6
6.0
Jan 21, 2021
01/21
by
Matt L (Matt19888)
data
eye 6
favorite 0
comment 0
Hvac vent for 1/2 bath. My half bath is about 20 sq ft so a 6x3 grill should be sufficient. Designed for use with a 4in duct. grill is meant to be press fit thru 1/2in drywall
Topics: hvac grill, hvac, hvac vent, vent grill, 6x3 vent, DIY, thingiverse, vent, 4in vent, stl
2
2.0
Mar 12, 2021
03/21
by
(offtherails2010)
data
eye 2
favorite 0
comment 0
This is a case side vent im needing that i made which im about to use on some Quick~&~Dirty UV Curing Boxes, lol Yup, the Boxes are Cardboard for now, lol Enjoy the photo's lol & NOT apologising for the messy state of my work bench in 1 of the photo's lol The Nuts and Bolts have been Reduced in scale to fit the holes but as this is literally hot off the press, consider the nuts and screws to be non-tested as of yet, will update soon :) Major Thanks to mike_mattala for creating the bolt...
Topics: DIY, thingiverse, Case Side Vent, Ventilation, stl, Side Vent, Vent, Case Vent
To All Who visit us: Please utilize the email function on this website! We love to hear feedback no matter how good or bad. Even if you just say "hi" and where you are from: city,state. Revised:January 2004 2003 is officially over! VENT is currently holding auditions for vocals and rhythm/lead guitar. We ask that you have atleast 7 yrs real experience. We have some label contacts and national promotional backing. Our 6 song cd "MY World" was finished in April of 2002 with...
Topic: vent
12
12
Dec 18, 2020
12/20
by
Center for Accessible Technology in Sign
movies
eye 12
favorite 0
comment 0
ASL vocabulary
Topic: vent
13
13
Dec 18, 2020
12/20
by
Center for Accessible Technology in Sign
movies
eye 13
favorite 0
comment 0
ASL vocabulary
Topic: vent
5
5.0
Apr 7, 2021
04/21
by
Monkeysailor (monkeysailor)
data
eye 5
favorite 0
comment 0
This is a replacement inner support for a 100mm (4 inch) metal mushroom vent, as found on the roof of many boats, caravans, and sheds.
Topics: ceiling_vent, narrowboat, Household, stl, mushroom_vent, roof_vent, thingiverse, RV, boat,...
5
5.0
Jan 21, 2021
01/21
by
Matt L (Matt19888)
data
eye 5
favorite 0
comment 0
exterior vent for abs/laser. I didnt want to add a dryer style vent to a bedroom so heres my alternative. This should be fine for a standard 120mm fan but anything more than that might need more airflow. I plan on adding a grill for this later. Made in two pieces for easier printing.
Topics: enclosure vent, 3D Printer Accessories, thingiverse, abs vent, exterior vent, 4in vent, stl, laser
0
0.0
Apr 20, 2022
04/22
by
Bruin Wizard (ChuckAckerman)
data
eye 0
favorite 0
comment 0
This is yet another small vent to be used to allow power supply boxes to breathe. My particular use is to install it in a Harbor Freight ammo box to cool the 12v power supply for pixel Christmas lights. The diameter of the threads is just under 1" so a 1" hole should work well. I printed the washer in TPU which will compress and seal the opening. The top of the vent is tilted away from the box to aid in rain runoff. There are no supports needed and printing of all of the parts should...
Topics: thingiverse, F16V3, Ammo box vent, Pixel, Electronics, Power supply, Air vent, Vent, stl, Small vent
1
1.0
Jan 18, 2022
01/22
by
Marc Frentz (Critterninja)
data
eye 1
favorite 0
comment 0
This is a vent plug for face masks that come with vent holes. This is used to prevent exhale particles from exiting through the vents and infecting others with your potential illness. I'm not sure if this will qualify your mask in areas where masks with vents are not approved,, but if it does, here you go :) I also included a blank stl so you can put your own image on it if you don't like the biohazard symbol. I cut the img I used into the top by 1.5mm, which looked like a good depth. The total...
Topics: vent_plug, mask_vent_plug, Household, thingiverse, Facemask, Vent_Cover, stl
2
2.0
Jun 21, 2021
06/21
by
Stefanie Davis (stefi01)
data
eye 2
favorite 0
comment 0
designed for the end of pipes
Topics: Outdoor & Garden, grill, pipe vent grill, thingiverse, stl, fan_grill, vent grill, air vent,...
6
6.0
Jun 26, 2021
06/21
by
Rigo, Juan, 19.-
texts
eye 6
favorite 0
comment 0
1 volume (143 pages) : 20 cm
Topics: Vents -- Méditerranée (mer), vent -- Méditerranée (bassin), vent
3
3.0
Mar 26, 2021
03/21
by
Martin MM (mato4mato)
data
eye 3
favorite 0
comment 0
Worked with printer Ender 3 and hole with 93mm in diameter 0,4mm extruder 0,2mm layer height Infill 20% but shouldn´t matter probably better to flip upside down in printing software
Topics: stl, Vent_Cover, thingiverse, cover, Replacement Parts, Vent, Slot_Air_Vent_Cover
Vent is an explosive-sounding, modern, heavy rock band with a colorful display of style. The band is comprised of two of Ilinois' most established acts: KRANKINSTEIN and ABNORMAL. The result=VENT-a well-oiled songwriting machine. Paul Menke (vocals), Bob Molton (guitars), Pete Ramsey (bass), and Steve Baker (drums) make up what many have said will be the future supergroup. With the band's crafty songwriting approach, along with much experience as recording artists, VENT seized the opportunity...
Topic: Vent Head
3
3.0
Mar 25, 2021
03/21
by
(JTsVerse)
data
eye 3
favorite 0
comment 0
A friend of mine came to me with a challenge. He broke the PTO case vent on his 1993 Case 395 tractor and can't seem to find one. So into Fusion 360 I went to replicate it. I have included two versions for you to choose from. A glue together style like the original part, and a thread together style. I only printed the glue style so the threaded style is untested, though I expect no issues. When using the glue together style apply a little glue in the mating groove as well as around the outside...
Topics: stl, thingiverse, Case, PTO Vent, Tractor, 395, Baffled, Vent, Automotive, Axle Vent
3
3.0
Apr 20, 2021
04/21
by
Jimmy James (jimmyjames008)
data
eye 3
favorite 0
comment 0
Small 1-1/2" vent with a drip proof cover. I'm using it to allow air flow through a plastic container in the bed of my truck.
Topics: thingiverse, cover, stl, Vent_Cover, Vent, Other
5
5.0
Jan 21, 2021
01/21
by
Darrell Troupe Jr. (dtroupe2)
data
eye 5
favorite 0
comment 0
A random part I made while practicing. it prints well vent side down with or without support.
Topics: Vent, thingiverse, Ventilation, Parts, stl, air_vent
23 p. : 23 cm
Topics: Windbreaks, shelterbelts, etc, Brise-vent, Brise vent
5
5.0
Jan 21, 2021
01/21
by
Paweł Anonim (pawlo444444)
data
eye 5
favorite 0
comment 0
This is my first design so it's not perfect but still useable. This is plug for 35mm vent holes in door.
Topics: door_vent, vent_plug, thingiverse, Household, door, plug, 35mm, screw, hole_plug, vent,...
2
2.0
Mar 31, 2021
03/21
by
Nathan everaert (Poicly)
data
eye 2
favorite 0
comment 0
this is the small white spacer bewteen the vent and the body of the amplifier
Topics: macro tech vent, macro tech, space, air vent, thingiverse, spacer, Parts, air vent spacer, Macro,...
1
1.0
Jan 19, 2022
01/22
by
Argent Cove (argentcove)
data
eye 1
favorite 0
comment 0
Forced Air Vent Deflector w/extension Super glue them together after printing. This way you can print all parts without the need for any supports. I used some cheap [stick-on magnets](https://www.amazon.com/gp/product/B0104SATQ2/ref=as_li_tl?ie=UTF8&tag=scribbleweed-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B0104SATQ2&linkId=eb0b2926767fdf04083f9ee77d8ad1df). But it might be nicer with some [magnet...
Topics: air_vent, Household, thingiverse, Vent, air, stl, deflector
4
4.0
Mar 15, 2021
03/21
by
Michael Bourque (michaelbourque)
data
eye 4
favorite 0
comment 0
A man I never met contacted me on Facebook. He lives in a cottage in Ontario. He explained that everyday he has to lug a large container of water to his cottage. His container has two caps and one of them broke. He said that the water would leak out all over his pant legs during the trip. So he sent me a few sketches and I designed it for him over the course of a few hours. I sent him the 3d print file and then he printed it in a 1-1/2 hour. The hardest part was the threads as they are very...
Topics: cap, water, vent_cap, Parts, thingiverse, lid, jug, stl, Vent, air_vent_cap
2
2.0
Jan 5, 2021
01/21
by
damien davis (demiduce)
data
eye 2
favorite 0
comment 0
This is a replacement vent cap that runs to the outside of the house. this was made to go around a 4 inch vent pipe. The hole in the cap is about 3.25 inches. There are 2 print files one with a gap on top and one without. The original file was made specifically for my situation. The siding was too close to the pipe and there wasn't enough space to have plastic run in between. I just ran silicone adhesive around the edges. The second file is with no gap. I made the print out of PLA but then the...
Topics: dryer_vent, Dryer, stl, Vent, thingiverse, Replacement Parts
6
6.0
Jan 7, 2021
01/21
by
Phillip DiCarlo (Italiandogs)
data
eye 6
favorite 0
comment 0
No one seems to make this, so i made a side exhaust for my hvac air vent. See Misc notes on printing. Let's talk about it: https://www.reddit.com/r/functionalprint/comments/jxw53b/printed_a_side_exhaust_vent_cover_because_none/
Topics: hvac_vent, stl, Vent, HVAC, thingiverse, DIY, hood
1
1.0
Nov 30, 2021
11/21
by
Stephen Miles (Stevie135s)
data
eye 1
favorite 0
comment 0
This is a mounting for a 9" x 3" Open Close adjustable air vent hit and miss wall system
Topics: air vent, adjustable air vent, thingiverse, stl, Household
3
3.0
Jun 6, 2021
06/21
by
Jason Hamilton (jason955)
data
eye 3
favorite 0
comment 0
This part connects to the rear of my portable AC unit by LG model LP1017WSR. This converts the output to a 4" duct and routes the duct at a 90 degree angle to the unit so it can be placed closer to the wall. I split the model in half, printed as 2 separate pieces and glued them together. Both the whole model and the split models are included. The original duct is 6" so I still need to test this to make sure the AC unit functions well. The area cross section of the 4" duct is ~1/3...
Topics: Vent_adapter, Air_Conditioner, thingiverse, stl, Household, Vent
6
6.0
Jan 16, 2021
01/21
by
Michael Heacock (Diymik)
data
eye 6
favorite 0
comment 0
A simple vent i made to let air flow out, to keep stuff inside like the VTX, ESC and flight controller cool. This is in my Hobbyking sky eye which has 8mm thick wall where i installed it.
Topics: R/C Vehicles, thingiverse, vent, stl, air vent
9
9.0
Apr 27, 2021
04/21
by
Keith Zettler (MooseAMoose)
data
eye 9
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5LuikJ3lbNp replacement blades for standard issue pvc dryer vent
Topics: dryer_vent, thingiverse, Dryer, stl, 3D Printing, Vent
12
12
Jun 27, 2017
06/17
by
Pastel Opal
movies
eye 12
favorite 0
comment 0
Full Picture: /redirect?q=http%3A%2F%2Fpastelopal.deviantart.com%2Fgallery%2F%3Fcatpath%3D%2F&redir_token=Lf5N3TTSO9GN2Qy9iESDoGjhand8MTQ5ODYxMjY3OEAxNDk4NTI2Mjc4 Source: https://www.youtube.com/watch?v=9qg80fAkT20 Uploader: Pastel Opal Upload date: 2017-06-26
Topics: Youtube, video, Film & Animation, speedpaint, speeddraw, speed draw, vent, vent art, vent...
11
11
Jun 10, 2021
06/21
by
Bob Doran (BobD1001)
data
eye 11
favorite 0
comment 0
This is an Airbox Vent that you can print at home to increase airflow to your motor. It will accommodate 5/8 thick air filter foam. Cut 1 inch circles out of the foam sheet for a snug fit in the 0.875" barrel, oil them, and pop them into place. They are designed to fit in 1" holes drilled into your airbox lid or sides. The fit should be snug to prevent particulate from making it past these mini-filters. I also suggest adding a thin bead of silicone to the mating flange to ensure a...
Topics: Automotive, air box vent, thingiverse, airbox vent, stl
0
0.0
web
eye 0
favorite 0
comment 0
Vent smp Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Vent smp Wiki, vent_smpfandomcom
1
1.0
Jan 18, 2022
01/22
by
Neil Doruff (GameOverDude)
data
eye 1
favorite 0
comment 0
Wanted a floor vent that didn't easily get moved away by my Rosie, my Roomba Vacuum. This design fits around an 11 inch floor vent plate [Useful Crap #018]
Topics: useful_crap, thingiverse, Decor, Vent, stl, floor_vent
2
2.0
Mar 18, 2021
03/21
by
Conor (ronoc29)
data
eye 2
favorite 0
comment 0
I needed a way to redirect the columns of cool air coming out of the vents from my SpacePak AC unit. The design is a simple 90 degree bend meant to fit about one (1) inch into the OEM vent hole.
Topics: HVAC, Household, hvac_vent, Spacepak, stl, thingiverse, Vent
5
5.0
Jun 11, 2021
06/21
by
(igor031)
data
eye 5
favorite 0
comment 0
Summary Attwood Boat Flush Louvered Air Vent 1425-5 | Carver 15 1/4 x 2 Inch Part Number: 8701369 Overall Dimensions: 17 9/16" L x 2 3/4" W Cutout Dimensions: 15 1/4" L x 2" W
Topics: attwood, Vent_Cover, thingiverse, air_vent, boat, stl
3
3.0
Jan 6, 2021
01/21
by
Muhammad Islam (muzahid)
data
eye 3
favorite 0
comment 0
My Washer/Dryer vent had a missing flap and I couldn't find any replacement flap in the market. The replacement cover costs $18 while a replacement flap would cost less than a dollar to print. The size of the vent pipe was 6". The flap size is 6.25x2.25" or 165x59mm.
Topics: 6.25x2.25in vent flap, Dryer, stl, Dryer Flap, Vent, Washer Flap, 165x59mm vent flap, thingiverse,...
2
2.0
Jan 11, 2021
01/21
by
FIlipe Santos (FSSantos)
data
eye 2
favorite 0
comment 0
With the everyday use of masks becoming a thing, I found myself trying to take it off and put it down, in the places where I'm alone. But where do you put it down? The exterior counts as contaminated.. Placing it in the rearview mirror is weird and blocks the view.. So this part comes into existance :) I made a quick search and found nothing similar, so here it is.
Topics: thingiverse, Automotive, stl, car vent, mask, car, vent clip
2
2.0
Apr 4, 2021
04/21
by
Mike Ellis (pr3sidentspence)
data
eye 2
favorite 0
comment 0
My wife went back to school and she needed a place to study so I made her an office in the cupboard under the stairs (literally). The problem was it was cold in there but there was an HVAC line pipe running through it. Cut a hole in your vent the size of the outside of the flange (57mm or 2 1/4"), insert the flange and screw it in place. Then add the control (the tolerances are TIGHT, so you might need to add a little lubrication). Turn one way and you get a little hot/cold air; turn the...
Topics: thingiverse, hvac_vent, Household, HVAC, stl, Vent, vampire, Ventilation
4
4.0
Apr 8, 2021
04/21
by
Dan Fruzzetti (danfruzzetti)
data
eye 4
favorite 0
comment 0
Somehow I lost one of the levers that allows my vents to open and close. So if you spun the little "on / off" knob below the air vent, this wouldn't do anything. Today I decided to take another one out so I could copy the missing piece. Attached is my copy. It took about one hour with millimeter ruler, digital caliper, and paper protractor to get it just right. This will enable you to open and close your air vents if you have the knobs but not the little levers that grab the vents. If...
Topics: toyota, Automotive, priuschat, AC, stl, lever, prius, air_vent, thingiverse, vent_lever, air, vent
8
8.0
Mar 10, 2021
03/21
by
Hikmet AKIN (Xikmet)
data
eye 8
favorite 0
comment 0
It works well. I make this design for Joyetech eGo AIO D22, At the bottom of the container fits the device and holding 3cm, So that the device is nicely placed. It's easy to be placed on the upper part of the open-mouthed.
Topics: e-cigarette, stl, thingiverse, Vent, Automotive, holder, vent_holder
2
2.0
Jan 4, 2021
01/21
by
Alex VV (iq911506)
data
eye 2
favorite 0
comment 0
This is a snap in clip for the shown HVAC register vents to lock the register in the desired position and prevent it from falling to the closed position. This design has 13 notches that the damper can be set and held into, however from my experience most of the registers only will allow adjustment to about half of them.
Topics: hvac_vent, stl, Register, Vent, Ventilation, HVAC, Household, thingiverse
8
8.0
Apr 5, 2021
04/21
by
Andy (ASD)
data
eye 8
favorite 0
comment 0
-Replacement for the standard RV vent fan blade. -Be careful, this could be dangerous in application and cause personal injury. I recommend covering with a screen to prevent injury. 9/29/13 UPDATE: Had a chance to install. I would recommend making the shaft hole .005 in. smaller. I used ABS glue and I feel it is secure. I would say this fan blade works better than OEM.
Topics: thingiverse, BLADE, RV_VENT, stl, VENT_FAN, Automotive, RV
9
9.0
Jan 9, 2021
01/21
by
Gary Pien (Tarrant1701)
data
eye 9
favorite 0
comment 0
The dryer exhaust port outside my house has 3 flaps which blow open when the dryer is running and close when the air stops. One of the flaps recently broke, necessitating a replacement. Approximate dimensions: Body of flap: 104mm (width) x 32mm (height) x 1.5mm (thickness) Retention tabs: 2.5mm (diameter) x 4.3mm (length) Material considerations: In the USA, dryer exhaust temperatures are regulated to NOT exceed 180°F (82°C). Since it will also be used outdoors, sun/heat are also factors to...
Topics: thingiverse, Vent, stl, clothes_dryer, dryer_vent, Replacement Parts
3
3.0
Jun 10, 2021
06/21
by
Keith Ong (MrSonicKeith)
data
eye 3
favorite 0
comment 0
These clips either break or get weak over time and does not hold up the vent cover on the ceiling. Quick to print to replace failing clips. Click like if you are downloading or printing. Love the feedback.
Topics: clip, vent, aircon, thingiverse, vent_clip, Replacement Parts, stl
2
2.0
Jan 5, 2021
01/21
by
David Mikulik (dmikulik)
data
eye 2
favorite 0
comment 0
Customizable outdoor vent cover
Topics: stl, Vent, Vent_Cover, thingiverse, fan_cover, Outdoor & Garden
6
6.0
Apr 18, 2021
04/21
by
ben lipsey (varind)
data
eye 6
favorite 0
comment 0
A replacement flap for my dryer vent. This is version 2 as the first one warped in the hot summer sun. This one has longer tabs that will hopefully hold even if there is a bit of warping.
Topics: flap, dryer, Replacement Parts, dryer_vent, thingiverse, stl, vent
1
1.0
Apr 24, 2021
04/21
by
Austin Balcaen (balcs11)
data
eye 1
favorite 0
comment 0
Replication of a vent cover used on a Hatteras motor yacht. Printed with the slanted sections touching the build plate using support
Topics: Replacement Parts, Vent, stl, thingiverse, Vent_Cover, hatteras, cover
2
2.0
Mar 16, 2021
03/21
by
fred freddy (freddyfred)
data
eye 2
favorite 0
comment 0
wanted to mount under my work bench to vacuum up all the wood shavings.
Topics: thingiverse, workshop, DIY, shopvac vent, Vent, stl, ShopVac, shower
7
7.0
Jan 17, 2021
01/21
by
Walter Hsiao (walter)
data
eye 7
favorite 0
comment 0
Replacement air vent plug (the original version is the black one in the pictures). The new one was designed to be less uncomfortable to stand on. An o-ring is required seal the vent properly.
Topics: surfboard, thingiverse, Sport & Outdoors, vent, SUP, air vent, stl
3
3.0
Apr 13, 2021
04/21
by
Ed ward (Emancipator)
data
eye 3
favorite 0
comment 0
This adapts an 80mm fan to a 2 inch hole. This is the final piece used to vent my Da Vinci printer. Why a 2 inch hole you ask? - That's the size of the hole saw I have. Why vent abs fumes? After reading the following, I thought it a good idea: http://www.sciencedirect.com/science/article/pii/S1352231013005086 http://www.mindfully.org/Health/2004/Nonoparticles-On-Brain2004.htm I used the Davinci 80mm fan exhaust by philharlow for the piece that attached the vent hose to the printer. Thanks,...
Topics: thingiverse, 3D Printer Accessories, 80mm_adapter, 3d_printer_vent, stl, vent, printer_vent,...
2
2.0
Apr 4, 2021
04/21
by
R K (Eleventy3)
data
eye 2
favorite 0
comment 0
Designed this as I couldn't get one easily at the moment. Works a treat.
Topics: thingiverse, External vent, Replacement Parts, stl, Tumble Dryer Vent
2
2.0
Jan 3, 2021
01/21
by
MacGyver (MacGyver)
data
eye 2
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/4y4YQfzFAd3
Topics: cover, 3D Printing, stl, honeycomb, heater, vent, cover, heater vent, thingiverse, air...
