7
7.0
Apr 20, 2021
04/21
by
( enter name here ) (bariton3)
data
eye 7
favorite 0
comment 0
Mini, but not too small, 3D printer that sits on your desk!. It is remixed off of many things, put together to make a 3D printer. As far as I can tell, this machine will need to be tethered during prints so big oopsies there, but this uses a CNC Shield for an Arduino Uno R3, with 28BYJ-48 motors that need to be converted to bipolar motors, and A4988 drivers. An E3D Hotend will be used with the same 28BYJ-48 motors to push filament through, though a Nema motor will be much more efficient, and...
Topics: thingiverse, reprap, 28BYJ-48, 28BYJ48, 3d_printer, cnc_shield, 28byj, uno, Stepper_28BYJ-48,...
4
4.0
Mar 21, 2021
03/21
by
(005)
data
eye 4
favorite 0
comment 0
Thanks to the great 3d scanner design from Ferreti, I've adapted to a bubble maker, which uses 2 stepper motors each one with 6 pallets for making bubbles, and 1 usb fan for making the air flow. Hints Best way to make liquid composition is to use - 6 parts water - 2 parts dish soap - 1 part sugar or glycerine and slowly mix it without making bubbles. The parts where liquid stay is about 160 ml volume so, based on above hint, I've put 125 ml water + 25 ml dish soap + 1 sugar teaspoon. Bubble...
Topics: bubble_maker, arduino, Mechanical Toys, stl, fan, bubble, CatchTheWind, thingiverse
8
8.0
Jan 17, 2021
01/21
by
(2beers)
data
eye 8
favorite 0
comment 0
Hallo! Es handelt sich um ein Gehäuse für einen nanoCUL (CUL1101) der 433MHz Greäte über FHEM zu schalten. Auf YouTube gibt es ein super Video von haus-automatisierung.com wie der nanoCUL zu bauen ist. Ich habe etwas andere Bauteile verwendet, aber der nanoCUL funktioniert sehr gut. Teile: Cc1101 Modul: http://www.dx.com/p/diy-cc1101-433mhz-wireless-transceiver-module-for-arduino-green-2-pcs-149251#.WiF_3EriaUk Arduino-nano:...
Topics: Gehä, use, case, automatisierung, nanoCUL, arduino, Electronics, automation, cc1101, nano,...
8
8.0
Jun 11, 2021
06/21
by
(3D-Dreamparts)
data
eye 8
favorite 0
comment 0
Summary This is an slim Case for the NodeMCU V3 Wifi Board. It's 5mm thin. You have to desolder the pins. The printed part and the NodeMCU board must be glued together. Print Settings Printer: Tevo Delta Little Monster Rafts: No Supports: No Resolution: 0,1mm Infill: 100% Notes: When you print it with the W-lan Symbol to the Printbed you get the best results.
Topics: NodeMCU_V3, case, arduino, arduino_case, NodeMCU_ESP8266, nodemcu, thingiverse, Wifi, ESP8266,...
7
7.0
Jun 11, 2021
06/21
by
(3D-Dreamparts)
data
eye 7
favorite 0
comment 0
Summary An small ArduinoCase. The second one has an hole for an Keychain. Print Settings Printer: Tevo Delta Little Monster Rafts: Yes Supports: No Resolution: 0,05mm / 0,1mm Infill: 100%
Topics: keychain, case, arduino, arduino_case, thingiverse, arduinopromicro, stl
8
8.0
Apr 18, 2021
04/21
by
(3Dummy)
data
eye 8
favorite 0
comment 0
Arduino Nano dummy model to use for designing. All measures are pretty accurate except some for the thickness of the board, documentation says it should be thick 1mm but every one of my boards is 1.55, so the dummy is 1.55 too. Other than that, the top part is all measured (in case you need to know where the leds are), but the bottom part is not accurate for the smaller resistors, bigger components are ok for what I could measure with the pins on. In STEP and STL formats, there is one file with...
Topics: Electronics, Arduino_Nano, thingiverse, stl
7
7.0
Apr 1, 2021
04/21
by
(4cpus4me)
data
eye 7
favorite 0
comment 0
Arduino Uno/Mega/Nano breadboard holder (Remix) I liked the original but I prefer the breadboard to be up front so I made some changes: 1)Moved the Uno mount back 20mm for wire clearance and tilted the tray 45 degrees for much better view angle to read the Uno pin numbers 2)Added a couple storage areas in the new layout. 3)Removed some excess material under the breadboard area that was unnecessary for my needs.
Topics: prototyping base, breadboard_holder, Arduino_Nano, thingiverse, Electronics, Arduino_Mega,...
6
6.0
Mar 2, 2021
03/21
by
(7ofclubs)
data
eye 6
favorite 0
comment 0
The Eleksmaker Laser that I received only allowed me to mount the Arduino Mana board on top of the t slots. I hated that location. Mounting the Arduino on the front of the machine caused it to be raised by about 20mm higher than the back half of the machine and that was unacceptable. I reworked the original mount so that it could be placed on the front of the machine without any issues and using the original hardware provided by Eleksmaker. Enjoy!
Topics: Arduino Mana, Mana, elekslaser, thingiverse, stl, EleksMaker, arduino_case, Parts,...
8
8.0
Apr 2, 2021
04/21
by
(AMS3000)
data
eye 8
favorite 0
comment 0
Here is an enclosure for an Arduino Uno that I designed in Tinkercad. I have printed it, and it works pretty well, although I really want to rearrange or redo the holes so that they line up neatly with the header pins. It does make a nifty little home for an Arduino, if you have yours sitting on your desk all day like I do. This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/goyPxkdQ46U
Topics: thingiverse, Electronics, Box, Arduino, Enclosure, Tinkercad, Uno, stl, Snap_Fit
5
5.0
Jun 12, 2021
06/21
by
(AlexKorvin)
data
eye 5
favorite 0
comment 0
Summary Here is a project of a walking robot with the body of the legendary Soviet UAZ "loaf" SUV. The robot turned out to be simple, strong and relatively not expensive for its size. The firmware from this project - https://www.thingiverse.com/thing:1009659 Parts list: 12x Quality Servos MG996R - http://ali.pub/49vqac 1x Arduino Nano - http://ali.pub/49vpsn 1x Expansion Board - http://ali.pub/49vpo6 1x Bluetooth module HC- 06 - http://ali.pub/49vpra 1x 20A step-down converter -...
Topics: mech, walking_robot, arduino, mechwarrior, thingiverse, UAZ, ornament, stl
11
11
Apr 5, 2021
04/21
by
(Amplivibe)
data
eye 11
favorite 0
comment 0
A customizable box for my arduino /ramps combination for mounting on the MendelMax. Still experimental (yet to print). Slide the base into the 4 clips, then put it on the MendelMax. Cover it up with M3 on the cover. Update (after observation, printing, more measuring, my MendelMax): - Only 2 of the 4 arduino holes fit. If you want a good fit, (re)measure the hole distances. I'm content for now - My box needed to be a lot higher than 40mm. I used 65 mm (new2.scad). - The box is a little bit too...
Topics: thingiverse, arduino, 3D Printer Accessories, stl, mendelmax, box, ramps
12
12
Apr 5, 2021
04/21
by
(Amplivibe)
data
eye 12
favorite 0
comment 0
A mock Arduino shape in SCAD which you can use to fit your Arduino. Cylinders are in place of the holes so you can subtract this thing from your object to stamp holes.
Topics: thingiverse, arduino, 3D Printer Accessories, stl
11
11
Apr 5, 2021
04/21
by
(Amplivibe)
data
eye 11
favorite 0
comment 0
A better box for my Arduino/RAMPS combination with a 60mm fan on my MendelMax, with easy clip-on mount. Note: new4b should fix the sticking_out problem, I didn't have problems myself.
Topics: thingiverse, arduino, 3D Printer Accessories, fan, mount, stl, mendelmax, box
17
17
Mar 21, 2021
03/21
by
(AndrewFromOz)
data
eye 17
favorite 0
comment 0
This is a bezel for a cute 25mm 128x64 pixel I2C OLED display. These are easy to interface with an Arduino library and have crisp, white pixels. Designed in RS Designspark Mechanical. Prints quickly - trim inside edges so as not to crack display glass upon insertion. Here's the display link: http://www.ebay.com.au/itm/381010818461
Topics: arduino, stl, oled, bezel, tinyOLED, Electronics, thingiverse
5
5.0
Apr 13, 2021
04/21
by
(AndrewFromOz)
data
eye 5
favorite 0
comment 0
Simple clip-in holder for "Arduino Pro Mini" modules. These are ATMega32 based boards similar to the Arduino Mini. They don't have USB hardware so are very cheap (
Topics: thingiverse, mini, clone, arduino, stl, arduino_case, Electronics
9
9.0
Apr 30, 2021
04/21
by
(Arikoth)
data
eye 9
favorite 0
comment 0
I designed this track in Sketchup for the 3D printed robotics platform we use to teach classes at work.I created this because I couldn't locate a track that was assembled and didn't need to use metal pins or special filament to get working. This is a work in progress as I am testing and printing a drive gear that should fit on a standard servo. This should allow for easy application on a wide range of DIY robotics kits. Please let me know if you print one or have any feedback! Update 2-1-17: I...
Topics: stl, robot, Robotics, tank, arduino, thingiverse
4
4.0
Apr 1, 2021
04/21
by
(Arnie)
data
eye 4
favorite 0
comment 0
This is remix of a peristaltic pump from Kardis. I have redesigned the rotor part for better grip on the shaft. Now it has internal slot for M3 nut. The rotor consist of two parts that should be glued together. If printed from ABS, use just a bit of acetone. If printed from PLA use cyanoacrylate glue. The stator uses same screw positions as original part. It is designed for 5 mm outer diameter and 3 mm inner diameter silicone tube. I have tunined the internal diameter of stator until the force...
Topics: arduino, hydroponics, thingiverse, pump, Robotics, stl, peristaltic
11
11
Mar 19, 2021
03/21
by
(AtomKemp)
data
eye 11
favorite 0
comment 0
This single sided Arduino variant can be easily etched by hand and is part of the Playing With Electronics chapter of my new book "[The Makerspace Workbench](http://shop.oreilly.com/product/0636920028147.do)" from Maker Media! Simply open up the files in EAGLE 6.0 or later, print out the traces onto bare circuit board and etch away!
Topics: makerspace, pcb, Electronics, etching, thingiverse, arduino, stl
12
12
Jun 11, 2021
06/21
by
(Automata)
data
eye 12
favorite 0
comment 0
Summary With this collection of adaptors, you will be able to use low coast Arduino, servos, motors and sensors with Lego (mindstorm or technic) bulding blocks, to create robots or just about anything you would do with Lego Mindstorm, but with more open source micro-controller and low cst actuators and sensors. I used a S4A EDU Robotic Controller board, MG996R, SG-92R servos; Gear Motor DG01D and micro breadboard. In COsta Rica you can get them http://www.crcibernetica.com/
Topics: arduino, motor_mount, Costa_Rica, Lego_Mindstorms, thingiverse, Servo_Mount, LEGO, stl
6
6.0
Jun 10, 2021
06/21
by
(AwesomeA)
data
eye 6
favorite 0
comment 0
Arduino Logo Tips Appreciated! https://www.patreon.com/awesomea
Topics: arduino, sign, logo, thingiverse, arduino_logo, Signs & Logos, stl
14
14
Jun 6, 2021
06/21
by
(AwesomeA)
data
eye 14
favorite 0
comment 0
Adafruit Industries Logo. I'm a huge fan of Adafruit. Really enjoy the videos! I have really learned so much from them. Love the tutorials, the whole website is a peach! https://www.youtube.com/user/adafruit Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Adafruit has grown to over 50 employees in the heart of NYC...
Topics: stl, 3dpicks, thingiverse, arduino, tech, electronics, great, logo, stand, awesome, emblem, Signs...
12
12
Jan 18, 2021
01/21
by
(BB11)
data
eye 12
favorite 0
comment 0
I made this case for Arduino badUSB. All credit for this powerful hacker gadget goes to Seytonic. Follow the link for additional information how to make it https://www.youtube.com/watch?v=QrwqeI99I8E&t=10s
Topics: arduino, usb rubber ducky, DIY, thingiverse, dip switches, rubber ducky, badusb, bad usb, stl
12
12
Jan 18, 2021
01/21
by
(BB11)
data
eye 12
favorite 0
comment 0
Case for Attiny85 USB Mini Dev Board.
Topics: Electronics, ATtiny85, arduino, thingiverse, arduino_case, stl
8
8.0
Mar 13, 2021
03/21
by
(BJBToastem)
data
eye 8
favorite 0
comment 0
Mounting for a Makey Makey. There are no mounts on the Makey Makey, so I designed this one quickly and printed it on a reprap air.
Topics: thingiverse, makerbot, reprap, electronics, 3D, part, stl, arduino, Electronics, makeymakey, mount
6
6.0
Jan 4, 2021
01/21
by
(BasementMaker)
data
eye 6
favorite 0
comment 0
The instructions to build this robotic arm can be found on instructables by clicking [here](https://www.instructables.com/id/3D-Printed-Arduino-Based-Robotic-Arm)
Topics: Robotic arm, robotics, 3D Printing, stl, Servo, Arduino, assembly_required, thingiverse
2
2.0
Dec 1, 2021
12/21
by
(Baske)
data
eye 2
favorite 0
comment 0
A holder for WS2812B LED's. These can be folded up and placed into the holder so that they light up individual squares as pixels. I used two of these as a clock, but they should be able to serve as a general 12x12 display matrix. Easy to join together by gluing them onto a paper sheet. Instructions for putting together are at https://www.instructables.com/Arduino-WS2912B-LED-Clock/ This is a wholly new design but was inspired by The 'lazy grid clock' by Parallyze...
Topics: LED, Electronics, thingiverse, clock, stl, arduino, ws2812
10
10.0
Apr 23, 2021
04/21
by
(BattleGear)
data
eye 10
favorite 0
comment 0
Hi Sim Racing Fans Update: Reupload in higher Export resolution (Revision 2)!!! the old version workes fine to but dont looks so nice^^ This is my case for a arduino nano, designed for a Thrustmaster button plate mod for a 70mm bold pattern (Momo, Sparco and Omp Wheels)... you could use it between the wheel - quick release or "dsd" style adapter to place your nano and hide the most of the cable clutter :-) its 25mm thick and it brings, of course, the wheel closer so you so that you...
Topics: Video Games, Arduino_Nano, stl, 70MM, thingiverse, Thrustmaster
10
10.0
Jun 6, 2021
06/21
by
(BattleGear)
data
eye 10
favorite 0
comment 0
Hi Sim Racing Fans Update: Reupload in higher Export resolution (Revision 2)!!! the old version workes fine to but dont looks so nice^^ This is my case for a arduino nano, designed for a Thrustmaster button plate mod for a 74mm bold pattern (Nardi or Raid Wheels)... you could use it between the wheel and a slimline quick release!!! and not a "dsd" style adapter (it have only the 70mm pattern) to place your nano and hide the most of the cable clutter :-) its 25mm thick and it brings,...
Topics: stl, Video Games, Arduino_Nano, thingiverse, Thrustmaster, 74mm
11
11
Jun 7, 2021
06/21
by
(Benjamin)
data
eye 11
favorite 0
comment 0
Old metallophone (toy) rejuvenated by Arduino, some electromagnets and printed parts : https://vimeo.com/46571145 Detail : https://vimeo.com/47593529 Can be played with mouse, keyboard and midi files, samples included in software pack: Georges Brassens - *Ballade des dames du temps jadis* Agnes Obel - *Riverside* Yann Tiersen - *Comptine d'un autre été* Julian Nott - *Wallace and Gromit* Michael Giacchino - *Married Life* (Pixar *Up* soundtrack) ___ Flash (AS2) on the software side:...
Topics: Music, education, thingiverse, xylophone, usb, electromagnet, stl, arduino, solenoid, toy, music
12
12
Mar 18, 2021
03/21
by
(Bielin)
data
eye 12
favorite 0
comment 0
;,
Topics: audio, bluetooth_module, bluetooth_speaker, smartphone, music, phone, 3D Printing, bluetooth,...
8
8.0
Jan 17, 2021
01/21
by
(Blackline)
data
eye 8
favorite 0
comment 0
Hello rc friends, Today I have some landing drone pads made, perhaps useful for someone who needs one quickly :)
Topics: arduino, drone_landing_gear_, thingiverse, Landing_Gear, drone, R/C Vehicles, stl
2
2.0
Aug 8, 2021
08/21
by
(Blackline)
data
eye 2
favorite 0
comment 0
https://www.youtube.com/watch?v=rvlV7gORwY4 info later Please support my channel by giving a like and subscribe video on my video !! thumbs up
Topics: 5050 RGB led, arduino light project, rc arduino led, thingiverse, R/C Vehicles, arduino 5050 RGB...
5
5.0
Jan 3, 2021
01/21
by
(Blackline)
data
eye 5
favorite 0
comment 0
Create your own light system, here is a video, how you can make your own android app with an arduino and a bluetooth module for a dollhouse or DIY light system. Everything is included so you can try it yourself https://www.youtube.com/watch?v=yLVLvI0165o
Topics: 3D Printing, leds on/off, App Inventor, stl, bluetooth dollhouse, lamp, app inventor arduino,...
6
6.0
Jun 21, 2021
06/21
by
(Boopidoo)
data
eye 6
favorite 0
comment 0
Being constantly disappointed by the heated socks I've bought I decided to make my own controlled by an arduino and powered by 2-4S lipo. The socks are cheap ones sold on eBay and the idea is to have the battery and control unit tucked away in my jacket with cables to each sock. Obvious downsides in having cables running through my pants but the upsides more then make up for it. The control unit has a momentary flip-switch ON-OFF-ON and a number of LEDs which shows if it is powered, level of...
Topics: thingiverse, socks, DIY, arduino, stl, pro, heated, micro
3
3.0
Jun 12, 2021
06/21
by
(BoopidooDesigns)
data
eye 3
favorite 0
comment 0
The DT71 digital tweezer is awesome, it has already made my multimeter slightly redundant. It's not as accurate but the workflow when doing electronics improved. The case it came with was a bit bulky though so I designed something smaller which still holds the tweezer, charging harness and extra tips. The case uses friction lock, twist CW to lock and CCW to unlock. As always, if you find it useful a tiny donation goes a long way to show appreciation. :) EDIT: Updated the lock so it's a lot more...
Topics: Electronics, case, multimeter, box, arduino, tweezer, dt71, thingiverse, electronics, stl
11
11
Apr 7, 2021
04/21
by
(BorisLandoni)
data
eye 11
favorite 0
comment 0
This project allows you to write on the spherical surfaces such as Christmas balls or eggs. This machine is in fact known in the internet as Eggbot or Spherebot . More info http://www.open-electronics.org/spherebot-reloaded-customize-your-xmas/ Video: http://www.youtube.com/watch?v=Ofufxmm6wd4
Topics: painter, easter, christmas_balls, printer, spherebot, stl, egg-bot, eggbot, thingiverse, sketchup,...
8
8.0
Jan 21, 2021
01/21
by
(Brabus453)
data
eye 8
favorite 0
comment 0
LCD mount for 16x2 lcd display, for Raspberry Pi or Arduino. This design features a 30 degree incline and a method of securing the screen in place which requires no supports. Updated version.
Topics: display, Raspberry_pi_3, arduino_case, stands, stl, Raspberry_Pi_Zero, lcd_holder, thingiverse,...
12
12
Apr 1, 2021
04/21
by
(Brightonc)
data
eye 12
favorite 0
comment 0
This is a small stand for the Arduino UNO for testing code and/or connecting to senors and other projects.
Topics: arduino, thingiverse, Other, sketchup, stl
10
10.0
May 1, 2021
05/21
by
(Bubolz)
data
eye 10
favorite 0
comment 0
Hello Makers! B-Bot is a simple cheap and compact DIY Desktop CNC Machine Project. It is the ideal solution for those who want a CNC for use at home or workshop. It is a universal tool for students, engineers, designers, makers, hobbyists and artisans. FEATURES ● Printer friendly, support-free 3D-printing ● Simplified assembly and clean design ● Working area 200x150x50mm ● Outside area 33x35x34cm ● Closed structure prevents dust and debris dispersion ● Compatible with micro grinders...
Topics: Dremel_Accessories, cnc, router, CNC_Machine, mill, laser, grblshield, dremel_4000, lasercut,...
5
5.0
Apr 12, 2021
04/21
by
(C3D)
data
eye 5
favorite 0
comment 0
A box for the USB Programmer of the Arduino Mini Pro or any Arduino compatible Mini Pro. / Caja para el programador USB del Arduino Mini Pro o cualquier placa compatible con Arduino Mini Pro.
Topics: thingiverse, programmer, arduino, stl, usb, Electronics, arduino_box
6
6.0
Mar 20, 2021
03/21
by
(C3D)
data
eye 6
favorite 0
comment 0
A very simple Arduino UNO Stand for DIY electronics projects. / Un simple soporte para proyectos electr
Topics: stl, Arduino_Uno, arduino_mount, arduino_stand, Electronics, thingiverse
6
6.0
Jun 11, 2021
06/21
by
(CarminKern)
data
eye 6
favorite 0
comment 0
Summary A holder for Arduino Mega 2560 boards. The mounting holes are intended for a threaded insert whit RX-M3x5,7 and M2,5x8. The magnets are 11x11x4mm neodymium magnets and are glued with a glue.
Topics: MagnaticHolder, arduino, 2560, Magnatic, thingiverse, Mega, Holder, stl
6
6.0
Apr 12, 2021
04/21
by
(Cavimaster)
data
eye 6
favorite 0
comment 0
Support petit et simple prêt à coller
Topics: thingiverse, Micro, Support, ProMini, stl, Electronics, Arduino, Leonardo
5
5.0
Apr 12, 2021
04/21
by
(Cavimaster)
data
eye 5
favorite 0
comment 0
Simple support à coller ou visser pour fixer le module lecteur RFID RC522. Disponible sur chipandlove.ch ici: http://www.chipandlove.ch/fr/home/100-kit-rfid-rc522.html Pour le projet RFID Logger: http://www.devsector.ch/cavimaster/2015/02/authentification-rfid-automatique-sur-pc-mac-web-rfid-logger/ https://www.youtube.com/embed/CHGM_wozOGw
Topics: thingiverse, NFC, rfid, arduino, RC522, stl, logger, Electronics, module, loginer
5
5.0
Jun 10, 2021
06/21
by
(Cavimaster)
data
eye 5
favorite 0
comment 0
Little robot friendly, simple and robust based on Arduino UNO R3. It uses an Arduino UNO R3, an ultrasound detector HCSR04 and 3 servo motor SG90. Servo are fixed with plastic flanges Technical data: Dimentions: Long. 120mm | width. 80mm | High. 75mm Weight: 170g (without battery) Driving wheel diameter: 60mm Diameter of mobile: 25mm You can buy it ready to play (from Switzerland or France only) or electronical stuff on: http://www.chipandlove.ch...
Topics: Chassis, arduino, robot, support, wheel, Robotics, 9g_servo, thingiverse, robotics, HCSR04,...
8
8.0
Apr 2, 2021
04/21
by
(Chaceb94)
data
eye 8
favorite 0
comment 0
This 3d printable will not only hold your breadboard and Arduino Uno conveniently side by side. It will also serve as a great little protective case/enclosure for the Arduino. This thing is really just a merging together of things from other people. Credit really goes to Torsten and mjcous for all engineering since all I did was join the 2. I did add some snaps to the case by Torsten, but it will still work I think with the original lids from: http://www.thingiverse.com/thing:28971
Topics: arduino, container, thingiverse, case, parametric, holder, Other, stl
6
6.0
Apr 9, 2021
04/21
by
(Childs)
data
eye 6
favorite 0
comment 0
The pieces slide together, it is a little tight but it does not require any screws :) Fits an Arduino Uno with a Seed Studio Ethernet shield. You can fit a little something on the top which is why I have it a little taller than the Uno and shield.
Topics: arduino_case, Electronics, ethernet_shield, stl, enclosure, electronics_enclosure, thingiverse,...
5
5.0
Apr 13, 2021
04/21
by
(Cnc4Joe)
data
eye 5
favorite 0
comment 0
ABS slider for small CNC projects ABS body and slider. All others parts are metal. You can find all metal parts local or the kit here: http://www.cnc4newbie.com Price for motor/metal kit is 70$ shipping included for USA and Canada. USE COUPON CODE : NEMA14SHIP Included in the kit: -1x Nema 14 motor with wiring harness (only 2 holes are threaded on the motor) -2x 6" stainless smooth rods 5/16" diameter -1x 1/4-20 steel screw -1x 1/4-20 steel nut -1x aluminum rigid coupling -1x flange...
Topics: thingiverse, slider, DIY, cnc_router, arduino, diy_cnc_router, stl, z_axis, diy_slide, cnc, slide,...
6
6.0
Mar 18, 2021
03/21
by
(Coder96)
data
eye 6
favorite 0
comment 0
This is a mount for the GRBLDuino Mega Integrated - GRBL 1.1 made by Eccentric Workshop. The mounting hols are for M3 holes. 4 - M3x8mm bolts 4 - M3 nutts
Topics: grbl, arduino, stl, thingiverse, Electronics
9
9.0
Apr 26, 2021
04/21
by
(CodonExe)
data
eye 9
favorite 0
comment 0
Rostock Max V2 Duet Controller and LCD Housing: This is a 4 part system that will mount the different accessory boards for the Duet. Part 1 is the base, this will allow you to attach the assembled housing the same way the stock does and mounts the optional Duex4 board. Part 2 mounts the Paneldue and houses the ribbon cable for the display. Part 3 is the LCD display mount, you can choose the 4.3" LCD touchscreen display or the 7" LCD touchsreen version. Part 4 is the Duet controller...
Topics: 7_inch, 4_3inch, auto_bed_leveling, rostock_max_v2, rostock, PanelDue, thingiverse, reprap, 3D...
