3
3.0
Apr 1, 2021
04/21
by
Falko Tressl (Kadara)
data
eye 3
favorite 0
comment 0
This is a wallmount for Gravity Wave pc speakers. You have to grind an M5 screw for the tops. Tis way the screw cant turn any more and you can thighten the speaker.
Topics: Audio, Speaker_mount, stl, thingiverse
5
5.0
Apr 5, 2021
04/21
by
Peter (petergross3)
data
eye 5
favorite 0
comment 0
Wall and corner mounts for Sony SS-MSP2 home theater speakers... but could work for similar sized speakers.
Topics: thingiverse, Speaker_mount, Music, stl
3
3.0
Apr 28, 2021
04/21
by
(sandantana)
data
eye 3
favorite 0
comment 0
Meant to interface with "megaphone for smartphone with cable hole" made by IFUJI, this bracket has a snap lock that fits into the cable slot on the megaphone to allow it to be mounted to the wall. I used a command strip to secure the bracket to the wall, but also included a hole for a nail if desired. Note: I included a 1 mm wide support under the snap lock to allow this to be printed vertically, which needs to be cut off after printing (easily done with side cutting pliars). If you...
Topics: stl, thingiverse, Audio, Speaker_mount
6
6.0
Apr 20, 2021
04/21
by
Tyler Hayman (ItsAtlasX)
data
eye 6
favorite 0
comment 0
It is a 58mm x 111mm x 108mm Klipsch promedia 2.1 or 5.1 Left and Right speaker wall mount.
Topics: thingiverse, Tools, stl, Speaker_mount
3
3.0
May 1, 2021
05/21
by
Kent Timm (Evil_Smurf)
data
eye 3
favorite 0
comment 0
Replacement speaker mounter for Motorola NSN6029A
Topics: stl, thingiverse, Speaker_mount, Electronics
6
6.0
Mar 16, 2021
03/21
by
Bravo Foxtrot (rDigital)
data
eye 6
favorite 0
comment 0
This is for a UE Boom and adjustable to fit other even larger popcan style speakers. 6 x .470 diameter neodymium magnets go right into the slot in the back. The mount is secured with 1/4"-20 x 2 1/2" bolts and captive 1/4"-20 nuts that fall right into the slots. I used N35 grade magnets and they work, but for optimal holding power, get N52+ magnets.
Topics: stl, Audio, Speaker_mount, thingiverse
3
3.0
Jun 12, 2021
06/21
by
Justin Richeson (NeoMatrixJR)
data
eye 3
favorite 0
comment 0
I have an exposed Steel I-Beam in my basement. Using these to hang some small HTIB speakers from thekeyhole mount.
Topics: thingiverse, Speaker_mount, Audio, stl
4
4.0
Mar 19, 2021
03/21
by
nullset (nullset)
data
eye 4
favorite 0
comment 0
This is a module for creating an adapter allowing you to install a larger speaker in a smaller speaker hole (like a dashboard).
Topics: Speaker_mount, thingiverse, Automotive, stl
7
7.0
Jan 20, 2021
01/21
by
Timmy Turner (ftwelve)
data
eye 7
favorite 0
comment 0
I remixed's Makedave's speaker mount to have a second axis, so now you can move the mount up and down and side to side.
Topics: Music, stl, Speaker_mount, thingiverse
6
6.0
Mar 16, 2021
03/21
by
sinan yılmaz (silmaz40)
data
eye 6
favorite 0
comment 0
This is a speaker mount design for Logitech Z5500
Topics: stl, Audio, Speaker_mount, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Pertti Tolonen (petolone)
data
eye 4
favorite 0
comment 0
Yet another remix of the front panel from Back Horn Speaker https://www.thingiverse.com/thing:4735340. I found the original, flat bottomed front plate tricky to mount as it was (a) floating on top of the protruding edge of the speaker foil and (b) even on the metal frame of the speaker. Hence: Here is the same from plate with recesses to mitigate both (a) and (b). I have printed already to the final version of my speaker pair. No photo included as from outside they look 100% the same as the...
Topics: thingiverse, Speaker_mount, Audio, stl, frontplate
3
3.0
Mar 25, 2021
03/21
by
Tobias Ries (exean)
data
eye 3
favorite 0
comment 0
35mm flange, for speakers or similiar
Topics: stl, flange, Speaker_mount, Music, thingiverse
3
3.0
Jun 21, 2021
06/21
by
Nathaniel Schied (BerzerkTD4W)
data
eye 3
favorite 0
comment 0
Had extra 6.5" car speakers, cutout is 5.75" diameter, box is a 7.5" cube with the cap attached, walls 1/4" thick. rear hole for wire terminals is 2" in diameter. Printing: I just used 10% infill, all other settings default.
Topics: Audio, thingiverse, stl, Loudspeaker, Speaker_mount
5
5.0
Mar 22, 2021
03/21
by
Tom Setliff (tsetliff)
data
eye 5
favorite 0
comment 0
I wanted to mount https://smile.amazon.com/gp/product/B07D6YR9CH onto 80/20 with a T-Nut but this mount should work with these (not loud but I just needed to connect them to hear a pi on the robot) speakers to connect to anything with a 1/4" screw. It is a tight fit so other cube speakers might not fit even if they are a mm different.
Topics: Speaker_mount, stl, openscad, Audio, thingiverse
3
3.0
Mar 24, 2021
03/21
by
Dave Struve (DaveStruve)
data
eye 3
favorite 0
comment 0
This is a 2 piece wall mount bracket for the new black version of the sonos amp. You'll need: (3) 3mm x 15mm nuts and bolts. (1) 1/4" 20 bolt cut to some length (I'm not sure what it was, I just used a dremel to get it to the needed size), this it screwed into the back of the amp and slots into the keyway on the bracket. (2) wall anchors (I used the white plastic screw style anchors)
Topics: stl, Speaker_mount, thingiverse, sonos, Household
4
4.0
Apr 4, 2021
04/21
by
Marshall Eubanks (marshaul)
data
eye 4
favorite 0
comment 0
This is a holder for the JBL Flip 4 which is designed to mount onto a 1/2' T-slot, like those commonly found in kayaks and small fishing boats for use as pole holders, GPS mounts etc. It uses a separate T-bolt and nut to secure it to the track, and features two pegs which index in the track to prevent clocking. I liked the basic idea of the original version of this mount, but the backpack part wasn't useful. Initially, I contacted the author to see about getting the Fusion design files, but he...
Topics: thingiverse, Speaker_mount, Audio, stl, kayak
3
3.0
Jun 21, 2021
06/21
by
Nathaniel Schied (BerzerkTD4W)
data
eye 3
favorite 0
comment 0
Had extra 6.5" car speakers, cutout is 5.75" diameter, box is a 7.5" cube with the cap attached, walls 1/4" thick. Screw holes should be sized for #6 wood screws, .138" diameter. Intended speaker is Skar TX65, with included covers. Printing: I just used 10% infill, all other settings default.
Topics: Audio, thingiverse, stl, Loudspeaker, Speaker_mount
10
10.0
Jan 18, 2021
01/21
by
Andreas Beck (4ndi)
data
eye 10
favorite 0
comment 0
Blanket Mount for TEUFEL Speakers
Topics: Speaker_mount, thingiverse, Organization, stl, blanket
4
4.0
Mar 16, 2021
03/21
by
Jaakko Leino (JaakkoL)
data
eye 4
favorite 0
comment 0
A shorter version of this great design.
Topics: thingiverse, Speaker_mount, DIY, stl, HarmanKardon
3
3.0
Oct 15, 2021
10/21
by
Christopher Nason (Zimzerveran)
data
eye 3
favorite 0
comment 0
This is a simple bracket I designed to hang my small SoundBot bluetooth speaker under a shelf above my laptop. I printed two and mounted them with small screws. So far, they're sturdy enough. The bracket has three spots for screws, but two was plenty for this little speaker. Created in TinkerCAD. Feel free to remix this thing if you find it useful!
Topics: thingiverse, stl, Organization, Speaker_mount, bracket
8
8.0
Apr 17, 2021
04/21
by
Make Cents (MakeCents)
data
eye 8
favorite 0
comment 0
Made this for my Kia Optima rear door speaker replacement. The speaker that came off had an incorporated bracket that was a part of the speaker and a normal 6.5 inch speaker holes didn't line up. I soldered the wires to the speaker clip harness, cut a little groove in the plastic mounting box on the door for the wire, and clamped in the speaker with this bracket. I reused the foam cushion on the bracket. This thing was made with Tinkercad. Edit it online...
Topics: thingiverse, Speaker_mount, 3D Printing, stl
7
7.0
Apr 19, 2021
04/21
by
Meik W. (Niun)
data
eye 7
favorite 0
comment 0
Print settings: Support: yes Res: 0.2
Topics: thingiverse, stl, Speaker_mount, Electronics, table
4
4.0
Apr 2, 2021
04/21
by
gonzalo acevedo (gaceved)
data
eye 4
favorite 0
comment 0
This ring adapter fit perfectly with Mitsubishi Montero Sport
Topics: Automotive, thingiverse, speaker, Speaker_mount, stl
4
4.0
Mar 16, 2021
03/21
by
Brandon Nickel (Bedrock608)
data
eye 4
favorite 0
comment 0
This is a GoPro style mounting bracket for holding a Genelec 8010A studio monitor to a 40mm wide channel with an 8mm slot. I use it for mounting speakers to my monitor stand on my sim rig. The mount is designed to use an M6 nut and M6 x 30mm bolt or socket-head cap screw. Mount using an M6 bolt and a T-nut. Sketchup files are attached for your usage. This mount uses the two 6mm mounting holes which are 3" (76.2mm) apart. Attach the mount to the channel first and then attach the mount to...
Topics: Music, thingiverse, Speaker_mount, Genelec, stl
4
4.0
Apr 16, 2021
04/21
by
ADDprint.dk (ADDprint)
data
eye 4
favorite 0
comment 0
Adjustable wall mount for Sonos Play 1 speakers. The mount can be turned 45 degrees to each side. The two parts are connected with a M6x80mm bolt and nut. The power cable for the speakers can go up under the wall part. Designed by www.ADDprint.dk
Topics: thingiverse, Speaker_mount, stl, Audio, Sonos
4
4.0
Jul 3, 2021
07/21
by
Paul Ledger (Pledg)
data
eye 4
favorite 0
comment 0
Replacement speaker mount for BBC Micro computer accepts a 50mm dia speaker. Amended the original design to hold the speaker rather than sticking it to the keyboard PCB
Topics: Computer, Speaker_mount, bbc_micro, thingiverse, stl
5
5.0
Apr 20, 2021
04/21
by
Ken Williams (kwilliams312)
data
eye 5
favorite 0
comment 0
This is a simple spherical mount for the Scanspeak R2004/602000 Ring Radiator speaker. These were designed for universal mount in a car (preferably on the A-Pillar). Assembly with lamp nipples (threaded all-thread) and a sleeve to hide the all-thread.
Topics: thingiverse, stl, Speaker_mount, Music, car_audio
4
4.0
Dec 1, 2021
12/21
by
Scott Blenkhorne (sblenkhorne)
data
eye 4
favorite 0
comment 0
This is a mount I designed for speakers I wanted to repurpose for my virtual pinball cabinet build. The speakers used to be in a pair of bookshelf speakers from a broken CD player. I pried open the speaker boxes to remove the speakers, but then needed a way to mount them in my cabinet. I wanted to mount them so I didn't need to use any screws on my backglass, so this is the design I came up with. This design accommodates the main speaker plus the connected tweeter. If you'd like an adjusted...
Topics: Electronics, Speaker_mount, virtual_pinball, thingiverse, stl
4
4.0
Mar 31, 2021
03/21
by
ArreglamosTODO (emudem)
data
eye 4
favorite 0
comment 0
Es un adaptador para poner un altavoz de 3,5 pulgadas en el hueco de un 4 pulgadas.
Topics: thingiverse, speaker, adapter, Speaker_mount, Audio, stl
11
11
Apr 16, 2021
04/21
by
Dave Long (supinemonkey)
data
eye 11
favorite 0
comment 0
Update: 9-30-15 I designed some printed-in options for the swivel. There is a snap-in wedge and a rod that you can melt into a capture rivet if that works better for you. This is part of my personal projector mod handle, which will help make this a portable, potentially battery powered HD projection setup that could go anywhere in a backpack. Simple swivel for speakers or whatever. Might also be cool to scale up to make a lazy susan-style tablet base. Just print both sides and sandwich together...
Topics: swivel, thingiverse, speaker, Speaker_mount, stl, DIY
5
5.0
May 1, 2021
05/21
by
Marius Weum Stick (Snufsen)
data
eye 5
favorite 0
comment 0
Wallmount for a Logitech speaker
Topics: stl, speaker_mount, speaker, Office, logitech, thingiverse
3
3.0
Jan 5, 2021
01/21
by
Gunnar Holm (gunnarholm)
data
eye 3
favorite 0
comment 0
Adapter / mount to fit aftermarket 6 1/2" speakers in Nissan Leaf. Only tried in the front doors, but rear doors are supposed to be the same. This sample works with https://www.mds.se/9000383.html The Fusion 360 file is included should you need to modify for a different speaker. The connector from the original speakers fit in the rectangular hole in the adapter.
Topics: stl, Automotive, nissan_leaf, thingiverse, Speaker_mount
11
11
Jan 9, 2021
01/21
by
Sönke D. (ardunoid)
data
eye 11
favorite 0
comment 0
I created this to mount my 5.1 speakers in a 45 degree angle on the wall. The speakers have hole to mount on a screw or a button in the wall so i created it to mount the speakers on this hole. I added 2 4mm holes to mount the mounts on the wall. Edit: 207-02-04 6:46pm: I Uploaded V2 right now.. First print lost the Pins while removing the Supports, i think they weren't even attached... Edit 2017-02-05 8:45 am; Another edit: The holes were only 2mm, but should be 4mm. Changed that and...
Topics: thingiverse, Speaker mount, stl, Audio, LG 5.1
4
4.0
Apr 1, 2021
04/21
by
bob murphy (thisoldgeek)
data
eye 4
favorite 0
comment 0
This is a collection of speaker grille parts: * simple ring for outside a speaker; can be used as a "captive" ring to hold a metal mesh in pace * ring plus grille with a pattern of circular holes * ring plus grille with pattern of square holes * ring plus grille with a pattern of hexagons and diamonds * Fusion 360 design files See the "How I designed this" section for more details on modifying the parts
Topics: grille, thingiverse, speaker, Speaker_mount, Music, stl
1
1.0
Apr 19, 2022
04/22
by
Michael Wilkinson (mindmatter1216)
data
eye 1
favorite 0
comment 0
6.5 inch Front Speaker Mount - Honda Accord 1999-2004 Replaces factory speaker mount with larger speaker. Check for fit and adjust accordingly.
Topics: honda_accord, thingiverse, Automotive, Speaker_mount, stl
10
10.0
Apr 17, 2021
04/21
by
Ben Hennessy (qbox)
data
eye 10
favorite 0
comment 0
Jaycar AS-3006 Speaker holder. 1w 8ohm 3"
Topics: 3D Printing, Speakers, thingiverse, Speaker_mount, stl
6
6.0
Jan 20, 2021
01/21
by
Angelo Val (Akridas66)
data
eye 6
favorite 0
comment 0
i just wanna something so i can have my right speaker beside my pc monitor and no at the back where i lose so sound quallity but my desk is too small. so i make this mount to sit on. does the job nicely. you only need to screws to mount it. 15% infill 0.2 layer height support yes it's my first desing so show some love.....
Topics: thingiverse, desk mount, speaker mount, Other, stl
4
4.0
Jun 12, 2021
06/21
by
BenJ π (BenjiP)
data
eye 4
favorite 0
comment 0
Hi everyone ! I have made a platform + a speaker holder for my videoprojector. It is very useful when you have to move it somewhere else, you just have to pick it all in one. I have added step file if you want to modify it to fit for your own design. My videoprojector is a VEAMA 805B. The platform help to mount it on a camera holder. Enjoy it !
Topics: videoprojector_mount, Camera, thingiverse, Speaker_mount, stl
2
2.0
Jan 18, 2022
01/22
by
Matt Graham (Entropy4U)
data
eye 2
favorite 0
comment 0
Ceiling mount For PartsExpress AET HT-200SF or AET HT-200SB. The blind ceiling screw is the version that I used, but hard to attach. I would recommend the tool access version even though I have not tested it. These speakers did not sound good when I unboxed them. They have a rather complex crossover network for such cheap speakers, and the end result was not good. I have the 4ohm unbranded version, I wound up chucking the entire crossover PCB and just using the 26uF cap from it to high pass on...
Topics: thingiverse, Audio, surround_sound, Speaker_mount, stl
3
3.0
May 1, 2021
05/21
by
Jörgen Nilsson (Skrot)
data
eye 3
favorite 0
comment 0
Simple box/tube for installing 10 cm speakers behind the seats in a Mazda Miata / MX-5 NB (don't know if NA looks the same). It's secured using the original screws on either side, the ones with the plastic cone-thing. Thus no drilling in the car needed. Though drilling is needed in the tube/tower for the speakers screws. Should be noted if it's not clear from the pictures, my car has no soft-top, only hardtop. There is not space for these if you still have a soft-top. My speakers are 50 mm deep...
Topics: stl, Miata, Automotive, Speaker_mount, mx5, thingiverse
6
6.0
Jun 21, 2021
06/21
by
Mickey Yang (mickeyjc)
data
eye 6
favorite 0
comment 0
A make for the Bose SoundTouch 300 Virtually Invisible Rear Speaker Adapter Mount. The original one is too expensive, so I decided to print one myself.
Topics: Music, thingiverse, soundtouch, stl, Speaker_mount, bose
8
8.0
Jun 20, 2021
06/21
by
(cshapiro)
data
eye 8
favorite 0
comment 0
A parametric mount for the small speakers commonly found in cheap radios and PC cases. This allows you to mount your speaker on a flat substrate, e.g. a piece of wood. Made for an Arduino-powered buzz wire game.
Topics: speaker mount, speaker, thingiverse, arduino, stl, Parts
9
9.0
Jun 10, 2021
06/21
by
Soxs Carter (Catsrules)
data
eye 9
favorite 0
comment 0
This is a speaker mount for a Logitech Z-5500 speaker (Not the center speaker). It is designed to mount on a 35mm pole monitor mount. (Something like this https://www.newegg.com/Product/Product.aspx?Item=9SIA3BG3TE0639) I have two of these poles so I can mounted it on either side of my desk. Most people probably only have 1 so this wouldn't help much. Unless You mount them right on top of each other. If was was going to design this again I think I would make the clap a little bit thicker. As...
Topics: Office, thingiverse, Speaker_mount, logitech_z5500, stl
7
7.0
Mar 9, 2021
03/21
by
Alexander (mrmadalex)
data
eye 7
favorite 0
comment 0
This is a replacement for a part of the Jamo A410 Speaker Mount. When you have the A410 and you are missing this part, then you know what you are looking for! It's the black circle part in the photo. I used two 4x40 screws to mount it to the wall.
Topics: Speaker_mount, stl, thingiverse, Replacement Parts, Jamo
5
5.0
Jan 4, 2021
01/21
by
Kasper Jepsen (Rapzak)
data
eye 5
favorite 0
comment 0
Bottom mount bracket for Jamo D500 which add the option to tilt the speaker. In the top there is used a hook in the desired length
Topics: stl, Jamo, thingiverse, Speaker_mount, Audio, D500
2
2.0
Apr 19, 2022
04/22
by
Bjoern Gorsler (bjoerng)
data
eye 2
favorite 0
comment 0
Simpler Halter für die Lautsprecher in meiner Werkstatt. Gedruckt habe ich ihn in PETG mit 50 % Infill. have fun
Topics: thingiverse, Speaker_mount, speaker, mount, Other, stl
3
3.0
Apr 21, 2021
04/21
by
Sinan Dülger (SinanDulger)
data
eye 3
favorite 0
comment 0
This piece has been designed to be a speaker stand. It is very simple to use. Just clamp the table from any side you want and don't look back. It has a very decorative design on the column around and the edge of the speaker platform. It has a strong structure. I believe that it can be used for a long time. I wish good luck to those who want to try it. And I wait for your suggestions.
Topics: thingiverse, stl, Speaker_mount, Art, speaker_stand
4
4.0
Jun 22, 2021
06/21
by
Matias Lappi (MatiMati918)
data
eye 4
favorite 0
comment 0
A mount for the wireless surround speakers found on older models of JBL 5.1 soundbar. I used two 3M Command picture hanging strips to attach each mount to wall. The 3M adhesive strips should be available fairly widely and inexpensively but there's no reason why picture hanging strips from other manufacturers wouldn't work as long as they're strong enough. You should print these in upright position (the same orientation as in the picture) I designed these mounts because I didn't want to make...
Topics: stl, Speaker_mount, thingiverse, surround, Audio, JBL
3
3.0
May 1, 2021
05/21
by
Danny Binkofsky (Dannybinks)
data
eye 3
favorite 0
comment 0
The speaker rings included didn't work for the speakers I wanted to use. I made these in fusion 360 to adapt my speakers (https://www.parts-express.com/Eminence-Alpha-4-4-4-Full-Range-Pair-4-Ohm-290-4010). It requires modifying the speaker slightly for everything to line up and sit flush.
Topics: stl, speaker, Speaker_mount, thingiverse, 3D Printing
4
4.0
Apr 12, 2021
04/21
by
Austin Taft (adtaft)
data
eye 4
favorite 0
comment 0
I made this simple mount to attach my speaker to my longboard for more exciting rides to class. It's a very specific audience but if you can use/modify it, be my guest.
Topics: thingiverse, speaker_mount, Audio, stl, Photive, Hydra
