingston (iClint)
data
eye 10
favorite 0
comment 0
This Is a bracket for the 2014+ Super Tenere accessory bar or any other 11-13mm round rail. the hole pattern is for the Ram-Mount diamond base mounts which is used for many phone and GPS cradles and Ram-Balls. Pictured is the InReach Ram-mount cradle.
Topics: ram_mounts, Super Tenere, yamaha, stl, thingiverse, Automotive, yamaha_bike, motorcycles, RAM_mount
11
11
Jan 18, 2021
01/21
by
Christopher Tang (DeepfriedchriL)
data
eye 11
favorite 0
comment 0
I made this for my '08 R6 because I didn't like the options offered. So far its held up fine going 70+ mph while holding my 1+3T. ##### Update: I am nearing toward the end of a full riding season and have used this mount every time I was on my bike. Still holds up great and shows no signs of failure. ##### Update2: Checking in a little into my second season with this mount. Same mount still holding up fine. Print in PETG/ABS/outdoor friendly material. Print the ball touching the build plate....
Topics: motorcycle, Automotive, stem_mount, thingiverse, RAM_mount, motorcycle_mounts, ram_mounts, yamaha,...
3
3.0
Jun 20, 2021
06/21
by
Jons (Joens)
data
eye 3
favorite 0
comment 0
RAM Mount style ball system för pipes. Adapters for 22mm, 25mm and 28mm included. It's made for 33mm pipe that is the size of the Minn Kota bow mount motor, and also Haswing. I think it would fit most of the bow mount motors on the market. Use Yakfishers "arms" to make it complete. https://www.thingiverse.com/thing:3384911 Great work by him! M8 Neededparts: * M8 nut * M8 bolt aprox 50-55mm M6 Carriage bolt needed parts * M6 nut * M6 carriage bolt aprox 50-55mm Arm parts...
Topics: Fishing, Sport & Outdoors, minn_kota, boat, thingiverse, ram_mount, stl, MinnKota, ram_mounts,...
4
4.0
Mar 8, 2021
03/21
by
Stefan Oosterwold (stefs_engineering)
data
eye 4
favorite 0
comment 0
Simple bracket I made for my DL650 motorbike. I wanted the phone in a easy to reach and view position without it obstructing anything so I made this for that. Is easy to print without support materials and assembly takes 15/30 minutes. It is not required but recommend to remove the windscreen for the installation, takes a few minutes and makes it a lot easier.
Topics: phone holder, stl, thingiverse, suzuki, Sport & Outdoors, RAM mounts, Vstrom, x-grip, dl650,...
9
9.0
Jan 16, 2021
01/21
by
Bradley Gentry (radicalbiscuit)
data
eye 9
favorite 0
comment 0
**BE ADVISED**: The model I provide with a hole is too small to fit on the X-Grip if you're printing with a rigid material! I printed mine in flex to mimic the "squishiness" of the OEM rubber feet and made the hole slightly too small so my replacement part would have a very tight grip on the metal. Do not expect that part to fit if you print with anything other than a flexible filament. I should be adding another model soon with a hole appropriately sized for a rigid material. ---- I...
Topics: smartphone_holder, phone_holder, mobile_phone_holder, thingiverse, RAM_mount, Mobile Phone,...
11
11
Jan 18, 2021
01/21
by
Chris Ludwig (HechoEnIowa)
data
eye 11
favorite 0
comment 0
My friend Franklin designed this model using MS 3D Builder. He needed a Garmin to RAM 1" mount to replace a mount that was stolen. He used parts of the things below in order to put together his mount. It says "Iowa made" on the side in Chinese, a tweak to my username HechoEnIowa which means Made in Iowa in Spanish. The designer, Franklin, is Chinese-American. The Garmin ball may be slightly too small, so it may be necessary to scale up a little tiny bit, then sand the Garmin ball...
Topics: garmin_mount, thingiverse, Garmin_Nuvi, RAM_mount_car, RAM_mount, Replacement Parts, ram_mounts, stl
13
13
Jan 14, 2021
01/21
by
Brian Carrier (CerberusCTD)
data
eye 13
favorite 0
comment 0
This sandwiches between your Ram Ball diamond plate *RAM-B-238U*, and your Ram Quick Grip (Or any other Ram accessory with the diamond plates bolt pattern). It holds your Baofeng UV-5Rx radio adjacent to your phone so it's always within easy reach. You can use the belt clip to hold it more securely, but it with my testing it fits snugly while still being easily accessible. Something happened during file conversion that scaled it WAY down, make sure to rescale so the height (Y-Axis) is 1.5"...
Topics: RAM_mount, thingiverse, FirstBuild, Electronics, baofeng, stl, Baofeng_uv-5r, ram_mounts,...
3
3.0
Jun 12, 2021
06/21
by
EVAN DIXON (evanpdixon)
data
eye 3
favorite 0
comment 0
Modifications from original: Shortened by about 3/8" to allow belt clip to remain attached. Added pocket to secure belt clip for retention. Added RAM ball for more flexible mounting options. Printed on Ender 3 Pro in eSun PLA+ with 230 degree extruder and 60 degree bed with supports. 20% infill seemed plenty strong
Topics: Automotive, ft70d, rammount, ram_mounts, yaesu, ram_mount, thingiverse, amateur_radio, ft70,...
9
9.0
Mar 18, 2021
03/21
by
Mike Kurzawa (MadVampy)
data
eye 9
favorite 0
comment 0
Bought a RAM Mount laptop stand for my 2016 F150 work truck and didn't feel like paying for the caddy that went on the back to hold the laptop power supply so I designed my own. The screw slide holes lined up pretty good (might have to tweak yours depending on the material you use to print it). Not much more to say on this one.
Topics: Truck laptop, laptop, laptop_stand, Automotive, RAM, thingiverse, RAM_Mount, ram_mounts,...
2
2.0
Jul 22, 2021
07/21
by
Shannon Wilson (shannonw1988)
data
eye 2
favorite 0
comment 0
I designed this RAM mount for Garmin Striker Plus 4. It clips directly to the back of the unit and has a 1" ball mount which works with RAM mounts. the ball has been left slightly smaller than 1" to allow for heat shrink to be applied to the ball, this allows much better grip when tight so it won't move. the hole through the center allows a M4 x 35 mm screw with a hex nut for extra strength. Printing: Layer height 0.1mm Extruder temp 210c Print speed 40 mm/s Support - No Brim/Raft -...
Topics: Sport & Outdoors, garmin_striker, garmin, ram_mounts, stl, striker, RAM_mount,...
8
8.0
Apr 16, 2021
04/21
by
Bryson Jack (Bryson_Jack)
data
eye 8
favorite 0
comment 0
I needed a RAM Mount for my Samsung Galaxy S7 Edge. I found one here http://www.thingiverse.com/thing:1635388 but there were a few things about it that I felt could be improved: * Reduced the unnecessary height on the sides (top and bottom) of the back part. * Eliminated the weird booleans near the main clip. * Added a thumb tab which makes removal and mounting easier. * Added hex shapes for the nuts to aid in mounting. * Beveled sharp edges so it wasn't so deadly :) * Adjusted tolerances so it...
Topics: Galaxy S7 Edge, ram_mounts, phone, cradle, thingiverse, stl, Mobile Phone, mount, RAM_mount,...
4
4.0
Jun 21, 2021
06/21
by
Yak Fisher (YakFisher)
data
eye 4
favorite 0
comment 0
Here is a 'ball style' mount for the Lowrance 7 series of sounders. It is suitable for the Lowrance 7" Gimbal Bracket (part number 000-11019-001) which suits the following displays; Lowrance HDS Carbon 7, HDS-7 Gen 3, HDS-7 Gen2 Touch, Elite-7 CHIRP/HDI, HOOK-7 HOOK2-7 Printed using 4 perimeters and 70% 'Grid' style infill. The aluminium rod is knocked into place after applying some adhesive to the inner hole of the mount (See photos for example). This gives it 'peace of mind'...
Topics: Sport & Outdoors, fish_finder, depth_sounder, thingiverse, fishing, LOWRANCE, stl, ram_mounts,...
12
12
Apr 17, 2021
04/21
by
Steve Goyette (sgoyette)
data
eye 12
favorite 0
comment 0
This design is the result of wanting to mount my Icom 2720H faceplate with RAM mounts in my new Jeep JK. I have a proclip center dash mount (https://www.proclipusa.com/product/213499-proclip-center-mount-extra-strength-mounting-platform) that I put RAM balls on that I mount a variety of things on.
Topics: Ham_Radio, ICOM, ram_mounts, RAM_mount_car, amateur_radio, 3D Printing, thingiverse, stl, uhf,...
8
8.0
Jan 17, 2021
01/21
by
Jett Johnson (Jett0312)
data
eye 8
favorite 0
comment 0
This is made to adapt the stock LOWRANCE Fish Finder Hook 5 mount to the standard 1" Ram style mounting system that you can find on thingiverse or buy. Hope you like it.
Topics: fish, mounting_bracket, fish_finder, thingiverse, boat, Sport & Outdoors, LOWRANCE,...
3
3.0
Oct 14, 2021
10/21
by
Clif Prager (cprager51)
data
eye 3
favorite 0
comment 0
My coworker has an Icom ID-51 radio that he wanted to use with a ram mount. I took the only Icom ID51 mount on Thingiverse and blender'd it up with the RAM mount for GoPro thingi. I have also added the individual STL files for the Ram Mount Ball Hitch, the rear cone, and the holder. **v5: Parted out each component. Measured the clip and determined the clip channel through the cone must be at least 11mm. Not a blender expert so trying my best to hit that depth. I think I'm close, will confirm v4...
Topics: ram_mount_bike, thingiverse, Ham_Radio, RAM_mount_car, ram_mounts, stl, Audio, amateur_radio, ICOM,...
3
3.0
Jan 5, 2021
01/21
by
Jons (Joens)
data
eye 3
favorite 0
comment 0
Tested on Garmin Striker Plus 9sv Should fit: Garmin GPSMAP 8410 GPSMAP 8410xsv GPSMAP 8412 GPSMAP 8412xsv GPSMAP 8610 GPSMAP 8610xsv GPSMAP 8612 GPSMAP 8612xsv GPSMAP 922 GPSMAP 922xs GPSMAP 942 GPSMAP 942xs echoMAP Chirp 72-95 Series ECHOMAP Plus 92-97 Series Striker Plus 9sv Lowrance HDS Carbon 7 HDS LIVE 9 HDS LIVE 12 Hook Reveal 7 Series Hook Reveal 9 Series HOOK-9 Humminbird Fishfinders and GPS Chartplotters Raymarine Fishfinders and GPS Chartplotters RAM Track Ball to mount the ball:...
Topics: 115-F, Garmin, Garmin_GPSmap, Fish_Finder_Mount, stl, Echomap, ram_mounts, Humminbird, Raymarine,...
6
6.0
Jun 21, 2021
06/21
by
Yak Fisher (YakFisher)
data
eye 6
favorite 0
comment 0
Here is a complete 'Ball' mounting system for the Garmin Striker 5/7/9 Plus sounders. (Please check to see if yours has the circular ratcheting mount) It comprises of 6 printed pieces (2x WIngnuts) - 1" Ball Mount to Garmin ratcheting bracket - Left Arm - Right Arm - Top Wingnut - Bottom Wingnut - 1" track Ball mount The list of needed hardware is as follows; 1x M6 35mm 316 Stainless Steel Hex Bolt (10 x 5mm Head) 2x M6 40mm 316 Stainless Steel Hex Bolts (10 x 5mm Head) 2x M6 316...
Topics: Sport & Outdoors, fish_finder, thingiverse, fishing, garmin_striker, stl, garmin_mount, Ram,...
3
3.0
Jan 3, 2021
01/21
by
Frederik Klotz (Tintenfischmakrele)
data
eye 3
favorite 0
comment 0
Hallo miteinander, das hier ist ein Federdämpfer für das RAM Mount System. Dies ist nur eine Abwandlung von Version 2 . Mich störte es dass noch eine weitere Klemme benötigt wurde und das ganze nur unnötig groß wurde. Somit wurde der Hebel weg verlängert und die Federn müssten stärker sein was zu stärkeren Belastungen auf das Teil führte. Langzeitstabilität wird damit verringert. Daher ist auf einer Seite die männliche der weiblichen Klemme gewichen. Die Länge von Mitte Kugel zu...
Topics: 3D Printing, stl, Vibration_Dampers, B - Mount, Ram, SP Connect, damper, Quad Lock, Ram Mounts,...
3
3.0
Jan 7, 2021
01/21
by
Super Timor (supertimor)
data
eye 3
favorite 0
comment 0
A support compatible for dji spark, and mavic /mavic pro/mavis pro platinum to the B ball ram mount
Topics: R/C Vehicles, stl, ram_mounts, mavic, DJI_MAVIC, dji, mavic pro platinum, DJI_Spark, mavic pro,...
9
9.0
Jan 11, 2021
01/21
by
jaime Parés Cabeza (JAIMOTO)
data
eye 9
favorite 0
comment 0
Base soporte para manillar diseñado para el durísimo blackview bv6000, con diferentes tipos de enganche para poder llevarlos con seguridad y cómodamente en nuestros atv, utv, motos o bicis. Es muy resistente y esta pensado para aguantar el trato más duro. Para pegar las dos partes, usar cianocrilato en gel. permite unos segundos de movimiento para un buen ajuste y es algo mas elástico que el cianocrilato normal. COMPRAS RAM MOUNT...
Topics: JAIMOTO, bicycle, motorcycle, thingiverse, BV6000, Sport & Outdoors, motor_mount, BV 6000,...
5
5.0
Mar 16, 2021
03/21
by
Jacob S (Farmer_Jake)
data
eye 5
favorite 0
comment 0
The Slot in designed to be universal and fit more belt clips on items such as Walkie Talkies, HAM Radios, Phone Cases, etc. The ball attachment is a standard 1" ball that will work with most attachments in the RAM Mount Family. Shout Out to Caroline Metal Masters for the Gladiator JT Grab Bar Ball Mount and the Gladiator JT Side Mirrors with Ball Mount https://cmmoffroad.com/collections/j-t-gladiator/products/jt-grab-bar-ball-mount...
Topics: Sport & Outdoors, thingiverse, Jeep_JT, Jeep_Gladiator, Ram_ball, motorola, ball, handsfree,...
5
5.0
Apr 20, 2021
04/21
by
Guillaume F (iguigui)
data
eye 5
favorite 0
comment 0
Modélisation d'un pot à crayons permettant le recyclage vers le haut de barrette de RAM.
Topics: thingiverse, pen, design, Recycled, pencil, upcycle, bureau, recycling, pen_holder, desk, geek,...
