Topics: Youtube, video, Gaming, Fanatec, Fanatec: ClubSport Steering Wheel F1® Esports V2, обзор на...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Anthony Buys (Comendai)
data
eye 1
favorite 0
comment 0
Direct drive extruder filament guide that slides right into the rail of printer. for the screw in fittings it uses the PC4-M10 Pneumatic Fitting you can find on amazon at link https://www.amazon.com/s?k=PC4-M10+Pneumatic+Fitting&rh=n%3A16310091%2Cp_72%3A1248921011&dc&crid=3DP9DGQGA8HL1&qid=1643220440&rnid=1248919011&sprefix=pc4-m10+pneumatic+fitting%2Caps%2C93&ref=sr_nr_p_72_1 Or use Creality Capricorn Bowden at link...
Topics: 3D Printer Parts, thingiverse, filament_guide, direct_drive, Ender_3_Pro, stl, guide
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Sorin Borcea (SorBor)
data
eye 2
favorite 0
comment 0
After upgrading my Ender 3 printer with direct drive extruder, it became difficult to use the filament runout sensor, because the wiring interfered with the print. After searching for a solution, i came over a review of the new Ender 3 S1. This one is already upgraded just like my printer and there was the filament runout sensor mounted on top of the printer. I liked that idea and i designed an articulated bracket that allow mounting the runout filament sensor on top of the printer, aligned...
Topics: sensor_mount, thingiverse, Filament_Sensor, filament, sensor, direct_drive, 3D Printer Accessories,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Lee Kinghan (Phoenixcustom)
data
eye 1
favorite 0
comment 0
couldnt find a direct drive model that didnt use the original extruder or the microswiss hotend so i made one... not perfect yet ... a bit more to do.. its about 0.5mm off centre... used the lightweight part fan I'll find it and give credit for it uses microswiss all metal hotend generic dual gear extruder approx 28-29mm capricorn tube original part fan original stepper motor
Topics: thingiverse, direct_drive, cr6se, Creality_CR6-SE, 3D Printer Extruders, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Cooper Croteau (CoopaLoopa72)
data
eye 1
favorite 0
comment 0
Remixed the holder to work with a Creality CRTouch insted of a BLTouch. The connector is in a different place and was blocked by the original support. You can use the M3*6mm screws that come with the CRTouch and screw them directly into the mount from the bottom just like the factory mounts (holes are 2.6mm for a self tapping fit, you may need to adjust your hole size offset in your slicer or drill out the holes if you are having issues).
Topics: crtouch, 3D Printer Parts, thingiverse, crtouch_mount, direct_drive, BMG, crtouch_holder, stl,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Daniel Pipe (Husker83)
data
eye 0
favorite 0
comment 0
This is a bunch of remixes so that the Ender 3 can have everything I wanted at the same time: 1. A good fan duct that can hold 2x 5015 fans. I've tried others and they where too flimsy 2. A direct drive extruder using stock parts only 3. A drag chain for X as I had failed prints due to cables binding 4. A CR/BL touch mount (this mounts either) 5. An LED light 6. Threaded inserts - not self-tapping screws into plastic The downside of this is that you reduce the X-axis to 188mm, 20mm is due to...
Topics: crtouch, 3D Printer Parts, thingiverse, dragchain, BL_Touch, direct_drive, CableChain,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jake Beju (JakeTri)
data
eye 1
favorite 0
comment 0
I designed this to snap on the extruder arm and help guide the PTFE tube with filament into extruder to avoid bending the filament (see picture without the guide) Support needed for printing the PTFE tube guide.
Topics: thingiverse, dual_geared_extruder, dual_gear, direct_drive, dual_gear_extruder, 3D Printer...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Maximilian Klug (Boggy1986)
data
eye 1
favorite 0
comment 0
I bought the Creality filament runout sensor but didn'T want to use the supplied braket. So I designed an holder to clamp directly on top of my extruder motor. I used a knive to clean the holes in the holder and then I could screw the supplied screws from the sensor right into the holder.
Topics: thingiverse, Micro_Swiss, direct_drive, Filament_runout, 3D Printer Accessories, Runout_sensor,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Erika Schade (erkschade)
data
eye 1
favorite 0
comment 0
This is a modification for the " onodono" design -link below, but with more mounting holes a thicker base for the BL touch and moved the stiffener to the bottom to make space for the mounting holes.
Topics: 3D Printer Parts, thingiverse, stl, direct_drive_extruder, ender 3 v2, Ender_3
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jake Beju (JakeTri)
data
eye 2
favorite 0
comment 0
I used the wonderful idea (form https://www.thingiverse.com/thing:3743586) to attach the filament [runout sensor from AliExpress](https://www.aliexpress.com/item/4000253164602.html) on top of the [X limit switch bracket](https://github.com/Creality3DPrinting/Ender-3/blob/master/Ender-3%20Mechanical/STP/X%20limit%20switch%20bracket.step) You also need two M3x16 for the sensor and one [PC4-01 connector](https://www.aliexpress.com/item/32851993776.html) for the PTFE tube
Topics: Ender_3, thingiverse, direct_drive, Filament_runout, 3D Printer Accessories, Runout_sensor, runout,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jake Beju (JakeTri)
data
eye 1
favorite 0
comment 0
This is a remix of the Hero Me Gen5 flavor of Direct Drive mount for dual gear extruder from https://www.thingiverse.com/thing:4140659 with more room under the mount for 5020/5015 fans. The mount should be printable without support (brim recommended)
Topics: dual_geared_extruder, dual_gear_extruder, direct-drive, direct_extruder_mod, Ender_3_Pro, stl, 3D...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Angel Loza (LoZa)
data
eye 0
favorite 0
comment 0
To download all project click in this link https://www.thingiverse.com/thing:5254723/zip Ender 3 Ender 5 Direct Drive Orbiter extruder V6 ================================ Lista de materiales: -------------------------- • 1unidad – Orbiter Extruder 1.5 Right Fysetc https://s.click.aliexpress.com/e/_APAz8n Trianglelab https://s.click.aliexpress.com/e/_AWKhiF • 1 unidad - Hotend V6 https://s.click.aliexpress.com/e/_A75843 • 60-70 mm -- PTFE Capricorn...
Topics: Ender, Orbiter_V15, 3D Printer Extruders, creality_ender5_plus, Ender_direct, stl, Ender_Extender,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Pekka Piippo (spegelius)
data
eye 1
favorite 0
comment 0
I like the original Bondtech style extruder, compact and seems to work nicely. Also wanted to use it as direct drive on my CR-10 S5 so created a mount for it. Also added some sacrificial bridges to the M10 lid part and an experimental soluble support model (no tested). Tested briefly and seems to be working, but might be improving this and adding mounts for different hotend (Volcano) OpenSCAD sources: https://github.com/spegelius/3DModels/tree/master/PrinterParts/CR10_S5
Topics: 3D Printer Parts, thingiverse, direct_drive, bondtech, stl, CR10S5
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Aleksandr Aleksandrov (alexlpr)
data
eye 1
favorite 0
comment 0
Feel free to support me, so I can create and share even more awesome projects. Thank you! Hello Friend! Come to my website. There you can find links and reviews about quality hobby products. https://MyHobbyTools.com ✔ 3D PRINTING My Favorite 3D Printers 3D Printing Tools 3D Printer Parts ✔ ELECTRONICS Batteries and Chargers Soldering Kits & Modules Multimeters Connectors ✔ TOOLS Power Tools Hand Tools ✔ RC RC Drone Parts RC Tools RC Drone Setup YouTube:...
Topics: thingiverse, extruder, direct_drive_extruder, biqu h2 mount, 3D Printer Extruders,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mac Andy (macandyoutdoors)
data
eye 0
favorite 0
comment 0
Remixed from https://www.thingiverse.com/thing:4746141 , for use with ender 3 direct drive Kit: https://smile.amazon.com/dp/B0824ZQ3D1/ref=cm_sw_em_r_mt_dp_GN89NE54BC612JW12PST that has a different V-Slot Backplate A crude version 2.2 is coming, printing the prototype
Topics: Fan_Housing_V2, hotend_cooling, Ender_3, 5015_fan_duct, thingiverse, 5015_blower, 3D Printer Parts,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Angelo Storino (SinththeSphinx)
data
eye 0
favorite 0
comment 0
This is my first public model! I created this bumper because the Microswiss Direct Drive kit doesn’t have a tab to hit the X endstop on my Aquila X2, and when you home your printer, it will strain itself being unable to reach the end stop switch due to the belt housing. I saw some people solving this by taking off the belt housing on the left side, but I thought there should be a better way. No extra mounting hardware needed! Utilizes the original 2 self tapping nozzle shell housing screws...
Topics: Voxelab_Aquila_X2, microswiss_dd, x_endstop, bumper, stl, 3D Printer Parts, MicroSwitch_Bracket,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Baybars HAZAR (Biohazardious)
data
eye 1
favorite 0
comment 0
Hello everyone, I was planning to modify my Biqu B1 to use that great Voron Extruder. Thanks to Butcher9_9's Ender 3 design, it gave me a good start point. If you want to use my design for B1, get ready to modify your printer with the files and instructions I am currently sharing with you. :) First of all you need parts from Voron 2.4 obviously, This carriage designed to use with direct drive extruder. I am currently using and tested everything with e3d but I am sure that other hotends will fit...
Topics: 3D Printer Parts, thingiverse, hotend, carriage, afterburner, direct_drive, Biqu_B1, E3D_Hotend,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
chanakya prasad (chanakya00)
data
eye 1
favorite 0
comment 0
The original design is wonderful and fit perfectly. But found that their is 2.3 mm eccentric between dual gear extruder and hotend (both the stock and metal). Hence herez the remix with +2.3mm shift of extruder on Y-axis. Many thanks to brats_wiseguy for fusion files
Topics: 3D Printer Parts, Ender_3, thingiverse, direct_drive, dual_gear, dual_gear_extruder, CR-10,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Kirill Kuznetsov (dr_agon)
data
eye 0
favorite 0
comment 0
# Direct drive solution for Briss Moto fan duct using Orbiter v1.5 extruder I use [BrissMoto fang duct v4.4](https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang) on my two Voxelab Aquilas. I was unsatisfied with my [previous direct drive mount](https://www.thingiverse.com/thing:5214793), so I've decided to research what I can implement there and how to improve the extruder solution drastically. I came up with this idea. It uses an Orbiter v1.5 with a custom housing to...
Topics: thingiverse, Orbiter_V15, Briss_duct, direct_drive, Voxelab_aquila, 3D Printer Accessories,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Kyle Steiner (steinerk)
data
eye 1
favorite 0
comment 0
Removed some extra material that was preventing the clip from properly sitting on the stepper motor. Since the motor has differing dimensions for the black vs silver sections, the original did not fit quite right. I also removed a portion of what appeared to be a zip-tie mount from the bottom at one side. This was rubbing on one of the wheels.
Topics: Ender, 3D Printer Parts, thingiverse, dragchain, cable_management, drag_chain, microswiss_dd,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Reginald Spear (Bigwumpus)
data
eye 0
favorite 0
comment 0
Summary This is a filament lead in tube (Bowden) end holder for Ender 5 Plus direct extrusion modifications. It is designed to hold the end of the filament lead in tube from the filament break detector to the direct extruder. The filament bracket installs in the place where the original extruder was.
Topics: thingiverse, 3D Printer Accessories, stl, Filament_bracket, direct_drive_extruder
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Chris (Proper_Chopper)
data
eye 0
favorite 0
comment 0
Hier ein schraubbarer Filamentguide...perfekt um Filament aus einem Regal oder ähnlichem zum Extruder zu leiten.Egal ob Direct Drive oder Bowden Danke an Pini für den geilen Probedruck und die schönen Fotos :-) Sunlu PLA Carbon Fiber Easy to print Update:2.Version hinzugefügt die die Spannweite von ca 45mm auf 55mm erhöht (Bottom long)
Topics: thingiverse, filament, filament_guide, 3D Printer Accessories, easy_to_print, bowden_hotend,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Marcos Moura (marksmoura)
data
eye 1
favorite 0
comment 0
This is a remix of the Crtwin for ender 3 which is awesome. I edited it so the shround can be printed and mounted in one piece. Use the original Belt lock piece from BLV kit. Or you can try to print it. I haven't tried that myself. You can use Fusion360 to edit it if you need. For the Hextrudort extruder I suggest you check their github for mounting and printing instruction i haven't modified it in anyway. Extruder was printed in ABS. Crtwin shroud in PETG Hotend: Mosquito Mellow NF BL touch...
Topics: thingiverse, direct_drive, direct_drive_extruder, ender_3_v2, HextrudORT, Direct_extruder, 3D...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Wolfgang Grebe (docwoelle)
data
eye 0
favorite 0
comment 0
This is a Filament Guide with Runout Sensor for Ender 3 with Direct Drive. Additional parts: 1x 608 Bearing 1x M3x20 (if not available, instead you can use bearingSub_pin) Print: 2x Spacer 1x RunoutSensor 1x Ring (if no screw M3 available: print bearingSub_pin) Put the ring and the two spacers on a 608 bearing. Mount it to the arm with a M3x20 screw or the pin. Add a microswitch (19.7 x 10.6 mm) to the sensor mount.
Topics: 3D Printer Parts, thingiverse, filament_guide, direct_drive, filament_runout_sens, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Chad Brandenburg (BreeOge)
data
eye 0
favorite 0
comment 0
This is a project I am currently working on. After looking and looking I could not find a TRUE DIRECT DRIVE setup for a Geeetech with BMG and E3D V6, So I am making one. I should have this done in the next week, and once I do a few test prints to make sure its all good, I will post the files. I am currently posting the pictures to let people see what I have so far. Let me know if you would be interested in this, thank you. This will be a True Direct Drive, you will attach the E3D V6 to a BMG or...
Topics: Geeetech_A30M, BMG_clone, 5015, geeetech_a20, geeetech_A30, geeetech_A10M, bondtechbmg, stl, a30,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Chauncey (ACE9708)
data
eye 0
favorite 0
comment 0
Filament sensor relocating mount after doing a direct drive conversion.
Topics: 3D Printer Parts, thingiverse, Voxelab_Aquila_X2, direct_drive, Aquila_x2, Filament_Sensor, stl,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
William Chen (wctt)
data
eye 0
favorite 0
comment 0
This is a modified extruder arm/base with a cable holder integrated for direct drive conversions. This is mainly for the Speed Drive conversions: https://www.thingiverse.com/thing:3816051 I had my doubts as to how long this would last, but I printed it in 100% infill and it has held up with lots of printing for the last 2 months so far. :)
Topics: thingiverse, extruder, direct_drive, CR-10, 3D Printer Extruders, stl, Ender_3
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
A low profile adapter (5mm tall) for the BIQU H2 to lets you replace the 35mm heatsink fan with a 40mm one (4010 or 4020). This is only really needed if you want to run a quieter fan or need more cooling if running very high nozzle temperatures. Depending on your setup and which fan you go with, you may lose some x travel to the left. Be sure to make adjustments to maximum x travel and your probe offset in your printer's config. Firmware Notes -------------- • 4010 users should subtract 5...
Topics: BIQU H2, Ender_6_mod, thingiverse, TFT35, 3D Printer Parts, Ender-6, BTT, heatsink fan, 4010 fan,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
William Chen (wctt)
data
eye 0
favorite 0
comment 0
This is a modified version with a stronger part which clips to the metal plate and also an easier print on it's side with less supports needed.
Topics: thingiverse, direct_drive, CR-10, cr10v2, 3D Printer Extruders, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Marek Lorenc (Marecki_l)
data
eye 1
favorite 0
comment 0
Ender 3 pro conversion to direct drive extruder. BIQU dual gear extruder and only two cup head M3x35 screw required. You can find here also my Fan duct for 5015 fan. All fits to standard Ender carrier. Direct drive adapter could be used also with original fan case.
Topics: thingiverse, direct_drive, Ender_3_Pro, 3D Printer Extruders, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Nils De Laeter (nalmie)
data
eye 0
favorite 0
comment 0
extruder mount for standard ender extruder to be used with briss fang and noctua 40x20mm fans share your thoughts, give me shout if you like it, and enjoy the print and upgrade.
Topics: Briss, thingiverse, creality, extruder, fang, noctua, silent, Noctua_Fan_40mm, upgrade,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Ulrich Lachmuth (UliLac)
data
eye 1
favorite 0
comment 0
When I tried the original model "for size" I found two issues - one, the filament path was off a few mm, two, my BMG all metal clone wouldn't fit because the filament guidance channel had no place to go (that black round thingy provided to screw a PTFE retainer in). I couldn't leave it off 'cause without it the PTFE would not have any guidance at all on the upper end, which is bad. So here's my remix of asd913's remix adressing the issues. Changes to the original model: - made room...
Topics: 3D Printer Parts, BMG all metal, thingiverse, direct_drive_extruder, drivinator,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Maker Norgren (Malakian89)
data
eye 1
favorite 0
comment 0
!!WARNING: WORK IN PROGRESS, NOT YET TESTED. PRINT AT OWN RISK!! Custom toolhead with integrated partcooling fan like the voron afterburner. Uses stock hotend with a BMG in Direct drive config. Hotend fan(4010 or 4020) is attached to hotend, "BMG Adapter" is mounted directly to strain gauge, so nothing should interfere with the strain gauge and leveling. Everything should print without support if you have decent cooling, except the "BMG Adapter". Needs support on the E3D v6...
Topics: thingiverse, 4020_fan, 5015_blower, creality_CR6, 5015, CR6, CR6-SE, cr6se, BMG, direct_drive,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Angel Loza (LoZa)
data
eye 0
favorite 0
comment 0
It is a remix of the orbiter extruder for the kingroon KP3s, **https://www.thingiverse.com/thing:5236533** In this case the housings have been adapted for **block type H** -------------------------------------------------------------------------------------------- Este es un remix del extrusor orbiter para la kingroon KP3S, **https://www.thingiverse.com/thing:5236533** En este caso se han adaptado las carcasas y tope final de carrera para **patín tipo H**
Topics: Orbiter_V15, kingroonkp3s, upgrade_Kingroon_KP3, stl, E3D, Extrusor_directo, direct, e3dv6,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Bernat Sempere (bsemp86)
data
eye 1
favorite 0
comment 0
My BMG had the lever on the other side and the original part didn't fit. I printed it using PETG and is working briliantly. It is mounted using a pancake motor to lower overall weight.
Topics: 3D Printer Parts, thingiverse, BMG_clone, direct_drive, BMG, direct_drive_extruder, ender_3_v2, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Glen Harris (astfgl)
data
eye 0
favorite 0
comment 0
The parent part was not manifold and had some gaps and separation when sliced. I imported the STL into a CAD program and filled the gaps. The H2 silicon sock was interfering with part of the bracket, so I trimmed that down as well.
Topics: thingiverse, stl, mount, 3D Printer Extruders, direct_drive_extruder
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Michael Wong (straights1x)
data
eye 1
favorite 0
comment 0
Top mounted bearing spool holder for ender or 20x20. No supports needed. Designed for fast printing without supports, frictionless spooling, and no unwinding on its own like spool mounts that go through the center of the spool. Needs 4 x 608 bearings, the bearing covers screw onto the threads. It's a tight fit by design. You can print the base twice, or mirror it to have left and right sides. Spool action: https://imgur.com/8pGYxXv
Topics: Ender, 3D Printer Parts, bearing, thingiverse, direct_drive, spool_holder, 608_bearing,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Ivan Ivanov (Anksunamun)
data
eye 1
favorite 0
comment 0
The advantage of this dictum is: 1) More correct center of gravity by turning 45 degrees. 2) No direct contact with hot engine. 3) Simple and stable structure consisting of one part. 4) Does not eat the living space (like "Crab"). 5) PLA is allowed. Достоинством данного директа является: 1) Более правильный центр тяжести за счет поворота на 45 градусов. 2) Отсутствие прямого...
Topics: thingiverse, 3D Printers, direct_drive, direct_drive_extruder, Direct_extruder, stl, direct
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Angel Loza (LoZa)
data
eye 1
favorite 0
comment 0
To download all project click in this link https://www.thingiverse.com/thing:5127150/zip Kingroon KP3S Direct Extruder Orbiter+V6 ================================ En los archivos adjuntos encontrareis las instrucciones de montaje, así como el Marlin 2.0.9.2. El Firmware esta compilado para el chip SMT32F1, si tu kingroon es el último modelo necesitas compilarlo para la versión SMT32F4 (mks_robin_nano_v1_3_f4) Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for...
Topics: kingroonkp3s, stl, kp3s, bmg_extruder, titan, e3dv6, extruder, kingroon_kp3s, BMG, E3D_Hotend,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Micro Swiss Support (MicroSwiss)
data
eye 0
favorite 0
comment 0
Fan shroud and probe mount for printers: Creality CR-10S Pro V2 Creality CR-10 Max Extruder Kit: Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (SKU: M2601) *Print Settings* Material: PETG Supports: Build Plate Only Infill: 20% *Specific parts the fan shroud was designed for* Extruder: Micro Swiss CR-10 Direct Drive Hotend: Micro Swiss CR-10 All Metal Hotend (4 finned cooling block) Part Cooling Fan: 4020 Blower Hotend Fan: 4010 Probe: BL Touch
Topics: shroud, 4010_fan, stl, 40mm_fan, fan_shroud, 3D Printer Parts, micro_swiss_hotend, Creality,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Maurizio Gambo (MauriMulon)
data
eye 0
favorite 0
comment 0
I was wondering to put a dual drive gear extruder on my Prusa Mini, there are already several models but no one with integrated filament sensor. I retrived few pictures from bondtech about the IF sensor arrangment then I build my version. Onother target was to make an easy replacment without buying additional parts as teflon pipe, threaded joint, and so on. I used only a threaded insert for the holder retainer but I make available also the version for the nut. I bought a 20€ dual gear...
Topics: 3D Printer Parts, thingiverse, filament, extruder, sensor, direct_drive, drive, bondtech, dual,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Cad AxeDesign (CadAxe)
data
eye 0
favorite 0
comment 0
Print as you like, I recomend PETG or PLA+ no support required
Topics: 3D Printer Parts, thingiverse, extruder, SUNLU-S8, direct_drive, sunlu, direct_drive_extruder,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Cad AxeDesign (CadAxe)
data
eye 0
favorite 0
comment 0
Print as you like, I recomend PETG or PLA+ no support required
Topics: 3D Printer Parts, thingiverse, extruder, SUNLU-S8, direct_drive, sunlu, direct_drive_extruder,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
James Konidis (jameskreate)
data
eye 0
favorite 0
comment 0
Made an adapter to attach to hot end enclosure to guide the filament directly from the extruder to the hot end. 2/17/22 Made a change! First model was a little off.
Topics: 3D Printer Parts, thingiverse, direct_drive, Aquila, adapter, stl, VOXELAB
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
Simple hole covers if you've removed the spool holder and extruder from your Ender 6. I use them since I have my filament runout sensor relocated inside my case and I use a reverse Bowden tube out the sensor's wire hole to a drybox. If you want, you can buy me a coffee at https://ko-fi.com/vampyrex13
Topics: dry box, thingiverse, Ender_3, Ender-6, Ender6, reverse Bowden, 3D Printer Accessories, Creality...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
William Chen (wctt)
data
eye 1
favorite 0
comment 0
This will keep the cable for direct drive conversions to be out of the way of the prints and also the heated bed. It should be able to attached with the included screw to the old extruder mount.
Topics: thingiverse, cable_management, direct_drive, 3D Printer Extruders, stl, Ender_3
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Dave Arsenault (Ghrayfahx)
data
eye 0
favorite 0
comment 0
I have been using the wonderful mount by Chris_Neale at https://www.thingiverse.com/thing:4683117 but wanted to switch to a Voron style blower and found the mount wasn't tall enough to clear the housing. I also cut a hole in the side because I have my motor mounted sideways and the original didn't have a spot for the cable to pass through in that orientation. Edit: I had to move some bits around but this should fit much better now. It also allows you to slip it onto the motor since I cut the...
Topics: 3D Printer Parts, smartfilamentsensor, thingiverse, Smart Filament Sensor, BTT, direct_drive,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Onur YAZICI (afterdarq)
data
eye 1
favorite 0
comment 0
Direct Drive (BMG & BMG clones compatible) setup for CR10-Smart
Topics: 3D Printer Parts, thingiverse, BMG_clone, direct_drive, BMG, cr10smart, direct_drive_extruder, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Petr Tvarog (Chodec)
data
eye 0
favorite 0
comment 0
Compact direct drive for Ender 5 and derivates. It is designed for E3D V6 with the BMG extruder and pancake step motor. BLTouch holder is also included. Duct is ready for radial blower 5015. Due to belt hold system at the Ender 5 only fan 4010 is possible to use. Klipper users also can use plate for ADXL345 accelerometer. Note: This design is prepared for Trianglelab components, ie. BMG v2 clone, E3D V6 clone, Extruder motor. Other types may need to be modified. BLTouch offset: X-28.5 mm Y-28.5...
Topics: 3D Printer Parts, thingiverse, Ender5, DDE, compact, stl, bmg clone, direct drive
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Yasen Nichev (yasenyasen)
data
eye 0
favorite 0
comment 0
I have upgraded my Longer LK4 Pro with Micro Swiss Direct Drive Extruder. The filament guide provided by Micro Swiss was for Ender 3 and there was no way to attach my Longer filament runout sensor. I tried searching for such part on Thingiverse, but I couldn't find anything, so I made one. This filament guide uses M6 connector with some PTFE tube to guide the filament to the sensor and it uses the stock micro swiss connector on the other end. It just goes straight to the extruder without...
Topics: 3D Printer Parts, thingiverse, micro_swiss, filament_guide, direct_drive, Longer_LK4_Pro,...
