6
6.0
Jan 21, 2021
01/21
by
Iván Peñafiel (dante81358)
data
eye 6
favorite 0
comment 0
Es un boton del estrusor en donde se coloca el hilo
Topics: anet_a8_mods, 3D Printer Accessories, stl, thingiverse
3
3.0
Apr 4, 2021
04/21
by
Samuel LJ (elmove66)
data
eye 3
favorite 0
comment 0
Soporte para motor electrico de 12V el diametro del motor es de 27mm
Topics: thingiverse, 3D Printer Parts, anet_a8_mods, stl
7
7.0
Jun 21, 2021
06/21
by
roger whiteley (rcw88)
data
eye 7
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5VdQVqhessH Inspired by this LED Bracket by https://www.thingiverse.com/Funny62 https://www.thingiverse.com/thing:2687367 which works with the "Mistral 2.1" Extruder Cooling Duct for the Anet A8 Printer by Leo_N, https://www.thingiverse.com/thing:2121279 - which was my first successful print. And this sensor bracket by chelrix, https://www.thingiverse.com/thing:1874774 Thank you to you guys for sharing...
Topics: stl, thingiverse, 3D Printing, anet_a8_mods
6
6.0
Jan 21, 2021
01/21
by
Scott Alfter (salfter)
data
eye 6
favorite 0
comment 0
I bought a couple of these recently (in the "20T ID3 OD18 W6" variety, though in hindsight maybe the "16T ID3 OD13 W6" variety may have been more appropriate) to replace the pairs of bearings the A8 uses as belt idlers: https://www.aliexpress.com/item/GT2-Idler-Timing-Pulley-16-20-Teeth-Passive-Synchronous-Wheel-Bore-3mm-5mm-Aluminum-Timing-Pulley/32817701071.html?spm=a2g0s.9042311.0.0.75d04c4dKwhA35 I put one on the Y-axis tensioner (https://www.thingiverse.com/make:520391)...
Topics: anet_a8_mods, 3D Printer Parts, stl, thingiverse
5
5.0
Mar 18, 2021
03/21
by
Thomas DDDD (Thomasfudge1)
data
eye 5
favorite 0
comment 0
a long endstop
Topics: anet_a8_mods, stl, 3D Printer Parts, thingiverse
4
4.0
Apr 5, 2021
04/21
by
Carsten Komnik (drckone)
data
eye 4
favorite 0
comment 0
deutsch: ----------- *Anheben des Druckbettes um 12mm* Bei dem Umbau des Anet A8 auf PK8 (Aluminium Rahmen) musste ich feststellen, daß das Druckbett gegen den Riemenspanner der Y-Achse stieß. Dadurch gingen ca. 30mm Verfahrweg verloren. Durch anheben der Druckbettes steht dieser Verfahrweg nun wieder zur Verfügung Benötigt werden: - 4x Platte Wagen - 1x Platte Riemenspanner english: ----------- *Lift the bed by 12mm* When I rebuilt my Anet A8 to PK8 (alumnium frame), i figured out, that...
Topics: thingiverse, anet_a8_mods, PK8, stl, 3D Printers
9
9.0
Jan 13, 2021
01/21
by
Irwin Ng (SolidPrototype)
data
eye 9
favorite 0
comment 0
I have installed the H plate upside down with the tutorial video, so when I applied the Y axis cable chain there is a problem which is the chain will coming up when 'home' and the nozzle will hit the chain and jam. This is a parts to secure the Y axis Cable Chain in place below the level of nozzle.
Topics: 3D Printer Accessories, thingiverse, anet_a8_mods, stl
9
9.0
Jan 16, 2021
01/21
by
Graham Kirkman (Kaptan_GAK)
data
eye 9
favorite 0
comment 0
This is a minimal mounting bracket for a 3D touch on an Anet A8. The bracket attaches to the top left of the X-axis bearing and fits between the fan and the X-Axis rails. I used a couple of zip ties to hold the 3D touch wires out of the way. For me the offset for the 3D touch was (-22mm, 22mm)
Topics: anet_a8_mods, 3D Printer Parts, stl, thingiverse
8
8.0
Jan 20, 2021
01/21
by
Max menne (Get_live_tv)
data
eye 8
favorite 0
comment 0
This is for a Bowden setup if you for what ever reason have to have it stand up or you just don't want it getting held hostage by zip ties it works good.
Topics: anet_a8_mods, 3D Printer Accessories, stl, thingiverse
4
4.0
Mar 10, 2021
03/21
by
Peter Three (tinker3dmodel)
data
eye 4
favorite 0
comment 0
Another 'ThumbScrew' for the HotBed, those I have viewed seemed to be a little narrow to hold so I have increased the depth to enable the user to have better grip. thing:2350276 was the original wheel I used so thanks to Area51 Manual bed leveling the Anet A6/A8 can be awkward so to make it easier use a ThumbScrew. There are some good solutions around - I made modifications and tried to keep it simple.
Topics: stl, thingiverse, 3D Printer Parts, anet_a8_mods
4
4.0
Apr 24, 2021
04/21
by
Ricky Field (RDF300)
data
eye 4
favorite 0
comment 0
TLDR: Remixed from a couple of STL files using Tinkercad I have made my vbersion of a 8mm (PINDA) probe mount for the hot end carriage of a Anet A8. Long Version: After Upgrading my printer from a ANET A8 to a AM8, I then swapped out the motherboard and rewired the printer for a EINSY RAMBO turning my printer into a EINSY AM8. Swapped the hot end fan and Part cooling fan with Prusa MK3 Parts (brought from Prusa). I now would like to install a PINDA probe. I found Designs for a 8MM version of a...
Topics: stl, 3D Printer Parts, anet_a8_mods, thingiverse
5
5.0
Mar 3, 2021
03/21
by
Jordi Escrich (gordopu)
data
eye 5
favorite 0
comment 0
Soporte para el final de carrera del eje x con los soportes invertidos.
Topics: thingiverse, 3D Printer Parts, anet_a8_mods, stl
9
9.0
Jan 11, 2021
01/21
by
Roberto Jorge (RojoTresD)
data
eye 9
favorite 0
comment 0
Ésta modificación de consiste en que mantiene los rodamientos lineales de las barras originales de 15mm de diámetro exterior. (los de origen de la máquina). Aún no los he impreso. Si alguien decide hacerlo, agradecería cualquier comentario o posible modificación. El eje X left tiene version "V3b" sin soporte para finde carrera.
Topics: 3D Printer Parts, thingiverse, anet_a8_mods, stl
8
8.0
Jan 17, 2021
01/21
by
Hans Thüring (hthuering)
data
eye 8
favorite 0
comment 0
Anet A8 probe holder for 12mm capacitive probe. Mounted as the original Anet probe on the back of extruder. ATTENTION!!! The max z-hight will decrease to 210mm. Otherwise the Probe is crashing to the frame.
Topics: anet_a8_mods, 3D Printer Parts, stl, thingiverse
9
9.0
Apr 17, 2021
04/21
by
Joao Duarte (joaoduarte)
data
eye 9
favorite 0
comment 0
Remixed from https://www.thingiverse.com/thing:2087761. I din't like the letters on the side so I removed them.
Topics: 3D Printer Accessories, thingiverse, anet_a8_mods, stl
11
11
Jan 14, 2021
01/21
by
Stefan Bosch (meneerhout)
data
eye 11
favorite 0
comment 0
I remixed this design because i had a 50x50x10mm fan laying around that i wanted to use.
Topics: 3D Printer Accessories, thingiverse, anet_a8_mods, stl
11
11
Jan 18, 2021
01/21
by
Giovanni Marletta (GiovanniMarletta)
data
eye 11
favorite 0
comment 0
below this english text Questo è uno dei miei primi oggetti 3d, forse può essere perfezionato? forse, lo lascio come è per il vostro spasso. È stampato con un anet a8, di serie. L'ho interamente creato con tinkercad dopo aver visto molte alternative sul web e specialmente qui. I binari tengono la striscia (solo 3 led), i due fori all'estremità servono per fermare la striscia e il suo cavo di alimentazione con una fascetta per cavi. I due mozzi posteriori sono da inserire nei fori nella...
Topics: anet_a8_mods, 3D Printer Accessories, stl, thingiverse
3
3.0
Apr 27, 2021
04/21
by
Zdenko Viskup (Biskup)
data
eye 3
favorite 0
comment 0
Short E3D v6 extruder and feeder with bondtech wheels.
Topics: 3D Printer Parts, anet_a8_mods, stl, thingiverse
7
7.0
Jan 19, 2021
01/21
by
Mikael Hanzon (hanzon)
data
eye 7
favorite 0
comment 0
a Anet A8 - Dremel Flex holder, just a simple dremel milling addon The tensioner is a mix from: X-Belt Fixer-Tensioner - https://www.thingiverse.com/thing:2453683
Topics: anet_a8_mods, dremel_holder, thingiverse, Tools, dremel, stl
8
8.0
Jan 20, 2021
01/21
by
Scott Alfter (salfter)
data
eye 8
favorite 0
comment 0
The original frame mount design didn't line up right with my frame (there have been changes to the A8's frame design throughout its production run), so I designed a new one by starting with a chain link and building it up from there. The initial installation had the cabling into the bed routed too high, cutting into my usable print area (especially with a 3DTouch on the left side of the carriage). I got some more room for the wiring by removing the plug body and shrink-wrapping the individual...
Topics: anet_a8_mods, 3D Printer Parts, cable_management, thingiverse, stl
7
7.0
Apr 18, 2021
04/21
by
Kevin Welsby (Hawkboss)
data
eye 7
favorite 0
comment 0
Clamps for the base to retain studding. Ensures the front stays down and the studding does not slip in the centre slots. On assembly rotate the studding so the front rests on your table, clamp up nuts rear front and then evenly around clamp
Topics: 3D Printer Parts, thingiverse, stl, anet_a8_mods, prusa_i3
10
10.0
Jan 14, 2021
01/21
by
quinten barker (Alcatos)
data
eye 10
favorite 0
comment 0
Fan mount to cool the mainboard for the Anet A8. Mount set for an 80mm computer fan, seats fine on the arm without hardware but will need a screw or bolt to fasten the fan on and it has an optional area to bolt to the arm. Probably compatible with hardware sent by manufacturer of printer. Might need to sand a bit to get it to fit right over hole* I actually used an led fan so i could tell if the cooling system was running really easily.
Topics: thingiverse, 3D Printing, stl, Anet_A8, anet_a8_mods
3
3.0
May 21, 2021
05/21
by
Scott Alfter (salfter)
data
eye 3
favorite 0
comment 0
The original part was a bit difficult to get the nut in the trap due to the hole printing too small, and once I had it in the printer and tightened down, the pulley mount cracked. I've made it 1.5 mm larger at top, bottom, and left, the nut trap is enlarged 0.5 mm so that it's less likely you'll crack that end of the tensioner getting the nut in, and the hole for the tensioner bolt goes all the way through.
Topics: 3D Printer Parts, thingiverse, stl, am8, anet_a8_mods
4
4.0
Mar 25, 2021
03/21
by
Klaus Feldner (klausfeldner)
data
eye 4
favorite 0
comment 0
I thought to myself, it doesn't always have to be complicated. Anet A8+ owners know that the Power Supply fan constantly blows air towards or over the print bed as well as the print object. Yes, of course there are already ideas for it, but I wanted to be able to attach it simply and without great effort. My airflow is very simple but effective. I simply glued the part to the power supply with double-sided adhesive tape, because as long as the power supply works there is no reason to remove it...
Topics: stl, PSU, thingiverse, anet_a8_mods, 3D Printer Accessories
4
4.0
Jun 6, 2021
06/21
by
The Gonz (TheAussieGonz)
data
eye 4
favorite 0
comment 0
Have fun and make your Anet A8 recognisable with this balance logo for your part cooling fan.
Topics: thingiverse, fan_duct, 3D Printer Parts, stl, anet_a8_mods
3
3.0
Jan 6, 2021
01/21
by
stephen collins (IanMoone89)
data
eye 3
favorite 0
comment 0
Dual 12v to 24v LED strip holder for Anet A8 Plus. This version adds a second strip of LED's for more direct light on the nozzle. and also allows for the user of dual 12v strips to be wired in series and ran at 24v from the printer's in-built power supply.
Topics: stl, Led_Holder, anet_a8_mods, thingiverse, 3D Printer Accessories
7
7.0
Jun 10, 2021
06/21
by
Pete Cervasio (telanoc)
data
eye 7
favorite 0
comment 0
This is the X carriage from the Prusa I3 Mk2s github which has been modified to use the 46mm rod spacing of the Anet A8 instead of the regular 45mm. This should allow someone to print out the Prusa Mk2s extruder assembly and use it with the A8. Prusa's files are at https://github.com/prusa3d/Original-Prusa-i3 but make sure you have the MK2 branch selected. 25 March 2018: I uploaded a new .scad and .stl file. After printing a test version or three, I got the spacing right (for my printer, at...
Topics: anet_a8_mods, 3D Printer Parts, thingiverse, Anet_A8, stl
9
9.0
Jan 17, 2021
01/21
by
Kirk Willmann (smoothdog001)
data
eye 9
favorite 0
comment 0
I soldered my wires directly to the heated bed after the connector burned up, but the wires still occasionally broke loose from the bed due to stress. I tried a cable chain but it still created stress at the end of the movement. Most of the other options I found required attaching directly to the heated bed or rotating the bed causing clearance issues unless I resoldered everything. I whipped this up in tinkercad and it attaches to the cross brace below the bed. I used PETG to print, ABS should...
Topics: anet_a8_mods, 3D Printer Accessories, Anet_A8, thingiverse, stl
9
9.0
Jan 16, 2021
01/21
by
Nick French (Muddydisco)
data
eye 9
favorite 0
comment 0
Fan cover to look like jet engine will work with most 50 mm blower type fans Anet A8 etc Added V2 thicker mounting plates, will possibly need longer bolts if using on a stock Anet setup Also Added a Rounded nose Version
Topics: anet_a8_mods, 3D Printer Accessories, Anet_A8, thingiverse, stl
7
7.0
Jan 19, 2021
01/21
by
Robert Sanchez (revensanchez)
data
eye 7
favorite 0
comment 0
This covers the holes in the Anet A6's frame if you have routed your cables somewhere else and have them empty. There is a plain version and another decorated with a hexagon pattern. These print really fast and don't use a lot of material.
Topics: anet_a8_mods, 3D Printer Parts, anet_a6, thingiverse, stl
8
8.0
Apr 17, 2021
04/21
by
Mat E (E-Mat)
data
eye 8
favorite 0
comment 0
***ANET A8 - EXTENDED VERSION 220x280mm!*** There is an easy and inexpensive way to increase the build space on your Anet A8 by 60mm. It is possible to directly install a larger 220x280mm heatbed on the A8 printer, the screw locations are identical, so the bed will fit directly on the stock heatbed carrier, but to utilize its larger dimensions, the rear plate must be moved backwards so longer y-bearing rods (450mm) as well as longer M8 rods can be installed, which are both necessary to get...
Topics: Anet_A8, 3D Printer Parts, thingiverse, stl, anet_a8_mods
9
9.0
Jan 12, 2021
01/21
by
(JuanCarlos_3design)
data
eye 9
favorite 0
comment 0
https://youtu.be/ufmRKWlr6_8 Versión 2.0 de la syncronización de los motores del eje Z, en este caso con 1 solo motor. Necesitaremos de la versión 1.0: * Correa GT2 860mm * 2 poleas GT2 8mm 20 dientes * 2 rodamientos KFL08 * Piezas impresas superiores: http://www.thingiverse.com/thing:2097301 Para la versión 2.0 necesitamos: * Esta pieza impresa * Arandelas métrica 3 * 2 tornillos avellanados M5x12mm * 4 rodamientos F688ZZ con borde * 1 Polea GT2 20 dientes - eje 6mm para motor nema17...
Topics: thingiverse, stl, 3D Printer Parts, ANET A8, anet_a8_mods
9
9.0
Apr 17, 2021
04/21
by
Ellis Dee (EllisDee)
data
eye 9
favorite 0
comment 0
Anet A8 Double Heat Bed At first i have to say thanks to SmallArtFly for making the Anet A8 frame in useable CAD files All links are just samples Warning!!! not possible with 20A Power supply you will smoke it up you need around 30A for this. Every Heat bed has 10A and start to use mosfet boards, its not useful to send so much ampere over the Mainboard Also i suggest you to solder the wires directly onto the heat bed, my plug smoked up. as far as i know, they all do sooner or later. for second...
Topics: 3D Printer Parts, thingiverse, stl, Anet A8, anet_a8_mods
3
3.0
Mar 19, 2021
03/21
by
Tomasz Kowalkowski (Coval_pl)
data
eye 3
favorite 0
comment 0
This is my design of extruder cooling fan mount combined with Garage Makezone Hallon v3 sensor. This mount has radiator's bottom cover to not cooldown heating block and hallon sensor mount in exactly the same relative place as original mount designed by GMZ. I recomend printing it in horizontal orientation with hallon mount using supports of course.
Topics: anet_a8_mods, thingiverse, HallON_v3, 3D Printer Parts, stl
3
3.0
Apr 24, 2021
04/21
by
riag riag (riag)
data
eye 3
favorite 0
comment 0
I took AleksBozovic's design and reduced the height a little bit. Because I got a new surface for the heatbed which is a little bit thicker, I had to move the hotend up. the original fan nozzle and the one from AleksBozovic did touch the heatbed, so I threw it into solidworks and made three version 2/3/4 mm shorter. Works great, thanks for the original design. I had far better print results after I activated "bridges" in cura settings.
Topics: 3D Printer Parts, thingiverse, stl, Anet_A8, anet_a8_mods
10
10.0
Apr 17, 2021
04/21
by
Chris Britton (MisterSir72)
data
eye 10
favorite 0
comment 0
added skull decoration to extruder fan cover by hadoko from Tech_Junkie fan cover. I think this will help protect the outside of the fan better than the wire shield that came with it.
Topics: 3D Printing, thingiverse, stl, anet_a8_mods, extruder fan cover
6
6.0
Jan 21, 2021
01/21
by
Gerardo Gomez Vargas (gergomvar)
data
eye 6
favorite 0
comment 0
This is my version of a Mainboard Fan cover for a 3D Printer Anet A8, enjoy it!!
Topics: anet_a8_mods, 3D Printer Accessories, Anet_A8, thingiverse, stl
9
9.0
Jan 14, 2021
01/21
by
Remko van Nunspeet (remkon)
data
eye 9
favorite 0
comment 0
Still a work in progress! A mount for the stock Anet board to fit it in the CD-rom slot of a Desktop PC casing to give easy access to the microSD slot and USB-A port. I have not yet printed this thing myself and my modeling skills in Blender are moderate at best so don't expect it to fit without adaption.
Topics: thingiverse, stl, 3D Printer Accessories, Anet_A8, anet_a8_mods
4
4.0
Mar 5, 2021
03/21
by
ian hickey (Ionatomic)
data
eye 4
favorite 0
comment 0
AM6 ==================== I turned my Anet into the AM6 over the course of a couple weeks. The black filament parts in the photos were printed on the A6, the silver PLA photos on my Prusa MK3S. The most noticeable differences are, no more ghosting and I can print quite a bit faster. Marlin 1.9 --------------------- In addition to the Am6 frame, I've updated to Marlin 1.9. On Marlin, I've enabled linear advance 1.5 (this is huge for print quality), turned on s-curve, and junction deviation. I...
Topics: stl, 3D Printers, AM6, anet_a6, anet_a8_mods, AM8, thingiverse
4
4.0
Mar 22, 2021
03/21
by
erik martin (eloverphx)
data
eye 4
favorite 0
comment 0
I had some wheels for another build and wanted to try to use some of the existing parts from my am8 and see if i can get better print quality from it.
Topics: anet_a8_mods, stl, 3D Printing, anet_a8_upgrade, thingiverse
3
3.0
Jun 7, 2021
06/21
by
Alexandre Pinheiro (apinheiro)
data
eye 3
favorite 0
comment 0
I upgraded my ANET a8 to [EMT8 frame](https://www.thingiverse.com/thing:2818084) and made this rod holders. This is made for 25.4mm tube, you can scale it to use on other dimensions. (please comment the scale that you use for your tube.) UPDATE: Added emt_rod_holder_back_8.6.stl and emt_rod_holder_front_8.6.stl with more tolerance in rod hole, 8.6mm instead 8mm
Topics: anet_a8_mods, thingiverse, 3D Printer Parts, stl, EMT8, EMT
13
13
Jan 16, 2021
01/21
by
Ray Howard (Phireside)
data
eye 13
favorite 0
comment 0
Design based heavily on https://www.thingiverse.com/thing:1688209 fan mount is for a 40 mm fan https://youtu.be/VQbpoy5zWj4 https://www.youtube.com/watch?v=61w_8wIJLBk https://www.youtube.com/watch?v=K_dj-pAZWIk
Topics: thingiverse, stl, 3D Printer Parts, anet_a8_mods, laser_engraver
9
9.0
Jan 13, 2021
01/21
by
John Waclawski (Cowski)
data
eye 9
favorite 0
comment 0
The original nut cap design wasn't deep enough. I tossed this into Fusion 360 and with some gentle persuasion I managed to make it about 10mm deeper to account for the threaded rod coming through my nut on my ANET A8. Fits a big snug but fits nonetheless. Update v1 is 12mm deep. v2 is 16mm deep. If you need it any deeper or it modded, please let me know & I'll see what I can do for you. Thanks!
Topics: thingiverse, stl, 3D Printer Accessories, Anet_A8, anet_a8_mods
10
10.0
Jan 13, 2021
01/21
by
Brett Snyder (i3dKC)
data
eye 10
favorite 0
comment 0
My Son's idea, my design. Just added the "funnel" insert. Haven't tried it yet. The feed through is 2mm, should help eliminate looping and tangles.
Topics: thingiverse, stl, 3D Printer Accessories, filament_guide, anet_a8_mods
4
4.0
Mar 8, 2021
03/21
by
Ksander Xx (Ksander)
data
eye 4
favorite 0
comment 0
Just a simple frame for Anet's mainboard. Allows insall/unistall MB with only four bolts, no need to hold the nuts by second hand. You just need to insert 4 nuts per side (may they need to be heated and fused), screw the holder to printer's frame and screw mainboard to it.
Topics: anet_a8_mods, stl, thingiverse, 3D Printer Accessories, anet_a6
9
9.0
Jan 18, 2021
01/21
by
Alex Praturlon (Keepars)
data
eye 9
favorite 0
comment 0
Simple feet to lift your Anet A8 off of your table. Also slightly reduces vibration noise from reverberating through the table. I used 6 and I recommend the use of 6 feet, 2 on the front, 2 on the back and 1 under each gantry base, using more wont hurt.
Topics: anet_a8_mods, 3D Printer Accessories, Anet_A8, thingiverse, stl
6
6.0
Apr 20, 2021
04/21
by
Brian Threadgold (meremale)
data
eye 6
favorite 0
comment 0
A customised gyro spinner using https://www.thingiverse.com/thing:802145 by https://www.thingiverse.com/atartanian to create the gyro. I simply added a shaft to it with a 5mm bore so it press fits onto any standard stepper motor shaft. https://youtu.be/PPft62ATREc
Topics: thingiverse, stl, spinner, 3D Printer Accessories, gyro, anet_a8_mods
8
8.0
Jan 15, 2021
01/21
by
Ellis Dee (EllisDee)
data
eye 8
favorite 0
comment 0
Anet A8 Leadscrew drive At first i need to say thanks to SmallArtFly for making the whole Anet A8 frame in customize able CAD files without him nothing were possible First Mill Tests in Beech (Hardwood) https://youtu.be/dqIOYJaO77g https://youtube.com/watch?v=4-tTspEUVCM https://youtu.be/NwmaC28zOCE Anet A8 Mill / Engraving Machine Hardware Status: Done Added Anet Frame Parts With Additional I-typ Hold for mill Extension Added a file with complete machine for help were the parts should be (95%...
Topics: thingiverse, stl, 3D Printer Parts, Anet_A8, anet_a8_mods
7
7.0
Jan 20, 2021
01/21
by
Trevader Klingler (Trevader24135)
data
eye 7
favorite 0
comment 0
I'd been getting some problems with heat creeping up the throat with neither my fan nor my heatsink mounted (due to the fact that I couldnt access the extruder mechanism without a complete teardown), so I found the KISS fan mount by aeropic, but I didnt want to bother with modding bolts or getting threaded rods or anything, o I made this. It just mounts using some of the spare hex head M3 bolts that came with the A8. the fan just slides in and out of the mount while still being held firmly and...
Topics: anet_a8_mods, 3D Printer Accessories, Anet_A8, thingiverse, stl
4
4.0
Mar 5, 2021
03/21
by
donny rijken (donnyrijken)
data
eye 4
favorite 0
comment 0
mount for the anet a6 bed level sensor
Topics: stl, anet_a6, anet_a8_mods, thingiverse, 3D Printer Parts
