2
2.0
-
-
-
by
Matt McConnell (Sculptor_M)
data
eye 2
favorite 0
comment 0
Caddx Peanut FPV Camera mount For Diatone Roma F5 V1 and V2 set at 25° camera angle STL and Rhino 3DM files. This is a modified version of the original peanut case with vibration arms to reduce jello in FPV flight footage. With secondary surface support file for dual extruder printers with PVA support material. Importing the support file and adding auto supports provides a layer that can be removed for smoother final surfaces.
Topics: diatone, CADDX, thingiverse, caddx_peanut, diatone_roma_f5, fpv, R/C Vehicles, stl, fpv_camera_mount
5
5.0
-
-
-
by
Jerry Massie (FrankPVernon)
data
eye 5
favorite 0
comment 0
Replacement arm for your Diatone Roma f5 V2. Or at least until your OEM part is shipped from where ever and whenever.
Topics: 3D Printing, thingiverse, diatone, diatone roma f5 v2, stl, diatone roma v2 arm, diatone roma
3
3.0
-
-
-
by
Sergey Pushkin (pushken_vbane)
data
eye 3
favorite 0
comment 0
Just a Caddx Peanut mount for Diatone Roma F5 (DJI FPV version) for the stock camera case. Needs a longer screw though.
Topics: diatone_roma_f5, stl, thingiverse, caddx_peanut, R/C Vehicles
3
3.0
-
-
-
by
Achim Ziermann (GuiliFPV)
data
eye 3
favorite 0
comment 0
Hi, this my qTee Antenne for the Diatone Roma F5, may fit to similiar frames also. This keeps the antenna protected inside and vertical which provides better RF signal distribution compared to vertical mounting. This is printed in TPU with 90% infill. The Antenna near the frame on that image, is from behind. Fit the antenna tips first into the antenna mount and then put the white body in. Have fun and checkout my other Designs. Cheers. GuiliFpv
Topics: ghost, ImmersionRC, R/C Vehicles, diatone, stl, antenna_mount, ghost_qtee, qtee, thingiverse,...
3
3.0
-
-
-
by
Windi Jolbars (jolbars)
data
eye 3
favorite 0
comment 0
Diatone Roma F5 V2 (DJI power kit version with GPS, could be compatible with other versions as well) holder for Caddx/Runcam Vista antenna (single antenna). Main version sets antenna at 20 degrees from the vertical (i.e.with camera angle at 20 degrees antenna would be vertical). Alternate versions - for 15 degree camera and 30 degree camera.
Topics: diatone_roma_f5, stl, diatone_roma_f5_v2, thingiverse, caddx_vista, R/C Vehicles
4
4.0
-
-
-
by
Nicolas Udy (udyux)
data
eye 4
favorite 0
comment 0
## Diatone Roma ApexOSD standoff mount ApexOSD mount for the Diatone Roma. The OSD will sit right in front of the first set of standoffs, in front of the stack. Designed to work with the frame's side protection plastics. 30.5mm standoff spacing from hole center. Fits 6mm OD standoffs.
Topics: diatone, thingiverse, apex_osd, Roma_F5, roma, ApexOSD, R/C Vehicles, fpv, stl
4
4.0
-
-
-
by
Ludovic JACQUIER (peewiz)
data
eye 4
favorite 0
comment 0
Caddx Orca mount for Diatone Roma F5 Remix of the superb design made by floxflux https://www.thingiverse.com/thing:4590251 @floxflux : Many thanks to you !
Topics: Caddx_orca, diatone, thingiverse, Roma_F5, R/C Vehicles, stl
4
4.0
-
-
-
by
Ludovic JACQUIER (peewiz)
data
eye 4
favorite 0
comment 0
Caddx Orca mount for Diatone Roma F5 This version can be directly fixed on the quad without using the supplied Go-Pro holder. This version is stronger, lighter and permit a better fixation of the battery but is not orientable Different versions are supplied, with different angles to fit your need. Version that uses the supplied Go-Pro holder and wchich is orientable is available here: https://www.thingiverse.com/thing:4728328 Both versions are remix of the superb design made by floxflux...
Topics: Caddx_orca, diatone, thingiverse, Roma_F5, R/C Vehicles, stl
4
4.0
-
-
-
by
Nicolas Udy (udyux)
data
eye 4
favorite 0
comment 0
##Diatone Roma GoPro Style mount - lite ver. Remixed from a near identical design but with a thinner and shorter base, camera position closer to the front and minor fixes to the screw holes.
Topics: GoPro, diatone, thingiverse, GoPro_Mount, roma, roma_F5, R/C Vehicles, fpv, stl
3
3.0
-
-
-
by
Victor Ourdouillie (victor_ourd)
data
eye 3
favorite 0
comment 0
Just au support for the 2.4ghz antenna.
Topics: ELRS, thingiverse, Other, stl, diatone roma, 2.4ghz, diatone roma F5, roma F5
4
4.0
-
-
-
by
casey murray (kslayfpv)
data
eye 4
favorite 0
comment 0
i added full dji anteena moutns to this exsisnig design im amatur i made it in tinker cad
Topics: diatone, diatone roma F5, dji, stl, fpv, Roma, Other, thingiverse, drone
4
4.0
-
-
-
by
Nicolas Udy (udyux)
data
eye 4
favorite 0
comment 0
# Diatone Roma SMA Mount ImpulseRC Apex style SMA mount for the Diatone Roma F5. Intended to go on the stock standoffs just behind the stack. Cutouts around the standoffs allow use with the Roma's side protection plastics. 30.5mm standoff spacing from hole center. Fits 6mm OD standoffs.
Topics: FPV_SMA_Mount, diatone, thingiverse, sma, sma_mount, Roma_F5, roma, R/C Vehicles, fpv, stl,...
3
3.0
-
-
-
by
daniel kor (danielksor)
data
eye 3
favorite 0
comment 0
Diatone Roma F5 v2 Xiaomi Yi mount
Topics: diatone, thingiverse, drone, R/C Vehicles, mount, xiaomi yi, xiaomi, roma f5, stl, diatone roma
2
2.0
-
-
-
by
Victor Ourdouillie (victor_ourd)
data
eye 2
favorite 0
comment 0
Just a remix of Diatone Roma Arm protechtion to integrate motor protection.
Topics: diatone, thingiverse, diatone roma f5, roma, roma f5, Other, stl, diatone roma
1
1.0
-
-
-
by
Carlos Abraham Moreno (Charly_fpv)
data
eye 1
favorite 0
comment 0
Este es un remix del diseño de dimka_fpv , solamente aumente el grosor de la pared exterior y añadí una pared interior para darle mas soporte a la pieza . imprimí en TPU con 60% de relleno para darle mayor flexibilidad.
Topics: stl, thingiverse, roma f5, diatone roma, R/C Vehicles
3
3.0
-
-
-
by
Jacob Baron (barontechnologies)
data
eye 3
favorite 0
comment 0
Special request for @Dan1942 Roma F5 GoPro Hero 9 Mount. Print in TPU @30-50% infill depending on how stiff you want it. Includes 15, 20, 25, and 30 degree mounts so you can match the angle of your FPV camera for best framing. Please leave a comment with any suggestions or comments.
Topics: hero9, fpv_camera_mount, R/C Vehicles, GoPro_Mount, thingiverse, GoPro_hero_9, stl, diatone, fpv,...
4
4.0
-
-
-
by
Róbert Mihálik (96robert9)
data
eye 4
favorite 0
comment 0
Diatone Roma F5 Gopro Session 4,5 mount with Etnix and TBS ND filters Hello, i remixed this mount specialy for diatone roma F5 because i cant find any specific mount that would be robust enought to witstand FPV beating :D Hope that you will like it :) Remixed from: http://www.thingiverse.com/thing:2594062 https://www.thingiverse.com/thing:4633309
Topics: gopro_session_5, ditaone, gopro_session_mount, fpv_camera, GoPro, stl, fpv, FPV_freestyle,...
3
3.0
-
-
-
by
STRIKING FPV (strikingfpv)
data
eye 3
favorite 0
comment 0
The Diatone Roma F5 DJI V2 frame kit comes with an included GPS and Immortal Antenna holder which is very nice quality and does a great job, provided you have the correct GPS (I think a BN220 fits it, can't remember exactly), but if for any reason you decide to use a Mateksys M8Q-5883 GPS, it's a very tight and bad fit. Since I like the original design, I basically copied it as much as a could, making it slightly longer with less angle on the GPS. It also has two notches around the GPS to view...
Topics: thingiverse, Diatone, R/C Vehicles, Drone, stl, Quad, Roma F5, Immortal Antenna, Mateksys, FPV,...
4
4.0
-
-
-
by
Jon McKenna (JMcKenna2)
data
eye 4
favorite 0
comment 0
Remix of the low profile version of F5 Cover plate by ShadowVFX to integrate a FrSky R-XSR receiver. Holes for antenna line up with the TPU antenna tube mount on my BNF/PNP Roma F5 ShadowVFX's cover plate (Used the Low-Profile) -- https://www.thingiverse.com/thing:4685677 Original R-XSR enclosure used in the remix -- https://www.thingiverse.com/thing:3352153
Topics: stl, diatone_roma_f5, R/C Vehicles, Frsky_XSR, thingiverse, Drone
3
3.0
-
-
-
by
Achim Ziermann (GuiliFPV)
data
eye 3
favorite 0
comment 0
Hi, this my qTee Antenne for the Diatone Roma F5, may fit to similiar frames also. This keeps the antenna protected inside and vertical which provides better RF signal distribution compared to vertical mounting. This is printed in TPU with 90% infill. The Antenna near the frame on that image, is from behind. Fit the antenna tips first into the antenna mount and then put the white body in. Have fun and checkout my other Designs. Cheers. GuiliFpv
Topics: Roma_F5, ImmersionRC, ghost, ghost_qtee, IRC, thingiverse, aircraft, antenna_mount, qtee, diatone,...
2
2.0
-
-
-
by
Guillaume Meilgen (GuigsTimelapse)
data
eye 2
favorite 0
comment 0
SMA DOUBLE DJI AIR UNIT DIATONE ROMA F5 F7
Topics: diatone_roma_f5, dji_air_unit, thingiverse, SMA_DJI, diatone, 3D Printing, SMA, diatone_roma_f7,...
