3
3.0
Mar 9, 2021
03/21
by
Crizzle Connolly (crizzle)
data
eye 3
favorite 0
comment 0
This clever adaptor is for using Dyson accessories with a VAX Blade. Please note the Dyson main head will not fit - just the accessories (as demonstrated in pictures). The Dyson accessories are from a Dyson City vacuum cleaner which has the 34mm fitment size (as shown in picture). I think there are two different sizes of Dyson accessories so just make sure yours is the 34mm diameter one. The VAX Blade has the 36.4mm fitment (as shown in picture). Use those accumulated Dyson accessories again!!!...
Topics: stl, thingiverse, adaptor, dyson, hoover adaptor, dyson adaptor, vax, vax adaptor, Replacement Parts
5
5.0
Jun 21, 2021
06/21
by
PABLO ARENCIBIA (SoFlowFPV)
data
eye 5
favorite 0
comment 0
UPDATE: I have modified and added the same adaptor with 20x20 M3 for some boards that use 20x20 but also M3 holes! allows a 20x20 compontent to be mounted to a 30.5x30.5 area. studs are hollow to allow m2 bolt to screw component down print in any material, i used PLA
Topics: vtx adaptor, thingiverse, fc adaptor, 20x20 adaptor, 30mm, 30.5 x 20, stl, 30x20, 20mm,...
10
10.0
Apr 24, 2021
04/21
by
Jon Aldalur (jasaski)
data
eye 10
favorite 0
comment 0
uLu is an adaptor I designed for my ipad 2 speaker. I noticed that being the speaker in the back, I couldn't really take everything out from it when watching something with the ipad standing up, because the speaker is located in the back. With this little device I can direct the sound towards the person that is facing the screen. It's a quite thin piece and you can use it with the common "magic cover" that is sold for the ipad. Hope you guys like it and find useful!
Topics: speaker_adaptor, Audio, audio, stl, thingiverse, iPad2, adaptor
6
6.0
Apr 20, 2021
04/21
by
Xavier Kuehlein (Xman1664)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1246651
Topics: vacuum, thingiverse, stl, customized, miele, miele adaptor, vacuum adaptor, miele vacuum adaptor,...
3
3.0
Apr 5, 2021
04/21
by
pory lee (porysmail)
data
eye 3
favorite 0
comment 0
dan wesson715 6inch 모델용 11mm 시계방향 정나사 트레이서 어댑터 입니다. 컬러파츠 대용으로 사용 가능합니다. 레일이 달린 모델과 레일이 없는 모델로 구분지었습니다. 제가 디자인한 컬러파츠를(orange tip) 장착한 상태로 장착 가능합니다. (다른 오렌지 팁은 테스트해보지 않음) https://www.thingiverse.com/thing:4335784 고정을 위해서는 m4 x 10mm 육각 유두볼트 1개 혹은 2개가 필요합니다....
Topics: thingiverse, asg, stl, Hobby, dw715, Tracer_adaptor, silencer_adaptor, DanWesson
Topics: manualzz, manuals, Adaptor Set, Silvercrest user manuals, Silvercrest service manuals, Adaptor Set...
15
15
texts
eye 15
favorite 0
comment 0
Topics: manualzz, manuals, Casio Adaptor manual, Adaptor pdf download, Adaptor User`s guide, Casio user...
0
0.0
Aug 13, 2022
08/22
by
George Zaharia (REDF00Q)
data
eye 0
favorite 0
comment 0
I have 4 rechargeable AA batteries but most of times i find myself im running out of them while i have to charge them, and i also have a bunch of AAA batteries rechargeable so i made an adaptor to be able to use the AAA as AA for my wireless mouse when i recharge the AA batteries. **the hexagonal hole is for m4 bolts but is a bit bigger. if you print with 0.3 should fit almost snug unless the interior walls warp and then the hole becomes smaller** i print it at 0.28 the hole is a tad bit bigger...
Topics: Parts, m4nuts, Battery Adaptor, mouse battery adaptor, stl, tripleAtodoubleA, thingiverse
2
2.0
Jan 18, 2022
01/22
by
Toni Lara (tonilara)
data
eye 2
favorite 0
comment 0
Allows you to fix your QUAD-LOCK smartphone case on a POLAR handlebar adapter. Required material: printed part x3, DIN7985 M4x10 screw and DIN985 M4 nut. Using PLA as a printing material, the strength of the product is enough to fulfill its function, although, it is necessary to print the part at 45º to avoid the layer decohesion during use.
Topics: quadlock, thingiverse, Polar, polar_adaptor, quadlock_adaptor, stl, Sport & Outdoors
4
4.0
Mar 13, 2021
03/21
by
Taras Kushnirenko (Kushnirenko)
data
eye 4
favorite 0
comment 0
Adapter for my second airbrush Created at theOpenScad and can be converted to Customizer, but use some external library: - threadlib https://github.com/adrianschlatter/threadlib - threadprofile https://github.com/MisterHW/IoP-satellite/tree/master/OpenSCAD%20bottle%20threads - scad-utils https://github.com/openscad/scad-utils - list-comprehension-demos https://github.com/openscad/list-comprehension-demos **Lifehack**: I coated the threads on the plastic adapter with dichloroethane glue....
Topics: adapter, thingiverse, Parts, Airbrush, adaptor, airbrush_adapter, stl, airbrush_adaptor
0
0.0
Aug 16, 2022
08/22
by
Steve Sherwood (stampydriver)
data
eye 0
favorite 0
comment 0
This small adaptor allows the use of a Screwfix Titan Vac on a Dwalt sander. You will need to purchase a Dewalt DWV9000-XJ Universal Adapter and this adaptor will fit inside. This will allow the vac nozzle to push fit in the adaptor for constant dust removal. I test printed in PLA and it's designed to print without supports. You will need to re-orient the model in the slicer so that it's vertical.
Topics: stl, thingiverse, adaptor, DIY
7
7.0
Mar 17, 2021
03/21
by
APTEM Maker (APTEM_Maker)
data
eye 7
favorite 0
comment 0
Hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay V2 compact: https://www.thingiverse.com/thing:3383695
Topics: 2.5, Bracket, computer, SSD_Adapter, hdd, caddy adaptor, ssd, ssd_adaptor, adapter, Computer,...
4
4.0
Mar 24, 2021
03/21
by
Heiko Steinwender (stonehome)
data
eye 4
favorite 0
comment 0
This is a 2.5" SSD/laptop HDD adapter. Its purpose is to fit a 2.5" HDD/SSD into a 3.25" hot swap bay. This adapter is providing the shape and connections of a 3.25" HDD to any 3.25" slot including screw holes (where possible). Therefor you can use it in any 3.25" slot although its main purpose is to adapt a 2.5" device to a 3.25" hot swap bay. Changes to the original: better ventilation of the HDD and less filament required.
Topics: stl, mount, Computer, HDD_Adapter, thingiverse, hdd_adaptor, ssd_mount, adapter, HDD_mount, ssd,...
4
4.0
Apr 1, 2021
04/21
by
Roman Ortner (Ninto1)
data
eye 4
favorite 0
comment 0
This project is an adaptor for the bottle holder in your car. My dad complained that his tins would always fall over if he put them there, so I made it.
Topics: 3D_printing, car,, bottle holder, tin adaptor, thingiverse, can, tin, Tool Holders & Boxes, can...
3
3.0
Jan 20, 2021
01/21
by
Carl Arney (Cargy)
data
eye 3
favorite 0
comment 0
I've been using Tunnelcake's simple 5015 fan adaptor for a while now, and it works extremely well - even allowing for the MicroSwiss hotend on my Ender 3. But there is one niggle with it that drives me bonkers: Every so often the fan body collides with the X-Belt mounting screw. When this happens, it has a nasty habit of dislodging the fan away from the duct, thereby reducing (or even preventing) the part cooling airflow. I've been hoping that Tunnelcake would read his comments regarding the...
Topics: 3D Printer Accessories, thingiverse, Fan connector, Angle adaptor, Fan adaptor, stl
5
5.0
Mar 13, 2021
03/21
by
Gauthier LE ROUZIC (gauthierlerouzic)
data
eye 5
favorite 0
comment 0
https://nozzler.fr Adaptor for vacuum cleaner. Can be used on other brand maybe, tried on Henry Numatic https://nozzler.fr
Topics: adapter, thingiverse, tube adaptor, vaccum_tube, vacuum adaptor, vacuum_cleaner, vacuum, adaptor,...
4
4.0
Mar 15, 2021
03/21
by
Andre Buschmann (andrebsch)
data
eye 4
favorite 0
comment 0
An Adapter to connect Miele vacuum accessories to the osVAC System. It works also with the accessories of my Bosch Home Professional vacuum cleaner. I've also add the Fusion 360 file for customization.
Topics: thingiverse, osvac, Bosch_vacuum_adaptor, Vacuum_Adapter, stl, Tools, miele_vacuum_adaptor
6
6.0
Mar 17, 2021
03/21
by
SELFMADE KINK (selfmadekink)
data
eye 6
favorite 0
comment 0
Simple adaptor with male and female gasmask thread. It has a hole so you can insert some special air or liquids. Can be printed without any support. As you can see i still have some problems with underextrusion. Please note: Even if all threads schould be the same i found out that there are sometimes a few really small deviations. I have tried this version on all of my ten masks and a few differend tubes and it fits. But maybe there are some other versions that dont fit that well.
Topics: gas_mask, gasmask_adaptor, gasmask, adapter, stl, adaptor, thingiverse, 28mm, Other
3
3.0
Mar 13, 2021
03/21
by
Jurriaan Pruis (jurriaanpruis)
data
eye 3
favorite 0
comment 0
Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6)
Topics: adapter, thingiverse, 45rpm_adapter, 45RPM_Adaptor, Audio, adaptor, Vinyl_Record, stl, 45rpm
From the bitsavers.org collection, a scanned-in computer-related document. bit3 :: BIT3 406 PC-AT VME Apr89
Topics: vmebus, adaptor, address, ram, interrupt, remote, node, jumper, vmebus adaptor, adaptor card,...
6
6.0
Jan 21, 2021
01/21
by
Benjamin Markowitz (bpmarkowitz)
data
eye 6
favorite 0
comment 0
Remix that takes the narrow section out the neck of the Schrader part of the adaptor which was a weak point and kept breaking on me, added a slight chamfer to increase strength.
Topics: adaptor, Outdoor & Garden, stl, thingiverse
5
5.0
Apr 4, 2021
04/21
by
Luke Hefson (lukehefson)
data
eye 5
favorite 0
comment 0
This little adaptor is for keeping an Olloclip (which was made for the iPhone 4/4S) snug against an iPhone 5.
Topics: thingiverse, adaptor, Camera, camera, stl
0
0.0
Aug 16, 2022
08/22
by
Michael Edmonston (helponhand)
data
eye 0
favorite 0
comment 0
I designed this to sit between a GoPro Helmet mount and the Schuberth C4 crash helmet. Using 3M double-sided VHB tape. Profiled to fit the helmet chin bar and sculpted to fit the Gopro Mount, giving maximum adhesion. This is just the piece that sits between the helmet mount and the helmet. It is a good fit both vertically (as photographed) or horizontally (turned sideways on).
Topics: shuberth gopro mount, Scuberth C4, Shuberth adaptor, stl, thingiverse, C4 gopro adaptor, Camera
4
4.0
Jan 6, 2021
01/21
by
Toma (t0kar)
data
eye 4
favorite 0
comment 0
This is the adapter to fit SSD inside the iMac 24 from early 2009. I used PETG, because of temperatures inside enclosure. PH1 M3x16mm bolts are used to fit the SSD.
Topics: stl, Computer, hdd, adaptor, ssd_adaptor, adapter, thingiverse, early_2009, imac, ssd_mount
3
3.0
Apr 21, 2021
04/21
by
Jens Henrikson (jehe79)
data
eye 3
favorite 0
comment 0
Simple adaptor board for mounting a normal AIO whoop flightcontroller on the Tinyhawk Freestyle frame. Lid is for mounting extra gear on top of whoop like rx and vtx.
Topics: thingiverse, stl, tinyhawk freestyle, R/C Vehicles, adaptor, emax_tinyhawk, tinyhawk adaptor,...
1
1.0
Apr 20, 2022
04/22
by
Maou Kiero (Coremaster)
data
eye 1
favorite 0
comment 0
This is a case for the currently available Inateck M.2 adaptors that support PCIE+SATA M.2 drives. It must be the variant with the short PCB. Normally the adapter supports 2280 drives and doesn't support the 2230 drives, because the case doesn't have mounting for these. So I made this tiny case for for 2230 drives only. Please use low power drives only, as there is no cooling. SSDs like the Kioxia BG4 are the max when it comes to power usage. The BG4 gets 76C under max load, that is still safe...
Topics: 2033, thingiverse, ssd, tiny, Computer, NGFF, ssd_adaptor, stl, Inateck, adaptor, small
Topics: manualzz, manuals, DAB+ Adaptor, argon audio user manuals, argon audio service manuals, DAB+...
4
4.0
Mar 22, 2021
03/21
by
PHILIP WATERS (Greek365)
data
eye 4
favorite 0
comment 0
Fan adapter for shaded pole fan motor, part is re-purposed from a scrap part. used to blow extra air into a metal melting furnace. see https://www.youtube.com/watch?v=pFTJpW8AZpk
Topics: Parts, stl, adaptor, Fan, thingiverse
0
0.0
Aug 14, 2022
08/22
by
Steven Lindig (GreenDragon34)
data
eye 0
favorite 0
comment 0
USB Adaptor for large hole
Topics: stl, 3D Printing, thingiverse, adaptor
6
6.0
Mar 12, 2022
03/22
by
Sweex
data
eye 6
favorite 0
comment 0
The CD that comes with the Sweex US103 PCMCIA to USB 2.0 Adaptor. Contains only the manual. Note: No drivers are needed, and it works plug and play on (at least) Windows XP and Debian 11.
Topics: Adaptor, PCMCIA, USB2, USB, USB2.0
9
9.0
Mar 9, 2021
03/21
by
Shape Scribe (Shapescribe)
data
eye 9
favorite 0
comment 0
Dust collector flange adapter for 4 inch or 100 mm flexible ducting. Allows you to terminate a length of ducting at a flat panel or bulkhead.
Topics: 100mm, stl, thingiverse, adaptor, DIY
3
3.0
Jan 8, 2021
01/21
by
Bruno Leite (brunosl)
data
eye 3
favorite 0
comment 0
This is my simple version for 7 " vinyl adapter Enjoy the spiral loop :)
Topics: Audio, Vinyl_Record, stl, 7inch_adaptor, 7_inch_vinyl_adapter, thingiverse, Vinyl_Adaptor
5
5.0
Apr 20, 2021
04/21
by
Mawi Rulez (MawiMakes)
data
eye 5
favorite 0
comment 0
A remix of the Y mini gantry adaptor by @kakou_fr Enlarged the M5 screw holes to make the right clearance Inner diameter 5.2mm, Outer diameter 10.2mm Added some height to cover the entire head screw (i use classic rounded head screws) so it can be smashed to the Y plate without any issue. Removed Middle larger hole because personally i find it useless and it add just more weight to the axis with another screw. hardware used: M5x8/10mm x4 M4 nuts x4 M4x 12mm (with 6mm Y plate, calculate that...
Topics: thingiverse, 3D Printer Parts, stl, Mini-gantry, Y-Axis, y_adaptor, Adaptor
Aztech WL552USB: WIRELESS-N USB 2.0 ADAPTER RESOURCE CD VERSION 1.0 Aztech WL552USB: WIRELESS-N USB 2.0 ADAPTÖR KAYNAK CD VERSİYON 1.0 Türkçe Döküman, Driver ve Yazılımı Turkish manual, Driver and Software
Topics: aztech, driver, network, adapter, adaptör
3
3.0
Mar 25, 2021
03/21
by
Bhaskar Bandaru (BhaskarBan)
data
eye 3
favorite 0
comment 0
I want to put the Wifi adaptor in the Wall Metal gang box. With very little room and I have to connect the Adapter Plug male pins to My house Live and a neutral wire. It can achieve a clean install with no visible leads. This solution worked for me. Maybe It can help you too. Let's give it a shot and let me know. Post your make. That makes me feel happy and keep doing more of these designs. Disclaimer: While connecting to the mains take extreme caution to avoid electric shock. Try not to...
Topics: stl, Parts, adaptor sockets, thingiverse
generalmanual 000041751
Topics: modem, usb, adaptor, telephone, les, pas, des, est, compatible, cable, modem adaptor, area code,...
10
10.0
Jan 18, 2021
01/21
by
Ryan Woodham (riversmoke)
data
eye 10
favorite 0
comment 0
Solution: A mount plate to shift your 100mm VESA-mount monitors by 40mm. Problem: I bought 3 monitor/arm stand and the arms weren't quite long for my monitors. This mount plate offsets the side monitors by 40mm's fixing the bevel edges of the monitors from overlapping. Designed in OpenJSCAD (what, I like JS) I included the source so you can tweak it. The 100mm VESA spacing and 40mm offset are variables you can tweak along with a few others. Two prints of this has supported my two 27"...
Topics: monitor_adaptor, Computer, stl, thingiverse
From the bitsavers.org collection, a scanned-in computer-related document. bit3 :: BIT3 467-1 SBUS VME Dec93
Topics: adaptor, vmebus, dma, sbus, address, interrupt, remote, controller, adaptor card, dma controller,...
3
3.0
Jan 8, 2021
01/21
by
Jake DeGuzman (jakelynpot)
data
eye 3
favorite 0
comment 0
Iphone 10 holder for Mercedes Benz E-350. This is excellent to put in a dashboard if you use your iphone for navigation.
Topics: I-phone, 3D Printing, stl, mercedes holder, adaptor, Holder, cellphone adaptor, thingiverse,...
Atari 2600 Manual: Atari 2600 (1986)(Atari)(US)
Topics: antenna, switch, atari, cable, coaxial, vhf, game, adaptor, plug, console, switch box, power adaptor
2
2.0
Nov 8, 2021
11/21
by
Corey Lawson (CoLa004)
data
eye 2
favorite 0
comment 0
Utilize with: 16 oz (~500 mL) "Tall Boy" Yeti Perfect fit with the 16 oz Yeti. I cannot confirm the fitment with other brands of can insulators. - 12 oz (355 mL) regular can: adapter slips inside the Yeti and the regular-sized can sits on top for a snug fit to the threaded gasket - 12 oz (355 mL) slim can: adapter slips over the top of the slim can for a snug fit to the threaded gasket when the can is inserted inside the Yeti **I am not affiliated with Yeti in any sense of the manner**
Topics: Other, stl, yeti adaptor, thingiverse
3
3.0
Jan 7, 2021
01/21
by
Pascal Young (Pascal32)
data
eye 3
favorite 0
comment 0
adapts the lockline 2-1/2" to 3" adaptor to fit a 4" hose. perimeter walls are 1.6mm which is a multiple of the .4 mm extrusion I'm using - if you enable the simplify3D -> advanced -> internal thin wall to "allow single extrusion fill it will print solid. I didn't see a reason to go thicker though you can. fusion360 file is included! http://modularhose.com/Loc-Line-25-ID-System/25-Adapters/Loc-Line-81207.html
Topics: stl, Hobby, adaptor, thingiverse, lockline
Journal of Research of the National Bureau of Standards
Topics: Adaptor, connector, efficiency, sliding short
4
4.0
Mar 5, 2021
03/21
by
Scott May (ScottTheFalcon)
data
eye 4
favorite 0
comment 0
I like to make sure I'm visible while riding my motorcycles. On my touring bike - more lights on the front, and extra brake lights on the back, that run a short flash cycle when activated. But on my little sports bike not so easy. I found some cool 10mm mini indicators on eBay that were multipurpose. The front indicators were daylight running lights when the yellow LED wasn't flashing. The rear could be tail or brake lights when the yellow LED wasn't flashing. Sounds close. Suzuki indicators...
Topics: Automotive, stl, adaptor, motorcycle, thingiverse
4
4.0
Mar 8, 2021
03/21
by
Hans Schulz (schulzha)
data
eye 4
favorite 0
comment 0
I've bought this board to adapt an M.2 SSD to a U.2 Cable: https://www.amazon.de/gp/product/B072BXHQ4J It was by far the cheapest board with Prime delivery, but it had no case, it was just the bare PCB. So I made one myself! The PCB is held in with plastic "rivets". Put the PCB on, heat up the rivets and press them flat. You can find the Fusion360 project here: https://a360.co/2HlhFxR
Topics: Electronics, ssd_adaptor, stl, thingiverse, computer
8
8.0
Jan 15, 2021
01/21
by
FilaworKs (FilaworKs)
data
eye 8
favorite 0
comment 0
This is a Adapter For Plug Type E - CEE7/5 French
Topics: thingiverse, Household Supplies, plug_adaptor, stl
5
5.0
Mar 16, 2021
03/21
by
Udo Malzer (umalzer)
data
eye 5
favorite 0
comment 0
I made this holder to keep my XT60 connectors in order. Male and female connectors can be plugged in. The slots are rectangular and passing through so that connectors can be inserted in any position from the front and rear. With the back of the STL model placed on the printer bed, the holder can be printed without supports.
Topics: thingiverse, adaptor, XT60, Electronics, stl, holder
3
3.0
Jul 3, 2021
07/21
by
Mike Overbay (Coffee_)
data
eye 3
favorite 0
comment 0
Simple pipe end plug to mount a microphone boom on the top of a dual monitor stand. It should work will all tubes that are 1 3/8 in diameter and nearly all table clamp boom arms on Amazon. You will need to deburr the tube before pushing this in. A round file works best. My boom... 1/2 diameter at table clamp end. Most of these booms will work. https://www.amazon.com/InnoGear-Microphone-Suspension-Adjustable-Snowball/dp/B01L3LL95O My Monitor Stand... 1.38 OD vertical tube. Most are this size....
Topics: Computer, thingiverse, stl, Mic Boom Adaptor
Journal of Research of the National Bureau of Standards
Topics: Power measurement, power calibration, adaptor efficiency
5
5.0
Mar 18, 2021
03/21
by
Ross Barber (theboyrossy)
data
eye 5
favorite 0
comment 0
Extended Mag release trigger for easier operation with the Knuckleduster hand guard. - Update Added a shorter version too, I originally made this for my Non-Knuckleduster uKaliburn but thought it may be useful for others.
Topics: Sport & Outdoors, stl, adaptor, thingiverse, nerf
