2
2.0
Aug 8, 2021
08/21
by
Chris Riley (brotherchris)
data
eye 2
favorite 0
comment 0
This is a remix of a mount I can no longer find, I just made it a little thicker.
Topics: bltouch, thingiverse, 3D Printer Parts, geeetech, bltouch_mount, stl
3
3.0
Mar 25, 2021
03/21
by
David Vega (davidveg)
data
eye 3
favorite 0
comment 0
Update: Lower level of the support a little to match the BlTouch correct height. (Use STL-V2). This Headmount was also made for the Twotrees Bluer. It's for the standard-hotend. What you need is a 50mm fan for the front. I Mixed with a BLTouch Support found in https://www.thingiverse.com/thing:4412334 Print with 60% Infill at Least with PETG or ABS. I don't recomend PLA. Offset for the Mount: X: 46 Y:-9 Z: -0.9 for me (Could vary by BLTouch Model )
Topics: stl, bluer, thingiverse, bltouch_mount, BLTouch, 3D Printer Accessories
3
3.0
Jan 6, 2021
01/21
by
Sami Haahtinen (ressukka)
data
eye 3
favorite 0
comment 0
I wanted to use the Skelestruder V1 as my extruder, but since I have a custom built printer and a BLTouch, I needed to modify the pinda rack to fit a BLTouch. It's using the pinda rack from [the original skelestruder](https://www.thingiverse.com/thing:2845416) as a base so that the dimensions for the mount are accurate.
Topics: skelestruder, stl, bltouch_mount, 3D Printer Parts, BLTouch, thingiverse
4
4.0
Jan 6, 2021
01/21
by
Danny Vo (ReSummit)
data
eye 4
favorite 0
comment 0
I saw on my Ender 3 V2 that I had screw holes that was intended for Creality's new BLTouch kit. I really like the mounts from prydonian and puturai, but both versions of the mount require the use of nuts to hold the BLTouch in place. Thus, I used FreeCAD and Onshape to add screw threads to prydonian's model. I used Parametric Parts' thread creator to make the screw threads in the model (just to make it easy to add the threads):...
Topics: Ender3v2, stl, bltouch_mount, 3D Printer Parts, BLTouch, thingiverse
5
5.0
Apr 1, 2021
04/21
by
Toni Brota (T_B_A)
data
eye 5
favorite 0
comment 0
__(Description in german below // Deutschsprachige Beschreibung folgt unten)__ I wanted my BLTouch probe as close as possible to the nozzle without getting in the way of the fan - neither the inlet nor the outlet. I came up with this solution. The holder is simply plugged onto the fan (in my case a 4020, since I replaced the original fan - but there is also a (untested) file for a 4010). It should sit tightly on the fan so that nothing wobbles. __Please post your make. Thank you. :-)__...
Topics: BLTouch, thingiverse, 3D Printer Parts, bltouch_mount, hemera, stl
9
9.0
Jan 17, 2021
01/21
by
Morten Nielsen (dintid)
data
eye 9
favorite 0
comment 0
A simple but durable and versatile mount for the BLTouch. I used it on my BeTrue3D Printer but it can easily be used anywhere else. Especially since I included the step-files. I've incldued my model of the BLTouch as well, as it can be usefull :) If you want to read more about my printer, you should go to my blog at: https://www.betrue3d.dk
Topics: 3D Printer Accessories, BLTouch, bltouch_mount, thingiverse, BeTrue3D, stl
4
4.0
Mar 13, 2021
03/21
by
Anthony Lord (frogtwat)
data
eye 4
favorite 0
comment 0
Designed this BLTouch mount for the SK-GO to sit just inside the stock cooling duct. Uses the main mounting screw to attach. Works for me @ #define NOZZLE_TO_PROBE_OFFSET { 22, 9.27, -1.3 } Printed for about 2 weeks now with no visible heat issues.. using PLA+
Topics: 3D Printer Parts, bltouch_mount, thingiverse, stl, seckit_skgo
3
3.0
Jan 8, 2021
01/21
by
Chris Geistlinger (Slingermakes)
data
eye 3
favorite 0
comment 0
BLTouch probe mount that I drew up for my TwoTrees Sapphire Plus. On my machine, I ended up with a Y-offset of -42mm and a Z-offset of -1.8mm B.O.M. 4x M3x8 screws 2x M3 nuts
Topics: stl, bltouch_mount, twotrees_sapphire, thingiverse, 3D Printer Accessories
2
2.0
Sep 13, 2021
09/21
by
Kappa Kappovsky (kejkla)
data
eye 2
favorite 0
comment 0
BLTouch mount for Voxelab Aquila with thinner wall for extra 1mm gap between nozzle tip. Works with Mini-Me v4 shroud > https://www.thingiverse.com/thing:4375296
Topics: stl, thingiverse, Voxelab_aquila, 3D Printer Parts, bltouch_mount
3
3.0
May 1, 2021
05/21
by
Spasoja Stojsic (SpaxMk)
data
eye 3
favorite 0
comment 0
Ender 3v2 Vinyl Cutter Knife Blade mount for BLTouch Use two M3x10mm or M3x15mm hex head screws Required X, Y & Z offset
Topics: stl, bltouch_mount, Ender, 3D Printer Parts, thingiverse, cutter
4
4.0
Mar 15, 2021
03/21
by
Mariano Cosentino (marianok)
data
eye 4
favorite 0
comment 0
This is a Remake/derivative of my previous work in order to mount layer fan and a BLTouch sensor on the MakerParts All-Metal MK2 v2. It's similar to the one I did for MK2v1, but this one is for MK2v2. The pictures ware just taken, I haven't used it for printing yet as I have to adjust the settings on the Marlin firmware with the new sensor position. In case you need it, the values came to y=-35,x=+5 (z will depende on your settings, but easily adjustable in settings) Este es un Remake/derivado...
Topics: thingiverse, Makerparts, BLTouch, bltouch_mount, stl, 3D Printer Parts
4
4.0
Mar 15, 2021
03/21
by
Mariano Cosentino (marianok)
data
eye 4
favorite 0
comment 0
I grabbed JMR3Done design and added a support for the BLTouch sensor. I have printed it but was unable to use it as the original support is for a different Printer model, so I can not attest for functionality. However, a test setup show the BL sensor about an Inch forward of the tool fan, so it should be good. Tome el diseño de JMR3Done y le agregue un soporte para un sensor BLTouch. Lo imprimí pero no pude usarlo ya que el soporte original parece ser para un modelo distinto de impresora,...
Topics: thingiverse, Makerparts, BLTouch, bltouch_mount, stl, 3D Printer Parts
2
2.0
Dec 14, 2021
12/21
by
Ari Mandjelikian (arim215)
data
eye 2
favorite 0
comment 0
Created some space on the side duct mount to allow the installation of the bl touch mount that came with my bl touch (similar to this mount but in metal : https://www.thingiverse.com/thing:3978365 ) Much more solid then using the mount i designed that conformed to the original side duct
Topics: bltouch_mount, stl, thingiverse, Hydra, 3D Printer Parts, BLTouch
3
3.0
Jan 7, 2021
01/21
by
Umran Abdulla (umranium)
data
eye 3
favorite 0
comment 0
Remix of [jkostenov's bltouch mount](https://www.thingiverse.com/thing:4462870) for the Ender 3 V2 to allow for [the direct drive](https://www.thingiverse.com/thing:4555065)
Topics: Ender3v2, stl, bltouch_mount, BLTouch, thingiverse, 3D Printer Accessories
3
3.0
Jan 4, 2021
01/21
by
Vojtěch Popela (vpopela)
data
eye 3
favorite 0
comment 0
I dont know why, but there is no working bltouch mount atached. So I created my own.
Topics: 3DTouch_mount, stl, bltouch_mount, thingiverse, 3D Printer Accessories
7
7.0
Jan 21, 2021
01/21
by
Alexander Voglsperger (MrMinemeet)
data
eye 7
favorite 0
comment 0
A remix of thing:2990086 as it was a bit to thick o that my sensor scraped a bit when the pin was pulled in. So I made it a bit thinner that I have enough room for messuring the distance and printig without the fear of pulling something away with the sensor. Sadly the screw on my BL touch had worn out too much to change the hight of the measure tip. As a sensor I used this clone from Aliexpress: http://bit.ly/2McIHrB Here are the approximate offset for the sensor -40 X and -10 Y
Topics: 3D Printer Parts, Creality, BLTouch, bltouch_mount, thingiverse, Ender3, stl
3
3.0
Jun 6, 2021
06/21
by
Hou Ler (Houler)
data
eye 3
favorite 0
comment 0
This clip helps to secure the BLTouch / 3D Touch bed leveling wires (even fan wires) and prevents those wires from flailing around while printing. Updated 06Aug19 - File Rev. 3 - Made both ends of the clip the same shape without losing functionality. Enjoy!
Topics: thingiverse, Bondtech_extruder, stl, bltouch_mount, 3D Printer Accessories, BLTouch
2
2.0
Jan 18, 2022
01/22
by
nadav mavor (nmavor)
data
eye 2
favorite 0
comment 0
the bltouch mount my prob to low so I trim the mount
Topics: thingiverse, Aquila, Voxelab_aquila, stl, 3D Printer Parts, bltouch_mount
3
3.0
Jan 19, 2021
01/21
by
Daniel Kreuzhofer (danielcrosslink)
data
eye 3
favorite 0
comment 0
Fixed the other remix that was broken by recreating the mounting blocks with screw taps for the bltouch mount
Topics: 3D Printer Parts, BLTouch, bltouch_mount, thingiverse, Ender_3, stl
6
6.0
Mar 17, 2021
03/21
by
Saeid Ansaripour (saeidans)
data
eye 6
favorite 0
comment 0
this is a BLtouch mount you can use for FLSUN i3 with 300x300x400 single extrude
Topics: bltouch_mount, 3D Printer Accessories, stl, thingiverse, 28mm, flsun_i3
4
4.0
May 1, 2021
05/21
by
Antoine Ty (Tytoine)
data
eye 4
favorite 0
comment 0
I design this thing to have the BLToucg, the nearest as possible to the nozzle. This is for the stock extruder. You will need : * 2 m3 nuts * 2 m3x8 (minimum) screws The gcode is provided for the Artillery Genius Installation : Remove the spacer between rear of the extruder motor and the pcb, and put this part instead.
Topics: stl, bltouch_mount, artillery, artillery_genius, 3D Printer Parts, thingiverse
3
3.0
Oct 29, 2021
10/21
by
Bastiaan Versluis (bversluis)
data
eye 3
favorite 0
comment 0
BL touch mount for the Printermods XChange. Attaches the BL touch to the base plate, so you won't need a BL touch for every toolplate. A wide and a small version are available. Printed with ASA+, 0.1 mm layer height and supports needed. Can be mirrored in your slicer and mounted on either side of the base plate. Short M2 screw, lockwasher and nut needed to attach the base plate to the Xchange. 2 M2 thread inserts and a short M2 screw and washer need to mount the BL touch mount to the base plate.
Topics: thingiverse, 3D Printer Parts, stl, bltouch_mount, xchange, printermods
2
2.0
Sep 14, 2021
09/21
by
(Magic-Goat)
data
eye 2
favorite 0
comment 0
Loved the original and it works so well. I needed somewhere to mount my BL touch so modified this design. There's no adjustment so you just have to dial it in with the software offset (I use 3mm). I should add, i didn't like seeing the label on the fan so i modded it so it's the other way around. You can't just mirror the part as the screws are not centered on the model!
Topics: stl, thingiverse, cooling_fan, BMG_clone, DIY, bltouch_mount
4
4.0
Mar 8, 2021
03/21
by
Ben Norcutt (plexer)
data
eye 4
favorite 0
comment 0
Mount for BLTouch and clones to RepRapPro Mendel X axis carriage
Topics: BLTouch, stl, thingiverse, reprappro, 3D Printer Accessories, bltouch_mount
4
4.0
Apr 1, 2021
04/21
by
Greg Steeves (styk)
data
eye 4
favorite 0
comment 0
Replacement mount for stock hotend mount on a Geeetech A20m printer. The stock hotend is designed to mix or switch 2 colors. However, they are prne to clogging. As several other users have already posted things to use other brands of switching hotends I designed this one for the Homyl 3D Printers Assembled Color Switch Extruder which I found on amazon.ca. The mount attache using only the top 2 bolts The original use 4 with the bottom ones being installed from the rear side which were a PITA to...
Topics: 3D Printer Parts, thingiverse, dual_extruder, bltouch_mount, stl
5
5.0
Mar 22, 2021
03/21
by
jeff ranger (jranger615)
data
eye 5
favorite 0
comment 0
7/17/19 - Updated...Shortened as it was too long, Also squared it back off for structural support and readjusted screw holes Testing a front mount Bltouch. This will go in front of the Fan and be a offset Y instead of X Will require longer screws for mounting through the fan and mount to the front 40mm setup
Topics: stl, 3D Printer Accessories, bltouch_mount, thingiverse, Tevo_nereus
3
3.0
Mar 26, 2021
03/21
by
Shawn Byrne (ShuhDonk)
data
eye 3
favorite 0
comment 0
BLTouch mount for Sovol SV01, nozzle offset of -33, -11.
Topics: stl, thingiverse, bltouch_mount, sovol, 3D Printer Parts, sv01
7
7.0
Jan 20, 2021
01/21
by
Cody Stevenson (Orgasmicbanana)
data
eye 7
favorite 0
comment 0
A customized version of a nozzle fan i found. modified to add my bltouch sensor
Topics: 3D Printer Parts, BLTouch, bltouch_mount, thingiverse, Ender3, stl
10
10.0
Jan 13, 2021
01/21
by
Chris Zindrick (3DPrintPadawan)
data
eye 10
favorite 0
comment 0
This BLTouch mounts to the top fan holes - you may need some longer bolts to mount this.
Topics: thingiverse, tevo_tarantula, stl, 3D Printer Accessories, bltouch_mount
3
3.0
Jan 6, 2021
01/21
by
Hayden (Power_fpv)
data
eye 3
favorite 0
comment 0
I found the included BLTouch mount was either too tall on the top hole, or too short on the bottom for me. So I extended it a bit :)
Topics: herome, stl, bltouch_mount, BLTouch, thingiverse, 3D Printer Accessories
3
3.0
May 1, 2021
05/21
by
Ammar Faridi (ammaryasir)
data
eye 3
favorite 0
comment 0
A simple BLtouch cover
Topics: stl, bltouch_mount, cover, 3D Printer Parts, BLTouch, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Gregory Santana (GregTheGreatOne)
data
eye 6
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/82LE0v8qbSu
Topics: thingiverse, bltouch_mount, 3D Printing, stl, bl touch, BLTouch
6
6.0
Mar 16, 2021
03/21
by
Arthur Hoke (ArtieH)
data
eye 6
favorite 0
comment 0
The Smart BLTouch height difference dimension from the bottom of the sensor housing to the nozzle tip is 8mm +/- .5mm. This remix adjusts the guage height to 8mm. See [ProtomakerSprint](https://www.thingiverse.com/ProtomakerSprint)'s design post for usage instructions and videos. Thank you ProtomakerSprint for this gauge it made adjustment a snap.
Topics: bltouch_mount, 3D Printer Accessories, stl, gauge, thingiverse, BLTouch
4
4.0
Mar 10, 2021
03/21
by
VJ Maker (VJ-Maker)
data
eye 4
favorite 0
comment 0
mounting pads of various thickness from 1mm to 10mm for mounting the BLTouch sensor They allow you to lower the sensor without having to change the entire fixture. Just add the appropriate washer or washers and lower the sensor by the desired length for M3
Topics: BLTouch, stl, thingiverse, washers, bltouch_mount, 3D Printer Parts
4
4.0
Mar 22, 2021
03/21
by
john alt (dblalt)
data
eye 4
favorite 0
comment 0
I designed this for my ft6 , it has a extended block at the top for y endstop and is a prototype for bltouch smart . i printed at 50% infill. part 2 should be reoriented for strength
Topics: stl, 3D Printer Parts, bltouch_mount, thingiverse, folgertech_ft6
2
2.0
Dec 14, 2021
12/21
by
Ari Mandjelikian (arim215)
data
eye 2
favorite 0
comment 0
This is a part i designed inspired buy the thingiverse sources listed. I wanted a side mount for my ender 3 proand to keed it at original spot UPDATE I prefered redesigning the side mount duct to allow the installation of the original bl touch mount for the ender 3 pro https://www.thingiverse.com/thing:5156237
Topics: bltouch_mount, stl, thingiverse, Hydra, 3D Printer Parts, BLTouch
4
4.0
Mar 15, 2021
03/21
by
YOCH TOT (x1200idt)
data
eye 4
favorite 0
comment 0
Use https://www.thingiverse.com/thing:1102859
Topics: thingiverse, diamond_hotend, bltouch_mount, stl, 3D Printer Parts
7
7.0
Apr 18, 2021
04/21
by
BRANDON KERN (MINE122)
data
eye 7
favorite 0
comment 0
Manually adjustable BLTouch mount.
Topics: bltouch_mount, 3D Printer Parts, thingiverse, stl, 3DTouch, BLTouch
6
6.0
Mar 17, 2021
03/21
by
Scott Alfter (salfter)
data
eye 6
favorite 0
comment 0
Upon testing the gap with with this alignment spacer (https://www.thingiverse.com/thing:2267858/), I found I needed to raise the BLTouch by 1 mm. I figured the best way to do that was to take a section of the mount I was already using and create a slice from it in the thickness I needed. If printed in the same filament as the mount, it'd be nearly invisible. Even here, with the mount in PETG and the shim in PLA, you'd have to look closely to tell there are two pieces. OpenSCAD source provided,...
Topics: bltouch_mount, 3D Printer Accessories, stl, thingiverse, Anet_A8
4
4.0
Jan 6, 2021
01/21
by
Dhash Gunaratne (Dhash)
data
eye 4
favorite 0
comment 0
I designed this mount so that you can install it without removing anything. All you need is 4 M3 x 5to6mm screws. Good Luck!!!
Topics: stl, ANTCLABS, bltouch_mount, 3D Printer Parts, BLTouch, thingiverse
3
3.0
Jun 12, 2021
06/21
by
James Green (jimbobsoss)
data
eye 3
favorite 0
comment 0
Not seen one on here but made a BLtouch bracket/ spacer so sensor is not right against back locking nut. Think this is the old type bracket? Not sure but seen others with longer bracket.
Topics: Nereus, thingiverse, 3D Printing, tevo, BLTouch, bltouch_mount, stl
6
6.0
Apr 20, 2021
04/21
by
Juan Rosario (Sindarius)
data
eye 6
favorite 0
comment 0
This is my first attempt at putting together a BL Touch Mount for the Crane Quad. First version of this works but is butting up against one of the extruder motors. I wanted to get something out there for people to play with and remix. https://www.youtube.com/watch?v=GAAmcPl-cwQ V3 This version is a bit easier to install and you're able to adjust the height further up depending on how your printer is set up. V2 Broke the bracket into two parts and made it height adjustable. I highly recommend...
Topics: thingiverse, 3D Printer Parts, stl, bltouch_mount, BLTouch, Crane
0
0.0
Aug 14, 2022
08/22
by
Sergey Basmanov (sba230)
data
eye 0
favorite 0
comment 0
This is BLTouch mount for K3D printhead. Doesn't require any modifications to original parts. After print, make sure parts connect tight with each other. Use knife if needed :) Mounting: use original ender screw (M3x6) and another M3x6 screw with nut to connect parts together. When mounted, put head down to the table and put something 2mm thick under BLTouch tip (see attached photo). According to BLTouch manual, there must be 2mm height between tip and nozzle. After that adjust probe offset...
Topics: 3D Printer Extruders, Ender_3, stl, bltouch_mount, thingiverse
5
5.0
Mar 2, 2021
03/21
by
Iljitsj Bos (ixbos)
data
eye 5
favorite 0
comment 0
This is a mount for the BLTouch (3D Touch, etc.) which mounts inside the extruder carriage. #define X_PROBE_OFFSET_FROM_EXTRUDER -30 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 16 // Y offset: -front +behind [the nozzle]
Topics: BLTouch, 3D Printer Parts, thingiverse, bltouch_mount, Anet_A8, stl
10
10.0
Jan 12, 2021
01/21
by
Michael Lancaster (Alpha0724)
data
eye 10
favorite 0
comment 0
Printed and confirmed it fits nicely. Current offsets thus far are: X: -40 Y: -11 Modified to allow bltouch to sit to right of mounting point. **If you print this please let me know how it fits.**
Topics: thingiverse, stl, 3D Printer Parts, Tronxy_P802E, bltouch_mount, BLTouch
12
12
Jan 10, 2021
01/21
by
Kedi Bekar (kedibekar3D)
data
eye 12
favorite 0
comment 0
Mount a BLTouch to your printer even if the integral bracket has been broken.
Topics: thingiverse, stl, 3D Printer Parts, bltouch_mount, BLTouch_Classic, BLTouch
9
9.0
Mar 12, 2021
03/21
by
Florian Franzmann (FFranzmann)
data
eye 9
favorite 0
comment 0
Adjustable mount for BLTouch. Parts needed: 1 M4 screw for leveling, 1 spring (not to weak) 1 Injection nut M4 outer diameter 6mm 1 M4 washer (goes between screw head and plastic of course) Fit is quite tight so maybe you need to adjust the base a little bit upwards or file the hole a bit bigger. The BLTouch_base_sideway can be used on the lulzbot taz 6 X-carriage. The BLTouch_mount_max_lenght is the maximum lenght you can use. Print in
Topics: 3D Printer Accessories, bltouch_mount, thingiverse, sensor_mount, BLTouch, stl
4
4.0
Mar 8, 2021
03/21
by
Jacqui Doyle (Moxxxie)
data
eye 4
favorite 0
comment 0
This is a BLTouch Mount that mounts directly onto the side of the 713Maker Ultralite FT5 Carriage. It has adjustable height settings so this will work with a Titan Aero, with or without Volcano Hot End. I've got mine attached to the second holes, and have a -1.3 Z offset.
Topics: FT5, BLTouch, stl, thingiverse, 713maker, bltouch_mount, 3D Printer Parts
5
5.0
Mar 3, 2021
03/21
by
Tom Simpson (tslove28)
data
eye 5
favorite 0
comment 0
I used the plate left over from my M3 ID Bltouch upgrade to modify my M2. I added the block that holds the stepper motor and the Bltouch mount. It required the part attaching the plate to the belt to also be modified. The rest of the parts are from the Makergear ID3 printable parts site. I also installed the latest Marlin firmware (1.1.9). I've attached the Configuration.h and Configuration_adv.h files. I tried to use the same values from the original Makergear M2 firmware whenever possible. My...
Topics: MakerGear_M2, BLTouch, thingiverse, bltouch_mount, 3D Printer Extruders, stl
3
3.0
Mar 25, 2021
03/21
by
Maikel Hoek (RyaReddy)
data
eye 3
favorite 0
comment 0
Heyooo, I love both the direct drivinator and Smooth fang. The combination was a bit tricky, so made some mods. The are my first remixes but i am proud. The Direct Drivinator has been modified to have a mounting point for the fang plate. Zip-ty mount removed and a section of front facing side plate to have more room for the Fang. The Fang mounting plate is moddes to have a resess for the right bolthead. And a hole to match the direct drivinator remix. The BLtouch mount is redesigned to be more...
Topics: stl, fang, thingiverse, direct_drive, bltouch_mount, 3D Printer Extruders
