0
0.0
Jun 10, 2021
06/21
by
Typical Titan (TypicalTitan)
data
eye 0
favorite 0
comment 0
remixed from: https://www.thingiverse.com/thing:3966593 (thingiverse remix search isn't working) Buttons are slightly off but it works. I also included a part with holes for adapting a prusa style mount. These parts are provided free of charge under Creative Commons - Attribution - Non-Commercial - Share Alike license. This comes with out any warranty, guarantees, or liability for the files or parts produced with them. You are responsibly for assessing the strength and appropriate application...
Topics: tft24, TFT_Screen, bigtreetech_tft24, 3D Printer Parts, thingiverse, reprapdiscount, Qidi_Tech,...
2
2.0
May 1, 2021
05/21
by
(thekwijibo)
data
eye 2
favorite 0
comment 0
Remixed for extra 70mm CPU fans. Redesigned air turning vanes Remixed main body for clip-on 2020 extrusion mount Added MOSFET 2020 extrusion mount Added different grill cover Added spacers for grill cover to reduce noise
Topics: stl, BTT, electronics_enclosure, BTT_SKR_14, enclosure, SKR, 3D Printer Parts, skr_14, thingiverse,...
0
0.0
Aug 9, 2021
08/21
by
Joseph Smith (3dsmitty)
data
eye 0
favorite 0
comment 0
Upgrading my printer controller board to a BTT Octopus v1.0. Just needed a face plate to work with the existing controller box so I modified twhite0101 great design to fit my needs. Hope this helps other people that decide to upgrade their printers to this great controller board. Included the FreeCAD model file I used to make the modification, enjoy! You may need / want to flip it over 180 degrees in your slicer to print it.
Topics: thingiverse, octopus, 3D Printer Parts, bigtreetech, BTT, stl
0
0.0
Mar 9, 2021
03/21
by
Thierry Parent (tparent)
data
eye 0
favorite 0
comment 0
REmix of the original design https://www.thingiverse.com/thing:4536478 to give the ability to use a Bigtreetech mixing head Mainly : - additional screw holes - extended blow pipes
Topics: bigtreetech, stl, thingiverse, geeetech_A10M, Geeetech_A10, headmount, 3D Printer Parts
1
1.0
Jan 6, 2021
01/21
by
Otto Hauser (XylenC4)
data
eye 1
favorite 0
comment 0
Marlin 2.x is not running well anymore on old MEGA2560 boards, so I decided to get my UM2 up and running again with new hardware. This case is made to use the bores of the spool holder in the back so you don't have to drill anything in this beautiful case. My spool holders are mounted from the side, so I don't use this holes anyways. This does fit an SKR 1.3/1.4 and a Raspberry Pi 3 / 4. It is not really necessarily to use a cooling fan as there is no heat-issue using TMC2209. As on my fault I...
Topics: bigtreetech_skr, 3D Printer Accessories, stl, raspberry_pi_case, thingiverse, case, UM2, UM2_upgrade
0
0.0
May 1, 2021
05/21
by
Michał Dudys (Dojdyl)
data
eye 0
favorite 0
comment 0
Hi all, I wanted to mount my TFT35 E3 V3.0 and PITFT50 BTT screens to LACK enclosure, so here we are - I've designed mounts to achieve that. Screen cases are remixed models taken from: https://www.thingiverse.com/thing:4221768 https://www.thingiverse.com/thing:4741768 Clip for screen holder based on: https://www.thingiverse.com/thing:1074129 Mounts itself have never been tested in real life - on the picture you can see early slide-on design. Uploaded design is still WIP and works like a clip....
Topics: stl, TFT35, bigtreetech_tft35_v3, TFT50, PI_TFT50, BIGTREETECH_PITFT50, btt_tft35, BTTPITFT50, tft,...
0
0.0
Jun 10, 2021
06/21
by
Thomas Feger (Flash_F)
data
eye 0
favorite 0
comment 0
This adapter attatches the TFT35 E3 V3 onto the controllerbox of the CR10(s) in such a way that the USB-port and SD-slot can be easily accessed. The baseplate is attatched to the original screen mounts inside of the box with the original screws. The upper part then screws onto the inner part from the outside of the housing using self tapping screws. Finally the display can be mounted at the standoffs with self tapping screws aswell. A lid for the screen itself will be designed in the near...
Topics: CR10, Creality, BIGTREETECH_TFT35, TFT35, BTT, thingiverse, cr10s, 3D Printer Accessories, stl
0
0.0
May 1, 2021
05/21
by
Fabien HEUSSLER (seebaf)
data
eye 0
favorite 0
comment 0
Hi, I've made a universal mounting support for the Bigtreetech SKR 1.2 Pro mainboard. All holes fit perfectly to the board + wifi option. Enough room for cable management and I2C eeprom option mounted directly on the board. Step file included so anyone can mod to it's needs. Enjoy. Printed mine with LONGER LK4 pro with white PETG. Added 6 custom supports in cura for better print but it should print well without supports.
Topics: stl, bigtreetech, BTT, SKR, thingiverse, 3D Printing, bigtreetech_skr
0
0.0
Aug 8, 2021
08/21
by
Joshua F (awssa)
data
eye 0
favorite 0
comment 0
This is a replacement for the standard LCD screen to add a BTT TFT35 v3.0 ( not for TFT35 E3 v3.0) the Electronics enclosure (SKR 1.4 + Mean Well LRS-350-24 + mosfet). SD card slot and USB slot are both usable. Printed at 0.16 with 5 perimeters, and 5 top and bottom layers, 20 percent infill.
Topics: enclosure, TFT35, thingiverse, BIGTREETECH_TFT35, TFT_Screen, 3D Printing, bigtreetech_tft35_v3,...
0
0.0
Aug 8, 2021
08/21
by
Tomas Zeman (tzeman)
data
eye 0
favorite 0
comment 0
# Case for BigTreeTech SKR Mini E3 v1.2 Case of minimal reliable size. I was missing such compact one. step/f3d are attached, so you can make modification on your own or if you cannot just ask me. ### BOM * **fan:** 4x SHSC/BHSC 12mm-16mm * **lid:** 4x SHSC/BHSC 6mm * **heat insers:** M3 x D 5.0mm x L 4.0mm (voron standard :-) * **board:** 5x SHSC 6mm ## Version 1.0 (current) - feature list * Board cooling fan mount (4010,4020...) * Inner cable attachment * Precise board spacer holes and SD...
Topics: bigtreetech_skr, CR10, enclosure, skr_mini_e3, thingiverse, Creality_CR-10, Ender_3, case,...
1
1.0
Apr 24, 2021
04/21
by
Anthony Weidner (Antwon_Fukwon)
data
eye 1
favorite 0
comment 0
This box is designed to be used in conjunction with the box i made to house the HRP-600-24. This box mounts on top of that one using mounts in the power supply. Access holes allow wires to be fed directly to the screw terminals. This box uses the power input, switch, switch board, and wire grommet that came with your Ender 5+. Mounts have been set up for the BTT SKR 1.4 Turbo board and the TFT35 3.0 screen. The fan duct is designed to fit over the board with 2208 uart with heat syncs and uses...
Topics: tft, 3D Printing, bigtreetech_skr, fan_duct, BTT_SKR_14, tft35, turbo, stl, 2208, thingiverse, skr,...
0
0.0
Aug 8, 2021
08/21
by
Tomas Zeman (tzeman)
data
eye 0
favorite 0
comment 0
Compact SKR Mini E3 v2 Case with removable wall to make installation easier. I made lot of additional small improvements to previous version for E3 v1.2 you can find here https://www.thingiverse.com/thing:4920905 .step/.f3z are attached so feel free to make any modification you need. If you cannot I will try help you with it. Any feedback is appreciated. ## BOM BOM fan: 4010+ fan screws: 4x SHSC/BHSC 14mm-16mm lid: 4x SHSC/BHSC 6mm heat insers: M3 x D 5.0mm x L 4.0mm (voron standard :-) board:...
Topics: bigtreetech_skr, thingiverse, 3D Printer Parts, bigtreetech, case, skr_mini_e3_case, Creality,...
0
0.0
Jun 10, 2021
06/21
by
Free Monster (freexmonster)
data
eye 0
favorite 0
comment 0
The project was developed in open source. 3d model created in the program Blender v2.82.7.
Topics: 3D Printer Accessories, skr_14, bigtreetech_skr, thingiverse, my3d, skr_13, Mainboard, stl
0
0.0
Jul 22, 2021
07/21
by
Manuel Braun (krachkind)
data
eye 0
favorite 0
comment 0
An Electronic Box for Ender 3 (Pro / V2) in the style of the Ender3 V2 box but different. Double size in height and both sides left and right for a better cooling and a good accessible Board (SKR Pro only added by now) and the Raspberry Pi.
Topics: BTT_SKR_Pro, Raspberry_Pi, stl, Parts, bigtreetech_skr, thingiverse, Ender3v2, creality_ender_3
0
0.0
Aug 22, 2021
08/21
by
Wellington Macedo (wmacedo)
data
eye 0
favorite 0
comment 0
BigTreeTech TFT70 v3.0 case v2 This version was remixed to integrate a set of changes I'm making in my Ender-3. - Electronics moved to the backside (skr 1.4 turbo upgrade + raspberry pi) - Rubber foots to elevate and eliminate the vibration - PSU hidden on the frontside space within a case - Bigger display on the front
Topics: bigtreetech, bigtreetech_tft70, btt_tft70, case, stl, thingiverse, 3D Printer Parts, tft70
0
0.0
Jul 22, 2021
07/21
by
Alvin Esnen (AlvinLE)
data
eye 0
favorite 0
comment 0
This bracket will fit into the stock electronics box for the CR-10 V2/V3 where you can install a BigTreeTech SKR 2 mainboard. Secure the bracket onto the stock mainboard standoffs with a bit of double-sided tape and attach the SKR 2 board with the stock M3 button-head screws.
Topics: cr10v3, cr10v2, stl, 3D Printer Parts, bigtreetech_skr, SKR2, thingiverse
0
0.0
Mar 22, 2021
03/21
by
Theo Gruner (omegalax)
data
eye 0
favorite 0
comment 0
Box for skr 1.4 (turbo) with 40mm fan.
Topics: stl, 3D Printer Parts, 3030_extrusion, SKR, 3D_printer_3030, skr_14, thingiverse, bigtreetech_skr
0
0.0
Jan 6, 2021
01/21
by
Massimiliano Mandato (TheMaxx2804)
data
eye 0
favorite 0
comment 0
This is a case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate. In this Version i wanted to integrate a bigtreetech skr1.3 board and also a dc converter as you can see on the photos. The holes are ready for gx16 connectors and there are also slots for the usb, sd card and wifi adapter of the skr board. If you do not need all of the gx16 holes then you can use the cover which i added to the print files. On the cover...
Topics: bigtreetech, bigtreetech_skr, bigtreetech_skr_pro, stl, LowRider_CNC, Lowrider, MPCNC_Add-On, cnc,...
0
0.0
May 1, 2021
05/21
by
Luk Ki (lukki15)
data
eye 0
favorite 0
comment 0
This is a remix of Teaching Tech's adapter and timmeyb internal adapter. Both adapters did not fit my needs. I had the same problem as timmeyb, that the power supply was too long, additionally I wanted to keep the fan inside the electronics enclosure, next to the heatsinks. I kept the overall design of the adapter, what I changed is that I remade everything in OpenSCAD and moved the mounting of the board itself further back. Everyone can modify the offset by them self inside the .scad file, to...
Topics: stl, bigtreetech, Ender5, skr_13, 3D Printer Accessories, skr_14, thingiverse, bigtreetech_skr
0
0.0
Jul 22, 2021
07/21
by
Nicolas Wright (Flyingwright)
data
eye 0
favorite 0
comment 0
Remixed Drawer mount. The original had a usb dongle holder and extender from the main board. I didn't want any of that so I removed them. I also noticed the guides for the drawer on top print a few layers above the front so I brought those down, to level so the skirt goes all the way around the print. Not sure why they were put just above the surface I may learn that I made a mistake when I install it on my lack enclosure. I also put some text on the front for style points. its a cool design...
Topics: TFT35, Ender_3_Pro, stl, BIGTREETECH_TFT35, 3D Printer Parts, Ender_3, thingiverse
0
0.0
Jan 6, 2021
01/21
by
Luke Harrison (looxonline)
data
eye 0
favorite 0
comment 0
Feeling disappointed that you never got a yellow duckie? You are into 3D printing you know... Why not just make one???
Topics: bigtreetech, 3D Printing, stl, duckie, duck, thingiverse
0
0.0
Jan 4, 2021
01/21
by
Laszlo Boda (claidheamohmor)
data
eye 0
favorite 0
comment 0
I bought a Bigtreetech Smart Filament Sensor v1.0, and tried some clever console, but they doesn't fits well enough (because I using a heatsink for the x stepper the vertical solutions not usable), so I made my own. The starting point was Daniel Stoelzner's amazing remixed cable holder https://www.thingiverse.com/thing:3244262
Topics: bigtreetech, Smart_filament_sensor, stl, Filament_Sensor, thingiverse, cable_holder, BTT,...
0
0.0
Jan 6, 2021
01/21
by
Rafael Silva (Silvr21)
data
eye 0
favorite 0
comment 0
Wasn't sure how I wanted to "Pimp out" my QR Code Area. I'm not into Video games or Starwars enough to put it on the front of my printer....and I hate the Ender Dragon on everythingy thing made. Well the other day I put my BigTreeTech Rubber ducky up there and the idea came to me! RUBBER DUCKY DUCK HUNT SHOOTING RANGE! There are 6 Versions! Each more intricate than the previous. I kept getting more ideas so I just kept designing. So pick which Ducky Range you want! The ones pictured...
Topics: bigtreetech, QR code cover, stl, QR_code, QR Cover, duck, thingiverse, 3D Printer Accessories, Ducky
0
0.0
May 1, 2021
05/21
by
Alex Poth (ale624)
data
eye 0
favorite 0
comment 0
Made these two things as i grew tired of the issues i was having with my Robin Nano. Running Klipper on this setup now, so no screen required!
Topics: stl, SKR, flsun_q5, skr_13, 3D Printer Parts, flsun, thingiverse, bigtreetech_skr
0
0.0
Mar 19, 2021
03/21
by
Phillip Skoric (Philsko)
data
eye 0
favorite 0
comment 0
This adapter plate is designed to mount a skr 1.3 controller board to the original mounting location of a trigorilla controller board and to maintain the original position as good as possible. The adpater board is designed for the Anycubic 4max (nonpro), but should work wherever a trigorilla board was mounted, but I can't guarantee this. The plate makes it possible to mount a skr 1.3 board in a 4max so that as little cable as possible has to be changed. Some connections on skr 1.3 are different...
Topics: bigtreetech_skr, skr V1.3, skr_13, thingiverse, trigorilla, skr, Anycubic, 4max, 3D Printer Parts,...
0
0.0
Jan 6, 2021
01/21
by
Lex Luthor (Lex178)
data
eye 0
favorite 0
comment 0
This model is an adapter from the place under the Anet 1.0 Board to the SKR board For build i use 4 screws M2*10 and 16 screws M3*20 Used fan 50*50*15 I advise you to print from plastics with good interlayer adhesion. I used PETG Sources are attached. Modeled in Autodesk Inventor.
Topics: bigtreetech, anet_a6, stl, SKR, 3D Printer Parts, anet, skr_14, thingiverse, skr_13
0
0.0
May 1, 2021
05/21
by
Michael D. (MakeyCat3D)
data
eye 0
favorite 0
comment 0
I upgraded my E5 Plus to a SKR Mini E3 V2.0 and the Bigtreetech TFT V3.0. I printed this: https://www.thingiverse.com/thing:4421077, but the screw holes of the PCB didn't align, so I remixed it with M3 threaded holes, shifted 1mm from the place where they used to be. Just tap the thread afterwards with a M3 and you're good to go! Print with support, front facing down
Topics: stl, crealityender5plus, TFT35, ender5plus, 3D Printer Accessories, thingiverse, BIGTREETECH_TFT35
0
0.0
May 1, 2021
05/21
by
David Kobey (davidkobey)
data
eye 0
favorite 0
comment 0
Yet another set of standoffs. I made this version because I did not have a right-angle USB-B cable and I did not want to drill in the case. This moves the board flush with the heater control MOSFET and leaves margin on the side for USB cable. Requires - the 4 original screws + 4 M4 screws.
Topics: stl, Ender_5_plus, 3D Printer Accessories, thingiverse, bigtreetech_skr
0
0.0
Jan 6, 2021
01/21
by
Keith Pochter (kpoch)
data
eye 0
favorite 0
comment 0
A slight remix of 3d_by_EB's mount. Made the counterbore for the cap head screws larger. You will need a few different length M3 SHCS. Please remember to adjust your Z-offset. You will also need to modify the Bang_Max in your firmware. I ended up using 175-200 for bang_max.
Topics: bigtreetech, geeetech, stl, 3D Printer Parts, thingiverse, XCR3D, A10M
0
0.0
Jul 22, 2021
07/21
by
Doug Wolfe (WolfeScience1)
data
eye 0
favorite 0
comment 0
This remix was designed to have a 5015 (50mm x 15 mm) blower fan installed to cool drivers. The mounts were made in the v2 version to only partially extend along the length of the case, so that it would fit on my printer, which does not have 40mm v-slot running the entire length of the z-axis. STLs are of the V2 version. Nut holes on base do NOT require any support. All parts can be printed withOUT support, but they are not oriented correctly in the files. Install the BTT SKR 2 before the reset...
Topics: bear, SKR, 5015_blower, prusa, stl, 3D Printer Parts, 5015, bigtreetech_skr, thingiverse
1
1.0
Apr 27, 2021
04/21
by
(madlex)
data
eye 1
favorite 0
comment 0
About *** My recently build Hypercube uses the BGT TFT V2.0 and as I couldn't find a suitable case for it, I designed one from scratch. If uses brass inserts to hide metal screws and connects to a 30x30 mm aluminum profile while also keeping an adjustable view angle. You can mount it on vertical or horizontal profiles without changing any of the parts. If you want to connect it to 20x20 or 20x40 aluminum profiles. I've attached the Fusion 360 CAD archive of all parts to modify it as you see...
Topics: bigtreetech_tft35, thingiverse, case, HyperCube_Printer, hypercube, tft35, bigtreetech_tft,...
1
1.0
Jan 6, 2021
01/21
by
Piotr Szala (szalap)
data
eye 1
favorite 0
comment 0
It is a remix of Screen Holder for TFT 35 V2.0 by mjcopper. I have fitted it for Formaker 4in1 printer.
Topics: bigtreetech, stl, CTC, 3D Printer Parts, Formaker_4-in-1, thingiverse, bigtreetech_tft35_v2
0
0.0
Jan 6, 2021
01/21
by
Rafael Silva (Silvr21)
data
eye 0
favorite 0
comment 0
Wasn't sure how I wanted to "Pimp out" my QR Code Area. I'm not into Video games or Starwars enough to put it on the front of my printer....and I hate the Ender Dragon on everythingy thing made. Well the other day I put my BigTreeTech Rubber ducky up there and the idea came to me! RUBBER DUCKY DUCK HUNT SHOOTING RANGE! There are 6 Versions! Each more intricate than the previous. I kept getting more ideas so I just kept designing. So pick which Ducky Range you want! The ones pictured...
Topics: bigtreetech, QR code cover, stl, QR_code, qrcode, thingiverse, QR cover, Ender_3_Pro, 3D Printer...
0
0.0
Jun 10, 2021
06/21
by
Ruben Martins (RubenMartins)
data
eye 0
favorite 0
comment 0
Enclosure for anet 24v power supply and bigtreetech Relay, Ups, Mosfet and ES8266 with relay to remote power up.
Topics: Prusa, 3D Printer Parts, bigtreetech, thingiverse, Anet_A8, stl
0
0.0
Mar 22, 2021
03/21
by
Kevin Karan (kevinkaran)
data
eye 0
favorite 0
comment 0
Super simple SKR 1.4 mount (should fit earlier version too) to mount to a 2020 extrusion. It is totally symmetrical so you can mount it any way you want. The hat part clips on. The fan mount is sized to fit a 60x10mm fan. The holes in the base are sized to fit 2.5mm standoffs.
Topics: stl, bigtreetech, 3D Printer Parts, SKR, thingiverse, bigtreetech_skr
0
0.0
Mar 16, 2021
03/21
by
cross print8 (cross_p8)
data
eye 0
favorite 0
comment 0
+++This is WiP and not entirely perfect!+++ Also keep in mind that you need a printer with a huge printsurface as this case was not designed to be split in half. ++Complete new case for the electronics on my Sunlu S8++ It fits nicely under the printer and attaches to the metal extrusions with some screws. You also have to remove the old front case and print new foots for the front. Then the old rubber feet can be screwed in. The clamp is to hold the end of the power supply when erverything else...
Topics: bigtreetech_skr, thingiverse, Sunlu_S8, skr_mini_e3, raspberry_pi_case, 3D Printer Parts, stl, case
0
0.0
Jan 6, 2021
01/21
by
Attila Kovacs (csatti)
data
eye 0
favorite 0
comment 0
This is a Wanhao Duplicator 4 compatible mount for a Bigtreetech TFT35 E3 screen. The excellent case design compatible with this mount is made by algenist (https://www.thingiverse.com/thing:4436428).
Topics: replicator_upgrade, stl, Wanhao_Duplicator, 3D Printer Parts, Wanhao_Duplicator_4X, screen_mount,...
0
0.0
Jan 5, 2021
01/21
by
Juan Moreno (uncholowapo)
data
eye 0
favorite 0
comment 0
I made this simple case to fit my SKR 1.3 to the Tevo Tarantula. Its got holes for the bed and extruder cables as well as a mount for a 40mm fan. Goes on the frame. No supports needed.
Topics: bigtreetech_skr, tevo_tarantula, stl, 3D Printer Parts, thingiverse, skr_13
1
1.0
Apr 24, 2021
04/21
by
Delphius Symington (Delphius_JD)
data
eye 1
favorite 0
comment 0
This is a compete redesign of the original thing. The source file is included and is incompletely parametric. This means that things like the LCD panel angle and case length is adjustable simply by changing a single variable. The side panels are split into two pieces to make it possible to print on smaller printers. Use a soldering iron to insert M3 brass inserts into all the larger holes. If you want to thread the screws directly into the plastic, download the source file and change the brass...
Topics: skr 1.3, 3D Printing, bigtreetech_skr, mean well, skr 1.4, stl, enclosure, thingiverse,...
0
0.0
May 1, 2021
05/21
by
Kirk Evans (1CM69)
data
eye 0
favorite 0
comment 0
A slight remix of: https://www.thingiverse.com/thing:4221768 This is firstly a mirrored part to mount the screen on the right hand side. Having done this for my own purposes I found that the bracket was a little insecure with just the single fixing point on each face so I added a second. I kept the model as original without needing supports to print. 0.2mm LH. Have included the FreeCAD file, (excuse the mess, I am no professional), incase anyone wishes to alter this model.
Topics: stl, bigtreetech, TFT35, bigtreetech_tft35_v3, 3D Printer Parts, thingiverse, BIGTREETECH_TFT35
0
0.0
May 1, 2021
05/21
by
jakub ja (ustejski)
data
eye 0
favorite 0
comment 0
I wanted some case for new skr 1.4 turbo that will look as Průšas case, so i made one, it is based on step files from internet, it is made for 2040 AL t-slot profiles, but it will work with 4040, and maybe with v-slot profiles, didn't tried. You can follow Průšas assembly instructions for this one too, except few nuts and screws, but in mirror manner. I have mirrored the case for better acces. It is not suitable for skr board with wifi module, but with few cables it can be connected anyway....
Topics: stl, bear, Bear_Upgrade, prusa, prusa_i3_bear_upgrade, Skr, BTT_SKR_14, turbo, 3D Printer Parts,...
0
0.0
Jul 22, 2021
07/21
by
Chris Riley (brotherchris)
data
eye 0
favorite 0
comment 0
This is a great project, I just remixed it a bit for the switch and hardware I used. Switch https://www.amazon.com/gp/product/B07BD2D96W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Topics: relay, 3D Printer Accessories, thingiverse, btt, stl, psu, bigtreetech
0
0.0
Apr 24, 2021
04/21
by
francy pink (stampa3dreality)
data
eye 0
favorite 0
comment 0
Compilazione del firmware Marlin con sottotitoli inglesi per Skr E3 mini 2.0 https://youtu.be/7A4ifAUm4z8
Topics: SKR, 3D_Printer_Firmware, MarlinFW, skr_mini_e3, 3D Printers, bigtreetech_skr, 2.0, stl,...
0
0.0
Jul 22, 2021
07/21
by
Telllo Garrote (Tellooop)
data
eye 0
favorite 0
comment 0
Carcasa original adaptada a la placa BTT SKR_V1.4 //////////////////////////////////////////////////////////////////////////////////// Original enclosure adapted to BTT SKR_V1.4 motherboard
Topics: 3D Printer Accessories, anycubic_mega_zero, stl, skr_14, Bigtreetech_SKR_v14, bigtreetech_skr,...
0
0.0
May 1, 2021
05/21
by
Bruno Fonseca (Bfonseca)
data
eye 0
favorite 0
comment 0
I've made this 3010 cooling Fan Holder for my JGaurora A5. The fan support bracket slides on the SKR spacer.
Topics: stl, Adjustable, Adjustable_cooling, jgaurora, 3D Printer Parts, JGAurora_A5, skr_14, thingiverse,...
0
0.0
Mar 22, 2021
03/21
by
Dimitrij Goldshteyn (dgo)
data
eye 0
favorite 0
comment 0
I was inspired by hotend holder https://www.thingiverse.com/thing:1703064 But 30x30 fan are weak and can't really cool down the hotend. Moreover the bronze bearing was abused after 10-15 days and I've twice melted holder :( Then I suggested to develop my own holder for the BIGTREETECH 3in1 bowden hotend. I've already tested this design with E3D Hotend and this is the 3in1 version. The holder has exhaust of hot air from hotend to the top, and doesn't cool down filament if this is don't wanted....
Topics: holder, stl, hotend, 3in1, 3D Printer Parts, bowden_hotend, thingiverse, BIGTREETECH
0
0.0
Jan 5, 2021
01/21
by
Bryan Avery (bavery79)
data
eye 0
favorite 0
comment 0
Remixed mounting arm for 3Deddy's "Slim and Elegant BTT TFT35 V3" mount to relocate the screen to the front of the printer. Mount attaches to the front/underside of the 2020 frame using 5mm T-nuts. Print the ball mount and the rest of the screen case from 3Deddy's design here: https://www.thingiverse.com/thing:4246505
Topics: btt_tft35, stl, BIGTREETECH_TFT35, thingiverse, bigtreetech_tft35_v3, TFT35, 3D Printer Accessories
1
1.0
Mar 9, 2021
03/21
by
Maxim Netyaga (desmond7775)
data
eye 1
favorite 0
comment 0
Airflow for TMC drivers for Anycubic Kossel with skr 1.3 board and fan 40x40x10
Topics: MKS_Gen_L, fan, 40x40, stl, thingiverse, Anycubic_Kossel, bigtreetech_skr, kossel, TMC2208, driver,...
1
1.0
Mar 10, 2021
03/21
by
jason (jass_on)
data
eye 1
favorite 0
comment 0
Bracket with integrated 40mm cooling fan directed over steppers. MKS Gen L and SKR 1.3 both fit.
Topics: 2020, MKS_Gen_L, 3d_printer, voronoi_design, stl, thingiverse, 3D Printing, 3D_printing,...
1
1.0
Mar 22, 2021
03/21
by
Paweł Kucmus (mcabra)
data
eye 1
favorite 0
comment 0
# 2020 Case for an MKS GEN L > And probably SKR 1.3 (as it has almost the same dimensions) Please consider TIPing me if you like this or my [other designs](http://www.thingiverse.com/mcabra/designs) - It'll help me make more stuff and get some money back from filament used for prototypes :) ## Problem: I needed a case for a [Hypercube](https://www.thingiverse.com/thing:1752766) I was making for a friend that would contain the MKS Gen L he provided for the build. ## Requirements: 1. It should...
Topics: 2020, stl, case, MKS, 3D Printer Parts, thingiverse, bigtreetech_skr
