2
2.0
May 1, 2021
05/21
by
frankie the fixer (FTF99)
data
eye 2
favorite 0
comment 0
Hey all, made a remix for the direct drive since I was using a satsana I needed to make it higher(around 5 mm) here is the result. V2 added place for cable tie. V3 added my chain link system(printing ATM 5-4-21 update end of the day) Hope you'll like it. greetings ꟻTF
Topics: stl, creality_ender_3, direct_drive_extruder, Ender3, direct-drive, ender v2, ender_3_v2, extruder,...
2
2.0
May 1, 2021
05/21
by
Joseph Kramer (revjkramer)
data
eye 2
favorite 0
comment 0
Alright so the ridiculous hot end for my KP3S broke. I had an extra hot end and extruder from an Ender 3, so I created this plate to simply bolt right on to the carriage. You may use this, change it or whatever. Please don't sell it. Please give me credit for it. If you do use this, don't forget to level your bed! You could really mess it up! Also, you might want to print this in PETG or ABS due to heat.
Topics: stl, direct_drive_extruder, kingroon_kp3s, kp3s, direct_drive, thingiverse, carriage, 3D Printing
7
7.0
Jan 18, 2021
01/21
by
Steve Gutz (s_gutz)
data
eye 7
favorite 0
comment 0
I was trying to print a lot of things on my CR-10S with NinjaFlex and got tired of it binding in the long bowden tube. Even on a normal filament I occasionally got bad prints because the tube had pushed out of the extruder for some reason. The mechanics of the Creality extruder/bowden assembly seem like a pretty poor design to me. So I started to design a direct drive system to move the extruder stepper above the hot end and limit my bowden tub to less than an inch. Though I have pretty much...
Topics: 3D Printer Parts, thingiverse, extruder, direct_drive, CR-10, stl, direct_drive_extruder
2
2.0
Apr 13, 2021
04/21
by
Eric Woowoo (Woolfys)
data
eye 2
favorite 0
comment 0
Filament Guide for Ender 5 when in Direct Drive. PLA Printing. Standard Parameters. (With Support)
Topics: thingiverse, 3D Printer Accessories, Ender5, direct-drive, direct_drive, stl, filament_guide,...
2
2.0
Jan 7, 2021
01/21
by
Umran Abdulla (umranium)
data
eye 2
favorite 0
comment 0
Remix of [JamieBK's direct drive mount](https://www.thingiverse.com/thing:4555065) that uses the dual gear drive extruder used with CR10
Topics: Ender3v2, stl, direct_drive_extruder, CR10, Ender3, 3D Printer Extruders, thingiverse, direct_drive
1
1.0
Apr 24, 2021
04/21
by
Jonathan Mercier (spool2kool)
data
eye 1
favorite 0
comment 0
A 2-in-1 upgrade for creality cr10s (and maybe others). Direct drive and auto leveling using nozzle. Uses "SIMAX3D Dual Drive BMG Bowden Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printer kit" from amazon.com:...
Topics: direct_drive, direct_drive_extruder, stl, auto_bed_leveling, thingiverse, 3D Printer Extruders
1
1.0
Nov 30, 2021
11/21
by
Aleksander Borowski (happyRip)
data
eye 1
favorite 0
comment 0
This is a mount to convert stock Biqu B1 MK8 extruder from bowden to direct drive. The conversion uses the standard hardware that came with the printer. The PTFE tubing needs to be cut to match the new location.
Topics: 3D Printer Parts, mk8_extruder, direct_drive_extruder, thingiverse, Direct_extruder, direct_drive,...
3
3.0
Mar 31, 2021
03/21
by
hochmuth maxime (Maxdarkdog)
data
eye 3
favorite 0
comment 0
__________ Please consider clicking the "I made one" button and sharing pictures of your print ^^ If you like my work give me a like, it means a lot to me. __________ Simple part to comvert the bowden to a "direct drive" (or really short bowden) Mounted on the dragchain screws Edit 21/04/2020: Added a Stronger mount
Topics: thingiverse, direct_drive_extruder, 3D Printer Parts, direct_drive, tronxy_X5S, stl, TRONXY
2
2.0
Jul 22, 2021
07/21
by
Alex Artemov (XcLxAd)
data
eye 2
favorite 0
comment 0
#This mount is designed for attaching the Voron 2.4 direct extruder to the printer Sapphire Pro Details for assembling the Voron 2.4 direct extruder are available at the [link](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Direct_Feed) The assembly instructions are available at the [link](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf)
Topics: direct_drive_extruder, Sapphire_Pro, stl, 3D Printer Extruders, direct_drive, thingiverse, extruder
2
2.0
Apr 30, 2021
04/21
by
Ammar Faridi (ammaryasir)
data
eye 2
favorite 0
comment 0
Creality direct drive upgrade with all stock parts
Topics: stl, direct_drive_extruder, Creality, upgrade, 3D Printer Parts, CR10, direct_drive, thingiverse
3
3.0
Jan 9, 2021
01/21
by
Tom Conrad (dispostar)
data
eye 3
favorite 0
comment 0
As an upgrade to the direct drive extruder conversion from Tech-tweak https://www.thingiverse.com/thing:4313820 This filament guide connects the runout sensor at the back of the Jgaurora with the direct drive extruder. Things you need: 1 piece of bowden 1 M6 or M8 or M10 bowden connector
Topics: thingiverse, jgaurora, stl, 3D Printer Accessories, direct_drive, direct_drive_extruder,...
2
2.0
Jan 5, 2021
01/21
by
damion Armour (legend_armour_)
data
eye 2
favorite 0
comment 0
This is an adaptor for people who use the creality direct drive upgrade kit, the drive is mounted abouve the hotend which makes popular coolong systems such as the bullseye impossible to use, i couldnt find anything for what i was looking for so had to design one to use on the bullseye fan duct. my problem was i couldnt mount either the stock parts cooling fan or a 5015 blower because of the stepper above the hotend so i needed something to angle away enough to add the parts cooling fan, then...
Topics: stl, 5015_blower, direct_drive_extruder, 3D Printer Parts, adaptor, bullseye, 5015_fan_duct, 5015,...
1
1.0
Dec 1, 2021
12/21
by
Benjamin Stephens (redfire417)
data
eye 1
favorite 0
comment 0
This is the bracket and shim you will need for the 3Dfused direct drive kit if you have a WINNSINN dual geared kit. https://3dfused.com/product/linear-rail-direct-drive-mount-kit/ The NEMA shim is slightly oversized for various stepper motors. I don't know if this will work with other aftermarket drive feeds. You will need additional hardware for this bracket. The grub screw is to hold the tensioner spring in place as the head on the standard screw will prevent the install of the bracket. I...
Topics: direct_drive_extruder, thingiverse, direct_drive, stl, 3dfused, 3D Printer Parts, dual_gear
1
1.0
Jan 6, 2021
01/21
by
craig lane (craigglane)
data
eye 1
favorite 0
comment 0
A drop in mount for the cr10s pro to convert from bowden extruder to direct drive. This has been designed to work with the microswiss extruder setup ment for the cr10. A few holes will need to be tapped as i didnt see the point in trying to 3d print such a fine thread. I havent tested this yet but am currently printing it in Polycarbonate right now, so if all goes well it should just drop straight in.
Topics: stl, direct_drive_extruder, MicroSwiss, CR10S_PRO, 3D Printer Extruders, thingiverse, direct_drive
2
2.0
Jun 10, 2021
06/21
by
Jordan Lambert (MacBookProAR)
data
eye 2
favorite 0
comment 0
I recently upgraded my sons Ender 3 v2 with a PrinterMods.com direct drive kit. Great kit with a few mods that we needed to make, but the one thing that didn't work quite right was the cable management. I didn't want it coming out of the front because it was a tight fit, and he wanted a extruder visualizer to fit on the front. So using the supplied connector wasn't really a great option for us. I took it upon myself to throw together a better solution that wrapped around the extruder stepper...
Topics: direct_drive, 3D Printer Parts, direct_drive_extruder, thingiverse, ender_3_v2, stl
3
3.0
Apr 2, 2021
04/21
by
Thomas Amiouny (tigertiger247)
data
eye 3
favorite 0
comment 0
This is a remix of https://www.thingiverse.com/thing:3277625 adding mounting holes to the carriage. This allows you to mount the extruder motor directly to the carriage for more reliable extrusion. I recommend switching the X stepper motor and extruder motor as the extruder motor is heavier. Pictures coming soon when I finish printing. Supports required for the fan mount.
Topics: TRONXY, Direct_extruder, thingiverse, direct_drive_extruder, 3D Printer Extruders, direct_drive, stl
2
2.0
Mar 10, 2021
03/21
by
Anthony Weidner (Antwon_Fukwon)
data
eye 2
favorite 0
comment 0
This is a combination of 2 different mounting plates that I have for the Ender 5+. This is the same width as the stock hotend mount but has the height and extra wheel from the enomaker design. I altered the original design so that the spacer included with the enomaker kit is printed into the plate for added strength, I also added a small motor support to help stiffen up the mount and hopefully reduce the ability for it to flex. Currently i have not printed or tested this part, please note that...
Topics: stl, thingiverse, direct_drive_extruder, hotend_mount, 3D Printing, ender_5, direct_drive
3
3.0
Mar 10, 2021
03/21
by
Juho Nuorala (NLAIV)
data
eye 3
favorite 0
comment 0
Original "Ender 3 Direct Drive" by Blyckert, with a little mod (chop off the overhang!) was working fine in my ender 5, but after many hours of printing, I noticed some heavy wear in the extruder parts due to the filament coming in from "odd angle" and grinding the plastic. So I decided to mod this thing a little, and add interfaces for the original PTFE-tube to fit in. Now the filament path is closer to the original bowden setup, and it's coming straight down to the...
Topics: stl, thingiverse, direct_drive_extruder, Ender_3, Ender5, direct_drive, 3D Printer Parts
6
6.0
Apr 8, 2021
04/21
by
Stephen Pellicer (spellicer)
data
eye 6
favorite 0
comment 0
Direct drive extruder with 623 Bearing idler and binder clips
Topics: MK7, 3D Printer Extruders, 623, extruder, stl, thingiverse, direct_drive_extruder, direct_drive
3
3.0
Mar 21, 2021
03/21
by
Don Brewster (Airborne_Buffalo)
data
eye 3
favorite 0
comment 0
This is a remix of a current E3D Direct Drive. This design was created to utilize some of the hardware directly from the extruder in the FolgerTech.
Topics: E3D_v6, stl, direct_drive, direct_drive_extruder, FolgerTech, 3D Printer Parts, thingiverse
1
1.0
Sep 13, 2021
09/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This is the X Endstop Version for the Ender 5 Plus with the Micro Swiss Direct Extruder Plate mounted on Linear Rail's.
Topics: stl, direct_drive, Ender5, direct_drive_extruder, thingiverse, 3D Printers, linear_rail, ender5plus
2
2.0
Apr 5, 2021
04/21
by
Nikolay Yanev (yanew)
data
eye 2
favorite 0
comment 0
Direct Drive Extruder for Anet ET4 Several new bolts are needed M3x30mm 2pc for motor, M3x14-15mm 1pc for extruder handle, M3x12 1pc + nut for shroud and new part. It is a good idea to first print "Direct Drive I" and make the printer direct drive and then print "Direct Drive II" gcode file. For maximum strength and elimination of the bending of the part when motor pushing filament, the top and bottom layers are 6 each and the lines of the layers must be oriented vertically....
Topics: thingiverse, et4, anet, stl, direct_drive, direct_drive_extruder, 3D Printer Extruders, anet et4...
1
1.0
Jan 19, 2022
01/22
by
David Scheimeyer (WhiteDelta3)
data
eye 1
favorite 0
comment 0
An easy direct drive mod for the tronxy x5sa pro mod, that should be able to be printed by everyone. No special parts or srews needed, you can use all the srews from the old installation otherwise tronxy had gave me enough spare srews so i was able to mound the mod. I hope there is enough space, to install any kind of filemant cooling mod, because you need one if you still use default.
Topics: thingiverse, direct_drive, tronxy_x5sa_pro, 3D Printing, stl, TRONXY, direct_drive_extruder
2
2.0
Mar 19, 2021
03/21
by
Jorge Jané (Flisgut)
data
eye 2
favorite 0
comment 0
If you like the minimalist beauty of your Ender 3, you have 4 hours to print the support and the drilling template, you have two DIN 912 M4 x 20mm screws with their corresponding nuts, this is your direct drive system. in half an hour you will have it working. You don't need any more instructions (I don't want to hurt your self-esteem). Thanks, Enjoy!
Topics: direct_drive, Ender_3, direct_drive_extruder, thingiverse, 3D Printer Extruders, extruder, stl
2
2.0
Jan 9, 2021
01/21
by
Simon Bruheim (CptShadows)
data
eye 2
favorite 0
comment 0
The bantam feeder is taller, so the tube went into the hotend at an angle. This should make it go pretty straight in, plus it's got more wiggleroom in terms of tube length. I found it was pretty frustrating to have the mount be just too long/short constantly. I would suggest printing it in the orientation that it shows up in your slicer, with supports (only touching build plate). And of course press the metal spacers for the wheels into the two big holes, they shouldn't be loose. Make sure...
Topics: thingiverse, stl, bantam_feeder, 3D Printer Parts, direct_drive, direct_drive_extruder, bantamfeeder
2
2.0
Jun 10, 2021
06/21
by
(foureight84)
data
eye 2
favorite 0
comment 0
Inspired by a design by [@calvin_megazero](https://www.thingiverse.com/thing:4841439) for a direct drive mount. This should be compatible with [@calvin_megazero](https://www.thingiverse.com/thing:4771559)'s remix for the [Petsfang fan assembly](https://www.thingiverse.com/thing:4771559). Use 2 M3 screws and nuts to secure Sherpa Mini to mount. I believe M3x8mm or M3x10mm will work. To secure the mount to the plate, a 2mm width zip tie should work. Print with the part on its side in order to not...
Topics: direct_drive, MegaZero, Sherpa_Mini, direct-drive, Sherpa, direct_drive_extruder, 3D Printer Parts,...
2
2.0
Jan 6, 2021
01/21
by
Shahan Subzwari (shahan)
data
eye 2
favorite 0
comment 0
Direct Drive Extruder mount for Eryone ER20 Print Settings: 4 to 5 Walls 4 Top 4 Bottom 20 % infill Extra part needed will be longer stepper motor cable like this https://amzn.to/39IUygt or Extrudermotor extension cable like this https://www.aliexpress.com/item/4000783917698.html?spm=a2g0s.9042311.0.0.2d934c4d95p7bx Watch YT Video for details: https://youtu.be/lfw_7Uaqxxc Fan mount https://www.thingiverse.com/thing:4128675 Extruder Motor rotation https://www.thingiverse.com/thing:2638857 Enjoy !
Topics: stl, direct_drive_extruder, Eryone_Thinker, Direct_extruder, 3D Printer Parts, eryone_thinker_SE,...
2
2.0
Mar 15, 2021
03/21
by
Luca Di Giorgi (DiJo)
data
eye 2
favorite 0
comment 0
Upgrade for Eryone Thinker SE to mount the Direct Drive with oversized fans and BL-Touch. Cooling conveyor redesigned to have greater effectiveness and to accommodate a 50x15 fan. HotEnd cooling fan of 40x10 (but can also mount 40x15 or 40x20). Fixed extruder lever with modification to facilitate the insertion of the filament and to remove the fitting on the PTFE hotend, in this way any slipping of the PTFE inside the hotend is avoided. Autodesk 3D link to the project...
Topics: direct_drive, thinker, thingiverse, 3D Printer Accessories, direct-drive, direct_drive_extruder,...
2
2.0
Mar 5, 2021
03/21
by
Michael Hedges (M_pro)
data
eye 2
favorite 0
comment 0
An update to Dabinielson direct drive mount. Updates Changed direction of mount and modified size for BMG Extruder
Topics: bgm2208, bondtech_bmg, stl, 3D Printer Accessories, direct_drive_extruder, direct-drive,...
2
2.0
Jan 8, 2021
01/21
by
Misa Abwesend (Ascardia)
data
eye 2
favorite 0
comment 0
This thing is especially for an Ender3 V2 with: - Micro-Swiss Direct-Drive and Micro-Swiss all-metal hotend - 22mm "pancake" stepper motor attached to the extruder (Nema17 by bondtech in my case) - using this chains https://www.thingiverse.com/thing:3715002 by diogosantos88 - and the other X-axis mount https://www.thingiverse.com/thing:4316238 by Tobi0892 It may fit other setups / printers too but that is untested. Base idea and STL was https://www.thingiverse.com/thing:4130031 by...
Topics: cable_chain, dragchain, stl, direct_drive_extruder, MicroSwissDirectDrive, Ender3, Ender_3,...
2
2.0
Jul 3, 2021
07/21
by
Roy Berntsen (3D_PRO)
data
eye 2
favorite 0
comment 0
# Triquetra All in One 3D Printer Tool Head - X Carrier for MGN Rails and for V-Wheels - Direct Drive or Bowden For A360 3d model: https://a360.co/3rQP7m2 For all updated files: https://github.com/RoyBerntsenDesign/Triquetra/releases/tag/v1.0 For the Mjølnir DD Extruder: https://github.com/RoyBerntsenDesign/MJOLNIR-Extruder/releases/tag/1.1 If you want to support the development - consider becoming a patreon or supporting buying a coffee: https://www.buymeacoffee.com/pro3d...
Topics: mjolnir, direct_drive, 3D Printers, direct_drive_extruder, thingiverse, stl, Triquetra,...
7
7.0
Jan 18, 2021
01/21
by
Josh Arehart (SvnoyiWaya)
data
eye 7
favorite 0
comment 0
This is my WIP open source solution for remote direct drive extruders. While I am prototyping in PLA, more robust materials would be better suited. The files for shafts have hexagonal material near the botom, solely to promote adhesion. you will need a 5mm shaft/bolt shaped like a nema 17 shaft to attach to the spur gear and for mounting te drive gear. I will update the files and create a comprehensive BOM as I go. Thank you for taking a look!
Topics: opensource, lightweight, thingiverse, extrusion, extruder, direct_drive, 3D Printer Extruders, stl,...
4
4.0
Mar 22, 2021
03/21
by
dennis prijs (Kaas205)
data
eye 4
favorite 0
comment 0
This is a printed direct drive adapter using all the original bolts except 2 M3x23 (can be a bit longer or shorter). I printed all these parts in PRUSA PETG with 40% infill and 4 perimeters. If u want to print at full height u will need to make the extruder cable longer.
Topics: stl, 3D Printing, direct_drive, direct_drive_extruder, creality_ender_3, Ender_3, thingiverse
2
2.0
Jun 10, 2021
06/21
by
Infill 3D (Infill3D)
data
eye 2
favorite 0
comment 0
Here is the Infill 3D direct drive extruder for our i3R in 1.75mm, sorry I do not have an assembled version of it to take pictures as you can guess from my previous post I prefer geared extruders however when I started into 3D printing the first thing I did is ditch the Wade extruder and build this direct drive I used it for quite a while it served me well however as all direct drives they do not do so well with irregular diameter filament, every time I ran into a problem I blamed the hotend...
Topics: direct_drive, thingiverse, Infill_3D, 3D Printer Extruders, extruder, Infill_3D_Direct_Drive, stl
1
1.0
Apr 19, 2022
04/22
by
Onur YAZICI (afterdarq)
data
eye 1
favorite 0
comment 0
Direct Drive (BMG & BMG clones compatible) setup for CR10-Smart
Topics: 3D Printer Parts, thingiverse, BMG_clone, direct_drive, BMG, cr10smart, direct_drive_extruder, stl
2
2.0
May 21, 2021
05/21
by
Edward Webber (Domush)
data
eye 2
favorite 0
comment 0
Requires two 5015 fans. Everything else is stock. Optional BLTouch Optional LED strip
Topics: direct_drive, 3d_printer, direct_drive_extruder, thingiverse, Ender_3, 3D Printer Accessories, stl
2
2.0
Mar 31, 2021
03/21
by
justin garriott (Pisces_Printing)
data
eye 2
favorite 0
comment 0
For use with "ModelStation" "Cable Chain" thing:11978. I used this on my modified ender 3 pro. Due to the direct drive moving the extruder cable, and discarding the bowden tube. I had the hot end cable and the extruder cable dangling. using these brackets, the bottom one attaches to the underside of the center rail and extends just past the rear most stepper motor(Y Stepper). while the upper bracket attaches to the back of the cross rail(x axis) that the hot end travels left...
Topics: Ender_3, thingiverse, direct_drive_extruder, direct_drive, 3D Printer Accessories, stl, cable_chain
3
3.0
Mar 20, 2021
03/21
by
Brad B (Vl4dim1r)
data
eye 3
favorite 0
comment 0
This is the new version of my model here: http://www.thingiverse.com/thing:459244. My printer had trouble printing the fan grill vertically, so I split it into 2 parts, attached via mounting rail. I still need to model up the ultrasonic attachment with the H-rail slot. This model will be used for my future mods as well, including an LED ring for the extruder head, a webcam mount, and a directional cooling fan.
Topics: direct_drive, prusa_i3, direct_drive_extruder, thingiverse, extruder_mod, mk7, 3D Printing, stl
8
8.0
Apr 24, 2021
04/21
by
Captain Serial (captainserial)
data
eye 8
favorite 0
comment 0
This is a [Tinkercad hack](https://tinkercad.com/things/6PGVzFZcYT3) to allow any heater block configuration or orientation to be used with Jasonatepaint's excelled direct drive extruder for E3Dv2 and Ultimaker 2. I find that I cannot use the fans at 100% with this hack, so I stay below 60%, especially if going above 235C. 15% is what I use most of the time, but I eagerly await the [official solution to this problem](http://www.soliforum.com/post/122159/#p122159): 
