8
8.0
Jan 19, 2021
01/21
by
Joey Strandnes (joey_strandnes)
data
eye 8
favorite 0
comment 0
This is a 2.35mm Cassette Spacer for 10 speed cassettes. ***NOTE*** Print this on a machine with high tolerance to get the best performance from your cassette! Printed it in PLA and it is holding up like a champ, no deformation so far but would recommend printing this in PET since it’s stronger!
Topics: thingiverse, Sport & Outdoors, spacer, bike, diy, SHIMANO, cassette, bicycle, stl, Mountain_Bike
4
4.0
May 1, 2021
05/21
by
Krzysztof Kołakowski (turntablized)
data
eye 4
favorite 0
comment 0
Remixed version of bike chain cleaner based of fozzybear project. Changes made: - much smaller with a 9cm long handle - a lot faster to print - brush pads are closer for those narrow 12 speed chains. - works as a charm.
Topics: stl, bike, Sport & Outdoors, SRAM, SHIMANO, mtb, thingiverse
3
3.0
Apr 27, 2021
04/21
by
Ariel Lezen (GuessingStick)
data
eye 3
favorite 0
comment 0
This tool is for shimano ultegra style external bottom brackets. Use an adjustable wrench or a 30mm wrench/socket.
Topics: thingiverse, tool, shimano, stl, external_bb, Sport & Outdoors
3
3.0
May 1, 2021
05/21
by
(mowcius)
data
eye 3
favorite 0
comment 0
This is an adjustable shim designed to adapt mounts designed for 31.8mm bars to 22.2mm bars. Specifically this part was designed to facilitate the use of a Shimano GRX BL812 inline brake lever on a smaller 22.2mm bar. This lever also rests on the bar, which is why the shim is so long. You may wish to shorten it depending on your use. The longer shim section also facilitates using a hose clamp to make sure it's nice and tight where the resting part is. The adjustable nature of this part allows...
Topics: stl, Brake_Lever_Mount, Shimano_GRX_BL-RX812, Sport & Outdoors, shim, thingiverse
6
6.0
Mar 18, 2021
03/21
by
Rick VanWort (rvanwort)
data
eye 6
favorite 0
comment 0
I wanted to convert my 2x Shimano XT Mountain Bike to 1x by removing front derailer. I plan to put a narrow wide chain ring on to keep from dropping chain but I am on fence on going to 32 or 34 tooth so I thought I would start with the stock 32 tooth and this guide to keep the chain on.
Topics: chain, Sport & Outdoors, Mountain_Bike, stl, SHIMANO, thingiverse
5
5.0
Jan 4, 2021
01/21
by
Alex Neiman (3Dimpulse)
data
eye 5
favorite 0
comment 0
This is for the 4 piston shimano disc brake calibers when the wheel is removed. If also works on some of the 4 piston Sram brake calibers too.
Topics: brake spacer, stl, bike brake, disc brake, SHIMANO, disc, Sport & Outdoors, SRAM, thingiverse
3
3.0
Jan 3, 2021
01/21
by
Johannes Becker (johbecker)
data
eye 3
favorite 0
comment 0
This is an adapter to attach a Shimano shifter with ISPEC-EV interface to a Formula brake. For the brake the Formula Mixmaster is needed, because there the adapter attaches. Please be aware, that you will need a **left** side Mixmaster for the shifter on the right, due the way the two components are oriented to each other. The shifter is attached to the adapter with a M4 screw. To make it stable, the adapter has a pocket for a M4 square nut. The clamp that holds the adapter to the stud of the...
Topics: stl, ISPEC-EV, Shimano, Sport & Outdoors, thingiverse, formula
4
4.0
Mar 31, 2021
03/21
by
Revolio Clockberg (RevolioClockberg)
data
eye 4
favorite 0
comment 0
This is an adapter that can pair Shimano 11 speed road shifter with Shimano 11 speed MTB rear derailleur. It is only tested with this setup: Rear derailleur is Shimano SLX RD-M7000 GS Cassette is XT 11-speed CS-M8000 11-40T Road shifters are Shimano ST-RS685 What you are going to need: Two bearings 623 2RS One 20mm m3 bolt. Two 6mm m3 bolts. Two cable adjustment screws. M3 washers and nuts. You would require a pretty long shift cable. Some m5 hand tap to cut threads for adjustment screws. You...
Topics: bike, Sport & Outdoors, thingiverse, mtb, SHIMANO, stl, bicycle, monstercross
3
3.0
Oct 14, 2021
10/21
by
Horror Vacui (horrovac)
data
eye 3
favorite 0
comment 0
Adapter to fit MTB bleeding kit funnels (M5) to road lever bleeding port (M7). Install a 1.5mm thick O-ring (or any other size that will seal and allow the threads to engage) on the M7 thread. Check for leaks. If you happen to break the adapter off, you should be able to extract the remaining bit using a 3mm hex key. Don't overtighten!
Topics: thingiverse, stl, bleed_adapter, SHIMANO, Sport & Outdoors, Brakes, Hydraulic_Brakes,...
3
3.0
Apr 17, 2021
04/21
by
Jons (Joens)
data
eye 3
favorite 0
comment 0
A small tool to get the pin out to access the bearing in the spool. Use a M3 nut and bolt, I prefer a allen key bolt. Tested on most brands and reels.
Topics: baitcasting_reel, shimano, reel, thingiverse, fishing_reel, stl, daiwa, Sport & Outdoors,...
2
2.0
Mar 10, 2021
03/21
by
Norihiro Ohta (Digipan)
data
eye 2
favorite 0
comment 0
Will match to PCD96mm clank.
Topics: stl, thingiverse, Mountain_Bike, mountainbike, bycicle, Shimano_Hollowtech, Sport & Outdoors
6
6.0
Mar 3, 2021
03/21
by
Fabien Postif (ScotchE67)
data
eye 6
favorite 0
comment 0
Idéal pour convertir votre pédalier 3x en 2x. Se monte en remplacement du plus grand plateau. Taille extérieure adaptée à un plateau de 36 dents.
Topics: SHIMANO, Bash_Guard, VTT, Sport & Outdoors, thingiverse, stl, Mountain_Bike
4
4.0
Jun 11, 2021
06/21
by
Anton Fa (fomenkoa)
data
eye 4
favorite 0
comment 0
Shift levers for standard Shimano (or compatible) friction shifters ie: downtube shifters. Printed and tested on a vintage roadie with good results. Accepts standard gear cables. Note the asymmetry (left vs right shifters) Great for replacing broken/cracked/snapped/lost levers. Assembly hardware required.
Topics: shifter, Sport & Outdoors, thingiverse, downtube, SHIMANO, road_bike, stl
5
5.0
May 1, 2021
05/21
by
Jackson (Life_The_Universe_And_Everything)
data
eye 5
favorite 0
comment 0
This is a pad spacer for hydraulic bicycle brakes. It's used for when the disk/rotor is removed and you don't want the caliper to accidentally compress. This saves you from having to reset the caliper, as well as protecting your bike while traveling. I recommend a decent fill density of 15% or more and a support structure for the best print quality. Hope you enjoy :)
Topics: stl, Bike_MTB, tools, Sport & Outdoors, Brake, SRAM, SHIMANO, mtb, Mountain_Bike,...
3
3.0
Apr 23, 2021
04/21
by
Sergey Komarov (agurjagur)
data
eye 3
favorite 0
comment 0
Hello to all. This thing is very easy to print and to use thing. Designed for 27.5 inches wheel but it seems to me that it is possible to use with different sizes For what is it needed? To protect your MTB front shifter from mud if you never use full-cover fender. How to mount it? I would advise you to use plastic clamps.
Topics: SHIMANO, Sport & Outdoors, mtb, Fender, bike, bicycle_fender, stl, 27.5, thingiverse, bicycle,...
10
10.0
Apr 30, 2021
04/21
by
Julien Morand (julienpmorand)
data
eye 10
favorite 0
comment 0
This hanger lets you store your wheels in your wardrobe. Tested with low profile wheels as well as 60mm wheels (zipp 404). Not sure if it's compatible with Zipp 808 style wheels.
Topics: stl, vision, zipp, campagnolo, bicycle, Sport & Outdoors, shimano, bontrager, mount, sram,...
3
3.0
Apr 24, 2021
04/21
by
Norihiro Ohta (Digipan)
data
eye 3
favorite 0
comment 0
Bleeding cap for shimano disk brake. Please use TPU material.
Topics: Mountain_Bike, Shimano_Disc, Sport & Outdoors, stl, thingiverse, bicycle
4
4.0
Jan 16, 2021
01/21
by
Tomáš Jozífek (Tojik)
data
eye 4
favorite 0
comment 0
Hi, my brake fluid reservoir covers disintegrated, so I spent a day making a 3d printed ones. The M355 lid already on Thingyverse leaked as its made for injection molding, not 3d printing. These should not leak, but I haven't tested them extensively (yet). Maybe they do just a little bit. I'd love to hear from you and improve them with your feedback. The cad files are a mess as these are a traced photo + the stl file from here https://www.thingiverse.com/thing:3484736 for the seal and screw...
Topics: seal, Shimano_hydraulic, Shimano_Disc, thingiverse, reservoir, Sport & Outdoors, Brake, cover,...
3
3.0
Jan 16, 2021
01/21
by
Tomáš Jozífek (Tojik)
data
eye 3
favorite 0
comment 0
Hi, my brake fluid reservoir covers disintegrated, so I spent a day making a 3d printed ones. They should not leak, but I haven't tested them extensively (yet). Maybe they do just a little bit. I'd love to hear from you and improve them with your feedback. The cad files are a mess as these are a traced photo + the stl file from here https://www.thingiverse.com/thing:3484736 for the seal and screw holes and completely freehand for the rest, so I'm not sharing them here. You can still dig them up...
Topics: seal, Shimano_hydraulic, M436, thingiverse, reservoir, Shimano_Disc, Sport & Outdoors, Brake,...
2
2.0
Jan 19, 2022
01/22
by
Noah Kohl (JustTry)
data
eye 2
favorite 0
comment 0
Einfacher Behälter um Bremsbeläge bis 34mm Länge sauber und übersichtlich beim Schrauben zu lagern. - sauber Aufbewahrung - Wiedererkennung welcher Bremsbelag an welche stelle gehört - Behälter verschließbar
Topics: SRAM, thingiverse, box, mtb, Storage_Box, SHIMANO, tool, stl, werkzeug, tools, Sport & Outdoors
4
4.0
Mar 21, 2021
03/21
by
Ricardo AkA Voodoo (voodoopt)
data
eye 4
favorite 0
comment 0
Aperto de cabo de travão hidráulico Para quem adapta bicicleta de travões de discos mecânicos, para os travões hidraulicos Esta peça foi redesenhada para ser mais forte Pode custar um pouco a colocar, mas a intenção é que seja firme e robusta. Espero que gostem e partilhem as vossas duvidas Se imprimir este objeto, por favor partilhe a sua impressão 3D http://www.thingiverse.com/thing:965868/add_instance ----- English version ( translate google )--- Tightening brake Hydraulic cable...
Topics: stl, sra, bicycle, SRAM, grip, cable_guide, cable_clip, jawire_cable_grip, bike, break, SHIMANO,...
3
3.0
Apr 4, 2021
04/21
by
Charles McCollum (CMac122)
data
eye 3
favorite 0
comment 0
Replacement plastic piece from 1988 Cannondale Bicycle using Suntour A-3000 Accushift downtube shift levers. This is the piece on the shift boss that locks the shift lever stop in place. Other years and models may use this same piece. Resin printer recommended. Depending on printer quality, sanding/drilling of holes/edges may be required. Diameter - 21.5 mm Square piece - 12mm Circle depth - 1 mm Square depth - 1.9 mm Overall depth - 2.9 mm Hex Size - 9.5mm or 3/8 inch Small Holes V1 - 1.7 mm...
Topics: thingiverse, shifter, cycling, Sport & Outdoors, cannondale, stl, part, bicycle, SHIMANO
2
2.0
Jan 18, 2022
01/22
by
Alexey Zakharenkov (Lexapskov)
data
eye 2
favorite 0
comment 0
Переходник позволяющий установить датчик тормозной ручки от электромоторкомплекта на комборучки Shimano ST-EF50. на другую ручку распечатать зеркально. поддержки= обязательно, пластик - любой. потребуется винт м3х5+/-1мм, переходник накидывается на кромку, отверстие сверлится по...
Topics: thingiverse, ebike, SHIMANO, stl, Brake, Sport & Outdoors
3
3.0
Jun 11, 2021
06/21
by
Ritchie Budd (Ritch-t-biscuit)
data
eye 3
favorite 0
comment 0
basic stand for Shimano/SRAM cassette.
Topics: bike, Sport & Outdoors, thingiverse, SRAM, hub, SHIMANO, cassette, stl
4
4.0
Mar 25, 2021
03/21
by
Shane Fletcher (SleepingGiant)
data
eye 4
favorite 0
comment 0
Chain Guard Bicycle Capriolo Diavolo (16.2cm sprocket) Curvilicious design for my son's bike. Wanted it to look "cool" for him. I love creating curvy custom designs. I am available for hire - contact me via my website for affordable high quality custom design commission work. sleepinggiantvisual.com The design is very forgiving allowing for a large area to attach the screws on the back. Get the Fusion360 file here so you can modify as you need: https://a360.co/2Wd5fzf You can download...
Topics: stl, bicycle, thingiverse, Sport & Outdoors, Diavolo, sprocket, bike, chain, kids bike, bike...
2
2.0
Jan 18, 2022
01/22
by
(TreibAir)
data
eye 2
favorite 0
comment 0
The chain guard is designed for a FC-M540 crank on which I removed the smallest and the largest chainring for a 1x conversion. I wanted to keep the chainguard because it is my "everyday-to-the-shops-without-changing-to-cycling-kit"-bike. The included lettering is a reference to a remark in a GCN video. Ride on!
Topics: chainguard, bicycle, thingiverse, bike, crank, SHIMANO, stl, Sport & Outdoors
10
10.0
Apr 28, 2021
04/21
by
Simon C (sim_mtb)
data
eye 10
favorite 0
comment 0
Useful tool for bike mechanics. Designed for 11 speeds chain.
Topics: thingiverse, bike, chain, cassette, SRAM, derailleur, SHIMANO, stl, holder, mtb, Sport &...
5
5.0
Apr 16, 2021
04/21
by
Heinz Spiess (enif)
data
eye 5
favorite 0
comment 0
When I had to replace the old and used crank set of my daughter's bicycle with a new Shimano FC-M591 44/32/22, I realized too late that the big chain ring it came with did not have mounting holes for the chainguard. So I tried to find a commercial chainguard which I could somehow fit via the 4 mounting screws of the chain ring - but could not find anything reasonable. Thus, I finally ended up designing and printing such a chainguards myself... The chainguard consists of a thinner outer ring, a...
Topics: mountain_bike, parameterized, MTB, thingiverse, guard, openscad, chain_guard, mountainbike, ring,...
4
4.0
Aug 8, 2021
08/21
by
one two (PETGore)
data
eye 4
favorite 0
comment 0
Chainring guard that fits on an early 90s Shimano triple crank. The BCD of the 5 screws is 156mm. What is this for? - It keeps your right trouser leg from getting caught in the big chainring while pedaling. Print in PETG for best durability. Fusion 360 source included
Topics: bike, bicycle, thingiverse, Sport & Outdoors, SHIMANO, Chainring_Guard, stl, chainring
3
3.0
Mar 9, 2021
03/21
by
Norihiro Ohta (Digipan)
data
eye 3
favorite 0
comment 0
Clanc cover for Shimano XT and SLX. Please use TPU.
Topics: stl, thingiverse, bicycle, SHIMANO, Sport & Outdoors
4
4.0
Jun 21, 2021
06/21
by
Murray Clark (muzz64)
data
eye 4
favorite 0
comment 0
Cyclists all over the world use their choice of special pedals and mating cleats that are attached to their shoes because they provide better energy transfer. The cleats, attached to the bottom of their cycling shoes, lock into the special pedals. However, this means you really need to wear your cycling shoes with the cleats fitted whenever you ride your bike (You can still ride the bike without the shoes with cleats but the special pedal is very small, no comfortable and far from ideal for...
Topics: clip in, cleat, shoes, thingiverse, cycle, riding, pedals, designer, cleat shoe, muzz64, bike,...
3
3.0
Jun 11, 2021
06/21
by
Tom Janssens (mr_robot92)
data
eye 3
favorite 0
comment 0
Work in progress...
Topics: clipless_pedals, pedals, Sport & Outdoors, thingiverse, SHIMANO, stl
10
10.0
Mar 21, 2021
03/21
by
Egil Kvaleberg (egil)
data
eye 10
favorite 0
comment 0
This is a spare part, a cover for a Shimano Nexus SL-7S10 7-speed twist shifter. This cover is not available as a spare part, you will have to replace the entire shifter it it breaks or is lost. This is a rather crude job, the fit is not perfect, and makes no attempt whatsoever to replicate the original cover. Still, hopefully it should be able to keep some dirt out of the mechanism. You will also need an M2.5 screw for fixing. Print upside down. No need for support or any trickery.
Topics: stl, Nexus, bicycle, shifter, SHIMANO, spare_part, Sport & Outdoors, thingiverse
4
4.0
Mar 21, 2021
03/21
by
Ricardo AkA Voodoo (voodoopt)
data
eye 4
favorite 0
comment 0
Evitar males maiores como riscos e mossas Já algum tempo que estava para fazer esta peça, agora partilho com vocês. também deve ser possível imprimir em fila-flex ou ninja-flex É possível fazer para outros modelos. Quem quiser que entre em contacto comigo Se imprimir este objeto, por favor partilhe a sua impressão 3D http://www.thingiverse.com/thing:985321/add_instance English version (Google translate) Avoid greater evils as scratches and dents Some time now was to make this piece, now...
Topics: protector, stl, crank, deore, Protection, SRAM, deoreXT, SHIMANO, Sport & Outdoors, voodoopt,...
3
3.0
Jan 5, 2021
01/21
by
Chris Babbitt (das_babbs)
data
eye 3
favorite 0
comment 0
I printed this to try and keep the muck out of my cheap IXF crankset from amazon. I printed it with the Sram Eagle logo as I am running the Sram GX 1x12...btw cheap oval chain ring was totally worth it.
Topics: prusa_slicer, Sport & Outdoors, Ender_3_Pro, ixf, crankset, crankset_dust_caps, crank, SHIMANO,...
6
6.0
Jan 19, 2021
01/21
by
Rainer Unsinn (rainerunsinn)
data
eye 6
favorite 0
comment 0
I couldn't print the Disc Brake Pad Spacer by aiber properly, so I took my caliper and measured my original Shimano disc brake spacer. It's measures where somewhat different (though not the thickness and the distance to the grabbing pincer at top) - and I included a litte print helper pad at the tiny top. ## Just to make sure everybody get it right This pad spacer is **not to used during bicycle rides**. It's used to keep the brake pads apart if the disc is unmounted. Use it if you transport...
Topics: thingiverse, Sport & Outdoors, disc_brake, bicycle_disc_brakes, SHIMANO, stl, Mountain_Bike
2
2.0
Mar 22, 2021
03/21
by
Callum Porritt (callumtp)
data
eye 2
favorite 0
comment 0
Convert a DT shifter bike to STI shifters. You'll need to print two of these and make sure to mirror one in your slicer of choice. Shouldn't need any drilling. Just sand to your desired look and screw on.
Topics: stl, shimano, bike, Sport & Outdoors, thingiverse
4
4.0
May 1, 2021
05/21
by
Tarmo Kübard (tarmik)
data
eye 4
favorite 0
comment 0
A cover for your downtube shifter bosses when you are not using them. The shape matches with the shifter cable stoppers from Shimano and Dia-Compe. Use a M5x10mm bolt.
Topics: stl, downtube, Sport & Outdoors, cover, shifter, dia-compe, SHIMANO, boss, thingiverse
10
10.0
Apr 27, 2021
04/21
by
Charles W (foo_fighter)
data
eye 10
favorite 0
comment 0
3/8" Inch drive. Fits Shimano Hollowtech II, GXP, Campy Ultratorque etc and the newer smaller 6800/9000 series external cups. Second one fits BSA30 ( Rotor, RaceFace )and MegaEVO external cups.
Topics: thingiverse, Shimano_Hollowtech, MegaEvo, ultra torque, Bottom_Bracket, FSA, stl, campy, bsa30,...
9
9.0
Jun 20, 2021
06/21
by
Lothar Koehler (lothar6472)
data
eye 9
favorite 0
comment 0
I made a simple design in sketchup to create a 16,5mm front derailleur spacer for my Fatsix, to attach a chainguide. Use M6 screw. Download the STL File for slicing with your settings and preferences. Have fun ;)
Topics: Sport & Outdoors, SHIMANO, haibike, yamaha_ebike, thingiverse, stl, spacer
3
3.0
Mar 18, 2021
03/21
by
Gilian Mischker (Nailig)
data
eye 3
favorite 0
comment 0
The standard holder of the Garmin speed sensor 2 only fits a regular axis. If you have a Shimano Alphine 11 gear hub, this thing will hold your sensor. I printed this (including support) with 98a flex filament. It is a very thight fit. Perhaps scaling it slightly larger (101% for example) will work better. Remove the sensor from the original holder and fit the sensor in this thing.
Topics: sensor, shimano, thingiverse, garmin, alphine, Sport & Outdoors, speed, stl
3
3.0
Jun 10, 2021
06/21
by
Jakub Jirkuv (Kubakubula)
data
eye 3
favorite 0
comment 0
Remix of Bicycle Gear Indicator. Cover added. Perfectly works with my 11sp Shimano XT shifter. Index fits tightly - there is no need to glue it. I advice to print cover with concentric pattern due to higher transparency.
Topics: indication, mtb, shifter, Sport & Outdoors, thingiverse, bycicle, Gear, SHIMANO, stl
6
6.0
Jan 21, 2021
01/21
by
janne kekkonen (opelman77)
data
eye 6
favorite 0
comment 0
Made this for my bicycle project, just to try how does it work. separate part´s before printing, it´s more easy to print them that way. This goes for Shimano nexus 3 shifter. I printed them with 50% filling but maybe 75% would be better. or even 100% use normal bolt to fasten the part on, if you have tool´s to make thread´s, even better
Topics: shifter, shimano, thingiverse, Sport & Outdoors, bicycle, stl
2
2.0
Sep 13, 2021
09/21
by
char on (char0n)
data
eye 2
favorite 0
comment 0
Support is needed for the plug-holder, for my printer settings it was very easy to remove and the plug fits like a glove. Wall thickness is more important than infill. The holes for the screws are 3,4mm in diameter. I had some 3mm countersunk wood screws which fit very well. Designed with OnShape https://cad.onshape.com/documents/27bf0cf4e9c86d4abf45f5ca/w/de6ee79f73d1d33ba4910bf9/e/627bd84e37dfb56f37eda52b
Topics: stl, batter charger, thingiverse, shimano, e6002, Sport & Outdoors, holder
3
3.0
Jan 8, 2021
01/21
by
Bersier Théophile (hotgun007)
data
eye 3
favorite 0
comment 0
I created a charger holder to hold it on a workshop stand. so that the stand doesn't drag on the floor and can't fall down.
Topics: Sport & Outdoors, SHIMANO, stl, thingiverse
3
3.0
Apr 1, 2021
04/21
by
Adam Swidzinski (adamswid)
data
eye 3
favorite 0
comment 0
Plastic screw helpful in left arm install. Lost mine and decided to print one. Tool used for installation is different but included. Printed mine from ABS. 0.1 layer
Topics: Sport & Outdoors, thingiverse, Shimano_Hollowtech, hollowtech_ii, stl
11
11
Jan 12, 2021
01/21
by
Fail Galeev (kazansat)
data
eye 11
favorite 0
comment 0
SHIMANO Hollowtech II Bottom Bracket dust cover 24mm., 7mm. height bearings compatible (6805 2RS or 61805 2RS)
Topics: SHIMANO, thingiverse, Sport & Outdoors, stl, Bottom_Bracket, Hollowtech, mtb
3
3.0
Oct 15, 2021
10/21
by
t n (tnl)
data
eye 3
favorite 0
comment 0
Homemade Cleat Wedge for Look. 1 degree cleat wedge. Compatible with look and shimano 3 hole systems.
Topics: cleat, thingiverse, look, stl, look_keo, shimano_cleats, spacer, Sport & Outdoors, wedge, Keo
11
11
Jan 18, 2021
01/21
by
Chris Heerschap (cmh)
data
eye 11
favorite 0
comment 0
**Update 12 Nov 2018:** I printed this out on my Prusa Mk3, and discovered my sizes were all wrong for that printer. Due to the tolerances involved to press onto the hose and fit tightly - but not _too_ tightly, you may have to print this out, test fit it, and then scale it to get the right fit. I've played around with it some but haven't come up with a size that works between my Prusa and my Monoprice Select Mini with good results. I've got the basic [Shimano SM-DISC-BP bleed...
Topics: brake_bleeding, shimano, brake_bleeder, thingiverse, Sport & Outdoors, bike, disc_brake,...
3
3.0
Mar 13, 2021
03/21
by
Isaak Cole (virtika)
data
eye 3
favorite 0
comment 0
I-Spec II Adapter for a Wolf Tooth (or ZTTO) dropper remote - **Untested** Drafted as a request for another Thingiverse user, I do not have any I-Spec II brakes to test usability. I suspect due to the limited thickness of material for the adapter that it's going to be too flexible in plastic, and also probably too easy to break. Due to the way the adapter is designed, I don't really see a way to fix this as you can't add thickness/material. If it does actually work, let me know - I would love...
Topics: thingiverse, mountainbike, Wolftooth, Sport & Outdoors, mtb, Mountain_Bike,...
