3
3.0
Mar 25, 2021
03/21
by
Ohai Ohai (ohaithear)
data
eye 3
favorite 0
comment 0
Your [Pwnagotchi](https://www.pwnagotchi.ai/) needs a home? This is it! (^‿‿^) Fourteen versions of the case are included: * Inky display. * Inky display with a carabiner loop. * Inky display slimagotchi mod. * Inky display slimagotchi mod with a carabiner loop. * Waveshare display (v1/v2). * Waveshare display (v1/v2) with a carabiner loop. * Waveshare display (v1/v2) with a PiSugar 1200mAh battery. * Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop. * Waveshare...
Topics: stl, Raspberry_Pi_Zero_W, thingiverse, hacking, pwnagotchi, Gadgets, PiSugar, Raspberry_Pi_Zero
3
3.0
Apr 20, 2021
04/21
by
L. Tollgreef (SolarGermany)
data
eye 3
favorite 0
comment 0
Since I didn't like the manual adjustment of my old night vision telephoto lens camera ( https://www.thingiverse.com/thing:3422950 ), here is my new 9g servo driven version! The system can still be equipped with an 8x or 12x telephoto lens, and has a pan and tilt control... I use this system to observe a few magpies (cool birds) on ~ 200m/600feet in their tree... Features: * Costs for everything together only (incl. RPI Zero) ~40€/45$ * Completely printable! (Only the screws supplied with the...
Topics: thingiverse, Kamera schwenken, no extra screws, telephoto lens, raspberry pi 3, tilt, gü,...
6
6.0
Jan 15, 2021
01/21
by
Leon Anavi (anavi)
data
eye 6
favorite 0
comment 0
This is a simple open source case for your Raspberry Pi 0 and Raspberry Pi 0 W. The case prevents dust while in the same time it allows good air flow. The case allow attaching various add-on board on top of the Raspberry Pi. The microSD card can be quickly and easily removed without disassembling the case. ANAVI Mini Raspberry Pi Zero Case has been designed with the free and open source software OpenSCAD. The unit on the photos has been printed with PLA on Prima Creator P120. The source code is...
Topics: raspberry, Raspberry_Pi_Zero_W, thingiverse, Electronics, RaspberryPi, raspberry_pi_housing, stl,...
8
8.0
Jan 18, 2021
01/21
by
Marco Marco (atomant_)
data
eye 8
favorite 0
comment 0
I made this adapter to use standard tactile switches with the design created by kapakai (https://www.thingiverse.com/thing:2406507).
Topics: Video_games, Raspberry_Pi_Zero, videogame, Video_Game_Console, buttons, Gameboy,...
3
3.0
Jul 25, 2021
07/21
by
Thiemo Schuff (Starwhooper)
data
eye 3
favorite 0
comment 0
Adapterboard to bring Raspberry Pi Zero to a Full size Board. Usefull in case on additional adapter like my Rackmount: https://www.thingiverse.com/thing:4879316 I used this Micro-USB to RJ-45 Adapter (3,50€): https://de.aliexpress.com/item/1005002828547838.html note: I changed the USB via again a longer one.
Topics: Computer, thingiverse, Pi_Zero, Raspberry_Pi_Zero, raspberry, stl, Raspberry_Pi, Raspberry_Pi_Zero_W
7
7.0
Jan 16, 2021
01/21
by
Omid (Omidontop)
data
eye 7
favorite 0
comment 0
# Raspberry Pi Zero W Wireless Security Camera I have designed this housing to use it as a monitoring tool for my 3D Printer. It is very easy to print and there are tons of different solutions to use to be able to see the real-time video on your PC or smart phone. ## Ingredients - [Raspberry Pi Zero W](https://www.raspberrypi.org/products/raspberry-pi-zero-w/) - [Raspberry Pi Camera V2.1](https://www.raspberrypi.org/products/pi-noir-camera-v2/) - [Raspberry Pi Zero W 40mm Camera...
Topics: 3D Printers, housing, camera, 3d printer, thingiverse, raspberry pi, security camera, raspberry pi...
1
1.0
Jan 19, 2022
01/22
by
O. Bakerman (breadbaker)
data
eye 1
favorite 0
comment 0
Bracket for mounting a Pi Zero inside an Amiga 600. Holes have hex inserts below that will fit a M2.5 nut. Attaches with a small strip of double-sided mounting tape* so you don't have to murder your Amiga case. *I use 3M extra strong mounting tape and had no problem removing it without leaving residues.
Topics: RGB2HDMI, Raspberry_Pi, thingiverse, amiga_600, RPi_Zero, Commodore_Amiga, Pi_Zero, Amiga,...
6
6.0
Apr 17, 2021
04/21
by
Nikolaj Kappler (miege95)
data
eye 6
favorite 0
comment 0
I wanted to use a raspberry pi zero (w) as I had already lying one around and also it is much cheaper and smaller than the normal pi. Also I didn't need a relay (yet) so I included mounts for a small DC 12V to 5V USB converter (which I also had lying around from a car project), to power the PI directly from the printers PSU. (I was getting fed up to unplug my bedside lamp and phone charger every time I was going to print something because I had no spare power strip :D ) Cables need a little...
Topics: Octoprint, Anet_A8, 3D Printer Parts, thingiverse, Raspberry_Pi_Zero_W, anet_a8_parts, stl,...
7
7.0
Jan 18, 2021
01/21
by
Finn Pannkoken (whyismynameallwaystaken)
data
eye 7
favorite 0
comment 0
This is a backplate replacement for the Anet A8 with mounting points for a Pi Zero (W) plus one of those cheap'o DSWY2596 voltage regulators. It goes well with the top Part of one of those slim cases, but I can't remember which one I printed. It has additional holes for cable straps and push-in slots for cables.
Topics: 3D Printer Parts, Raspberry_Pi_Zero, Anet_A8, Raspberry_Pi_Zero_W, thingiverse, Raspberry_Pi,...
6
6.0
Jan 15, 2021
01/21
by
Lukas Peterson (Estivio)
data
eye 6
favorite 0
comment 0
This is a backcover for the LCD Screen on the Anet A6 with integrated Raspberry Pi Zero W and RPi Camera 1.3. I use this for Running OctoPi on the Raspberry. 19.01.2018: Added a version with just 3mm holes instead of the M3 nut inserts. You will need: • RaspberryPi Zero W • RPi Camera 1.3 (I got mine from aliexpress.com) • Camera Cable Zero to RPi Camera 1.3 (This is a special cable to use the small Camera input of the RPi Zero like this one: https://goo.gl/8MQoxh) •The screws that are...
Topics: Raspberry_Pi_Zero, Anet_a6_parts, USB_case, camera_mount, anet_a6_upgrade, raspberry,...
8
8.0
Jan 17, 2021
01/21
by
Todd Lowe (ltlowe)
data
eye 8
favorite 0
comment 0
This is a remix/mix of parts from two Raspberry Pi Zero +Camera mounts: https://www.thingiverse.com/thing:2285502 https://www.thingiverse.com/thing:2433291 I'm using it with an AnyCubic i3 Mega, but there is nothing specific for that printer because it attaches with a 3M CommandStrip, Changes: 1. I added a socket mount from 79DieselRabbit to RaspberryPI_MOUNTV2 by dktosoch. 2. I found that the original socket bracket was too flexible when the ball was in place so I made it thicker to put more...
Topics: 3D Printer Accessories, stl, Anycubic_I3_Mega, Raspberry_Pi_Mount, thingiverse,...
9
9.0
Jan 19, 2021
01/21
by
jon rogers (jonprogers)
data
eye 9
favorite 0
comment 0
Camera mount to attach Pi Zero and camera on adjustable mount to rise with the z axis as the print continues. Motion software (https://sourceforge.net/projects/motion/) installed on pi to provide webstream,.
Topics: 3D Printer Accessories, Anycubic_I3_Mega, Raspberry_Pi_Zero_W, thingiverse, i3_mega_webcam,...
5
5.0
Jan 18, 2022
01/22
by
Victor Leupold (Vince_Standard)
data
eye 5
favorite 0
comment 0
This is an I3 Mega S all-in-one holder for the Raspberry PI Zero 2 and the Pi Camera V2. I use it for Octopi. The holder gets clamped to the left side of the I3 Mega S. The Pi Zero 2 Case can be slided onto the side of the clamp. The Camera case can be mounted on a ballhead. Its hard to push on, but its fit and can be adjustet for the perfect camera angel. You dont need any tools to install this. I remixed the pieces from here: https://www.thingiverse.com/thing:3950698 I printed the Pi Zero...
Topics: I3_MegaS_Camera, Raspberry_Pi, Anycubic, Octopi_camera, thingiverse, I3_MegaS_camera_mount,...
3
3.0
Jan 5, 2021
01/21
by
Martin Laža (curly_cz)
data
eye 3
favorite 0
comment 0
Case for RPi Zero or Zero W and RPi camera V1.3(tested) or V2(not tested) with adapter to 1.25" focuser. Needed hardware: 10pcs M3x8 countersunk screw for case 2pcs M3 nut for case 4pcs M3x10mm standoff for case 4pcs M2x3 screws for camera mounting
Topics: astrophotography, Other, stl, Pi_Zero, Raspberry_Pi_Zero_W, webcam, raspberry, thingiverse,...
9
9.0
Jan 18, 2021
01/21
by
doug paradis (paradug)
data
eye 9
favorite 0
comment 0
After making the "LEGO attachable Raspberry Pi Zero W case" (thing: 2732553), I thought that an interface plate for projects not made of LEGOs would extend the usefulness of the case. The LEGO interface makes the Rpi Zero W case easily detachable, which can help with troubleshooting or the temporary use of the board in another project. The plate attaches using two screws. It fits "real" LEGOs and the case described in "LEGO attachable Raspberry Pi Zero W case"...
Topics: case, raspberry_pi_case, LEGO, Raspberry_Pi_Zero_W, thingiverse, RPi_Zero_W, Rpi, Robotics, stl
2
2.0
Jun 7, 2021
06/21
by
London Dobbs (Londonium2021)
data
eye 2
favorite 0
comment 0
Just a super basic pi cam stand and holder with a hole in the back for the camera cable.
Topics: Raspberry_Pi_Zero_W, Octoprint, thingiverse, raspberry_pi_camera, 3d_printer, stl, 3D Printing
2
2.0
Mar 25, 2021
03/21
by
(marigu)
data
eye 2
favorite 0
comment 0
Big custom 7 segment display made of 56 + 12 neopixels(WS2812W), driven by Raspberry Pi Zero W. It is approx. big as A4 paper(landscape). Each segment is made of 4 WS2812B leds(just split WS2812B strip to segments with 4 Leds on it). It is driven by Rpi Zero W(WiFi version) and running python3 code. I have used some level converter between Rpi and WS2812 pixels as LED strip are 5V and Rpi IO 3.3V. You can mount it on the wall(recommended), there is option to connect power cable from bottom or...
Topics: neopixel, 7segment, Pi_Zero, 7_segment_display, Electronics, WS2812b, segment, RPi_Zero, stl,...
5
5.0
Mar 2, 2021
03/21
by
Andrew Yeshnik (Yesh_Indeed)
data
eye 5
favorite 0
comment 0
This is a edit of [dktosoch's Raspberry Pi holder](https://www.thingiverse.com/thing:2433291) . **Revised 10/16/2018 - there was slight interference between the arm and the extruder. I believe that the origin of that problem was the R3 extruder housing redesign on August 2018. The revised mount moves the raspberry pi closer to the centerline. I liked dktosoch's design but it did not fit my machine. I recently changed the bed on my printer from the supplied 6mm diameter solid spacers to a set of...
Topics: prusa_i3, prusa_i3_mk3, Raspberry_Pi, raspberry_pi_camera, thingiverse, mount, stl,...
10
10.0
Jan 11, 2021
01/21
by
David Mottram (Dimwit-Dave)
data
eye 10
favorite 0
comment 0
Prototype board for Raspberry Pi. Frame Size is 180mm x 141mm x 7.2mm Parts MB-102 Solderless Breadboard 4off Rubber feet 12mm plus screws DC-DC Buck Converter Step Down Module LM2596 Power Supply 2.1mm Jack Socket WARNING Please Check the Power Supply's output before connecting to your Pi! Adjust for 5V FIRST! Other Breadboards Breadboard for Arduino Uno or Nano With Regulator - http://www.thingiverse.com/thing:2321197 Breadboard for Arduino Mega or Uno With Regulator -...
Topics: Raspberry_Pi_Zero_W, thingiverse, Electronics, stl, breadboard, Raspberry_Pi
2
2.0
Mar 10, 2021
03/21
by
(MikeOnBike)
data
eye 2
favorite 0
comment 0
Pi Zero W Security Camera Camera features: uses the onboard wireless but you could add a USB alternative not waterproof, designed for hot environment hence the ventilation uses cronjob to run script that schedules cronjobs to turn the IR on/off for daylight/dark Using this camera but this is a newer version that has a third photo-cell so the IR Cut filter switches in and out automatically: https://www.amazon.com/gp/product/B07D8S6JRH No third photo-cell here:...
Topics: Raspberry_Pi_Zero_W, stl, thingiverse, Camera
6
6.0
Mar 2, 2021
03/21
by
Adam Starbuck (starbuck93)
data
eye 6
favorite 0
comment 0
I think the Pi zero gets pretty warm without any assistance so drop one of these fans into the Pigeon case and plug it in or solder it to the Pi zero. Made to fit a 5v 30x30x7mm fan such as these https://smile.amazon.com/gp/product/B0792BW2VH/ I made the slots a little wider so it does not *really* require screws to put the back plate into the case. Mine is just press-fit. I used 3 M2 screws and nuts to hold the fan in place. Feel free to edit the Fusion 360 file and post a remix!
Topics: camera, raspberry_pi_case, ip_camera, raspberry_pi_zero, thingiverse, stl, motion_sensor, pi zero,...
1
1.0
Jan 18, 2022
01/22
by
Adilson Luvizotto Filho (zeluvizotto)
data
eye 1
favorite 0
comment 0
Case destinada a Rasp Pi Zero W conjugada com 1 placa de rede e 1 placa com 3 USB! -2 modelos de tampas Modelo 1 com Fan Modelo 2 Com saída para Dissipador + Pinos de solda
Topics: raspberry_pi_poe, Raspberry_Pi, raspberry_pi_case, thingiverse, usb, raspberry, rj45, Electronics,...
2
2.0
May 1, 2021
05/21
by
Andy Maurer (mason_swiss)
data
eye 2
favorite 0
comment 0
Mini Case for MMDVM with Raspberry Pi Zero W and Waveshare Li-Ion Hat. Between the MMDVM and Raspberry Pi Zero i used the 22mm stands, between the Pi and the Waveshare Li-Ion Hat the 11mm. The stands are printed, but I cut a M3 thread in each. Temperatur from the whole thing is around 43.3°C / 109.9°F and it runs for about 2 hours with the battery (more or less) but you can run this thing also with a 5V Powersupply. Parts you need: 1x Raspberry Pi Zero W 1x MMDVM P25 DMR with OLED Display 1x...
Topics: stl, MMDVM Oled, DMR_hotspot, Raspberry_Pi, Raspberry_Pi_Zero_W, Electronics, MMDVM, thingiverse
1
1.0
Sep 13, 2021
09/21
by
Jeremy Elson (jelson)
data
eye 1
favorite 0
comment 0
This is a case for mounting a PMS5003 particulate sensor and a Raspberry Pi Zero W. It is part of DIY air quality monitoring system I built that collects PM1.0, PM2.5 and PM10.0 particulate data every second and stores it in a database. The case has builtin standoffs for the Pi Zero compatible with M2.5 screws. It also has 4 M2.5-compatible screw holes for attaching the cover. The case has cutouts for a power cord, the sensor's intake fan, and the 4 holes in the sensor for air outflow. The...
Topics: stl, thingiverse, PMS5003, Air_Quality, Raspberry_Pi_Zero_W, raspberry_pi_case, particulate_sensor,...
7
7.0
Jan 18, 2021
01/21
by
Robert Fleming (Rfleming918)
data
eye 7
favorite 0
comment 0
I wasn't entirely happy with the Pi Zero cases I found elsewhere, so I made my own in OpenSCAD. I've included the .scad file should someone like to tweak it to their requirements. Designed to use some #2 pan head machine screws I had on hand. Included .scad file has parametric stuff for changing to a different screw size, or adjust to your printer's tolerance if necessary. A few versions of the top and bottom, either closed or with access for heat sink/gpio pins. The heatpad version is intended...
Topics: Electronics, rpi_zero_case, openscad, Raspberry_Pi_Zero_W, thingiverse, stl
6
6.0
Apr 17, 2021
04/21
by
Pavel Dyntera (Maxinoha)
data
eye 6
favorite 0
comment 0
Krabička pro Raspberry Pi Zero nebo Zero W s logem KODI. Návod pro instalaci OS + KODI: https://www.maxinoha.cz/xbmc-multimedialni-centrum-2/
Topics: Czech_Republic, thingiverse, Raspberry_Pi_Zero_W, stl, Pi_Zero, Raspberry_Pi_Zero, Electronics,...
6
6.0
Jan 17, 2021
01/21
by
Mikro Mx (Mikro-mx)
data
eye 6
favorite 0
comment 0
Started from the design of Nobularkid (https://www.tinkercad.com/users/fZoEnyQDH2h-noobularkid) as base for the measurement of the Raspberry Pi Zero case. https://www.tinkercad.com/things/5nnJVElX8uX-raspberry-pi-zero-case- The case is then built with Tinkercad. The support for the PiCamera Infrared has been designed with OpenScad for a previous project and then imported and improved in Tinkercad. Link to the Tinkercad version: https://www.tinkercad.com/things/exUqxZ8GcAQ
Topics: raspberry_pi_case, thingiverse, raspberry_pi_zero, raspberry_pi_zero_w, seedstudio_2mic_phat,...
1
1.0
Jan 18, 2022
01/22
by
Huw Reddick (huwred)
data
eye 1
favorite 0
comment 0
I wanted a case to mount my Raspberry Pi Zero W and a UPS hat on my Tronxy printer. It also has a hole for a Start/Stop button (11mm dia) in case I need to shutdown the Pi quickly.
Topics: UPS-Lite, thingiverse, UPS, Raspberry_Pi_Zero_W, stl, 3D Printer Accessories
1
1.0
Dec 14, 2021
12/21
by
Florian Nagel (AllPro3D)
data
eye 1
favorite 0
comment 0
Hello Makers! I am running Klipper on my "Ender 3 V2 Competition" with several sensors, endstops, etc. hooked up to the Raspberry Pi Zero W GPIO pins. Looking around, I couldn't find a case that would: 1) Cleanly bolt to the 4040 extrusions 2) Properly fix the pi in place without need for additional screws 3) Provide a clean cable route for GPIO-attached cables I therefore went ahead and designed my own case from scratch. For the looks, I based it loosely on the case designed by...
Topics: 4040, Octoprint, octopi, stl, creality_ender_3, GPIO_access, thingiverse, Creality,...
6
6.0
Jan 20, 2021
01/21
by
NW Longstreet (NWLongstreet)
data
eye 6
favorite 0
comment 0
Castle PiSkull [Edit] I've included two files, one with ports for a Raspberry Pi Zero, and one with without port cutouts. Went through a few versions before I got it right(ish). Also had a jam or two. I also used walls and a rock patio from elsewhere on thingiverse, and I will track those down and link them later. The rpi holder doesn't attach to the castle exactly, I just glued the sucker. Also made the holder a bit taller to line up better I used PLA for the main model and PETG for the base....
Topics: masters_of_the_univer, Raspberry_Pi_Zero, rpi, raspberry_pi_case, rpiz, remix, Raspberry_Pi_Zero_W,...
10
10.0
Jan 11, 2021
01/21
by
Anathae Townsend (Anathae)
data
eye 10
favorite 0
comment 0
*** Updated *** Two piece case for raspberry pi zero, ten by five pips long by wide, one block high. Two designs for the top and bottom, one with and one with out cutouts for the forty pin gpio. I have not had a chance to print this out yet, as my printer is off line. ** update ** Corrected the spacing of everything and added features on the underside to be more consistent with the construction block system I am trying to be compatible with. Added sketchup model that was used as well as a...
Topics: Raspberry_Pi_Zero_W, thingiverse, Electronics, Raspberry_Pi_Zero, stl, lego_compatible, Raspberry_Pi
6
6.0
Jan 16, 2021
01/21
by
Andrew Fisher (afisher1972)
data
eye 6
favorite 0
comment 0
Made this to go in my Ikea Lack enclosure. It allows a Raspberry Pi Zero W to be mounted along with a Pi mini camera. I needed a better view of the build plate so made it articulated. It screw to the wooden leg just above the lack riser. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lb2YLiqmVsO
Topics: Raspberry_Pi_Zero_W, thingiverse, 3D Printing, stl, corner, mount
3
3.0
Mar 21, 2021
03/21
by
Mark Greenwald (DataDink)
data
eye 3
favorite 0
comment 0
WARNING: This upgrade taps into the printer's power supply so make sure you comfortable/capable to work with electronics safely. This upgrade makes the CreatorPro wireless via OctoPi. Fastens to the back of the FlashForge CreatorPro using the existing screws Houses the following components: * LM2596S Step Down Converter: * Raspberry Pi Zero W / OctoPi Screws are M2.5 to fit the component board holes. The converter taps into the printer's power supply. (this requires opening the bottom panel of...
Topics: raspberry pi zero w, stl, wifi, 3D Printer Accessories, creator pro, FlashForge, knarco, octoprint,...
6
6.0
Jan 15, 2021
01/21
by
Jason Tersigni (jtersigni)
data
eye 6
favorite 0
comment 0
Remixed a great design by Lantis and made it a so that it can be mounted to the top front rail of the D-Bot printer for a downward view of the build plate. Stays nicely out of the way. M3 screw and nut to attach ball joint to pi case. 2x M5 screws and square nuts (you know the one) to attach pi case to frame. Initial issues: - The mounts for the M5 to rail are a little thin - I used 3xM5 washers to accommodate - this can easily be remixed to increase the depth...I'm just too lazy. - Would...
Topics: Raspberry_Pi_Zero_W, thingiverse, 3D Printing, D-bot, dbot, stl, Raspberry_Pi_Zero,...
4
4.0
Mar 2, 2021
03/21
by
Walter Nachname (opaque01)
data
eye 4
favorite 0
comment 0
Housing for a Raspberry PI Zero W day and night live stream cam. Details on https://www.instructables.com/id/Day-and-Night-View-Live-Stream-Cam/
Topics: Camera, raspberry_pi_zero_w, thingiverse, survival_cam, stl, ir_camera
2
2.0
Jan 9, 2021
01/21
by
Kou kun (Kou_kun42)
data
eye 2
favorite 0
comment 0
This is a simple housing for a DreamPi setup using a Raspberry Pi Zero W. I wanted a way to fit both the usb modem and the pi in a small form factor and that's what this is. I'm using the usb modem with a voltage inducer attached that I purchased from https://dreamcastlive.net/shop/ and I've forgone the usb cable and soldered a connection directly to the pi. I added a spot to the lid where you can reuse the clear plastic for the lights so you know if everything is working. Just use a drop of...
Topics: Raspberry_Pi_Zero_W, thingiverse, stl, DreamCast, Video Games, case, Raspberry_Pi, dreampi
3
3.0
Jan 7, 2021
01/21
by
Colin Dow (cdow)
data
eye 3
favorite 0
comment 0
This Raspberry Pi Zero W case and code creates a browser accessed dashboard for your filament dry box. Print out the parts in PETG, ABS or PLA. Wire up a DHT 11 temperature / humidity sensor and place sensor inside the dry box. The 2nd, 3rd and 4th far side pins of the Raspberry Pi Zero W are used as they are inline and allow for easy wiring from the outside to the inside of the dry box (see wiring diagram). The Raspberry Pi goes on the outside using the Front and Back parts. The Inside plate...
Topics: stl, drybox, thingiverse, Raspberry Pi Zero W, 3D Printer Accessories
3
3.0
Apr 20, 2021
04/21
by
(printminion)
data
eye 3
favorite 0
comment 0
Please if you printed this give me a shout by uploading picture of your print ;) Modeled in Fusio360, printed with Prusa MK3 Not standard fit. The wiring will be very tide in order to achieve slim profile. Right now it's a custom solution without any ribbon cables (In the video there are no cables 00:23 yet). For inspiration (https://pinout.xyz/pinout/inky_phat) I'm going to model another cover (soon ) in order to fit standard ribbon cable. Not standard fit. The wiring will be very tide in...
Topics: thingiverse, stl, enclosure, Raspberry_Pi_Zero, inkyphat, DIY, Pimoroni, RPi_Zero,...
4
4.0
Mar 4, 2021
03/21
by
(printminion)
data
eye 4
favorite 0
comment 0
Currently there are two covers types * slim (soldering needed) * large (no soldering) Please if you printed this give me a shout by uploading picture of your print ;) Modeled in Fusion360, printed with Prusa MK3 https://youtu.be/WHZQte4B1yA Order on Shapeways (without logo): * [Enclosure with slim cover](https://www.shapeways.com/product/FB38M3F8G/enclosure-for-pimoroni-inky-what-and-raspberry-pi?optionId=83324972) * [Slim...
Topics: Pimoroni, inkywhat, RPi_Zero, Raspberry_Pi_Zero, DIY, thingiverse, enclosure, stl,...
1
1.0
Dec 13, 2021
12/21
by
Ben Tr (Tneb)
data
eye 1
favorite 0
comment 0
Remix of [eoyilmaz's LCD enclosure + Raspberry Pi Case](https://www.thingiverse.com/thing:4586351) I wanted to have the raspberry sit at the bottom of the case to allow more space to place items on top of it. Tried to learn FreeCAD to directly edit the files but it was a disaster so redid the entire model in Fusion 360. I also added different placement holes to place a Raspberry Pi Zero (or the new second generation one) inside. Feedback welcome.
Topics: Raspberry_Pi_2, stl, Raspberry_Pi_Zero_2_W, Ender_3_Pro, thingiverse, Raspberry_pi_3,...
6
6.0
Jan 19, 2021
01/21
by
Zohaib Mirza (zcubed)
data
eye 6
favorite 0
comment 0
Milo5000's Einsy case mod was great but I was having issues putting in my RPi with a heatsink mounted. The modded lid allows for a heatsink extending at least 4mm above the MK3 PI frame so around 7mm total in height for the heatsink. The additional space also allows for easier removal of the SD card with pliers or really precise fingers. I have also included two different sizes for hub mounts. One fits a 26mm X 18mm X 61mm hub which I use for just ethernet connectivity. The larger one fits a...
Topics: 3D Printer Parts, Raspberry_Pi_Zero, raspberry_pi_case, usb_hub, Raspberry_Pi_Zero_W, thingiverse,...
4
4.0
Mar 13, 2021
03/21
by
Rod Kimmell (Rkimmell73)
data
eye 4
favorite 0
comment 0
R1 Initial Release This is a FlightAware ADS-B Ground Station using a Raspberry Pi Zero W, PiAware software and an FlightAware ADS-B USB receiver. May be mounted vertically by drilling out the two internal mounting holes. Parts required 1 - Raspberry Pi Zero W or WH with power supply. 1 - FlightAware Pro Stick Plus ADS-B USB Receiver (with or without built in filter) + MicroSD with PiAware reloaded. (Amazon) 1 - Micro USB (male) to USB 2.0 (Female) OTG cable...
Topics: thingiverse, ADSB, Raspberry_Pi_Zero_W, stl, Raspberry_Pi, Electronics
4
4.0
Mar 18, 2021
03/21
by
Frantisek Brabec (fandabrabec)
data
eye 4
favorite 0
comment 0
This is a box and watering adapter for a 4-plant automated watering system built around Raspberry Pi Zero W. Each plant is monitored and watered independently. A web-based chart tracks activities over time. The box accommodates Pi, four moisture sensor board, 8 channel relay, analog-digital converter, MicroUSB board and eight 3.5mm audio jacks (four to attach the moisture sensors, four to connect the pumps). The box also includes posts for four boards to distribute Vcc and GND among all the...
Topics: watering, Outdoor & Garden, home_automation, thingiverse, water_pump, stl, Raspberry_Pi_Zero_W
7
7.0
Jan 18, 2021
01/21
by
Collin Clark (CaptNumbNutz)
data
eye 7
favorite 0
comment 0
This is a Game Boy Advance Cartridge Blank with vents designed for the FreePlay Zero and FreePlay CM3 Project by Ed Mandy. For the uninitiated, these are full Raspberry Pi systems running Retropie inside a Game Boy Advance shell. More information about this product can be found here: https://www.kickstarter.com/projects/1227007236/freeplay-zero-freeplay-cm3-by-freeplaytech https://www.freeplaytech.com/ More information about my particular build can be found here:...
Topics: Raspberry_Pi_Zero, Video Games, game_boy, Raspberry_Pi, Gameboy, Raspberry_pi_3, FreePlay_CM3,...
2
2.0
Jun 21, 2021
06/21
by
B Roth (Vaulter98c)
data
eye 2
favorite 0
comment 0
This is a basic SNES-style version of the shoulder buttons as part of my custom button series for the GPi case. This replaces the L and R buttons on the back of the case with a profile modeled after an 8BitDo SNES controller making it easier to find and press but not changing the feel of the case as a whole much. This design works for both sides so only one model is included for the button, as well as the peg that gets glued into the slot of the button. I would suggest when you print however to...
Topics: Video Games, GPi_Case, thingiverse, Raspberry_Pi_Zero_W, stl, retroflag, Raspberry_Pi_Zero
6
6.0
Jan 19, 2021
01/21
by
J.L V. (Movilujo)
data
eye 6
favorite 0
comment 0
##Gafas de Visión Nocturna (GaViNo) - Night Vision Goggles Night Vision Glasses created with a Raspberry Pi Zero W, an IR camera compatible with Raspberry and some infrared LEDs. More information on my blog: https://robotstyles.blogspot.com/2018/04/gavino-unas-gafas-de-vision-nocturna-diy_19.html (in Spanish) https://youtu.be/KlPgmI-__Sc Code: https://github.com/movilujo/gaVino
Topics: google_cardboard, Night_vision_goggles, Raspberry_Pi_Zero_W, thingiverse, Camera_IR, FreeCAD, 3D...
7
7.0
Jan 18, 2021
01/21
by
Marco Marco (atomant_)
data
eye 7
favorite 0
comment 0
I switched the clip to an easier to print screw hole and added two mounts for tactile switches to be used as shoulder buttons.
Topics: RPi_Zero, Raspberry_Pi_Zero, Video_games, Gameboy, Raspberry_Pi_Zero_W, thingiverse, videogames,...
9
9.0
Jan 14, 2021
01/21
by
Tsubasa Nagashima (Rittai3D)
data
eye 9
favorite 0
comment 0
This 3D printed bracket is compatible with LCD controller board found in back up monitor (44mm x 44mm) The purpose of this part is to provide insulation between the LCD panel and the controller board. Please ensure that your controller board is smaller than 44mm x 44mm. Custom size/design available on request.
Topics: Raspberry_Pi_Zero_W, thingiverse, 3D Printing, Pi_Zero, rpi, game_boy, stl, Raspberry_Pi_Zero,...
9
9.0
Jan 14, 2021
01/21
by
Tsubasa Nagashima (Rittai3D)
data
eye 9
favorite 0
comment 0
This 3D printed bracket is compatible with LCD panel back up monitor (77mm x 64mm) The purpose of this part is to position the LCD panel to the housing. Please ensure that your LCD panel is 77mm x 64mm. Custom size/design available on request.
Topics: Raspberry_Pi_Zero_W, thingiverse, 3D Printing, Pi_Zero, rpi, game_boy, stl, Raspberry_Pi_Zero,...
2
2.0
Mar 16, 2021
03/21
by
Matthias Kasper (MatziK)
data
eye 2
favorite 0
comment 0
Gehäuse für Raspberry Pi Zero WH mit einem Waveshare 2.7inch E-Ink/E-Paper display HAT for Raspberry Pi. Es passen das Display schwarz/weiß (SKU: 13354) und schwaz/weiß/rot (SKU: 13357). Der Raspberry und das Display werden mit M3x6mm Schrauben montiert. Case for Raspberry Pi Zero WH with a Waveshare 2.7inch E-Ink/E-Paper display HAT for Raspberry. The displays black/white (SKU: 13354) und black/white/red (SKU: 13357) can be mounted. For mounting the Raspberry and the display use M3x6mm...
Topics: waveshare e-ink, waveshare_case, raspberry pi zero, 3D Printing, e-ink, thingiverse, e-paper,...
