8
8.0
Jan 17, 2021
01/21
by
Daniel Patterson (The_Great_Dano)
data
eye 8
favorite 0
comment 0
Calibration Mors Principium minimal (Minimal Calibration Tool) Tools I use to calibrate my printer. I keep these tools for PLA and ABS in a calibration folder on all my sd cards 1: Auto Temp Towers: Find the best temp for you filament with no hassle. 2: Z-Disk; Used to find calibration of your Z-axes and used to prime nozzle if needed 3: Big Disk; Used to clear nozzle during color change. 4: Color Tab; Basically a paint chip for your filament. Extras: With these Upgrades, I can completely...
Topics: Calibration_part, extruder_calibration, calibration, ABS Calibration, printer_calibration, tower,...
13
13
Apr 21, 2021
04/21
by
Emanuel Teljemo (Teljemo)
data
eye 13
favorite 0
comment 0
Your Pal when it comes to calibrating your printer ;) (Always download the latest version) This is a calibration test piece for 3D printers. It is simple and its a fast print wish is important when calibrating. Don't whant to wait forever to start measuring ;) The piece contains a lot of testing like: * Hole diameter * Bridge * Angle * Hole in the side * Pointy tip * Outer text and inner text * Flat piece * Cylinder Measurements is found here on my site :) Upload your makes and what you did to...
Topics: calibration_print, thingiverse, printer_calibration, stl, calibration_test, temp_calibration,...
4
4.0
Jun 11, 2021
06/21
by
Hernando Valencia (Nando65)
data
eye 4
favorite 0
comment 0
Another 20 mm XYZ Calibration cube. ☺
Topics: thingiverse, printer_calibration, Calibration_part, 3D Printing, calibration_cube, calibration, stl
9
9.0
Jan 17, 2021
01/21
by
sahar hirsh (sahar1)
data
eye 9
favorite 0
comment 0
A fixed Calibration Cube, where the X, Y and Z are correctly centered. Have any suggestions? Write them in the comments section :)
Topics: XYZ CALIBRATION, cube, X_calibration, Calibration_part, calibration_cube, calibration, thingiverse,...
4
4.0
Apr 27, 2021
04/21
by
Søren Larsen (Zoren)
data
eye 4
favorite 0
comment 0
Calibrations test Z=50mm X=50mm Y=50mm 10x10x2
Topics: printer_calibration, thingiverse, calibration_test, calibration_cube, stl, 3D Printing Tests,...
5
5.0
Apr 4, 2021
04/21
by
(thingster)
data
eye 5
favorite 0
comment 0
Based on thing ID 24238 (MCroucher), but now as a solid object without holes on the backsides.
Topics: thingiverse, calibration, stl, calibration_test, printer_calibration, 3D Printing Tests,...
2
2.0
Dec 1, 2021
12/21
by
TSF 501 (TSF501)
data
eye 2
favorite 0
comment 0
Print this to Calibrate your Printer. I designed this why I think the Calibration Cube costs to much unused Filament. The Meassurements are: Outside (hight X width X length) 10mm X 15mm X 25mm Have Fun with it.
Topics: 3D Printing Tests, printer_calibration, thingiverse, calibration, stl, calibration_test,...
2
2.0
Apr 19, 2022
04/22
by
martin jacobs (mjwarlock)
data
eye 2
favorite 0
comment 0
100mm xyz calibration test i rounded the edges so you will have a better reading with your calipers the reason for this is that the calibration cube often gives a notch on the outside wich is prevented by rounding it . if printed for the first time : layer height : 0.2 infill : 20 if not : print it with the settings you wil end up printing the most feel free to let me know in the comments if you would like a 20 mm version and sorry for the bad rendering screenshot as i couldt get it better atm
Topics: calibration, thingiverse, printer_calibration, 3D Printing Tests, calibration_cube,...
4
4.0
Mar 16, 2021
03/21
by
Pkale Robinson (dijital6)
data
eye 4
favorite 0
comment 0
This is a simple calibration file. It shares the same dimensions as the 20mm calibration cube, but takes less time to print and uses less filament It is 20mm wide, 20mm long, and 20mm high.
Topics: calibration_cube, thingiverse, printer_calibration, calibration, 3D Printing Tests, stl,...
4
4.0
Jun 11, 2021
06/21
by
(Chucha_TV)
data
eye 4
favorite 0
comment 0
Summary Магазин CREALITY ENDER http://ali.pub/323yh5 Магазин ANYCUBIC http://ali.pub/39t8qo Магазин TRONXY http://ali.pub/323yj3 Магазин ZONESTAR http://ali.pub/323z0z Магазин TEVO http://ali.pub/323zgc Магазин ANET http://ali.pub/323zvi Для Синхронизации оси Z 39$ http://ali.pub/3501sk ИЛИ в розницу за 16,30$: Подшипник 688ZZ (10шт) 3,30$ http://ali.pub/35018j Шкив GT2 (20T W6 B8) (3шт) 3,97$...
Topics: thingiverse, printer_calibration, calibration_cube, calibration_test, calibration, cube, stl
2
2.0
Nov 30, 2021
11/21
by
Jo Ro (Epidii)
data
eye 2
favorite 0
comment 0
I was running into some issues with supports not working properly in my more complex and larger prints. So I decided to make a small object that has most of the surface types and overhangs that supports consistently struggle with. You can scale this up to match a larger object you're looking to print, and preview the supports in your preferred slicer to get a better idea of how your printer will behave. (Or what changes you need to make to get it to behave) As a general rule, supports will...
Topics: printer_calibration, thingiverse, Engineering, calibration, stl, calibration_test, temp_calibration
4
4.0
Jan 8, 2021
01/21
by
Joaquin Telgie (Kakolo)
data
eye 4
favorite 0
comment 0
Just increased the size of the tops and bottom so it stacks better
Topics: printer_calibration, stl, cube, 3D Printing Tests, calibration_test, calibration, Calibration_part,...
8
8.0
Jan 17, 2021
01/21
by
Mario Wolf (wlfmario)
data
eye 8
favorite 0
comment 0
Needed something simple for initial XYZ calibration, so I made this cube.
Topics: cube, Calibration_part, calibration_cube, calibration, printer_calibration, sparkcube, 3D Printing...
6
6.0
Mar 16, 2021
03/21
by
nisza nisza (niewiem)
data
eye 6
favorite 0
comment 0
calibration 20mm
Topics: cone, calibration_cube, stl, 3D Printing Tests, thingiverse, calibration, printer_calibration,...
2
2.0
Dec 1, 2021
12/21
by
Gurpreet Singh (SonOfSardaar)
data
eye 2
favorite 0
comment 0
Rounded corners allow better measurement Shapes make less nose on faces , so better measurement again.
Topics: 3D Printing Tests, printer_calibration, Calibration_part, thingiverse, stl, calibration,...
3
3.0
Apr 5, 2021
04/21
by
Mikel Segundo (MKDOS)
data
eye 3
favorite 0
comment 0
Hey dear Makers! I have designed this calibration cube to be able to check almost all the operations that I usually do with my printer and thus save time. I hope it is useful for you too. Let me know how good are your calibrations!! Greetings MK DOS
Topics: thingiverse, Calibration_part, calibration, 3D Printing, stl, calibration_cube, calibrate,...
6
6.0
Dec 15, 2021
12/21
by
Mark, Howard
texts
eye 6
favorite 0
comment 0
xvii, 170 p. : 24 cm
Topics: Spectrum analysis -- Instruments -- Calibration, Calibration
5
5.0
Mar 13, 2021
03/21
by
(thingster)
data
eye 5
favorite 0
comment 0
I've put some print test cubes each of a different size into a nice collection. It contains 10 different sizes (edge length) reaching from 5 to 50 mm with increments of 5 mm. List: 5 mm 10 mm 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm
Topics: thingiverse, calibration_cube, installation, printer_calibration, calibration_test, stl,...
2
2.0
Jun 21, 2021
06/21
by
James A (DiyProJames)
data
eye 2
favorite 0
comment 0
These are calibration cubes. Each cube is 20mm square. Print all 3 in .12mm , .16mm, and .20mm profile to see if resolution size makes a difference in quality prints You can watch my video here for examples and how to use them https://youtu.be/TeVQRLt3xJU
Topics: printer_calibration, thingiverse, stl, calibration_test, 3D Printing Tests, calibration,...
4
4.0
Jan 19, 2021
01/21
by
Ritchie Wilson (rrjwilson)
data
eye 4
favorite 0
comment 0
Calibration cubes are useless due to proportion of printable dimensions your machine has. A 20mm cube on an Ender 3 is 1/10th of the bed and therefore can easily create errors of at least 1/10 in a full bed print. ie a 20mm cube with 0.01mm inaccuracy is actually over 0.1mm inaccurate over the entire bed of an Ender 3. So all calibration objects for Esteps should take up as much bed as possible. As calibration of XY and Z should be done separately due to the order of recalibration I have...
Topics: Calibration_part, calibration, printer_calibration, 3D Printing Tests, thingiverse,...
3
3.0
Mar 13, 2021
03/21
by
Va2 (MoOSTiK)
data
eye 3
favorite 0
comment 0
J'ai crée cette pièce afin d'avoir le réglage le plus précis avec un lit de 200*200mm, dont voici la marche à suivre : Axe X = 170.00mm Axe Y = 170.00mm Axe Z = 50.00mm Diamètre extérieur du cercle = 100.00mm Ligne diagonale = 229.274mm (Il est conseillé d'avoir un pied à coulisse de 300mm) 1) Imprimer la pièce 2) Mesurer les axes avec le pied à coulisse. 3) Si il y a une différence entre la mesure souhaitée (marquée sur la pièce) et la mesure réelle, il faut modifier le...
Topics: thingiverse, printer_calibration, calibration_test, stl, Calibration_part, calibration, 3D Printing...
9
9.0
Apr 29, 2021
04/21
by
Billy Tail (ProtomakerSprint)
data
eye 9
favorite 0
comment 0
Calibration 100x100 and 50mm diameter circle From end to end X and Y both 100m Outside diameter of the circle is 50mm I've added a version with X and Y letters on so if you remove from bed you know which was which direction of the print. Dimensional accuracy tips https://www.simplify3d.com/support/print-quality-troubleshooting/#dimensional-accuracy
Topics: stl, 3D Printing Tests, Calibration, 100mm calibration, thingiverse, Calibration 100x100,...
9
9.0
Jun 10, 2021
06/21
by
Pelouse Tech (PelouseTech)
data
eye 9
favorite 0
comment 0
This is a thin calibration test, If you are using ABS please use brim to improve stickness. Each axis is named at the inner part of the object. The size of the object is 150 mm each axis for two reasons: My caliper has a max of 154mm The bigger the calibration object the better accuracy when calibrating.
Topics: 3D Printing Tests, Z_calibration, thingiverse, printer_calibration, calibration_test, calibration,...
3
3.0
Jan 3, 2021
01/21
by
Noel Baeten (evilhellfire)
data
eye 3
favorite 0
comment 0
Just started with 3d resin printing. and wanted a nice calibration cube. printed it flat on the surface
Topics: stl, 3D Printing Tests, calibration_test, calibration, Calibration_part, thingiverse,...
12
12
Jan 10, 2021
01/21
by
Ax Smith-Laffin (AxMod3DPrint)
data
eye 12
favorite 0
comment 0
I wanted a larger than 40mm test cube so I designed this up.
Topics: thingiverse, cube, stl, printer_calibration, calibration, 3D Printing Tests, Calibration_part,...
10
10.0
Jan 14, 2021
01/21
by
Christian Hedin (Chris335)
data
eye 10
favorite 0
comment 0
Made a regular cube, a pyramid that prints faster and uses almost half the material, and a step cube so one can check for difference every 5mm up to 20mm
Topics: thingiverse, calibration_print, axis, stl, printer_calibration, calibration, 3D Printing Tests,...
2
2.0
Jul 22, 2021
07/21
by
Skoopsy Doopsy (Skoopsy)
data
eye 2
favorite 0
comment 0
A really quick calibration cube for calibration of x,z,y steps/mm and overflow/filament extrusion issues. Cube Dimensions: Width = 20mm Depth = 20mm Height = 20mm Wall Thickness = 0.8mm This cube will work with a 0.4mm Nozzle.
Topics: calibration_test, calibration_cube, printer_calibration, calibration, stl, 3D Printing Tests,...
4
4.0
Mar 13, 2021
03/21
by
Puzzometry.com Puzzles (jfox100)
data
eye 4
favorite 0
comment 0
This is a simple 1.5"x1.5"x0.05" calibration square that i use to check that my first layer calibration is correct. This prints in just 3-4 minutes so it's a quick way to verify that my printer is good to go for larger prints. I generally keep different gcode files of this CalSquare on my printers SD card (one for each type of material that I print) so that I can easily verify any of the different materials before printing. I use this on my Prusa i3 MK3
Topics: thingiverse, 3D_printing, calibration_cube, printer_calibration, stl, Calibration_part,...
3
3.0
Mar 26, 2021
03/21
by
Darek Norway (DarekNorway)
data
eye 3
favorite 0
comment 0
Calibration cube 20x20x20 [mm] Remember to use stable and high accuracy digital caliper .
Topics: stl, calibration_test, calibration_cube, thingiverse, calibration, 3D Printing
323
323
Aug 2, 2013
08/13
by
Clague, Fred R.
texts
eye 323
favorite 1
comment 0
Topics: Microwave devices--Calibration., Bolometer--Calibration.
9
9.0
Jan 15, 2021
01/21
by
Nat Mundy (GuineaPirate420)
data
eye 9
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/l7g0ciFkPa8
Topics: thingiverse, cube, stl, printer_calibration, calibration, 3D Printing Tests, calibration_cube,...
3
3.0
Jun 20, 2021
06/21
by
Frank Leith (3dpatcanada)
data
eye 3
favorite 0
comment 0
Another hole calibration test piece. This one is thinner and yet has more hole sizes for a better calibration.
Topics: Calibration_part, hole calibration, thingiverse, stl, calibration_test, 3D Printing Tests,...
4
4.0
Jul 25, 2021
07/21
by
Kevin Reid (da_stache)
data
eye 4
favorite 0
comment 0
I wanted to make my own calibration cube because I wanted the arrows to show me which direction to measure. One has rounded corners to directly measure axis movement, one has squared corners to measure weakness of the overall shape. Size is 20mm even with axis letters and arrows slightly inset at .5mm. Designed in Tinkercad
Topics: printer_calibration, thingiverse, calibration_cube, stl, 3D Printing Tests, calibration,...
6
6.0
Jan 21, 2021
01/21
by
Arthur K. (askmurphy)
data
eye 6
favorite 0
comment 0
Having trouble calibrating your printer ? One of the most important things is that your first layer is perfect.. But that's not all, all the visible sides of your 3D-print must be good looking too. So, I made a simple design which shows you in a fast way if your printer calibration is correct and if your printer setup (extruder settings etc) is ok too. Before printing this: Calibrate your printer with your calibration card or whatever you use normally. Start printing this: Print this with a...
Topics: calibration_cube, printer_calibration, calibration, 3D Printing Tests, thingiverse, stl
3
3.0
May 20, 2021
05/21
by
surya alexander (hasapeta)
data
eye 3
favorite 0
comment 0
calibration cube base on fengshui ruler. 38 mm x 38 mm x 38 mm
Topics: calibration_test, 3D Printing Tests, thingiverse, calibration, stl, calibration_cube
3
3.0
Mar 13, 2021
03/21
by
David Jouvence (DavidJouvence)
data
eye 3
favorite 0
comment 0
...
Topics: thingiverse, printer_calibration, calibration_test, stl, calibration, 3D Printing Tests
3
3.0
Apr 16, 2021
04/21
by
Philipp Engel (Philengel)
data
eye 3
favorite 0
comment 0
Here i have created a simple calibration sculpture. All of the extrusions should be exactly 100 mm.
Topics: 3D Printing Tests, thingiverse, calibration_test, stl, printer_calibration, Calibration
3
3.0
May 1, 2021
05/21
by
Γερασιμος Παναγκασιδης (JerryFromGreece)
data
eye 3
favorite 0
comment 0
Multi calibration cube This test is used to: Calibrate dimensional accuracy Stringing Ringing Effectiviness of the part cooling fan! Size of cube is 50x50 Hole is 40mm Pole is 15mm The small rectangles inside are used to test stringing,the letters on the side for ringing,and the spike uptop for the part cooling fan. The corners are filetted so that you can measure the actual walls dimension without the corners bulging and messing with the dimensions. If this test gets enough downloads and...
Topics: stl, calibration, 3D Printing Tests, calibration_cube, printer_calibration, thingiverse
4
4.0
Mar 22, 2021
03/21
by
Damjan (ketukil)
data
eye 4
favorite 0
comment 0
This part was modeled with the intent of calibrating backlash.
Topics: calibration, stl, calibration_test, printer_calibration, 3D Printing Tests, thingiverse
4
4.0
Mar 12, 2021
03/21
by
Michael Krawczyk (MKrawczyk)
data
eye 4
favorite 0
comment 0
I purchased a Creality Ender 3 Pro about a month ago and have had stunning success thanks to Thingiverse, YouTube and the entire maker community. 3D printing has quickly become a passionate hobby for me (an old CIM/CAM/electronics/IT former Marine with a grumpy attitude and a lot of ammo - LOL). This first "Thingy" is a calibration block measuring 10mm x 20mm x 30mm with 3 centered, intersecting holes in each direction (8mm diameter). The purpose is to see opportunities for additional...
Topics: thingiverse, calibration_cube, calibration_test, stl, calibration, 3D Printing Tests
4
4.0
Mar 21, 2021
03/21
by
3D PRINTING HUB (vjs)
data
eye 4
favorite 0
comment 0
this one is for calibrating your xyz axis
Topics: calibration, stl, 3D_print_calibration, xyz, print_calibration, XYZ_CALIBRATION, 3D Printing,...
10
10.0
Jan 10, 2021
01/21
by
educa_thor (educa_thor)
data
eye 10
favorite 0
comment 0
this is basically a small plate with different cylinders ( =outer diameters) and holes ( =inner diameters) from 2,0mm-3,9mm increasing by 0,1mm steps had lots of trouble in the past with tolerances and now i know why... my printer is off. i messured the print, did some excel-magic and BOOM: the maximum differences are from +0,1mm to -0,44mm (see the graphs: the closer the line is to the blue one, the better) right now i know HOW MUCH it is off, but not HOW to FIX the issue. (see my printer...
Topics: calibrate, thingiverse, calibration_print, stl, calibration, 3D Printing Tests, Calibration_part,...
271
271
Aug 7, 2013
08/13
by
Oldham, Nile M.; Laug, O. B.; Waltrip, B. C.; Palm, R. H.
texts
eye 271
favorite 0
comment 0
269
269
Aug 2, 2013
08/13
by
Misakian, Martin.
texts
eye 269
favorite 0
comment 0
365
365
Aug 2, 2013
08/13
by
Mitchell, Richard A.
texts
eye 365
favorite 0
comment 0
286
286
Aug 2, 2013
08/13
by
Reeve, Charles P.
texts
eye 286
favorite 0
comment 0
13
13
Jun 11, 2021
06/21
by
(Phistterbut_Inc)
data
eye 13
favorite 0
comment 0
Summary It's a joke people, calm down. A 50 minute calibration print for anyone with a sick humor. The print shown has slight over extrusion problems with some z axis wobbles. Not very good quality that one. Aim higher. Requires tiny little supports for his ears. How I Designed This Fusion to lop off his head and Meshmixer to sew him back together.
Topics: Hiter Calibration, thingiverse, Hitler, Calibration, stl
5
5.0
Mar 15, 2021
03/21
by
YASİN YÜKSEL (stabtrimout)
data
eye 5
favorite 0
comment 0
XYZ Calibration Cube. Small XYZ letters on cube is better for mesurement with caliper.
Topics: calibration_cube, thingiverse, printer_calibration, calibration, 3D Printing Tests, stl,...
3
3.0
Mar 19, 2021
03/21
by
Niklas Landin (nlandin)
data
eye 3
favorite 0
comment 0
Printer calibration cube in X-, Y- and Z-axis, with positiv and negative spaces. Each measurements (in mm) are stated on the model itself. Can be printed directly on the printer bed without supports.
Topics: printer_calibration, calibration, 3D Printing Tests, calibrate, thingiverse, calibration_cube,...
6
6.0
Apr 20, 2021
04/21
by
Lukas Pomykal (alf249)
data
eye 6
favorite 0
comment 0
Don't forget to like this design before downloading. Anycubic Kossel Wiki: Anycubic Kossel Wiki Anycubic Kossel Marlin guides: Anycubic Kossel Marlin guides Anycubic Kossel Klipper guides: Anycubic Kossel Klipper guides Kossel Replacement Parts Anycubic Kossel Bed Upgrade Kossel E3D V6 upgrade guide Kossel Marlin installation Kossel Delta Calibration Kossel PID calibration Kossel Marlin extruder calibration Kossel Marlin flow calibrationn Kossel Octoprint installation Kossel Corner...
Topics: calibrate, thingiverse, printer_calibration, stl, calibration_test, calibration, Calibration_part,...
