1
1.0
Oct 29, 2021
10/21
by
Nicholas Nguyen (osunick)
data
eye 1
favorite 0
comment 0
Under the seats there are HVAC vents that are just begging for goldfish and jellybeans to get tossed into them, never to be seen again. Print these and place them over the vents to retain airflow but not the ability to lose small snacks in them. They should friction fit ok, use 1/4" 3M VHB tape on the edges if you want a more secure attachment.
Topics: thingiverse, vent, stl, tesla_model_y, tesla, Automotive
7
7.0
movies
eye 7
favorite 0
comment 0
2021 Tesla Model Y Dual Motor Regular Car Reviews
Topic: 2021 Tesla Model Y Dual Motor Regular Car Reviews
1
1.0
Nov 8, 2021
11/21
by
Nicholas Nguyen (osunick)
data
eye 1
favorite 0
comment 0
I scanned this part from a Tesla Model 3 to make it easier to design mounts that fit on the steering column (we are designing an android app to act as an instrument cluster for your phone) so providing this cleaned up scan so you can use it to design your stuff. Import into your favorite design tool, then subtract the object from the mount that you’re designing and you’ll have a perfect match.
Topics: stl, tesla_model_3, Tesla_model_Y, thingiverse, Automotive
2
2.0
Jan 8, 2021
01/21
by
C. Sin (csin)
data
eye 2
favorite 0
comment 0
To my disappointment the iPhone Pro Max does not charge with the factory wireless charger. For this reason i've created a charging "dock bar" that allows the pro max to sit lowered by 10mm so that the charging coils can better align. The dockbar ledge is also deeper and can accept cases up to 13mm thick (1/2" inch), so far i've tested the iPhone 12 Pro Max, Otterbox Symmetry and the Ringke Onyx cases with no issues. Ideally, this should be printed in PETG, ABS, or any filament...
Topics: Tesla_model_Y, stl, Automotive, model_y, thingiverse, Tesla
0
0.0
Apr 19, 2022
04/22
by
Nigel Rudgewick-Brown (Nigelrb)
data
eye 0
favorite 0
comment 0
A simple key fob to unlock your Tesla. Uses the RFID from a Tesla Key Card. After dissolving the key card in acetone, carefully remove the chip and coil and stick into the fob with double sided tape. The lid will push fit to close the fob.
Topics: thingiverse, Automotive, Tesla_model_Y, tesla_model_3, stl
1
1.0
Nov 8, 2021
11/21
by
Matt Kri (darkcrow101)
data
eye 1
favorite 0
comment 0
After picking up my Model Y I noticed that going over bumps or uneven roads there was a significant "boominess" in the cabin that created a low frequency, infrasonic sound that was quite irritating. After some research, I realized this problem is systemic to a lot of Model S and Model Y models because of slight movement of the rear hatch. After calibrating my rubber hatch stops with the "envelope trick" (https://www.youtube.com/watch?v=Z4fYt06sfN0), it didn't remove the...
Topics: model y, stl, tesla model y, Tesla, thingiverse, Parts
2
2.0
Jun 10, 2021
06/21
by
Robert Cole (daedalas1981)
data
eye 2
favorite 0
comment 0
The horrible BC EV OK Sticker aka OKAY Decal. Save your paint, and use magnets. In my example, I'm using the frame on a 2021 Tesla Model Y Trailer Hitch Cover. I printed both the sticker base, and the outer frame. However, you can just print the sticker base. Supports are probably a good idea on the outer frame. On the Tesla Hitch Cover, I superglued two magnets (taking note of South and North poles of the magnets) to the back of the cover. Note, I also used a exacto knife on the back of the...
Topics: Automotive, Tesla, EV_Decal, thingiverse, decal, Tesla_model_Y, stl
0
0.0
Apr 19, 2022
04/22
by
Jacky Huang (okk2000)
data
eye 0
favorite 0
comment 0
for tesla model3/Y, there is no dash board, we can use a magesafe mount instead of it. with a camera, it can use as a AR navigation devices. iphone 12 and up can easily use. android with magnet ring can aslo compatible with this mount. my device is iphone XR.
Topics: thingiverse, Tesla_model_Y, Tesla, tesla_model_3, Other, stl
1
1.0
Jan 19, 2022
01/22
by
Alex Krush (alexkrush)
data
eye 1
favorite 0
comment 0
Tesla key card holder for center console of Model 3 and Model Y Note: It doesn't look too great in the photo because I tried sanding it and it dulled out the black
Topics: tesla_model_y, thingiverse, Automotive, tesla_model_3, stl, tesla
2
2.0
Mar 16, 2021
03/21
by
Thomas 1000 (Thomas1000)
data
eye 2
favorite 0
comment 0
I found the fact anoying, that all the little things i keep in the cup-holder-storage are untidy and get in the way, when I try to put in a bottle. So I used the source-design, kept only the middle-part and drew some separators. As we're in germany currently in need of a 1-Euro-Coin or token to use it on shopping-carts, I included a small compartment to store and easy-access a single coin. The very small reading-glass I use and some pens have a new home now as well... As far as I know the...
Topics: Tesla_model_Y, thingiverse, Tesla, Automotive, tesla_model_3, stl
1
1.0
Apr 19, 2022
04/22
by
benny wo (bennywo)
data
eye 1
favorite 0
comment 0
Model 3&Y Air Perfume Holder
Topics: Parts, thingiverse, Tesla_model_Y, Tesla, tesla_model_3, stl
1
1.0
Dec 1, 2021
12/21
by
Nicholas Nguyen (osunick)
data
eye 1
favorite 0
comment 0
This is a watertight surface you can use to design accessories that fit on the curved upper surface of the steering column. The geometry is surprisingly complex so I found this helpful, and I hope you do too.
Topics: thingiverse, tesla_model_3, tesla_model_y, Automotive, stl, tesla
Topics: Youtube, video, Autos & Vehicles, tesla, tesla model y, new model y, model y, model y 2022, new...
2
2.0
Apr 4, 2021
04/21
by
Benoit Lefebvre (moxBenoit)
data
eye 2
favorite 0
comment 0
I was looking for the perfect iPhone mount for my Tesla Model 3. Unfortunately I could not find anything that I was satisfied with so I decided to take some measurements and build my own.
Topics: thingiverse, Tesla_model_Y, iphone, stl, holder, Automotive, tesla_model_3
1
1.0
Jan 18, 2022
01/22
by
Alex Krush (alexkrush)
data
eye 1
favorite 0
comment 0
Hooks that fit between the rear panels that can be used for a cargo net or other storage
Topics: model y, Cargo, thingiverse, Automotive, Tesla model y, stl, Tesla, hook
1
1.0
Aug 8, 2021
08/21
by
Curtis Paris (hiopilot)
data
eye 1
favorite 0
comment 0
In the Model Y, there wasn't a good place to store the J1772 adapter. This design uses the charger emergency release compartment of the M3/MY as a place to clip in a holder. This design adds a completely form fitting for the Tesla HPWC style connector. I've included the OpenSCAD model I built for the Tesla Holder portion. Finally, there is a Blender file that has all the pieces put together in case you need to adjust a cllp or re-use the holder design. ## Installation Instructions To insert the...
Topics: Automotive, thingiverse, stl, j1772, tesla_model_3, Tesla_model_Y, Tesla
2
2.0
Mar 19, 2021
03/21
by
Hilman Chung (chilman408)
data
eye 2
favorite 0
comment 0
Created an expanded cover for the Taptes Tesla Model 3 Usb Hub to fit a Raspberry Pi 4 inside. This is the hub: https://www.taptes.com/products/taptes-model-3-usb-hub-designed-for-tesla-model-3-dashcam-sentry-mode-model-3-hub A couple of the photos I added black flocking on it to match the interior look of the car and another couple of photos are just of the bare 3D printed part. IMPORTANT - 1. You will need to purchase 4x 5mm by 2mm round magnets (you probably can't buy just 4x because they...
Topics: Tesla_model_Y, Automotive, thingiverse, tesla_model_3, Taptes, Tesla, stl
2
2.0
Jun 11, 2021
06/21
by
Rick Rollins (gajtguy)
data
eye 2
favorite 0
comment 0
I remixed this bracket so the phone could be higher and further to the left. This allow for a portrait or landscape mode. Since the phone was 'way out there', it kept falling off the screen so I added a passenger side bracket. The two brackets fit together with one single screw and there are NO attachment methods or modifications to the tesla screen. It just slips on and you snug up the screw to prevent vibrations. The weak spot is the ball arm as it gets all of the weight from the phone as...
Topics: Automotive, cellphone_holder, thingiverse, tesla_model_3, Tesla_model_Y, stl
Topics: Youtube, video, Autos & Vehicles, Tesla, tesla model y, model y, model y tesla, tesla model y...
1
1.0
Dec 14, 2021
12/21
by
EveryAmp Inc. (EveryAmp)
data
eye 1
favorite 0
comment 0
Our [Tesla Model Y hitch cover removal tools](https://everyamp.com/shop/model-y-hitch-cover-removal-tools/) are now available to make at home. You already have a printer and plastic, so let's skip the environmental impact of shipping! You may have noticed that the plastic hitch cover on the Model Y is kind of a pain to remove. It's loaded with plastic clips all around and [universal pry...
Topics: Hitch Cover, Hand Tools, stl, Tesla, thingiverse, Model Y, Tesla Model Y
1
1.0
Jan 18, 2022
01/22
by
Shane Jackson (Printer2261)
data
eye 1
favorite 0
comment 0
I made a supportless model of the center console tray. Fits 2021+ Tesla Model 3 and Model Y. There are two files: one has the Tesla logo and one is blank. Please consider sharing a cup of coffee: bit.ly/3Fs50W9
Topics: thingiverse, Automotive, tesla_model_3, stl, tesla_motors, Tesla_model_Y, Tesla
1
1.0
Apr 20, 2022
04/22
by
Rick Steinwand (TownDrunk)
data
eye 1
favorite 0
comment 0
Inspired by a post in the North Dakota Tesla Facebook Group by Arnie Kopp, who uses Popsicle sticks to keep the door handles of his Tesla Model 3 from freezing after a winter carwash. Although he places the sticks vertically, my version is intended to be placed inline with the door handle (horizontal). After a car wash, ideally you'd wipe everything down with a towel or microfiber cloth. Then, if you're careful, you can slip the stop stick under the door handle without triggering a door open...
Topics: thingiverse, Automotive, Tesla, tesla_model_3, Tesla_model_Y, stl, model y
2
2.0
Oct 15, 2021
10/21
by
Denis Wright (ViRepz)
data
eye 2
favorite 0
comment 0
I created this from another item. I have nice covers on the plastic part behind the front seats, so I didn't want any clip or anything that can damage the cover. This item can just be tucked into the plastic part and its long enough and strong enough to hold a tablet or phone and not flip out. Used with any cheap tablet / phone holder, that accepts a ball socket
Topics: Automotive, thingiverse, stl, ball socket, Tesla, tesla_model_3, Tesla_model_Y
2
2.0
Jun 11, 2021
06/21
by
Ken Anderson (anderkh)
data
eye 2
favorite 0
comment 0
The built in charger on the Model Y and the latest Model 3's is wonderful, but the coil is in a fixed location and smaller phones don't charge properly. This booster fits right into the slot at the bottom of the charger, with the left slot working well for an iPhone 12 Mini, and the right slot working well for most other phones. Printed on a Prusa Mk 2.5S. Re-orient on the bed so that the front is face down for a no fuss print.
Topics: Phone_Stand, Mobile Phone, thingiverse, tesla_model_3, Tesla_model_Y, stl
2
2.0
Oct 15, 2021
10/21
by
Nicholas Nguyen (osunick)
data
eye 2
favorite 0
comment 0
The charging coil on the Samsung Galaxy Z Flip 3 is positioned too low to charge in the Tesla Model Y (2021 refresh) wireless charging console. This increases the height of the phone just enough to engage wireless charging. Unfortunately this does not leave room for the phone to unfold but there is no better solution that I could find other than using a cord.
Topics: Automotive, thingiverse, stl, charging, model_y, samsung, tesla, Tesla_model_Y, galaxy
2
2.0
Oct 26, 2021
10/21
by
Zen Magnets (zenmagnets)
data
eye 2
favorite 0
comment 0
Sharing this simple 0.4G force turn meter to assist your tesla FSD driving test. Stick this on your rear view mirror housing, and the ball will fall towards center if your turning forces are within 0.4 G. From my experience, the ball will bounce around a bit if you near 0.3G. You will need a 5mm ball bearing, and a full size command strip for attachment. This piece is designed for SLA Laser/LCD printing without internal supports. Not sure how you'd deal with supports with an FDM printer. The...
Topics: Tesla_model_Y, force_meter, Automotive, gforce, tesla_model_3, stl, thingiverse, Tesla
3
3.0
May 1, 2021
05/21
by
Amruth Pabba (legoswag123)
data
eye 3
favorite 0
comment 0
Stacked both on top of each other and printed. Between files, changed the filament to get the dual color effect. Remixed the original file, modified the dimensions just a bit so details will be printed a bit more clear.
Topics: stl, Automotive, Model Y, Tesla, Tesla Model Y, Keychain, Tesla Model 3, thingiverse, Model 3
1
1.0
Nov 30, 2021
11/21
by
Shane Jackson (Printer2261)
data
eye 1
favorite 0
comment 0
This is a remix I created that removed the inner dividers for the center console tray below the arm rest. There are two files: one has the Tesla logo and one is blank. Please consider sharing a cup of coffee: bit.ly/3Fs50W9
Topics: tray, thingiverse, Arm_Rest, tesla_model_3, Automotive, stl, center_console, Tesla_model_Y, tesla
2
2.0
May 1, 2021
05/21
by
William Hardy (billjr212)
data
eye 2
favorite 0
comment 0
This is a remix of another charging cradle. I modified the "roof" extension so it tapers upward to hold the cable. I flipped the screw holes to be stacked so they can hit a single wall stud and tapered so you can use tapered head screws and have them sit relatively flush. It could use some more work to smooth it out but it should be a good start for someone more skilled in 3D print software than me while also having a compact footprint to fit on even small printers. Printed with...
Topics: stl, Tesla_model_Y, Automotive, Tesla_Model_S, tesla_model_3, Tesla, Tesla_Model_X, thingiverse
Topics: Youtube, video, Autos & Vehicles, Tesla, Model Y, Tesla Model Y, Elon musk, Long Range,...
Topics: Youtube, video, Autos & Vehicles, Tesla, Model Y, Tesla Model Y, Elon musk, Long Range,...
3
3.0
Jun 11, 2021
06/21
by
Mal K (Powerman3d)
data
eye 3
favorite 0
comment 0
Printed at 200C, No Supports. Two sizes. 100% and 80%. The 80% is about 43mm tall.
Topics: Tesla, Tesla_Model_X, elon_musk, Keychains, thingiverse, Tesla_Model_S, tesla_model_3,...
1
1.0
Jan 18, 2022
01/22
by
Jose Gil (SodaPopin5ki)
data
eye 1
favorite 0
comment 0
The Model 3 and Model Y no longer come with the rear cubby container under the arm rest. I included some internal slots for a Samsung T5 SSD, coins, and card holders. Card wallets can be found here: https://www.thingiverse.com/thing:3020290 The 1 piece version will need to be printed with supports. Alternatively, you can print the bottom and top version (top is inverted) without supports, and glue them together. I haven't tested the fit myself, though. I also have the internal bits as a...
Topics: model y, thingiverse, tesla model 3, box, cubby, tesla model y, rear, Automotive, stl, storage,...
3
3.0
Jan 5, 2021
01/21
by
Jordan Merrick (jordanmerrick)
data
eye 3
favorite 0
comment 0
Tesla charging cable holder. This is a remix that adds some features and makes it more functional for outdoor use. This holder covers the back to better protect from rain and a sloped cover for a little extra protection from the elements. There's also a Tesla logo above the dock, and the top and bottom of the holder are rounded to reduce sharp edges.
Topics: Tesla_Model_S, stl, Tesla_model_Y, Automotive, tesla_model_3, Charging_dock, Tesla_Model_X,...
Topics: Youtube, video, Autos & Vehicles, tesla, tesla model y, model y, elon musk, model y tesla,...
Topics: Youtube, video, Autos & Vehicles, Model y, model y made in germany, model y made in germany...
2
2.0
Mar 13, 2021
03/21
by
Guillaume Perras (ChunkAhoy)
data
eye 2
favorite 0
comment 0
Wall mount hooks for Tesla Aero Wheels Caps. Use a 3M Command Strip to secure the hooks without damaging the walls. Enjoy! ETH: 0x40a6a19c00e0c9cd9dc43e4a3d094983653a3152 BTC: 1KoUkp6TpBYCKHa8LoYD1EiEiDW578ifbV
Topics: Tesla, thingiverse, cap, Tesla_model_Y, Automotive, wheels, Cover, Aero_wheel, wall_mount,...
Topics: Youtube, video, Autos & Vehicles, carwow, mat watson, car review, new car review, car review...
Topics: Youtube, video, Autos & Vehicles, Tesla, EV, NEV, BEV, tesla update, tesla model 3 update,...
Topics: Youtube, video, Education, Video Essay, Environment, Climate Change, Our Changing Climate, OCC,...
2
2.0
May 1, 2021
05/21
by
Vincent Ferchaud (HoM3r17)
data
eye 2
favorite 0
comment 0
EN : This is remixed from this Type 2 plug holder from m1n1m https://www.thingiverse.com/thing:2349168 and this cable & plug holder from andrebon https://www.thingiverse.com/thing:4776205. I wanted this to print in one piece and without any supports for my Renault Zoé, as no F3D files were available from both sources, I had to work from the STL mesh so it may be a bit messy if you need to modify it, but for now it seems to be an interesting design and will be compatible with every vehicle...
Topics: Automotive, thingiverse, tesla_model_3, cable_management, Electric_Vehicle, zoe, renault_zoe,...
Topics: Youtube, video, Education, Elon Musk, Musk, Elon, Tesla, SpaceX, The Boring Company, Business, Jeff...
1,888
1.9K
Sep 10, 2020
09/20
by
Martin Archambault
audio
eye 1,888
favorite 0
comment 0
Silence on roule Épisode 86
Topic: Tesla Model Y
0
0.0
May 18, 2022
05/22
by
EV Stop
movies
eye 0
favorite 0
comment 0
Topics: Youtube, video, Autos & Vehicles, EV, EV News, Electric Vehicle, electric car, electric cars,...
