5
5.0
Apr 8, 2021
04/21
by
Maxim St-Pierre (maxsteel333)
data
eye 5
favorite 0
comment 0
I made this active cooler specially for a Mbot 3d but might still fit on most mk8 & mk7 dual extruders i used a 24v blower fan to minimize size, link bellow. http://www.dx.com/p/av-0-13a-24v-2-pin-hdd-27-blade-cooling-fan-black-red-305655#.VCbNR2ddWaI any tips let me know
Topics: active_cooling, active-cooling, MBot_3D_Printer, stl, Other, active_cooler, thingiverse,...
9
9.0
Apr 7, 2021
04/21
by
(3DPrinting4all)
data
eye 9
favorite 0
comment 0
This is an active cooling fan solution for the Replicator 2X. It is similar to the design by ten13th except it is made to work with any 40mm front-discharge fan. It is secured in place with two of the long hex bolts from the extruder, and the fan is secured to the duct using the bottom 2 screws. I tried initially to use the MakerBot motherboard's cooling fan relay, however this is a 24V output so it should only be used with 40mm cooling fans rated for 24V. The relay did not seem to respond well...
Topics: stl, 3D Printer Accessories, Active_cooling, thingiverse
9
9.0
Apr 27, 2021
04/21
by
Paul Paukstelis (shocksofmighty)
data
eye 9
favorite 0
comment 0
This thing is a new take on my previous work making an extension duct to allow the very common dual extruder Active Cooling Fan from thruit00 (http://www.thingiverse.com/thing:537918) to work with the stock FFCP2016 (and other models) side blower fan (http://www.thingiverse.com/thing:1746693). As I was working on fixing things I decided it might be nice in some cases to be able to control the air flow to the right or left extruder. I began playing with the idea of integrating a basic damper...
Topics: thingiverse, active_cooling, stl, 3D Printing, cooling_duct
6
6.0
Mar 9, 2021
03/21
by
Paul Bristow (makegeneve)
data
eye 6
favorite 0
comment 0
After a board failure in my Printrbot Simple Metal, I replaced my printrboard electronics with a mini-RAMBO card and the latest version of Marlin Firmware. I hand-made a mounting adapter to fit the mini-RAMBO where the printrboard had fitted, in the space under the printer. It rapidly became clear that I needed to actively cool the A4988 drivers in the mini-RAMBO card, hence this fan holder. It just clips to the underside of the printer, blowing air upwards over the electronics. Wire the fan...
Topics: stl, thingiverse, 3D Printer Accessories, active_cooling, cooling
9
9.0
Apr 27, 2021
04/21
by
Paul Paukstelis (shocksofmighty)
data
eye 9
favorite 0
comment 0
UPDATE: I've redesigned this to include a damper to restrict airflow to a particular extruder. http://www.thingiverse.com/thing:1753983 That version is significantly more useful. I really liked the design of the active cooling fan duct from thruit00 (http://www.thingiverse.com/thing:537918) primarily because it gets cooling from multiple directions for both extruder head. This seemed to me to be important in a number of cases. However, I wanted a way to use the existing side blower fan on my...
Topics: thingiverse, active_cooling, stl, 3D Printer Accessories, FFCP
Harvesting energy from the sun makes the photovoltaic (PV) power generation a promising technology. To obtain a consistent state of charge (SOC), consistent energy must be harvested and efficiently directed to the battery. Overcharging or undercharging phenomena decreases the lifetime of the battery. Besides, the effect of irradiance toward solar in term of sunlight intensity effects the efficiency and hence, sluggish the SOC. The main problem of the solar panel revealed when the temperature...
Topics: Active cooling, Energy, Internet of Things, Photovoltaic, Solar systems
6
6.0
Mar 15, 2021
03/21
by
lionel jouvet (ecolio314)
data
eye 6
favorite 0
comment 0
active cooling cover for DC Boost Converter, 150W 8A DC-DC Step Up Converter Board. Also accept step-down board on the side for a 12V 60mm fan. Objects oriented ready to print, no support required. needs 4 M3 screws 10-20mm to assemble, and 4 short screws for the fan. ABS advised. Step-Down Power Adjustable Module With Lm2596s: https://www.gearbest.com/goods/pp_009317170203.html?lang=en&wid=1654075&utm_source=email_sys&utm_medium=mail&utm_campaign=GB_GB_orderCreate_181002 DC...
Topics: thingiverse, Stepdown_Module, boost_converter, Electronics, active_cooling, stl
8
8.0
Apr 8, 2021
04/21
by
Filip To (msufilip)
data
eye 8
favorite 0
comment 0
This bracket enables you to give active cooling to the hot end of TAZ3. It helps with the problem of the Hobbed bolt digging into the filament because it keeps the aluminum flange of the Budaschnozzle cooler, which keeps the segment of filament between the heat radiating fins and the top aluminum flange in solid (in hardened state). Active cooling makes your printer less picky on what brand of Filament to use... For example, I can now use ABS from MatterHacker, DeltaMaker, IC3D, etc. I was not...
Topics: active_cooling, Hot_E, stl, thingiverse, 3D Printer Accessories
2
2.0
Dec 13, 2021
12/21
by
silver mag (5ilver)
data
eye 2
favorite 0
comment 0
This is a clip to easily mount a fan to a phone running server workloads. The scad file has parameters to easily fit any size device. Make two of them for better support of the device. Supports using any size fan using two screws on two clips or one screw on one clip. (Update, part lays flat for easier printing and more strength now) Pinephone pictured with a 120mm thermaltake psu cooling fan
Topics: Mobile Phone, cooling_fan, active_cooling, stl, thingiverse, cooling, smartphone
3
3.0
Apr 20, 2021
04/21
by
Charlie (flimshaw)
data
eye 3
favorite 0
comment 0
I have an old dual-extruder replicator clone, and the 2nd extruder was nothing but trouble so I got rid of it and use it as a single machine. This gives me room for a big ol' fan! I really loved the fan ultravincent designed, it was so easy to install, but I was noticing a definite quality difference between the side of the print that faced the fan and not. So I basically borrowed his amazing latch connector thing and plopped a ring duct around it. I designed it in Blender with shapes and some...
Topics: cooling_duct, thingiverse, stl, active_cooling, 3D Printer Accessories, fan
9
9.0
Apr 23, 2021
04/21
by
Chris Fullwood (fullwoc)
data
eye 9
favorite 0
comment 0
This is a duct for the Active cooling fan Thing:537918 (http://www.thingiverse.com/thing:537918) when using a side mounted turbo fan. I used thermal heat gasket to attach the two pieces. Seems to work great.
Topics: turbofan, active_cooling, fan_duct, stl, thingiverse, 3D Printer Accessories
10
10.0
Jan 11, 2021
01/21
by
Ronaldo Oliveira (ronaldor)
data
eye 10
favorite 0
comment 0
Best vertion to active cooling with 40mm coller, use springs and screws to full ajust height, angle and position.
Topics: thingiverse, CTC_prusa_i3, stl, 3D Printer Parts, active_cooling
9
9.0
Apr 28, 2021
04/21
by
matt Gleason (mattg8892)
data
eye 9
favorite 0
comment 0
this design if for use with a ctc or like printer if you have upgraded to a e3d v6 hot end and titan extruder. works with bracket thing number 1834216 fully tested and working on my personal ctc i have added pictures of a 3d benchy before and after i designed this blower mount both printed on the e3d v6 with identical settings one with fan one without in pla. bad print was stopped early because there was no need to continue
Topics: thingiverse, active_cooling, 3D Printer Parts, stl, ctc_printer, CTC
4
4.0
Jun 6, 2021
06/21
by
Konstantin Reeck (KonniR)
data
eye 4
favorite 0
comment 0
Airflow optimized and space efficient active cooling adapter for a standard 80mm fan with 71.5mm screw spacing. Use 3 x 8mm or 2x 10mm screws (no middle screw in latter case - don't damage the chip behind that one!) for mounting the adapter to the card. Screw head diameter needs to be 5mm or smaller.
Topics: nvidia, Active Cooling, fan, Adapter, Tesla, thingiverse, V100, stl, Computer
9
9.0
Apr 26, 2021
04/21
by
Tam Wah Kit (calvintam)
data
eye 9
favorite 0
comment 0
This Active Cooling System is made for the Wanhao Duplicator 4 series and Flashforge. This variation is made to fit blower type fans that is 40mm big (24V), 20mm thick, although 10mm thickness would probably work too. ### UPDATE! (V2) Hey guys, if you have downloaded the previous duct, please redownload V2. I noticed there's some problems with the fan position being too high that it hits the casing when the extruder is being homed. This has been corrected in V2, it now sits below the case with...
Topics: thingiverse, active cooling, stl, 3D Printer Accessories, wanhao duplicator 4
5
5.0
Jun 6, 2021
06/21
by
David Scanlan (davidscanlan)
data
eye 5
favorite 0
comment 0
Superseeds http://www.thingiverse.com/thing:304921 Old Cooling, cooled extrudes too much. New version shields extrude elements and directs air to printed area. redirected air angled fans improved reducer shape
Topics: active_cooling, thingiverse, active_cpp, stl, 3D Printer Accessories, duplicator_4
4
4.0
Apr 13, 2021
04/21
by
(mikepcw)
data
eye 4
favorite 0
comment 0
Allows you to cool passive PCIe GPUs in workstation cases. Noise test video: http://youtu.be/V4w5BXtjZpY ## Intended for system testing purposes only. Designed and tested on HP Z800 series workstations, but should fit all full size ATX cases with recessed PCI bays. Extracts up to 2x double wide passive GPUs (installed adjacent to each other). See instructions for suggested fans. Things you will need besides printed parts: * Approx 40cm Neoprene (or other closed pore) foam strip, about 10mm wide...
Topics: thingiverse, GPU, Workstation, active_cooling, PC, stl, Other, fan, cooling_fan
31
31
Mar 16, 2021
03/21
by
Fadhilah Abdul Razak, Robiah Ahmad, Shamsul Sarip
texts
eye 31
favorite 0
comment 0
Recently, piezoelectric fan has gained attention as potential active cooling method for electronics devices. Even though the piezoelectric requires high voltage, there are findings to overcome the shortcomings. Adding on a magnet at the tip of the piezoelectric fan to activate other magnetic passive fans is one of the methods to increase the total amplitude generated by the fans. This paper will discuss on the performance of integrated piezoelectric fan with passive fans (later refer to...
Topics: Active cooling method, Heat transfer coefficient, Magnetic fans, Piezoelectric, Repulsive force
7
7.0
Mar 20, 2021
03/21
by
Filip To (msufilip)
data
eye 7
favorite 0
comment 0
This is an updated version of the cooling fan box for TAZ3 I posted previously. The update involves modifications of the holes and addition of a heat sink cooling hole. I found the heat sink cooling is a nice force cooling for the heat sink, It keeps the aluminum parts cool and it minimizes the digging-in problem which enables the printer to print with more brands of filaments. Yes, you can tape the holes you are not using. For example you want to tape the filament cooling hole when you are not...
Topics: Active_cooling, thingiverse, cooling_fan, 3D Printer Accessories, Taz_3, stl
7
7.0
Jan 21, 2021
01/21
by
christophe weibel (mastersystem)
data
eye 7
favorite 0
comment 0
I realized this system of cooling because it is necessary to wait a certain time before being able to take off the piece of the plate. I find that the result is efficient, it must of course activate the fans only at the end of printing. it takes 9 minutes to go from 60 ° to 35 ° Celcius with a single fan, I placed two fans on my CR10 but I have not had time to test :-) I will now realize the electronic system to make it automatic at the end of printing. Do not hesitate to come back to see the...
Topics: active_cooling, 3D Printer Parts, fan, thingiverse, cooling_fan, bed, stl
3
3.0
Jan 5, 2021
01/21
by
TCPoly TCPoly (TCPoly)
data
eye 3
favorite 0
comment 0
Serpentine channel liquid cold plate that can be printed in TCPoly's thermally conductive material (tcpoly.com/filaments) to achieve high performance liquid cooling. These cold plates are light weight, corrosion resistant, and low cost.
Topics: Liquid_Cooling, stl, waterblock, Electronics_Cooling, heatsink, thingiverse, active_cooling,...
2
2.0
Oct 29, 2021
10/21
by
Philipp Schulz (PhilippSchulz)
data
eye 2
favorite 0
comment 0
Remixed from: https://www.thingiverse.com/thing:3717401 I mainly remixed the top of the case to allow a 40x40x10mm 5V Noctua fan to be mounted on it using some self cutting screws (I think they come with the fan). Also, I added the slot for a camera cable as in other remixes (like this one: https://www.thingiverse.com/thing:4601571) I power the fan via 3,3V to reduce noise, even a Noctua fan gets loud at some point. There is still a little bit clearance between the fan and the heatsink on the...
Topics: thingiverse, active cooling, Computer, Raspberry Pi, stl, case, active cooled case
4
4.0
Jan 7, 2021
01/21
by
Max Bruce (protryon)
data
eye 4
favorite 0
comment 0
Designed to be glued into a 10-11mm radiator hole, and attaches to a 7mm inner diameter pipe. Made for cheap computer radiators being used in my 3D printer. Didn't bother with threading, but can probably be done, SCad file included.
Topics: Parts, stl, hose, radiator, plumbing, thingiverse, threaded, cooling, active_cooling, Barb
6
6.0
Apr 19, 2021
04/21
by
Sean Esopenko (kwirky)
data
eye 6
favorite 0
comment 0
This is a DuetWifi board mount which attaches to 2020 aluminum extrusion, cooled by a 120mm fan. I wanted a vertical mount for my duet and I have lots of 120mm fans kicking around. The fan is attached with PC Fan screws. The board screws have to be attached before the fan is attached with the screw heads on the backside, where the fan is. I countersunk the holes so that you can get the screws in and attach the fan. I'm currently printing it and will post pictures of the printed result when I'm...
Topics: DuetWifi, thingiverse, 3D Printer Parts, stl, 2020, active_cooling, controller_board, Duet,...
8
8.0
Jan 19, 2021
01/21
by
Nathan Ream (Nathanrm)
data
eye 8
favorite 0
comment 0
I love this fan mount but I could not find a 30 x 30 x 6,5mm fan. The most popular and available fan for raspberry pi close to the original size is 30mmx30mmx7mm. PiFan (Model: LD3007MS). I simply modified the original "Raspi Fan Mount without Screws" to fit the more popular and accessible PiFan. This fan is resold as multiple brands (iUniker, Makerfocus and WINGONEER) on amazon and aliexpress. Just make sure the model matches. (Model: LD3007MS) This modified mount is only 2mm taller...
Topics: active_cooling, screwless, 30mm_fan, stl, thingiverse, PiFan, Raspberry_Pi, without_screws,...
3
3.0
Jul 3, 2021
07/21
by
Roy Darnell (ristlin)
data
eye 3
favorite 0
comment 0
All of my projects were printed with a Prusa Mk3S. If you want additional details on assembly, parts sourcing, printing instructions or anything else, please say so or show intrest. I will try to upload more instructions\videos\photos\descriptions. Note that the models are non commercial - for commercial use and royalties please contact me directly on my email: ristlin AT gmail . com
Topics: computer, Computer, cooling, cooling_fan, stand, computer_stand, thingiverse, stl, active_cooling
10
10.0
Jan 11, 2021
01/21
by
Ransom Christofferson (ransoing)
data
eye 10
favorite 0
comment 0
This is a mounting kit to add a 80mm computer case fan to your 3d printer as an active cooling fan. This was designed for the RepRapGuru Prusa i3 v2, but it should work with any printer with a Mk7/8 extruder. I designed the screw holes to work with the extra screws that came with my printer kit. The screw holes should be narrow enough that the screw threads bite into the plastic and hold it in place without need for nuts. Depending on your hardware and printer settings, you may need to adjust...
Topics: 80mm, MK8, thingiverse, RepRapGuru, stl, 3D Printer Parts, active_cooling, Fan_mount
4
4.0
Apr 15, 2021
04/21
by
Drew Petitclerc (DrewPetitclerc)
data
eye 4
favorite 0
comment 0
I have an Zortrax M200P that has been modified by myself to allow using all the other plastics available on the market today, PLA, ABS Nylon, Wood and metal filled and just as with my "UP Plus Pro" I found the stepper motor of the extruder getting too hot over long print times and transmitting the heat through the feeder gear and pre-softening the filament causing strip-out, so I added this mod to use compressed air to actively cool the gear, it works great just as it does on my other...
Topics: Zortrax, Z-Temp, thingiverse, stl, cooling, active_cooling, modifications, 3D Printer Accessories
4
4.0
Apr 12, 2021
04/21
by
(PSS6)
data
eye 4
favorite 0
comment 0
This is a tube guide to provide print cooling using an aquarium air pump (like http://www.amazon.com/Hydrofarm-Air-Pump-Outlets-7-8L/dp/B002TCC46U/ref=zg_bs_2975471011_7) and some 3mm silicone tubing. This provides short bursts of cool air directly aimed at the print nozzle, which helps reducing warpage by not cooling the entire platform. I use this setup to print very small and detailed parts which would otherwise turn in to blobs of ABS. You can simply screw it in front of the fans. I used...
Topics: thingiverse, 3D Printer Accessories, print_cooler, active_cooling, cooling_system, stl, cooling
4
4.0
Mar 5, 2021
03/21
by
S.K. P. (fwiffo)
data
eye 4
favorite 0
comment 0
The idea behind this is to mount a sensor + 2 40mm turbo fan without having to worry for dimensions, this is specifically designed for all the Makerbot Replicator 1 dual clone, that don't want to drop the second extruder, since it comes in handy with ditto printing, and want the cooling of the piece, for better look and aspect of the printed parts. I remixed the thruit00 idea plus mine backcooler "tiny" walls idea, but this time with thicker walls and a curved and separated fan...
Topics: stl, 3D Printer Accessories, turbofan, 40mm_fan, sensor_mount, active_cooling, thingiverse
11
11
Jan 9, 2021
01/21
by
(IVIUPPET)
data
eye 11
favorite 0
comment 0
Active cooling is an absolute necessity for printing with PLA. It just doesn't cool fast enough to get good results otherwise. Axial fans do not provide the CFM and pressure to adequately do this job, in my humble, non-fluid-fluent opinion. Hell, I don't even know what laminar vs turbulent flow is. But a blower fan will provide more of what you want for this application than an 'axial' fan. Sometimes it seems too much, but my PLA parts have fine sharp edges so I thought I'd share what I've been...
Topics: duplicator 4x, 3D Printer Accessories, replicator 1, flashforge, Active cooling, fan, thingiverse,...
9
9.0
Apr 22, 2021
04/21
by
Laurent Pavot (Mr_Pavot)
data
eye 9
favorite 0
comment 0
I wanted to get better cooling for my foldarap and I only have the 1.1 version (to lazy to change to 2.5) so I designed this thing! Since I used this X-carriage, I used the same system to attach the duct on the head: http://www.thingiverse.com/thing:84345 You might have to adjust the holes sizes, by hand to make a better fit. (especially for the part 3) I welded part 1 and 2 by melting the edge with a lighter, but you can use glue as well. Part 2 should be around 2 layers thick. On the picture...
Topics: thingiverse, cooling, 3D Printer Parts, stl, active_cooling, fan_duct, 40mm_fan, Foldarap
11
11
Apr 16, 2021
04/21
by
R Dahm (rdahm)
data
eye 11
favorite 0
comment 0
Bassna remixed thruit00's cooling vent, and disabled the left side. Good! I don't have a left extruder on my FlashForge 95% of the time, so this works well. BUT, Bassna left some extra mass on the part (womp-womp, I'm always trying to save on gantry weight), as well as a tiny vent still pushing air to the unused side (tsk!). Nice thing about thingiverse, I don't have to whine, request a remix, wait for a V2.45, whatever. Just remodel and share. So, this is a right-side-only extruder fan (mirror...
Topics: pla, thingiverse, stl, flashforge, ctc, print cooling, active cooling, cooling, 3D Printer...
This experimental work is looking at the properties of photovoltaic/thermal (PV-T) system, which had designed to increase the output power of the PV panel for the climate of Zarqa, Jordan. Operating temperature of the PV module has a significant impact on the performance of the PV module. However, most of the radiation energy absorbed by the PV panel is converted into heat, which is normally lost and provides no value. In order to decrease the operating temperature of the PV panel, a water...
Topics: Photovoltaic/thermal system, Control system, Water active-cooling, Solar panel, Efficiency of panel
7
7.0
Jan 21, 2021
01/21
by
Vitor Viana (masterviana)
data
eye 7
favorite 0
comment 0
This is my mod for great design of @petieken for active cooling the stepper driver in trogorilla board that anycubic uses in many printers. You could find the original here https://www.thingiverse.com/thing:2941653 my design have only the empty space in top left of the duct to allow the SPI wires for control TMC2310 and still have good air flow through steppers its uses a 5020 blow fan. Print upsidedown with supports. Enjoy
Topics: active_cooling, TMC2130, 3D Printer Accessories, Anycubic_Kossel, thingiverse, cooling_fan,...
3
3.0
Jan 7, 2021
01/21
by
Flo Pas (Flo3Dprint)
data
eye 3
favorite 0
comment 0
A nice stand to put your laptop on so it stays cool! Printable with an Ender 3 bed size
Topics: laptop, stl, Computer, laptop_accessories, laptop_stand, computer, thingiverse, active_cooling,...
13
13
Apr 16, 2021
04/21
by
(villamany)
data
eye 13
favorite 0
comment 0
I own a CTC Dual 3d printer and do not use the second extruder for more than to do some early tests. This second extruder and his wires only causes more vibrations and troubles when maintenance. So i remove it and use the extra space for adding an active cooling system. This produces great results when PLA printing (or very small parts from some materials). If you want an efective active cooling system, try it. It is clean and compact design and produces better results than any of standard...
Topics: fan, pla, thingiverse, replicator, stl, flashforge, cooling, active_cooling, duct, 3D Printer...
4
4.0
Apr 8, 2021
04/21
by
Chanin Rojlertjanya (Cqdude)
data
eye 4
favorite 0
comment 0
This is just a little thing I made because I was too lazy to go out and get some proper bolts. It's such a small silly thing but thruit00 asked if I would share, so here goes :) I needed to attach this http://www.thingiverse.com/thing:295317 cooling duct to my FF creator pro but I didn't have any small bolts or screws that would fit so I made this little bracket thing and superglued it to the back of the fan duct. Works like a charm. And because the whole thing is so light it doesn't budge or...
Topics: active_cooling, stl, bracket, thingiverse, fan, flashforge, Flashforge_Creator_PRO, 3D Printer...
11
11
Apr 5, 2021
04/21
by
John Porter (3FPD)
data
eye 11
favorite 0
comment 0
This is a cooling duct under development for the Makerbot Replicator 2X Dual-Head 3D Printer. (Check out the print quality before and after pics...purple before, black after) *** DO NOT USE WITHOUT A FAN *** DO NOT USE UNATTENDED, USE AT OWN RISK. DESIGN UPDATED, BUT STILL A WORK IN PROGRESS. (23OCT13) *** Added Rev3-higher flow version (25NOV13) *** The purpose is to produce a cooling blanket of air across the print head/part to help produce a better quality finish on parts that have features...
Topics: thingiverse, rep2x, replicator_2x, 2x, stl, active_cooling, cooling, 3D Printer Extruders, extruder
5
5.0
Apr 12, 2021
04/21
by
Andrew Buyck (Ruyck)
data
eye 5
favorite 0
comment 0
This is a 40mm fan holder for the Deltprintr hotend. It clips onto the traxxas joints above the hotend platform.
Topics: thingiverse, hotend_cooling, 3D Printer Accessories, active_cooling, Deltaprintr, stl, fan,...
9
9.0
Jan 11, 2021
01/21
by
XY Z (makerbotman)
data
eye 9
favorite 0
comment 0
Remix of a great remix, but my screws did not bite into the holes, so I added McMaster Carr metal inserts for serviceability. Use McMaster 94180A333 Heat-Set Inserts for Plastics M3 x 0.5 mm Thread Size, 6.4 mm Installed Length. https://www.mcmaster.com/#94180a333 Press them in as far as you can go, then give it a little soldering iron heat to melt them into place.
Topics: active cooling mount, fan, thingiverse, stl, makerbot, 3D Printer Parts, replicator part,...
11
11
Mar 21, 2021
03/21
by
C Biker (CBiker)
data
eye 11
favorite 0
comment 0
Optionaler MOSFET IRF 7413 zur Steuerung des EXTRA Ausgangs.
Topics: cooling_fan, stl, active_cooling, 3D Printers, fan_duct, MightyBoard, extra, CTC, thingiverse,...
3
3.0
May 1, 2021
05/21
by
Alex Mk (Kapusta714)
data
eye 3
favorite 0
comment 0
So a friend of mine have asked me, to design an active cooling solution for his UDM because it reached 85 degrees with its build in fan. With this solution we achieved an constant drop to 65 degrees Celsius. We used an Arctic P8 fan (any 80x80x25 fan should work) running on 5V instead of 12V due to the noise level. Sure the results should be even better with 12V, but it had to be silent, because the UDM is in the living room. So we decided to run it from an usb charging brick. The fan should...
Topics: stl, unifi_dream_machine, Dream_Machine, active_cooling, Computer, udm, Ubiquiti, thingiverse,...
3
3.0
Jan 5, 2021
01/21
by
Nicholas Golob (RaMcHiPTech)
data
eye 3
favorite 0
comment 0
I printed a multi-piece reservoir and it actually worked really well so I decided to redesign as 3 pieces with a gasket printed in ninja-flex. Print this solid with 5 tops, 5 bottoms and 5 shells with slight over-extrusion preferred over under-extrusion. Print the gasket @100% infill out of ninjaflex or another TPU.
Topics: Liquid_Cooling, stl, Computer, water, liquid, thingiverse, cooling, active_cooling, loop,...
5
5.0
Apr 5, 2021
04/21
by
Emmanuel (watsdesign)
data
eye 5
favorite 0
comment 0
Not tested yet, but you know : "release early/often" ;-) http://reprap.org/wiki/Category:FoldaRap_Development#Print_Cooling_:_in_progress [edit]: it works !
Topics: thingiverse, active-cooling, eMaker, active, 3D Printer Accessories, fan, Huxley, FoldaRap, stl,...
5
5.0
Apr 5, 2021
04/21
by
Eric (IdefixRC)
data
eye 5
favorite 0
comment 0
Obsolete: please see here for a much better solution: - https://www.thingiverse.com/thing:2429033 - https://www.thingiverse.com/thing:221306 As the 2X comes without active cooling for PLA prints (a great project which works on a retrofit can be found here: http://www.thingiverse.com/thing:90174 ) I designed this simple frame to allow the installation of up to 3x 90mm PC fans for active cooling. Simply remove the hood, open the door and slide the frame on.
Topics: thingiverse, upgrade, 3D Printer Accessories, fan, frame, pla, 2x, stl, active_cooling, replicator,...
5
5.0
Mar 18, 2021
03/21
by
Amtech 3D (Amtech)
data
eye 5
favorite 0
comment 0
Simple but very useful and airtight filter cloth frame for 120mm PC fan or Wall airtunnel hole. I will use only dust and nanoparticle filter cloth but you can use even active charcoal filter in this if you need :) Screw hole sizes for M4 bolts (4,40mm hole) Outer dimensions 120x120mm Hole dimensions 105x105mm FLIP OBJECTS TO FLAT POSITION BEFORE PRINTING/SLICING !! History: -added Pictures -added better 3Dmodels -added Frame with Grid and better grooves -removed old files and pictures (when...
Topics: cleaner, dust, Health, 120mm, Computer, fan, stl, charcoal, thingiverse, accessory, air, filter,...
9
9.0
Apr 27, 2021
04/21
by
Pelle Trelje (Perrow)
data
eye 9
favorite 0
comment 0
Fan mount for side mounted Geeetech control board. Made this to get rid of the noisy 40mm fan of my Geeetech Prusa i3 printer and mount a 80mm Fractal fan instead. Use the screws supplied with the fan to attach it and slide the "lip" of the fan mount under the board from above. Use the slots in the base to route the cables away from the board to maximize the air flow over the components that need it. After changing the extruder fan and the board cooling fan of my printer I no longer...
Topics: thingiverse, active_cooling, ramps_14, cooling, cooling_fan, prusa_i3, stl, 3D Printer Accessories
11
11
Apr 30, 2021
04/21
by
Gerhard Wildzeisz (Golkun)
data
eye 11
favorite 0
comment 0
Attention: Rev3 has now the lower mounting hole accessible, which was not the case with rev2. Due to lately abnormal print terminations which I assume came from the stepper motor drivers overheating, I modified the original Prusa Rambo Case to have an active cooling fan and also air vents on top of the case. Fan details: 12V/0.6W 40x40mm outer dimension 32x32mm hole distance width doesn't matter As the fan is very quiet I connected it permanently to 12V.
Topics: stl, active_cooling, rambo_board, 3D Printer Parts, cooling, prusa_i3_mk2, thingiverse, case
5
5.0
Mar 19, 2021
03/21
by
MakerBlock (MakerBlock)
data
eye 5
favorite 0
comment 0
I've some people mention that longer prints with PLA require active cooling. This duct is intended to replace one of the small plastic sides between the front and back acrylic plates for your MK5-6 style extruder. The smallest fan I could find at the local electronics store was a 40mm fan. However, the front and back acrylic plates are only 35mm apart. This duct gives a mount for a 40mm fan, letting it blow air into a 40mm diameter cone, which narrows to 35mm, which goes to a 35mm wide duct...
Topics: ducting, fan, air duct, cooling duct, thingiverse, active cooling, duct, Other, openscad, cool, stl
