7
7.0
Jan 20, 2021
01/21
by
James Rothschild (idmimagineering)
data
eye 7
favorite 0
comment 0
This is a re-MIX of: CR-10s S5 z axis stabiliser, Frame Braces by eckeSolutions https://www.thingiverse.com/thing:2747230 Additional Parts for Assembly: 2 off 10mm Threaded Stud Bar Rod @ 1000mm long [cut to desired length] 8 off M10 [10mm] Nuts 12 off M3 10 mm Stainless Steel Allen Bolt Socket Cap Screws Hex Head 4 off M3 20 mm Stainless Steel Allen Bolt Socket Cap Screws Hex Head 16 off 20 Series European T-slot Aluminium T-Nut T Nuts
Topics: 3D Printer Parts, thingiverse, creality_CR-10_s4, CR10, stl
9
9.0
Jan 16, 2021
01/21
by
Mighty Jabba (MightyJabba)
data
eye 9
favorite 0
comment 0
I prefer to have my spool holder off to the left away from the printer's wires, but I found that when you put a full 1kg spool on it, the control box will have a tendency to tip over until some of the filament has been used. You can counteract that by placing something heavy (like another spool) on top of the box, but I decided to design this stabilizer to solve the problem. Just slide it onto the rear of the control box, avoiding the rubber feet and screws, etc. This fits my control box...
Topics: 3D Printer Accessories, thingiverse, creality_CR-10_s4, Creality_CR-10, stl
8
8.0
Jan 19, 2021
01/21
by
Stephen Middleton (Greekone79)
data
eye 8
favorite 0
comment 0
Been looking at setups for leds, And thought I'd remix this cable holder to have one included. The original stl is awesome for stock setup on CR10's and I have rocked it since setting up mine. I have not printed the upgraded version just yet but am loading it after I finish uploading. Will report with any issues. All measurements should be spot on for a set of three 10mm leds. I will post a link to the leds as well. I think I'm going to tie right into the hotend fan (12v) so leds come on with...
Topics: 3D Printer Parts, cr10s, thingiverse, creality_CR-10_s4, Creality_cr10, CR10, stl
7
7.0
Jan 20, 2021
01/21
by
junbing liang (junbing2006)
data
eye 7
favorite 0
comment 0
Fixture to stop Creality CR-10S filament sensor wobbly. Please turn the part 180 degree before slicing, make sure the surface with hole is on the bed. A 4mm hole on the filament sensor is needed. 3mm bolt and nut is expected. No support is needed.
Topics: 3D Printer Parts, Creality, thingiverse, creality_CR-10_s4, Creality_CR-10s, stl
8
8.0
Jun 20, 2021
06/21
by
Cesar Lopez (lowenski)
data
eye 8
favorite 0
comment 0
This is a replacement for the Creatily CR10 end/stop swtch board
Topics: Creality_CR-10, thingiverse, CR10, stl, 3D Printer Parts, creality_CR-10_s4
9
9.0
Jan 13, 2021
01/21
by
mike de la vega (miketribal)
data
eye 9
favorite 0
comment 0
I just added a couple supports for the upright section. Nice design, just noticed that it was bowing under the weight of some spools. So added the supports and so bowing
Topics: Creality, Creality_CR-10, thingiverse, stl, 3D Printer Accessories, creality_CR-10_s4, cr-10
10
10.0
Jan 16, 2021
01/21
by
Mighty Jabba (MightyJabba)
data
eye 10
favorite 0
comment 0
The Creality CR-10S4 (which is the larger version of the CR-10 with a 400 x 400 x 400mm build volume) has a different construction than the normal CR-10, so the large wagon-wheel-style bed adjustment knobs that are so popular with CR-10 owners won't work. Since the standard knobs are pretty uncomfortable to use, I decided to design some more comfortable ones that will fit the S4. Just remove the knobs that came with the printer and press fit them firmly into these knobs. After designing these,...
Topics: Heated_Bed, 3D Printer Accessories, thingiverse, creality_CR-10_s4, Creality_CR-10, knob, stl
8
8.0
Apr 17, 2021
04/21
by
Joshua Westerfield (jdub1981)
data
eye 8
favorite 0
comment 0
This wedge jack is a larger version with upgraded parts for large area print beds. It should be printed with a higher heat resistant material since it will remain in contact with the bottom of a heated print bed.
Topics: CR10S4, Bed Wedge, creality_CR-10_s4, thingiverse, stl, Wedge, CR-10, Creality, 3D Printer...
8
8.0
Jan 16, 2021
01/21
by
Kenneth Faaborg Schrøder (kenjano)
data
eye 8
favorite 0
comment 0
Titan Aero mount for CR-10. Remixed it, to suit my needs. Currently rev. 4 being printed, will test it soon. This is only the bracket. For the fan mount, go to the original designer. EZABL mount added, and fan nozzle hight modified. Original design was to close to the bed. Rotated it, so i print on the big flat surface. Update. It's mounted on the printer now, almost perfect. Think it's going to take a Rev. 5 at one point, but for now it's okey. Going to perform some test print's first. And...
Topics: creality_ender_4, creality_cr-10_s4, Ender_4, thingiverse, 3D Printer Extruders, stl, CR-10
8
8.0
Jan 16, 2021
01/21
by
Joshua Westerfield (jdub1981)
data
eye 8
favorite 0
comment 0
Dimensionally accurate model created with Sketchup Make 2017. Purpose of the model is to create a good starting point for others to use in creating their own mods. Individual pieces may be printed from this model if needed. The model was entirely drawn in Sketchup 2017 and I have done my best to convert it to something more usable by the community. Sketchup files arent supported by Thingiverse so here is a direct link to the file on the Sketchup 3D Warehouse:...
Topics: 3D Printers, 3d_printer, thingiverse, creality_CR-10_s4, CR10, Creality_CR-10, CR10 Printer, stl
11
11
Jan 14, 2021
01/21
by
Chris Garrett (makerhacks)
data
eye 11
favorite 0
comment 0
My X-Axis was thrown off level which made levelling the bed impossible, so I threw together these towers that fit over the bottom extrusion and allow you to lower the z to level the x-axis cross-beam. Note: Pull the plastic strips back on the bottom frame while levelling to ensure they don't throw off alignment
Topics: Creality_CR-10, thingiverse, stl, 3D Printer Accessories, creality_CR-10_s5, creality_CR-10_s4
7
7.0
Apr 18, 2021
04/21
by
Christoph Weinkum (raymax)
data
eye 7
favorite 0
comment 0
This is a nice LED Bar clip. NO SCREWS NO GLUE Just clip it in LED BAR: https://www.banggood.com/de/25CM-5W-Warm-White-Dimmable-25-SMD-5152-Super-Bright-Micro-USB-LED-Strip-Lights-p-972520.html?rmmds=search&cur_warehouse=CN And than a 2m micro USB cable If you want to support me: https://paypal.me/pools/c/84962v4zjk Please leave a comment and follow me on instagram: https://www.instagram.com/techgear3d/
Topics: creality_CR-10_s4, 3D Printer Parts, thingiverse, stl, Creality_CR-10s, Creality_CR-10, CR10,...
2
2.0
Jul 25, 2021
07/21
by
Brandon Smith (iBigNTastyi)
data
eye 2
favorite 0
comment 0
Derivative of thing:2123233 Used thing:2565204 as basis for redesign This is redesigned frame braces for the CR-10 S4. The only change was changing the angle of the threaded rod holes to account for the S4's larger Y-axis. Refer to the source thing for the rest of the parts needed, as well as full description and instruction. I've included a STEP file that includes both the S4 frame (thing:2565204) and the revised frame brace assembly positioned on the S4 frame.
Topics: thingiverse, Creality_CR-10 S4, CR10 S4, CR10S4, Creality, CR-10 S4, stl, 3D Printer Accessories,...
8
8.0
Jan 19, 2021
01/21
by
Howard Barker (HowardB)
data
eye 8
favorite 0
comment 0
Remixed this for my Creality CR-10 S4. Kudos to the original poster, Toolhashi : https://www.thingiverse.com/thing:2050079 I wanted less of an angle when mounted on the top bar, as well as a shorter space between the 2020 clip and the LED holder sections - the holder is now inline and not angled. I further resized the snap-holder portion slightly to accommodate some 12v injection molded 3x 5730 light modules. The modules measure 78mm (L) x 13mm (W) x 5mm (H). A picture of the module type is...
Topics: 3D Printer Accessories, led_mount, thingiverse, creality_CR-10_s4, 2020_extrusion,...
8
8.0
Apr 17, 2021
04/21
by
mike de la vega (miketribal)
data
eye 8
favorite 0
comment 0
A little tool holder I use for my cr10's... Still a work in progress though lol, anyhow it will hole all the tools that came with the unit. so enjoy
Topics: creality_CR-10_s4, thingiverse, stl, creality_CR-10_s5, Creality_CR-10, CR10, Creality, 3D Printer...
8
8.0
Jan 14, 2021
01/21
by
Graham Watson (graham01)
data
eye 8
favorite 0
comment 0
Extruder dust cover for the stock extruder of the Creality CR-10. Features; 1) Dust cover that allows you to still release filament while in place 2) Cable holder 3) Filament guide to avoid filament touching the z lead screw (requires piece of PTFE tube fitted as shown in the pictures) This is designed so if you really need to you can remove it while printing, but you would need to pull the PTFE guide tube slightly out the first holder so the filament can slide through the slot. I don't really...
Topics: extruder, Creality, thingiverse, Creality_CR-10, stl, 3D Printer Parts, CR-10, creality_CR-10_s4,...
10
10.0
Apr 17, 2021
04/21
by
Buscicchio Franco (Chucky01)
data
eye 10
favorite 0
comment 0
support ventilateur refroidisseur moteur pas à pas
Topics: CR10S4, cr10s, CR10_Printer, creality_CR-10_s4, thingiverse, stl, Creality_cr10, Creality_CR-10,...
9
9.0
Jan 17, 2021
01/21
by
ze kitez (zekitez)
data
eye 9
favorite 0
comment 0
This dial indicator mount for the Creality CR-10 sits 2 mm in front of the extruder casing allowing the fan to stay on. The mount is made in 2 parts which are glued together. The dial indicator is fitted to the mount which is then pushed on the extruder casing. FreeCad files are included so you can modify the parts. Dial indicators can be bought for less then 10 Euro at Aliexpress. Some dial indicators need another backplate to mount them closer to the extruder. To automate the bed-levelling...
Topics: Creality, auto, bed_leveling, thingiverse, creality_CR-10_s4, backplate, cr-10, printbed_levelling,...
9
9.0
Jan 14, 2021
01/21
by
Nelio Oliveira (zombie_smix)
data
eye 9
favorite 0
comment 0
Bed leveling knob to make the leveling process much easier
Topics: Creality, thingiverse, Creality_CR-10, 3D_Printer_Parts, stl, 3D Printer Accessories, knob,...
8
8.0
Jan 17, 2021
01/21
by
Rene Brunnbauer (RB_3D)
data
eye 8
favorite 0
comment 0
This remix supports Heavy Duty Fang or OEM fang upgrades! Base has been changed to handle a M3 screw! thanks to the original creator! great job! Follow me on YoutTube: https://www.youtube.com/channel/UCVviogcuKoMk1KSV-JvRsSw
Topics: 3D Printer Accessories, thingiverse, creality_CR-10_s4, Creality_cr10, Creality_CR-10s,...
9
9.0
Jan 14, 2021
01/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 9
favorite 0
comment 0
So I was a having an issue with the Creality CR-10 pulling over the filament spool especially when it was full into the printer! Yes big ouch so I whiped these up and while one should work, two looks cool so up t you as should you print one and let it be lonely or two so it has company. Also worth note is the size of the of control box isn't perfect (are you surprised) so I made it for 125mm therefore you might find some extra rum between the uprights and the control box so use felt dots like...
Topics: Creality, thingiverse, Creality_CR-10, stl, 3D Printer Accessories, creality_CR-10_s5,...
6
6.0
Jan 21, 2021
01/21
by
Bill Hill (hillbille)
data
eye 6
favorite 0
comment 0
This is a simple remix of cooker2003's file adding USB access where there was none before. Yes it is necessary to have the thing be wide, because of the mini SD adapter's straight in length, otherwise it would easily be broken off, just like the USB does without support. This solves both problems and is easy to print and doesn't look too bad!
Topics: 3D Printer Accessories, Creality PSU, thingiverse, creality_CR-10_s4, Creality_CR-10s,...
6
6.0
Jan 20, 2021
01/21
by
Mitch Davis (Thekakester)
data
eye 6
favorite 0
comment 0
If your filament is hitting the bed (or your part) and you need to raise it, this is a great print! No extra hardware needed. Mounts directly to extruder motor.
Topics: 3D Printer Parts, creality_CR-10_s5, filament, Creality_CR10s5, thingiverse, creality_CR-10_s4,...
11
11
Jan 11, 2021
01/21
by
Jacob Kongsø (SizZLeR)
data
eye 11
favorite 0
comment 0
This is a modded extruder bracket I made with a cable holder and expanded hole for filament input tube to be used for flex materials. In the process I added a cable holder on the side of it as the printbed on the CR-10 tends to rub against the cable when the printbed moves. In order to print flexible filaments with this, you take a piece of feeding tube (approx 10mm), stick it in the enlarged hole where the filament goes in, then cut the edge in an angle that best possible fits in between the...
Topics: Creality, thingiverse, Creality_CR-10, stl, 3D Printer Parts, creality_CR-10_s5, creality_CR-10_s4,...
9
9.0
Jan 13, 2021
01/21
by
wayne andrews (wayneuk)
data
eye 9
favorite 0
comment 0
finger tool
Topics: Creality_CR-10, thingiverse, stl, finger tool, 3D Printer Accessories, creality_CR-10_s5,...
6
6.0
Jan 21, 2021
01/21
by
pyriame caspase (Pyriame)
data
eye 6
favorite 0
comment 0
Remixed version of the chrisgeek level helpers for dual z CR-10 and CR-10 S4 or S5. improvements: -not touch the wire of the Z stopper (see picture) -does not touch the Z axis support (see picture) -allows use with frame hoses (see picture) -not necessary to remove them (see picture) Simply place on the bars sit each tower level with notch to the X. Ensure each block is sitting flat on frame railings. Enjoy.
Topics: creality_CR-10_s5, 3D Printer Accessories, thingiverse, creality_CR-10_s4, Creality_CR-10s,...
8
8.0
Apr 17, 2021
04/21
by
Jason Baker (persuadu)
data
eye 8
favorite 0
comment 0
I took the dial gauge mount from cmdctrl and made a new mount for my CR-10. You cannot take the extruder all the way down when using this, but it does allow you to see how level your bed is and what areas need adjustment. I put a rubber band on the dial gauge just because it seemed a little loose. Please feel free to revise this and make a better version. JB UPDATE, the original fan mount blocked the fan completely. I have updated a vented version that will allow the fan to breathe while you...
Topics: creality_CR-10_s4, bed_leveling, thingiverse, stl, bed_level, creality_CR-10_s5, CR-10,...
10
10.0
Apr 17, 2021
04/21
by
Kelvin A (kelvinA)
data
eye 10
favorite 0
comment 0
Not-so fast made in like 2hrs but I added a volcano hot end into the Fusion 360 file remixed from www.thingiverse.com/thing:2595304. I've also put things into components so you can toggle between the stock hotend and the volcano hotend easily.
Topics: hotend, creality_CR-10_s4, heatsink, 3D Printer Parts, thingiverse, Ender_2, stl, Creality_CR-10,...
8
8.0
Jan 16, 2021
01/21
by
Peter Pham (thatguypeter)
data
eye 8
favorite 0
comment 0
I got my CR 10 a week ago and I couldn't find any insert that would fit the CR 10. The new spindle bar is smaller I think from previous model. I try some of the design on here and it didn't fit my CR 10 Spindle. I got try of wasting filaments so I designed this myself. The insert will fit most 2lbs and 1/2 lbs filament rolls. I have most of the PLA filaments from Amazon since we are doing some testing of them for a project. It's simple and work great!
Topics: creality_CR-10_s5, 3D Printer Accessories, thingiverse, creality_CR-10_s4, Creality_CR-10, cr_10,...
7
7.0
Jan 20, 2021
01/21
by
Bill Hill (hillbille)
data
eye 7
favorite 0
comment 0
This is a work in progress. It is a re-mix using Peter Solomon's sensor, of course modified for this application. The screw holes are still there, but you will not need them as I have crudely made the two halves snap together. This thing mounts directly to your filament spool at the holder (CR-10(s) and other Creality printers and is specifically made for those spool holders. It could be modified however to work with virtually any printer which can incorporate a filament out sensor. Parts...
Topics: Creality, CR-10s, 3D Printer Accessories, filament, Creality Upgrade, thingiverse,...
8
8.0
Jan 16, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 8
favorite 0
comment 0
this is a solid case holder for a 3.5 tft screen with raspberry pi. should work with any 3.5lcd that has no mounting holes around the screen. the bottom part isn0t well palced to print, actually I'm not sure which could be the best angle, it's ur choice. this is not a work in progres, take it as is, and I hope it will suit your needs
Topics: 3D Printer Parts, Creality, thingiverse, creality_CR-10_s4, 2020_extrusion, 2020_mount, CR10,...
8
8.0
Jan 16, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 8
favorite 0
comment 0
fast made in 30 minutes, a spare hot end and a caliper, can be errors no more than 0.1-0.3mm. this was more for fun and to make more complex projects :)
Topics: 3D Printer Parts, Creality, creality_ender_2, hotend, thingiverse, creality_CR-10_s4,...
8
8.0
Jan 17, 2021
01/21
by
Antoni Lemanik (Lemonsky)
data
eye 8
favorite 0
comment 0
Filament guide designed to use with air tight storage solution (Ikea Samla 22l box) which will stand under the desk. I had problems with moisture in my filamnets, so I decided to make this air tight storage solution : https://www.thingiverse.com/thing:743280 I used feeder from this design (found a few intresting ones, but I was limited with my drill size): https://www.thingiverse.com/thing:1041635 and this lid clips: https://www.thingiverse.com/thing:393890
Topics: 3D Printer Parts, CR10_Printer, thingiverse, creality_CR-10_s4, Creality_CR-10, cr_10,...
14
14
Jan 12, 2021
01/21
by
Jacob Kongsø (SizZLeR)
data
eye 14
favorite 0
comment 0
Spool adaptor to fit the Creality spool arm to prevent the spool from tumbling and cause under-extrusion. I made this because when I adjusted my extruder steps per mm, I tested the impact of the counter drag from the spool which turned out to cause massive under extrusion. The impact was about 1-2mm of under extrusion, especially when the extruder pulls the filament enough to initiate a spool revolution but then retracts and refeed again, the spool would bounce, causing quite a pull and lead to...
Topics: Creality, thingiverse, Creality_CR-10, stl, 3D Printer Accessories, Afinibot_A31,...
10
10.0
Jan 18, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 10
favorite 0
comment 0
I've made this fan mount in remix of my double fan mount, better suitable for little printers like the ender 2. I'm at the moment using the double blower version so I havent the photos of this one. made the model for left and right blower . UPDATE (added EZABL) there are more than one model so u can choose yours. offsets for the abl are X: +/- 42.5mm Y: + 10.5mm UPGRADES: improved form and grip for the 5015 blowers. added a deeper plastic part on the right side in order to adjust better the fan...
Topics: 3D Printer Parts, Ender_2, Creality, creality_ender_2, cr10s, thingiverse, creality_CR-10_s4,...
8
8.0
Jan 15, 2021
01/21
by
Graham Watson (graham01)
data
eye 8
favorite 0
comment 0
Heavy duty E3D-v6 mounting bracket for the Creality CR-10. I designed this because the other ones just aren't solid enough. This one mounts using 3 screws, and clamps around the top of the plate for extra support. It also has a tie-wrap pillar for cable management. This is also designed so the nozzle is roughly in the same place along the z axis as the stock hotend, so no need to mess around with the z home micro-switch, but you will still need to re-level your bed. It also has 2 generic...
Topics: Creality, e3dv6, thingiverse, Creality_CR-10, stl, 3D Printer Parts, E3D, CR10S4, mount, CR8,...
9
9.0
Jan 14, 2021
01/21
by
Nelio Oliveira (zombie_smix)
data
eye 9
favorite 0
comment 0
Support for inductive sensor to be used with autobed leveling. This is for a sensor of 18mm. Links for sensor: https://www.amazon.com/LJ18A3-8-Z-Approach-Sensor-Inductive-Proximity/dp/B008FZC8F2 https://pt.aliexpress.com/store/product/M18-8mm-sensing-DC-5V-NPN-NO-LJ18A3-8-Z-BX-5V-cylinder-inductive-proximity-sensor/1162433_32719316657.html
Topics: Creality, thingiverse, Creality_CR-10, stl, 3D Printer Accessories, inductive_sensor,...
9
9.0
Jan 17, 2021
01/21
by
medhat megahed (medmega)
data
eye 9
favorite 0
comment 0
infill 100 abs
Topics: Creality, creality_CR-10_s5, Created_with_FreeCAD, thingiverse, creality_CR-10_s4, Creality_CR-10s,...
8
8.0
Jan 16, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 8
favorite 0
comment 0
update: added springcap2, should work with creality spring without problems made this feeder beacause I dont find the creality one solid or good for me,and had problem with the metal one. modified for my needs, m4 screw to adjust spring pressure, ptfe tube to avoid the lead screw, cover to improve the lever strenght and also for better cable management. not tested but should beable to print flexible filament without problems :) #parts needed: 2-m3x30 1-m3x25 1-m3x(7mm I think u can use the one...
Topics: 3D Printer Parts, MK8, Creality, creality_ender_2, flexible_filament, creality_3D, thingiverse,...
8
8.0
Jan 17, 2021
01/21
by
Ham (HamDesigner)
data
eye 8
favorite 0
comment 0
Here's one of the handiest things I have created for the CR10 so far; a set of dovetail style quick-connect fixtures for the OEM hot end and the laser engraver. One can swap between printing and engraving/cutting in a matter of less than a minute. The reason I decided to go this route instead of mounting the laser with a magnet is that I wanted the least amount of offset from the normal tool center when going between printer and laser. To use, simply turn the cam lock lever to the left to...
Topics: creality_CR-10_s5, cr10s, CR10S5, 3D Printer Accessories, CR10S4, CR10_Printer, thingiverse,...
11
11
Jan 18, 2021
01/21
by
wayne andrews (wayneuk)
data
eye 11
favorite 0
comment 0
required a mount to mount the fang on my microswiss 300 hotend also fits the stock hot end but did not want to keep removing the extruder bolts for the fang mount & come up with this .. internals need cutting out with side cutters . adjustable up & down some fangs are longer stock two screws to gantry to the left of the hot end 4 x m3 18 -20ish mm to secure the fan please note you made need to file a grove for the grub screw
Topics: creality_CR-10_s5, 3D Printer Accessories, cr1o, hictop, ender 2, thingiverse, creality_CR-10_s4,...
10
10.0
Jan 18, 2021
01/21
by
Anders Holm (FunctionalDesign)
data
eye 10
favorite 0
comment 0
Parts for better airflow when changing out fans on the CR-10. Read more about the designs and how to install them here: https://fdproj.wordpress.com/2018/01/22/cr-10-silent-new-fans-vibration-dampers-and-design-upgrades/
Topics: 3d_printer_mods, Creality, fan_duct, 3D Printer Accessories, Fan_mount, thingiverse,...
8
8.0
Jan 16, 2021
01/21
by
Bart Monnin (bmonnin)
data
eye 8
favorite 0
comment 0
Really liked JamesK1 2020 Mounted Spool Roller V2 but since I was going to be mounting it on top of my CR-10 I wanted to make sure it was a little more secure then it was in the original version. Added some side retainers so it can't slip off. Also felt rod doesn't need to be press fit on the bearings so made slightly smaller then had to adjust the rod holder so it fits tight. Update: Noticed when spool starts getting close to empty it gets pulled off the rollers pretty easy. After some thought...
Topics: creality_CR-10_s5, filament_spool_holder, 3D Printer Accessories, spool, spool_stand, thingiverse,...
10
10.0
Jan 16, 2021
01/21
by
Pierre-Henri Barbe (Petit_Homard_Breton)
data
eye 10
favorite 0
comment 0
Support for a Noctua NF-A6x25-FLX to replace one of the two fans in the bord. The other fan in the board can be replace directly by a Noctua NF-A4x20-FLX with out any support.
Topics: 3D Printer Parts, Creality, creality_CR-10_s5, cr10s, CR10S5, CR10S4, thingiverse,...
9
9.0
Jan 17, 2021
01/21
by
raffaele biasiello (RaffoSan)
data
eye 9
favorite 0
comment 0
i have really enjoied the other most used cooling duct on here, but I ended up to change often screws and parts, so I made this for better and easy use, it just slides in and stays on place, also u can reach the push fitting to add and move clips for the tube, created also an easy clip that helps the whole thing to stay more firm,but any clip will nicely work :) Summary: -duct for 40mm fan, any -changed angle to get air from the upside -easy slide mount -2nuts for the upper part for easy fan...
Topics: 3D Printer Parts, hotend_cooling, creality_ender_2, fan_duct, fan, hotend, Fan_mount, thingiverse,...
8
8.0
Mar 17, 2021
03/21
by
Pavel Prokhorov (Propan)
data
eye 8
favorite 0
comment 0
This is a special bracket for the wire harness and Bowden tube in CR-10xxx printers. Especially for the CR-10 S5 that has the long X-axis. It will prevent crashing your printing if wire harness falls down.
Topics: CR-10 S4, CR-10 S5, Creality, Creality_CR-10 S4, Creality_CR-10 S5, CR-10S, 3D Printer Accessories,...
4
4.0
Mar 22, 2021
03/21
by
Kim Nielsen (8orge)
data
eye 4
favorite 0
comment 0
This is not my design but a remix from bmonnin https://www.thingiverse.com/thing:2651501 . If you found this design very helpful or otherwise wish to buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : This design can replace the filament sensor box that came with your Cr-10/s ,be aware that it might only fit the first type of filament sensor and extruder motor , my cr-10s model is from late 2017 . I was tired of the...
Topics: Cr10s, extruder, Bracket, stl, filament_guide, creality, creality_CR-10_s4, Cr-10s, sensor, Cr-10s...
9
9.0
Jan 20, 2021
01/21
by
universe jam (universejam)
data
eye 9
favorite 0
comment 0
The original had mesh errors that caused Simplify3D to slice it incorrectly (see screenshot). I just ran it through https://tools3d.azurewebsites.net/ which fixed the problem. I haven't looked at the other original model with the shorter LED bar but if you find it has a similar problem see if the online repair works and let me know so I can tack it on to this remix.
Topics: 3D Printer Parts, Ender_2, Creality, creality_ender_2, Fang_Fan, hotend_cooling, 40mm_fan,...
8
8.0
Jan 21, 2021
01/21
by
Alan Weinstock (pyr0ball)
data
eye 8
favorite 0
comment 0
** This is version 3 of the silicone mold for the CR-10 Stock Hotend/Heatblock** After a while of printing PETG in my original hotend for my CR-10 I started having issues with heat creep and jamming, so during the process of cleaning out my hotend, I ended up swapping nozzles from the original mk8 to an E3D nozzle. Since the E3D sits much closer to the heatblock (+z of about 3.5mm), adjustments had to be made. Since my last version I've ditched Tinkercad and moved to Fusion360, so the F360...
Topics: E3D, Creality, hotend_insulation, E3D_v6, hotend, stl, silicone_sock, thingiverse,...
9
9.0
Apr 30, 2021
04/21
by
Robert Mendon (dot_bob)
data
eye 9
favorite 0
comment 0
It is a solid and easy to print spool holder for the Wanhao Duplicator 6 / Monoprice Maker Ultimate, CR-10, Tevo Little Monster, and perhaps more. Yes you read it right this spool holder works for all three printers. Come to find out all three printers use the same 30mm with 1.5 thread pitch. I couldn't find a spool holder that met all of my requirements so I built my own. My requirement were: Fit spools that were wider than 100mm. Fit spools with a spindle diameter of 31mm or greater. Print...
Topics: stl, monoprice_maker, duplicator_6, wanhao_duplicator_6, creality_CR-10_s5, creality_CR-10_s4,...
