3
3.0
Jan 7, 2021
01/21
by
Ahmad Nur Firmansyah (Kidokie)
data
eye 3
favorite 0
comment 0
just a request to design cover and inner filter for exhaust
Topics: Parts, stl, respirator, Respirator_adapter, 3M_Respirator, thingiverse, respirator_filter
3
3.0
Apr 4, 2021
04/21
by
Daniel Cruz (LAZERCRABS)
data
eye 3
favorite 0
comment 0
A quick 3M style adapter mean to be used with 3M Respirators. Use to create your own fabric filter cartridges as an alternative to normal fabric masks.
Topics: thingiverse, respirator_filter, respirator, stl, Other, 3M_Respirator
39
39
texts
eye 39
favorite 0
comment 0
3M Air Mate User Instructions
Topics: Medical Support Equipment, Respirator, 3M Respirator
3
3.0
Jun 11, 2021
06/21
by
Projeto FabriCAC (ProjetoFabriCAC)
data
eye 3
favorite 0
comment 0
Adaptador para filtro REX800. Peça modelada no Fusion360. Solução para respirador que se encontra parado por falta de insumos da cadeia produtiva. Nosso objetivo é dar suporte para o combate da COVID-19 criando soluções através da materialização digital. Para saber mais @fabricac_. Adapter for REX800 filter. Part modeled on Fusion360. Solution for respirator that is stopped due to lack of inputs in the production chain. Our goal is to support the combat of COVID-19 by creating...
Topics: REX800, respirator_filter, Other, thingiverse, respirator, Respirator_adapter, filter, stl
4
4.0
Apr 4, 2021
04/21
by
Steven Doye (Skippy111taz)
data
eye 4
favorite 0
comment 0
Here are some adapters that will fit on the 3M brand respirators. These are to help DIY'ers with getting creative to make filters and filter systems to attach to the mask. There is 5 in total: 1. 3M to North Filter 2. 3M to 10mm Spigot 3. 3M to 15mm Spigot 4. 3M to Cap 5. 3M to Pop Bottle (will require sealant on the bottle threads or a 25mm OD o-ring) The North brand version can be found here https://www.thingiverse.com/thing:4236882 I recommend printing with abs and giving it a vapor bath to...
Topics: thingiverse, adapter, respirator, stl, DIY, Respirator_adapter, covid-19, 3M_Respirator
4
4.0
Jan 9, 2021
01/21
by
Josh (spaceman_josh)
data
eye 4
favorite 0
comment 0
This is a clip to hold the top strap of 6000, 6500, and 7500 series respirators. (This was designed using measurements from a 6500 series, no guarantee of fit. 1.4 mm x 12.6 mm strap measured). If you're using your respirator for COVID protection this will make you look like a normal paranoid person instead of an idiotic paranoid person with the strap flapping around on top of your head. But it does work very well.
Topics: thingiverse, stl, respirator, 3M_Respirator, Accessories, strap
3
3.0
Mar 13, 2021
03/21
by
Federico Espinola (Fheder)
data
eye 3
favorite 0
comment 0
Anatomically compatible mask prototype using 3D Scanner technology, the mask dimension in the .STL file is not correct, the design should measure 130mm high, the size of the holes is calculated to measure 36mm in diameter, if someone is able to correct these errors I will be very thankful, includes a 3M N99 Filter adapter and a mask cap for sealing one of the holes and all Fusion360 files as well. better results using elastic filaments such as TPU (thermoplastic Polypropylene) in the mask and...
Topics: thingiverse, respiratory_mask, respirator_filter, respirator, protective_mask, 3M_Respirator, stl,...
3
3.0
Apr 4, 2021
04/21
by
(AgapeModeling)
data
eye 3
favorite 0
comment 0
Scott® AV-2000/3000 SCBA Bayonet to Dual 3M™ Bayonet Adapter ==================================================== This prototype design for a Scott® AV-3000 SCBA bayonet to a dual 3M™ bayonet adapter, as requested firefither32. Designed to help cross compatibility of commercial off the shelf (COTS) filters with other manufacturer’s respirators during this PPE shortage. In this particular instance an adapter for self-contained breathing apparatus, that many fire departments use, can now...
Topics: thingiverse, Parts, adapter, respirator, stl, SCBA, Respirator_adapter, Scott, 3M_Respirator,...
3
3.0
Jun 7, 2021
06/21
by
Vector Prime (VectorP)
data
eye 3
favorite 0
comment 0
Unix Filter To 3M Mask Adapter Адаптер для подсоединения российского фильтра Unix на маски 3M Внимание! Требуется резиновое уплотнение для байонетного соединения и проверка. (проверяйте герметичность) -- Концепт. Не для реального применения. Автор не несет ответственность за любые прямые...
Topics: 3M_Respirator, COVID19, respirator, Unix_Respirator, thingiverse, stl, covid-19, adapter, 3D...
4
4.0
Apr 28, 2021
04/21
by
Giuseppe Portelli (gportelli)
data
eye 4
favorite 0
comment 0
These decorated filter caps are available in single or multicolor with 3 clearances (snug, medium, loose). They fit these masks: https://www.thingiverse.com/thing:4225667 https://www.thingiverse.com/thing:4273395 https://www.thingiverse.com/thing:4282744 https://www.thingiverse.com/thing:4363681 For the multicolor print use the files ending in Color 1, Color 2. # Multi-Color printing I took this how-to in multicolor printing from this design: https://www.thingiverse.com/thing:3723561 I don't...
Topics: thingiverse, respirator_filter, respirator, stl, Parts, respiratory_mask
5
5.0
Apr 4, 2021
04/21
by
Christian Hanson (CRHsculpt)
data
eye 5
favorite 0
comment 0
DIY Respirator set using the top of a 2 liter pop bottle for the body (instructions Pending). Parts designed to be printed without need for supports. Intake filter housing is made of two parts: the body, and the cover. The intake body threads on to a standard 2 liter blow molded bottle, i.e. a common pop bottle. The cover threads onto the other end of the body, and can hold one or two standard 5.5 cm cotton makeup pads, which can be used as a filter. Any other material can be cut to size to add...
Topics: thingiverse, respirator_filter, respiratory_mask, respirator, stl, DIY
3
3.0
Apr 3, 2021
04/21
by
Peter Schmelcher (peter120)
data
eye 3
favorite 0
comment 0
A two part filter design intended to increase the filter surface area. More effective filtering media has greater resistance to air flow and by increasing the filter area it easier to breath. April 9 2020: added a reusable threaded cage to hold the filter edges closed. Scale the bolt to create a little more nut clearance like 0.9975 The adapter thread is M32x1.5 DIY solution if you can't get standard 3M filter cartridges. This adapter allows me to attach other filter media to my 3M mask...
Topics: thingiverse, respirator, Tools, stl, 3M_Respirator
3
3.0
Apr 4, 2021
04/21
by
Bela Durucz (thedeveloperguy)
data
eye 3
favorite 0
comment 0
I had a long-running debt for the community: I made a halotherapy mask 2 years ago and I used a 3M mask as a base and had to buy original filter cartridges. Howto is here: https://www.instructables.com/id/Halotherapy-Mask/ But sacrificing a totally new filter cartridge is waste. Long story short: the covid-19 pandemic came and I ran out of paper masks, so HAD to make a 3M bayonet compatible custom filter. I already tested it, 4 layers of industrial filter fits great. ~4 hours of print time per...
Topics: thingiverse, Parts, respirator, stl, 3M_Respirator
3
3.0
Mar 5, 2021
03/21
by
Derry Hamilton (rasilon)
data
eye 3
favorite 0
comment 0
The spectacle adapter for 3M (style) respirators are a little hard to come by, but as a chemist who occasionally needs them, they're a lot safer than contact lenses. This mount is very similar to the official ones, but can be printed, and thus doesn't involve being annoyed at suppliers. I printed the brackets in PLA, and the frame in TPU. The wires are 1.5mm; I used nitinol since it was to hand, and means they're nearly unbreakable. The frame was designed around the lenses out of an old pair of...
Topics: stl, Parts, 3M_Respirator, respirator, gasmask, 6800, thingiverse
3
3.0
Apr 1, 2021
04/21
by
Nathan Pace (Slowcarton)
data
eye 3
favorite 0
comment 0
3/26 Uploaded a revised base plate, middle piece & cap This is a reusable respirator cartridge with a 3M style fitting. It was designed by an EMT (I modified it to print easier) to help combat their extreme shortage of masks. They and most other first responders are being forced to reuse their masks and he wanted something more sanitary and obtainable. It snaps together tightly but I would recommend medical tape (or tape) as an extra precaution. They fitting was found on here, when I can...
Topics: cartridge, 3M_Respirator, thingiverse, respirator, mask, Other, stl
3
3.0
Apr 27, 2021
04/21
by
Michel Jasmin (MichelJ)
data
eye 3
favorite 0
comment 0
In the middle of the Coronavirus crisis people are buying toilet paper like crazy and we don't know why. So I made an adaptor to let the people use their TP with a 3M respirator mask. This won't save your life and obviously if you didn't notice THIS IS A JOKE . I printed it in PETG as it is best for snap fit things. I'm planning to create a plug you can place at the other end of the roll. With it in place it will help you die faster. Best advice: WASH YOUR HANDS ! Update 2020-03-16: See my...
Topics: thingiverse, Tools, mask, coronavirus, 3M_Respirator, stl, respirator, Protection
4
4.0
Apr 8, 2021
04/21
by
Kevin L. (KevCoLabs)
data
eye 4
favorite 0
comment 0
Connect HONEYWELL NORTH CARTRIDGE to a 3M BAYONET-STYLE RESPIRATOR. If you want to connect a Honeywell North P100 RWS-54041 Cartridge to the bayonet-style connectors on 3M brand respirators (example: 3M 6800 Full-Face Respirator), then have I got the STL file for you. I was able to find a pair of Honeywell North P100 RWS-54041 Cartridges, but I own a non-compatible 3M respirator. This converter was my solution. Honeywell North Cartridge Thread Specs: M26 x 1.57 I know the 3M Bayonet-Style...
Topics: converter, honeywell_north, Honeywell, Respirator_adapter, respirator_filter, 3M_Respirator, stl,...
3
3.0
Apr 1, 2021
04/21
by
Kenny Tsui (Kty75)
data
eye 3
favorite 0
comment 0
This is custom made mask adapter of 3M 3200 respirator . cut a 5cm diameter circle from a surgical mask for inter filter.
Topics: 3M_Respirator, thingiverse, Parts, 3200, respirator, respiratory_mask, stl
3
3.0
Mar 19, 2021
03/21
by
(AgapeModeling)
data
eye 3
favorite 0
comment 0
AOSafety® R5700 8051 Bayonet to 3M™ Bayonet Adapter ====================================== A prototype design for AOSafety® R5700 8051 bayonet to 3M™ bayonet adapter intended to bring this old half face respirator back to life. AOSafety® was sold to 3M™ in 2007, and no longer produces this half mask respirator and filter cartridges. Was popular during time frame as many hardware stores, and some construction crews may still have them. To bring it back to life, I conceived the following...
Topics: Parts, filter, thingiverse, adapter, 3M_Respirator, bayonet, respirator, stl
4
4.0
Jun 7, 2021
06/21
by
Arya Rashidi (ThaFlash_LA)
data
eye 4
favorite 0
comment 0
The Cover-Inhalation Port, Gen 4 (CIP-Gen4) is a bayonet cap that will shut off one of the two inhalation ports on the 3M 6000 series half face respirators. Given current circumstances affecting the world, PPE, and especially respirators have quickly become high need items that are in limited in supply. While there are better gas masks and tactical respirators, the 3M 6000 series half face respirators are extremely common and many people already own one in their workshop. Made from silicone,...
Topics: 3M_Respirator, respirator, N95, Tools, filter, thingiverse, ppe, stl
3
3.0
Apr 2, 2021
04/21
by
Adam Smith (Asmith152)
data
eye 3
favorite 0
comment 0
I added the filer end so that you can use the 3M filter.
Topics: Automotive, 3M_Respirator, thingiverse, respirator, covid-19, COVID19, stl
3
3.0
Jan 5, 2021
01/21
by
DAVE MAC (DTMCPARTLAN)
data
eye 3
favorite 0
comment 0
directs breath downwards for 3m 6000 series respirators
Topics: Accessories, stl, 3m 6000, respirator, thingiverse, 3M_Respirator, exhalation
5
5.0
Mar 18, 2021
03/21
by
Zack (Horvaticus)
data
eye 5
favorite 0
comment 0
Hey folks, I recently lost my female loop for my 3M respirator and did a remix of another one I found on here because it seemed easier than actually looking for it. Locks up acceptably well and holds on to the elastic better than the original. Will do the male part if I lose that one too :) EDIT: I updated this to include a mating male adapter, and an updated female adapter as well! Worked decently enough in my testing, hope it works for you too! Could also work with standard 1/8" elastane...
Topics: clip, mask, gas, stl, thingiverse, 3M_Respirator, DIY, respirator
3
3.0
Apr 4, 2021
04/21
by
Scott Willis (MrScott_1)
data
eye 3
favorite 0
comment 0
WHO recommendation is to wear a cloth mask to reduce exhalation of droplets and the chance of spreading COVID-19. Half-mask respirators have inlet and outlet valves (see the white and pale blue discs in the inside-the-mask picture) to pass incoming air through the filter and bypass warm, moist exhalation past the filters. Thus, *exhalation is not filtered*. For COVID-19, an exhaust filter should be added to prevent transmitting any (asymptomatic) infection. The initial exhaust filter is a...
Topics: thingiverse, respirator_filter, COVID19, Respirator, stl, Other, 3m_mask, Covid, 3M_Masks,...
4
4.0
Apr 27, 2021
04/21
by
Jeff Leung (badjeff)
data
eye 4
favorite 0
comment 0
DIY filter adapter for 3M 6000, 6500, 6800 & 7500 series respirator. How It Is Assembled: https://youtu.be/KRxjzAnGWvs CAUTION: This design is NOT tested and certified by any professional authorities. TAKE YOUR OWN RISK !
Topics: thingiverse, filter, mask, respirator, 3M_Respirator, stl, surgical_mask, Other
4
4.0
Apr 1, 2021
04/21
by
Steven Doye (Skippy111taz)
data
eye 4
favorite 0
comment 0
Here are some adapters that will fit on the North brand respirators. These are to help DIY'ers with getting creative to make filters and filter systems to attach to the mask. There is 5 in total: 1. North Mask to 3M Filter (will require 1/8 foam gasket) 2. North Mask to 10mm Spigot 3. North Mask to 15mm Spigot 4. North Mask to Cap 5. North Mask to Pop Bottle (will require sealant on the bottle threads or a 25mm OD o-ring) The one I actually needed, we ran out of North style filters at work but...
Topics: thingiverse, adapter, respirator, covid-19, Respirator_adapter, DIY, stl
3
3.0
Apr 2, 2021
04/21
by
M Rod (shalomamigos)
data
eye 3
favorite 0
comment 0
These are replacement HEPA filter cassettes that can be made for 3M 6000 series respirators when OEM equipment is not available.I produced a video about assembly and testing of this cassette here: https://www.youtube.com/watch?v=cyhrL93nQNU&feature=youtu.be The components are: 1. Top and bottom of filter cassette. 2. Cap to cut off one filter inlet and use only one filter cassette at a time. 3. Internal cap that can be used to wedge a piece of surgical mask in the inlets so that there is a...
Topics: respirator_filter, 3M_Respirator, thingiverse, respirator cassette, Tools, PPE, covid-19, COVID19,...
3
3.0
Mar 13, 2021
03/21
by
Michael Stone (bcstonemi)
data
eye 3
favorite 0
comment 0
UPDATED March 21, 2020 -- 9:50 AM (US ET) Editable TinkerCad Files: V.1 (smaller) https://www.tinkercad.com/things/jyADHpZagYY V.1.2 (larger) https://www.tinkercad.com/things/4ZpMQAOoale V1 Thing File is Smashing_Turing-kieran.stl (forgot to change the name from TC) V1.2 Thing File is noted in the list. You will need to print one mask, and two of the "tapa" and "circulo honey" files. Printing on Prusa MK3 with Hatchbox PLA, I had to use a little bit of glue stick and right...
Topics: thingiverse, coronavirus, respirator, 3m respirator, stl, 3mm, n95, 3D Printing
3
3.0
Apr 1, 2021
04/21
by
Jan Pernik (pernik)
data
eye 3
favorite 0
comment 0
For those not having sewing machine and needing simple respirator.
Topics: respirator, stl, Other, thingiverse
3
3.0
Mar 20, 2021
03/21
by
00 ii (00i)
data
eye 3
favorite 0
comment 0
3m respirator front cover
Topics: thingiverse, respirator, DIY, stl
3
3.0
Apr 27, 2021
04/21
by
Shawn Wickam (DoughtCom)
data
eye 3
favorite 0
comment 0
I decided, since the world is ending and all of that, to create custom covers for my p100 filters I had laying around. If you're going to go out into public during the apocalypse you might as well look the part. I just created a breathable cover with the bio-hazard symbol on the outside. Anyway if the world doesn't end [here's the filter I have](https://www.amazon.com/3M-Particulate-Filter-Organic-Filters/dp/B079X5C3QP), I recommend not buying them **unless you need them** during the apocalypse...
Topics: biohazard, P100, thingiverse, biohazard_logo, mask, respirator, 3M_Respirator, stl, Costume
3
3.0
Apr 1, 2021
04/21
by
Jack Lao (jacklaoxd)
data
eye 3
favorite 0
comment 0
Print it with flexible material (TPU/TPE/Ninjaflex) with 0.2mm resolution. Print slowly with bowden type 3D printer (Ender-3, anycubic i3 etc.) Provided stp file for further remix. *Don't use CONCENTRIC pattern on top and bottom layer, it will make tiny holes on valve surface.
Topics: 3D Printing, 3M_Respirator, thingiverse, TPU, respirator, flexible, mask, valve, stl
3
3.0
Apr 1, 2021
04/21
by
Alexander Gee (bostwickenator)
data
eye 3
favorite 0
comment 0
3D printable using PLA and TPU or other flex filament. Customizable scale in the fusion 360 files use the 'scale_factor' parameter to size for different people while retaining the correct connector sizes. The STL files are equivalent to the 3M L size half face respirator. The holes for the straps are sized for standard shoelaces. There is a version of the frontplate with no purge valve to improve protection, this is much easier to get working right. I suggest starting here. The strap holder...
Topics: Replacement Parts, 3M_Respirator, thingiverse, ppe, respirator, mask, half_face, stl
3
3.0
Jan 4, 2021
01/21
by
Eric Kennedy (EricStephenKennedy)
data
eye 3
favorite 0
comment 0
Adapter to use 3M filters with AOSafety Threaded Respirator Built on https://www.thingiverse.com/thing:4245358 40MM NATO (RD40x1/7) to 3M™ Filter Adapter by AgapeIngenium Tight fit. Sanding will be needed at the zipper. In theory, this design will let you choose the orientation of the 3M filter relative to the respirator. In practice, mine was too tight for that adjustment
Topics: Parts, 3m_filter_adapter, stl, AOSafety, 3M_Respirator, Respirator_adapter, thingiverse
3
3.0
Apr 4, 2021
04/21
by
Mike Gallagher (gallaghersart)
data
eye 3
favorite 0
comment 0
This is to protect others while using 3M mask. May work with other version of similar 3M masks. Also has a cover to direct out going air downwards instead of straight forward. Please visit my website for more related material and just more. http://gallaghersart.com/page/airtight_adapters_for_medical_masks_and_face_respirators Includes template to cut filters to size. Two version of the clip-on filter, 2mm gap and 0.5 gap depending on filter type used. The 2mm is for cloth cut from clean fabric...
Topics: thingiverse, respirator_filter, Household, COVID19, respirator, stl, 3M 6300,...
4
4.0
Mar 31, 2021
03/21
by
Alex Goerner (ADT3D)
data
eye 4
favorite 0
comment 0
This allows you to plug one side of a 3M respirator so that you can use only one cartridge, with less airflow. Print it out and then insert a 2mm thick piece of rubber cut to the inside diameter of the cap. This rubber will help the cap seal on the respirator when the cap is rotated into position. The rubber can be taken from a bike tire inner tube. You must do a respirator test afterwards to ensure it airtight. No guarantees that this will keep you safe, although for me it has worked extremely...
Topics: 3M_Respirator, thingiverse, respirators, ppe, respirator, Other, pokemon_figures, safety, stl
3
3.0
Jun 7, 2021
06/21
by
Vector Prime (VectorP)
data
eye 3
favorite 0
comment 0
3M Filter To Unix GazMask Adapter Переходник для подключения фильтра Unix на маску 3M Требуется резиновый уплотнитель и поверка герметичности Модель обновлена до 2 версии 15.04.2020 -- Концепт. Не для реального применения. Автор не несет ответственность за любые прямые или косвенные или...
Topics: 3M_Respirator, COVID19, Other, Unix_Respirator, thingiverse, stl, covid-19, adapter
3
3.0
Jun 7, 2021
06/21
by
Vector Prime (VectorP)
data
eye 3
favorite 0
comment 0
Модель ожидает проверки. Адаптер с MSA фильтра на 3M противогаз. Требуется уплотнение резиновой прокладкой (проверяйте герметичность) -- Концепт. Не для реального применения. Автор не несет ответственность за любые прямые или косвенные или аналогичные убытки или ущерб...
Topics: 3M_Respirator, COVID19, MSA_respirator, Other, thingiverse, stl, covid-19, adapter
3
3.0
Apr 4, 2021
04/21
by
Dylan Kenny (cathbar)
data
eye 3
favorite 0
comment 0
A local hospital was running into issues with the battery clips for their 3M TR-630 PAPR units breaking. It seems like both the button and the casing/clip that keeps it in were shattering, but the clip seemed to be the bigger issue, so I fixed that first. I went through a few iterations and eventually found this one REALLY fits snuggly and has been field tested at the hospital for a few days now with no problems. My print did have a little elephant footing at the bottom, so a quick brush with a...
Topics: thingiverse, PAPR, COVID19, Parts, respirator, stl, covid-19, 3M_Respirator, coronavirus
4
4.0
Jun 7, 2021
06/21
by
FFFTech (FFFTechnology)
data
eye 4
favorite 0
comment 0
Seems like for the last three centuries, every 20th year there's some shitty disease, plague, pestilence... whatever you want to call it; that damn well starts wiping out society. To be frank, this is damn annoying. (and quite sad mind you) So because of Covid-19, people have been buying (and hospitals have been going through) respirators, masks, and filters at a rapid pace. Shortages have become common; and eventually if this virus doesn't have a vaccine for it soon (eat your heart out...
Topics: respirator, Safety, filtration, Filter, thingiverse, Replacement Parts, stl, medical, respirator...
3
3.0
Jun 6, 2021
06/21
by
Dennis Day (ddd_designs)
data
eye 3
favorite 0
comment 0
This is a reusable mask that can be used to help prevent infection for the wearer from those around them and also protect others from the wearer should they become infected.
Topics: 3M_Respirator, respirator, Other, mask, Facemask, thingiverse, stl, covid-19, medical, face
4
4.0
Apr 4, 2021
04/21
by
Rob Harding (charlestondiving)
data
eye 4
favorite 0
comment 0
PAPR Powered Air purifying Respirator. Pushes clean air into a 3m mask or adapted snorkel mask. This utilizes a 12v Fan and 4x roomba 700 Hepa filters. For extended use these are way more comfortable than standard respirators. The PAPR has many advantages. Easier to breath as the air is pushed instead of pulled through the filter for each breath. It purges CO2 preventing headaches and fatigue. Also prevents glasses or shields from fogging. The array of 4 hepa filters aids in high air flow. Very...
Topics: thingiverse, PAPR, COVID19, snorkel, respirator, stl, Other, covid-19, 3M_Respirator
1
1.0
Apr 19, 2022
04/22
by
Alex (DalmataOscuro)
data
eye 1
favorite 0
comment 0
The idea is to use the gas mask for photoshootings, without damaging it. The plug can stay up without even get screwed in and the grid can be customized with any other of your choice: just glue it with instant glue on the 3m plugs. Diameter of the decorative grid must be 3,6 cm. The grid is very thin, please feel free to make it higher. I used Cura and changed the setting of the printed object to resize the object and set it to be 4 mm. high (but same other dimensions).
Topics: thingiverse, DIY, Decoration, stl, respirator, cover, plug, 3M_Respirator, gas_mask
3
3.0
Apr 5, 2021
04/21
by
Peuqui (Peuqui)
data
eye 3
favorite 0
comment 0
This is a redesign based on the model from Filip Kober ( https://grabcad.com/library/decathlon-subea-easybreath-mask-rev-3-1 ) featuring 22 mm ISO connectors for two DAR filters. This lowers the airflow resistance during inspiration significantly, especially while doing physical activity. The separate corks can be plugged into the sidepipes of the Subea Mask to reduce CO2-rebreathing, but it slightly reduces the air intake, too. The second version is for adaptering 3M-filters. Nota bene: This...
Topics: thingiverse, PPE, Protection, respirator, medical, stl, Other, Covid, DAR, 3M_Respirator, mask
3
3.0
Mar 5, 2021
03/21
by
Eric Pu (thesage1014)
data
eye 3
favorite 0
comment 0
This was made in meshmixer from the components of https://www.thingiverse.com/thing:4428488 This will screw onto your Honeywell North respirator and let you attach a 3M filter. It will not seal without a gasket on the bayonet side. You can cut eva foam with a knife or use the provided laser cutting template. See the original model for more info.
Topics: North, stl, Parts, honeywell_north, adapter, 3M_Respirator, Honeywell, respirator, filter,...
4
4.0
Mar 4, 2021
03/21
by
(Revenantautumn)
data
eye 4
favorite 0
comment 0
This adapter will allow you to use 3M cartridge filters with an MSA respirator. The seal feels secure enough to me, but use at your own risk. I recommend printing on its side as I've oriented it, with support material. 100% infil, PETG, ABS, or above. Do not print flat: the plug was to weak to handle the resistance of locking it in to the 3M filter because of the layer line orientation. Delores seems to approve.
Topics: stl, niosh, msa mask, Parts, adapter, 3M_Respirator, respirator, MSA, IMSA, thingiverse
3
3.0
Apr 2, 2021
04/21
by
Nicholas Smith (midnightsmith)
data
eye 3
favorite 0
comment 0
This is to adapt the Sperian Survivair cartridges to a 3M bayonet style mask. the mask I gave is the 6000 series msk, however, it should fit most as long as it has the male bayonet fittings. I combined to other Things to make this since user RoJSimpson modeled the threads and user VinnytheKnight made the bayonet portion. Hopefully this helps if you had a bunch of Sperian filters but no mask! The overhangs are rough because I used no supports, near impossible to get them out. Use 100% fan and it...
Topics: cartridge, 3M_Respirator, thingiverse, adapter, sperian, Parts, respirator, survivair, stl
3
3.0
Jan 4, 2021
01/21
by
DAVE MAC (DTMCPARTLAN)
data
eye 3
favorite 0
comment 0
3m 6000 series bayonet Cap i'm unsure but it may be too wide to fit the 7000 series ( 2 in. diam.)
Topics: Parts, stl, 3m 6000, respirator, 3M_Respirator, thingiverse, 3M_bayonet
2
2.0
Apr 24, 2021
04/21
by
Derek OBrien (The_Nonchalant_Shallot)
data
eye 2
favorite 0
comment 0
This respirator filter uses activated charcoal to filter out gasses and biological contaminants. It comes with a 3M connector designed right into it.
Topics: DIY, 3M_Respirator, Survival, filter, stl, covid-19, thingiverse, respirator
3
3.0
Apr 1, 2021
04/21
by
(Abacus)
data
eye 3
favorite 0
comment 0
An adapter which makes 3M Bayonet-style respirator masks compatible with 3M threaded-style respirator cartridges. Screw the cartridge on until it makes hard contact with the shoulder of the adapter. Optionally, place a 24x2.5mm or comparable o-ring at the base of the threads to enhance the seal and maintain re-usability for those cartridges which have that ability. I've included the .SLDPRT in case you have access to threaded respirators of a different size. This is NOT a certified safety...
Topics: 3M_Respirator, thingiverse, adapter, Parts, respirator, covid-19, COVID19, stl, threaded, bayonet
