3
3.0
Oct 15, 2021
10/21
by
CIS 94 (VSYS)
data
eye 3
favorite 0
comment 0
Support capteur fin de filament pour montage de la bobine sur portique Changer le guide de la vis sans fin par celui fourni, sinon le capteur va venir toucher celui d'origine.
Topics: stl, thingiverse, 3D Printing, anycubic_vyper
3
3.0
Oct 26, 2021
10/21
by
Chris B. (thingibreiti)
data
eye 3
favorite 0
comment 0
V-Slot Cover for the Anycubic Vyper and other printers with V-Slot profiles. There are of course already some variants. But I wanted one that is a bit more stable and covers the screws. On my Vyper the V-Slot profile is a bit wider on the right side. I recommend to print the cover for testing and then adjust the width. Simply adjust the desired length in the slicer.
Topics: thingiverse, stl, 3D Printing, anycubic_vyper
1
1.0
Apr 19, 2022
04/22
by
Tobias Seiffert (Auratum)
data
eye 1
favorite 0
comment 0
Just a cable holder for the Vyper, With a groove for a ziptie. Its desinged to fit under any modified filament sensor Holder.
Topics: anycubic_vyper, stl, 3D Printer Parts, thingiverse
2
2.0
Sep 13, 2021
09/21
by
Paul Matthews (pmatsol58)
data
eye 2
favorite 0
comment 0
Designed this to provide support to cable going to hot end of Anycubic Vyper printer. Edit 3rd Sept 2021 Updated to include cable tie fixing, VyperCableHolder3bev. Cable could slide down in slot and when the hot end moved to the right of the bed it could cause strain on the head and activate the strain gauge, cable tie adds extra grip to prevent cable from sliding down in slot.
Topics: anycubic_vyper, stl, 3D Printer Parts, thingiverse
2
2.0
Sep 14, 2021
09/21
by
Markus Maeder (FotoFieber)
data
eye 2
favorite 0
comment 0
The existing rubber feets I hade where to stiff. I designed new ones and printed in TPU with 50 infill. 4 feets required. Print one after the other, very slowly (10mm/s).
Topics: anycubic_vyper, 3D Printer Accessories, stl, thingiverse
2
2.0
Apr 19, 2022
04/22
by
Daniel Gauk (Motte76)
data
eye 2
favorite 0
comment 0
Dies ist ein Geräuscharmes Upgrade für Anycubic Vyper. Ersetzen Sie den Original-Lüfter durch Noctua NF-A9x14 PWM Lüfter: 2 Stück werden benötigt https://www.amazon.de/dp/B009NQM7V2?psc=1&ref=ppx_pop_dt_b_product_details Es können nicht alle Originalschrauben wieder verwendet werden. Da sie teilweise zu kurz sind. Wenn man keine M3 Schrauben in der richtigen Länge hat. Wäre das eine Möglichkeit....
Topics: anycubic_vyper, stl, 3D Printer Accessories, thingiverse
2
2.0
Apr 19, 2022
04/22
by
christoph Kralits (AlienAntiChris)
data
eye 2
favorite 0
comment 0
print it up side to Bed , maybe on an Glass surface. Enjoy
Topics: anycubic_vyper, stl, 3D Printer Accessories, thingiverse
2
2.0
Nov 30, 2021
11/21
by
Marvin Dannecker (mjayd14)
data
eye 2
favorite 0
comment 0
The original designs arm was a bit too short so I wasn't able to properly record. I also made the hole a bit bigger so it was a better fit for my webcam screw.
Topics: 3D Printer Accessories, thingiverse, stl, anycubic_vyper
3
3.0
Jan 18, 2022
01/22
by
Drew Vedbraaten (Brass_Angel)
data
eye 3
favorite 0
comment 0
Working on making an enclosure for my AnyCubic Vyper but found out that the IKEA Lack table was too short. Designed these legs to be just tall enough for the highest point of the printer, slips on/off with ease, and you can either glue them on, leave them alone, or screw them to the legs for easy removal. Printed 4 at once, took 27 hours.
Topics: anycubic_vyper, ikea_lack, thingiverse, Office, stl
1
1.0
Apr 19, 2022
04/22
by
Steven Ba (Fragmon)
data
eye 1
favorite 0
comment 0
stealthburner toolhead on the anycubic vyper
Topics: thingiverse, 3D Printers, anycubic_vyper, Vyper, stl, StealthBurner
2
2.0
Apr 20, 2022
04/22
by
T Maroon (Vaporus)
data
eye 2
favorite 0
comment 0
When looking for a cover for the holes over the belt tensioners for my Vyper I couldn't find any already made so I threw these together. They are currently way more simplified than I would like but get the job done. I plan on making a few revisions but wanted to get this up incase someone was looking for it like I was. Been up a day or two and I have made a few revisions. Note: I had some luck flipping them over and ironing the top, but oriented as the files are is much more reliable. I will...
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printer Accessories, stl
2
2.0
Dec 14, 2021
12/21
by
Sean Smith (Phoz4us1one)
data
eye 2
favorite 0
comment 0
This is an improved filament sensor holder and a hot end cable support all in one. I relocated my spool holder to the top of my Vyper. Due to the relocation of the spool holder pressure was being applied to the filament sensor. this was designed to relieve the strain and wear and tear on the sensor. the other part is used to control the location of the hot end cable. This will require the removal of the original hardware and the replacement of new longer hardware. You will need 4- 12mm M3...
Topics: 3D Printer Parts, stl, anycubic_vyper, thingiverse
3
3.0
Oct 14, 2021
10/21
by
Christopher Shaker (OldCoder)
data
eye 3
favorite 0
comment 0
I made dat_dakota_guy17's design a little taller, so that I did not have to remove the foot off the stock Vyper filament spool holder I used the free Microsoft 3D Builder program on Windows 10 to modify his design. I split the part in two, and extruded the lower part down to make it longer, then rejoined the two parts. I used large cable ties to bind the stock filament spool holder on top of this part, which is sitting on the top rail of the printer.
Topics: stl, 3D Printer Parts, thingiverse, anycubic_vyper
2
2.0
Oct 26, 2021
10/21
by
Alain Lehmann (A_Leh)
data
eye 2
favorite 0
comment 0
Anycubic Vyper drawer inlay with compartment. Printed: - Top surface parallel to print bed because I wanted to iron it for a smooth top surface - Bottom surface is tapered like the drawer and requires supports to be printed on almost the whole underside, safety first when you remove the supports :-) - Recommended to use rafts for the best bed adhesion - All original tools fit and some more under the lid
Topics: thingiverse, 3D Printer Accessories, stl, anycubic_vyper
4
4.0
Oct 14, 2021
10/21
by
Torsten Rother (Crawly2D)
data
eye 4
favorite 0
comment 0
For the Cura Slicer i have made nice Background Model for the Anycubic Vyper Printer. All Machine datas are set.
Topics: stl, 3D Printer Accessories, thingiverse, anycubic_vyper
3
3.0
Oct 14, 2021
10/21
by
Fabio Pigagnelli (fabiopigi)
data
eye 3
favorite 0
comment 0
Printed with Tree support and circular hole facing downwards on the plate.
Topics: thingiverse, anycubic vyper, stl, 3D Printer Accessories, LED
1
1.0
Apr 20, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 1
favorite 0
comment 0
In diesem Gehäuse kann ein Step-Down-Modul seitlich am Drucker am Aluprofil angeschraubt werden. Beispiel Step-Down-Modul: https://www.amazon.de/gp/product/B09DYDV3S5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Es werden M3 T-Nutensteine benötigt: https://www.amazon.de/gp/product/B07Q2KMNFS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 oder https://www.thingiverse.com/thing:3050607 und M3 Gewindeeinsätze
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
1
1.0
Jul 25, 2021
07/21
by
Thomas Müller (dirtdevil38)
data
eye 1
favorite 0
comment 0
Material PLA+ Infill 40%
Topics: thingiverse, Anycubic, anycubic_vyper, stl, 3D Printing, Vyper
1
1.0
Oct 29, 2021
10/21
by
Manuel Fichtner (manu90)
data
eye 1
favorite 0
comment 0
Anbei mein SuperSlicer Profil für den Anycubic Vyper mit Klipper Wie ihr Klipper installiert? https://youtu.be/z7NbNtArTQc Ihr findet dort noch einige Videos und meinen Discord schaut gern vorbei! _______________________________________________________ This is my SuperSlicer Profil for the Anycubic Vyper with Klipper How to install klipper? https://youtu.be/JkrJoIwAmfg You will find some more Videos and my discord - feel free to join and say hi!
Topics: thingiverse, klipper, stl, anycubic_vyper, 3D Printing, superslicer
2
2.0
Apr 20, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 2
favorite 0
comment 0
Ein (Kugel)Lager für den Filamenthalter am Vyper. Der Vorteil bei dieser Version: Die Breite ist variabel und die Filamentspule wird gut eingespannt. Nichts klappert oder vibriert mehr beim drucken. Benötigt werden 2 Rillenkugellager 6804 2RS 20x32x7mm.
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Nov 30, 2021
11/21
by
Christian Stett (Chris795)
data
eye 2
favorite 0
comment 0
For better attachment of the bowdtentube and fixation of the cables. Pictures will follow soon.
Topics: 3D Printing, thingiverse, anycubic_vyper, stl, bowden_tube
3
3.0
Sep 14, 2021
09/21
by
Stefan Büttner (CrossfireZ)
data
eye 3
favorite 0
comment 0
Custom VYPER logo in different designs. Since the VYPER unfortunately does not support the pause function via slicer, you have to wait for the correct height and then press pause to change the filament :-( Hopefully Anycubic will fix that!
Topics: VYPER, stl, 3D Printer Accessories, thingiverse, Anycubic VYPER
3
3.0
Oct 14, 2021
10/21
by
Niklas Neldner (fapth)
data
eye 3
favorite 0
comment 0
This is a spool holder that lets you keep the door on your FlashForge Adventurer 3 without making any modifications to the machine for printing external filament. All of the other designs are hours and hours, tons of wasted plastic and you have to keep the door off. Prints in 39 minutes. Super minimal design.... did I mention you can keep your door on? I would like to add two little tiny filament guides for running the filament through the inside that can handle just raw filament or to hold a...
Topics: thingiverse, stl, 3D Printer Accessories, Vyper, anycubic_vyper
2
2.0
Apr 19, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 2
favorite 0
comment 0
Neue Version vom Riemenspanner der Y-Achse für den Anycubic Vyper. Es wird die originale Riemenscheibe verwendet. Ich habe noch einen Spanner für die X-Achse mit gleichen Bauteilen. https://www.thingiverse.com/thing:5230175 Einbauanleitung: Riemen entspannen, Motor hinten abschrauben und herausziehen, jetzt vorderen Spanner abschrauben und Bett vorsichtig nach vorne schieben bis die ersten Rollen rauskommen (hinten am Aluprofil nachhelfen, hakt sonst am Aluprofil). Jetzt kommt man unten ran...
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Sep 13, 2021
09/21
by
Sven K. (Natoel)
data
eye 2
favorite 0
comment 0
It's a Remix of Bergman's famous 1-100 modern tanks. The Leopard 2a6 is especially modified for FDM printers. The hull and the turret are separated. If you like, you can use the original 2a6 turret from Bergman. My Remix can be printed without supports and the barrel vertically. Have fun.
Topics: leopard_2a6, stl, thingiverse, anycubic_vyper, tanks, Vehicles
1
1.0
Apr 20, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 1
favorite 0
comment 0
Another print head for the Vyper. Read the instructions for more information.
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Aug 9, 2021
08/21
by
nathen young (Glutt0ne)
data
eye 2
favorite 0
comment 0
InProgress mount for a E3D V6 hotend to replace the V5 in the anycubic Vyper. make sure to print the file twice to have a complete mount
Topics: vyper, thingiverse, anycubic_vyper, 3D Printer Parts, stl
1
1.0
Aug 9, 2021
08/21
by
Thomas Müller (dirtdevil38)
data
eye 1
favorite 0
comment 0
Gedruckt in einer 0,3 mm Auflösung mit 70% Infill Tree Unterstützung mit Dach. Material PLA
Topics: thingiverse, anycubic_vyper, 3D Printing, Anycubic, Vyper, stl
2
2.0
Apr 19, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 2
favorite 0
comment 0
Ein Riemenspanner der Y-Achse für den Anycubic Vyper. Eine Riemenscheibe (W6mm, 16T, Bore 3, Toothed) wird benötigt Ich habe noch einen Spanner für die X-Achse mit gleichen Bauteilen. Riemen nicht zu fest spannen, sonst bröselt das Lager :)
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
1
1.0
Apr 20, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 1
favorite 0
comment 0
Ein Cover für das Display am Vyper. Es werden M3 Gewindeeinsätze und 4 M3x16 Zylinderschrauben benötigt.
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Apr 20, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 2
favorite 0
comment 0
Ein Cover für den Endanschlag der X-Achse. Achtung! Das Logo und die beiden Haken müssen eingeklebt werden. Bitte Richtung und Länge der Haken beachten. Zudem wird ein Gewindeeinsatz M3 benötigt.
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Apr 19, 2022
04/22
by
Michael Scheid (Finest1989)
data
eye 2
favorite 0
comment 0
Hallo, es handelt sich hierbei um einen Remix aus zwei Projekten, die ich beide sehr gut fand. Der Remix besteht aus basis von https://www.thingiverse.com/thing:5149191/files und https://www.thingiverse.com/thing:5175594/files Mich hat beim normalen Guider gestört das das Filament am Plastik "scharrt" und daher hab ich beide Versionen kombiniert um eine Möglichkeit zu haben ein Kugellager einzubauen.
Topics: thingiverse, 3D Printers, filament_guide, anycubic_vyper, remix, stl
3
3.0
Oct 14, 2021
10/21
by
Ken Morris (Powermonkey0110)
data
eye 3
favorite 0
comment 0
A slip-on knob cover for the Anycubic Vyper parts drawer. Serves no real practical purpose except for making the knob more visible. Does not need to be printed with flexible filament. Surface looks a little wonky in the picture because I printed it laying face down so it would be faster, but it can be printed as already oriented in the STL without issue.
Topics: Anycubic, thingiverse, stl, Vyper, anycubic_vyper, 3D Printer Parts
2
2.0
Apr 20, 2022
04/22
by
Anton Hammer (RusVyper)
data
eye 2
favorite 0
comment 0
ANYCUBIC VYPER 2021 YEAR DIRECT EXTRUDER UPGRADE.
Topics: thingiverse, anycubic_vyper, Direct_extruder, 3D Printer Extruders, stl
3
3.0
Jan 19, 2022
01/22
by
Chris Karcz (ckarcz)
data
eye 3
favorite 0
comment 0
A bowden tube adapter for the filament sensor for newer (late 2021/2022) ANYCUBIC VYPER 3D printers.
Topics: Vyper, anycubic_vyper, Anycubic, thingiverse, stl, 3D Printer Accessories
2
2.0
Apr 19, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 2
favorite 0
comment 0
Neue Version vom Riemenspanner der X-Achse für den Anycubic Vyper. Es wird die originale Riemenscheibe verwendet. Ich habe noch einen Spanner für die Y-Achse mit gleichen Bauteilen. https://www.thingiverse.com/thing:5230176 Riemen nicht zu fest spannen, sonst bröselt das Lager :)
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Jan 18, 2022
01/22
by
Paul Matthews (pmatsol58)
data
eye 2
favorite 0
comment 0
An insert for the Anycubic Vyper adjustable Z stop to set the Z stop distance to the same as the fixed Z stops being shipped with newer Vyper printers.
Topics: Vyper, anycubic_vyper, thingiverse, stl, 3D Printer Parts
3
3.0
Jan 18, 2022
01/22
by
Daniel Vogel (Moorhuhn)
data
eye 3
favorite 0
comment 0
*** Euer Schmelz Freund*** Anycubic Vyper - Screen Cover
Topics: anycubic_vyper, fan, thingiverse, Tools, stl, vyper, mario
1
1.0
Apr 19, 2022
04/22
by
Michael Stenitschka (stenmic)
data
eye 1
favorite 0
comment 0
Halter für smarten Rauchmelder.
Topics: thingiverse, anycubic_vyper, Vyper, 3D Printing, Anycubic, stl
2
2.0
Apr 20, 2022
04/22
by
MuFeng Chi (ChiMuFeng)
data
eye 2
favorite 0
comment 0
密封箱的铁氟龙管可以插到模型的气动头上(m6规格的气动头-----自备) 螺丝需要更换 规格忘记了自己尝试
Topics: thingiverse, anycubic_vyper, 3D Printer Accessories, vyper_upgrade, stl
2
2.0
Dec 14, 2021
12/21
by
Lance Whitaker (Lancesolot)
data
eye 2
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/iHoFqEBDKkT
Topics: Anycubic, stl, 3D Printing, anycubic_vyper, thingiverse, filament_guide
2
2.0
Aug 9, 2021
08/21
by
Dennis Schwefelbauer (DerLatzer)
data
eye 2
favorite 0
comment 0
Habe mich mal rangemacht die originalen Lüfter zu ersetzen, da diese unglaublich fiepen wenn sie nicht 100% bekommen. Eins vorweg, es handelt sich noch um Work in Progress. Ihr könnt es gerne vorab testen und mir sehr gerne Feedback geben. Ich muss mir selbst noch die Lüfter bestellen, da ich die nur in 12V vorrätig habe. Habe die Lüfter aber ausgedruckt um alles Physisch zu testen. Die Luftdüsen würde ich empfehlen mit Linienbreite 0,3 und Schichthöhe 0,1 zu drucken damit sie zu sind....
Topics: thingiverse, anycubic_vyper, 3D Printer Parts, Anycubic, Vyper, stl
3
3.0
Sep 13, 2021
09/21
by
Stefan Büttner (CrossfireZ)
data
eye 3
favorite 0
comment 0
Anycubic VYPER lettering in 3D The V1 logo has a border at the bottom so that the logo can be inserted into the top rail of the printer. The VYPER background logo is available in 3 versions, with or without a tag. Since the VYPER unfortunately does not support the pause function via slicer, you have to wait for the correct height and then press pause to change the filament :-( Hopefully Anycubic will fix that!
Topics: VYPER, stl, thingiverse, 3D Printer Accessories, anycubic_vyper, Anycubic
2
2.0
Sep 14, 2021
09/21
by
Uwe Social (USG)
data
eye 2
favorite 0
comment 0
I was looking for a simple support for my swinging spool holder. This guy came up with the idea during my design. I added Version 2 with a different V on the chest and surfboard. Pick the one you like.
Topics: stl, thingiverse, anycubic_vyper, 3D Printer Parts, Spool_Support
3
3.0
Oct 14, 2021
10/21
by
Lisa Brune (Lisabrune)
data
eye 3
favorite 0
comment 0
Rangement pour l'imprimante Anycubic Vyper avec une pièce amovible. dimensions: 100x100x45mm Prévoir environ 15h d'impression.
Topics: Anycubic, thingiverse, stl, 3D Printer Accessories, Vyper, anycubic_vyper
1
1.0
Apr 20, 2022
04/22
by
Claus Terjung (CHTer)
data
eye 1
favorite 0
comment 0
Hier ein Halter für die beliebten Logitech Cams, Die Teile werden einfach zusammen gesteckt (oder zusammen geklebt) und neben den Schrittmotor für die Z-Achse eingeklemmt (oder angeschraubt bzw. geklebt). weitere Bilder folgen noch
Topics: thingiverse, anycubic_vyper, 3D Printer Accessories, Logitech_C270, stl
2
2.0
Nov 30, 2021
11/21
by
Lisa Brune (Lisabrune)
data
eye 2
favorite 0
comment 0
Rangement pour le tiroir de l'imprimante 3D Anycubic Vyper. Pour information, j'en ai eu pour 14h mais on peut réduire à 10h sans trop de problèmes. Hauteur de couche : 0.16 remplissage : 15% vitesse : 45 mm/s vitesse ventilateur : 100% (vitesse ventilateur initiale 0% sur 2 couches) adhérence : bordure
Topics: 3D Printing, thingiverse, anycubic_vyper, Vyper, stl, vyper_upgrade
2
2.0
Jan 18, 2022
01/22
by
Michael Stoyanov (maio246)
data
eye 2
favorite 0
comment 0
For some reason I wasn't able to upload only the archive, but some of you may be interested only in the mesh file, for others who don't have the thing i remixed it from please download the archive.
Topics: cura 4.12, thingiverse, anycubic vyper, cura_slicer, Other, stl
2
2.0
Apr 20, 2022
04/22
by
Shane Roeseler (Scero)
data
eye 2
favorite 0
comment 0
This is the modified mount for the VORON Switchwire to mount it to a stock Vyper (no need for linear rail). You will need: 4x 16mm M3 2x 10mm M3 1x 4020 Blower Fan 24v (remove the stock 4010 fan)
Topics: thingiverse, anycubic_vyper, mount, 3D Printer Extruders, stl, voron
4
4.0
Aug 22, 2021
08/21
by
Oliver Muenk (bombastikde)
data
eye 4
favorite 0
comment 0
I don't like the way the filament sensor bends while retraction and I feed the Printer from top. so I create this Filament Extruder Bearing Guide for Anycubic Vyper. Printing: Support: Yes resolution 0,2 Infill 50% 3 of M3 x 30 2 of M3 x 16 1 of 608 Bearing
Topics: 608_bearing, anycubic_vyper, stl, thingiverse, 3D Printer Parts, Anycubic
