2
2.0
Mar 18, 2021
03/21
by
josu arregui (hosufpv)
data
eye 2
favorite 0
comment 0
Camera holder for TimeWarper frame or any frame with 25mm between pilars. 45º. Switchable at least for Runcam Racer 2 and Foxeer Predator
Topics: R/C Vehicles, fpv camera mount, foxeer predator, drone, fpv, runcam racer 2, thingiverse, fpv...
3
3.0
Apr 1, 2021
04/21
by
Cem İleri (cemileri)
data
eye 3
favorite 0
comment 0
Perfect fit for Raspberry Camera V1.3. The Mounting bracket fits with two M3X12 screws as shown on the pictures..I have also included 18mm slot for easy cable management. walls 5 top layer 4 bottom layer 4 infill 20
Topics: timelapse, Octoprint, Octoprint_Camera, 3D Printing, thingiverse, camera_mount,...
3
3.0
Jan 19, 2022
01/22
by
Josue Gimbernard (OpenOcular)
data
eye 3
favorite 0
comment 0
Happy to share this design with you. A newly designed adapter to capture images from your microscope or telescope using your smartphone. OE-2 is designed to line up any smartphone camera to any microscope or telescope eyepiece lens ranging 15 to 50 mm in diameter. Align OE-2 to the smartphone camera and attach to the eyepiece. OE-2’s eyepiece clamp automatically centers the eyepiece lens to the camera window. Design for general FDM 3D printers using PETG, PLA, or ABS. No additional support...
Topics: stem_education, optics, smartphone_holder, telescope_adapter, thingiverse, astronomy, medical,...
6
6.0
Apr 20, 2021
04/21
by
Casey Holmes (caseyjholmes)
data
eye 6
favorite 0
comment 0
GoPro Session Mount for OG Armattan Chameleon. Print with supports. Retraction helps remove strings. Print with TPU at 230* nozzle, 70* bed, 30mm/s. To install, slip carbon plate inside mount. Set mount and plate into position on airframe. Bend the mount out of the way of the screw holes to install the screws. Don't worry, if you used TPU, it should bend out of the way to install the screws just fine. Insert session through the back before installing flight battery. Features an SD card door...
Topics: thingiverse, fpv, Chameleon, GoPro_Mount, armattan_chameleon, Quad Drone, armattan, Original...
4
4.0
Jan 4, 2021
01/21
by
Israel Bonilla (dronotron)
data
eye 4
favorite 0
comment 0
This remix is for tpu (flexible material) prints. Its a bit shriked to fit tight, also the lateral hole is now a bit bigger for easy access to the usb/sdcard door
Topics: camera_mount, stl, Camera, thingiverse, fpv_camera_mount
3
3.0
Mar 13, 2021
03/21
by
Martin S. (m4RT1n)
data
eye 3
favorite 0
comment 0
got my Caddx ORCA so i made this little mount for it. it fits perfect for the Eachine Tyro129. at the reviews the sound are a bit noisy so i designed a little bonus for this mount in the top you can add a piece of welding wire or similar with foam to dampen the sound. (i use a piece of make-up sponge. dont geht caught by your girlfriend !!!) how to mount/use: -cut a piece of wire (i use 1mm x 26mm steel welding wire) -piece of foam 5x5x20mm -push in lengthways -use plier to push the wire...
Topics: Foxeer, crsf, box, Action_Cam, camera_mount, HD_video, anti_noise, dolphin, fatshark, fpv, taranis,...
3
3.0
Mar 25, 2021
03/21
by
Jim Florrick (qubicllj)
data
eye 3
favorite 0
comment 0
I prefer the camera came with LDARC ET115 , it is named ov231 , and i think it is a good choice to put it on the toothpick frame. The camera angle is 25 degree.
Topics: stl, R/C Vehicles, fpv_camera_mount, thingiverse, toothpick_canopy
3
3.0
Jun 11, 2021
06/21
by
Sławomir Pietrzykowski (Painted_Bird)
data
eye 3
favorite 0
comment 0
A thru-wall mount for OV5647 camera for RaspberryPi. Allows for the usage of the camera on both sides of the mount. Requires 4x fi 3 and 4x fi 2 mm screws with nuts for mounting. Theoretically, it allows for the usage of 3.5 mm and 2.0 mm screws. However, I'm not too fond of the tolerances of the holes on the camera module.
Topics: Robotics, camera_mount, thingiverse, rpi_camera_mount, raspberry_pi_camera, stl
5
5.0
Mar 18, 2021
03/21
by
Pascal Kamber (swissPrinter1)
data
eye 5
favorite 0
comment 0
added to the camera holder an stick. this is the original: https://www.thingiverse.com/thing:834218
Topics: camera, 3D Printer Accessories, stl, camera_mount, OV7670, thingiverse
8
8.0
Jan 16, 2021
01/21
by
David Hartkop (dhartkop)
data
eye 8
favorite 0
comment 0
This is the complete set of 3D objects needed to complete the camera rail described in the book "Create Your Own TIME LAPSE CAMERA RAIL" by David Hartkop, Idea Propulsion Systems. The objects are free to download and use, see license for this object. The original object files were created online with Tinkercad and is publicly available for you to clone & edit here: https://www.tinkercad.com/things/5mFMhwGPMmT-170921timelapsecamerarail Some additional free resources including the...
Topics: Arduino_Uno, Camera, stl, thingiverse, arduino_project, camera_rail_mount, time_lapse, camera_mount
7
7.0
Apr 19, 2021
04/21
by
spencer owen (spudinator)
data
eye 7
favorite 0
comment 0
Top mount for the TBS oblivion pod so you don't need to use the dumb gopro strap. Can also be used to hold fins or other accessories. Works with both the standard pod and the GoPro style pod. **People have reported better luck printing the base plate (dovetail) in TPU instead of PLA** [Assembly Guide](https://youtu.be/UhiVVi4KZLY) # Standard Pod Print the 'curve-adapter' in TPU to act as a shim on the curved surface Print the 'dovetail' Drill / Melt 2 holes into the pod to keep part attached...
Topics: GoPro, thingiverse, tbs, stl, R/C Vehicles, fin, fpv, gopro_session_mount, tbs_oblivion,...
7
7.0
Jan 21, 2021
01/21
by
Hans Frimmel (frimmel)
data
eye 7
favorite 0
comment 0
If you use your structure sensor with a hacker cable, this socket fits the sensor and guides the cable. The thread is for standard tripod.
Topics: Created_with_FreeCAD, Camera, stl, tripod_mount, thingiverse, camera_mount
9
9.0
Jan 18, 2021
01/21
by
Robert Davis (BobDavis73)
data
eye 9
favorite 0
comment 0
EDIT: I have modified the design to spread the mount holes farther apart and added some gussets to strengthen this area. You guessed it, mine broke there. This is a slide in mount for a Raspberry Pi that is already fitted inside a Smraza case. These cases are laminated black and clear plexiglass. I did it this way because I have more uses for my Pi and this way I can pull out the USB connectors and the case just slides out. The camera is an Amazon purchase of a notebook or monitor mount camera....
Topics: 3D Printer Accessories, stl, thingiverse, Octoprint, Octoprint_Camera, octopi, Smraza,...
6
6.0
Apr 19, 2021
04/21
by
Sterling Hanenkamp (zostay)
data
eye 6
favorite 0
comment 0
This was my first attempt at using Fusion 360. It's not perfect, but it works for me. I printed it in Orange Hatchbox PLA using .10mm layer height on my Prusa. The arm is the only tricky part as it needs to be printed upright. You'll want to use a raft, but otherwise it does not need support. (Though, you could print it lying flat with support if you prefer.) None of the other parts need any support. I'm very happy with how the clip attaches to the shelf and could reuse this for others if I...
Topics: thingiverse, stl, camera_mount, Shelf_mount, Camera, raspberry_pi_camera, ball_joint, mount
10
10.0
Mar 22, 2021
03/21
by
Rene Soukup (paku_ia)
data
eye 10
favorite 0
comment 0
Octopi Raspberry pi 3 b+ holder for Anycubic I3 MEGA with camera mount.
Topics: Raspberry pi 3 b+, stl, Anycubic, 3D Printer Accessories, camera mount, Octopi, raspberry,...
6
6.0
Mar 17, 2021
03/21
by
Ruben Lybaert (Turtleruby)
data
eye 6
favorite 0
comment 0
i was searching for a nice octoprint setup for my ENDER 3 PRO. I found a few things but my main concern was that i wanted to fixate it on the y-axis so i did a little remixing and put al the parts together in one project. I hope you like it
Topics: 3D Printer Accessories, Ender_3_Pro, stl, camera_mount, Octoprint, octopi, thingiverse,...
3
3.0
May 1, 2021
05/21
by
DENNIS GEAKE (dgeake)
data
eye 3
favorite 0
comment 0
Raspberry pi camera mount optimized for the Longer LK5 Pro or any 3D printer with a 20mm aluminum extrusion. Camera case optimized for Raspberry pi wide angle camera v2.1.
Topics: stl, raspberry_pi_camera, 3D Printer Accessories, Octopi_camera_mount, thingiverse, Longer_LK5_Pro
4
4.0
Jan 16, 2021
01/21
by
Yann MORERE (ian57)
data
eye 4
favorite 0
comment 0
Octoprint mount with leds and camera module for CR10
Topics: Camera mount, 3D Printer Accessories, thingiverse, Octoprint, Raspberry_Pi, Creality_CR-10, stl,...
5
5.0
Mar 17, 2021
03/21
by
Filip To (msufilip)
data
eye 5
favorite 0
comment 0
This is a segmented arm for mounting an octoprint camera on a 3-d printer. It requires a c-clamp (Gimiton C-Clamp Camera Mount Clamp Clip Aluminum Heavy Duty C Clamp U Clip Bracket for Photo Studio Light Stand Camera Flash). I purchased the c-clamp from Amazon.com (https://www.amazon.com/gp/product/B07B4Z9WWK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1). You use a paper clip to clip the webcam onto the last segment of the arm (CameraMountPlate.stl). You need to print two or more copies of...
Topics: Octoprint_webcam, Prusa_webcam_mount, 3D Printer Accessories, stl, camera_mount, thingiverse,...
3
3.0
Apr 16, 2021
04/21
by
Tamir Rosenberg (Tamiroz)
data
eye 3
favorite 0
comment 0
This camera holder pretends to position the Octoprint camera (which you can find on any online shop) above your computer screen. This stand enables 3 degrees of freedom.
Topics: Octoprint, thingiverse, Octoprint_cam, Octoprint_Camera, stl, Octoprint_webcam, Camera,...
4
4.0
Mar 18, 2021
03/21
by
Francois Notgiven (hsaturn)
data
eye 4
favorite 0
comment 0
Minimalists Supports for occulus, no support needed. All these models are ready and easy to print. They are fast to print (1h at 100% infill for the most complex one on my printer). Many models - Shelf mount - Wall mount - Wall mount with wire hole - Wall mount with wire hole angled at 30° I've printed (some of) them at 100% infill. They are strong enough at 100% infill, and guess that this is not necessary, but these days, I really like to print at 100% infill. Edit 20190226 - Change wire...
Topics: oculus_rift_sensor, oculus, stl, camera_mount, thingiverse, Other
3
3.0
Jan 5, 2021
01/21
by
John Tsiombikas (jtsiomb)
data
eye 3
favorite 0
comment 0
A bracket for mounting the Oculus Rift CV1 tracking camera onto IKEA BROR frames. It's designed to go on the outside of the BROR frame, and bolted in place with two screws/nuts that come with the BROR frames. Unscrew the CV1 camera stand and place the camera in the bracket. It should be a tight fit, but there's also a hole at the bottom to optionally use a standard tripod screw to secure the camera in place. Print with the top face down. I used the cura tree supports for the side panel, and it...
Topics: Oculus_Rift_CV1, camera_mount, stl, Computer, Ikea_Bror, thingiverse
4
4.0
Apr 12, 2021
04/21
by
Vae Victis (Team1418)
data
eye 4
favorite 0
comment 0
Ever wanted to to see whats going on around you without taking of your oculus rift? Well same here. We got an Oculus Rift so we can be "inside" our robot when we we drive it, but in the heat of competition sometimes we need to see whats going on around us. We needed a way mount our camera to the O.R. without altering the case in any way. 5 versions later, we present a camera mount for Oculus Rift DK2. The mount works by clamping on to the power and HDMI connector on the front of the...
Topics: thingiverse, FRC, frc_robotics, Oculus_Rift, camera_mount, Camera, virtual_reality, stl
4
4.0
Mar 20, 2021
03/21
by
(ClassicGOD)
data
eye 4
favorite 0
comment 0
This is a camera mount designed to clip in the slots for the original camera base (if you pull the camera straight up it will disconnect from the heavy base). It was not designed as a standalone object but rather to be used to create your own custom mount. It's tighter than the original clips on purpose - it makes the camera more secure.
Topics: Rift, camera_mount, dk2, thingiverse, Oculus, Computer, Oculus_Rift, stl
10
10.0
Apr 24, 2021
04/21
by
Tom (Damage)
data
eye 10
favorite 0
comment 0
UPDATE 2016_12-19: Added a "1 Leg" version of the mount. In most ceiling mount situations, this is plenty and save's some material. Haven't tried wall mounting, but it may be suitable for that as well. Let me know if you use it and how it works out. This is a mount so that you can ceiling or wall mount the Oculus Rift Sensor. Made to work with #8 Wood Screws and a 1/4-20x1/2 machine screw I picked up my hardware from Home Depot. Here are links... 1/4-20x1/2 Round Head Machine Screw:...
Topics: accessory, virtualreality, Oculus_Rift, accessories, stl, virtual_reality, sensor, camera,...
6
6.0
Jun 20, 2021
06/21
by
João Brito (joaoluisbrito)
data
eye 6
favorite 0
comment 0
- For licensing and commercial inquires - joao.luis.brito.design@gmail.com [This kit used to be paid and it's now free, although I'd appreciate any tips you could send my way!](https://www.paypal.me/jlbrito) Oculus Rift Touch Sensor MEGA PACK! This pack was designed to provide an easy and flexible roomscale setup experience. Features: - Minimal and Advanced Mounts - Easily attachable to walls, ceilings, and other objects - Non-destructive option (no screws required) - Extremely durable and...
Topics: oculus_rift_sensor, oculus_sensor, thingiverse, Sensor_Holder, mount, sensor_mount, gaming,...
9
9.0
Apr 30, 2021
04/21
by
Clark Stephenson (th3v3rn)
data
eye 9
favorite 0
comment 0
I have been getting ready for Touch release and have been using various mounts that I have found but they were either too big, make the sensor hit the wall or put the post on an angle so that you wouldn't be able to rotate the camera without causing tracking issues. This is a remix as I love the tension that it puts on the post with PETG or possibly ABS. I just needed to get the post perpendicular with the floor so that I could rotate it freely when setting up my room. It isn't pretty, I just...
Topics: stl, Oculus, wall_mounted, Office, Oculus_Rift, mount, wall_mounting, Oculus_Rift_CV1, wall_mount,...
6
6.0
Mar 17, 2021
03/21
by
Everett Prairie (MarimBoyWonder)
data
eye 6
favorite 0
comment 0
I was having trouble getting the controller mounts provided by Oculus to print well, so I designed an alternative! it's surprisingly sturdy so far! I used fastening elements from [yyh1002's "Modular Mounting System"](https://www.thingiverse.com/thing:2194278), so technically this is a remix of that. please note the curvature in the grip is designed for a RIGHT touch controller. Please mirror the front and back parts in your slicing program if you want to use this with a left...
Topics: virtual_reality, led_strip, MRCC, Oculus_Rift, Controller_mount, controller, stl, camera_mount,...
2
2.0
Apr 20, 2022
04/22
by
zhen zhao (dynamicoct)
data
eye 2
favorite 0
comment 0
OddityRC FPV GoPro Mount
Topics: fpv, thingiverse, drone, camera_mount, oddity, mount, GoPro_Mount, Other, stl
3
3.0
Jun 6, 2021
06/21
by
Luke James (flexo_fpv)
data
eye 3
favorite 0
comment 0
This is a collection of parts for a 30" fpv racing wing. The intent is for a very fast and stable 6s racing wing. Hot-wire templates are included in the files. They consist of a 9" MH70 aerofoil root, a 7" MH60 middle panel, and 5" MH44 for the tip. I hot-wired mine out of pink rigid insulation foam (Fomular 150 - 1.5"). The motor mount slots on to the back of the wing and can be retained with glue. Rear most spar should be 20mm forward of the trailing edge. 2X M3...
Topics: fpv, sukhoi, hotwire, thingiverse, RC_plane, stl, fpv_wing_racing, R/C Vehicles, fpv_camera_mount,...
10
10.0
Apr 17, 2021
04/21
by
joshua Enos (C3customsllc)
data
eye 10
favorite 0
comment 0
This is a custom mount/holder that i made in fusion 360! i had a older tripod that i found and no one makes holders just for phones so i decided to measure my iPhone x and the mount opening. After i had all those,i modeled the part and printed both at the same time! with the 10 mm square cube to snap onto it to hold it together. i can now record my work and be able to replace hours of lot recordings when i wasn't able to record.
Topics: holder, cellphone, cellphone_stand, 3d printed, thingiverse, tripod, stl, camera mount, iphone_x,...
15
15
Mar 21, 2021
03/21
by
kas chm (kaschm)
data
eye 15
favorite 0
comment 0
This is a case to hold the Olympus Air camera. The camera itself twists into place. The case exposes the power and wifi buttons.
Topics: Olympus, stl, Camera, camera_mount, thingiverse, camera
9
9.0
Mar 18, 2021
03/21
by
Louis Ng (nyw)
data
eye 9
favorite 0
comment 0
This is a mount for your Olympus Air which fits between your camera and the phone mount peripheral and lets you put a strap on it. Depending on the tolerance of your printer you might have to sand down on various places. Due to its small size and shape, if you FORCE it on when it is still a firm fit, you will definitely NOT have a good time taking it back out.
Topics: photography, Camera, Olympus_Air, stl, camera_mount, strap, thingiverse, Olympus
9
9.0
Apr 28, 2021
04/21
by
Louis Ng (nyw)
data
eye 9
favorite 0
comment 0
This is based off of Olympus' sample OPC design files Camera Grip, the original file seems to be one file with the entire model in one piece, I have separated them out and added a rear phone clamp mount to the back of it, hope you guys like it! Note: because of the way it presses the shutter from the side, the camera will be at a 90 degree slant, and holding the camera normally actually takes portrait photos instead of the usual landscape. There needs to be screws that hold the front cover in...
Topics: Olympus_Air, thingiverse, Camera, Olympus, stl, camera_mount, handle
9
9.0
Apr 28, 2021
04/21
by
Louis Ng (nyw)
data
eye 9
favorite 0
comment 0
!!!!!!!!!!!!!!!!!!!!!!! Olympus has posted the stl of the thing that inspired this design here http://opc.olympus-imaging.com/playair/accessory/ !!!!!!!!!!!!!!!!!!!!!!! This allows you to hold your Olympus Air more easily and have a direct view hole to slightly aim where you are taking the photo + a button to take photos with. The bottom screws onto the tripod mount hole (the screw, you have to get yourself). I found using it this way scratched the bottom of the camera a little bit, so I put...
Topics: Olympus_Air, thingiverse, photography, Camera, Olympus, stl, camera_mount
3
3.0
May 21, 2021
05/21
by
Gwynn Dick (Fish-Bender)
data
eye 3
favorite 0
comment 0
Extra mount for microphone
Topics: Microphone, camera_mount, mic, thingiverse, rode, Camera, bracket, stl, camera
6
6.0
Mar 3, 2021
03/21
by
Víctor Zamora Fernandez (VVVICCC)
data
eye 6
favorite 0
comment 0
Handle for Olympus OM-D E-M10 mkii
Topics: Camera, e-m10, OMD, camera_mount, handle, camera_grip, thingiverse, cmera, em 10, Olympus, stl,...
1
1.0
Apr 20, 2022
04/22
by
Matthias Donay (mad_aix)
data
eye 1
favorite 0
comment 0
Adapter for using a LaserPen with Omegon Minitrack LX Quadro to do polar alignment. This adapter can be used - instead of the polarscope holder or - put into the polarscope holder.
Topics: thingiverse, holder, tracker, camera_mount, omegon, Lx quadro, Startracker, Other,...
5
5.0
Mar 4, 2021
03/21
by
greg nicholls (BuiltBrokenGlued)
data
eye 5
favorite 0
comment 0
Hi, take a look at my other designs https://www.thingiverse.com/BuiltBrokenGlued/designs I designed this top mount to center mount my [TX805](https://www.banggood.com/Eachine-TX805-40CH-25-200-600-800mW-FPV-Transmitter-TX-LED-Display-Support-OSD-Pitmode-Smartaudio-p-1333984.html?rmmds=myorder&ID=512671&cur_warehouse=CN) VTX on my Omnibus F4 flight controller. It offers protection on the SD card (though it has to be disassembled to swap or remove). It also has the mount built in for a...
Topics: stl, banggood, quadcopter, omnibusF4, quad, R/C Vehicles, f4_, camera, caddex, top, mount, TX805,...
5
5.0
Jan 6, 2021
01/21
by
Alan Lomax (DrWho577)
data
eye 5
favorite 0
comment 0
A simple one piece mobile phone mount for screwing down to a camera tripod. Can also be used on the back of a music stand. Should fit most phone sizes, either with or without a protective case. Note the use of an elastic band to keep the phone secure even when angled down.
Topics: tripod_mount, camera_mount, music_stand, stl, smartphone_holder, phone_tripod_mount, Phone_Stand,...
8
8.0
Apr 17, 2021
04/21
by
Finn Harms (innif)
data
eye 8
favorite 0
comment 0
This is a clone of the Onepaa x2000 camera mount. For me it works very well.
Topics: thingiverse, Action_Cam, fpv_camera_mount, stl, Onepaa, camera, camera_mount, Camera
4
4.0
Mar 12, 2021
03/21
by
Werner Meier (WerniM)
data
eye 4
favorite 0
comment 0
Offener Halter für Module mit grösseren Kamerabausteinen. Dies ist ein erweiterndes Teil für mein Rasperry Pi Camera holder. https://www.thingiverse.com/thing:3733196
Topics: thingiverse, Parts, raspberry_pi_camera, camera_mount, raspberry, stl
3
3.0
Jun 7, 2021
06/21
by
Steve Koehler (flyingpurplecow)
data
eye 3
favorite 0
comment 0
I love the OpenOcular model, but I wanted a y-axis mount that also helped clamp the phone in place. I also removed the flat supports from the clamps to remove the light gap between the phone and the mount. I also reduced the logo depth to save on plastic a bit In addition to this mod, you'll have to print an additional thumbnut_eyepiece_clamp_PT37.stl from the original model.
Topics: smartphone, Microscope, telescope, education, thingiverse, medical, biology, Biology, stl,...
3
3.0
Mar 26, 2021
03/21
by
(fiveseven808)
data
eye 3
favorite 0
comment 0
Open platform grip! A very cool way to mount and use your Olympus Air A01! Source link here: https://make.dmm.com/shop/94512 This is a grip designed by the person in the link above for the Olympus Air A01 Luckily they've chosen to share the design! I'm uploading it here so I can help preserve the Air A01 files made by other uses as well as spread the word to the non-Japanese speaking part of the ever small community. II haven't figured out which screw is best for the grip. I think I used M3...
Topics: stl, mount, gun camera, modular, camera, Camera, point and shoot, thingiverse, air a01, camera...
5
5.0
May 1, 2021
05/21
by
. . (Fablab_Ideenreich)
data
eye 5
favorite 0
comment 0
**The Open_Shoulder_Rig** The Open_Shoulder_Rig is a modular, adjustable and toolless mountable shoulder rig. This is a simple and cost-effective alternative to conventional solutions. The Open_Shoulder_Rig is robustly designed but is very light due to 3D printing and thus enables long and pleasant operating times. Another advantage is that only a few additional parts are needed for assembly, which can be found in every hardware store. The system can be easily and quickly assembled/dismantled...
Topics: camera mount, toolless, Camera, M6 screw, quick_release, open sourv, thumbscrew, ideenreich,...
6
6.0
Mar 17, 2021
03/21
by
3D Possible (3DPossible)
data
eye 6
favorite 0
comment 0
Yet another use for 4020 rail; A 3D Printable similar to "Rope Cam", "cable cam", or other similar trade names. Includes Fusion 360 Original Files for editing if so desired. )Belt = 3M-300 or 3M-315 (GT2-3M x 300) @ 6mm wide (HTD3M) - search reprap ) 608 Bearings - 2 Per Wheel ) 3D Printable pulleys, gears, motor mounts, ESC holder and battery box. ) Mount to a 1M or "whatever length you want" 4020 extrusion ) Get a 3665 or 36XX motor kit with ESC - First two...
Topics: gimbal_mount, Camera, cable cam, rope cam, camera_holder, stl, camera_mount, thingiverse, 4020,...
12
12
Jan 12, 2021
01/21
by
Nick (Nicrombious)
data
eye 12
favorite 0
comment 0
This so far is the most complex thing I have designed from scratch. I had a need which was that Most GoPro mounts have a door or screw you have to open or undo to get the camera out, this usually means disassembling the rig entirely just to get the footage or replace the battery. This solves that problem (I was inspired by Devin from Make Anything who did a similar project for an older GoPro). Not having a top or door means the GoPro can just be lifted out of the rig and easily placed back in...
Topics: Open Top, GoPro Hero 4, thingiverse, GoPro Mount, Mount, Camera, stl, GoPro Hero 4 Silver, Friction...
4
4.0
Mar 31, 2021
03/21
by
zoltan bzman (rgbskills)
data
eye 4
favorite 0
comment 0
This is a camera mount (micro) for the open-source racing frame "Open racer". Details on the frame here: https://github.com/rgbskills/fpv_open_racer
Topics: thingiverse, fpv, fpv_camera, Hobby, fpv_racing, stl, fpv_racer, fpv_camera_mount
8
8.0
Apr 17, 2021
04/21
by
James Stout (egandalf)
data
eye 8
favorite 0
comment 0
Too cheap to buy a GoPro, I bought a knock-off style [Lightdow product from Amazon](https://www.amazon.com/gp/product/B00X9Y2NFO/). All of the gear that came in my order for mounting it was practically the same as GoPro, but the camera itself followed a different form-factor. Smaller and ports and buttons in different places. Since the original use was to take some video in a pool, the waterproof case was great. But when we took a trip to Disneyland, I wanted to have something with easier...
Topics: lightdow, case, thingiverse, Action_Cam, action_camera_mount, stl, GoPro_Mount, ActionCam, Camera
4
4.0
Apr 1, 2021
04/21
by
Fabian Uehleke (openastrotech)
data
eye 4
favorite 0
comment 0
An Autoguiding scope and camera for the [OpenAstroTracker](https://www.thingiverse.com/thing:4167783) The focuser doesnt really work, just push and pull to focus for now. As always, CAD files are on [GitHub](https://github.com/OpenAstroTech/OpenAstroGuider) and the source code for the ASCOM driver is in the trackers GitHub
Topics: photography, thingiverse, astrophotography, camera_mount, tracker, camera, Camera, stl
