8
8.0
Jan 12, 2021
01/21
by
Zubrycki Igor (AdoHaha)
data
eye 8
favorite 0
comment 0
Super simple cable clip, to connect 3 USB (or similar diameter) cables together. Prints in less than 5 minutes.
Topics: USB_cable_clip, cable_clip, thingiverse, stl, Organization
1
1.0
Sep 13, 2021
09/21
by
Ben Sidebottom (bsidebottom)
data
eye 1
favorite 0
comment 0
Simple ribbon cable clip (15mm) I designed for my screen cable. Can slide cables in and out of it with the small cut out. Small screw needed to secure to whatever it is you need your cables securing to
Topics: stl, thingiverse, 3D Printer Accessories, Ribbon_Cable_clip, cable_clip
2
2.0
Jan 7, 2021
01/21
by
Stephen Miles (Stevie135s)
data
eye 2
favorite 0
comment 0
Lockable cable clip. I wanted to run a wire along the side of a PVC door without making nail holes and designed this. I used superglue to attach the clips, double sided sticky pads can be used but i found the heat of the sun would unstick them. The stl is scalable to suit the cable size : the set size is 5.5mm wide x 4mm high. Made from PETG to resist uv. Use M2 x 8mm screws
Topics: stl, Lockable cable clip, wire_holder, thingiverse, Electronics, cable_clip
8
8.0
Mar 18, 2021
03/21
by
Venky Raju (venky_r)
data
eye 8
favorite 0
comment 0
A simple clip to secure your smartphone, laptop and other USB cables. Simply loop the cable and insert into the clip. Secure the cable to the clip by pushing the ends into the diametrically opposite grooves. One set of grooves is designed for common USB cable thicknesses while the other is slightly larger and can accommodate laptop power cords.
Topics: USB_cable_clip, cable_management, cable_clip, thingiverse, Organization, stl
6
6.0
Apr 17, 2021
04/21
by
Aleksander Rødland (Aleksandermr)
data
eye 6
favorite 0
comment 0
A simple cable clip for headphones with flat cable. Flat cables are prone to causing a lot of noise when it scrapes against zippers and such, so this cable clip will help reduce that noice (and also keep the cable in place). Attach clip to cable, and fasten it to your clothes (t-shirt, jacket, etc.)
Topics: Flat_cable_clip, headphone_cable, thingiverse, stl, Audio, cable_clip
7
7.0
Apr 17, 2021
04/21
by
Krzywy (YlooC)
data
eye 7
favorite 0
comment 0
This is a simple double cable clip. For any use, where spearation between cables is needed. Designed for 5mm dia cables, and suited for M3 screws with 5mm head.
Topics: double, thingiverse, 5mm cable clip, stl, clip, double cable clip, cable, double clip, cable clip,...
6
6.0
Jan 15, 2021
01/21
by
Jonathan Mackey (JMadison)
data
eye 6
favorite 0
comment 0
Used to secure two 10 conductor flat cables. Uses a single M3 flathead screw. Print without support
Topics: ultimaker2, cable_clip, thingiverse, ultimaker, stl, 3D Printer Parts, Flat_cable_clip
8
8.0
Jan 14, 2021
01/21
by
Jörg Blaschke (groing)
data
eye 8
favorite 0
comment 0
Ein besonderer clip, mit dem ich Kabel 90 Grad um die Ecke verlegen kann.Kabeldurchmesser 5 mm = Cat 5e A special clip with which I can cable 90 degrees around the corner.Cable diameter 5 mm = Cat 5e
Topics: cable_clip, thingiverse, Organization, stl
8
8.0
Jan 12, 2021
01/21
by
James Young (Huan91)
data
eye 8
favorite 0
comment 0
A quick remix of Dhatw's cable clip in order to be large enough to hold a 26 way ribbon cable (33mm). Dhatw's design prints well and holds a 20 way cable so i simply lengthened it and changed nothing else. Will need to be pried open with finger nails or scraper after printing.
Topics: cable_clip, thingiverse, ribbon_cable, stl, 3D Printer Parts, Ribbon_Cable_clip
3
3.0
Mar 9, 2021
03/21
by
Katsumi Kishikawa (kishikawakatsumi)
data
eye 3
favorite 0
comment 0
Cable clips
Topics: stl, thingiverse, cable_clip, Organization
6
6.0
Apr 17, 2021
04/21
by
Peter Flechs (peter77)
data
eye 6
favorite 0
comment 0
Cable clip for XLR cables to fix them on mic stand. The model is a parametric model, constructed with FreeCAD.
Topics: Music, thingiverse, cable_clip, stl
8
8.0
Apr 30, 2021
04/21
by
Walter Hsiao (walter)
data
eye 8
favorite 0
comment 0
This is a copy of a clip that Colorfabb uses to secure their filament samples, available in a few different sizes. If you want other sizes, you can customize your own in [Onshape](https://cad.onshape.com/documents/878872f8e606191f9f3dbee7/w/65aebf5bc56c9394da304564/e/9a304da8c6a790851d613978). **Printer:** [Eustathios](http://thrinter.com/eustathios-initial-build/) **Filaments:** -- [MadeSolid Red PET+](http://thrinter.com/walters-filament-collection-petg/#solid-red) -- [Atomic Filament Orange...
Topics: stl, thingiverse, Organization, cable clip
7
7.0
Jan 3, 2021
01/21
by
Peter Flechs (peter77)
data
eye 7
favorite 0
comment 0
Better an simpler version of Cable Marker with Imprint. It's holding together by sliding both parts into each other. This model is an parametric design with FreeCAD. You can find the file attached here.
Topics: cable_clip, Music, stl, thingiverse
0
0.0
Apr 20, 2022
04/22
by
Mikiya KOBAYASHI (mikiya418)
data
eye 0
favorite 0
comment 0
mic cable clips for boom arm (cable:5 mm, arm:10*10 mm)
Topics: Audio, cable_clip, stl, thingiverse
2
2.0
Mar 19, 2021
03/21
by
Kunitake Aoki (Kexei)
data
eye 2
favorite 0
comment 0
Small cable cap to prevent from bending
Topics: Parts, thingiverse, cable_clip, stl
1
1.0
Dec 14, 2021
12/21
by
Thomas Derwael (Derwt83)
data
eye 1
favorite 0
comment 0
cable clip to keep Christmas lights in place on the window.
Topics: cable_clip, Parts, stl, thingiverse
6
6.0
Jan 18, 2021
01/21
by
Peter Flechs (peter77)
data
eye 6
favorite 0
comment 0
Clip modeled to mark cables with their length or something else. e.g. the matching connection on your mixer. The clip can be secured against unwanted opening with cable ties in both ends. This model is an parametric design with FreeCAD. You can find the file attached here.
Topics: Music, stl, cable_clip, thingiverse
1
1.0
Jan 19, 2022
01/22
by
Bosse Andersson (bossebus)
data
eye 1
favorite 0
comment 0
Easy to resice in slicer. Easy to attach with double-sided adhesive tape.
Topics: stl, thingiverse, Organization, cable_clip
3
3.0
Mar 15, 2021
03/21
by
Eduardo Gomes (edugomes)
data
eye 3
favorite 0
comment 0
Just put together backplate and base.
Topics: stl, DIY, thingiverse, cable_clip
6
6.0
Jan 17, 2021
01/21
by
Daniel Gore (cantankerousjoe)
data
eye 6
favorite 0
comment 0
Designed for a 4mm cable. Wide base for velcro or double-sided tape.
Topics: Computer, stl, cable_clip, thingiverse
2
2.0
Mar 31, 2021
03/21
by
Gladius Illuminatus (Gladius_Illuminatus)
data
eye 2
favorite 0
comment 0
Since I like to wear my bluetooth headphones around the neck and often only use one I needed some system to keep them in place. This simple clip can be put on the cable and used to hold it wherever its needs to be.
Topics: Audio, cable_clip, stl, thingiverse
2
2.0
Apr 17, 2021
04/21
by
itay L (itayl)
data
eye 2
favorite 0
comment 0
print time: 1 minute
Topics: Organization, thingiverse, cable_clip, stl
6
6.0
Jan 16, 2021
01/21
by
Alexander Pruss (arpruss)
data
eye 6
favorite 0
comment 0
This is a simple customizable cable clip. This uses and bundles my [Bezier library](https://www.thingiverse.com/thing:2207518).
Topics: Electronics, stl, cable_clip, thingiverse
4
4.0
Mar 17, 2021
03/21
by
Sterling Hanenkamp (zostay)
data
eye 4
favorite 0
comment 0
I got tired of the charging cable for my phone falling off so I made this thing. If you use Fusion 360 and get the .f3d file, you can go into Modify > Change Parameters and adjust the TableThickness and the CableDiameter to suit your needs and this should mostly work for just about anything, right. That's the theory at least.
Topics: stl, Office, cable_clip, thingiverse
2
2.0
Mar 19, 2021
03/21
by
Petr Cizmar (strec)
data
eye 2
favorite 0
comment 0
Topics: Organization, thingiverse, cable_clip, stl
0
0.0
Apr 20, 2022
04/22
by
Şükrü Uprak (suprak)
data
eye 0
favorite 0
comment 0
cable holder for bluetooth earphones
Topics: cable_clip, stl, Accessories, thingiverse
2
2.0
Jan 5, 2021
01/21
by
Ralph (x12a1f)
data
eye 2
favorite 0
comment 0
Library for adding cable clamps to your project. Stand alone, the library is not very useful as it lacks a way of mounting the clamps. This needs to be added externally. See cableclamp_usage.scad for an example. See [cable clamps](https://github.com/x12a1f/rol/blob/master/doc/cableclamp.md) on github for more information on how to use and customize the clamps.
Topics: cable_clip, Electronics, stl, thingiverse
6
6.0
Jan 15, 2021
01/21
by
Steven Marcus (smarcus3)
data
eye 6
favorite 0
comment 0
This is a ribbon clip which is attached using 2 sided adhesive tape. Works great. The design allows it to flex open and holds the ribbon tightly. If you require customization please let me know and I'll be glad to assist.
Topics: cable_clip, thingiverse, stl, 3D Printer Accessories, clip, organization, cable_management,...
4
4.0
Mar 5, 2021
03/21
by
Kanad Nemade (Kanad)
data
eye 4
favorite 0
comment 0
Basic Clip for Cable Management of Ribbon Cable of LCD Display. I have fixed my display on the upper part of the printer. However, it will work with any cable of the same width, whether fixed or free. 90° angle clip coming soon.
Topics: stl, cable_clip, Ribbon_Cable_clip, ribbon_cable, lcd, 3D Printer Parts, Clip, thingiverse
5
5.0
Mar 2, 2021
03/21
by
Jan Liciński (YasiekPL)
data
eye 5
favorite 0
comment 0
Phone charging cable mini clip. Cable diam. 4,5 mm
Topics: small clip, car, thingiverse, cable, stl, Mobile Phone, smal cable clip, cable clip, clip
2
2.0
Oct 26, 2021
10/21
by
ScottieD369 (ScottieD369)
data
eye 2
favorite 0
comment 0
For mounting Cat 5E or similar cable to a surface. This is a screw in type provide your own hardware. Give a solid hold on any communication cable! Can be used indoor/outdoor any surface. Got long runs of wire with big loops? Add one of these clips every 3ft is the rule. Or use as a guide for wire that's looped up in a tight spot. Print 50 and put in a small clear box. Your good to go! ***PLEASE NOTE*** NOT ALL CABLE ARE THE SAME SIZE DIAMETER! VARY FROM MANUFACTURE! ALSO PLEASE CLEAN YOUR...
Topics: telecom cable clip, telecommunications, twisted wire clip, thingiverse, twisted pair, cat6 cable,...
10
10.0
Jan 10, 2021
01/21
by
alexander c. (alexdesigns)
data
eye 10
favorite 0
comment 0
hi, this is a little cable management clip, there is a small percentage of monitor creators wich give this clip in the box, for the high percentage, here just download and print. printer settings: infill 100% quality, medium is good rest doesn't matter help is always welcome, if you think you know how i could make this clip even better, just tell me. if you want another model, just tell me. i'll make it.
Topics: cable_clip, thingiverse, cable, stl, Computer, monitor cable clip, cable_holder, cable_management,...
2
2.0
Jan 16, 2021
01/21
by
Jeremy Paquette (jjpaq)
data
eye 2
favorite 0
comment 0
Designed to be printed on its back, use a brim if you have trouble with bed adhesion. This one is resized to fit the ribbon cable of a Raspberry Pi camera, per Slapping_Plastic's request.
Topics: 3D Printer Accessories, stl, thingiverse, Ribbon_Cable_clip, raspberry_pi_camera, Cable, cable_clip
4
4.0
May 1, 2021
05/21
by
None None (oglind_5399)
data
eye 4
favorite 0
comment 0
An easy to print cable holder/management design. Holds cables up to 5mm diameter. can be used in a few ways, either with an M3x5.7mm threaded insert and a double sided adhesive on the back to stick it down. Or because the base of the insert hole is thin, you could use it as a normal cable clip and put a screw straight through to secure it. Great for things like networking cables or USB cables and can be used pretty much anywhere No supports/rafts/brim required
Topics: stl, cable_clip, cable_holder, network_cable_clip, usb_cable, cable_management, Organization,...
2
2.0
Apr 13, 2021
04/21
by
Marcus Mikulcak (mikulcak)
data
eye 2
favorite 0
comment 0
Clip to attach round cables (USB cables, etc.) to the frame of an Ender 3.
Topics: thingiverse, 3D Printer Accessories, Creality, USB_cable_clip, Ender_3, stl, cable, cable_clip
3
3.0
Mar 19, 2021
03/21
by
James A (DiyProJames)
data
eye 3
favorite 0
comment 0
CR10s pro cable clips used when mounting my bltouch 3.1. Check out my video here. https://youtu.be/iJjqOUlZHUw
Topics: cable clip, cr10s pro cable clip, thingiverse, cr10s pro cable, 3D Printer Accessories, stl
3
3.0
Mar 20, 2021
03/21
by
Martijn de Bont (bonm014)
data
eye 3
favorite 0
comment 0
Define your own size of the cable clip and mount it to a flat surface
Topics: stl, customizer, cable_clip, thingiverse, Other
5
5.0
Jan 21, 2021
01/21
by
Harry Hirsch (Harry)
data
eye 5
favorite 0
comment 0
Ein grosser Clip zur Aufnahme von 8 Kabeln. kann man gut mit PowerStrips an die Wand kleben und die Kable dort befestigen. Den Clip von unten nach oben ankeben, dann kann man die Kabel auf dem Deckel ablegen.
Topics: Organization, thingiverse, Kabel, stl, cable_clip
7
7.0
Jan 13, 2021
01/21
by
Chriss Prokupek (kpr)
data
eye 7
favorite 0
comment 0
Clip for worktables and workbenches. Designed for 25mm thick desks. Cable is hold from side.
Topics: cable_clip, thingiverse, stl, table, Organization
3
3.0
Mar 5, 2021
03/21
by
Victor Volkov (kapacb100500)
data
eye 3
favorite 0
comment 0
Table wire clip
Topics: stl, cable_clip, Organization, clips, thingiverse
8
8.0
Apr 2, 2021
04/21
by
(guru)
data
eye 8
favorite 0
comment 0
I made a cable holder that can be clipped onto my desk
Topics: cable_clip, thingiverse, useful, Organization, stl
3
3.0
Apr 16, 2021
04/21
by
Martin Gertsen (Gertsen)
data
eye 3
favorite 0
comment 0
A friend needed a simple way to keep a cable in place, so we designed this clip to snap into two RCA connectors. Though the model is upright, I recommend printing it on the side like shown in the picture. We printed 8 of theese, and they worked directly out of the printer, no post-print cleanup required. When we printed it standing up, like in the model, the quality was MUCH lower, and strength was very poor. Also it would have required ALOT of cleaning up with a knife or sanding it, not worth...
Topics: thingiverse, RCA, stl, Music, cable_clip
1
1.0
Dec 14, 2021
12/21
by
Doctor Evil (Wiggis)
data
eye 1
favorite 0
comment 0
This is a replacement cable clip, intended to hold the cable to the cable reel on those long extension cords, to keep them tidy in storage. They're often lost or broken, and it seems almost impossible to buy spares. Print laying flat, with 100% infill and 2mm side walls for strength. No need for supports or rafts or anything clever. Takes about 15 minutes to print on an Ender 5. OK with PLA but stronger with PETG.
Topics: cable_clip, stl, Replacement Parts, thingiverse
3
3.0
Apr 13, 2021
04/21
by
Marco Binz (znib)
data
eye 3
favorite 0
comment 0
To hold the end of the cable on my cable roll
Topics: thingiverse, stl, cable_clip, Replacement Parts
6
6.0
Jan 18, 2021
01/21
by
Gilad Levy (CrudePlatypus54)
data
eye 6
favorite 0
comment 0
a cable clip!!!!
Topics: clip, thingiverse, Tools, stl, cable_clip
6
6.0
Mar 9, 2021
03/21
by
Zbyszek (Szwerthalter)
data
eye 6
favorite 0
comment 0
Uchwyt do kabli możliwość przykręcenia do otworów vesa. pozwala ułożyć przewody monitora / telewizora
Topics: Electronics, vesa, stl, thingiverse, cable clip
4
4.0
Jun 11, 2021
06/21
by
(Tiim_)
data
eye 4
favorite 0
comment 0
Summary Cable management clip I designed to fit my desk. Has a hook on the bottom that fits many cables and is quite strong. This clip is specifically designed for my desk so it might not work on yours :/ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 2 Infill: 20 Filament: TIANSE PLA Blue
Topics: thingiverse, cable_clip, cable_management, stl
2
2.0
Apr 27, 2021
04/21
by
Scott Pearce (beeblebrox666)
data
eye 2
favorite 0
comment 0
Liked the original idea...saw need for clip for ribbon cables hanging in the breeze...
Topics: 3D Printing, stl, thingiverse, cable_clip
8
8.0
Jan 10, 2021
01/21
by
(Wiles)
data
eye 8
favorite 0
comment 0
Cable clip for Modmic v2 (1.5mm cable). Designed to work with headphones with a 3.5mm cable (Sennheiser HD 598).
Topics: cable_clip, thingiverse, stl, Audio, ModMic
5
5.0
Mar 17, 2021
03/21
by
Larry Williams (historyhunters2)
data
eye 5
favorite 0
comment 0
A simple clip to hold the cable for the extruder away from the bed as it goes back and forth. You can slide the clip closer to the Z Axis Motor if it looks like the cable will be tight on tall prints. Not sure if this is a remix but will post it anyway as one. I got the slides from this Source: Cable Holder for 4040 Aluprofiles by: PRIma, they are the best I've found.
Topics: ender 3 pro, ender 3, cable clip, 3D Printer Accessories, stl, thingiverse, extruder cable clip
