4
4.0
Jul 23, 2021
07/21
by
george austin (callhimgeorge)
data
eye 4
favorite 0
comment 0
a simple chain guard to fix 104bcd sprockets, this is completely toolless all you have to do is melt the pegs at the back to hold them in been using this on my mountain bike for the last month or some and it's perfect it breaks off rather than shattering and id rather print another one than by a new sprocket.
Topics: bike, Outdoor & Garden, ebike, stl, mountainbike, chainguard, nike, mountingbracket, SHIMANO,...
4
4.0
May 1, 2021
05/21
by
Krzysztof Kołakowski (turntablized)
data
eye 4
favorite 0
comment 0
Remixed version of bike chain cleaner based of fozzybear project. Changes made: - much smaller with a 9cm long handle - a lot faster to print - brush pads are closer for those narrow 12 speed chains. - works as a charm.
Topics: stl, bike, Sport & Outdoors, SRAM, SHIMANO, mtb, thingiverse
4
4.0
May 1, 2021
05/21
by
Nathan (hammade001)
data
eye 4
favorite 0
comment 0
This is a simple shim/pad/foot that is 20x15 .24mm thick to be used either as first layer test. or use as a custom support single wall/ thin parts or corners that may want to curl. a little added adhesion goes a long way. Use how ever you deem necessary. If you print at .2 layer height set your first layer to 120 & it will print in one pass.
Topics: stl, First_layer_test, 1st_layer, first_layer, no_supports, supports, SHIMANO, shim, thingiverse,...
3
3.0
May 1, 2021
05/21
by
(mowcius)
data
eye 3
favorite 0
comment 0
This is an adjustable shim designed to adapt mounts designed for 31.8mm bars to 22.2mm bars. Specifically this part was designed to facilitate the use of a Shimano GRX BL812 inline brake lever on a smaller 22.2mm bar. This lever also rests on the bar, which is why the shim is so long. You may wish to shorten it depending on your use. The longer shim section also facilitates using a hose clamp to make sure it's nice and tight where the resting part is. The adjustable nature of this part allows...
Topics: stl, Brake_Lever_Mount, Shimano_GRX_BL-RX812, Sport & Outdoors, shim, thingiverse
3
3.0
Aug 22, 2021
08/21
by
Parker Woolsey (Parkerwww)
data
eye 3
favorite 0
comment 0
No supports. 0.1mm layer height. No bed adhesion. Made for the monstrum lpvo mount and adapted to fit 1" scopes into it.
Topics: Hobby, SHIMANO, shim, thirty, scope, Spaceship, scope rings, lpvo, spconnect, spacer, vortex,...
3
3.0
Oct 14, 2021
10/21
by
Horror Vacui (horrovac)
data
eye 3
favorite 0
comment 0
Adapter to fit MTB bleeding kit funnels (M5) to road lever bleeding port (M7). Install a 1.5mm thick O-ring (or any other size that will seal and allow the threads to engage) on the M7 thread. Check for leaks. If you happen to break the adapter off, you should be able to extract the remaining bit using a 3mm hex key. Don't overtighten!
Topics: thingiverse, stl, bleed_adapter, SHIMANO, Sport & Outdoors, Brakes, Hydraulic_Brakes,...
4
4.0
May 1, 2021
05/21
by
Philipp Schaefer (Oehrly)
data
eye 4
favorite 0
comment 0
Adapter for Shimano 600 EX Arabesque Headsets to 36 mm open-end wrench. You need to print this adapter twice to be able to properly tighten the headset. Therefore, you also need two 36 mm wrenches. I do not recommend using pliers as there is a higher risk of slipping and breaking the printed apart. Each adapter is 7 mm (approx. 1/4 inch) high. You should check before printing whether there is enough clearance, especially at the lower nut (i.e. the one connected to the bearing shell). If not,...
Topics: stl, Tool, Shimano, arabesque, Tools, Adapter, Bike, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Rohan S. (halmos_designs)
data
eye 4
favorite 0
comment 0
A very quick print, strong, and light tool for preloading Bottom Bracket Bearings on Shimano's Hollowtech II bottom brackets. The tool uses a standard 6mm allen key for applying torque and uses considerably less material than the standard tool. An FEA shows the minimal strain and Von Mises Stress when an exaggerated torque of 8Nm is applied.
Topics: thingiverse, functional, bicycle, tool, Shimano_Hollowtech, quick_print, Hollowtech, stl, Tools,...
4
4.0
Jun 11, 2021
06/21
by
Anton Fa (fomenkoa)
data
eye 4
favorite 0
comment 0
Shift levers for standard Shimano (or compatible) friction shifters ie: downtube shifters. Printed and tested on a vintage roadie with good results. Accepts standard gear cables. Note the asymmetry (left vs right shifters) Great for replacing broken/cracked/snapped/lost levers. Assembly hardware required.
Topics: shifter, Sport & Outdoors, thingiverse, downtube, SHIMANO, road_bike, stl
5
5.0
May 1, 2021
05/21
by
Jackson (Life_The_Universe_And_Everything)
data
eye 5
favorite 0
comment 0
This is a pad spacer for hydraulic bicycle brakes. It's used for when the disk/rotor is removed and you don't want the caliper to accidentally compress. This saves you from having to reset the caliper, as well as protecting your bike while traveling. I recommend a decent fill density of 15% or more and a support structure for the best print quality. Hope you enjoy :)
Topics: stl, Bike_MTB, tools, Sport & Outdoors, Brake, SRAM, SHIMANO, mtb, Mountain_Bike,...
3
3.0
Oct 14, 2021
10/21
by
Tim Rechenbach (Z3ALT)
data
eye 3
favorite 0
comment 0
Innenlager-Werkzeug für Lagerschale am Tretlager eines Fahrrads. Das Werkzeug ist für ein Lager mit 20 und 2,5mm breiten Zähnen. Tool Innendurchmesser 28mm, Außendurchmesser 31mm (inkl. Toleranz). Das Werkzeug wurde spontan für einen Nachbarn erstellt und gedruckt.
Topics: Innenlagerschluessel, tretlager, thingiverse, stl, bicycle, SHIMANO, bike, Hand Tools, lager,...
6
6.0
Aug 22, 2021
08/21
by
Robusto (NamNuts)
data
eye 6
favorite 0
comment 0
Redisigned Bleed Cup for bleeding Hydraulic Shimano Brakes. Print does not need Supports (max overhang 50 deg) and walls are optimized for 0.4mm Nozzle size. This Cup has M5x0.8mm thread and standard Plunger Stick can be used. Light filament color is suggested so you can see better the possible impurities and oil level when changing oil and making the brake bleeding.
Topics: SHIMANO, Hand Tools, hydraulic, bleed, Brakes, stl, thingiverse, cup
2
2.0
Jan 18, 2022
01/22
by
Alexey Zakharenkov (Lexapskov)
data
eye 2
favorite 0
comment 0
Переходник позволяющий установить датчик тормозной ручки от электромоторкомплекта на комборучки Shimano ST-EF50. на другую ручку распечатать зеркально. поддержки= обязательно, пластик - любой. потребуется винт м3х5+/-1мм, переходник накидывается на кромку, отверстие сверлится по...
Topics: thingiverse, ebike, SHIMANO, stl, Brake, Sport & Outdoors
3
3.0
Jun 11, 2021
06/21
by
Ritchie Budd (Ritch-t-biscuit)
data
eye 3
favorite 0
comment 0
basic stand for Shimano/SRAM cassette.
Topics: bike, Sport & Outdoors, thingiverse, SRAM, hub, SHIMANO, cassette, stl
2
2.0
Jan 18, 2022
01/22
by
(TreibAir)
data
eye 2
favorite 0
comment 0
The chain guard is designed for a FC-M540 crank on which I removed the smallest and the largest chainring for a 1x conversion. I wanted to keep the chainguard because it is my "everyday-to-the-shops-without-changing-to-cycling-kit"-bike. The included lettering is a reference to a remark in a GCN video. Ride on!
Topics: chainguard, bicycle, thingiverse, bike, crank, SHIMANO, stl, Sport & Outdoors
3
3.0
Jul 3, 2021
07/21
by
hans van lin (hansvanlin)
data
eye 3
favorite 0
comment 0
Chain keeper for rear hub 130 x 5 mm QR. This chain keeper has 2 parts, both mounted for transport and disc only during maintenance or cleaning. Remove the bicycle wheel and Quickrelease (QR) and mount the chain keeper on the quickrelease.
Topics: chain keeper, Tools, thingiverse, shimano, chainkeeper, tool, QR5, sram, bicycle, stl, quick release
3
3.0
Jun 11, 2021
06/21
by
hans van lin (hansvanlin)
data
eye 3
favorite 0
comment 0
The chainkeeper is still under changes and improvements. This chain-keeper tool is a easy to use tool without getting dirty hands. Just move the derailleur aside and pull the chain from the cassette. Now you can remove the wheel and the chain stays in place.
Topics: chain, bicycle, Chain keeper, Shimano, thingiverse, tool, tools, Chainkeeper, Chainlift, Hand...
4
4.0
Aug 8, 2021
08/21
by
one two (PETGore)
data
eye 4
favorite 0
comment 0
Chainring guard that fits on an early 90s Shimano triple crank. The BCD of the 5 screws is 156mm. What is this for? - It keeps your right trouser leg from getting caught in the big chainring while pedaling. Print in PETG for best durability. Fusion 360 source included
Topics: bike, bicycle, thingiverse, Sport & Outdoors, SHIMANO, Chainring_Guard, stl, chainring
3
3.0
Jun 11, 2021
06/21
by
Tom Janssens (mr_robot92)
data
eye 3
favorite 0
comment 0
Work in progress...
Topics: clipless_pedals, pedals, Sport & Outdoors, thingiverse, SHIMANO, stl
2
2.0
Sep 13, 2021
09/21
by
Jan Schenk (Coat)
data
eye 2
favorite 0
comment 0
Holder for Darfon e-bike charger. It is not a beauty, but it is easy and functional. The charger will sit sturdy but is also easy to remove. The hooks are a little angled to give more room for the cables but keep it as flat as possible. Dimensions of the charger ca. 174x75x34 mm (6.85x2.95x1.34 inch). Happy charging :) PS. After publishing i saw a similar design for a Bafang-charger, so if you are looking for that: https://www.thingiverse.com/thing:4922736
Topics: Chargeur, stl, Cargador, thingiverse, charger, bike, Shimano, e-bike, ebike, lader, Household,...
3
3.0
Oct 26, 2021
10/21
by
Marcus Bucher (McBucher)
data
eye 3
favorite 0
comment 0
Adapter to install direct mount front derailleur with standard frames (34.9 mm outer seat tube diameter). For installation please heat it up that it gets flexible. I did not want to introduce a second screw.
Topics: direct_mount, SHIMANO, stl, 3D Printing, thingiverse, adapter
5
5.0
Jan 16, 2021
01/21
by
Guillaume van Renterghem (B12LeSuppo)
data
eye 5
favorite 0
comment 0
Disclaimer: Only to be used on private road This system allows for the bike engine to believe it is going at 25km/h (and hence continue to help up to the believed 25km/h) whereas it is going c. 50% faster (based on the ration of the 2 wheels. For this you will need the following extra items: - 1 rubber band 70 x 5mm - 1 rubber band 200 x 10mm - 2 ball bearings 608ZZ - 1 magnet 10x10x3mm - some superglue - 1 polyester thread Print the following (me I did in PTEG) at c. 20-30% infill - Hub part 1...
Topics: DIY, thingiverse, Enviolo, SHIMANO, bicycle, Electric bike, stl
4
4.0
May 1, 2021
05/21
by
Tarmo Kübard (tarmik)
data
eye 4
favorite 0
comment 0
A cover for your downtube shifter bosses when you are not using them. The shape matches with the shifter cable stoppers from Shimano and Dia-Compe. Use a M5x10mm bolt.
Topics: stl, downtube, Sport & Outdoors, cover, shifter, dia-compe, SHIMANO, boss, thingiverse
3
3.0
Jun 10, 2021
06/21
by
Jakub Jirkuv (Kubakubula)
data
eye 3
favorite 0
comment 0
Remix of Bicycle Gear Indicator. Cover added. Perfectly works with my 11sp Shimano XT shifter. Index fits tightly - there is no need to glue it. I advice to print cover with concentric pattern due to higher transparency.
Topics: indication, mtb, shifter, Sport & Outdoors, thingiverse, bycicle, Gear, SHIMANO, stl
2
2.0
Sep 13, 2021
09/21
by
char on (char0n)
data
eye 2
favorite 0
comment 0
Support is needed for the plug-holder, for my printer settings it was very easy to remove and the plug fits like a glove. Wall thickness is more important than infill. The holes for the screws are 3,4mm in diameter. I had some 3mm countersunk wood screws which fit very well. Designed with OnShape https://cad.onshape.com/documents/27bf0cf4e9c86d4abf45f5ca/w/de6ee79f73d1d33ba4910bf9/e/627bd84e37dfb56f37eda52b
Topics: stl, batter charger, thingiverse, shimano, e6002, Sport & Outdoors, holder
3
3.0
Oct 15, 2021
10/21
by
t n (tnl)
data
eye 3
favorite 0
comment 0
Homemade Cleat Wedge for Look. 1 degree cleat wedge. Compatible with look and shimano 3 hole systems.
Topics: cleat, thingiverse, look, stl, look_keo, shimano_cleats, spacer, Sport & Outdoors, wedge, Keo
2
2.0
Nov 30, 2021
11/21
by
Alexander Schulz (dead_sailor)
data
eye 2
favorite 0
comment 0
Hose cutter for MTB disk brake lines. Cuts the brake hose at an perfect 90° angle using standard blades (Teppichmesserklingen in Germany). Slightly bend the inner slider to insert the blade. The blade should then be tightly secured in place. I printed it with PLA but PETG or other materials should work also.
Topics: hydraulic_hose_cutter, jagwire, tube, SRAM, hose, mountainbike, Mountain_Bike, thingiverse, mtb,...
2
2.0
Jan 18, 2022
01/22
by
Isaak Cole (virtika)
data
eye 2
favorite 0
comment 0
22.2mm bar clamp to mount an I-Spec EV shifter or dropper lever. Uses: * 1x M4x15mm bolt + M4 nut * 1x M5x12mm bolt + washer Print with 4+ wall thickness and 100% infill. You may find it difficult to get the M4 nut into the recess if your printer calibration is a little off - would recommend -0.1mm expansion if this is the case. M5 threads have been modeled into the mount to attach the shifter, but I would recommend chasing them with an M5 tap using some lubricant. Due to the small wall...
Topics: thingiverse, shifter, ISPEC-EV, SHIMANO, stl, ispec-ii, Sport & Outdoors, ispec
5
5.0
May 1, 2021
05/21
by
Maks Kremenev (Brother_Thief)
data
eye 5
favorite 0
comment 0
Hexagonal model, glued directly into the head of the bolt on the brake lever.
Topics: stl, bicycle_disc_brakes, Shimano_hydraulic, Sport & Outdoors, Brake, MTB, Knob_shimano,...
2
2.0
Nov 30, 2021
11/21
by
LF BRG (Vertigo73)
data
eye 2
favorite 0
comment 0
When riding a Mtb with the Shimano Steps motor up the hill with the helmet on the handlebars, there is the annoying tendency of the buttons to be pressed randomly by the helmet. This thing solves the problem ;)
Topics: handlebar, eMTB, Protection, thingiverse, mtb, SHIMANO, ESteps, stl, Sport & Outdoors
2
2.0
Aug 22, 2021
08/21
by
OMIROS AMPATZIS (omhrosa)
data
eye 2
favorite 0
comment 0
This is a tool to properly align your mtb spd cleats on your shoes it features metatarsal bones alignment ,the center of your cleats (small triangles) must be crossed by the same line connecting the two bones (this does not dictate the rotation of the cleats only the fore aft positioning) https://www.youtube.com/watch?v=Re00TwUyMZo&list=WL&index=8 a shoe tilt helper and guide enjoy
Topics: SHIMANO, cleats, bicycle_tools, Sport & Outdoors, bicycle, shimano_cleats, spd, stl, thingiverse
3
3.0
Jun 6, 2021
06/21
by
Alex Gr (nosbiker)
data
eye 3
favorite 0
comment 0
Hello, The Pas Sensor BZ-10C didnt fit on the "old" M770 Shimano XT crank. So cut the "holder" from the BZ-10C magnetic wheel and put the wheel on my adapter. Than on the crank. and the disc is 100% centered and runs smoothly. its a remix from 4358919
Topics: thingiverse, ebike, shimano, 3D Printing, crank, pas sensor, pas holder, Bafang,...
3
3.0
Jun 22, 2021
06/21
by
was jans (wasjans)
data
eye 3
favorite 0
comment 0
I borrowed a chaingaptool and decided to design one for myself (and you) I made a photo, exported to stl, edited in 3d-builder and tinkercad. Its fits fine on my shimano xtr and 45 tooth rear chainwheel. Easy way to correctly adjust the space between top derailleurwheel and the largest chainwheel.
Topics: stl, thingiverse, chaingap, SRAM, SHIMANO, tool, derailleur, Hand Tools
6
6.0
May 1, 2021
05/21
by
Mark H (5ppppp)
data
eye 6
favorite 0
comment 0
This is an adapter to make a SRAM Double Tap 11-speed shifter work with a Shimano 11-speed road rear derailleur. It replaces the red cable takeup spool inside the SRAM shifter and pulls the slightly smaller amount of cable that Shimano road rear derailleurs need. Because of variations in 3D printers, especially when printing holes in parts, I needed to make a number of iterations, especially since my 3D printer is poorly tuned. Included is that file. I have also included the Fusion 360 design...
Topics: stl, Sport & Outdoors, derailleur, shifter, SRAM, SHIMANO, shifter_adapter, thingiverse,...
3
3.0
Oct 14, 2021
10/21
by
Marcelo Moreira Xavier (mmxavier)
data
eye 3
favorite 0
comment 0
This a part to solve a frequent problem with Shimano 105 (R7000 series) and Ultegra (R8000 series). For some reason, after a few months in use, the shifter stops engaging to chance the front gear. The solution (if there is no warranty) is to change or customize the part named "Main Lever Support" (Y63X80010), adding about 3mm to it. I designed a slight different replacement, but with the aditional 3mm in thickness. The diferences aim to make the part stronger on thin walls and easyer...
Topics: thingiverse, stl, Shimano, Lever, Sport & Outdoors, 105, Ultegra, STI
2
2.0
Nov 8, 2021
11/21
by
Arne Heremans (Arne_h)
data
eye 2
favorite 0
comment 0
Remixed from: https://www.thingiverse.com/thing:4980184 I edited it to be the original dimensions since I had this part missing. Works like a charm with the 3D-printed part. (Y63X80010)
Topics: Sport & Outdoors, stl, SHIMANO, Ultegra, 105, shifter, thingiverse, destiny
2
2.0
Nov 30, 2021
11/21
by
Mark H (5ppppp)
data
eye 2
favorite 0
comment 0
#What this project is These are parts to upgrade a Shimano 105 ST-5800 road bike STI shifter from 11 speed to 12 speed. They may also work on other Shimano 11-speed shifters- especially ones that route the shifter cables under the bar tape- but I have not verified that yet. #Parts Needed Only two pieces are needed: one PR part (for Primary Ratchet) and one SR part (for Secondary Ratchet). It would be nice if the SR part was the same series as the PR- 1.5 or 2.5- but it's not important. **For...
Topics: thingiverse, shifter, 5800, 105, shimano, stl, 12-speed, bike, Sport & Outdoors
2
2.0
Aug 8, 2021
08/21
by
Martin Macko (sniperKE)
data
eye 2
favorite 0
comment 0
Just made it full version and added 0.2mm on each side. Thx
Topics: thingiverse, bleed_block, 4-piston, SHIMANO, Vehicles, stl
4
4.0
Mar 16, 2021
03/21
by
Agus Palla (pallardo_tech)
data
eye 4
favorite 0
comment 0
For Shimano Alivio M4050 M4060 Printed with pet-g, no supports, fits perfect
Topics: protector, Sport & Outdoors, thingiverse, Shimano_Hollowtech, Shimano, Crank, Alivio,...
4
4.0
May 1, 2021
05/21
by
Isaac Yamamoto (Isaac4664)
data
eye 4
favorite 0
comment 0
Tool to hold bleed tube over nipple of Shimano brake calliper. Hole sizes are 5.6mm, 5.8mm, 6mm, 6.2mm, 6.4mm and 6.6mm to accommodate differ tube thickness and tolerances.
Topics: stl, Tools, nipple, SHIMANO, tube, bleed, nipple_clamp, thingiverse
4
4.0
May 1, 2021
05/21
by
Michael Carey (Prophet254)
data
eye 4
favorite 0
comment 0
Brake bleeder bucket for shimano brakes. I was too lazy to spend 5 hours printing the other designs so i designed this to screw onto a standard bottle to use as the bucket so that your valuable time is spent printing the threads and not the bucket :).
Topics: stl, Lazy, Shimano_hydraulic, Mtb Bleeder, Brake bleed, Tools, mtb, thingiverse, Mtb brake, Shimano
5
5.0
Jan 9, 2021
01/21
by
(mugi0482)
data
eye 5
favorite 0
comment 0
Spacer for my Shimano BR- M8000 disc brake to prevent the brake piston from accidentally extending when the tire is removed. Should also work with other Shimano brakes that use G03S pads.
Topics: SHIMANO, Shimano_Disc, thingiverse, Sport & Outdoors, stl, Brake, bicycle_disc_brakes, spacer
2
2.0
Dec 1, 2021
12/21
by
woernersen woernersen (woernersen)
data
eye 2
favorite 0
comment 0
This is a Shimano Cassette with 11-28 grading. I printed already the spider and the 28-teeth-chain
Topics: chain, thingiverse, cassette, road_bike, SHIMANO, stl, Sport & Outdoors, bike
2
2.0
Oct 29, 2021
10/21
by
e&h Design (guppyk)
data
eye 2
favorite 0
comment 0
Here something I realize not everyone will need but that may come extremely handy in case you do. This is an adapter ring (sizes 1-5 mm) to mount narrow (6-9 speed) Shimano® cassette sprockets to 11 speed road freewheel cassettes. In my case I needed to mount a 7-speed Shimano cassette to an 11-speed cassette mount on my Elite smart trainer. My trainer came with a pre-installed Shimano 105 (or equivalent) 11-speed cassette mount, which was just too wide for the 7-speed cassette sprocket I...
Topics: thingiverse, road_bike, gear, bearing, SHIMANO, stl, shift, rotor, hub, freewheel, cassette, gears,...
3
3.0
Jul 3, 2021
07/21
by
Neil Graham (Slegnor)
data
eye 3
favorite 0
comment 0
[If you find my designs useful, please consider sending a tip](https://www.paypal.com/paypalme/slegnor/1) Simple dust cover for my wife's Giant Boulder Shimano FC-TX70 Crank, using the 8 mm hex fitting to hold it in place. Print Settings: Quality: 0.2 Infill: 100% Brim: Yes (Personal Preference) Supports: No Material: PLA
Topics: SHIMANO, Dust Cap, FC-TX70, Crank Cover, FC-TX71, Giant Boulder, Crank, Sport & Outdoors, Crank...
2
2.0
Dec 1, 2021
12/21
by
Marcin Miszewski (666cin)
data
eye 2
favorite 0
comment 0
Hello, Here is my design of Shimano Bleeding kit. Fits perfectly. No additional seals are needed - use the one from protective screw. Thread printed with 0.1mm resolution, the rest with 0.2mm. Manufacturer Part Number: E-SMDISCBP Compatibility: XTR: - BL-M988 - BL-M985 - BL-M9000 - BL-M9020 - BL-M9100 - BL-M9120 XT: - BL-M785 - BL-M8000 - BL-M8100 Saint / ZEE: - BL-M820 - BL-M640 SLX: - BL-M675 - BL-M666 - BL-M7000 - BL-M7100 Deore: - BL-M596 - BL-M615 - BL-M6000 - BL-M6100 Alivio / Acera: -...
Topics: Hydraulic_Brakes, SHIMANO, thingiverse, stl, Sport & Outdoors, bicycle_disc_brakes
3
3.0
Mar 16, 2021
03/21
by
Bryan Bütow (master2bryan)
data
eye 3
favorite 0
comment 0
Ich habe für ein Ritzel mit 40 Zähnen einen Kettenschutz entworfen. 96mm Lochabstand
Topics: chainguard, Sport & Outdoors, thingiverse, SHIMANO, kettenschutz, stl
4
4.0
Mar 15, 2021
03/21
by
Igor Gratch (IgorGratch)
data
eye 4
favorite 0
comment 0
Replacing the axle bolt for Shimano pedals.
Topics: bolt, Sport & Outdoors, thingiverse, SHIMANO, stl, pedal, axis
Shimano parts catalog and diagrams for mountain biking rear derailleurs mentioned in dealer's manual DM-MARD001-04 Includes: EV-RD-M5100 (11 speed) EV-RD-M6100 EV-RD-M7100 EV-RD-M7120 EV-RD-M8100-GS EV-RD-M8100-SGS EV-RD-M8120 EV-RD-M8130 (11 speed) EV-RD-M9100 EV-RD-M9120
Topics: shimano, spare parts, catalog, manual, bikes, rear derailleur, xtr, xt, slx, M9100, M8100, M7100,...
Shimano dealer's installation manual for RD-M9100 (XTR), RD-M8100 (XT), RD-M7100 (SLX), RD-6100 (Deore), RD-M5100 mountain bike rear derailleurs
Topics: shimano, manual, bikes, rear derailleur, M9100, M8100, M7100, xtr, xt, slx
