10
10.0
Mar 9, 2021
03/21
by
Leo Yeung (20sffactory)
data
eye 10
favorite 0
comment 0
Based on ftobler's original robot arm design, I have added a raspberry pi camera mount up front for some future work on basic computer vision. Original design: https://www.thingiverse.com/thing:1718984 My previous remix: https://www.thingiverse.com/thing:3328354 Support discussion group: https://www.facebook.com/groups/828749637471209/
Topics: raspberrypi, robotics, stl, thingiverse, robotarm, RaspberryPiCam, Robotics
4
4.0
Apr 13, 2021
04/21
by
(radd)
data
eye 4
favorite 0
comment 0
This fixture allows for the mounting of the Raspberry Pi camera. There is an extrusion on the back that allows two "L" brackets with 4-40 screws attach and pivot the mount.
Topics: thingiverse, Raspberry_Pi, 3D Printing, stl, RaspberryPiCam
6
6.0
Mar 2, 2021
03/21
by
Andreas Migamix (Migamix)
data
eye 6
favorite 0
comment 0
yet another Pi Camera case. i made this because i wanted a case and mount to be usable with several of the DogBone based mounts. but i also wanted to be able to change where i mounted it without any effort. you can have mounts all over your printer, and just slip the case from/to any new position you like. my version is much smaller, and i look at it as a protection box for the exposed piCam board. then i decided to make a mount that will hold this case, but not be inverted (cable from the top...
Topics: Raspberry_Pi, thingiverse, stl, RaspberryPiCam, 3D Printer Accessories
3
3.0
Apr 1, 2021
04/21
by
Marcel Meissel (linuxq)
data
eye 3
favorite 0
comment 0
I added a 80mm led ring to the camera mount
Topics: led ring, thingiverse, RAspberrypicam, 3D Printer Accessories, stl
8
8.0
Mar 19, 2021
03/21
by
(Geisel)
data
eye 8
favorite 0
comment 0
Flexible cam arm Scad file inculdes all Elements in different layouts except http://www.thingiverse.com/thing:218891. Uniboard compatible(20mm screwholes).
Topics: K8200, thingiverse, RaspberryPiCam, 3D Printer Accessories, Uniboard, stl
3
3.0
Oct 15, 2021
10/21
by
zach lerew (carvellwakeman)
data
eye 3
favorite 0
comment 0
*Disclaimer:* I am posting this before I have completed this project. I will probably update this post once I've completed the project. Still waiting on a replacement solar panel & battery. And waiting on 3d printer parts because my printer is down. Hello! Thanks for viewing. This is a "trail" camera that I've configured more like a dash camera that uploads footage to a local NAS over FTP. Its job is to be mounted in the top of my aviary to take timelapses/stream my birds....
Topics: RaspberryPi, Outdoor & Garden, thingiverse, trailcam, stl, RaspberryPiCam, bird
4
4.0
Apr 12, 2021
04/21
by
(nbasse)
data
eye 4
favorite 0
comment 0
A mount for a RaspberryPi Cam NoIR with IR-LEDs from [Ebay](http://www.ebay.com/itm/Night-vision-infrared-IR-LED-Board-for-NoIR-rapsberry-pi-camera-module-/281607383791?), designed to fit a Rigidbot, that will follow the X-carriage up and down while printing. The arm is hollow to allow for the video-cable and LED power-cable to go through it and then through the metal bar the rods are attached to. (I will then eventually mount a cable chain on the other side that will carry the cables) (Note,...
Topics: thingiverse, RaspberryPi, 3D Printer Accessories, Rigidbot, stl, RaspberryPiCam
3
3.0
Jan 9, 2021
01/21
by
jean-christophe (calagan57)
data
eye 3
favorite 0
comment 0
Ceci est une modélisation de coque pour la "Raspberry Pi Camera à vision nocturne FIshEye 5MP avec 2 IR" vendu chez Kubii. En effet elle n'a pas les même dimensions que les autres caméras à vision nocturne. https://www.kubii.fr/cameras-accessoires/2270-raspberry-pi-camera-fisheye-grand-angle-5mp-kubii-3272496011823.html J'ai aussi créé un support pour fixer sur un pied de la table Ikéa Lack (ou tout autre support à angle 90°) Les pièces de liaison/articulation sont issues...
Topics: thingiverse, RaspberryPiCam, stl, 3D Printer Accessories, raspberry_pi_camera, camera_mount
5
5.0
Mar 22, 2021
03/21
by
Avery Ruel (IndieAstronaut)
data
eye 5
favorite 0
comment 0
I noticed a lot of the pi cam mounts on here required pretty tight printing tolerances in order to mount the board and attach the ribbon cable successfully and I just wasn't having any success producing them on my Ender 3. This model provides a decent amount of clearance around the perimeter of the camera board and the camera itself as well as a wide opening for the ribbon cable to extend out of. Note that the Pi Camera 2.1 mounting holes are 2mm in diameter but I only have M2.5 raspberry pi...
Topics: stl, picamera, picam2, raspberry_pi_camera, Electronics, Raspberry_Pi, thingiverse, RaspberryPiCam
3
3.0
Mar 19, 2021
03/21
by
Carlos Ricco (lcricco)
data
eye 3
favorite 0
comment 0
I've been struggling to find a good PiCam mount to my Ender 3 without using the z-axis, which makes it havier. So I came across these 2 files: https://www.thingiverse.com/thing:4138414 (by maxdeangelis) and https://www.thingiverse.com/thing:3014982 (by PLG_Design). So, it's a remix of the frame mount from the PLG_Design) and the camera mount you can find in the link above.
Topics: camera_mount, picamera, thingiverse, raspberry_pi_camera, RaspberryPiCam, 3D Printing, camera, stl
3
3.0
Apr 1, 2021
04/21
by
Niklas Forsberg (ForsbergCustoms)
data
eye 3
favorite 0
comment 0
A mount for the raspberry pi cam mainly designed to use in a Ikea Lack enclosure. Comes in 3 different angles, 20,30 and 35 degrees and Includes a cable organizer
Topics: RaspberryPiCam, thingiverse, camera_mount, Octopi_camera, raspberry_pi_camera, 3D Printer...
5
5.0
Mar 4, 2021
03/21
by
Peter Vazny (peter_v)
data
eye 5
favorite 0
comment 0
As title says, this is housing for RPi Camera with [HDMI to ribbon adapter](https://www.amazon.com/gp/product/B06XDNBM63/). It is made to snap hold the RPi cam + HDMI adapter assembly in the case. The lid is snap hold only too. Its is pretty tight and hard to remove, so make sure you are ready to commit. The mount is made to fit the [Prusa MK3 Camera Bed Mount Arm](https://www.thingiverse.com/thing:2728660/files) The reason to make it all snap fit is because the screws, nuts and stand offs that...
Topics: stl, 3D Printer Accessories, RaspberryPiCam, HDMI, Picam, RPi_camera_v2, rpi_camera, thingiverse
8
8.0
Jan 20, 2021
01/21
by
Victor Hu (Misericordia)
data
eye 8
favorite 0
comment 0
This is a mount for a Raspberry PI Camera Module. Behind the module is a LEGO Mindstorms axle connector. I used this to put it atop a Mindstorms Servo motor, allowing it to spin 360 degrees.
Topics: Mindstorms_NXT, LEGO, nxt, thingiverse, Raspberry_Pi, Mindstorms_EV3, RaspberryPiCam, 3D Printing,...
8
8.0
Apr 30, 2021
04/21
by
Auffret Antony (antonydbzh)
data
eye 8
favorite 0
comment 0
utile pour mettre au point la caméra du raspberry Pi V1. Créé sur Tinkercad : https://www.tinkercad.com/things/eAmdDrGj60a-anneau-de-mise-au-point-picam à partir de ces deux sources : - Un autre outil pour les Picam V1 et V2 http://www.thingiverse.com/thing:1570865 - Le même pour la Picam V2 : http://www.thingiverse.com/thing:1941802
Topics: stl, Picam, raspberry, raspicam, Raspberry_Pi, RaspberryPiCam, raspberry_pi_camera, picamera,...
8
8.0
Jun 20, 2021
06/21
by
Michael Olson (mwolson)
data
eye 8
favorite 0
comment 0
Snap fit enclosure for RPi Camera module v2 with m3 mount on back so you can attach it to whatever, whichever side up you please. m3 nut 8mm m3 screw for the tripod mount, if you have too long a screw you can reverse it so the nut is outside, uglier, but functional.
Topics: rpi_rpicam, picam2, thingiverse, Picam, raspberry_pi_camera, picamera, raspicampi, stl,...
1
1.0
Apr 19, 2022
04/22
by
Kevin Jernigan (ReverendRhyme)
data
eye 1
favorite 0
comment 0
Remixed to fit the arms for "Camera Mount for Anycubic Vyper" https://www.thingiverse.com/thing:5147960
Topics: RaspberryPiCam, thingiverse, raspberry_pi_camera, anycubic_vyper, 3D Printer Accessories, Anycubic,...
3
3.0
Mar 13, 2021
03/21
by
Casey Rinehart (JediRebel)
data
eye 3
favorite 0
comment 0
Saw notes from another Remix of this stand, requesting an updated version to fit Pi Cam 1.3 or later. This has an opening that should accommodate anything between V1.3 and V2.1 of the Pi Cam.
Topics: Picam, 3D Printer Accessories, thingiverse, raspberry_pi_camera, picam2, RaspberryPiCam, stl,...
8
8.0
Apr 16, 2021
04/21
by
John Thompson (JGTMaker)
data
eye 8
favorite 0
comment 0
So if you are not using OctoPrint served from a RaspberryPi to drive your 3D printers, you are missing out! It is absolutely the easiest and most convenient way to get the printer setting and code from your computer to the build plate! *I am in no way associated with this open source project or any of its contributors. I am simply an avid user and fan of this great tool.* It is easy to setup and even easier to use. [Get OctoPrint here](http://octoprint.org/) and [support the cause...
Topics: octopi, Octoprint, Flexible_arm, RaspberryPiCam, thingiverse, Octoprint_Camera, stl, balljoint, 3D...
8
8.0
Jun 20, 2021
06/21
by
Bryan Varner (varnerrants)
data
eye 8
favorite 0
comment 0
It's a camera case for raspberrypi zero boards with an integrated M12 mount for CCTV lenses. If you don't want to use a CCTV lens, the shroud is short enough to not impede the normal camera lens field of view. After using several other cases, mounts, and styles -- I broke down and made my own because I'm picky. **Features** * Captive SD Card. * Sliding case back, with detents to hold it closed. * Go-Pro style mount * M12 CCTV Mount * LED holes for the camera recording light, and the pwr / act...
Topics: RaspberryPi_Camera, thingiverse, CCTV, Raspberry_Pi_Zero_W, stl, RaspberryPiCam, Camera,...
10
10.0
Jan 18, 2021
01/21
by
Indy L (indyToronto)
data
eye 10
favorite 0
comment 0
This is a mount for raspberri picam that you install onto octoprint. Note that all the parts are generic and can be used for other printers if you print the last part that connects to your printer. Don't print the part that says DONOTPRINT - it's a diagram for assembly instructions. This prints at 0.0875 or 0.175 layer heights. Generally the only part that you should print at 80% infill is the M8x15mm bolt. Others can be printed at 20% - or if you rally want them stiffer, use 1.2mm for wall...
Topics: Picam, raspberry_pi_camera, 3D Printer Accessories, thingiverse, MPSM, RaspberryPiCam,...
7
7.0
Jan 20, 2021
01/21
by
George Hansen (casualTanker)
data
eye 7
favorite 0
comment 0
A simple holder for the PiCam v2, that simply clips on to the frame of the Blocks Zero 3D printer. Camera case should be assembled with at least two 10mm M2 screws w/nuts. Beneficial with a longer PiCam cable than the standard 15cm one. You also need to make feet for the Blocks Zero, to run the USB cable from the Raspberry Pi (or the like) to the printer board. For instance: https://www.thingiverse.com/thing:2925073
Topics: case, Picam, 3D Printer Accessories, thingiverse, picam2, holder, RaspberryPiCam, Picam_v2, Blocks...
4
4.0
Apr 1, 2021
04/21
by
Bas Imagineer (Imagineer_NL)
data
eye 4
favorite 0
comment 0
This is a remix of 2 components as well as a combination of others. Remix: Added the backplate of the "Raspberry Pi Camera Case and Mount for Mini Kossel" to the "Ender3 Flexi PiCam mount" Combination: added the cooling holed backplate to the needed set, to enable a fully printable camera mount in one download.
Topics: mount, RaspberryPiCam, thingiverse, camera_mount, raspicam, 3D Printer Accessories,...
10
10.0
Jan 18, 2021
01/21
by
Olaf Kaus (OlafKa)
data
eye 10
favorite 0
comment 0
A housing for the raspberry pi NoIR Camera V2. It has 10mm white LEDs and 5mm IR LEDs. The light is controlled via a custom made Octoprint Plugin. The mounting angle fits to the left side of the Z-axis holes of my ANET E10. So if the Z axis move the camera is also moving up. With the "mounting" ball the case is adjustable in several direction. In the picture there is an older version with a too small ball.
Topics: Raspberry_camera, raspberry_pi_camera, 3D Printer Accessories, Noir, thingiverse, RaspberryPiCam,...
7
7.0
Jan 20, 2021
01/21
by
Dominic Cordeiro (Dominic_C)
data
eye 7
favorite 0
comment 0
This print allows you to mount an Rpi camera on servos. (And servos on servos)
Topics: tower_pro_9g, Tower_Pro_SG90, Servo_Mount, stl, Tower_Pro, thingiverse, RaspberryPiCam, 3D...
3
3.0
Jan 19, 2021
01/21
by
Andreas Klostermann (Bayesian)
data
eye 3
favorite 0
comment 0
This is a quick and dirty adapter to put a microscope objective onto a c/cs mount camera/sensor like the new Raspberry Pi HQ camera mount. I have virtually no clue about optics, so this might not be optimal in any shape or form. In any case, you need to print the adapter with a very small layer size in order to ensure the threads work. Also you must clean the piece thoroughly before mounting, because loose pieces of material might damage your optics or sensor. Attached is a picture I took with...
Topics: raspberry_pi_camera, photography, Camera, microscopy, thingiverse, Raspberry_Pi, macro_photography,...
1
1.0
Apr 20, 2022
04/22
by
Joshua Koelker (Papa_Oso)
data
eye 1
favorite 0
comment 0
This is a thinner version of PI Camera (Fits Voron 2.4). Use at your own discretion, it has not been tested yet but will soon be tested on a 350. all parts that extend above the bed are 8.5mm thick max and are as close as possible to the plexiglass panels. Also the ribbon cable runs through the center of the arm. There is a standard size and an extended version (8mm longer) for those with kinematic bed mounts. No supports necessary if your bridge settings are on point.
Topics: 3D Printer Parts, RaspberryPiCam, 2020_mount, thingiverse, raspberry_pi_camera, Picam,...
4
4.0
Apr 13, 2021
04/21
by
Stephane Watre (swatre)
data
eye 4
favorite 0
comment 0
Support for Zortrax to set a Rapsberry Pi and PICAM. Not for OctoPi not compatible with Zortrax. Other parts to fix the Raspberry Pi on Zortrax http://www.thingiverse.com/thing:611270
Topics: thingiverse, Raspberry_Pi, 3D Printer Accessories, Picam, raspberry_pi_case, Zortrax, holder,...
4
4.0
Jan 6, 2021
01/21
by
Rainer Brehm (Rainerlan_2)
data
eye 4
favorite 0
comment 0
I found a lot of PiCam mounts for Ender 3 (Pro), but none of them suited all my needs: - close to the left hand side of the printer, so that my 50cm ribbon cable is sufficiently long - Moving with the z-axis - Simple fixation on the printer without needing to open any screws or nuts - Working fine with HMG5 dual axial fan and PM MDD v1.3 x-axis carriage So I used some of the ideas in models I found and made my own camera fixation. The part which I used almost as-is, was the cam holder from...
Topics: Picam, stl, creality_ender_3, rpi_rpicam, Ender_3, picamera, thingiverse, Ender3, Ender_3_Pro,...
3
3.0
Jan 20, 2021
01/21
by
Blaablaaguy (blaablaaguy)
data
eye 3
favorite 0
comment 0
Pi Camera v1.3 mount for the Ender 3, its clones, and other compatible Creality machines. Clips on to the X axis stepper mount. STLS and STEP files available. NOTE: Not compatible with the v2 Pi Camera Required Hardware: 3x M3x12 Screws 3x M3 Nuts
Topics: 3D Printer Accessories, camera, thingiverse, picamera, Raspberry_Pi, Ender3, Creality_CR-10,...
11
11
Jan 9, 2021
01/21
by
Thomas Karner (karnschi)
data
eye 11
favorite 0
comment 0
I designed a mount for my PI Cam so that I can make better time lapse videos of my prints
Topics: thingiverse, RaspberryPiCam, octopi, stl, 3D Printer Accessories, raspicam, mount, enclosure,...
3
3.0
Jun 11, 2021
06/21
by
Nicholas LaPenn (nlapenn)
data
eye 3
favorite 0
comment 0
This is a raspberry pi HQ camera m43 adapter. The HQ camera circuit board screws on to the base (the 4 corner holes). You may need to take off the C/CS mount rings and other hardware for it to fit. Next, you screw on the lock ring all the way to the bottom (this has somewhat tight tolerances but it'll loosen up ones you get it on and screw it on and off a few times). Finally, put on the adapter piece and add a lens. The lens adapter and lock ring screw on in opposite directions so that you can...
Topics: Olympus_lens, camera, rpi_rpicam, Olympus, RaspberryPiCam, panasonic_lumix, Camera, thingiverse,...
9
9.0
Jan 14, 2021
01/21
by
JiltedGeek (JiltedGeek)
data
eye 9
favorite 0
comment 0
Still prototyping this design. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5GDrlIpBeia
Topics: raspicam, picamera, rpi_rpicam, camera_mount, thingiverse, RaspberryPiCam, 3D Printer Parts, mount,...
8
8.0
Apr 17, 2021
04/21
by
joel einhorn (sjowol)
data
eye 8
favorite 0
comment 0
I could not find a good PiCam mount to attach the cam to my Anet A8 and to use with OctoPrint so I made this UPDATE 10/19/2017: As the initial one was a bit large (It did not fit under the x-axis) I made a smaller (more compact) version. Also I found there are cams that have n LED and some don't there are 2 different fronts now. And as a bonus there are slots for the hinge on either side of the clamp.
Topics: Raspberry_Pi, Octoprint, Anet_A8, Octopi_camera, RaspberryPiCam, Picam, thingiverse,...
4
4.0
Apr 13, 2021
04/21
by
(_Tobi)
data
eye 4
favorite 0
comment 0
This is an adjustable camer mount for the raspberry pi camera version 2. It is variable in every angle, hight adjustable and moves up and down with the x-axis. Cableclips are proivded and fitted for the boom to prevent cables from dangling around. #Materials# ##What you will need to copy my design:## 1x M3x50mm 1x M3x30mm 2x M3x15mm (Not needed for the version without height adjust) 1x M3x8mm 4x M3 Nut 1x M2x16mm 1x M2 Nut Optional: M3 washers to distribute the force more evenly. ##What you...
Topics: thingiverse, adjustable_camera, 3D Printer Accessories, rpi_rpicam, Adjustable, Picam, picam2,...
6
6.0
Mar 4, 2021
03/21
by
Gen Cab (GenCab)
data
eye 6
favorite 0
comment 0
Check out my etsy store. https://www.etsy.com/shop/HotSquare The is a Raspberry Pi Camera 2 mount. It was original intended for use on a Prusa MK2s but has evolved a bit in the past year. I thought it was time to share. There is some remix in this but I cant figure out whom the original camera frame came from. I wanted 2 axis of movement to adjust my camera. This mount will allow just that. You need to print it out of anything stronger than PLA. Parts are oriented for best results but feel free...
Topics: thingiverse, raspberry_pi_camera, raspicam, picam 2, picam mount, 3D Printer Accessories,...
9
9.0
Apr 30, 2021
04/21
by
JP Lereboullet (Z122)
data
eye 9
favorite 0
comment 0
Key for adjusting sharpness of Raspberry Pi cameras V2.1 original lenses. This part can fit and can be hold in the window of some existing cases (like the ones in following links). Otherwise, it can also be manually holded. Clef pour ajuster la netteté des objectifs originaux des caméras V2.1 Raspberry Pi. Cette pièce est ajustée et peut être maintenue dans les fenêtres de différentes boites existantes (comme celles mentionnées dans les liens suivants). Sinon, elle peut être aussi...
Topics: Z122, Raspberry, RaspberryPi_Camera, dagoma, Raspberry_Pi, action_cam, 3D Printer Accessories,...
11
11
Jan 15, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 11
favorite 0
comment 0
UPDATE 14/08 : changed all the parts and arms in order to have better strenght and a soket for the M4 nut, needed, nuts and 30mm m4 bolts fully adjustable, just print more arms and parts. it's a mess but u just have to figure out the parts that mos suits ur needs and print, and if u end up needing others just print and add them :) to mount: -needed 2-4 m4 10mm bolts,(can use the spare two tnuts u got with the printer). a bunch of 30mm m4 bolts with nuts depends on the number of arms. mount...
Topics: t_slot_nut, GoPro_Mount, 3D Printer Accessories, raspicam, action_camera_mount, picamera,...
