6
6.0
Jan 17, 2021
01/21
by
Cecil Clontz (cclontz)
data
eye 6
favorite 0
comment 0
This is a remix of the Resin.io STEM case. (https://www.thingiverse.com/thing:2275029) I made the top solid (no cut-out for the GPIO). I added standoffs to both the bottom and top where there were none. I added a lip on the top so it just stays snapped shut with no glue. I printed on a PowerSpec Ultra with PLA at 25% but it should be fine with much lower percentage. I'm also using 3 shells but just for durability.
Topics: Electronics, stl, Zero_Stem, thingiverse
9
9.0
Jan 11, 2021
01/21
by
Richard Hayler (topshed)
data
eye 9
favorite 0
comment 0
A case for a Raspberry Pi Zero with a [Pimoroni USB Stem](https://shop.pimoroni.com/products/zero-stem-usb-otg-connector) attachment. This is intended to be used with a male-female USB cable rather than plugged directly into a PC or Laptop. The hole in the top piece should align with the nylon screw next to the Zero's green LED so that you can easily see its status.
Topics: Zero_Stem, thingiverse, Computer, stl
7
7.0
Apr 17, 2021
04/21
by
Marvin Burmeister (marvelous-marv)
data
eye 7
favorite 0
comment 0
As I didn't change the bottom part, I felt no need to upload it here. Grab it from the original work. If this is not good practice, let me know. Also look the original thing for printing details, I just got rid of the slit for the header pins, as I want to use it with P4wnP1 and it should look as discrete as possible. For the lazy people, use this for further info and files: https://www.thingiverse.com/thing:2275029
Topics: Electronics, Zero_Stem, thingiverse, stl
8
8.0
Jan 11, 2021
01/21
by
Emzy Enzyme (Emzy)
data
eye 8
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/30ws7OyZgoF raspberry pi zero case for Pi Zero USB Stem from pimoroni
Topics: Zero_Stem, thingiverse, 3D Printing, stl
7
7.0
Apr 17, 2021
04/21
by
Brian Beattie (beattie97211)
data
eye 7
favorite 0
comment 0
"The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies." [lmore info here](http://zerostem.io). This is a case for a ZeroStem, designed with Openscad. It is held together with 4 M2.5x1mm screws.
Topics: Zero_Stem, thingiverse, stl, Computer, raspberry_pi_case, Raspberry_Pi_Zero
1
1.0
Mar 26, 2021
03/21
by
(sakoula)
data
eye 1
favorite 0
comment 0
**case for @pwnagotchi** @pwnagotchi and @evilsocket rocks! pwnagotchi project: https://pwnagotchi.ai/ This is compatible with the Raspberry Pi Zero/Zero W with the "Stem" by [zerostem.io](https://zerostem.io/) - a PCB shim that turns it into a dongle. The screen used is the [2.13inch E-Ink display HAT for Raspberry Pi](https://www.waveshare.com/product/modules/oleds-lcds/e-paper/2.13inch-e-paper-hat.htm) It was modelled using Fusion 360. The sources are included in the case someone...
Topics: stl, Raspberry_Pi_Zero_W, thingiverse, Zero_Stem, fusion360, 3D Printer Accessories, case
6
6.0
Jan 17, 2021
01/21
by
Mark (markab)
data
eye 6
favorite 0
comment 0
SoaPiBarZero - a soap bar shaped enclosure for the Raspberry Pi Zero. This version turns any Pi Zero V1.3 (with camera connector) and Pi Zero W into a usb stick when used with a Pi Zero USB Stem, available here https://zerostem.io
Topics: Electronics, SoaPiBarZero, Stick, thingiverse, Raspberry Pi, Zero, USB, PiStick, Zero_Stem, Stem,...
6
6.0
Jan 16, 2021
01/21
by
Paul Massey (Scriptwerx)
data
eye 6
favorite 0
comment 0
Following on from our [Raspberry Pi Zero / Zero W Stem Case](https://www.thingiverse.com/thing:2488949) we've created a new version with many improvements. This is a case for the Raspberry Pi Zero/Zero W with the "Stem" by [zerostem.io](http://zerostem.io) - a PCB shim that turns it into a dongle. The enclosure has been redesigned to be a much better, all around enclosure with two interlocking parts, rather than a box with a simple lid. The case is now 2mm shorter allowing for a...
Topics: Raspberry_Pi_Zero_W, thingiverse, Electronics, raspberry_pi_housing, stl, Raspberry_Pi_Zero,...
6
6.0
Jan 15, 2021
01/21
by
Paul Massey (Scriptwerx)
data
eye 6
favorite 0
comment 0
The much improved Version 2 is here: https://www.thingiverse.com/thing:2516525 --- This is a case for the Raspberry Pi Zero or Zero W with the "Stem" by [zerostem.io](https://zerostem.io) - a PCB shim that turns it into a dongle. We bought the Zero Stem from [Pimoroni](http://pimoroni.com) who are awesome. The other case we tried was oversized, printed badly and actually fell apart due to not being designed properly - so we made this one! The case was created from scratch in...
Topics: Raspberry_Pi_Zero_W, thingiverse, Electronics, RaspberryPi, raspberry_pi_housing, stl, Zero_Stem,...
9
9.0
Jan 12, 2021
01/21
by
Carlo Maria Curinga (curcuz)
data
eye 9
favorite 0
comment 0
I wanted a [resin.io](https://resin.io/) powered portable device so I made this. This is a stick case for the Raspberry Pi Zero with [Pi Zero USB Stem](https://shop.pimoroni.com/collections/new-products/products/zero-stem-usb-otg-connector) . It has a keychain ring and cutouts for the 40 pin GPIO HAT, the USB and miniHDMI ports. I attached 2 lid versions, one with the resin.io logo and one without it.
Topics: rpi, Raspberry_Pi_Zero, pizero, resin, RaspberryPiZeroCase, raspberry, thingiverse, Electronics,...
