3
3.0
Mar 9, 2021
03/21
by
Ridge Houmes (MechanicalNinjineer)
data
eye 3
favorite 0
comment 0
This is a model of "Icewave" from the tv series "Battlebots". I've designed it to be to scale with the Push strike Battlebot toys (From Hexbug) as long as you print all files at 110%.
Topics: stl, thingiverse, Mechanical Toys, hexbug, icewave battlebot, icewave, battlebot, hexbug battlebot
2
2.0
Mar 31, 2021
03/21
by
CHRIS MIKSOVSKY (chrismik)
data
eye 2
favorite 0
comment 0
This is my antweight (1lb) combat robot, "Blue Screen of Death". This is Version 2.0, which features a number of refinements over the original (version 1.0 is shown pictured with my hand). This bot is designed to be machined on a CNC mill, although obviously you could print the parts on a 3D printer. However, the weapon system is designed to work with a support bearing, which will require you to modify (machine) the weapon motor. And, the weapon itself is machined from aluminum. You...
Topics: thingiverse, battlebot, Robotics, antweight, stl, antweight_battlebot
2
2.0
Mar 13, 2021
03/21
by
Julian Irizarry (LumakidT)
data
eye 2
favorite 0
comment 0
I made this remix of the Krave Monster motor mount so I can run 4WD with the Team Panic wheels for my version of Krave Monster (pictures coming when I finish the robot) which I'm calling Cereal Killer.
Topics: thingiverse, battlebots, battlebot, stl, antweight_battlebot, 3D Printing
2
2.0
May 1, 2021
05/21
by
Justin Benedick (goodBEan)
data
eye 2
favorite 0
comment 0
So this is is a custom blade that you can use with [my replacement tombstone front end](https://www.thingiverse.com/thing:4839610). Besides the parts for the front end all you need are 4 screws. The ones I used were 27mm long, shaft is 3.2 and the head is 8mm wide. To be honest if can find a few spare screws that fit. Fusion file is included.
Topics: stl, battlebots, Mechanical Toys, battlebot, thingiverse, hexbug_battlebot
3
3.0
Mar 25, 2021
03/21
by
Steven Sawicki (FreeManForever1)
data
eye 3
favorite 0
comment 0
tried my hand at making a shell and drum for my friend as a gift and he liked it and said I should publish it here. in terms of hardware I gutted a hexbug Minotaur battlebot and had screws left over, so I'd recommend that one because god forbid you drop one of those screws you'll never see it again. hope you all enjoy, may burn through batteries a little fast because it only runs on two instead of 3. Definitely a work in progress so if you find any issues please voice them so they can be fixed!...
Topics: stl, battlebots, battlebot, thingiverse, hexbug_battlebot, 3D Printing, hexbug
4
4.0
May 20, 2021
05/21
by
Alexander Day (Day_Team_Design)
data
eye 4
favorite 0
comment 0
For people wanting to adapt their hexbug tombestone into rainbow from battlebots. Fits around the center shaft bearing. If the bar doesn't roll on the bearing efficiently then file until it is runs freely.
Topics: antweight, Accessories, combat_robot, thingiverse, battlebots, combat_robots, hexbug_battlebot,...
2
2.0
Aug 9, 2021
08/21
by
Adam V (itzAdam)
data
eye 2
favorite 0
comment 0
Did your WD2 drum break or you don't want it anymore now? Now you have slap box lifter, it will be static but it is very low to the ground. Can be used to make Duck 3.0 bill.
Topics: hexbug, thingiverse, hexbug_battlebot, battlebot, R/C Vehicles, stl
2
2.0
Mar 15, 2021
03/21
by
Peter Hubenett (Frostgear)
data
eye 2
favorite 0
comment 0
For use with a fingertech weapon hub. Cut out shape for when making weapons in cad. I put 3mm thick posts that line up where the screw holes are on the hub.
Topics: 3D Printing, thingiverse, battlebot, antweight_battlebot, combat_robot, stl
3
3.0
Mar 15, 2021
03/21
by
Andrew Kazmer (TeamLiftoff)
data
eye 3
favorite 0
comment 0
This is a super simple 4WD wedge bot for N20 motors and LEGO wheels. I recommend printing the chassis and wheel hubs out of TPU or Nylon, and fabricating to the top plate and wedge from aluminum. Be aware, this design requires a very thin battery. In the configuration I use, the bot weighs around 12 ounces.
Topics: beginner battlebot, minibot, thingiverse, Robotics, battlebot, antweight, wedgebot, stl
2
2.0
Oct 14, 2021
10/21
by
Kaden D'Abate (DAB0002)
data
eye 2
favorite 0
comment 0
My own Battlebots design with 2 saw blades, 2 wedges and a swivelling head that shoots fire. Eventually I will print this and make a working metal version.
Topics: thingiverse, battlebots, R/C Vehicles, battlebot, stl, battlebot_design
1
1.0
Jan 18, 2022
01/22
by
Euan Walker (FiregirlRobotics)
data
eye 1
favorite 0
comment 0
A solid entry level antweight (150g) combat robot. Comes with two bodies - one with a scoop to get under other robots wheels, and one as a simple pusher. Use as in for a non-destructive / plastic league, or add a metal sheet in front of the arms and push spinners into pits in a combat league. Great build for beginners as it is both light, and had a big open cavity to put all the electrics and motors in. The front arms make this a bit bit for a UK bot, but you could trim as needed. Has mounts...
Topics: antweight, battlebot, Robotics, thingiverse, antweight_battlebot, combat_robot, fairyweight, stl
3
3.0
Mar 31, 2021
03/21
by
Emmanuel Carrillo (emancarrillo)
data
eye 3
favorite 0
comment 0
***This is not a design for absolute beginners. Please build either my Flipper or Hammer robot if you do not have a safe arena to fight this in. *** This is a 150g combat robot. I'm attaching the.STEP file as well for those who want to edit. The weapon is to be cut out of 1/8" (3mm) Titanium. I'm supplying the DXF. I recommend using SendCutSend.com to get your blades cut. Ordering more than 1 greatly reduces the price. The motor mount can also be laser cut out of 3mm acrylic or 3D printed....
Topics: combat_robot, thingiverse, fairyweight, battlebot, Robotics, antweight, 150g, micro_battlebot,...
2
2.0
Jun 10, 2021
06/21
by
Josh Cragg (JC2017)
data
eye 2
favorite 0
comment 0
LowMow Under Cutter Antweight. ================== This was made as a CNC robot out of UHMWPE for strength as shown in the photos. However if printed in NylonX or similar this would still be highly competitive. You'd need to thicken parts in order for this to not destroy itself in other printed materials. CAD FILES TO WORK WITH. ----------------------------------------- If you would like to customise this, the CAD files are available for you to play with here:...
Topics: antweight_battlebot, Robotics, thingiverse, combat_robot, battlebots, battlebot, antweight, stl
1
1.0
Jan 18, 2022
01/22
by
For Yeh (yehsk8rz)
data
eye 1
favorite 0
comment 0
Simple rack for keeping all your Battlebots Hexbug IR controllers together.
Topics: hexbug, battlebot, organizer, thingiverse, controller, hexbug_battlebot, stl, Mechanical Toys
5
5.0
Jan 20, 2021
01/21
by
Nicolás Díaz (nicoclub)
data
eye 5
favorite 0
comment 0
Este es el corte láser del Demonio, robot usado por mi en la Liga de Robótica Chile.
Topics: battlebot, stl, Robotics, thingiverse
2
2.0
Jan 4, 2021
01/21
by
Julian Irizarry (LumakidT)
data
eye 2
favorite 0
comment 0
This remix is a simple fix. I removed anything that could possibly rub against the wheel from the wheel well. This is now V3 of Luma's Plow 150.
Topics: 3D Printing, stl, antweight, battlebots, antweights, battlebot, antweight_battlebot, thingiverse
4
4.0
Jan 6, 2021
01/21
by
Emmanuel Carrillo (emancarrillo)
data
eye 4
favorite 0
comment 0
Suplex Robot. This is a 150g combat robot., This is a varation on my Flipper with most parts interchangeable between the two. I'm attaching the .STEP file as well for those who want to edit. As well as a 3D PDF to reference the assembly. Very simple build that doesn't require extra tools. Wedges can be printed or cut out of sturdy material. 0.5mm Titanium is ideal. But Plexi/Acrylic also works as well. Printed wedges work fine if you're just flipping things around the house. Assembly tricks: I...
Topics: stl, antweight, combat_robot, battlebots, battlebot, antweight_battlebot, thingiverse, Robotics
2
2.0
Jul 22, 2021
07/21
by
Ethan Prescott (beeub)
data
eye 2
favorite 0
comment 0
This is a battle bot that will spin the shield while driving around. It will be sort of like Captain Shederator the battle bot.
Topics: battlebot, stl, robot, rc battlebot, Robotics, captain america, shield, thingiverse
2
2.0
May 20, 2021
05/21
by
Alexander Day (Day_Team_Design)
data
eye 2
favorite 0
comment 0
Fun attempt at a styled disc. Single tooth, center of mass measured on fusion 360 software.
Topics: antweight, Accessories, combat_robot, thingiverse, battlebots, combat_robots, hexbug_battlebot,...
3
3.0
Jan 8, 2021
01/21
by
Scott Siegel (SiegelRacing)
data
eye 3
favorite 0
comment 0
This is a remix of another of Eman's amazing bots: https://www.thingiverse.com/thing:4627536 Both his "150g Suplex Battlebots" and our "Big Sup" are optional flipper arms, claws, links, and spacers that fit on his Flipper and our Big Flip. Big Flip is our remix of Eman's that lets you easily use the inexpensive, fast, and strong Corona DS-319HV: https://www.thingiverse.com/thing:4616666...
Topics: combat_Bot, Robotics, stl, antweight, fairyweight_battlebot, combat_robot, battlebots, 150g,...
2
2.0
Apr 30, 2021
04/21
by
Scott Siegel (SiegelRacing)
data
eye 2
favorite 0
comment 0
My 8-year-old son had become nearly unbeatable with Hugsey (horizontal grabber lifter). I saw a video of the 150g Esper and thought "A plow like that would really help the flipper take on Hugsey, and other bots." So I hacked together this plow as a proof-of-concept, which required some editing of the chassis. In theory, at some point we'll do a much cleaner design ;)
Topics: stl, 150g, fairyweight, antweight_battlebot, antweight, Robotics, thingiverse, fairyweight_battlebot
2
2.0
Jan 5, 2021
01/21
by
matthew mongold (chickenstriprobotics)
data
eye 2
favorite 0
comment 0
Hexbug Battlebots shell spinner! A template used to make full body spinners using the build your own bot full body spinner attachment as well as the wheeled chassis (Unfortunatly doesnt work with the treaded bot) I used PLA, and i put it at arround 70% infill, so if you are making it id do nothing higher though nothing too low as the walls are somewhat thin Anyway, enjoy!
Topics: hexbug, stl, Toy & Game Accessories, battlebots, battlebot, thingiverse, hexbug_battlebot
1
1.0
Jul 22, 2021
07/21
by
Alex Posey (Posey)
data
eye 1
favorite 0
comment 0
Lifesteal is a custom robot that will compete in the 1lb. Plastic Antweight Battlebot bracket, which is part of the AngryRoosterRobotics battlebots competition. It comes to a total of 370Grams in weight and was fully printed on an Ender 3 V2 Printer. Below will be everything you will need and have links to purchase all of the electronics particular to this build. - 2 N20 12V Geared Motors(Doesn't matter what RPM, however I prefer 500RPM for drive motors)...
Topics: battlebot, spinner, robotics, stl, robot, plastic_ant, Robotics, 1lb, antweight_battlebot,...
6
6.0
Jan 3, 2021
01/21
by
Aedan Bingham (BigSkyRobotics)
data
eye 6
favorite 0
comment 0
After many months version 2 of the wedge bot is finally here. Now lighter with less motors and space. An Antweight BattleBot!
Topics: R/C Vehicles, stl, robot, antweight battlebot, antweight, wedge, combat robot, battlebot,...
2
2.0
Jan 5, 2021
01/21
by
Scott Siegel (SiegelRacing)
data
eye 2
favorite 0
comment 0
Another remix of Eman's "150g Flipper Battlebot" project, https://www.thingiverse.com/thing:3186849 Also check out Alex's with video: https://www.thingiverse.com/thing:3933072 We had been hacking the big servos to get them to fit and gluing them in. We thought it was worth trying a stretched chassis that would make the servos easy to install and swap, while still staying 150g and 4" cube legal. We JUST made it :)
Topics: combat_Bot, Robotics, stl, antweight, fairyweight_battlebot, combat_robot, battlebots, 150g,...
3
3.0
Mar 25, 2021
03/21
by
Toby H (Pinfari13)
data
eye 3
favorite 0
comment 0
A miniature replica of Nightmare from Battlebots! This model represents the 2016-2019 incarnation of Nightmare with the new invertable arms and lack of wheel armor.
Topics: stl, battlebots, battlebot, thingiverse, Robotics
2
2.0
May 20, 2021
05/21
by
Alexander Day (Day_Team_Design)
data
eye 2
favorite 0
comment 0
A visually impressive (Hopefully) Disc that can still pack a punch.
Topics: antweight, Accessories, combat_robot, thingiverse, beetleweight, battlebots, combat_robots, stl,...
6
6.0
Jan 18, 2021
01/21
by
Kevin Littlejohn (silarsis)
data
eye 6
favorite 0
comment 0
Have hollowed out the front a bit for more space, removed some back struts because they were in the way for the wiring, and thinned the centre wall between motors so they fit closer in.
Topics: battlebot, stl, Mechanical Toys, thingiverse
9
9.0
Jan 9, 2021
01/21
by
Thomas Mead (tomead)
data
eye 9
favorite 0
comment 0
This is a work in progress and subject to revisions. This is an articulated wedge that will operate even when flipped over. It works by going under it's opponent until one of the screws in the wedge catches which forces it to fold in half with the wheels which are all the way to the back causes it to stand on end flipping its opponent. I designed this to use the Fingertech Silver Spark or Gold Spark motors with the bearing block mounts. The bearing blocks will fit into the recess on the sides...
Topics: thingiverse, stl, battlebot, Robotics, robot
2
2.0
Jul 3, 2021
07/21
by
Johannes B. (OMG-3D)
data
eye 2
favorite 0
comment 0
TweeeeT edition of the small pushing bot, designed for four servo motors SG90 and an ESP8266 microcontroller. The zip file includes the firmware, which can be easily loaded with the Arduino IDE. See also: https://www.thingiverse.com/thing:4888287 https://www.thingiverse.com/thing:4888304 https://www.thingiverse.com/thing:4888299 https://www.thingiverse.com/thing:4888298 https://www.thingiverse.com/thing:4888301 Printing: Choose material and printer settings as you wish. You can apply whatever...
Topics: esp32, RC_Car, R/C Vehicles, robot, ESP8266, battlebot, thingiverse, stl, antweight_battlebot,...
4
4.0
Mar 17, 2021
03/21
by
(dplumly)
data
eye 4
favorite 0
comment 0
Parts for a battle bot I made out of a Pololu Zumo, Arduino Pro Mini, Neopixel ring, custom shield, servo, N20 DC Motor, and Adafruit power board.. If you need a pointless hotdog chopping robot this is it! https://www.youtube.com/watch?v=ycVJtrEeL80 custom shield: https://oshpark.com/shared_projects/oaLAbNpZ Pololu Zumo: https://www.pololu.com/product/2506 Neopixel: https://www.adafruit.com/product/1463 Servo: https://www.adafruit.com/product/155 Charger: https://www.adafruit.com/product/390...
Topics: chop, robot, hotdog, hotdogs, battlebot, battlebots, robotics, stl, micro battlebot, thingiverse,...
2
2.0
May 20, 2021
05/21
by
Alexander Day (Day_Team_Design)
data
eye 2
favorite 0
comment 0
3 tooth disc, styled in a Son of Whyachi Style Disc
Topics: antweight, Accessories, combat_robot, thingiverse, battlebots, combat_robots, stl,...
3
3.0
Apr 4, 2021
04/21
by
Emmanuel Carrillo (emancarrillo)
data
eye 3
favorite 0
comment 0
Grab and Lift Robot. This is a 150g combat robot. Very simple build that doesn't require many extra tools. I'm attaching the .STEP file as well for those who want to edit and modify. This is designed to fight nondestructive robots. Flippers, hammers, wedges, etc. You will need to modify a bit for full combat and add 0.5mm titanium wedges for example. Assembly tricks: You can use a paper clip to attach the flipper to the servo arm and cut off the excess after its bent. However tapping the servo...
Topics: thingiverse, Robotics, combat_robot, stl, 150g, battlebots, antweight_battlebot, battlebot,...
2
2.0
Apr 2, 2021
04/21
by
Emmanuel Carrillo (emancarrillo)
data
eye 2
favorite 0
comment 0
Front Flipper Robot. This is a 150g combat robot. Very simple build that doesn't require many extra tools. I'm attaching the .STEP file as well for those who want to edit and modify. This is designed to fight nondestructive robots. Flippers, hammers, wedges, etc. You will need to modify a bit for full combat and add 0.5mm titanium wedges for example. Assembly tricks: You can use a paper clip to attach the flipper to the servo arm and cut off the excess after its bent. However tapping the servo...
Topics: combat_robot, thingiverse, fairyweight, combat_robots, battlebot, Robotics, antweight, 150g,...
3
3.0
Mar 31, 2021
03/21
by
Scott Siegel (SiegelRacing)
data
eye 3
favorite 0
comment 0
Squeezy is basically HugsEy V2. Now well underweight and quite competitive in "sportsman" (non-destructive / kid-safe) 150g robot combat. It's running a Malenki-Nano RX-TESC (Receiver-Triple ESC combo), 30:1 N20 motors, a KST DS215MG servo, some old XMod wheels and tires, and 300mah batteries. We saved significant weight gluing the claws to the arms. Even at 2 perimeters and full honeycomb the arms are WAY stronger than necessary for 150g non-destructive competition. The Malenki-Nano...
Topics: thingiverse, antweights, combat_Bot, combat_robots, battlebot, Robotics, antweight, combat_robot,...
2
2.0
Jun 11, 2021
06/21
by
Alexander Standke (xanderstrike)
data
eye 2
favorite 0
comment 0
Netsplit is an untested 150g combat robot in the style of Tombstone. It's the first robot I've designed or built, taking many cues from the other robots available on Thingiverse. It was designed entirely in Tinkercad. Hopefully once events pick back up I'll be able to fight it and see how it does. You'll need to print: 1x chassis 1x lid 2x motormounts 1x helper (optional, but prevents getting stuck on its back) 1x bar I've included a couple 3d printable options for bars, plus a dxf for a steel...
Topics: antweight_battlebot, fairyweight_battlebot, 150g, thingiverse, combat_robot, R/C Vehicles,...
2
2.0
May 20, 2021
05/21
by
Alexander Day (Day_Team_Design)
data
eye 2
favorite 0
comment 0
A Retro, but hard hitting disc, with some modern twists.
Topics: robot_wars, antweight, Accessories, combat_robot, thingiverse, battlebots, combat_robots, stl,...
4
4.0
Jun 21, 2021
06/21
by
thomas burgess (clrtherp)
data
eye 4
favorite 0
comment 0
this is a scale model of a Battlebot that I designed in Pro-Engineer years ago.
Topics: stl, thingiverse, battlebot, Model Robots
4
4.0
Mar 18, 2021
03/21
by
Emmanuel Carrillo (emancarrillo)
data
eye 4
favorite 0
comment 0
Hammer Robot. This is a 150g combat robot. I'm attaching the .STEP file as well for those who want to edit. Very simple build that doesn't require many extra tools. Wedges can be printed or cut out of a sturdy material. 0.5mm Titanium is ideal. But Plexi/Acrylic also work as well. If printing scale them in Z to make them thicker Hammer arm should be cut out of material like Aluminum or Steel. Use the print as a template to cut. The lego hub has tolerances to printed easily on my printer and be...
Topics: antweight, combat robot, 150g, Robotics, combat_robots, thingiverse, antweight_battlebot,...
3
3.0
Mar 21, 2021
03/21
by
(buhatkj)
data
eye 3
favorite 0
comment 0
These are the 3d-printed components of my 1lb class battlebot. This includes the weapon drum, weapon mount, front shovel/scoop, rear bumper/battery compartment, and wheel adapter. It is based around attaching these components to an aluminum electronics enclosure as the main body. This bot has yet to fight in it's first competition, but I hope to do so at DragonCon this fall :-)
Topics: stl, antweight, Robotics, rc, battlebot, thingiverse
8
8.0
Jun 10, 2021
06/21
by
Walt Perko (SolidWorksMagi)
data
eye 8
favorite 0
comment 0
A few more wheel designs for the miniFloppyBot robot kits ... A few sensor mount designs for the miniFloppyBot robot kits ... Another two top designs for the miniFloppyBot robot kits ... A top servo mount designs for the miniFloppyBattleBot robot kits ... A Hammer for miniFloppyBattleBots These parts and the initial uploaded miniFloppyBot kit (http://www.thingiverse.com/thing:1586465) are all part of the RoboGuts™ S.T.E.A.M. education program where teachers only help students find answers and...
Topics: robot, Robotics, 3dprinting, thingiverse, battlebot, stl
5
5.0
Jun 20, 2021
06/21
by
Spencer Linkous (slinkous)
data
eye 5
favorite 0
comment 0
Battlebots beater bar weapon assembly. For insect classes.
Topics: Robotics, battlebots, thingiverse, stl, battlebot, robot
2
2.0
Jun 21, 2021
06/21
by
Albert La (thesaxmachine)
data
eye 2
favorite 0
comment 0
Frame updated: Bearing blocks for motor mounts New weapon plate for motor mounting to prevent breaking of base weapon shaft changed to 1/4" OD added 1/2" ID bearing support for pulley
Topics: antweight, battlebots, Robotics, thingiverse, combat_Bot, antweight_battlebot, combat_robots, stl,...
5
5.0
Mar 16, 2021
03/21
by
Kevin Shultis (shultiskevin)
data
eye 5
favorite 0
comment 0
This is a remix of a remix. Original post is a 150g antweight called Blockhead by earthwormjim - https://www.thingiverse.com/thing:2812197 I remixed it to a 1 pound US ant and was super happy with it as a design. https://www.thingiverse.com/thing:3111090 This a V2 of my design, improving on what I saw in its first 5 fights of the V1 at mass destruction at maker fair NYC. - my original 180 mah battery conked out after about 90 seconds of full thrust (because math is hard). increasing to 450 mah....
Topics: battlebot, antweight, stl, thingiverse, R/C Vehicles
2
2.0
Oct 15, 2021
10/21
by
D.A. Stuart (Stuart800)
data
eye 2
favorite 0
comment 0
Erstmal Danke an OMG-3D für die tollen Schieberoboter. Diese Schieberoboter kann man vom Handy aus steuern, ohne das man auf dem Handy etwas installieren muss. Man muss nur mit WLAN die Seite auf dem WeMos D1 aufrufen. These pushing robots can be controlled from the mobile phone without having to install anything on the mobile phone. You just have to call up the page on the WeMos D1 with WLAN. Habe aus dem Uncle einen IHC 433 / Deutz 4006 / John Deere 830 / Fendt Farmer -Traktor gebastelt....
Topics: thingiverse, ESP8266, Robotics, battlebot, stl, wemos, robot, deutz, handy, tractor,...
3
3.0
Mar 5, 2021
03/21
by
Chris Charles (charlch)
data
eye 3
favorite 0
comment 0
A Wedge shaped robot body. Takes two of these motors: https://www.banggood.com/12V-DC-1000RPM-Large-Torque-Mini-Gear-Motor-4mm-Diameter-Shaft-Motor-p-1174094.html There are two options for the motor clamp on the back: 1. Simple clamp 2. Clamp with adaptor for accessories: Wheelie bar (yes it needs it!) Tow Hook Dozer blade/scoop
Topics: stl, battlebot, robotwars, Robotics, robot, sumo, thingiverse
2
2.0
Apr 4, 2021
04/21
by
Scott Siegel (SiegelRacing)
data
eye 2
favorite 0
comment 0
When you ask a six-year-old girl what type of tiny battlebot she wants, you should be ready to make her a crown spinner with hearts and flowers ;) So here it is, a low-speed, all plastic and not-too-sharp, full-body spinner. The Battlebot named Flowers :) I used a TPU wheel made to go on the N20 motors as a hub for the spinner. My hope is that it protects the motor and anyone that grabbed the crown while it was spinning. (The kids have run it into themselves plenty of time and not even a real...
Topics: thingiverse, fleaweight, antweights, Robotics, combat_Bot, drone, combat_robot, stl, battlebots,...
0
0.0
Apr 19, 2022
04/22
by
R R (r4stl1n)
data
eye 0
favorite 0
comment 0
## 001 - Horizontal Spinner BattleBot A 150g AntWeight (Euro) / FairyWeight (USA) bot printed in PLA. The bot materials / parts equal to around 140g giving you 10g to create your weapon out of a hard plastic/metal. This bot is primarily offensive focused as its body is only 1.6mm thick allowing for all extra weight to be spent on the 1806 Motor and 20amp ESC used to drive it. ### Shopping List: Components Used: 1. DYS 1806 2500kv Motor 2. AGFRC 20A ESC Brushless 3. HobbyKing OrangeRx R615X 4....
Topics: Robotics, thingiverse, stl, fairyweight, antweight, battlebot
4
4.0
Mar 3, 2021
03/21
by
john szymanski (johnszy)
data
eye 4
favorite 0
comment 0
This RC printable battle bot is a good beginner project. All parts are printed with PLA. The parts are designed to fit 2 - n30 gear motors with a 3mm drive shaft. Choose gear motors around 500rpm- 700rpm for best results. The electronics are available here: szymanskiWorks.com
Topics: battlebot, thingiverse, RC_Car, stl, Hobby
4
4.0
Mar 9, 2021
03/21
by
(Nolubr)
data
eye 4
favorite 0
comment 0
powermove is a 150g battlebot with a angled front spinner that needs to be custom made to fit. the wheels i linked might be to big for the spinner so it might be better to use your own. but the wheels need to be thin enough to fit. optionally you could use a small caster, but it would weigh a lot. the parts will need to be held in by adhesives like duct tape. parts needed...
Topics: stl, thingiverse, Robotics, antweight, fairy_weight, battlebot
