2
2.0
Aug 9, 2021
08/21
by
Rafal Olechowski (Majszter)
data
eye 2
favorite 0
comment 0
CADDX Vista antenna mount for any copter with m3 standoffs. This version is longer then original
Topics: thingiverse, caddx_vista_antenna, vtx_antenna_holder, R/C Vehicles, stl, antenna_mount,...
3
3.0
Mar 13, 2021
03/21
by
Max Muster (maex)
data
eye 3
favorite 0
comment 0
A little spacer for mounting the caddx vista camera (wich is about 20mm wide) in my Transtec Frog Frame (28 mm wide sides). Spacer is first screwed to the cam with the included M2 screws. Then mounted in the quad using some additional short (
Topics: thingiverse, dji_fpv_caddx_vista, R/C Vehicles, Transtec_frog, caddx_vista, stl
3
3.0
Mar 19, 2021
03/21
by
Orell Kreier (ecoprinter)
data
eye 3
favorite 0
comment 0
This is a mount for a caddx vista on a toothpick (in my case the frame is a Diatone cube 339). its designed to fit the caddx vista on top of a Betafpv AIO 12A (everything with a 25x25 mount works) I recommend milling the M2 adapter from Aluminium. it works fine if print it with PETG but the durability on a crash is not very good.
Topics: R/C Vehicles, caddx_vista, dji_fpv_caddx_vista, thingiverse, HD_video, toothpick, stl
2
2.0
Mar 5, 2021
03/21
by
blandin thierry (tweety_fpv)
data
eye 2
favorite 0
comment 0
Canopy légèrement modifié pour accepter le caddx vista
Topics: Other, stl, caddx_vista, thingiverse
3
3.0
Jun 11, 2021
06/21
by
Matthias (darken)
data
eye 3
favorite 0
comment 0
For 4mm standoffs. Works well for my FlexRC Skyhopper.
Topics: skyhopper, caddx_vista, flexrc, caddx_vista_antenna, thingiverse, FPV_Antenna_mount, R/C Vehicles,...
4
4.0
Mar 16, 2021
03/21
by
Matteo Schenetti (Skenna27)
data
eye 4
favorite 0
comment 0
Made it for my TBS source one V3
Topics: thingiverse, caddx_vista, TPU, tbs_source_one_v3, 3D Printer Parts, stl, caddx_vista_antenna
3
3.0
Jun 12, 2021
06/21
by
Mark Harris (Mrh1376)
data
eye 3
favorite 0
comment 0
Print Settings: 4 to 5 Walls 4 Top 4 Bottom 20 % infill Enjoy !
Topics: thingiverse, R/C Vehicles, caddx_vista, stl
5
5.0
Jan 8, 2021
01/21
by
Alexander Nilsen (al3k87)
data
eye 5
favorite 0
comment 0
caddx antenna mount 20mm
Topics: R/C Vehicles, thingiverse, caddx_vista, stl
4
4.0
Mar 21, 2021
03/21
by
(maramau)
data
eye 4
favorite 0
comment 0
3mm high spacer with underneath wire "cavity" (2x10mm), yes the file it's flipped upside down for print ease
Topics: caddx_vista, thingiverse, stl, R/C Vehicles
2
2.0
Sep 13, 2021
09/21
by
Holger Rusch (profdryoman)
data
eye 2
favorite 0
comment 0
Simple side protection for the caddx vista with 30.5 mm spacing. You need to cut M3 thread and mount with nylon screws (M3 x 18) or drill it bigger for M3 to pass thru (M3 x 20 with nuts). The picture shows the first try with M3 metal pass thru. As soon as the nylon screws are here I will add another picture. Fusion 360: https://a360.co/3mADRdE
Topics: R/C Vehicles, stl, thingiverse, caddx_vista
3
3.0
Jun 11, 2021
06/21
by
Munky FPV (MUNKY_FPV)
data
eye 3
favorite 0
comment 0
Remix of a vista antenna mount by FlyHighFPV for the standard Apex frame (non-HD version) Here's what I've changed: 1. longer tube section (the ufl connector only just reaches the vista if it's mounted in the rear of the Apex frame. 2. tweaked the area that fits into the top plate cut-out so it fits the standard Apex frame without any cutting. 3. Removed material from the back and made a different Immortal-T antenna holder. I printed with 20% infill and supports which seems to work well.
Topics: caddx_vista, immortal_t_mount, ImpulseRC_Apex, caddx_vista_antenna, ImpulseRC, thingiverse, apex,...
3
3.0
Mar 19, 2021
03/21
by
Dominik Amrein (sinonis)
data
eye 3
favorite 0
comment 0
This is a 3D model of the Caddx vista to design things around it. This item is featured from https://grabcad.com/library/caddx-vista-1 and translated to stl.
Topics: CADDX, vista, caddx_vista, Hobby, thingiverse, stl
4
4.0
Jun 11, 2021
06/21
by
Gediminas Siutilas (gadominas)
data
eye 4
favorite 0
comment 0
Caddx antena holder for APEX frame.
Topics: Electronics, caddx_vista, fpv, thingiverse, CADDX, apex, stl
3
3.0
Mar 5, 2021
03/21
by
(maramau)
data
eye 3
favorite 0
comment 0
I have a very tight build where I assumed the wrong esc dimension but luckily there was enough space at FC height so i designed a riser that sits on soft mounting grommets, added a holder for rx and a sort of doughnut where i could route the vista cable and keep it safe
Topics: R/C Vehicles, stl, caddx_vista, 20x20, thingiverse
4
4.0
Jan 6, 2021
01/21
by
carlton bennett (funKdat_FPV)
data
eye 4
favorite 0
comment 0
This is a remix of two other designs. I wanted a Caddx Vista antenna mount, but also something that could hold it in place. When I remixed this in Tinkercad I didn't realize that the cage portion was for the non HD frame. BUT, it actually worked out afterward. The cage is short, so you will need to pull the print up to the standoff near the FC to get it to fit. I put the Vista in and it didn't move in the cage. It doesn't fit snug as the original design, but I think it should work fine, just...
Topics: stl, dji, caddx, thingiverse, fpv, caddx_vista, DIY
3
3.0
Oct 15, 2021
10/21
by
Y Kisssy (Kisssy)
data
eye 3
favorite 0
comment 0
ImpulseRC Apex HD Caddx Polar antena Mount 15mm Freestyle 25mm Long Range https://www.youtube.com/watch?v=sr8jgcXjZxQ&t=87s
Topics: thingiverse, stl, caddx_vista, 3D Printing, ImpulseRC_Apex
2
2.0
Jul 22, 2021
07/21
by
Felipe Nogaroto Gonzalez (MadVulture)
data
eye 2
favorite 0
comment 0
Caddx Vista Antenna
Topics: caddx_vista, stl, R/C Vehicles, antenna, thingiverse
2
2.0
Oct 29, 2021
10/21
by
T G (TAGE_FPV)
data
eye 2
favorite 0
comment 0
design for GRL FPV PRO 2 Really simple gasket for caddex vista to mount to reduce vibration and provide spacing for heat dissipation. Print in TPU, in your perfered hardness. Frame: https://gravitylossfpv.com/GRL-FPV-PRO-2-TITANIUM-Freestyle-Frame-5-p385396949 Links: https://linktr.ee/tage_fpv
Topics: thingiverse, caddx_vista, R/C Vehicles, stl, djifpv
3
3.0
Apr 27, 2021
04/21
by
Greg Siegfried (medistix)
data
eye 3
favorite 0
comment 0
This is a mount for the Caddx Vista on the Tricopter LR by David Windestål from: https://rcexplorer.se/ This has not been printed yet, but designed to fit in CAD. Can use 15mm M3 smooth standoffs to mount to the top plate. M2 or M2.5 screws can be used to mount with 20x20 stack holes.
Topics: thingiverse, tricopter, stl, R/C Vehicles, caddx_vista
3
3.0
Jan 19, 2021
01/21
by
Philippe Humeau (kameo4242)
data
eye 3
favorite 0
comment 0
Initially designed for a Reverb frame. You can remix it to adapt it to your frame size/shape, the Fusion 360 source file is included. Print upside down to have the largest surface sticking to your bed. Print the Tube aside. No support needed. It would be smart to print it in TPU rather than PETG but both would work. Anyway, it you break it, just print it again.
Topics: CADDX, thingiverse, caddx_vista, R/C Vehicles, stl
3
3.0
Jan 6, 2021
01/21
by
Dane Hantz (SurfVulcan)
data
eye 3
favorite 0
comment 0
Simple antenna mount for the stock Caddx vista antenna. Gives greater vertical height for the stock antenna for improved range (important if your running a top mount battery)
Topics: R/C Vehicles, stl, dji, thingiverse, caddx_vista
3
3.0
May 1, 2021
05/21
by
Pawel Spychalski (DzikuVx)
data
eye 3
favorite 0
comment 0
Print with TPU filament and glue the Caddx Vista antenna tube in
Topics: stl, Pirx5, thingiverse, R/C Vehicles, caddx_vista
3
3.0
Apr 13, 2021
04/21
by
pierre-Louis Esclattier (Peloow)
data
eye 3
favorite 0
comment 0
V0.1 Mout it on top of the FC 30,5 x 30,5
Topics: thingiverse, caddx_vista, piratframes, stl, drone, R/C Vehicles
5
5.0
Apr 27, 2021
04/21
by
Yilmaz Akarsu (tripcode)
data
eye 5
favorite 0
comment 0
Protective Armattan SCX200 frame extension for the CaddX Camera Unit. Can be printed with ABS filament (strong material).
Topics: thingiverse, scx200, stl, CADDX, 3D Printing, Quadcopter, caddx_vista
3
3.0
Apr 8, 2021
04/21
by
Yonnatan Villa (Yonnatan)
data
eye 3
favorite 0
comment 0
este es mi turtle modificado, aleta 48mm y case de antena para caddx vista...
Topics: Singularitum, 3D Printing, dji_fpv, stl, thingiverse, caddx_vista
2
2.0
Sep 13, 2021
09/21
by
Umbrella FPV (UFPV)
data
eye 2
favorite 0
comment 0
Part for Caddx Nano camera lens protector from Umbrella FPV. For test/education purposes only. Always use original parts. Material: TPU. Best way to support me, watch and subscribe This TPU youtube review: https://youtu.be/I3dPNjb4q0I Please subscribe https://www.youtube.com/channel/UCK2b8-lj6hRAZysOzIXr0gA/videos
Topics: stl, thingiverse, Toys & Games, caddx_nebula_nano, caddx_vista
4
4.0
Mar 15, 2021
03/21
by
(K_thod_v2)
data
eye 4
favorite 0
comment 0
no room left behind
Topics: thingiverse, caddx_vista, armattan_tadpole, R/C Vehicles, stl
2
2.0
Jul 25, 2021
07/21
by
jake ruebel (ladies-man_217)
data
eye 2
favorite 0
comment 0
Squirt v2 vertical vista mount
Topics: thingiverse, Shendrones_Squirt, Shendrones, stl, 3D Printing, caddx_vista
2
2.0
Apr 20, 2022
04/22
by
Kenny TAK (Kennytak)
data
eye 2
favorite 0
comment 0
A support for Crossfire Nano RX to put on top on a Caddx Vista. 20x20mm. Use M2x20mm to screw it on top. No bolt needed.
Topics: thingiverse, caddx_vista, crossfire, nanorx, R/C Vehicles, stl
1
1.0
Apr 20, 2022
04/22
by
Олег Штырев (olegshtyr)
data
eye 1
favorite 0
comment 0
Didn't wanted to cut this foam to install dji FPV, so i just deisgned this canopy
Topics: dji, fpv, thingiverse, caddx_vista, Hobby, FunCub, stl, canopy
4
4.0
Jan 6, 2021
01/21
by
Dane Hantz (SurfVulcan)
data
eye 4
favorite 0
comment 0
Simple antenna mount for the Caddx Vista/Nebula stock antenna. Allows mounting the stock antenna onto a typical 4mm OD standoff. Designed with a 20 degree lean/misalignment tilting the antenna rearward slightly.
Topics: R/C Vehicles, caddx_nebula, stl, thingiverse, caddx_vista
5
5.0
Jan 16, 2021
01/21
by
Paul Wieland (PaulWieland)
data
eye 5
favorite 0
comment 0
Caddx Vista mount for the Strix Goblin. This mounts the camera in the nose of the fuselage, and has a holder for the antenna. Features: - Two mounting methods: right side up or upside down. This allows you to choose whether the antenna sits inside the fuselage thus prioritizing aerodynamics or whether you want the antenna to poke out of the top of the fuselage which is better for range. - Slots for the DJI camera allow you to tilt the camera, and/or move the camera forward or aft in case the...
Topics: thingiverse, caddx_vista, R/C Vehicles, Strix_Goblin, stl
4
4.0
Mar 15, 2021
03/21
by
JR (JTR1)
data
eye 4
favorite 0
comment 0
The size of the Caddx Vista is always problematic with 30X30 mount. I have found other mount but all of them raise a lot the height. So I decided to slightly rotate the vista to allow the 30X30 pattern to pass. You can secure it with 2 nylon ou steel M2 screws. It should work with most of the 5" builds
Topics: thingiverse, 30x30, caddx_vista, CADDX, R/C Vehicles, stl
1
1.0
Apr 19, 2022
04/22
by
Leif Nilsson (3dxspin)
data
eye 1
favorite 0
comment 0
Hey, This is bundle release of a few TPU parts I have designed for my Apex Micro frame (intended to be printed with TPU filaments with a hardness of around 95A e.g. Ninjatek Cheetah). 1) GPS Mount Designed for 18x18x6 mm GPS Module such as the Goku GM8 2) Caddx Vista antenna mount Designed for Caddx Polar Vista Mini Antenna (pole diameter ~ 3mm). The diameter of the hole is 3.7 mm to allow passage of the UFL connector. Thus, antenna pole need some additional layer of tape to make a snug fit 3)...
Topics: thingiverse, Vista antenna, Caddx Vista, motor protection, arm protection, GPS mount, Apex Micro,...
4
4.0
Mar 15, 2021
03/21
by
Ronny Welter (RonnyKingFPV)
data
eye 4
favorite 0
comment 0
This is an antenna mount for the Caddx Vista stock antenna on the the Lumenier Johnny FPV QAV-S Special Edition frame. The TPU around the lead of the antenna is fairly thin. In crashes this could cause small rips. Hence why I added additional zipties around them to makes sure the antenna inside stays in place. The head of the antenna fits nicely into the cup. Snug fit. Should suffice.
Topics: thingiverse, caddx_vista, CADDX, FPV_Antenna_mount, johnnyfpv_qav_s, johnnyfpv, R/C Vehicles, fpv,...
3
3.0
May 1, 2021
05/21
by
Nicolas Udy (udyux)
data
eye 3
favorite 0
comment 0
## ImpulseRC Apex HD Caddx Vista Antenna mount **Only fits Apex HD rear standoffs**
Topics: stl, caddx_vista_antenna, apex_hd, apex, ImpulseRC_Apex, impulserc_apex_hd, vista, fpv,...
4
4.0
Jan 6, 2021
01/21
by
JEREMY SPATRISANO (SPAT_FPV)
data
eye 4
favorite 0
comment 0
Rear mount for the Cricket MoonGoat that will hold a Caddx Vista antenna and TBS Crossfire Immortal T antenna. I did 100% infill with Sainsmart TPU and turns out nice.
Topics: 3D Printing, antenna mount, stl, caddx vista, dji caddx vista, cricket, dji, antenna, caddx,...
4
4.0
Jan 5, 2021
01/21
by
Kris Labs (krislabs)
data
eye 4
favorite 0
comment 0
GEPRC Thinking P16 HD RUSH antenna adapter 45° angle Print it with TPU. It might be needed to adjust flow and/or horizontal expansion (Cura) to achieve good fit and antenna grip. Attach it before securing U.FL antenna connector OR cut it in the back and glue it together afterwards (cyanoacrylate glue might be enough). Photo shows cut adapter without glue. You may also use an additional M2 screw going through Vista in the back to further secure it.
Topics: R/C Vehicles, stl, GEPRC, djifpv, thingiverse, caddx_vista
3
3.0
Jan 6, 2021
01/21
by
Dane Hantz (SurfVulcan)
data
eye 3
favorite 0
comment 0
Simple solution for mounting the stock Vista/Nebula antenna onto a 4mm OD standoff. Designed with a 20 degree misalignment/tilt for optimal reception.
Topics: R/C Vehicles, caddx_nebula, stl, thingiverse, caddx_vista
3
3.0
Aug 9, 2021
08/21
by
Ariano Colinelli (aryco85)
data
eye 3
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: CADDX, thingiverse, 3D Printing, fpv, stl, support, caddx_vista
4
4.0
Jan 5, 2021
01/21
by
Paul Garner (R3aper)
data
eye 4
favorite 0
comment 0
I needed a way to mount a Caddx Vista to the TBS Caipirinha 2 so I designed a pod to hold one. It is just a push fit and it will not fall out. You will need to make a hole from the back of the pod through to the wing pod behind it. I used a knitting needle to do the job, then feed you wires through. You will also need four 20mm x 2mm machine screws to attach the top camera holder to the bottom.
Topics: R/C Vehicles, stl, Caddx Vista, thingiverse, TBS Caipirinha 2
4
4.0
May 1, 2021
05/21
by
Alexandru Home (alexandu00)
data
eye 4
favorite 0
comment 0
Naked Caddx Vista Toothpick Canopy with antenna tubes. I am using this on a Babytooth 1s build. Remix from : Naked Caddx Vista Toothpick Canopy https://www.thingiverse.com/thing:4564163
Topics: stl, toothpick_canopy, dji_vista, drone, thingiverse, Other, caddx_vista
3
3.0
Jun 21, 2021
06/21
by
QuistFPV (QuistFPV)
data
eye 3
favorite 0
comment 0
Topics: R/C Vehicles, mockup, thingiverse, caddx_vista, antenna, stl
1
1.0
Apr 19, 2022
04/22
by
Trevor Schulz (trevorschulz)
data
eye 1
favorite 0
comment 0
This is a mount for the Axis Flying Manta 5" drone frame. Designed to hold: - BetaFPV ELRS Nano 2.4GHz Receiver (but could prolly also hold like and xm+ or similar) - BetaFPV T Antenna - Caddx Vista antenna
Topics: thingiverse, caddx_vista, ELRS, R/C Vehicles, stl, FPV
4
4.0
Mar 15, 2021
03/21
by
Andrew Newton (andrewrcnewton)
data
eye 4
favorite 0
comment 0
Simple mount base for Caddx Vista Digital FPV unit. M2 bolt holes, screw holes for mini metal camera mount, 3mm hole for antenna support (bamboo skewer works well)
Topics: thingiverse, caddx_vista, dji_fpv, R/C Vehicles, stl
3
3.0
Oct 14, 2021
10/21
by
Brad Norman (Verohomie)
data
eye 3
favorite 0
comment 0
Printed in TPU 0.2mm
Topics: thingiverse, R/C Vehicles, CADDX, stl, DJI AirUnit, Caddx Vista
3
3.0
Apr 19, 2022
04/22
by
Alexander Dräbenstedt (Alanzalander)
data
eye 3
favorite 0
comment 0
A recreation of the original caddx vista antenna mount bracket. One version represents directly the orignal dimensions. Your printer must be calibrated or you must apply corrections when slicing to get the propper dimensions. Second version is pre-compensated for a regular uncalibrated filament printer.
Topics: foot, thingiverse, caddx_vista, antenna, mount, R/C Vehicles, stl
5
5.0
Jan 5, 2021
01/21
by
Riho Kirss (rihokirss)
data
eye 5
favorite 0
comment 0
A mounting plate for Caddx Vista for 30x30 stack. Printed of Nylon
Topics: R/C Vehicles, 30x30, stl, mounting_plate, thingiverse, caddx_vista
2
2.0
Sep 14, 2021
09/21
by
Ryan Monaghan (Rmonaghan83)
data
eye 2
favorite 0
comment 0
Caddx Polar mount. Designed to be used with 3M dual lock.
Topics: stl, thingiverse, R/C Vehicles, caddx_vista, caddx polar, CADDX
2
2.0
Dec 14, 2021
12/21
by
ALEX TRAIL (altra_studios)
data
eye 2
favorite 0
comment 0
Use TPU
Topics: stl, thingiverse, caddx_vista, Caddx_Polar, R/C Vehicles, CADDX