4
4.0
-
-
-
by
Gonzalo Luzardo (gonchalox)
data
eye 4
favorite 0
comment 0
Insta360Go mount for Beta95x v3 This is a remix of the following design: https://www.thingiverse.com/thing:4496361
Topics: thingiverse, beta85x, beta95x, stl, Toys & Games, Insta360Go
3
3.0
-
-
-
by
Timo Schriegel (klugitheultima)
data
eye 3
favorite 0
comment 0
Hier ein Gehäuse zum verstauen eines Beta FPV 95x v.3 mit aufgebauter SMO 4K Kamera und 3 Akkus. Es passen 4S Akkus von 450 mAh bis 650 mAh zusammen rein. Das Gehäuse gibt es mit und ohne Schriimo Logo https://youtu.be/pxEk6eGTfpw
Topics: Beta FPV, Gehä, use, thingiverse, 95x v3, SMO 4K, R/C Vehicles, Case, beta95x, stl
4
4.0
-
-
-
by
yingjie Gao (yingjiegao)
data
eye 4
favorite 0
comment 0
i built a reinforced version of Vista+Antennas+mount without TBS Mnt Holes for my Betafpv 95X+V2 from scratch to improve my former version in the pic
Topics: betafpv, stl, 3D Printer Parts, thingiverse, BetaFPV_95X, beta95x, beta95xv2
5
5.0
-
-
-
by
Marty McFlyFly (MartyMcFlyFly)
data
eye 5
favorite 0
comment 0
I build some tpuparts for this cheap but pretty nice chinewhoopframe. https://de.banggood.com/Hornet-115m-Wheelbase-2_5-Inch-Black-or-Red-Frame-Kit-With-Camera-Mount-for-Whoop-or-Cinewhoop-RC-Drone-FPV-Racing-p-1744777.html crossfire antenne mount cam mount strap holder vista antenna holder vista cam holder printed in tpu 100% infill (most parts without support)
Topics: 3D Printing, caddx, tbs, thingiverse, caddx_vista, bista, CineWhoop, crossfire, beta95x, banggood,...
4
4.0
-
-
-
by
Gianni de Simmeo (kokkogiambo)
data
eye 4
favorite 0
comment 0
betafpv 95x v3 parts for dji digital fpv and lite gopro cases
Topics: betafpv, 95x_v3, thingiverse, 95x, betafpv75x, beta95x, Hobby, stl
3
3.0
-
-
-
by
Gianni de Simmeo (kokkogiambo)
data
eye 3
favorite 0
comment 0
include the v1 gopro lite case version!!
Topics: betafpv, 95x, R/C Vehicles, stl, umma95, umma95x, thingiverse, gopro_lite, v2_pusher, beta95x
3
3.0
-
-
-
by
(nettunoroberto)
data
eye 3
favorite 0
comment 0
Support for Beta95X v2 with SMO 4K camera and Pusher Kit.
Topics: thingiverse, insta360, smo4k, pusherkitv2, R/C Vehicles, beta95x, stl, beta95xv2
3
3.0
-
-
-
by
Ez Coops (flowslinky)
data
eye 3
favorite 0
comment 0
Remixed version that allows you use the full size DJI FPV camera, plus the BetaFPV GoPro Lite case. I also made a thicker clean plate (for rigidity) which I printed in PETG, I found the original one from marblekit was a little too thin & bendy, this version is a similar rigidity to the carbon plate, plus in PETG it's held up in crashes ok. Print everything else in TPU. I've also included a mount for the insta360go camera, I'm still waiting for mine to arrive in the post, so haven't tried it...
Topics: stl, R/C Vehicles, thingiverse, umma95x, beta95, caddx_vista, umma95, beta95x_gopro_naked,...
3
3.0
-
-
-
by
Peli-Peli ... (peli_peli)
data
eye 3
favorite 0
comment 0
He modificado el diseño inicial alargando un poco mas el tren de aterrizaje para que estén las hélices mas lejos del suelo. además hay tres versiones con la parte interior mas grande por si se necesita mas espacio.
Topics: stl, Landing_Gear, beta95x_v2, betafpv, umma85x, betafpv_85X, Other, BetaFPV_95X, thingiverse,...
4
4.0
-
-
-
by
Den Gor (dengor)
data
eye 4
favorite 0
comment 0
Betafpv Pusher DJI Camera Mount (full size camera module)
Topics: R/C Vehicles, stl, dji_fpv, CineWhoop, beta85x, thingiverse, caddx_vista, fpv_camera_mount, beta95x
4
4.0
-
-
-
by
Steve Michelet (spawn94)
data
eye 4
favorite 0
comment 0
This is my first Thingiverse contribution. This part is made for Beta95x V3 Caddx Vista and Immortal T Antenna. Cette pièce est un support d'antenne pour Caddx Vista et Immortal T sur un Beta95 v3 Fusion360 file is include if you want to modify ! Please give me a feedback and your version :-)
Topics: betafpv, thingiverse, dji_vista, caddx_vista, DIY, beta95xv3, beta95x, stl, dji
6
6.0
-
-
-
by
Utkarsh Verma (mtaram)
data
eye 6
favorite 0
comment 0
Tail mount for the caddx vista antenna stem to hold it high on Betafpv 95x V3 frame
Topics: stl, beta95x, beta95xv3, BetaFPV_95X, thingiverse, 3D Printing, caddx_vista
3
3.0
-
-
-
by
Andrea Di Natale (dna87)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: jello, nano, betafpv, drone, fpv, R/C Vehicles, caddx, beta95x, pro, mount, naked, beta95, smo4k,...
4
4.0
-
-
-
by
ISMAEL GONZALEZ GONZALEZ (Vinylias)
data
eye 4
favorite 0
comment 0
Still in development. To put the ND Filter holder use three M2x4mm Screws.
Topics: 3D Printer Parts, gopro_naked_mount, gopro_lite, gopro_8_mount, GoPro_Mount, thingiverse,...
4
4.0
-
-
-
by
David Palma (Xarhvid)
data
eye 4
favorite 0
comment 0
+ This is another pusher configuration of the Beta95X - I used the Umma95 Caddx vista holder: https://www.thingiverse.com/thing:4345710 - I used my design TPU full Case for GoPro Hero 6 Naked https://www.thingiverse.com/thing:4561042 - You can use the stock fly controller and esc but I used a 20x20 mamba mini stack, I made a TPU adapter as well - All parts in TPU easy to assembly
Topics: GoPro_Hero_6, stl, betafpv, BetaFPV_95X, caddx_vista, umma95, beta95x, beta95x_gopro_naked, R/C...
6
6.0
-
-
-
by
Marty McFlyFly (MartyMcFlyFly)
data
eye 6
favorite 0
comment 0
before you print! this mount is only for modified gp naked v2 case with added LCD and betafpv bt2.0 powerconnector. parts used: lcd frame in petg https://www.thingiverse.com/thing:4638613 tbs nd filter adapter: https://www.thingiverse.com/thing:4597624 (also good antennamount btw) i removed the dampers from betafpv pusherkit and mounted all directly on the frame. printed the base in petg to get a stability maybe tpu works well. mount itself printed in tpu.
Topics: 95x, thingiverse, gopro naked, beta95x, upsidedown, 3D Printing, stl, betafpv
3
3.0
-
-
-
by
TaZx TaZx (TazX)
data
eye 3
favorite 0
comment 0
lens adapter for naked gopro , and filter support
Topics: 95x, beta95x, betafpv_85X, Naked_GoPro, ND_filter, naked, betafpv, stl, gopro_naked, Lens_Adapter,...
3
3.0
-
-
-
by
Gianni de Simmeo (kokkogiambo)
data
eye 3
favorite 0
comment 0
include the holder for the gopro lite v1 version
Topics: betafpv, 95x, R/C Vehicles, stl, umma95, umma95x, thingiverse, gopro_lite, beta95x
3
3.0
-
-
-
by
Israel Bonilla (dronotron)
data
eye 3
favorite 0
comment 0
This clips in the front of the frame allowing you to mount your lightweight camera where the hoops won't be seen Compatible with this mount: https://www.thingiverse.com/thing:4359372 and others
Topics: R/C Vehicles, stl, Insta360Go, thingiverse, fpv, fpv_camera_mount, beta95x
4
4.0
-
-
-
by
Kyle Li (kylejli)
data
eye 4
favorite 0
comment 0
A better design for the stock 95x v2 bottom plate to protect the bottom better. This does NOT come with a USB hole as the stock 95x has an upwards facing USB port rather than one facing down.
Topics: R/C Vehicles, FPV, stl, Bottom Plate, Beta95xv2, Beta95x, thingiverse
2
2.0
-
-
-
by
Alex Badasspilot (Badassdrones)
data
eye 2
favorite 0
comment 0
This is a pad I've designed to have a good and steady ground feet.
Topics: betafpv, 3D Printing, beta95x_gopro_naked, stl, CineWhoop, thingiverse, fpv, beta95x, drone
3
3.0
-
-
-
by
Luis MagFly (luismagfly)
data
eye 3
favorite 0
comment 0
Este diseño es para modificar el Beta95x HD con la Caddx Vista y llevar la Gopro LITE de Betafpv Todas las partes son con tpu impreso al 100% de infill Para montarlo solo es necesario cambiar 4 tornillos de los motores frontales por m2x8mm y agregar 4 tornillos m2x18mm mara montar la Vista. En este diseño, el video capturado por la Gopro LITE no esta invadido ni por la camara FPV o por el porta filtros nd. El portafiltros ND esta diseñado para montarlo y dejarlo fijo en la Gopro LITE y es...
Topics: stl, dji system, umma95, beta95x, betafpv, gopro lite, Hobby, naked gopro, dij fpv sistem,...
4
4.0
-
-
-
by
QUENTIN CAYET (skAtou)
data
eye 4
favorite 0
comment 0
This model is designed to mount a Gopro Hero 8 Full on the Betafpv 95X. The supporte should fit with hero 5/6/7. 5° and 10° versions.
Topics: goprohero8, stl, hero8_drone_mount, Camera, 95x_full_gopro, gopro_hero_8, thingiverse, BetaFPV_95X,...
4
4.0
-
-
-
by
Andrey Maglevanyy (maga_fpv)
data
eye 4
favorite 0
comment 0
Hero 6 Naked mount for BetaFPV Beta95X v3
Topics: beta95xv3, Naked_GoPro, hero6, beta95x, thingiverse, GoPro, stl, beta95x_gopro_naked, GoPro_Mount,...
3
3.0
-
-
-
by
Mr.Robot FPV (MrRobotFPV)
data
eye 3
favorite 0
comment 0
Rear mount smo4k for beta95x v2
Topics: beta95x, MOUNTSMO4K, thingiverse, beta95xv2, smo4k, Hobby, beta95x_gopro_naked, stl
3
3.0
-
-
-
by
Mr.Robot FPV (MrRobotFPV)
data
eye 3
favorite 0
comment 0
Mount Smo4k
Topics: beta95x, MOUNTSMO4K, thingiverse, beta95xv2, smo4k, Hobby, stl
5
5.0
-
-
-
by
TaZx TaZx (TazX)
data
eye 5
favorite 0
comment 0
Spacer for 95x
Topics: naked, betafpv_95x, spacer, Naked_GoPro, 95x, thingiverse, betafpv, 3D Printer Accessories, GoPro,...
4
4.0
-
-
-
by
Jeff Enriquez (jffry7)
data
eye 4
favorite 0
comment 0
This is a holder/adapter for UMMA95X to hold the naked gopro and caddx Vista camera together. This help reduce vibration on the FPV camera and make them solid. It also ease the alignment of camera tilt for both gopro and fpv camera. This is basically the same as the default tpu camera holder for the naked gopro but it just integrates the FPV cam Note: 2 file uploaded. One has a built in/print in support that can just be detached after printing. For those that want to save filament and put their...
Topics: naked gopro, R/C Vehicles, betafpv V2 case, stl, caddx vista, thingiverse, beta95x
3
3.0
-
-
-
by
Alex Badasspilot (Badassdrones)
data
eye 3
favorite 0
comment 0
I designed this to hold my beta95x V2 and V3 quads on my wood panel quad wall. Printing: You can print it in PLA or semi-flex filament such as TPU or polymaker polyflex (TPU works fine and is unbreakable) It's an easy print so you can use classic settings 0.2mm layers, 20% infill, 2 walls, 3/4 bottom/top layers... (just remember to keep your flex filament dry to avoid stringing) You'll need 2 M3 screws to fix it on your wall. As usual, feedbacks and tips are not required but much appreciated ;)...
Topics: betafpv, badassdrones, Quadcopter, R/C Vehicles, beta95x, beta95xv3, fpv, CineWhoop, tiny_whoop,...
4
4.0
-
-
-
by
Rafal Kiermacz (ulightme)
data
eye 4
favorite 0
comment 0
Print this in TPU.
Topics: caddx, betafpv, Immortal_T, thingiverse, 95x, caddx_vista, tbs, crossfire, Tbs_crossfire, beta95x,...
5
5.0
-
-
-
by
Torin Johnson (Troncat_FPV)
data
eye 5
favorite 0
comment 0
Replacement lens cap for a beta85x or 95x. Should work with any 12mm wide lens.
Topics: protector, lens, betafpv, thingiverse, beta85x, beta95x, camera, R/C Vehicles, beta95xv2, stl
3
3.0
-
-
-
by
Matt Renshaw (vicewize)
data
eye 3
favorite 0
comment 0
A new mount for the Caddx Vista for the V2 pusher from BetaFPV. Use existing bolts that hold the Caddx Vista to the top plate. Use 1 small zip tie around antenna to secure it just below top of antenna.
Topics: beta95x_gopro_naked, stl, Hobby, fpv_racer, umma95x, thingiverse, fpv, caddx_vista, beta95x,...
4
4.0
-
-
-
by
Matt Renshaw (vicewize)
data
eye 4
favorite 0
comment 0
I designed a mount for the Beta95X for the Video Aerial Systems (VFAS PRO) TBS Crossfire Antenna. Just use two zip ties, doesn't block signal in anyway. Print in TPU. Look for more of my designs to be posted soon.
Topics: betafpv, beta95x_gopro_naked, stl, Hobby, betafpv_pusher, Naked_GoPro, fpv_racer, naked_cinewhoop,...
4
4.0
-
-
-
by
Den Gor (dengor)
data
eye 4
favorite 0
comment 0
Remixed from https://www.thingiverse.com/thing:2390257. Used to give enough clearance for the Caddx Vista in a Beta85x Pusher cinewhoop build.
Topics: R/C Vehicles, beta95x_gopro_naked, stl, beta85x_HD, spacer, beta85x, thingiverse, caddx_vista,...
3
3.0
-
-
-
by
Ray Noland (iamnoland)
data
eye 3
favorite 0
comment 0
This is my first public upload. Modified to fit a Caddx Turbo EOS1 camera which is 14mm. I just used Tinkercad to fill in the original holes and create new mounting holes. It's not perfect but It'll do the job. This is a really great canopy! Super sturdy and thick walls. I've printed numerous other canopy designs and find the walls way to thin. This guy will take a few crashes! I printed in ABS. I'll try TPU next. My camera is at a 40º angle and the props are out of fpv sight.
Topics: beta95x, canopy, thingiverse, whoop, stl, R/C Vehicles, CADDX
3
3.0
-
-
-
by
Gerd Staudenmaier (Gerd_S)
data
eye 3
favorite 0
comment 0
I was tired about the agressive takeoff behaviour of my Beta 95X, caused by hanging up to 45° to one side. So I 3D-printed a stand/foot which is simply pushed between battery and strap. The 95X stands levelled now and takeoff is much more controllable. This stand/foot could be used for similar whoops in same way.
Topics: thingiverse, stl, foot, R/C Vehicles, beta95x, stand
5
5.0
-
-
-
by
Jay Arendain (Jaddyfpv)
data
eye 5
favorite 0
comment 0
Made specifically for the stripped or naked GoPro hero 6/7/8 lens. This is a filler ring that allows you to use GoPro hero 3/4 Nd filters or protective lenses on the naked GoPro lens. The ring will fit very snug and you will be able to push it all the way back until it lifts on to the o-ring retainer. I have bonded mine to the lens itself so it will not move.
Topics: beta85x, beta95x, 3D Printing, umma85, Naked_GoPro, stl, thingiverse, umma95
5
5.0
-
-
-
by
TaZx TaZx (TazX)
data
eye 5
favorite 0
comment 0
Print for betafpv 95x or 85x with naked gopro and caddx vista
Topics: beta85x, 95x, beta95x, betafpv_85X, Naked_GoPro, naked, betafpv, stl, support, thingiverse,...
3
3.0
-
-
-
by
Gerd Staudenmaier (Gerd_S)
data
eye 3
favorite 0
comment 0
The Beta 95X from BetaFpv is a nice little whoop with DJI's digital video system using Caddx Vista. However, BetaFpv failed both with delivering an acceptable canopy and providing jello-free video. A better canopy design is already available here for printing with TPU: https://www.thingiverse.com/thing:4330877/comments But still the video has jello, so I designed simple dampers for soft-mounting the whole canopy and using its mass for stabilisation. The result is such as BetaFpv should have...
Topics: anti_jello, caddx_vista, thingiverse, R/C Vehicles, stl, beta95x
4
4.0
data
eye 4
favorite 0
comment 0
found the files on betafpv support site, its hidden deep down so posting here since post people search for files here. Credit: Betafpv. Can be used with Beta85X and Beta95X.
Topics: betafpv, thingiverse, fpv_camera_mount, DIY, beta85x, Insta360_Go, beta95x, fpv, stl
4
4.0
-
-
-
by
Rodrigo Sclosa (rodrigo_sclosa)
data
eye 4
favorite 0
comment 0
Better lens cover for Insta360 Go to mount on Beta95X V3 Frame. This is a remix of https://www.thingiverse.com/thing:4496361 (Tks Thingiverse for a broken Remix search :/ )
Topics: beta95x_v3, insta360, betafpv, thingiverse, beta95x_insta360go, Insta360_Go, beta95x, Hobby, stl,...
3
3.0
-
-
-
by
Vinnie Mah (VinnieMah)
data
eye 3
favorite 0
comment 0
This is my design for mounting the Foxeer Lollipop to the TBS mounting board on the Beta95X V2. Please make sure you have the same hardware as me before deciding on this mount. Overall, the TBS mounting board will be misaligned because of the thickness of the vtx antenna wire. However, I find it not much of a big deal since I am not using that 2 mounting holes. If you want it to sit flush, perhaps file the TBS mounting board or the CF frame of the 95x. The antenna wire isn't bent in a stressful...
Topics: vtx_antenna_holder, R/C Vehicles, beta95x_gopro_naked, stl, ummagawd, ummagawd_remix, umma95x,...
4
4.0
-
-
-
by
Gee Gantic (g_gantic)
data
eye 4
favorite 0
comment 0
Topics: thingiverse, jello, beta95xv3, beta95x, R/C Vehicles, stl
5
5.0
-
-
-
by
David Anzalone (David125)
data
eye 5
favorite 0
comment 0
This is a mount to replace the stock crap VTX of the betafpv 85x and 95x the mount is made to work with 4 m2 screws using the same holes of the stock vtx print it in tpu, 100% infill 2 versions: with Air Scopes and without the first it's better EDIT v4: I made a little modify to move the vtx 1mm backward and cut a "window" for the button, otherwise when using the ziptie the button is always pressed EDIT v5: More AirFlow
Topics: betafpv, tbs, thingiverse, TBS_unify_mount, beta85x, TBS_Unify, beta95x, R/C Vehicles, stl
4
4.0
-
-
-
by
Marty McFlyFly (MartyMcFlyFly)
data
eye 4
favorite 0
comment 0
I build some tpuparts for this cheap but pretty nice chinewhoopframe. https://de.banggood.com/Hornet-115m-Wheelbase-2_5-Inch-Black-or-Red-Frame-Kit-With-Camera-Mount-for-Whoop-or-Cinewhoop-RC-Drone-FPV-Racing-p-1744777.html crossfire antenne mount cam mount strap holder vista antenna holder vista cam holder printed in tpu 100% infill (most parts without support) added bumbers, lighter vista cam mount and flatter lipostrap mount. (v2)
Topics: 3D Printing, caddx, tbs, thingiverse, CineWhoop, crossfire, beta95x, banggood, stl, vista, dji
5
5.0
-
-
-
by
Thibaut Le Mouel (ThibautLM)
data
eye 5
favorite 0
comment 0
Simple mount for the New Insta360 Go 2 BetaFpv x95 V3
Topics: stl, Insta360_Go, betafpv, Camera, beta95x_insta360go, Insta360Go, BetaFPV_95X, thingiverse
4
4.0
-
-
-
by
Mirko Galloni (PackyFPV)
data
eye 4
favorite 0
comment 0
After weeks of work and tests, here is our Dison95X! Inspired by Rimzler's Dison Mini V3, our model allows you to mount a naked GoPro (17g) on a digital Betafpv 95x with Caddx Vista to obtain a very versatile powerful cinewhoop. Use it for either a slow, smooth cinematic flight or a more fast-paced one, thanks to its special junction which lets you vary the camera tilt angle from 0 to +50°! The base features a series of markers that will help the pilot change the camera tilt to 10, 20, 30, 45...
Topics: GoPro, Hobby, betafpv, fpv, BetaFPV_95X, caddx_vista, CineWhoop, Naked_GoPro, beta95x, stl, CADDX,...
4
4.0
-
-
-
by
Hanspeter Lassnig (4runner)
data
eye 4
favorite 0
comment 0
###It's all about looking good, flying anyway, have fun. Was a normal Beta95X.
Topics: fpv, CADDX, quad, drone_racing, caddx_tarsier, thingiverse, CineWhoop, fpv_racing, Diydrones,...
4
4.0
-
-
-
by
Kyle Li (kylejli)
data
eye 4
favorite 0
comment 0
A flat bottom plate with landing gears for the Beta95x v2 without any holes at the bottom. Replaces the existing plate.
Topics: drone, stl, thingiverse, DIY, beta95x, beta95xv2
3
3.0
-
-
-
by
TaZx TaZx (TazX)
data
eye 3
favorite 0
comment 0
Beta 85 x/ Beta 95 x analog support
Topics: 85x, gopro_naked_mount, 3D Printer Accessories, BetaFPV_95X, 95x, GoPro_Mount, thingiverse,...
