6
6.0
texts
eye 6
favorite 0
comment 0
96 p. : 28 cm
Topics: Autofocus cameras, 35mm cameras, Photography
18
18
Oct 23, 2019
10/19
by
Levey, Marc
texts
eye 18
favorite 3
comment 0
144 pages : 29 cm
Topics: 35mm cameras, Autofocus cameras, Photography, Autofokuskamera
2
2.0
Mar 15, 2021
03/21
by
AleyRobotics (AleyRobotics)
data
eye 2
favorite 0
comment 0
https://youtu.be/fMcxduhwp5I
Topics: Parts, thingiverse, autofocus, co2_laser, stl, lasercutter, CO2
Topics: shutter, flash, camera, autofocus, mode, button, exposure, metering, release, film, shutter...
2
2.0
Mar 15, 2021
03/21
by
Scott Mitchell (smitchelus)
data
eye 2
favorite 0
comment 0
This is completely inspired by jamesdedij's design for the C8 (https://www.thingiverse.com/thing:4191869) I then started from TrevOinAus's design for the LX90 (https://www.thingiverse.com/thing:4592948) which needed to be adjusted to work with the LX200 knob and the back that I needed a holder for a NEMA14 motor not an EAF. For the record, I believe TrevOinAus's EAF holder would plug directly into my holder if there were ever an LX200 user who needed that combination. The source OpenSCAD files...
Topics: thingiverse, stepper_motor, autofocus, DIY, stepper_motor_mount, astrophotography, stl
Photographs I took in Olinda, Victoria, Australia. Note: the photos are not cropped, APS film has a wider aspect ratio to 35mm film. Camera used: Agfa Futura Autofocus 2 Film used: Unknown, but most likely expired film.
Topics: Film photography, Agfa Futura Autofocus 2, APS film, Expired film
2
2.0
Jan 6, 2021
01/21
by
andy (lowtech)
data
eye 2
favorite 0
comment 0
Autofocus system designed to mount to the finder screw holes of the Z103 (maybe be compatible with other scopes too). optimised for 3d printing, no supports required. Designed to be used with an Arduino nano and fit an A4998 driver, im running myFocuserPro2 firmware which works well with kstars/indi, but also has stand alone software available too. Disclaimer, i wanted this to be as compact as possible, so fitting the arduino and driver in the compartment is DIFFICULT! but definitely doable....
Topics: autofocus, stl, Z103, william_optics, autofocuser, Physics & Astronomy, thingiverse
3
3.0
Apr 4, 2021
04/21
by
Shocky Han (shocky)
data
eye 3
favorite 0
comment 0
Control webcam lens with standard servo would be fun. See the video - http://youtu.be/27uGegRznfE. Next thing? Autofocusing the webcam, of course!
Topics: thingiverse, Robotics, gear, spur, webcam, autofocus, stl, Arduino, servo, blender
Casual snapshots I took in Ferntree Gully, Victoria, Australia. The photos are not cropped, APS film has a wider aspect ratio than 35mm. Camera used: Agfa Futura Autofocus 2 Film used: Unknown, but almost certainly expired film
Topics: Film photography, Agfa Futura Autofocus 2, APS film, Expired film
generalmanual 000030183
Topics: camera, film, americas, models, flashbar, autofocus, onestep, rollers, distance, feet, americas...
The first photo shows what my bedroom looked like at the time, the others were taken in Olinda, Victoria, Australia. The camera used was the Agfa Futura Autofocus 2. The film used is unknown, but was clearly expired film (APS film ceased production in the early 2010s).
Topics: Film photography, 2010s, Agfa Futura Autofocus 2, APS film, Expired film
Topics: lens, shooting, autofocus, focus, hood, mount, filter, focusing, meters, complies, lens case
Photographs I took mostly in Olinda, Victoria, Australia, except for the first photo, which was taken in our living room. Exact date unknown, but the files were created in 2015. Camera used: Agfa Futura Autofocus 2 Film used: Konica JX400 (expired film)
Topics: Film photography, Agfa Futura Autofocus 2, Konica JX400, Expired film, APA film
Photos I took in Mount Dandenong (1-3) and Olinda (4-25). These photos are not cropped; APS film has a wider aspect ratio than 35mm. Camera used: Agfa Futura Autofocus 2 Film used: Konica JX400 (expired April 2008)
Topics: Film photography, Agfa Futura Autofocus 2, Konica JX400, APS film, Expired film
2
2.0
Jan 9, 2021
01/21
by
Jan Pedersen (slemrijan)
data
eye 2
favorite 0
comment 0
This bracket fits the Bresser Messier AR152s for autofocus. You will need: 1pc. nema 17 stepmotor. 1pc. GT2 Timing Pulley 16 Tooth 1pc. GT2 Timing Pulley 48 Tooth 1pc. GT2 Timingbelt 160
Topics: nema17_stepper_motor, thingiverse, bresser, stl, BresserMessier, Physics & Astronomy,...
3
3.0
May 1, 2021
05/21
by
Cesar Mattos (FearL0rd)
data
eye 3
favorite 0
comment 0
Autofocuser adapter for NEMA17 motors or if you use this adapter https://www.thingiverse.com/thing:2707798 you can use 28BYJ-48 motor. I have decided go with 28BYJ-48 and bipolar mod because it is lighter. For the focuser electronics I'm going with Ardufocus Printed: 0.15 resolution and no supports.
Topics: stl, Focuser, Telescope_focuser, autofocuser, astro-tech, Physics & Astronomy, thingiverse,...
Topics: lens, hood, focus, autofocus, shooting, mount, meters, complies, olympus, buttons, limit switch
Topics: flash, camera, shutter, mode, autofocus, battery, film, button, release, lens, shutter release,...
Topics: flash, camera, shutter, mode, film, autofocus, battery, lens, button, lcd, shutter release, release...
generalmanual 000020846
Topics: flash, camera, shutter, mode, autofocus, battery, film, button, release, lens, shutter release,...
Topics: flash, camera, shutter, mode, autofocus, battery, button, film, lcd, release, shutter release,...
4
4.0
Mar 12, 2021
03/21
by
Maciej Nos (PLAyerM)
data
eye 4
favorite 0
comment 0
Cover for temperature probe DS18B20. Designed for WO 71GT. Part of MyFocuserPro2 project by Robert Brown. Great project for astrophotography. Happy printing!
Topics: wind shield, thingiverse, autofocus, astrophotography, autofocuser, astronomy_telescope, temerature...
generalmanual 000008481
Topics: flash, camera, shutter, mode, autofocus, battery, button, film, lcd, release, shutter release,...
generalmanual 000030026
Topics: shutter, flash, camera, autofocus, mode, button, film, batteries, lcd, release, shutter release,...
Topics: flash, camera, shutter, mode, autofocus, battery, film, button, release, lens, shutter release,...
Topics: shutter, flash, camera, mode, exposure, autofocus, button, metering, film, subject, shutter...
Topics: shutter, flash, camera, autofocus, mode, exposure, subject, release, metering, button, shutter...
Topics: flash, shutter, camera, battery, autofocus, button, mode, release, film, lcd, shutter release,...
Topics: flash, shutter, mode, camera, film, lcd, subject, button, autofocus, indicator, shutter release,...
Topics: flash, shutter, camera, mode, film, lcd, button, autofocus, indicator, lens, flash mode, shutter...
6
6.0
Jan 15, 2021
01/21
by
Ricky Cheng (RickyCheng)
data
eye 6
favorite 0
comment 0
Techart Pro LM-EA7 Adapter(Techart) is an amazing product that allows vintage lenses supporting auto-focus in Song a7ii series. However, its structure is not strong enough when "heavy" SLR lens are adapted on it. The Lens will tilt downward by gravity and you will hard to get a sharp image. Also, the weak structure affects the focusing stability and accuracy. This creation has the following objectives: - improve stability for heavy lens (Techart + Nikon adapter) - provide a more tidy...
Topics: Leica M, thingiverse, Camera, stl, Autofocus, LM-EA7, Leica R, Techart Pro, Sony E
Topics: shutter, flash, camera, autofocus, mode, button, film, batteries, lcd, release, shutter release,...
generalmanual 000006853
Topics: flash, camera, shutter, mode, autofocus, battery, film, button, release, lens, shutter release,...
generalmanual 000020190
Topics: focus, exposure, flash, dial, metering, shutter, button, autofocus, camera, lens, exposure...
4
4.0
Mar 8, 2021
03/21
by
Stefan Wiegand (Cover1987)
data
eye 4
favorite 0
comment 0
English (german see below): This is a holder for an motor focuser to mount at your Starlight Feather Touch 2" Focuser. I'm using a 28BYJ-48 stepper motor with ULN2003A breakout board. With this itemes you can use my parts plug and play! You can find the hole projcet with arduino software/scrip and wiring here: https://github.com/fehlfarbe/arduino-motorfocus Thank you fehlfarbe for your nice Project! Screws you need to fix the motor and the mount: DIN 912 M3x8 (3x) DIN 912 M3x20 (2x) DIN...
Topics: Focus_Tool, stl, thingiverse, autofocus, Camera, feathertouch, feather, telescope, Focus,...
Topics: flash, shutter, camera, button, mode, autofocus, release, film, battery, press, shutter release,...
generalmanual 000013585
Topics: leica, exposure, lens, flash, automatic, minilux, zoom, autofocus, iso, viewfinder, leica minilux,...
Topics: flash, shutter, camera, autofocus, battery, film, release, lens, button, lcd, shutter release,...
8
8.0
Mar 10, 2021
03/21
by
Hank Dietz (profhankd)
data
eye 8
favorite 0
comment 0
The Kiev 10 was the first Soviet-built 35mm SLR with automatic exposure. It did this using an internal linkage for the body to control the lens aperture -- there is no aperture control ring on the lens. The same lens mount was used by the Kiev 15 TEE, but nothing else, and the internal aperture linkage makes adapting to another mount problematic. Thing 1464062 is an adapter I designed to mount these lenses directly on Sony E bodies, allowing a slight turn of the lens to adjust the aperture....
Topics: Kiev_1015, LM-EA7, Techart Pro, stl, thingiverse, Camera, Autofocus, Leica M, Sony E
Trying to live our lives on autofocus will always give us the wrong focus. What can we learn from Noah to focus our watching, so that we are ready when Jesus returns? Parts: A. Our times are similar. B. Our faith is the same. Preached on November 27, 2011, for the First Sunday in Advent, at St. John's Ev. Lutheran Church, Hancock, MN. Print copy at http://hancocklutheran.org/sermons/Focus-Your-Watching,-Just-As-Noah-Did-Genesis6_1-3,5-14A,17-22.html
Topics: flood, noah, judgment, God's patience, focus, unfocused lives, worldliness, autofocus, religion,...
3
3.0
Mar 5, 2021
03/21
by
Nick Meek (nameek)
data
eye 3
favorite 0
comment 0
This is an adaptor plate to upgrade a 2GN size gearbox to a Nema17 geared stepper motor. I am using this to upgrade the bed on my laser cutter from a manually controlled DC gear motor to a NEMA 17 geared stepper motor. This will allow the laser controller to auto-focus and adjust the height of the laser head during the cutting/engraving process. Slotted holes accept a bolt circle of 28-35mm on the stepper motor gearhead, 65.5-74.5mm for the gear motor. Offset of 10mm is maintained, making it...
Topics: DIY, geared, stl, stepper_motor_mount, laser, autofocus, adaptor, nema17, gearmotor, adapter,...
9
9.0
Apr 27, 2021
04/21
by
Hank Dietz (profhankd)
data
eye 9
favorite 0
comment 0
M42 is the "universal" screw thread mount for SLRs that is usually associated with Praktica and Pentax. It was actually used by many brands, including Fujica, Mamiya/Sekor, and Zenit. Because it is an open standard and has a relatively long flange distance, it has also been a very popular mount for adapting to other mounts (notably excluding Nikon F). There are many commercial adapters for M42 lenses to other mounts, including Leica M. Ok, so why 3D print this one? Because we can...
Topics: thingiverse, Camera, LM-EA7, Techart Pro, M42, M42 lens mount, stl, Autofocus, Leica M, Sony E
5
5.0
Jan 21, 2021
01/21
by
Hank Dietz (profhankd)
data
eye 5
favorite 0
comment 0
The [Argus C3](https://sites.google.com/site/fromthefocalplanetoinfinity/argusc3) 135-film rangefinder camera, made in Ann Arbor, Michigan from 1939-1966, is a bit of American history. About 2 million of "The Brick" were made, and many survive. The interesting thing is that the clunky camera used screw-thread-mount lenses that are simply adorable: tiny and exquisitely well made. Some lenses were made by Bausch & Lomb, others by Enna Werk in Germany, and a few came from Japan....
Topics: LM-EA7, Camera, thingiverse, Sony E, Argus C3, Techart Pro, Leica M, autofocus, stl, C3 lens mount
2
2.0
Jun 10, 2021
06/21
by
K. Bahr (K_Bahr)
data
eye 2
favorite 0
comment 0
A spring loaded mount for the ZWO EAF on the TS 2.5 RAP draw tube. additional material needed: - T5/200 timing belt - two grub screws (to attach the gears) - 2 long screws e.g. (60mm x 4mm) or 4 grub screws to attach the Cover - 2 small but strong springs
Topics: RAP, astro, ZWO, ASCOM, astronomy, thingiverse, Hobby, Focuser, telescope, rack and pinion,...
11
11
Apr 27, 2021
04/21
by
Hank Dietz (profhankd)
data
eye 11
favorite 0
comment 0
Canon has been a very popular camera brand for a very long time, making a lots of cameras and lenses with various mounts. In 1964, Canon introduced the FL mount for 135 film SLRs, an exceptionally well-engineered mount using a wear-free breech lock. In 1971, they upgraded that to FD mount, which basically added camera coupling for automatic aperture control. The catch is that changing lenses is slower and more awkward than using bayonet mounts... so, in 1978, Canon made the disturbingly clever...
Topics: thingiverse, Camera, LM-EA7, Techart Pro, stl, Autofocus, Leica M, Canon FDn, Sony E, Canon FD,...
9
9.0
Apr 27, 2021
04/21
by
Hank Dietz (profhankd)
data
eye 9
favorite 0
comment 0
Minolta used to be one of the more popular brands of 135 film SLRs and lenses. In fact, they were one of the very few lensmakers making their own glass, and their lenses are well known for exceptionally consistent color -- they famously even made some lenses for Leica. Minolta introduced their SR bayonet lens mount in 1958 and, with minor variants labeled MC and MD, continued producing lenses in that manual-focus mount until 2001. (Do not confuse these with the incompatible Minolta autofocus...
Topics: Minolta MC, thingiverse, Camera, LM-EA7, Techart Pro, stl, Autofocus, Leica M, Minolta MD, Sony E,...
67
67
texts
eye 67
favorite 0
comment 0
generalmanual 000032447
Topics: lens, hood, infrared, focusing, filter, autofocus, align, dot, manual, canon, red dot, manual...
2
2.0
Sep 13, 2021
09/21
by
Tommy Wlasichuk (tommyent)
data
eye 2
favorite 0
comment 0
An Automatic ASCOM Compliant Electronic Focuser for Telescope Astrophotography. This box is designed to fit one Nema 17 stepper motor, along with the electrical components for an electric focuser. The top portion fits a standard 50mm x 70mm prototype board which is more than enough to fit an ardunio nano, a driver, and a voltage regulator. There is a USB mini port on the side, along with a DC plug and a keystone jack. The keystone jack is for accessories like a hand controller and a temperature...
Topics: Focuser, stl, astrophotography, thingiverse, Tommy's, Autofocuser, EF-02, Telescope_focuser,...
2
2.0
Apr 4, 2021
04/21
by
Philippe Cesbron (Phio79)
data
eye 2
favorite 0
comment 0
Cet outil vous aidera grandement à régler les problèmes de Front focus ou de Back focus dont sont parfois (souvent) victimes les objectifs de nos reflex photo, à condition que votre boîtier dispose de l'option du micro-réglage de l'autofocus. Je joint également les graphismes en PDF à imprimer sur un papier épais puis coller, et la boite que j'ai modélisé pour ranger la mire. Niveau à bulle (un peu plus de 2€ livraison comprise , pas indispensable mais bien pratique)...
Topics: thingiverse, chart, calibration, objectif, photographie, tools, outils, Focus_Tool, lens,...
Topics: zoom, flash, autofocus, olympus, lens, film, auto, stylus, exposure, indicator, zoom lens, camera...
