Topics: Youtube, video, Gaming, Fanatec, Fanatec: ClubSport Steering Wheel F1® Esports V2, обзор на...
0
0.0
Mar 10, 2022
03/22
Mar 10, 2022
by
Yasen Nichev (yasenyasen)
data
eye 0
favorite 0
comment 0
I have upgraded my Longer LK4 Pro with Micro Swiss Direct Drive Extruder. The filament guide provided by Micro Swiss was for Ender 3 and there was no way to attach my Longer filament runout sensor. I tried searching for such part on Thingiverse, but I couldn't find anything, so I made one. This filament guide uses M6 connector with some PTFE tube to guide the filament to the sensor and it uses the stock micro swiss connector on the other end. It just goes straight to the extruder without...
Topics: 3D Printer Parts, thingiverse, micro_swiss, filament_guide, direct_drive, Longer_LK4_Pro,...
0
0.0
Mar 10, 2022
03/22
Mar 10, 2022
by
Petr Tvarog (Chodec)
data
eye 0
favorite 0
comment 0
Compact direct drive for Ender 5 and derivates. It is designed for E3D V6 with the BMG extruder and pancake step motor. BLTouch holder is also included. Duct is ready for radial blower 5015. Due to belt hold system at the Ender 5 only fan 4010 is possible to use. Klipper users also can use plate for ADXL345 accelerometer. Note: This design is prepared for Trianglelab components, ie. BMG v2 clone, E3D V6 clone, Extruder motor. Other types may need to be modified. BLTouch offset: X-28.5 mm Y-28.5...
Topics: 3D Printer Parts, thingiverse, Ender5, DDE, compact, stl, bmg clone, direct drive
1
1.0
Mar 8, 2022
03/22
Mar 8, 2022
by
Erika Schade (erkschade)
data
eye 1
favorite 0
comment 0
This is a modification for the " onodono" design -link below, but with more mounting holes a thicker base for the BL touch and moved the stiffener to the bottom to make space for the mounting holes.
Topics: 3D Printer Parts, thingiverse, stl, direct_drive_extruder, ender 3 v2, Ender_3
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
William Chen (wctt)
data
eye 0
favorite 0
comment 0
This is a modified extruder arm/base with a cable holder integrated for direct drive conversions. This is mainly for the Speed Drive conversions: https://www.thingiverse.com/thing:3816051 I had my doubts as to how long this would last, but I printed it in 100% infill and it has held up with lots of printing for the last 2 months so far. :)
Topics: thingiverse, extruder, direct_drive, CR-10, 3D Printer Extruders, stl, Ender_3
0
0.0
Mar 5, 2022
03/22
Mar 5, 2022
by
Mac Andy (macandyoutdoors)
data
eye 0
favorite 0
comment 0
Remixed from https://www.thingiverse.com/thing:4746141 , for use with ender 3 direct drive Kit: https://smile.amazon.com/dp/B0824ZQ3D1/ref=cm_sw_em_r_mt_dp_GN89NE54BC612JW12PST that has a different V-Slot Backplate A crude version 2.2 is coming, printing the prototype
Topics: Fan_Housing_V2, hotend_cooling, Ender_3, 5015_fan_duct, thingiverse, 5015_blower, 3D Printer Parts,...
0
0.0
Mar 4, 2022
03/22
Mar 4, 2022
by
Greg Flynn (GregGFlynn)
data
eye 0
favorite 0
comment 0
This is a remix of the Drivinator and one or two more, designed to work with the dual gear BMG style extruders, and I added a mount point for BL Touch style ABL probe (I used to have the 3D Touch probe installed until my BTT SKR Mini E3 V2.0 died and I had to switch back to my original Creality board). You will have to extend the stepper motor wires. The stepper motor mounting holes are slotted so the short PTFE tubing doesn't have to an exact size, just make sure the ptfe tube is long enough...
Topics: BL Touch, thingiverse, direct drive, 3D Printer Extruders, stl, Ender_3
0
0.0
Mar 4, 2022
03/22
Mar 4, 2022
by
Micro Swiss Support (MicroSwiss)
data
eye 0
favorite 0
comment 0
Fan Shroud Adapter and PTFE Guide Tube Bracket used to install the Micro Swiss Direct Drive Extruder kit on an Ender 3 Max. The PTFE bracket will align the PTFE tube with the Ender 3 Max filament runout sensor.
Topics: Ender, fan_shroud, shroud, thingiverse, micro_swiss, 3D Printer Parts, swiss, direct_drive,...
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Maurizio Gambo (MauriMulon)
data
eye 0
favorite 0
comment 0
I was wondering to put a dual drive gear extruder on my Prusa Mini, there are already several models but no one with integrated filament sensor. I retrived few pictures from bondtech about the IF sensor arrangment then I build my version. Onother target was to make an easy replacment without buying additional parts as teflon pipe, threaded joint, and so on. I used only a threaded insert for the holder retainer but I make available also the version for the nut. I bought a 20€ dual gear...
Topics: 3D Printer Parts, thingiverse, filament, extruder, sensor, direct_drive, drive, bondtech, dual,...
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Glen Harris (astfgl)
data
eye 0
favorite 0
comment 0
The parent part was not manifold and had some gaps and separation when sliced. I imported the STL into a CAD program and filled the gaps. The H2 silicon sock was interfering with part of the bracket, so I trimmed that down as well.
Topics: thingiverse, stl, mount, 3D Printer Extruders, direct_drive_extruder
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Christoph Weber (Chris48Du)
data
eye 0
favorite 0
comment 0
Für weitere Infos bitte beim Original ohne Bltouch nachsehen. https://www.thingiverse.com/thing:4950260 Hier alle Stützen blocken ausser bei dem Überhang vom Bltouch. Mein Offset ist : X-2.00 Y-25.00 Z-1.75 mit einer Feder, die fest sitz. Funktioniert mit der FW von Knutwurst einwandfrei.
Topics: 3D Printer Parts, i3Mega, thingiverse, direct_drive, XCarriage, Anycubic_I3_Mega_Mod, mk4,...
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Micro Swiss Support (MicroSwiss)
data
eye 0
favorite 0
comment 0
Fan shroud and probe mount for printers: Creality CR-10S Pro V2 Creality CR-10 Max Extruder Kit: Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (SKU: M2601) *Print Settings* Material: PETG Supports: Build Plate Only Infill: 20% *Specific parts the fan shroud was designed for* Extruder: Micro Swiss CR-10 Direct Drive Hotend: Micro Swiss CR-10 All Metal Hotend (4 finned cooling block) Part Cooling Fan: 4020 Blower Hotend Fan: 4010 Probe: BL Touch
Topics: shroud, 4010_fan, stl, 40mm_fan, fan_shroud, 3D Printer Parts, micro_swiss_hotend, Creality,...
0
0.0
Feb 22, 2022
02/22
Feb 22, 2022
by
Chris (Proper_Chopper)
data
eye 0
favorite 0
comment 0
Hier ein schraubbarer Filamentguide...perfekt um Filament aus einem Regal oder ähnlichem zum Extruder zu leiten.Egal ob Direct Drive oder Bowden Danke an Pini für den geilen Probedruck und die schönen Fotos :-) Sunlu PLA Carbon Fiber Easy to print Update:2.Version hinzugefügt die die Spannweite von ca 45mm auf 55mm erhöht (Bottom long)
Topics: thingiverse, filament, filament_guide, 3D Printer Accessories, easy_to_print, bowden_hotend,...
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Wolfgang Ley (Basteley)
data
eye 0
favorite 0
comment 0
Now I reached the very best quality with this inexpensive printer (120€ in 2021). After some improvements like taking the stock parts to covert into directextruder. Because of the more weight on the x-Axe now - printhead and extruder with its steppermotor. At first I decided to add a second z-spindle-axe so I reached no bending down on the right side. And from now on the filament comes from above and the movement - right and left - of the printhead brings me the sorrow the filament could...
Topics: TRONXY, thingiverse, filament, Tronxy xy2pro, direct_drive, direct_drive_extruder, Direct_extruder,...
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Angel Loza (LoZa)
data
eye 0
favorite 0
comment 0
It is a remix of the orbiter extruder for the kingroon KP3s, **https://www.thingiverse.com/thing:5236533** In this case the housings have been adapted for **block type H** -------------------------------------------------------------------------------------------- Este es un remix del extrusor orbiter para la kingroon KP3S, **https://www.thingiverse.com/thing:5236533** En este caso se han adaptado las carcasas y tope final de carrera para **patín tipo H**
Topics: Orbiter_V15, kingroonkp3s, upgrade_Kingroon_KP3, stl, E3D, Extrusor_directo, direct, e3dv6,...
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Carsten Kliebe (Gainax0815)
data
eye 0
favorite 0
comment 0
Ender 6 direct drive mont.
Topics: thingiverse, direct_drive, dice, BMG, bondtech_bmg, Creality_Ender_6, direct_drive_extruder,...
0
0.0
Feb 20, 2022
02/22
Feb 20, 2022
by
Chauncey (ACE9708)
data
eye 0
favorite 0
comment 0
Filament sensor relocating mount after doing a direct drive conversion.
Topics: 3D Printer Parts, thingiverse, Voxelab_Aquila_X2, direct_drive, Aquila_x2, Filament_Sensor, stl,...
0
0.0
Feb 20, 2022
02/22
Feb 20, 2022
by
Proper Chopper (Proper_207)
data
eye 0
favorite 0
comment 0
Hier meine Mod aus MK4 X Carriage und E.V.A. Carriage adaptiert an einen NF Sunrise Direktextruder... Der PCB Halter ist noch in Arbeit....natürlich gehts auch ohne PCB bei direkter Verkabelung Quelle: MK4 X Carriage und E.V.A Carriage https://main.eva-3d.page/ Proper_Chopper
Topics: thingiverse, mk4, stl, Anycubic, Anycubic_I3_Mega, NF_Sunrise, 3D Printer Extruders,...
0
0.0
Feb 20, 2022
02/22
Feb 20, 2022
by
Angel Loza (LoZa)
data
eye 0
favorite 0
comment 0
To download all project click in this link https://www.thingiverse.com/thing:5254723/zip Ender 3 Ender 5 Direct Drive Orbiter extruder V6 ================================ Lista de materiales: -------------------------- • 1unidad – Orbiter Extruder 1.5 Right Fysetc https://s.click.aliexpress.com/e/_APAz8n Trianglelab https://s.click.aliexpress.com/e/_AWKhiF • 1 unidad - Hotend V6 https://s.click.aliexpress.com/e/_A75843 • 60-70 mm -- PTFE Capricorn...
Topics: Ender, Orbiter_V15, 3D Printer Extruders, creality_ender5_plus, Ender_direct, stl, Ender_Extender,...
0
0.0
Feb 19, 2022
02/22
Feb 19, 2022
by
Nils De Laeter (nalmie)
data
eye 0
favorite 0
comment 0
extruder mount for standard ender extruder to be used with briss fang and noctua 40x20mm fans share your thoughts, give me shout if you like it, and enjoy the print and upgrade.
Topics: Briss, thingiverse, creality, extruder, fang, noctua, silent, Noctua_Fan_40mm, upgrade,...
0
0.0
Feb 18, 2022
02/22
Feb 18, 2022
by
Reginald Spear (Bigwumpus)
data
eye 0
favorite 0
comment 0
Summary This is a filament lead in tube (Bowden) end holder for Ender 5 Plus direct extrusion modifications. It is designed to hold the end of the filament lead in tube from the filament break detector to the direct extruder. The filament bracket installs in the place where the original extruder was.
Topics: thingiverse, 3D Printer Accessories, stl, Filament_bracket, direct_drive_extruder
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
William Chen (wctt)
data
eye 0
favorite 0
comment 0
This is a modified version with a stronger part which clips to the metal plate and also an easier print on it's side with less supports needed.
Topics: thingiverse, direct_drive, CR-10, cr10v2, 3D Printer Extruders, stl
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
James Konidis (jameskreate)
data
eye 0
favorite 0
comment 0
Made an adapter to attach to hot end enclosure to guide the filament directly from the extruder to the hot end. 2/17/22 Made a change! First model was a little off.
Topics: 3D Printer Parts, thingiverse, direct_drive, Aquila, adapter, stl, VOXELAB
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Dave Arsenault (Ghrayfahx)
data
eye 0
favorite 0
comment 0
I have been using the wonderful mount by Chris_Neale at https://www.thingiverse.com/thing:4683117 but wanted to switch to a Voron style blower and found the mount wasn't tall enough to clear the housing. I also cut a hole in the side because I have my motor mounted sideways and the original didn't have a spot for the cable to pass through in that orientation. Edit: I had to move some bits around but this should fit much better now. It also allows you to slip it onto the motor since I cut the...
Topics: 3D Printer Parts, smartfilamentsensor, thingiverse, Smart Filament Sensor, BTT, direct_drive,...
0
0.0
Feb 16, 2022
02/22
Feb 16, 2022
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
This is the extended version of my adapter for the BIQU H2 that lets you replace the 35mm heatsink fan with a 40mm one (4010 or 4020). This is designed to work with my H2 mount (https://www.thingiverse.com/thing:4893522) and is compatible with The Claw fang duct (https://www.thingiverse.com/thing:5202213). This adapter is only really needed if you want to run a quieter fan or need more cooling if running very high nozzle temperatures, otherwise you should stick with the 35mm fan. Depending on...
Topics: fang duct, heatsink fan, TheClaw, Bigtree, stl, 4020 fan, 3D Printer Parts, 4010 fan, extruder fan,...
0
0.0
Feb 16, 2022
02/22
Feb 16, 2022
by
Wolfgang Grebe (docwoelle)
data
eye 0
favorite 0
comment 0
This is a Filament Guide with Runout Sensor for Ender 3 with Direct Drive. Additional parts: 1x 608 Bearing 1x M3x20 (if not available, instead you can use bearingSub_pin) Print: 2x Spacer 1x RunoutSensor 1x Ring (if no screw M3 available: print bearingSub_pin) Put the ring and the two spacers on a 608 bearing. Mount it to the arm with a M3x20 screw or the pin. Add a microswitch (19.7 x 10.6 mm) to the sensor mount.
Topics: 3D Printer Parts, thingiverse, filament_guide, direct_drive, filament_runout_sens, stl
0
0.0
Feb 15, 2022
02/22
Feb 15, 2022
by
Cad AxeDesign (CadAxe)
data
eye 0
favorite 0
comment 0
Print as you like, I recomend PETG or PLA+ no support required
Topics: 3D Printer Parts, thingiverse, extruder, SUNLU-S8, direct_drive, sunlu, direct_drive_extruder,...
0
0.0
Feb 15, 2022
02/22
Feb 15, 2022
by
Cad AxeDesign (CadAxe)
data
eye 0
favorite 0
comment 0
Print as you like, I recomend PETG or PLA+ no support required
Topics: 3D Printer Parts, thingiverse, extruder, SUNLU-S8, direct_drive, sunlu, direct_drive_extruder,...
0
0.0
Feb 15, 2022
02/22
Feb 15, 2022
by
Lukáš Fidler (geoluki)
data
eye 0
favorite 0
comment 0
Heatsink and model fans for stock CR10 V2/V3 hotend with light bar. I used all stock from printer, just you have to buy holder for heatsink: https://www.aliexpress.com/item/1005003751782358.html?spm=a2g0o.9042311.0.0.26674c4dQSv0a5
Topics: cr10v2_direct_drive, 3D Printer Parts, cariage, thingiverse, hotend, cr10v3, CR10V2_BLTouch,...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
Daniel Pipe (Husker83)
data
eye 0
favorite 0
comment 0
This is a bunch of remixes so that the Ender 3 can have everything I wanted at the same time: 1. A good fan duct that can hold 2x 5015 fans. I've tried others and they where too flimsy 2. A direct drive extruder using stock parts only 3. A drag chain for X as I had failed prints due to cables binding 4. A CR/BL touch mount (this mounts either) 5. An LED light 6. Threaded inserts - not self-tapping screws into plastic The downside of this is that you reduce the X-axis to 188mm, 20mm is due to...
Topics: crtouch, 3D Printer Parts, thingiverse, dragchain, BL_Touch, direct_drive, CableChain,...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
Angelo Storino (SinththeSphinx)
data
eye 0
favorite 0
comment 0
This is my first public model! I created this bumper because the Microswiss Direct Drive kit doesn’t have a tab to hit the X endstop on my Aquila X2, and when you home your printer, it will strain itself being unable to reach the end stop switch due to the belt housing. I saw some people solving this by taking off the belt housing on the left side, but I thought there should be a better way. No extra mounting hardware needed! Utilizes the original 2 self tapping nozzle shell housing screws...
Topics: Voxelab_Aquila_X2, microswiss_dd, x_endstop, bumper, stl, 3D Printer Parts, MicroSwitch_Bracket,...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
Chad Brandenburg (BreeOge)
data
eye 0
favorite 0
comment 0
This is a project I am currently working on. After looking and looking I could not find a TRUE DIRECT DRIVE setup for a Geeetech with BMG and E3D V6, So I am making one. I should have this done in the next week, and once I do a few test prints to make sure its all good, I will post the files. I am currently posting the pictures to let people see what I have so far. Let me know if you would be interested in this, thank you. This will be a True Direct Drive, you will attach the E3D V6 to a BMG or...
Topics: Geeetech_A30M, BMG_clone, 5015, geeetech_a20, geeetech_A30, geeetech_A10M, bondtechbmg, stl, a30,...
0
0.0
Feb 13, 2022
02/22
Feb 13, 2022
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
A low profile adapter (5mm tall) for the BIQU H2 to lets you replace the 35mm heatsink fan with a 40mm one (4010 or 4020). This is only really needed if you want to run a quieter fan or need more cooling if running very high nozzle temperatures. Depending on your setup and which fan you go with, you may lose some x travel to the left. Be sure to make adjustments to maximum x travel and your probe offset in your printer's config. Firmware Notes -------------- • 4010 users should subtract 5...
Topics: BIQU H2, Ender_6_mod, thingiverse, TFT35, 3D Printer Parts, Ender-6, BTT, heatsink fan, 4010 fan,...
0
0.0
Feb 13, 2022
02/22
Feb 13, 2022
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
Simple hole covers if you've removed the spool holder and extruder from your Ender 6. I use them since I have my filament runout sensor relocated inside my case and I use a reverse Bowden tube out the sensor's wire hole to a drybox. If you want, you can buy me a coffee at https://ko-fi.com/vampyrex13
Topics: dry box, thingiverse, Ender_3, Ender-6, Ender6, reverse Bowden, 3D Printer Accessories, Creality...
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Kirill Kuznetsov (dr_agon)
data
eye 0
favorite 0
comment 0
# Direct drive solution for Briss Moto fan duct using Orbiter v1.5 extruder I use [BrissMoto fang duct v4.4](https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang) on my two Voxelab Aquilas. I was unsatisfied with my [previous direct drive mount](https://www.thingiverse.com/thing:5214793), so I've decided to research what I can implement there and how to improve the extruder solution drastically. I came up with this idea. It uses an Orbiter v1.5 with a custom housing to...
Topics: thingiverse, Orbiter_V15, Briss_duct, direct_drive, Voxelab_aquila, 3D Printer Accessories,...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
David DD (D3Dorsett)
data
eye 1
favorite 0
comment 0
This is an improvement to my previous direct drive extruder for the ZYLTech Gear and probably the Two Trees BLU series. (The factory mount of the printer is posted as well, so you can compare it to your printer.) This mount will work with the factory hotend or upgrade to 5015 blower fans. The other main feature is a mount for a new hotend, like the Dragon, Mosquito or any other v6 round hotend. Also included is a 30mm fan duct or 40mm fan duct for the hot end. Finally, with a end-stop switch...
Topics: 3D Printer Parts, thingiverse, zyltech, twotreesbluer, direct_drive, direct_drive_extruder,...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Ulrich Lachmuth (UliLac)
data
eye 1
favorite 0
comment 0
When I tried the original model "for size" I found two issues - one, the filament path was off a few mm, two, my BMG all metal clone wouldn't fit because the filament guidance channel had no place to go (that black round thingy provided to screw a PTFE retainer in). I couldn't leave it off 'cause without it the PTFE would not have any guidance at all on the upper end, which is bad. So here's my remix of asd913's remix adressing the issues. Changes to the original model: - made room...
Topics: 3D Printer Parts, BMG all metal, thingiverse, direct_drive_extruder, drivinator,...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Bernat Sempere (bsemp86)
data
eye 1
favorite 0
comment 0
My BMG had the lever on the other side and the original part didn't fit. I printed it using PETG and is working briliantly. It is mounted using a pancake motor to lower overall weight.
Topics: 3D Printer Parts, thingiverse, BMG_clone, direct_drive, BMG, direct_drive_extruder, ender_3_v2, stl
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Joshua Macdonald (Musuhc)
data
eye 1
favorite 0
comment 0
This will retain the use of a the Steel BL Touch Kit from Creality, this will probably work with a CR Touch kit as well that uses the steel mount. This will work with the stock cooling setup or this mini satsana remix as pictured. https://www.thingiverse.com/thing:5239079
Topics: 3D Printer Parts, thingiverse, BL_Touch, direct_drive, Ender_3_Pro, stl, Ender_3
1
1.0
Feb 8, 2022
02/22
Feb 8, 2022
by
Cooper Croteau (CoopaLoopa72)
data
eye 1
favorite 0
comment 0
Remixed the holder to work with a Creality CRTouch insted of a BLTouch. The connector is in a different place and was blocked by the original support. You can use the M3*6mm screws that come with the CRTouch and screw them directly into the mount from the bottom just like the factory mounts (holes are 2.6mm for a self tapping fit, you may need to adjust your hole size offset in your slicer or drill out the holes if you are having issues).
Topics: crtouch, 3D Printer Parts, thingiverse, crtouch_mount, direct_drive, BMG, crtouch_holder, stl,...
2
2.0
Feb 8, 2022
02/22
Feb 8, 2022
by
Sorin Borcea (SorBor)
data
eye 2
favorite 0
comment 0
After upgrading my Ender 3 printer with direct drive extruder, it became difficult to use the filament runout sensor, because the wiring interfered with the print. After searching for a solution, i came over a review of the new Ender 3 S1. This one is already upgraded just like my printer and there was the filament runout sensor mounted on top of the printer. I liked that idea and i designed an articulated bracket that allow mounting the runout filament sensor on top of the printer, aligned...
Topics: sensor_mount, thingiverse, Filament_Sensor, filament, sensor, direct_drive, 3D Printer Accessories,...
1
1.0
Feb 7, 2022
02/22
Feb 7, 2022
by
Angel Loza (LoZa)
data
eye 1
favorite 0
comment 0
To download all project click in this link https://www.thingiverse.com/thing:5127150/zip Kingroon KP3S Direct Extruder Orbiter+V6 ================================ En los archivos adjuntos encontrareis las instrucciones de montaje, así como el Marlin 2.0.9.2. El Firmware esta compilado para el chip SMT32F1, si tu kingroon es el último modelo necesitas compilarlo para la versión SMT32F4 (mks_robin_nano_v1_3_f4) Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for...
Topics: kingroonkp3s, stl, kp3s, bmg_extruder, titan, e3dv6, extruder, kingroon_kp3s, BMG, E3D_Hotend,...
1
1.0
Feb 7, 2022
02/22
Feb 7, 2022
by
William Chen (wctt)
data
eye 1
favorite 0
comment 0
This will keep the cable for direct drive conversions to be out of the way of the prints and also the heated bed. It should be able to attached with the included screw to the old extruder mount.
Topics: thingiverse, cable_management, direct_drive, 3D Printer Extruders, stl, Ender_3
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Michael Wong (straights1x)
data
eye 1
favorite 0
comment 0
A lighter weight, easier to print, less intrusive BMG direct drive mount. This won't get in the way of your hot end ducts.
Topics: 3D Printer Parts, thingiverse, direct_drive, BMG, bondtech_bmg, bondtech, Bondtech_BMG_extruder,...
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Tate Sumerlin (Sumerlin_Designing)
data
eye 1
favorite 0
comment 0
This design is a major redesign of my original H2 carriage. I had remixed a design from @morganlowe, but assembly of it was too complex. So I searched around and found a one by @designsbydave. I downloaded it and added my own backplate I have designed, smoothing out the iffy details and adding some extra parts. The goal for this carriage was to use a 4010 blower for part cooling, a SuperPINDA probe for ABL, and a 4020/10 fan for silent hotend cooling. Thankfully, I have accomplished each of...
Topics: 5015_fan_duct, Anet_a8, superpinda_probe, inductive_probe, stl, BIQU_H2, SuperPINDA, BIQU,...
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Jacob Greenberg (Greenbomb)
data
eye 1
favorite 0
comment 0
My adaptation of the Hero Me Gen 5 for a Micro Swiss Direct Drive mount on an Ender 5. Optional mount on the side for a BLTouch. Parts are designed to use M3 X D5.0 X L4.0 heat set inserts instead of pocketed nuts. I used the same inserts as most Voron printer parts (available from the HotXYZ store on AliExpress).
Topics: 3D Printer Parts, thingiverse, micro_swiss, Creality_Ender_5, stl, Hero_Me_gen_5,...
1
1.0
Feb 5, 2022
02/22
Feb 5, 2022
by
Ivan Ivanov (Anksunamun)
data
eye 1
favorite 0
comment 0
The advantage of this dictum is: 1) More correct center of gravity by turning 45 degrees. 2) No direct contact with hot engine. 3) Simple and stable structure consisting of one part. 4) Does not eat the living space (like "Crab"). 5) PLA is allowed. Достоинством данного директа является: 1) Более правильный центр тяжести за счет поворота на 45 градусов. 2) Отсутствие прямого...
Topics: thingiverse, 3D Printers, direct_drive, direct_drive_extruder, Direct_extruder, stl, direct
1
1.0
Feb 5, 2022
02/22
Feb 5, 2022
by
Onur YAZICI (afterdarq)
data
eye 1
favorite 0
comment 0
Direct Drive (BMG & BMG clones compatible) setup for CR10-Smart
Topics: 3D Printer Parts, thingiverse, BMG_clone, direct_drive, BMG, cr10smart, direct_drive_extruder, stl
1
1.0
Feb 3, 2022
02/22
Feb 3, 2022
by
Michael Wong (straights1x)
data
eye 1
favorite 0
comment 0
Top mounted bearing spool holder for ender or 20x20. No supports needed. Designed for fast printing without supports, frictionless spooling, and no unwinding on its own like spool mounts that go through the center of the spool. Needs 4 x 608 bearings, the bearing covers screw onto the threads. It's a tight fit by design. You can print the base twice, or mirror it to have left and right sides. Spool action: https://imgur.com/8pGYxXv
Topics: Ender, 3D Printer Parts, bearing, thingiverse, direct_drive, spool_holder, 608_bearing,...
1
1.0
Feb 2, 2022
02/22
Feb 2, 2022
by
Matt Jones (ElectricDoggo)
data
eye 1
favorite 0
comment 0
Direct drive for red aluminum dual gear extruder. Fits Ender 3 and Ender 3 V2. I had been using the Direct Drivinator with Hero Me 5 before this but found that I was getting a lot of flex when the extruder pushed filament forward. This resulted in blobby prints. This design is totally rigid and produces no blobbies. Added thumb brace so when you press the lever on the extruder you don't have to put pressure on the rest of the print head. Added bracing so that it is much more rigid and you can...
Topics: 3D Printer Parts, thingiverse, direct_drive, direct-drive, herome, Herome_gen5, dualgear_extruder,...
