2
2.0
Apr 20, 2022
04/22
by
Filip Dodek (F-Print)
data
eye 2
favorite 0
comment 0
Mounts for bigtreetech SKR 1.4 Turbo+Mosfet and BTT12864 mini display. This may require extension cables for display, extension for sd card, and for USB plug because original mounts don't let me, place board, to original windows for card and USB. The bottom part for display is designed to screw bolts directly to plastic and mount for board and MOSFET requires M3 thread inserts. This may be suitable for the Fystec display too. !! this printer required changes of cable management to use this...
Topics: 3D Printer Parts, thingiverse, anet, bigtreetech, bigtreetech_skr, stl
3
3.0
Jun 21, 2021
06/21
by
Udo Grohmann (darwin-de)
data
eye 3
favorite 0
comment 0
This box is designed for the SKR mini V1.1 and a Heatbed FET module. There are now two versions, **Version 1:** (old) The upper housing part snaps on the baseplate. The deflector (above) has to glued on. Mount the electronic boards with M3 screws, the base is designed to grab the screws. Optionally, you can use curled inserting nuts M3x5x5. **Version 2:** The walls are slightly thinner and the Fan build into the case, the case is screwed on and the deflector snaps in. Between the boards are two...
Topics: SKR, thingiverse, 3D Printer Accessories, stl, bigtreetech, bigtreetech_skr
3
3.0
Mar 25, 2021
03/21
by
Armin Thinnes (Arminth)
data
eye 3
favorite 0
comment 0
This is a remix of @pedroamz great design for the bigtreetech 2.4" TFT touchscreen https://www.thingiverse.com/thing:3827565. Bigtreetech have changed their hardwaredesign since pedroamz has created his case and some things have been moved like resetbutton, displayposition, connectorpositions and others. I have created an OpenSCAD program which takes care of all the differences. It also enlarges the opening for the USB-stick a smidge. If you don't like the logos, you can hide them...
Topics: stl, thingiverse, bigtreetech, 3D Printer Parts, bigtreetech_tft24, displaycase
3
3.0
Apr 1, 2021
04/21
by
Patrick Cruse (Portzal)
data
eye 3
favorite 0
comment 0
Modular screen case for the Bigtreetech TFT70 V3.0. You will need 4 x M3 x 5mm bolts to attach the screen to the printed case. the bolt holes may need to be cleared with a 2.5mm drill bit and the threads started with a M3 tap to ease installation of the bolts. be careful not to drill through the face of the case. 4 x 8mm diameter rubber bumps for the base of stand if required. (To stop it sliding on smooth surfaces.) The two parts clip together via hidden locating pins. The reset guard will...
Topics: 3D Printing, thingiverse, bigtreetech, bigtreetech tft70, btt_tft70, stl
3
3.0
Jan 7, 2021
01/21
by
Micah Reichman (Tinker_Dad)
data
eye 3
favorite 0
comment 0
This is firmware for a BigTree-Tech Biqu B1 3D printer. I have enabled Mesh bed leveling 3 points if you have a warped bed. Mesh Bed leveling reference: https://www.youtube.com/watch?v=vcxM7-VK44k&ab_channel=TeachingTech To flash this to your Biqu B1 follow these instructions. 1. Download firmware.bin 2. Place the firmware.bin file on the root of a microSD. 3. Insert the MicroSD into the rear SD port near the USB connection port. 4. Power on the printer. 5. Done now the printer has been...
Topics: bigtreetech, bigtreetech_skr, marlin_firmware, stl, 3D Printers, bigtreetech_biqu, thingiverse,...
0
0.0
Aug 15, 2022
08/22
by
Trevor Reintjes (Trev1ak)
data
eye 0
favorite 0
comment 0
This is my design for Big Tree TechTFT70 screen housing and mount for my VzBot330/235 I personally don't like notching the bottom of the doors so designed this to get around that. mounting can be used for other BTT TFT displays as well
Topics: 3D Printer Accessories, tft70, BTT, stl, bigtreetech, vzbot, bigtreetech_tft70, thingiverse
3
3.0
Jan 8, 2021
01/21
by
ThePrimo Nemo (ThePrimoNemo)
data
eye 3
favorite 0
comment 0
Designed to be used and printed for I3s using BTT However you can print whatever section you need and remix accordingly with removable panels. Bolt size M3 x10-15mm QT: 40 Enjoy!
Topics: bigtreetech_skr, stl, 3D Printer Parts, Big Tree Tech, Wanhao, Wanhao_Duplicator_I3,...
3
3.0
Mar 12, 2021
03/21
by
P W (WwonderLlama)
data
eye 3
favorite 0
comment 0
I replaced the motherboard on my MP Maker Select Plus after it died.I replaced it with the BIGTREETECH SKR 1.4 Turbo + TFT35 LCD package. This provided some challenges, including mounting both items to the printer. For the mainboard, I used https://www.thingiverse.com/make:822842 . But, I couldn't find a suitable LCD mount. I liked the build of the Remix source and modified it for my needs. This version clips to the top of the LCD cutout on the MPMSP, has 2 alignment pegs and a bottom support...
Topics: Touchscreen, 3D Printer Parts, thingiverse, lcd_case, monoprice_maker_plus, BIGTREETECH_TFT35, lcd,...
1
1.0
Apr 19, 2022
04/22
by
Daniel Daniel (GoFlowDan)
data
eye 1
favorite 0
comment 0
Gehäuse für Bigtreetech TFT50 Kann auch ohne Reset Taster Gehäuse benutzt werden Füße für 20x20 Aluprofil 8x Zylinderkopf M3x8mm 2x Zylinderkopf m4x10mm 2x Unterlegscheiben M4 8x Unterlegscheiben M3 +2x M3 für Reset Case 12x Gewindeeinsatz M3x (dia) 4.6 x 5.8 (h) !!Fuss Spiegeln!! Schmaler USB-Stick 12.2mm x 4.6mm (Kingston) Falls ihr einen größeren Stick verwenden wollt Anschreiben
Topics: tft50, thingiverse, Tronxy 400, 3D Printing, x5sa, bigtreetech_tft50, bigtreetech_tft 50, stl,...
4
4.0
Jan 16, 2021
01/21
by
Javier Garcia (andale9700)
data
eye 4
favorite 0
comment 0
I wanted a custom case to house my SKR v1.4 board and TFT35 V3 touchscreen on my Lowrider V2. This setup allows for placement on the Y-plate with the option of fans to cool the motor drivers and easy access to all of the cables.
Topics: Lowrider, BIGTREETECH_TFT35, thingiverse, bigtreetech_skr, Lowrider2, cnc, Other, stl
4
4.0
Mar 13, 2021
03/21
by
darren morton (Darrenm)
data
eye 4
favorite 0
comment 0
This is my first remix so i hope you like it all i did was make the screen bigger and put some cut outs for the various cables
Topics: 3D Printer Accessories, thingiverse, BIGTREETECH_TFT35, stl, bigtreetech_tft35_v3
3
3.0
Jan 13, 2021
01/21
by
Michael Jeffers (JunkYardDawg)
data
eye 3
favorite 0
comment 0
I designed this a few months ago, originally for my niece's CR10 Mini, but then I later added some more features for me to use with my Tevo Tarantula, but this has ports for aviation connectors, as well as the mosfet footprint for the Creality printers. There's an IEC port for mains voltage entry, a wind tunnel for the drivers, bolt-on fan mounts for the tunnel, a fan mount for the mosfet, exit vents, bolt-on reset button trigger, extra space for the mess of wires, and a lid with a fan port on...
Topics: thingiverse, stl, 3D Printer Accessories, openscad, BIGTREETECH_TFT35, bigtreetech_skr
3
3.0
Apr 4, 2021
04/21
by
hoshea rittenhouse (AlmightyFireFly)
data
eye 3
favorite 0
comment 0
I like the original by scedux, but want a couple changes for mounting and viewing angle. Then I cleaned up the model and made it easier to print. Turned out great!
Topics: thingiverse, 3D Printer Parts, 2020, bigtreetech, stl, bigtreetech_tft24, tft24
5
5.0
Mar 15, 2021
03/21
by
Peter Savas (jrpinter)
data
eye 5
favorite 0
comment 0
This is a remix of the incredible BigTreeTech TFT70, TFT35, SKR, Raspberry Pi Case by max_davis (Thing ID 4568324) that I have adapted to my own setup. The case includes space for an SKR 1.4Turbo, a Raspberry Pi with a buck converter for the Pi, and a Meanwell power supply to be mounted internal to the case. Putting the power supply inside required me to widen the case a bit, which was a good thing because I needed the room for two screens on the front. The front faceplate has been modified to...
Topics: bigtreetech_skr, PiTFT50, thingiverse, BIGTREETECH_PITFT50, SKR, skr_14, BIGTREETECH_TFT35,...
3
3.0
Jan 4, 2021
01/21
by
Bryan Avery (bavery79)
data
eye 3
favorite 0
comment 0
Remix of HeyRay2's CR-10 control box eliminator, reworked to fit the slightly larger Geeetech A30 frame. Fixed some mesh issues with the vents, moved some holes around and expanded so that the entire finished box matches the correct dimensions for the Geeetech A30. This was a complete rebuild of my Geeetech A30 that included a new Bigtreetech SKR 1.4 Turbo main board and TFT35 v3.0 screen, Raspberry Pi 4, new Meanwell power supply & a new mosfet for the heated bed. I did make some...
Topics: a30, bigtreetech_skr, btt_tft35, stl, skr_14_turbo, TFT_35_mount, 3D Printer Parts,...
3
3.0
Jan 7, 2021
01/21
by
Arcmal Kamaruzaman (arcmal_22)
data
eye 3
favorite 0
comment 0
My Design to mount the Bigtreetech TFT35 E3 V3.0 to CR-10/CR-10S...Please download & enjoy.... -Arcmal-
Topics: Creality_CR-10s, BigTreeTech_TFT35_E3, stl, 3D Printer Parts, BIGTREETECH_TFT35, thingiverse,...
5
5.0
Mar 9, 2021
03/21
by
Markus (Speedy_67)
data
eye 5
favorite 0
comment 0
A mount for the SKR mini V1.1 Additional parts: 4 screws M3x8 mountingbrackets for the SKR mini E3 V1.2 can be found here: https://www.thingiverse.com/thing:4240817
Topics: bigtreetech, stl, thingiverse, 3D Printer Accessories, bigtreetech_skr, skr mini
3
3.0
Apr 5, 2021
04/21
by
Rob Riggs (mobilinkd)
data
eye 3
favorite 0
comment 0
This is a mounting bracket for the FlashForge Creator X used for the Big Tree Tech (BTT) TFT35 V3. This is designed to fit into the display hole on the front panel, sandwiching the panel between the two parts. This is designed to be used with the [Slim and Elegant BTT TFT35 V3 Touch Screen](https://www.thingiverse.com/thing:4246505) by [3Deddy](https://www.thingiverse.com/3Deddy). The FreeCAD files are hosted on [GitHub](https://github.com/mobilinkd/ffcx-tft35-v3-mount)
Topics: thingiverse, 3D Printer Accessories, stl, BIGTREETECH_TFT35, bigtreetech_tft35_v3
4
4.0
May 1, 2021
05/21
by
Salvatore Patti (stampa3dreality)
data
eye 4
favorite 0
comment 0
Logo della bigtreetech da incollare pezzo per pezzo . Ecco il risultato https://www.instagram.com/p/CIbkDs-qcjY/?igshid=yl5x71vus72v Nel caso vuoi migliorarti nella stampa 3d seguimi nei social ! Canale Youtube https://www.youtube.com/c/STAMPA3DREALITY Abbonamento patreon per i miei corsi https://www.patreon.com/salvatorepatti Gruppo Facebook per assistenza sulla stampa 3d https://www.facebook.com/groups/2535901350002066/ Gruppo Telegram per tutte le offerte di Amazon nella stampa 3d...
Topics: stl, bigtreetech, 3D Printer Parts, brand, thingiverse, logo, bigtreetech_skr
4
4.0
Jun 7, 2021
06/21
by
Whitecastle Crachat (Whitecastle)
data
eye 4
favorite 0
comment 0
The blue light of Bigtreetech Cloud v1.0 device was 2 strong for my eyes aand i decided to enclosure the device to cover it while still access to all functions. This was designed for the version with micro SDCARD but i think it can be used for the other version. This was also designed for BIGTREETECH TFT35 and SKR MINI V2.0 ( I think it works also for 1.2, 1.3 ,1.4 ). So if you think it can be improved let me know... **** WARNING **** THIS IS SOME WHAT TIGHT SO IF YOU'R PLANING TO REMOVE THE...
Topics: thingiverse, case, stl, 3D Printer Accessories, BIGTREETECH_TFT35, bigtreetech_skr
4
4.0
Jun 6, 2021
06/21
by
Noah Magadia (Roronoah)
data
eye 4
favorite 0
comment 0
Just made this very simple skr 1.3 mount that I will use on my BLV MGN 3D Printer. 2nd and 3rd version just have fan mounts on the side (if there will be vibration, just in case lol) Fan size is 50mm I chose 50mm as its more quiet than the 30-40mm for me.
Topics: skr_13, SKR, thingiverse, stl, 3D Printer Accessories, bigtreetech, bigtreetech_skr
2
2.0
Nov 30, 2021
11/21
by
Rick Ren (blstexas)
data
eye 2
favorite 0
comment 0
Case for BTT SKR2 remixed from SKR 1.4 case
Topics: bigtreetech_skr, BTT, thingiverse, bigtreetech, stl, SKR, 3D Printer Parts, SKR2
4
4.0
Jan 7, 2021
01/21
by
Christian Matthews (christianUK)
data
eye 4
favorite 0
comment 0
This is a design for a simple enclosure for the BigTreeTech TFT24 (v1.1) and a mount which is compatible with the existing TFT cutout on the FLSun Q5. Why? - I have replaced the MKS Robin Nano board which is standard on the Q5 with an SKR 1.4 Turbo. I did this because: 1. The stock Q5 firmware isn't very well optimised (to say the least). 2. Building Marlin for the MKS Robin Nano was causing me headaches. 3. Achieving UART control for the TMC220x drivers on the Robin Nano seemed to be a bit of...
Topics: bigtreetech_skr, bigtreetech_tft24, stl, 3D Printer Parts, thingiverse, flsun_q5
4
4.0
Mar 18, 2021
03/21
by
Markus (Speedy_67)
data
eye 4
favorite 0
comment 0
a housing for bigtreetech´s TFT28 angled 30° for better view additional parts required: 4 pcs M3x18 countersunk
Topics: bigtreetech tft28, TFT28, bigtreetech, 3D Printer Accessories, thingiverse, BTT TFT28, stl
3
3.0
Mar 25, 2021
03/21
by
Chris Moldenauer (MoldyHacker)
data
eye 3
favorite 0
comment 0
I needed a case for this TFT so i could use it with my ender 3 and I couldn't find one so i took a crack at it. in hindsight there are a few things I would have changed. But, this is a work in progress,
Topics: stl, thingiverse, bigtreetech_tft35_v3, TFT35, BIGTREE, bigtreetech, BIGTREETECH_TFT35, 3D Printer...
3
3.0
Jan 5, 2021
01/21
by
Mladen Tomsic (bob1391)
data
eye 3
favorite 0
comment 0
Case for BigTreeTech TFT35 E3 V3.
Topics: bigtreetech, btt_tft35, stl, lcd_box, tft35, lcd35, tft_box, BIGTREETECH_TFT35,...
4
4.0
Apr 1, 2021
04/21
by
Andrew Babich (andrewbabich)
data
eye 4
favorite 0
comment 0
Simple to print case for Bigtreetech TFT3.5 v3.0. In this design you have access just to EXP1, EXP2 and TFT connectors, and exactly to SD and USB - no supports needed - no rafts needed BOM: _______________________________________________________________ - M3mm x 8mm round cap - 4pts (screwing TFT to case) - M3mm x 8mm cone cap - 4pts (screwing rear part)
Topics: thingiverse, 3D Printer Accessories, btt_tft35, bigtreetech_tft35_v3, BIGTREETECH_TFT35, stl
1
1.0
Apr 20, 2022
04/22
by
Max Siebenschlaefer (threeD_Designer)
data
eye 1
favorite 0
comment 0
Only a small remix for T-Nut Extrusion
Topics: thingiverse, bigtreetech_tft70, TFT_Screen, tft, bigtreetech, 3D Printer Accessories, stl
4
4.0
Mar 31, 2021
03/21
by
proko x68 (prokoko)
data
eye 4
favorite 0
comment 0
BIGTREETECH SKR V1.4 80mm fan mount. Quiet cooling for board and stepper motor driver
Topics: bigtreetech_skr, cooler, thingiverse, bigtreetech, TMC, 3D Printer Parts, biqu, stl
3
3.0
Apr 4, 2021
04/21
by
Randall Berkeley (OmniMaker)
data
eye 3
favorite 0
comment 0
A case to hold the BIQU AKA BigtreeTech TFT 3.5" v3.0 LCD Screen. Has access to SD card, reset button, and a relief in the back cover for the LCD cables. Remix if you need different cables exiting the box. Print case front facing down, no supports. The rear cover has a notch to allow both the TFT serial cable and the EXP1 + EXP 2 cables to exit the back. The TFT 3.5 v3.0 was designed to give touch screen and LCD12864 emulation in one package, so don't forget to use all 3 cables to get the...
Topics: thingiverse, 3D Printer Parts, lcd_case, BIQU, TFT_Screen, bigtreetech, stl, TFT35,...
4
4.0
Mar 22, 2021
03/21
by
hochmuth maxime (Maxdarkdog)
data
eye 4
favorite 0
comment 0
__________ Please consider clicking the "I made one" button and sharing pictures of your print ^^ If you like my work give me a like, it means a lot to me. __________ For the fan: the bigger the better and quieter Designed to use computer screws
Topics: stl, electronics_enclosure, bigtreetech, 3D Printer Parts, MOSFET, thingiverse, bigtreetech_skr
4
4.0
Mar 15, 2021
03/21
by
Matthew Kazee (Ratheon)
data
eye 4
favorite 0
comment 0
A simple housing to hold both the BTT TFT50 and the BTT Pi TFT 50. Mounts to a 20mm Ball Mount or you can design your own. My Raspberry Pi is powered from a buck converter so I did not include cutouts for the Pi. I used the following hardware for USB port access and Pi cooling. You will need a handful of M3 screws, Length is up to you. https://www.amazon.com/gp/product/B06VWQN2CK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1...
Topics: Bigtreetech_PI_TFT_50, 3D Printing, thingiverse, bigtreetech_tft50, stl, TFT50
0
0.0
Aug 15, 2022
08/22
by
Trevor Reintjes (Trev1ak)
data
eye 0
favorite 0
comment 0
This is my design for BigTreeTech TFT70 mount for my VzBot 330/235 and this allows me to keep full size doors with no notch at the bottom of the doors.
Topics: 3D Printer Accessories, tft70, BTT, stl, bigtreetech, vzbot, bigtreetech_tft70, thingiverse
3
3.0
Apr 24, 2021
04/21
by
Tor Nichols (BustedChain)
data
eye 3
favorite 0
comment 0
First you will need SkullKill's SKR Mount, the fan duct (Note: I have a customized version of the fan duct that fits even better that I will upload soon, so check back here and I will link it), and the first fan mount. Yes his mount does work for the V1.4 and V1.4 Turbo SKR Boards: https://www.thingiverse.com/thing:3980507 I have tested this secondary fan mount bracket with the SKR V1.4 Turbo. I have not tested it with the V1.1 Pro or V1.3 boards. Some hand fitting may be required to provide...
Topics: CR10S_PRO, Fan_mount, stl, 24v, bigtreetech_SKR13, Noctua_Fan_40mm, 12v, 12V_24V,...
3
3.0
Apr 2, 2021
04/21
by
Alex Tsitlionok (terghalin)
data
eye 3
favorite 0
comment 0
UNI 2.3 BigTreeTech TFT 3.5 V3.0 Holder (UNI Mini compatible) Держатель экрана BigTreeTech TFT 3.5 V3.0 для принтера UNI 2.3 и UNI Mini
Topics: thingiverse, bigtreetech, uni3dru, 3D Printer Accessories, uni3d, uni, BIGTREETECH_TFT35, stl
3
3.0
Jan 18, 2021
01/21
by
Peter M. (BigFunkyMan)
data
eye 3
favorite 0
comment 0
Bigtreetech TFT43 3.0 Case with 45° Stand and Stand for Item Profile.
Topics: 3D Printer Parts, tft42_3.0, tft42, thingiverse, bigtreetech_tft42, bigtreetech, stl
3
3.0
May 21, 2021
05/21
by
Mark Forbes (Marfor)
data
eye 3
favorite 0
comment 0
UPDATE:16/12/19 Modified the reset button so it has less of a recess and this helps it sit more proud of display face. Also closed up the SD card slot a bit more and put in a recess around USB slot to help with bigger/chunkier USB memory sticks. Needed a display mount for my Bigtreetech TFT35 E3 V3.0 and couldnt find anything that fitted correctly as SD card is on the RHS on V3.0. Looked at LCD 12864 displays but the rotary switch and rest were not aligned correctly. its still being tinkered...
Topics: Ender5, thingiverse, TFT35, bigtreetech_skr, Ender3, Ender_3, TFT_Screen, bigtreetech_tft35_v3, 3D...
3
3.0
Mar 26, 2021
03/21
by
Peter M. (BigFunkyMan)
data
eye 3
favorite 0
comment 0
Bigtreetech TFT35 3.0 Case Now with the right front ;) https://youtu.be/v2-I9ZMZlI0
Topics: stl, thingiverse, TFT35_3.0, TFT35, bigtreetech, BIGTREETECH_TFT35, 3D Printer Parts
4
4.0
Mar 13, 2021
03/21
by
Corey Rowe (Whifflesauce)
data
eye 4
favorite 0
comment 0
I really like hukama's screen case (https://www.thingiverse.com/thing:3950607). But the mounting bracket/wall makes it sit too high and I ended up braking it being clumsy. So I decided to try out modeling and made this thing. You will still need his screen case, this is only the bracket it sits on. The bracket has been designed like a frame to reduce print time and reduce filament usage. It should print just fine without supports as long as your printer is calibrated and doesn't have a problem...
Topics: 3D Printer Accessories, TFT35, thingiverse, bigtreetech, stl, mounting_bracket, bigtreetech_tft35_v3
4
4.0
May 1, 2021
05/21
by
Leo Visser (3dpartmaker)
data
eye 4
favorite 0
comment 0
Screwless BIGTREETECH TFT35 V2.0 smart touch screen case. The buzzer sound is directed outwards and the light from the power indicator LED is visible. Two small cable ties are used over the cable clamp to secure the electric cable. The drawn print support of the cable output hole would be easy to break out with a small screwdriver pressed and tilted into the hole. Printed with PETG filament and 0.2 layer height was used.
Topics: stl, Bigtreetech_TFT35_V2, TFT35_V2.0, 3D Printer Accessories, thingiverse, BIGTREETECH_TFT35
3
3.0
Jun 12, 2021
06/21
by
Don Gamble (gamble604)
data
eye 3
favorite 0
comment 0
Three part case for the SKR Pro v1.2 with a TFT35 screen used to run a Primo MPCNC. External connectors are DB25 (stepper motors) and DB15 (end-stops and probe). Print Sloped Top with screen on the printed bed. Print Lid with bottom facing up. No supports needed.
Topics: MPCNC_Primo, BIGTREETECH_TFT35, Tools, bigtreetech_skr, MPCNC_Add-On, thingiverse, stl
3
3.0
Mar 13, 2021
03/21
by
Alex Art (u-maker)
data
eye 3
favorite 0
comment 0
Box for the electronics of a 3D printer based on Bigtreetech SKR mini v1.1 At the bottom part there are mounting holes for the heating bed power expansion modules known to me. Hole for the USB and SD card slot are made in the front sidewall (requires print support!). The rear sidewall is mounting. It has prepared holes for installing the box on the printer and holes for entering wires inside. Outside Dimensions: 170 * 90 * 50 mm
Topics: 3D Printer Parts, skr_mini_v11, thingiverse, SKR, bigtreetech, stl, bigtreetech_skr
3
3.0
Jan 8, 2021
01/21
by
Serhiy (MSergW)
data
eye 3
favorite 0
comment 0
New leg and box holder for https://www.thingiverse.com/thing:4338772. With the old one there was a problem - the screws were loosened when the screen was tilted. For a new need 1 Screw M3*20 Source: https://www.tinkercad.com/things/6MTKcp7DejL
Topics: stl, BIGTREETECH_TFT35, thingiverse, bigtreetech_tft35_v3, TFT35, 3D Printer Accessories
6
6.0
Mar 31, 2021
03/21
by
Toshinobu Yamamoto (Toshi_Yamamoto)
data
eye 6
favorite 0
comment 0
This is a mount bracket of BIGTREETECH TFT35 V3 for Anycubic i3 MEGA. You can put the TFT screen in front of MEGA(left or right). Needed Parts 8 x M3 15mm screw. 4 x M3 screws are used for TFT case. 2 x M3 are used for case and bracket. You should remove original M3 screws of Y shaft holder and use 15mm screw instead.
Topics: thingiverse, bigtreetech, Anycubic_I3_Mega, 3D Printer Accessories, BIGTREETECH_TFT35, stl
3
3.0
Jan 4, 2021
01/21
by
Mike Stahnke (Meikkal)
data
eye 3
favorite 0
comment 0
User tjsc5f did a great job making a fantastic looking BIGTREETECH TFT 3.5 v2 mount for the BLV MGN Cube https://www.thingiverse.com/thing:3857312 but I wanted to use the TFT35 v3. I couldn't find anything that looked as great so it only made sense to remix the great one tjsc5f already created. I have also remixed the mount created by tjsc5f also. I wanted to keep the original pushbutton holes on top as that is the location I am going to turn on/off air scrubber, leds and things of that nature....
Topics: stl, 3D Printer Parts, BIGTREETECH_TFT35, thingiverse, bigtreetech_tft35_v3, TFT35
3
3.0
Mar 25, 2021
03/21
by
lm ig (lmig)
data
eye 3
favorite 0
comment 0
Just a simple universal case for the electronics of my printer (mounte on a 20x20 V-Slot profile). The fan size on top is 80mm.
Topics: stl, 3d_printer, thingiverse, raspberry, bigtreetech, 3D Printer Parts, bigtreetech_skr
5
5.0
Jan 7, 2021
01/21
by
Robert Cigán (robertcigan)
data
eye 5
favorite 0
comment 0
Box with a mount for my SKR BTT UPS v1.0 for my Mk3 Bear upgrade.
Topics: bigtreetech, bigtreetech_skr, stl, 2020, UPS, box, thingiverse, 3D Printer Accessories
3
3.0
Apr 2, 2021
04/21
by
Radek Zobal (Radekz)
data
eye 3
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/f5xMr9yr98G
Topics: 3D Printing, thingiverse, case, TFT35, Bigtreetech, BIGTREETECH_TFT35, stl, ender3, LCD
3
3.0
Mar 19, 2021
03/21
by
Serhiy (MSergW)
data
eye 3
favorite 0
comment 0
Вдохновился моделями: - https://www.thingiverse.com/thing:3892049 (задняя панель и крепления) - https://www.thingiverse.com/thing:4154071 (передняя панель) Взял от них самые удачные(по моему скромному мнению) решения и сделал свой вариант коробки для экрана TFT35 v3.0 Гайка M3 = 8 шт. Винт M3x10 = 8 шт. ------------------------ Inspired by the...
Topics: biqu, bigtreetech, TFT35, BIQU_TFT35, BTT, TFT_Screen, thingiverse, bigtreetech_tft35_v3,...
3
3.0
Jun 11, 2021
06/21
by
Lord Jin (jin0711)
data
eye 3
favorite 0
comment 0
m3 Countersunk screws and nuts required
Topics: BIGTREETECH_TFT35, bigtreetech_tft35_v3, TFT35, 3D Printer Parts, thingiverse, replicator_2X, stl
