0
0.0
Apr 19, 2022
04/22
by
XrControl noc0815@gmail.com (XrControl)
data
eye 0
favorite 0
comment 0
This is a table bottle holder for tabletop up to 30mm. The hole in the middle is to attach it with a screw(cut the plastic spring). see pictures https://www.youtube.com/watch?v=qvnR2018dbc&t=0s
Topics: Household, thingiverse, table bottle holder, bottle_holder, stl
1
1.0
Oct 29, 2021
10/21
by
Jan Vanders (JanVanders)
data
eye 1
favorite 0
comment 0
This is a simple wine bottle holder. it's specially designed for bottles which are wider at the top.
Topics: thingiverse, bottle_holder, Wine_Bottle_Holder, Kitchen & Dining, stl
6
6.0
Jan 19, 2021
01/21
by
Christian Budde (phelyan)
data
eye 6
favorite 0
comment 0
These will hold a number of things to a number of other things, and are designed to be clamped onto 20mm tubes such as on bikes, table legs or wheelchairs. There were a couple of things that I didn't quite like about the previous version, and the rings themselves proved to be a little too thin for rough handling, so this version has strengthened them to 4mm thickness. The rings and the fasteners are now straight. The rings come in three sizes, 65mm, 70mm, and 75mm roughly. You will also need: -...
Topics: sports bottle holder, hold my beer, water bottle holder, thingiverse, Sport & Outdoors, bottle...
3
3.0
Mar 22, 2021
03/21
by
Krzysztof Czarnecki (Ultor3)
data
eye 3
favorite 0
comment 0
This is a bottle holder for bicycle with typical screw placement (M5 screws 64mm apart) and of springy construction, so that bottles of different diameter can be inserted and stay in firmly. It also has hooks that you can put rubber bands on if the bottle is so small or heavy that spring action alone doesn't hold it in place. It can hold 0.5L-1L bottles at least theoretically, but it's new and I haven't tested it yet on a moving bicycle, that's why it's a "work in progress".
Topics: stl, bottle_holder, Bike_bottle_holder, bicycle, bike, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
by
Roy Darnell (ristlin)
data
eye 0
favorite 0
comment 0
This is a bottle holder designed for nalgenes to hold them in a slight angle when filling them. Deesigned with a generative design algorithm, to look cool...
Topics: angled_bottle_holder, thingiverse, holder, angle_bottle_holder, slope_bottle_holder,...
8
8.0
Jan 18, 2021
01/21
by
Rene Bollengier (Reneb3)
data
eye 8
favorite 0
comment 0
I used the bracket designed by egman17 and added a bottle holder to it. Designed for a 16.9 oz bottle. I used PLA at 35% infill. If she breaks it I will make it stronger. Update, she has broken the water bottle holder once, the PLA is a bit brittle. I have swithed it to ABS and 50% infill for the holder. Seems to be holding up.
Topics: Walker, thingiverse, bottle_holder, water_bottle_holder, wheelchair, Organization, stl
3
3.0
Apr 8, 2021
04/21
by
Hannes Mautz (morieris)
data
eye 3
favorite 0
comment 0
Easy to print and assemble bottle holder. For bottles with a diameter of 60mm. Both parts need to be printed twice.
Topics: stl, Organization, thingiverse, bottle_holder
2
2.0
Jun 20, 2021
06/21
by
Bo Kristensen (kbb105)
data
eye 2
favorite 0
comment 0
I was tired my holder swing when I take out bottles, so I designed this and no more bottles falling out. Simple print with recommended settings in Luban
Topics: stl, thingiverse, bottle_holder, Bathroom
3
3.0
Apr 16, 2021
04/21
by
Max Silantyev (RubyFOX)
data
eye 3
favorite 0
comment 0
Holder for bottles in the bathroom
Topics: bottle_holder, Bathroom, thingiverse, stl
3
3.0
Apr 20, 2021
04/21
by
Mikhail Tarasov (RUSich)
data
eye 3
favorite 0
comment 0
bottle hand holder
Topics: thingiverse, stl, Office, bottle_holder
8
8.0
Mar 21, 2021
03/21
by
Dan O'Connell (O3D)
data
eye 8
favorite 0
comment 0
Fridge bottle holder #####Find me on: | | | | | | | | | | | | | | |------|
Topics: fridge bottle holder, Kitchen & Dining, holder, bottle_holder, stl, bottle, fridge, thingiverse
3
3.0
Mar 20, 2021
03/21
by
Tony Cervantes (tc_fea)
data
eye 3
favorite 0
comment 0
This is a simple solution for an old problem. I was tired of waiting for the hair gel to flow to spout when I turned the bottle over. This device holds the bottle upside down so the gel is always ready to dispense immediately. This would also work well for shampoo bottles that are nearly empty. The holder is sized for a 28.5 mm diameter hole that is about 25 mm long. This gave the 27.5 mm cap, 1 mm clearance on the diameter. For other hole sizes simply scale the .stl by the following ratio:...
Topics: thingiverse, bottle_holder, stl, Bathroom
1
1.0
Dec 13, 2021
12/21
by
Claude Paradis (paradiscla)
data
eye 1
favorite 0
comment 0
simple square bottle holder
Topics: bottle_holder, stl, Organization, thingiverse
2
2.0
Mar 31, 2021
03/21
by
Bob Avery (Bob99)
data
eye 2
favorite 0
comment 0
This is an epoxy bottle holder to hold partially used bottles (4.5 ounce size) upside down for faster use. Each cavity has a ‘cup’ at the bottom to catch escaped resin in the event the bottle cap pops off - which happens sometimes when the temperature or barometric pressure change dramatically. There are many similar bottle holders to be found on the internet so this one adds to your available choices. Supports are not absolutely necessary but they will help to ensure that the print goes...
Topics: thingiverse, Tool Holders & Boxes, Epoxy bottle holder, Epoxy_Holder, Epoxy, Bottle holder, stl
3
3.0
Mar 22, 2021
03/21
by
Eat Sleep Make Repeat (eat_sleep_make_repeat)
data
eye 3
favorite 0
comment 0
This is a water bottle holder for two pet bottles. The bottles have a diameter of 50 mm, the caps have a diameter of 32 mm.
Topics: hamster, Guineapig, Pets, bottle_holder, stl, pet, PET_BOTTLE_HOLDER, rabbit, Pet_bottle,...
3
3.0
Apr 12, 2021
04/21
by
Aram Perez (aramperez)
data
eye 3
favorite 0
comment 0
I had this ship in a glass bottle that didn't have a holder so I made one. I'll update it later to so you can customize it. For now, the dimensions are: * Bottle diameter: 56 mm * Neck diameter: 17.2 mm * Length: 195 mm
Topics: thingiverse, stl, bottle_holder, Decor
2
2.0
Mar 12, 2021
03/21
by
Fata Mun (fatamun)
data
eye 2
favorite 0
comment 0
This is a hair cream bottle holder. It keeps the bottle upside down so that the cream stays near the opening.
Topics: stl, thingiverse, bottle_holder, Bathroom
2
2.0
Mar 25, 2021
03/21
by
Tobias Jacobi (Makertobi)
data
eye 2
favorite 0
comment 0
Bottle holder for Renault Scenic to extend the original cup/can holder.
Topics: stl, bottle_holder, Automotive, thingiverse
2
2.0
Jan 3, 2021
01/21
by
Bob Avery (Bob99)
data
eye 2
favorite 0
comment 0
This is a holder for small bottles, such as bottles for eye drops. Small bottles have a tendency to tip over and this is useful for keeping them neatly organized.
Topics: Containers, bottle_holder, stl, thingiverse
3
3.0
Apr 12, 2021
04/21
by
Michal (Hubologista)
data
eye 3
favorite 0
comment 0
Another watering bottle holder this one is for 55cm bottle
Topics: thingiverse, stl, bottle_holder, Pets
2
2.0
Jul 3, 2021
07/21
by
Greg (GregulasMaximus)
data
eye 2
favorite 0
comment 0
Made a bottle cage for my bike designed to fit a standard 25oz Camelbak water bottle. Includes a slot for standard mounting bolts, should fit most bikes. Printed without supports using Monoprice Voxel. Used PLA for the print that I have. No issues so far. Would likely want to print in PETG at some point.
Topics: bottle_cage, bike_bottle_mount, Sport & Outdoors, bottle_holder, bike_bottle_holder,...
2
2.0
Jan 8, 2021
01/21
by
Rafael Rubio (Rafa78BCN)
data
eye 2
favorite 0
comment 0
Bottle Holder for the refrigerator.
Topics: bottle_holder, stl, Kitchen & Dining, thingiverse
8
8.0
Jan 9, 2021
01/21
by
Martin H. (maatin)
data
eye 8
favorite 0
comment 0
Its a replacement part for broken holder. I added a more robust version as the first one breaks to easy. If you like the model you may donate to this bitcoin adress: 1GEyje2RJaTyHL4M73a2D2Hfqv6CFDdHmc
Topics: bottle_holder, thingiverse, Outdoor & Garden, stl
1
1.0
Apr 19, 2022
04/22
by
uzosan zuko (uzosan)
data
eye 1
favorite 0
comment 0
Some water bottle just need to drain before reuse. That is a way that can preventing falling.
Topics: Gadgets, stl, bottle_holder, thingiverse
1
1.0
Mar 13, 2021
03/21
by
Simon Kong Win Chang (SkullKill)
data
eye 1
favorite 0
comment 0
keeps the sauce bottle upside down. useful when it's nearly finish. Tested on the MasterFoods 500ml and 275ml bottles. FreeCAD 0.18 file included
Topics: stl, Kitchen & Dining, thingiverse, bottle_holder
3
3.0
Mar 22, 2021
03/21
by
TFA Akina (UEPONYA)
data
eye 3
favorite 0
comment 0
paracode pet bottle holder
Topics: thingiverse, stl, PET_BOTTLE_HOLDER, Gadgets
3
3.0
Apr 23, 2021
04/21
by
Tho Lin (Viperninja74)
data
eye 3
favorite 0
comment 0
A holder to keep the bottles stable upside down after cleaning . Simple and fast printed .
Topics: bottle_holder, thingiverse, stl, Sodastream, Household
4
4.0
Mar 5, 2021
03/21
by
Python Grape (pythongrape)
data
eye 4
favorite 0
comment 0
I designed these bottle holders as I want to be able to carry the bottles with one finger, rather than having to use a full hand. When carrying a child, hands are somehow in short supply. I printed these in Colorfabb XT as it is FDA food contact approved, but obviously this is only as good as your nozzle and printer ... The 2 versions are for the 4 oz and 8 oz bottle. You may want to print one sample to check the fit of the bottle, the larger one works better for me by scaling x and y to 101%...
Topics: Kitchen & Dining, stl, bottle_holder, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Otto Weinhöfer (Russianfruitiman)
data
eye 6
favorite 0
comment 0
Print V2 or V3 cause its more stable. I printed V2 it in PLA cause of the overhangs. Holds and fits well ! and also looks nice. The distance between the Holes is 65mm. In Case you have somethig else near to this or want to place it higher or lower there is a V3 Langloch Version. Didnt print V3 jet but i will. I also correctet V2 Distance between holes. Its also 65mm now.
Topics: Vehicles, thingiverse, bottle_holder, bike, stl
6
6.0
Jan 17, 2021
01/21
by
Kurt Bellamy (kurtisonxp)
data
eye 6
favorite 0
comment 0
I needed a bottle holder for the side of my desk and this was the quickest way to print it
Topics: drink bottle holder, stl, Household, thingiverse
4
4.0
Mar 18, 2021
03/21
by
Daniel Berzl (Dane809)
data
eye 4
favorite 0
comment 0
A bottle holder for my kid's bed. The holder is for a Klean Kanteen Bottle or other bottles with a diameter of 74mm. I screw them up with a 4mm wood screw.
Topics: bottle_holder, stl, Household Supplies, thingiverse
0
0.0
Apr 20, 2022
04/22
by
SYLVAIN LOBJOIS (aquaterra51)
data
eye 0
favorite 0
comment 0
Support pour bouteille JBL 500 gr de CO2.
Topics: stl, Animals, co2_bottle_holder, thingiverse
3
3.0
Apr 11, 2021
04/21
by
James Graham (Jguytarist)
data
eye 3
favorite 0
comment 0
Not only does this wine bottle holder allow you to chill your holiday wine selection to the perfect temperature in your refrigerator, it also allows you to choose your wine without knocking over all of the other bits and pieces in your fridge. Modular construction allows you to stack your wine as high or low as your fridge shelves will allow. Happy holidays!
Topics: thingiverse, Kitchen & Dining, Bottle_Holder, Holder, Wine_Bottle_Holder, stl, Bottle,...
2
2.0
Jun 6, 2021
06/21
by
maik winkler (maikrotex)
data
eye 2
favorite 0
comment 0
A bottle holder to combine 4 empty or full bottles.
Topics: Kitchen & Dining, bottle_holder, stl, thingiverse
6
6.0
Jan 15, 2021
01/21
by
(greg3d)
data
eye 6
favorite 0
comment 0
Printed a quick holder for the spray and Shine, Used this to stop bottles from rolling around in trunk while driving to car shows. The bottles are 80 mm in Diameter.
Topics: bottle_holder, thingiverse, Automotive, stl, cleaner
1
1.0
Jan 19, 2022
01/22
by
Mark Morgan Lloyd (MarkMLl)
data
eye 1
favorite 0
comment 0
This is a "quick and dirty" bottle emptier intended primarily for cleaning products: detergent, thick bleach and so on. It comprises an outer shell with an air vent running up the middle, and a separately-printed threaded collar to suit the bottle. It incorporates the "2 Liter Bottle Holder with Funnel and Cap" by Laird Popkin which is used to generate the threaded collar.
Topics: thingiverse, bottle_holder, emptier, stl, Containers
2
2.0
Mar 19, 2021
03/21
by
Elwin Varkevisser (Gizzje)
data
eye 2
favorite 0
comment 0
As a fan of HG (https://hg.eu) cleaning products, I needed a better way to manage the storage of all the different bottles I have. This clamp holds a standard HG spray bottle. The bottle is inserted and removed by pushing or pulling it into the holding clamps. On my first try I used the strongest double sided tape that I could find to stick the clamp on the inside of my kitchen cabinet door. This tape proofed not to be strong enough when the clamp is holding a full, and therefore heavy, bottle....
Topics: thingiverse, bottle_holder, snapfit, Household, stl
3
3.0
Apr 13, 2021
04/21
by
Michael Hedman (CrimsonHam)
data
eye 3
favorite 0
comment 0
A rack for drying things like water bottles.
Topics: thingiverse, stl, bottle_holder, Kitchen & Dining
6
6.0
Jan 17, 2021
01/21
by
Andreas Evjenth (Evjenth)
data
eye 6
favorite 0
comment 0
When brewing beer, the bottles must be properly cleaned and sanitized. By setting the bottles upside down after use, the fallout will drain out of the bottle, and less water can be used to clean it. Printed without support. The piece is designe to hold a bottle with outer diameter of 29mm, but it can be scaled to any size.
Topics: bottle_holder, Kitchen & Dining, stl, thingiverse
9
9.0
Jan 14, 2021
01/21
by
melinda wyers (jetgirlart)
data
eye 9
favorite 0
comment 0
This is a simple unicorn bottle holster that will keep the bottles together when placed in your bag/purse/etc.
Topics: bottle_holder, vape, thingiverse, stl, Other
1
1.0
Jan 18, 2022
01/22
by
Delia Stephens (deliastephens)
data
eye 1
favorite 0
comment 0
A bike bottle cage for an American 12oz can. The can clicks into the slot. It is made in three pieces and then assembled using superglue (cyanoacrylate, CA). Do not drink and ride. This print is a WORK IN PROGRESS. I am not responsible if the cage (or you) break while riding your bike.
Topics: thingiverse, bike, beer_holder, bottle_holder, beer, Bike_bottle_holder, 3D Printing, stl,...
9
9.0
Mar 13, 2021
03/21
by
edwin wilson (Typhoon69)
data
eye 9
favorite 0
comment 0
Double CO2 Holder for Mountain Bike Now re booted. http://www.thingiverse.com/thing:1010642 This was one of the first 3D models I made, since then I've had a lot of practice and moved away from sketch up to some more serious software. Sorry to those that struggled with the the original file.
Topics: thingiverse, bottle holder, stl, CO2, Other
4
4.0
Mar 3, 2021
03/21
by
Peter Fitzpatrick (MojoBob)
data
eye 4
favorite 0
comment 0
This little receptacle is sized to fit the 17ml dropper bottles used by Vallejo, Reaper and others. My intention is to assemble a whole bunch of them into a combined paint rack and print them all in one go, but I thought I would release the base module into the wild for other people to do with as they will.
Topics: thingiverse, bottle_holder, Art Tools, stl
4
4.0
Mar 8, 2021
03/21
by
Andrei Ta (chomp3rs)
data
eye 4
favorite 0
comment 0
Built this to carry bottles of water to/from lunch. The print photos don't look that nice but it's only because my TPU has absorbed a lot of moisture.
Topics: flexible, stl, thingiverse, bottle_holder, Household
2
2.0
Jan 4, 2021
01/21
by
Jay Ess (Rhythmdvl)
data
eye 2
favorite 0
comment 0
Our SodaStream Slim bottles are great space-wise, but they have a narrow base. Besides being easily tippable in general, we keep them in the fridge door --- so whenever they were full they'd flop about when we opened/shut the fridge for something else. So I made an excruciatingly simple end-cap for them. They fit nice and snugly, but I eventually used Gorilla Glue (gap-filling) to keep them on permanently. Please keep in mind this is only the second thing I have made in Fusion 360; I am just...
Topics: Containers, stl, bottle_holder, thingiverse, Sodastream
2
2.0
Mar 25, 2021
03/21
by
Drew B (guymaker)
data
eye 2
favorite 0
comment 0
Simple wine rack to hold up to 4 wine bottles. 3 files are needed, a left support, a right support, and one of the main bottle holding parts. The file for this main part needs to be printed twice. There are two different version of the main part, one with open tops and one that fully closes off the diamonds. The open version can fit some of the bottles that are slightly wider but the enclosed version is a bit stronger and stiffer.
Topics: stl, thingiverse, Wine_Bottle_Holder, wine, wine_holder, wine_rack, Kitchen & Dining,...
8
8.0
Mar 10, 2021
03/21
by
Fabian (FKOne)
data
eye 8
favorite 0
comment 0
CO2 Bottle Holder ============== This holder is designed to be printed in two pieces to hold a bigger gas or co2 bottle. These bottles can have a diameter up to 110-115 mm and can be fixed to a wall. The holder will prevent the falling. Through the holes its easy to screw the holder to any surface. Both parts click and fit easily into each other. Also though this design it is possible to use this holder in places where you can't vertical insert a co2/gas bottle (eg in a small wall box) - just...
Topics: CO2, stl, thingiverse, bottle_holder, aquarium, DIY
2
2.0
Jan 19, 2021
01/21
by
Lev Ya (Ekvis)
data
eye 2
favorite 0
comment 0
I've made it fo certain bottle from Decathlon but it can hold any of 0.6l plastic bottles. I've used it and it works ))
Topics: Sport & Outdoors, thingiverse, bottle_holder, bike, stl
3
3.0
Apr 11, 2021
04/21
by
Ik Me (Marecoch)
data
eye 3
favorite 0
comment 0
Holds the bottle up so it doesn't drip. Usefull for example in the fridge. Connectable to each other.
Topics: thingiverse, bottle, Kitchen & Dining, bottle_holder, stl
8
8.0
Apr 26, 2021
04/21
by
Nir Dobovizki (NirDobovizki)
data
eye 8
favorite 0
comment 0
My kids just can't go to bed without a small water bottle in can they will be thirsty in the middle of the night, until recently the bottles were place on the floor near the bed - but we just got them a bunk bed and placing the bottle on the floor is no longer an option This model (unlike any of my previous models) is optimized for a 1mm nozzle because it seems like a good model to test my new 1mm nozzle with but it should print just fine with any smaller nozzle size. The part that sits on the...
Topics: thingiverse, bedroom, bottle, stl, bottle_holder, Organization
