6
6.0
Jan 21, 2021
01/21
by
Marc Cometa (mcometa)
data
eye 6
favorite 0
comment 0
"whooPH" cause I am from the Philippines. :) Remixed the 65mm only: - took the best parts, - tapered the ducts (cause they don't add that much value aside from protections, really, in micro kwads), - increased battery holes a bit, (260 mahs don't fit now). - holes ares for M1.4 so stock screws for other micro kwads fit. Use this cam mount: https://www.thingiverse.com/thing:2303204 Remixed of https://www.thingiverse.com/thing:2485556 Tapered Ducts from Shendrone's...
Topics: brushed_quadcopter, 6mm, thingiverse, tiny_whoop, R/C Vehicles, stl, micro_quadcopter
11
11
Jan 10, 2021
01/21
by
(P4man)
data
eye 11
favorite 0
comment 0
Base plate to hold flight controller (like those of QX95) on rolling spider frame. Camera mount that just slips on the front pins. No glue necessary. The single "thread" antenna protector can be mounted or removed like the RS wheels, but the double one is much better. You do need to glue it to the camera holder (beware of CA fumes, they can damage the lens). Cam20 is a camera holder that is tilted 20 degrees. Its also a little bigger, big enough to hold the TX03. Both frame plate and...
Topics: R/C Vehicles, thingiverse, brushed_quad, stl, rolling_spider, qx95, brushed_quadcopter
8
8.0
Apr 17, 2021
04/21
by
Sylvain Grabowski (Sylv77)
data
eye 8
favorite 0
comment 0
I designed those motor grommets to replace the ones on my qx 95, they also double as landing pads and protect the bottom of the motors!
Topics: brushed_quad, brushed_quadcopter, thingiverse, stl, fpv, micro_quadcopter, R/C Vehicles, micro_quad
9
9.0
Jun 20, 2021
06/21
by
Maxence CORBEAU (Crysipe)
data
eye 9
favorite 0
comment 0
This item is a lipo 1s to Xs (with X from 2 to 6) balanced charging plate. It permits to charge lipo 1s in series with a balanced plug (commonly used JST-XH) with a lipo charger. A servo jumper permits to choose the number of lipo in series by placing it at the right place. Be careful : it exists different connector for 1s lipo. I used the micro JST-PH 2.0mm connector. Generally, stock 1s lipos for tiny whoop are selled with JST 1.25mm connector. The Jst 1.25mm may fit with some hot glue. You...
Topics: micro_quadcopter, mini_quadcopter, R/C Vehicles, brushed_fpv, tiny_whoop, thingiverse,...
8
8.0
Jan 17, 2021
01/21
by
Steve king (SWKPapa)
data
eye 8
favorite 0
comment 0
This Simple box holds 12 1S 600mAh Lipo batteries and has room for 65mm Props and 50mm props for 2 of my 1s micro quad-copters
Topics: lipo_case, LIPO_Holder, micro_fpv_quad, brushed_quadcopter, thingiverse, micro_fpv, Hobby,...
3
3.0
Jun 7, 2021
06/21
by
David Palma (Xarhvid)
data
eye 3
favorite 0
comment 0
https://youtu.be/2A1_jQ4sZug + I culdn't find a Frame what is compatible with the cheapest F3 Evo brushed flight controller, so now you can build a cheapest and powerfull Tiniwhoop ever, with 8520 motors and the screw holes are compatible with the standar Tinywhoop canopys. - Print with PLA (I already crash a lot of times and it is still alive) - Low speed printing - Supports at 25% + Recommended props: - Gemfan 1635 Durable Tri-Blade 40mm,...
Topics: fpv_racing, fpv, Tinywhoop, thingiverse, stl, brushed_quad, R/C Vehicles, brushed_quadcopter, 8520,...
8
8.0
Apr 17, 2021
04/21
by
Marcel Welter (marcelwelter)
data
eye 8
favorite 0
comment 0
Indestructible, light, flexible frame with camera and JST-connector mount. There is a hole on the floor to feed the receiver antenna through it.
Topics: brushed_quad, Drones, brushed_quadcopter, thingiverse, Micro_Brushed, stl, fpv, R/C Vehicles,...
9
9.0
Apr 17, 2021
04/21
by
Jd DuMont (jjd64)
data
eye 9
favorite 0
comment 0
I haven't tried printing or using these props yet. Please let me know if you do, and share the results, thanks. These are roughly 52mm 3-blade propellers that [should] fit any motors with a 1mm shaft (i.e. 6mm, 7020, 8520, etc. brushed motors). They should work with basically any brushed motors used on the small (sub 120mm frame) quadcopters. The size of the motor shaft hole is 0.96mm for a (hopefully) snug fit on a 1mm shaft. Files are provided for both clockwise (3-blade_cw.stl) as well as...
Topics: brushed_quad, brushed_quadcopter, Quadcopter, Triblade, thingiverse, brushed_motor, micro_drone,...
8
8.0
Apr 17, 2021
04/21
by
xevox3D (xeVox)
data
eye 8
favorite 0
comment 0
The Xevo100 is a tiny beast build around the "sp-racing F3 evo" flight controller. With about 67g it's very light weight, powerfull and a ton of fun to fly! It's perfect for beginners , since the frame is almost indestructable. You can fly eighter indoors or outdoors , but if you choose to fly indoors take the small triblade props, since the bigger ones are way to strong. If you are new to flying, start learning the basics in Line of Slight flying outdoors, so you get used to the...
Topics: brushed, brushed_quadcopter, diy, xevo, small, aviation, Diydrones, thingiverse, stl, fpv,...
8
8.0
Apr 18, 2021
04/21
by
Manuel Scaccabarozzi (iCe_0)
data
eye 8
favorite 0
comment 0
Snap-on prop guard for QX95 quadcopter frame. Designed for non-fpv flight.
Topics: brushed, brushed_quad, Drones, brushed_quadcopter, eachine_qx90, QX90, thingiverse, brushed_motor,...
10
10.0
Jan 11, 2021
01/21
by
Jd DuMont (jjd64)
data
eye 10
favorite 0
comment 0
I haven't tried printing or using these props yet. Please let me know if you do, and share the results, thanks. These are roughly 52mm 6-blade propellers that [should] fit any motors with a 1mm shaft (i.e. 6mm, 7020, 8520, etc. brushed motors). They should work with basically any brushed motors used on the small (sub 120mm frame) quadcopters. The size of the motor shaft hole is 0.96mm for a (hopefully) snug fit on a 1mm shaft. Files are provided for both clockwise (6-blade_cw.stl) as well as...
Topics: drone, R/C Vehicles, thingiverse, brushed_quad, stl, brushed_motor, hubsan, Quadcopter, Hubsan_x4,...
9
9.0
Jun 10, 2021
06/21
by
Michael Montague (SK-Polymer)
data
eye 9
favorite 0
comment 0
**Also works great for a QX95 replacement frame if you happen to break yours. Let me know if you would like anything modified** I have a TBS Discovery but I'm really not that good of a pilot yet. I get nervous flying the $1000 Discovery in fear of crashing or loosing it. I decided to build a micro quad. I printed a few other frames from here on Thingiverse but in the end I didn't really like them. They were either too heavy or I just didn't like the looks. I found the QX kit online and I really...
Topics: Ladybird, brushed_quadcopter, qx95, mini_drone, quadcopter_frame, thingiverse, diy_drone, drone,...
9
9.0
Jan 13, 2021
01/21
by
Daniel Reuter (DR1986)
data
eye 9
favorite 0
comment 0
My first selfdesigned mini quad, Its designed for 6mm brushed motors, a EACHINE TX02 AIO Cam, a brushed FC 33mmx20mm, like FLF3_EVO and 31mm propellers like those from the E010. 11/09: I´ve added firstindoor_UL, a lighter version, TPU test is running and ABS print will follow for weightmatch
Topics: drone, quad, thingiverse, mini_quadcopter, whoop, acro, stl, R/C Vehicles, fpv_racer, brushed,...
3
3.0
Jan 8, 2021
01/21
by
Justin Barker (ourobelisk)
data
eye 3
favorite 0
comment 0
# Brushed Acrobee Case --- Simple case for a Brushed Acrobee. Not sure if it'll fit any other quads but I couldn't imagine a reason it wouldn't. ## **Remixes are welcome!** I've included the F360 file for this reason, upload it and tag it as a remix so I can see, I might like your design more than my own.
Topics: whoop, tiny_whoop_case, R/C Vehicles, stl, quad, whoop_case, brushed_quad, newbeedrone,...
8
8.0
Jan 19, 2021
01/21
by
Michał Trybus (komar007)
data
eye 8
favorite 0
comment 0
This is a training FPV quadopter I've designed for maximum durability to facilitate painless learning. It's specifically suited for printing with flexible materials. FPV footage: https://youtu.be/jwg5GdMFVk4 Excuse my beginner flying skills. The overall look and shape of the frame was inspired by https://www.thingiverse.com/thing:1221911. Thanks, [punkkills](https://www.thingiverse.com/punkkills) - it was also the first FPV quadcopter I've flown. Unfortunately it was too brittle printed from...
Topics: fpv, FPV_freestyle, Coreless, flexible, Quadcopter, Quadcopter_Frame, drone, R/C Vehicles,...
10
10.0
Jan 12, 2021
01/21
by
Denes Nagymathe (Denes)
data
eye 10
favorite 0
comment 0
I have experimented with designing folding frames before, with questionable success :) This one finally works as i wanted. Designed to fit around the scisky, be robust, and quick and easy to print; and it does the job pretty well. It's light (less than 6 grams), doesn't need any screws, everything snaps together nicely if your printer is properly calibrated. I use a rubber band to hold the battery below the body; the latest version even have grooves to keep the loops nice and even, and protect...
Topics: R/C Vehicles, thingiverse, brushed_quad, drone_frame, folding, stl, folding_drone, Micro_Scisky,...
11
11
Jan 11, 2021
01/21
by
Bernd Andre Gratt (B-A-G-FPV)
data
eye 11
favorite 0
comment 0
Micro Brushed Quad Motormounts = 8,5mm für 7,2V Brushed Motoren 0820 7,2v Motor-diagonale = 100mm FC Aussparung für Brushed F4 FC von Banggo.. Material Bendlay-Flex In diesem Video kann man sehen wie Sauber man mit diesem Frame Fliegen kann https://www.youtube.com/watch?v=3K9GiUphMTc&t=4s
Topics: Bendlay-flex, R/C Vehicles, thingiverse, brushed_quad, X-Quad, FPVLAB, stl, Micro_Brushed,...
9
9.0
Apr 28, 2021
04/21
by
H@ckbert Lee (Hackbert)
data
eye 9
favorite 0
comment 0
Hubsan X4 FPV Racer Frame 110 with LEDs for CL-0820 Brushed Motors Lipos 1s 350mah-600mah 1x Hubsan H107C X4 (electronic) 4x M3 Nylon screws 1x FPV camera FX797T 3-In-1 Super Mini 5.8G 40ch AV Video Transmitter
Topics: fpv_racer, hubsan_fpv, thingiverse, drone, 2 zoll fpv racer, tiny_whoop, drone_racing, brushed,...
10
10.0
Jun 20, 2021
06/21
by
Babouch (Babouch)
data
eye 10
favorite 0
comment 0
This is the mod every Whoop pilot must give a try!... A so simple thing for so better flight caracteristics...First I didn't believe too much in it, but I have to say my Whoop flies way better with this mod... There are some carbonfiber versions on sale, but they are heavy and pop easily when you crash. Printed in ABS or PLA in 0.8mm thikness, it weights almost nothing (just under 0.3 gr) and you definitely don't feel it when you fly, neither your battery... The first version is designed for...
Topics: kingkong 65mm, tiny_6, beta, whoop, brushed_quad, kingkong, R/C Vehicles, tiny_whoop, thingiverse,...
6
6.0
Mar 17, 2021
03/21
by
Laurent Molina (LaurentRueil)
data
eye 6
favorite 0
comment 0
Created to find the optimized neutral weight between Front and rear.
Topics: Quadcopter_Frame, quad, Tinywhoop, E010s, whoop, beebrain, brushed_quadcopter, omnibusF3,...
10
10.0
Jan 11, 2021
01/21
by
CNC Model (cncmodel)
data
eye 10
favorite 0
comment 0
Inspired by OB1 FPV Racer this is my new project. 120mm brushed FPV Racer. More stable than 90mm. Flight control with receiver: https://goo.gl/aoGdbV Suggested Motors: https://goo.gl/kKymxV AIO Camera: https://goo.gl/8JVVpf Triblades propellers: https://goo.gl/x9L6fI Lipo 1S: https://goo.gl/p124HN See video https://youtu.be/V71vvZw4qY4 The model in the video is the first version. After the video I made some improvements on STL files
Topics: QX100, brushed_motor, brushed, fpv_racer, Quadcopter, fpv, micro_quadcopter, thingiverse, 1S_LIPO,...
6
6.0
Mar 17, 2021
03/21
by
Laurent Molina (LaurentRueil)
data
eye 6
favorite 0
comment 0
Made for white frame from banggood https://www.banggood.com/fr/Eachine-E010S-E010C-E010-Micro-FPV-RC-Quadcopter-Spare-Parts-Frame-Kit-p-1126510.html?rmmds=search&cur_warehouse=CN Better than X-Cross Anti-broken frame. Very light!
Topics: fpv, Tinywhoop, E010s, beebrain, brushed_quadcopter, omnibusF3, Blade_Inductrix, BeeBrain_V2,...
6
6.0
Mar 17, 2021
03/21
by
Karamvir Bhagat (Karamvir_Bhagat)
data
eye 6
favorite 0
comment 0
**X-26 Evo: Brushed Micro Racing & Freestyle Quadcopter Drone & Tiny Whoop Conversion Frame** **Tips & Design Appreciation:** If you enjoy using my designs I would really appreciate it of you could please kindly take a minute to show your appreciation with a small "tip". Your contributions can assist in filament and parts purchases that can help me to design and make better multi-rotors frames. So if you can show your appreciation with a tip or a share, it would be...
Topics: Quadcopter_Frame, racing_drone, fpv, Tinywhoop, furibee_f36, fpv_racing, brushed_quadcopter,...
6
6.0
Mar 17, 2021
03/21
by
Karamvir Bhagat (Karamvir_Bhagat)
data
eye 6
favorite 0
comment 0
**X-26 Evo Lite: Brushed Micro Racing & Freestyle Quadcopter Drone & Tiny Whoop Conversion Frame** **Tips & Design Appreciation:** If you enjoy using my designs I would really appreciate it of you could please kindly take a minute to show your appreciation with a small "tip". Your contributions can assist in filament and parts purchases that can help me to design and make better multi-rotors frames. So if you can show your appreciation with a tip or a share, it would be...
Topics: Quadcopter_Frame, racing_drone, quad, fpv, Tinywhoop, whoop, brushed_fpv, fpv_racing,...