4
4.0
Jan 7, 2021
01/21
by
Sacha Drenth (Drenth_Engineering)
data
eye 4
favorite 0
comment 0
Automatic cat feeder with optional reservoir extender. I do recommend scaling it up a bit since the one i printed om my prusa mini doesn't quite do the job. At the current size, i have to shake the feeder a bit to refill the bowl. Scaling it up will probably solve this. Further instructions are on the feeder itself. The lid that's included is for the reservoir extender and not for the feeder itself.
Topics: cat, cat_feeder, feeder, stl, Pets, Cat_feeder_bowl, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Shayna Ahteck (shaynathemaker)
data
eye 6
favorite 0
comment 0
So I quickly whipped up this design for a feeding system for cats with megaesohpagus, an enlargement of the esophagus that does not allow them to push down food while eating without the assistance of gravity. My friend contacted me on behalf of her aunt who rescues kittens, but could not afford to buy a specialized device. This device uses the arm and attachment elements from the popular Modular Mounting System with a custom mount for a small food bowl. Uses 4 M5 x 20 screws and hex nuts. Would...
Topics: cat_feeder, Pets, megaesophagus, stl, thingiverse
10
10.0
Apr 5, 2021
04/21
by
Roger (Lippy)
data
eye 10
favorite 0
comment 0
As much as I liked Kitlaan's feeder design, it really showcased my lack of wood-working abilities to make a suitable frame. I designed this frame so that anyone who prints his auger design can also print a box to hold it in. The back of the box has a built-in slot to hold an Arduino Pro Mini, and in my experience I found best results when cutting the PVC 'T' connection to 97mm, and putting the auger into the short end. The food-storage 'hopper' that stores the food is a Cupcake Pen (sold under...
Topics: thingiverse, stl, Pets, cat_feeder, feeder
3
3.0
Jan 7, 2021
01/21
by
Daniel Foley (dfoles)
data
eye 3
favorite 0
comment 0
I've read that having an elevated and angled food bowl for cats is supposed to help prevent them from throwing up. So I quickly designed this. You'll need to print 2x sides and 1x brace. There are magnet holes in the sides designed for a 5x2mm magnet.
Topics: cat, cat_feeder, pet_food, stl, pet_bowl, Pets, Cat_feeder_bowl, Cat_food, thingiverse, dfoles
5
5.0
Jan 16, 2021
01/21
by
Sacha Drenth (Drenth_Engineering)
data
eye 5
favorite 0
comment 0
I designed this automatic cat feeder, complete with reservoir extension. It's a self filling bowl without the need for electronics or intervention... It is however only suitable for cats that don't eat more than they need. You do need a little bit of supports on the reservoir exit. I printed this on my prusa mini, so any printer can print this size. It took a lot of time to design and prototype this, so if you like it a donation would be very welcome.
Topics: automatic_cat_feeder, Automatic, automatic_feeder, thingiverse, Pets, Cat, Cat_food, stl,...
3
3.0
Apr 24, 2021
04/21
by
Jacob Treat (jactre)
data
eye 3
favorite 0
comment 0
This is a slow feeder designed for cats or small pets. Food can be inserted into the feeding tube which is closed with a screw cap. The tube rests on the top of the bowl and is held in with two pins. I have attached both the split model as well as the whole bowl. The split model will need to be secured with M3 screws and nuts. Cat loves it. https://www.reddit.com/r/functionalprint/comments/h90gx0/slow_feeder_in_action_cat_likes_it/
Topics: Cat_feeder_bowl, slow_feeder, cat_feeder, bowl, stl, cat_toy, kitty, Pets, thingiverse, cat, feeder
9
9.0
Mar 9, 2021
03/21
by
COURS Florian (Feataur)
data
eye 9
favorite 0
comment 0
This thing prevents your cat eating his kibble from the top of Catit Senses V1.
Topics: stl, thingiverse, feeder, cat, Pets, cat_feeder
6
6.0
Apr 12, 2021
04/21
by
Pablo Gon (sector7gp)
data
eye 6
favorite 0
comment 0
Based on the project of http://www.thingiverse.com/thing:27854 I added a digital scale and is conected to internet in order to know when the cat is feeding. You can see the graph here https://thingspeak.com/channels/18090. I Have changed many thing. The screw has three turns, and is larger. So the food doesnt jam. The scale to feed the exactly food the cat needs, twice or three times a day. Also has a display to show when is gonna feed and the actual food weight! Rv1: Added the bowl for a...
Topics: thingiverse, cat_feeder, Pets, arduino, stl, iot
6
6.0
Apr 20, 2021
04/21
by
Ayrton DRAUX (D_Ayrton)
data
eye 6
favorite 0
comment 0
This is a cat feeder / toy You put food in it and let the cat play with it If your cat il always inside and don't move a lot, this is a great way to get him "exercised"
Topics: thingiverse, stl, 3D Printing, Cat_feeder, Pipolino
6
6.0
Jan 21, 2021
01/21
by
andrew kaehler (atk122388)
data
eye 6
favorite 0
comment 0
removed the end cap and removed some of the outside material to use less material i am using this to make a tube to my cat dishes from my automatic cat feeder
Topics: 3D Slash, rainstick, thingiverse, cat feeder, Other, stl
4
4.0
Mar 15, 2021
03/21
by
Pavel NS (PavelNS)
data
eye 4
favorite 0
comment 0
Кормушка для бездомных уличных котов. Корм засыпается в сухую пустую 5л бутыль из под воды и высыпается в щель по мере отгребания голодными котами из этой щели корма. Помимо распечатки и бутыли нужны ещё 3 отрезка 20мм полипропиленововой трубы (или любой другой круглой...
Topics: cat, gravitational, thingiverse, cat_feeder, Pets, feeder, stl
3
3.0
Mar 22, 2021
03/21
by
Alan Viverette (alanviverette)
data
eye 3
favorite 0
comment 0
Modified version of my original extension tube, with parameters set to make the widest possible self-supporting funnel that will fit on the Ender 3 Pro bed. This makes it easy to fill the extension tube with kibble. The model is adjustable to fit differently-sized printers, but make sure you keep the walls close to 45 degrees to avoid the need for supports.
Topics: cat_feeder, stl, Pets, Funnel, thingiverse, Super_Feeder
8
8.0
Apr 17, 2021
04/21
by
(cooasty)
data
eye 8
favorite 0
comment 0
3 different leg options. 3/8" tubing or dowel, cut 125 mm for shoe application leg_shoe....30% 4.4.4.4 0:19 hr x 3 leg_hollow..10% 4.4.4.4 0:43 hr x 3 leg_full........10% 4.4.4.4 1:20 hr x 3 siloBottom..10% 4.4.4.4 3.52 hr x 1 bowl............10%.4.4.4.4 2:48 hr x 1 hinge...........30% 3.4.4.4 0:46 hr x 1 cover...........30% 4.4.4.4 1:35 hr x 1 spacer.........30% 4.4.4.4 0:14 hr x 1 siloTopCover & feed level indicator. used 1/2" dowel cover.........30% 4.4.4.4 2:40 hr x 1...
Topics: cat_feeder, thingiverse, stl, cat, pet_feeder, Pets
4
4.0
Jun 10, 2021
06/21
by
Adrian Bogdan (Bomberman)
data
eye 4
favorite 0
comment 0
Cats Feeder Bowls for water and food,
Topics: bowl, cat, cats, cat_bowls, Cat_Feeders, thingiverse, feeder, Cat_feeder_bowl, pets, cat_feeder,...
5
5.0
May 1, 2021
05/21
by
G. K. (Merandey)
data
eye 5
favorite 0
comment 0
cat toy This cat toy/feeder consists of two parts whitch can be screwed together. I designed this in that way that it isn`t too easy to get the food. The diameter of the ball is 75mm; the diameter of the hole is 14mm. Print the “egg_base_brim” file with brim! https://youtu.be/ScU1KQ_0754
Topics: stl, cat, feeder, Pets, cat toy, pet, thingiverse, cat feeder
6
6.0
Mar 18, 2021
03/21
by
Daniel Szuchi (szuchid)
data
eye 6
favorite 0
comment 0
I planned top, bottom and plate for the feeder. We use this thing, and its work fine. ####UPDATE -Plate height 20mm -I made food can -I made food can top
Topics: cat_feeder, Pets, pet, feeder, stl, thingiverse, pet_feeder, cat
2
2.0
Dec 1, 2021
12/21
by
Justin Torbey (jt20110627)
data
eye 2
favorite 0
comment 0
This cat feeder is a remix to add functionality. It uses 3 feeders, each with an RFID reader to read each cats collar tag. Each dispenser has its own auger based dispenser powered by a NEMA17 stepper motor. The RFID readers and steppers are controlled by an arduino uno and an esp8266 (D1 Mini). Two motor shield V2s are used to actually control the motors. All power is supplied by a 5v adapter. The electronics all sit in between the 3 vertical PVC tubes (3" PVC). The two horizontal pieces...
Topics: ESP8266, cat_feeder, thingiverse, Auger, cat, stl, arduino, feeder, DIY
4
4.0
Mar 15, 2021
03/21
by
Pavel NS (PavelNS)
data
eye 4
favorite 0
comment 0
Свежий на 07.02.21 проект Алекса https://alexgyver.ru/gyverfeed2/ https://youtu.be/cjRWSUdme2g Сделал как левый, так и правый винт (хотя, симметричное отображение в слайсере сделать - пара пустяков) Добавил чуть-чуть "мяса" по краям шнека - для прочности. Также шнек имеет более "пихательную"...
Topics: cat, thingiverse, pellet, cat_feeder, Pets, feeder, stl, alexgyver, gyver
8
8.0
Jan 16, 2021
01/21
by
Simone Fois (simonefois)
data
eye 8
favorite 0
comment 0
This nice 3D printable device can help you so much! Designed to work with a Arduino or any PIC Pet activation through the big button
Topics: cats, pets, thingiverse, dogs, 3D Printing, home, stl, cat_feeder
2
2.0
Dec 14, 2021
12/21
by
Christoph Puhl (cpuhl51)
data
eye 2
favorite 0
comment 0
Streu die Katzenleckerlies in die Rinne oder den Tunnel und lass die Katze Spaß dabei haben, sich die Belohnung zu angeln. Put the Cat Candy into the device and let her enjoy getting it's reward out.
Topics: Leckerli, Kazenfutter, cat feeder, Cat toy, Pets, stl, thingiverse, Katzenspielzeug
3
3.0
Mar 15, 2021
03/21
by
Nicolas Padfield (xnicolas)
data
eye 3
favorite 0
comment 0
Fish feeder Design Michaela Wallachová Jakobsen Bo Thorning v2 modifications (more 3d printed, less plexiglass pipe required) Nicolas Padfield https://a360.co/3oJd8J8 Stepper motor NEMA 17 with a 5:1 planet gear https://www.google.com/search?q=nema+17+stepper+5%3A1+planet+gear
Topics: cat, fish, thingiverse, fish_feeder, cat_feeder, pet, pets, Pets, feeder, stl
7
7.0
Mar 17, 2021
03/21
by
Jasen Stengel (mightygrom)
data
eye 7
favorite 0
comment 0
I added a simple food chute and an adapter for the caps of fruit juice bottles (reused to store food, sized for 1-1/2 ID pipe I used the printed parts from Kitlaan's thing:27854 but found a lack of clear documentation on how to wire it and the code was way to complex, and I pissed my wife off by getting frustrated... so I stayed up late and hacked lots of other people's projects together to make this --SIMPLE-- easy to adjust code. The numbers I have in drop a reccomended sized meal three times...
Topics: cat_feeder, Arduino_Mega_2560, Arduino_Uno, Pets, stl, thingiverse, pet_feeder
10
10.0
Jan 14, 2021
01/21
by
S. Schmitt (Edd77)
data
eye 10
favorite 0
comment 0
The next versions / functions are still in planning, and there is still a lot of testing to be done. I want to test a level indicator and weight sensors. Version 3 is to be created entirely in the 3D printer Steuerung https://www.letscontrolit.com/wiki/index.php?title=%22Adafruit_Motor_Shield_v2%22 ElektronicBox WeMos D1 R2...
Topics: nema17, cat_feeder, thingiverse, cat, stl, pet_feeder, dogs, Pets, feeder, ESP8266
3
3.0
Apr 1, 2021
04/21
by
magda jaud (Magdaja)
data
eye 3
favorite 0
comment 0
This remix works togehter with the "Cat toy playing board pegs play". Use the middlepart to make the playingboard taller as you wish. Minimum for a board 4x cat_puzzle_tunnel_v1.stl This game board for cats is a great way to keep cats busy. Just print 4 oft the stl modell an klick them together. It is supposed to be a snug fit. Then put some of your cats favorite snacks inside and watch them geting it. My cat is rather small (3kg) so you eventually need to scale the pices in slicer...
Topics: thingiverse, cat, toy, cat_feeder, board, Pets, cat_toys, pet, cat_toy, stl
4
4.0
Jun 7, 2021
06/21
by
Leo Bispo (ldab)
data
eye 4
favorite 0
comment 0
This was more than a weekend project, took few designs to get it working, check code, etc at: https://github.com/ldab/pet_feeder You will need 2x M4 and 2x M2 screws
Topics: Pets, iot, cat feeder, feeder, thingiverse, pet feeder, stl, arduino, servo, pet, ESP8266
3
3.0
Mar 13, 2021
03/21
by
JOHN ROBERTSON (W5CYF)
data
eye 3
favorite 0
comment 0
I needed to attach the pet feeder, designed by CptPicard, to a container that will hold a larger supply of food. This adapter fits the original hopper and is attached with screws. Printed in PLA. There are two files, one with mounting holes and one without. If you are building the pet feeder you can click here for source of stepper motors and driver boards: Amazon: https://amzn.to/2qje3rk (Disclaimer) W5CYF is a participant in the Amazon Services LLC Associates Program, an affiliate advertising...
Topics: dog feeded, thingiverse, Pets, pet feeder, stl, arduino, stepper motor, 28BJY-48, cat feeder
12
12
Jan 14, 2021
01/21
by
Raymond Kuriger (kuriger9)
data
eye 12
favorite 0
comment 0
My cat needs to go on a diet and the vet recommended that she be fed a 1/4 cup of food twice a day. This was a great opportunity to create a one scoop meal. The text is not embossed on the model (too small to print). You can use the ears to hold it during scooping.
Topics: thingiverse, cat_feeder, cat, stl, cat diet, 1/4 cup, cat_food_scoop, Pets
3
3.0
May 1, 2021
05/21
by
Stephane Dugast (3DKit)
data
eye 3
favorite 0
comment 0
A simple print in place cat feeder
Topics: stl, cat, feeder, Gamelle, print_in_place, 3dkit, Pets, printinplace, reservoir, thingiverse, chat,...
4
4.0
Mar 10, 2021
03/21
by
Reese Allen (reeseallen)
data
eye 4
favorite 0
comment 0
This divides the output of an automatic pet feeder into two chutes, so that the kibble gets evenly divided. Put two bowls under it and now your feeder will serve two pets, each with their own bowl. To the best of my knowledge, this only works with the **PetSafe Healthy Pet Simply Feed** automatic cat and dog feeder, available on Amazon. I have had one of these feeding my cats every day for several years now and I can't recommend it highly enough. Make sure you get the AC adapter, but also be...
Topics: dog, cat feeder, dog feeder, stl, thingiverse, dogs, cat, cats, Pets, pet feeder, automatic feeder
6
6.0
Mar 5, 2021
03/21
by
James (strablej)
data
eye 6
favorite 0
comment 0
This is an enclosure built around the PVC/servo/auger from kitlaan's Auger-Based Cat Feeder (https://www.thingiverse.com/thing:27854). Supplies needed: Continuous-rotation servo 1.5" PVC T-joint Reservoir from a cereal dispenser (https://www.amazon.com/dp/B00147GB2O/ref=cm_sw_em_r_mt_dp_U_pfZJCbE1DG33T) - capacity is large enough to hold 7+ days of food for a single cat Raspberry Pi Zero (An arduino would also work just fine) Optional - laser range finder...
Topics: cat_feeder, Cat_food, stl, pet_food, automatic_pet_feeder, cat, pet_feeder, Pets, Auger, thingiverse
4
4.0
Mar 13, 2021
03/21
by
magda jaud (Magdaja)
data
eye 4
favorite 0
comment 0
This game board for cats is a great way to keep cats busy. Just print 4 oft the stl modell an klick them together. It is supposed to be a snug fit. Then put some of your cats favorite snacks inside and watch them geting it. My cat is rather small (3kg) so you eventually need to scale the pices in slicer up: original size for cats up to 4kg (tested) 120% for cats up to 6kg (estimation) If you are not sure about the size print out just one pice and test if your cat can fit her paws through....
Topics: food, toys, thingiverse, pegboard, 3D Printing, cat_feeder, board, pet, cat, cat_toy, stl,...
4
4.0
May 1, 2021
05/21
by
Fabio Cominato (fabiocriss)
data
eye 4
favorite 0
comment 0
The project was inspired by the CAT food dispenser https://www.thingiverse.com/thing:3298177. The dispenser is completely automatic, just set the time interval and the quantity to be dispensed. Features - Timer setting from 15 minutes to 24 hours - Quantity to be dispensed from 2g. to 50g. - Use a 1kg load cell to weigh the quantity to be dispensed - The tare is performed before dispensing (if there is food in the bowl it is added) - It has an RTC module that guarantees a precise timer and...
Topics: stl, pet dispenser, cat dispenser, pets dispenser, pet feeder, cat feeder, cat food, cats...
2
2.0
Apr 19, 2022
04/22
by
BSense (BSense)
data
eye 2
favorite 0
comment 0
Remix of the dishwasher indicator as I wanted to do something like this for whether my cats had been fed or not. I have uploaded a stl file and a step file of it with my cats name (freddie) and some with just a blank space there if you want to write the name on there instead or have an easier time modifying it. If you have any questions or would like another file format feel free to message me or comment. Note: I haven't tried printing this yet but it should work with the original knob.
Topics: dog, thingiverse, dog fed indicator, feed, pets, Pets, dog feeder, cat feeder, stl, cat fed...
6
6.0
Apr 8, 2021
04/21
by
Glenn Grøtte (GK-3D)
data
eye 6
favorite 0
comment 0
My CatFeeder is equipped with a laser sensor that checks the food level in the food bowl. By turning the potentiometer, you change the set point of the food level inside the bowl. The first line of the display shows the current food level. The second line shows the set point you have selected. I have added the arduino nano software that I use on my CatFeeder today. I have also added a Fritzing sketch that show how to connect all the parts. All the 3D printed part you have to glue together with...
Topics: automatic_pet_feeder, feeder, pet, Pets, pet_feeder, cat, stl, arduino_pet_feeder, thingiverse,...
7
7.0
Jan 19, 2021
01/21
by
(Pelphry17)
data
eye 7
favorite 0
comment 0
** Added a splitter and more code to feed two cats at once or give each a certain amount individually. ** https://youtu.be/kgPROf2jedI Pet Feeder I control with Home Assistant. Pretty simple IOT pet feeder using easily accessible off-the-shelf parts. I have not had a jam yet. The cover/lid design is really quite piss-poor, but it works and I won't be redesigning it anytime soon. https://youtu.be/0E2c_4wviLg https://www.youtube.com/watch?v=71rNu_v0Vug https://www.youtube.com/watch?v=ektn0uY5JGM...
Topics: Homeassistant, iot, dog_feeder, pet, thingiverse, automatic_pet_feeder, pet_feeder, diy, DIY,...
7
7.0
Mar 17, 2021
03/21
by
Ian Knowles (Yenner)
data
eye 7
favorite 0
comment 0
Kitty won't eat all her kibbles because there's a hole in the middle? This cat bowl eliminates the empty bowl problem with steep sided internal walls that allow the kibbles to slide to the middle. No hole = not empty.
Topics: cat_feeder, bowls, food, not, thingiverse, pet_bowl, pet, Pets, logic, Cat_food, stl, bowl,...
12
12
Jan 13, 2021
01/21
by
Valentin Bersier (krizzli)
data
eye 12
favorite 0
comment 0
**Download version 1.5.4 or 1.5.6 of the RTCLib library on github (link in the Arduino code) since there is a bug in 1.5.5 for the time being.** It all started with the simple conclusion that I was really annoyed by my cat Mia walking on my face at 6am every day to get her morning food allowance. My girlfriend and I rescued her from a shelter and the poor thing can't self-manage the amount of food she eats, leading to a slight overweight that we are controlling with a strict diet. Since the...
Topics: thingiverse, cat_feeder, cat, fish, stl, motor, automatic_feeder, Real_time_clock, schedule, Pets,...
3
3.0
Apr 1, 2021
04/21
by
magda jaud (Magdaja)
data
eye 3
favorite 0
comment 0
This remix works togehter with the "Cat toy playing board pegs play". Use the middlepart to make the playingboard taller as you wish. Minimum for a board 4x cat_puzzle_round_v1.stl This game board for cats is a great way to keep cats busy. Just print 4 oft the stl modell an klick them together. It is supposed to be a snug fit. Then put some of your cats favorite snacks inside and watch them geting it. My cat is rather small (3kg) so you eventually need to scale the pices in slicer up:...
Topics: food, feeder, toys, cat_toy, thingiverse, customized, cat, toy, cat_feeder, board, stl, pet_food,...
5
5.0
May 1, 2021
05/21
by
David Albarracín (llanterner)
data
eye 5
favorite 0
comment 0
Esta impresión es un soporte para los cuencos vardagen de ikea. Está pensado como comedero para gatos. Al ser modular puede combinarlos como quiera. Debe tener en cuenta que hay muchos tipos de enganche entre módulos, por ello debe seleccionar los adecuados. Si he olvidado algún tipo de enganche que necesite o cree que se puede mejorar algún aspecto, no dude en dejar un comentario y gustosamente lo modificaré.
Topics: cat, thingiverse, modular, feeder, ikea_vardagen, gatos, vardagen, cat feeder, Pets, stl, cuenco,...
6
6.0
Mar 3, 2021
03/21
by
Alex Tryout (workale)
data
eye 6
favorite 0
comment 0
A dry food dispenser for cats or small animals. It is remotely programmable and you can vary the amount of food dispensed. Update 08/03/2019 updated 3D model and replaced motor mount https://youtu.be/2oAE4S7Rajo https://youtu.be/rijv9D6YWYw REQUIRED: n.2 bearing 10x15x4 https://www.banggood.com/it/10pcs-6700ZZ-10x15x4mm-Deep-Groove-Ball-Bearings-Miniature-Bearing-p-1185030.html?rmmds=myorder&cur_warehouse=CN n.1 SONOFF...
Topics: dispenser, auto_dispenser, pet_food, Pets, Cat_Feeders, pet_feeder, cat_dispenser, cat_feeder,...
9
9.0
Jan 15, 2021
01/21
by
Scotty McPherson (ScottyMakesStuff)
data
eye 9
favorite 0
comment 0
My Sisters Labrador called Sasha has been getting fat eating the cats food and the poor cats are losing weight :( Since Sasha is the leading lady in some of my productions I thought I should find a way to help her with her dieting by developing a Dog-Proof Cat Feeder! I've added a short video showing it in use here:- https://youtu.be/cVl03hrmBLQ The early prototype started well but Sasha worked out how to get the loose cap off the top so I then added a secure screw on lid. The way it works is...
Topics: feed, cat, dog_dish, dog_bowl, bowl, dog_food, thingiverse, pet_food_dispenser, Cat_food, dog,...
12
12
Jan 10, 2021
01/21
by
M Baird (Arkayic)
data
eye 12
favorite 0
comment 0
I have three cats and was trying to figure out a neat way to feed them all equal amounts and at the same time elegantly. I obtained the original concept from kitlaan and ultimately settled on using a stepper driven single auger with 2" PVC set up for three independent flow paths. I began with the Noodlepie1002 auger and removed the ends and a 1/2" core from the model. This was printed enough times to get the overall desired length. These were epoxied onto a 1/2" aluminum tube. In...
Topics: cats, feed, cat, pet, stepper, feeder, Auger, stepper_driver, thingiverse, pvc_pipe, pvc_fitting,...
7
7.0
Jan 20, 2021
01/21
by
Guillaume Rapin (swisscore)
data
eye 7
favorite 0
comment 0
A cat feeder done for my 2 cats I remplace original 13mm axis printed in PLA by a 13mm hexagonal axis (or now just some spacer M8 who have 13mm diameter I have sometimes problem with actual screw (elements and not the final screw) and will change it soon Sometimes food don't fall down, maybe with smaller food is better than mine but my cats don't like it :P I do an electronic PCB to control a relay for the motor, another relay to change rotating sens and for other things. If you want more...
Topics: catfeeder, prusa_mk25, chat, prusa_i3_mk2, PLA, petg_filament, distributeur, stl, cat_feeder, cat,...
45
45
movies
eye 45
favorite 0
comment 0
http://www.smartpetcare.sg There is nothing more worrisome for a pet owner than when they have to leave their beloved puppy or kitten at home by themselves during their nine to five work day--plus traffic--and they will only be fed before you go to work and then after you return home for the evening. Sometimes later if you have plans after work. The puppy or kitten will get hungry and restless and will probably begin to bark really loudly and some of your neighbors could possibly get...
Topics: cat auto feeder, dog auto feeder, auto cat feeder, auto dog feeder, auto pet feeder, pet auto...
