2
2.0
Nov 8, 2021
11/21
by
Yevhenii Lysenko (SmallWings)
data
eye 2
favorite 0
comment 0
Test version of a protective sock for the new action camera DJI Action 2. Made to be able to use a standard magnetic foot. Please test and give feedback. After flying on FPV drone and easy unloading of materials, charging, without having to get the camera from the protection.
Topics: ActionCam, stl, dji action 2, Action 2, fpv_camera_mount, Protection, protector, dji, Camera,...
3
3.0
Jul 22, 2021
07/21
by
Marcello Vasile (TZstudio)
data
eye 3
favorite 0
comment 0
This is only the firt prototype so feel free to remix it if you want. I use the Caddx ant whith the rubber cover so the space for fix it in place is around 20mm. The video transmitter is an Eachine TX5258 with the stock antenna. -EDIT 1: You need to mirror the pod to have the hole for the antenna in the opposit side and moun the video transmitter with the connector up.
Topics: camera, RC_Car, camera_mount, pod, stl, fpv, R/C Vehicles, RC_plane, CADDX, fpv_camera_mount,...
3
3.0
Jun 11, 2021
06/21
by
Matija Črne (matickkk)
data
eye 3
favorite 0
comment 0
1/4 Camera Screw with Male and Female thread. Dimensions : X= 20mm , Y= 20 mm , Z= 19 mm . Thread diameter 6 mm.
Topics: Camera, 1/4 screw, tripod, camera_mount, camera, screw, thingiverse, stl
3
3.0
May 1, 2021
05/21
by
Nicolò de Fornasari (gorz92)
data
eye 3
favorite 0
comment 0
Adapter to fit 3/8 threads camera/lenses on 1/4 tripods. Print in sla for best results. The fit is tight, but better then too loose. The slot is to help inserting/removing it with a screwdriver. 100% infill obviously required for a part this small.
Topics: stl, tripod_screw, photography, camera, tripod_mount, tripod, camera_tripod, camera_mount,...
4
4.0
May 1, 2021
05/21
by
James Dawes (Samourai47)
data
eye 4
favorite 0
comment 0
Printed on an Ender 3 V2 Used as an adaptor to connect the access point fixing plate to a generic 1/4-20 camera mount or mic arm. Used an M3 bolt to connect the part to the mounting plate
Topics: stl, access point, ubiquiti ap lite, 1/4, camera mount, Office, mount, Ubiquiti, thingiverse
2
2.0
Oct 26, 2021
10/21
by
C W (icecreambonanza)
data
eye 2
favorite 0
comment 0
I took the top from https://www.thingiverse.com/thing:4562214, and the threaded piece from https://www.thingiverse.com/thing:1547144, and smashed them together in Rhino3D. Works well with any 1/4-20 threaded tripod. Happy printing. Note: print slow with high resolution to ensure the threads print properly.
Topics: tripod_mount, Raspberry_Pi, tripod, camera_mount, stl, 3D Printing, thingiverse, camera
6
6.0
Jan 16, 2021
01/21
by
Jacek Bu (JaMiBu2003)
data
eye 6
favorite 0
comment 0
2x m5 nut m6x19 screw
Topics: helmet_camera_mount, GoPro_Mount, thingiverse, helmet_mount, helmet, Accessories, stl, GoPro
4
4.0
Mar 15, 2021
03/21
by
jay dizzle (Fully_Retractable)
data
eye 4
favorite 0
comment 0
fits 12mmX12mm FPV cameras w/mic - typically the cheapest e-bay cams out there Feel free to add to this design. Slide camera into shell, and use the wedge to secure it into place.
Topics: thingiverse, fpv_racing, fpv_racer, 12mm, R/C Vehicles, fpv_camera_mount, stl
3
3.0
Oct 14, 2021
10/21
by
Alvin Chuam (alvinchuam)
data
eye 3
favorite 0
comment 0
Topics: fpv drone, thingiverse, Nazgul_5, stl, Camera, GoPro_Mount, Nazgul5_v2, fpv_camera_mount,...
6
6.0
Jan 16, 2021
01/21
by
Stephen Pollock (spollock28269)
data
eye 6
favorite 0
comment 0
I needed a thing to mount my Logitec Clone webcam to the 16mm tent rails for the Creality Large Enclosure. I designed this clamp to fit a 1/4 -20 standard bolt (included) Depending on your camera you may have to trim back the bolt length a little bit.
Topics: Creality, 3D Printer Accessories, stl, tripod_mount, thingiverse, 3d_printer_enclosure, 16mm,...
4
4.0
Mar 16, 2021
03/21
by
james sowin (Coolkid171717)
data
eye 4
favorite 0
comment 0
These are leg extender that fit on any 16mm diameter legs. They are 10 inches long giving you a lot of stability. They are used to greatly increase the stability of a tripod. The photos show that before the extenders were added, the legs could not be positioned at an angle, because the center section hit the floor first. with the leg extenders. See my Imgur album https://imgur.com/gallery/eZgRyU5 I have also added the Fusion 360 file incase anyone wants to remix it or make any changes to it.
Topics: 16mm_tube, camera_mount, slider, thingiverse, no_support, support_legs, stl, supportless, stand,...
4
4.0
Jul 22, 2021
07/21
by
Ajo Joa (AjoJoa)
data
eye 4
favorite 0
comment 0
Needed an adapter for my brand new Caddx Air Unit to fit the QAV-S Johnny FPV Edition. This adapter will fit for the new micro camera from Caddx Air Unit 19mm to the 21mm cage of the Luminier QAV-S JonnyFPV frame. Print in tpu
Topics: adapter, Hobby, dji, stl, lumenier_qav-s, johnnyfpv, CADDX, fpv_camera_mount, thingiverse, Lumenier
2
2.0
Aug 8, 2021
08/21
by
Sebastian Kronlachner (zerbastian)
data
eye 2
favorite 0
comment 0
Camera mount for the EMAX tinyhawk freestyle 2 to fit any 19mm fpv-camera. I designed this especially for the runcam racer 5 but every other 19mm fpv camera should fit as well. The mount replaces the front standoffs, just use the original screws. --Work in Progress-- Feel free to try it out or improve it.
Topics: EMAX, camera mount, thingiverse, racer, R/C Vehicles, runcam, stl, drone, runcam racer 5, racer 5,...
4
4.0
Mar 15, 2021
03/21
by
Sebastian Mauer (mauimauer)
data
eye 4
favorite 0
comment 0
Easy Slot in Camera Mount for 2020 extrusions (Tested on a Prusa i3 MK3)
Topics: prusa_i3_mk3, camera_mount, thingiverse, 2020, camera, stl, tnut, 3D Printer Accessories
4
4.0
Mar 15, 2021
03/21
by
Zach Archer (skyking83)
data
eye 4
favorite 0
comment 0
Some mounts that attach to 2020 extrusion for the Modular Mounting System https://www.thingiverse.com/thing:2194278 Things you'll need: (1) Horizontal or Vertical Mount (1) M5 nut (2) M4 x 12mm Flush Head Screws (2) M4 T-slot nuts
Topics: GoPro, modular_mount, camera_mount, thingiverse, mount, stl, 3D Printer Parts, 2020_extrusion
4
4.0
Mar 15, 2021
03/21
by
Chris Brunstad (DigitalSynergy)
data
eye 4
favorite 0
comment 0
I wanted a camera for my laser etcher and for my octoprint server and unable to find a cheap option, I decided to rip an old laptops camera out and solder it to a usb cord. Usually the colors match, but occasionally they don't. If you want a more in depth tutorial about how to remove a laptop camera and solder it to a USB cord there is an excellent youtube video here: https://www.youtube.com/watch?v=C8pFkhkTvqo I made a mounting system for 2020 extrusions that should fit nearly any laptop...
Topics: camera_mount, laser, thingiverse, camera, 2020_mount, stl, 3D Printer Accessories
3
3.0
Jun 11, 2021
06/21
by
M Craig (mettauk)
data
eye 3
favorite 0
comment 0
2020 extrusion camera mount designed for small cameras with a bush mount hole (1/4"). This was designed for the Raspberry Pi HQ Camera but should work with many other USB web cams etc that have a mounting hole underneath. Requires two 6mm M4 bolts and T nuts or similar to fix to the 2020 extrusion. Print in PETG or ABS if used in a warm/heated environment. EDIT: corrected file uploaded as _01
Topics: Pi HQ Camera, camera_adapter, camera_mount, camera, 2020_extrusion, Raspberry Pi, thingiverse, 3D...
3
3.0
May 1, 2021
05/21
by
Jahnathan Braquet (Jahno)
data
eye 3
favorite 0
comment 0
This part is to mount a 1/4-20 brass insert to 2040 extrusion on a Creality CR-10 clone above the height of the moving bed. You will need the 1/4-20 brass insert (try McMaster), four M3x20 bolts, and 4 T nuts. I'm using this to mount an 11" magic arm to my printer to position a webcam in front for OctoPrint.
Topics: stl, camera, 3d_printer, 3D Printer Accessories, camera_mount, thingiverse
3
3.0
Jun 11, 2021
06/21
by
Andy Ghergu (AndyABG)
data
eye 3
favorite 0
comment 0
A insta 360 go mount for the 2fiddy. this was designed for the insta360 go 2 I'm not sure if it would also work with the original insta360 go. !!!UPDATE!!!: Adjusted size to allow for a more snug fit (camera should no longer fall out) and added a hole for the status light of the camera.
Topics: fpv, Ummagawd_2Fiddy, Insta360_Go, thingiverse, fpv_camera_mount, R/C Vehicles, 2fiddy,...
4
4.0
Jun 11, 2021
06/21
by
Andy Ghergu (AndyABG)
data
eye 4
favorite 0
comment 0
A insta 360 go mount for the 2fiddy. this was designed for the insta360 go 2 I'm not sure if it would also work with the original insta360 go.
Topics: TPU, action_camera_mount, camera_mount, Ummagawd_2Fiddy, Insta360_Go, thingiverse, R/C Vehicles, stl
4
4.0
Mar 15, 2021
03/21
by
Maxime Bo (maxibor)
data
eye 4
favorite 0
comment 0
An adapter for mounting a camera (thread 1/4-20) on a microphone stand (thead 3/8-16). Female thread: 3/8-16 Male Thread: 1/4-0
Topics: camera_mount, Microphone_mount, thread, thingiverse, Microphone_stand, adapter, camera_adapter,...
3
3.0
May 1, 2021
05/21
by
Robert Sene (ToonamiSenpai)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4814050 presented a camera screw to with a Go Pro mount.
Topics: stl, GoPro, camera, GoPro_Mount, 3D Printer Accessories, camera_mount, thingiverse
4
4.0
Oct 15, 2021
10/21
by
andres moreno (benjiyay)
data
eye 4
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: Foxeer, thingiverse, foxeer_razer_nano, stl, fpv_racer, 3D Printing, fpv_camera_mount, fpv,...
7
7.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 7
favorite 0
comment 0
If you need a variable camera angle mount for nano cameras this is your file.
Topics: drone_racing, thingiverse, Diydrones, fpv_camera_mount, R/C Vehicles, stl
3
3.0
Jun 22, 2021
06/21
by
DanTech (DanTech)
data
eye 3
favorite 0
comment 0
360 double joint for GoPro necessary M4 screw+nut
Topics: stl, ball_jointed, joint, 360_degree, Action_Cam, gopro_accessory, fusion_360, 360, Gadgets,...
3
3.0
Nov 8, 2021
11/21
by
Tughan Buyukkibar (tughanbuyukkibar)
data
eye 3
favorite 0
comment 0
I designed it so you can connect a camera to your 3D printer.
Topics: mount, camera_mount, stl, creality_ender_3_v_2, creality_printers, ender_3_v2, xiaomi, xiaomi_360,...
3
3.0
Jul 3, 2021
07/21
by
Yuriy Sakhno (Yuriy12)
data
eye 3
favorite 0
comment 0
Panoramic head for 3D spherical panorama. For easy use, there are click-stops on the horizontal and vertical pivots that provide 12, 16, 30 and 36 stops per turn (or every 30, 22.5, 12 and 10 degrees). Also, the head has a quick release plate. The head can handle heavy DSLR cameras. Tested with Canon EOS 6D + Canon EF 24-105 mm and Canon EOS 5Ds + Canon EF 24-70 mm. When you turn the head, there is a small swing in the upper part, but a couple of seconds is enough for the structure to...
Topics: photography, Camera, panoramahead, panohead, thingiverse, stl, panoramic, camera_mount,...
3
3.0
Jun 21, 2021
06/21
by
Marko Roolaid (Roolaid)
data
eye 3
favorite 0
comment 0
Video https://youtu.be/0Q-d2ZiXACc
Topics: rcvehicles, thingiverse, RC_plane, camera, roolaid, 3dprintable, GoPro_Mount, RC_Car, runcam2, R/C...
4
4.0
May 1, 2021
05/21
by
Bram Thunnissen (BT-Design)
data
eye 4
favorite 0
comment 0
I have made an easy and cheap camera holder/mount for viewing the 3D-printer on distance. I used a Tuya camera from AliExpress: https://a.aliexpress.com/_uRgqyT I can now monitor and control (on and off) the printer on distance in combination with a Tuya smart socket (also from AliExpress) and the TuyaSmart App. Hopefully you enjoy it at much as i do!
Topics: stl, camera, 3d_printer, Tuya, aliexpress, 3D Printer Accessories, camera_mount, camera_holder,...
4
4.0
Mar 15, 2021
03/21
by
Marty McFlyFly (MartyMcFlyFly)
data
eye 4
favorite 0
comment 0
Third person view arm for impulserc Apex and Insta360Go combined with this cammount https://www.thingiverse.com/thing:4290123 mount printed in TPU and arm printed in PETG or PLA https://www.instagram.com/p/CL2Z5HJK-7_/ first test (very shaky imo) will try pla next or dualarm design
Topics: 3D Printing, thingiverse, fpv_camera_mount, apex, ImpulseRC_Apex, Insta360_Go, Thirdperson, 3pv,...
4
4.0
Jun 10, 2021
06/21
by
Jacob Summers (jsummers06)
data
eye 4
favorite 0
comment 0
Description: A simple offset camera mount for CR10 and similar printers with 4020 extrusions along the sides. requires 2-4 M4 T-nuts and cap head screws and a single 1/4-20 machine screw or bolt of an appropriate length to mount the camera. A small riser/washer between the camera and the mount is included to allow for a longer (easier for me to find in my garage) screw to be used or to add clearance for webcam features. camera can be rotated to align the picture and many webcams have enough...
Topics: CR10, camera_mount, 4020, thingiverse, 3D Printer Accessories, stl
2
2.0
Nov 30, 2021
11/21
by
John Brunelle (Tinker_John)
data
eye 2
favorite 0
comment 0
An endcap for 4040 Extrusions for use with flexible lube tube to mount....whatever. Centre hole is M10x1.25 thread. I used #10 x 3/4 Coarse wood screws to mount endcap. If you work them in and out of the 4040 holes they will tap themselves. Enjoy!
Topics: 4040, thingiverse, Ender, 3D Printer Accessories, 4040_Mount, stl, camera_mount
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
This is the standard FPV camera mount for Raven 5-inch frames by ReduxAir.com
Topics: drone_racing, thingiverse, fpv_camera_mount, fpv_racer, R/C Vehicles, stl
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
Cam mount made for racing with a Predator V5 Nano. Shows props in view.
Topics: drone_racing, thingiverse, fpv_camera_mount, drone, R/C Vehicles, stl
4
4.0
Jan 16, 2021
01/21
by
(madmodder123)
data
eye 4
favorite 0
comment 0
60mm was a little too long for my setup so I slimmed it down to 48mm
Topics: raspberry_pi_camera, 3D Printer Accessories, camera, stl, thingiverse, Raspberry_Pi, mount,...
4
4.0
Jun 6, 2021
06/21
by
Mikhail S. (Qteb)
data
eye 4
favorite 0
comment 0
#### Информация Модель предназначена для закрепления модуля камеры 4K ELP c установленным объективом 94.5 градуса. #### Список компонентов: * 4x DIN912 M2x6 винт * [4K USB Camera](https://letyshops.com/r/aliexpress-f61b5b5fc8f5) #### Параметры камеры: Полезные ссылки по настройке параметров камеры для mjpg-streamer:...
Topics: thingiverse, 3D Printer Accessories, UlTi_steel, camera_mount, stl
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
Custom mount for Vanover
Topics: drone_racing, thingiverse, fpv_camera_mount, dji_fpv, R/C Vehicles, stl
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
The standard FPV camera mount is 45 degrees but if you need more camera tilt, this is for you. And it works flawlessly with Foxeer Predator V5 Nano cameras.
Topics: drone_racing, thingiverse, fpv_racing, fpv_camera_mount, fpv_racer, R/C Vehicles, stl
4
4.0
Mar 15, 2021
03/21
by
Jason Jarrach (Jason_Jarr)
data
eye 4
favorite 0
comment 0
I Modeled a Manfrotto plate to make my camera film vertical instead of landscape.
Topics: camera_mount, thingiverse, L bracket for camera, Camera, cameras, Manfrotto, stl, tripod_adapter
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
We designed this 57-degree camera mount for DH FPV. It works perfectly with RunCam Racer 3 cameras.
Topics: drone_racing, thingiverse, fpv_camera_mount, R/C Vehicles, stl
5
5.0
Jan 16, 2021
01/21
by
Redux Air (ReduxAir)
data
eye 5
favorite 0
comment 0
This is a 60-degree angle mount designed specifically for a RunCam Racer3.
Topics: drone_racing, thingiverse, fpv_camera_mount, drone, R/C Vehicles, stl, Drones
2
2.0
Sep 13, 2021
09/21
by
(uho_www)
data
eye 2
favorite 0
comment 0
75mm 規格のVESAマウントをよくあるカメラネジに取り付けるアダプターです。 はめ込むナットは日本国内で流通しているウィットネジ（ウィットワース）です。 W1/4 サイズのナットに合うように作りました。 ビデオ雲台のビデオボスに対応した穴を設けたので回転しにくいです。 https://youtu.be/yrg5F8aRzOw
Topics: stl, vesa, thingiverse, Computer, vesa_mount, camera_mount, VESA_75, Vesa_Adapter, camera_adapter
2
2.0
Oct 29, 2021
10/21
by
Patrick Lavelle (NotLikeALeafOnTheWind)
data
eye 2
favorite 0
comment 0
A simple camera mount for an 8020 series 10 or equivalent extrusion. You will need a 1/4-20 3.5in bolt.
Topics: thingiverse, camera_mount, stl, 8020_1010, 8020_series_10, 8020, camera, Camera
5
5.0
May 1, 2021
05/21
by
Ender Dosed (Etective)
data
eye 5
favorite 0
comment 0
I tried printing the phone clamp so many thingis here seems to want to utilize, only to find that the pieces never want to seem to fit together correctly, so I frankenstein'd my own and its a much better solution. Used this Phone Clamp as a Remix: https://www.thingiverse.com/thing:2505243 With the adapters for the Articulating Modular Arm: https://www.thingiverse.com/thing:2448971
Topics: stl, articulating, Mobile Phone, clamp, webcam_holder, mount, webcam_mount, camera_mount, adapter,...
2
2.0
Oct 29, 2021
10/21
by
Sven Gächter (sgaechter)
data
eye 2
favorite 0
comment 0
This is a console to hold the cable and the connectors right below the Camera. I made this console because I couldn't pull the connectors through my wall. The Camera can be mounted with three M4 Screws. Therefore three M4 nuts can be pushed from the backside into the predefined standoffs
Topics: Abus, thingiverse, Parts, dome, camera_mount, stl, TVIP42561, camera
3
3.0
Sep 13, 2021
09/21
by
Alexander Malyshev (Dogfighter)
data
eye 3
favorite 0
comment 0
AEE Action camera frame box, use for rear view on my bike
Topics: stl, thingiverse, action_camera, camera_mount, aee, Camera
3
3.0
Jun 10, 2021
06/21
by
Vito Cientanni (etarfri-org)
data
eye 3
favorite 0
comment 0
https://youtu.be/_yap-J7tUc8 Etafri ÆSIR II - An Open-Source, Endurance Quadcopter: 2S-8S Power ÆSIR II is an open-source design concept, allowing users to fully 3D print a high performance, lightweight quad-copter to almost limitless specifications of their choosing. ÆSIR II has over 30,000 different unique combinations of battery options ranging from 2S to 8S 18650 Li-Ion packs, any LiPo battery, between 4" to 6" frames in numerous styles, different FPV setups, canopy choices, or...
Topics: fpv_racer, Quadcopter_Frame, betafpv, Quadcopter, miniquad, diy, Drones, endurance, fpv_racing,...
4
4.0
Mar 16, 2021
03/21
by
Pavel Peryshev (PachRay)
data
eye 4
favorite 0
comment 0
ESUN EPA Nylon at 260deg
Topics: fpv_racing, thingiverse, sub250g, R/C Vehicles, fpv_camera_mount, stl, fpvfpv250
4
4.0
Oct 15, 2021
10/21
by
Zbigniew Rodowski (zbysior)
data
eye 4
favorite 0
comment 0
Designed this to be mounted on the movable head of the printer. This type of mount follows the print vertically so you can see the printing being done all the way to the top. Had many tall prints that went above my cameras view. Using 3.5mm screw with a nut. I designed it for 2 screws but my fingers are not small enough to get to the top screw. So its running on only the bottom one now. EDIT: This is a third version, shortened the leg also strengthened the arm, seems like those are pretty good...
Topics: anycubic, wyze, thingiverse, stl, 3D Printer Accessories, i3 mega, wyzecam, wyze cam, camera mount
2
2.0
Sep 13, 2021
09/21
by
Simon Quigley (simonq80)
data
eye 2
favorite 0
comment 0
30° Hero 5/6/7 mount for Chris Rossers' AOS 5 / 5.5 frames. Tested with a hero 7 and AOS 5.5. Print on its side with 100% infill TPU
Topics: stl, thingiverse, fpv_camera_mount, R/C Vehicles, GoPro_Mount
