1
1.0
Apr 19, 2022
04/22
by
Thomas parker (makesomemore)
data
eye 1
favorite 0
comment 0
Here's a quad I made a while back with OptimaZe (rotorbuilds) its a 60mm (motor to motor) brushed ripper! built here https://rotorbuilds.com/build/28892 Thanks OptimaZe! sorry I didn't post sooner... Specs: size: 60MM weight:1.85g prop size: 31mm FC mounting: m2 and 1.4mm (tinywhoop screws) anyways enjoy the frame more coming soon!!!!! farewell! and stay safe! -makesomemore :)
Topics: fpv, brushed 60mm frame, thingiverse, fpv drone frame, drone frame, drone, tinywhoop, 60mm drone...
3
3.0
Oct 15, 2021
10/21
by
Thomas parker (makesomemore)
data
eye 3
favorite 0
comment 0
Heres is a drone frame I've been working on, its a 80mm wheelbase perfect for tiny whoop toothpick conversions, uses the 6.6mm 3 hole and 9.0/8.5mm hole patterns, designed for 40mm props, the new hqprop bi blades will work well, THIS IS A TEST, VERSIONS MIGHT CHANGE, thanks again helping test my designs :) Specs! *40mm props *80mm wheelbase *6.6mm 3 hole and 9.0/8.5mm hole patterns *25.5 FC mounting if you would like to support me please do so here! https://ko-fi.com/flexframes Thanks :)
Topics: thingiverse, R/C Vehicles, tinywhoop, stl, drone, 80mm toothpick, 80mm drone frame, drone frame,...
10
10.0
Apr 17, 2021
04/21
by
RC Pilot Multirotor (FPV_Pilot)
data
eye 10
favorite 0
comment 0
drone frame
Topics: R/C Vehicles, thingiverse, drone_frame, stl
4
4.0
Aug 9, 2021
08/21
by
Thomas parker (makesomemore)
data
eye 4
favorite 0
comment 0
Here is a frame I made for a friend on rotor-builds :here:(https://rotorbuilds.com/build/27564) {design parameters} motors: 8520 x 720 x 716 fc: 25.5x 25.5 props: any 65mm props support me on Kofi! https://ko-fi.com/flexframes it's also available for purchase here(https://ko-fi.com/s/4a1a54d3cc) peace out fam! :)
Topics: brushed 100mm frsme, brushed toothpick, drone frame, thingiverse, R/C Vehicles, brushed drone,...
5
5.0
Apr 27, 2021
04/21
by
Laszlo Jasko (jlaszlo)
data
eye 5
favorite 0
comment 0
The first ever drone frame designed to fit DJI HD FPV as a printed model. This model is in beta state. It works. It can be printed and assembled (tried). It accepts DJI, but still work needed on top plate as antennas has no cutouts (you can do it with heated iron at the moment). Comes with 20x20 ESC holes as originally was designed for FETTEC 4in1 ESC. In the arm slots you can mount the stock XF antenna running to the front plate. Please comment if you build it and fly it, all ideas will be...
Topics: thingiverse, drone, drone_frame, stl, R/C Vehicles
7
7.0
Apr 18, 2021
04/21
by
Stephen (Evostevo777)
data
eye 7
favorite 0
comment 0
This is a accurate scale model of the USA Air-Force Predator Drone that I made using data points and it will fly if powered. don't forget to like and tip please! thanks.
Topics: Scans & Replicas, scale_model, thingiverse, stl, drone_frame
10
10.0
Jun 20, 2021
06/21
by
zoltan bzman (rgbskills)
data
eye 10
favorite 0
comment 0
This is a fun little project that I have created so I don't loose it every time a brake something on a carbon frame :)). This "Wicked-1X" mini quad frame is created so I (or you) can have more flexibility in design and parts availability in my builds. I have mainly concentrated on ease of access to components and replacement of parts. # Parts List ### Arms The arms can easily be replaced by removing only one screw, this screw also connects the standoffs to the frame. ### Bottom plate...
Topics: thingiverse, Quadcopter_Frame, quadcopter, stl, drone_frame, drone, Hobby
6
6.0
Apr 20, 2021
04/21
by
Tom Harmon (tomdrone)
data
eye 6
favorite 0
comment 0
This is the BOTTOM PLATE to the two part 80mm Whoop ducted drone frame. Cut on a CNC machine from 1mm carbon fiber. Could also be 3D printed. .DXF file is now added for CNC machine.
Topics: thingiverse, drones, drone, stl, R/C Vehicles, drone frame
6
6.0
Apr 20, 2021
04/21
by
Scott Walker (Skye_fpv)
data
eye 6
favorite 0
comment 0
3D printed parts for the Skye truss Frame
Topics: runcam_micro_swift, thingiverse, drone_frame, drone, stl, R/C Vehicles, fpv, racing_drone_frame,...
8
8.0
Jan 16, 2021
01/21
by
Tomohiro Shiraki (Yuyuemon)
data
eye 8
favorite 0
comment 0
It is the 800 class hexacopter I designed. The idea is obtained from DJI S900. Please print from A1 to C3, the main frame two parts each! ! ! ! Parts used M3 shaft 25 mm × 6 M3 screw 10 mm × 30 ~ Spacer 25 mm 4 to 6 (to support the frame) 16 mm carbon tube 250 mm × 6 (it may be over this) Used parts (planned) 40 A ESC × 6 380 KV 5008 class brushless motor × 6 Distribution Board Flight controller Receiver / transmitter 22.2V Lipo Wiring wire Cable band Other ... The landing gear is not on...
Topics: drone_frame, thingiverse, hexacopter, drone, R/C Vehicles, stl
6
6.0
Mar 17, 2021
03/21
by
Tom Harmon (tomdrone)
data
eye 6
favorite 0
comment 0
This is the top portion of the two part 80mm ducted drone frame for use with a 20x20 flight controller stack, HD cam, 1.5 inch props, and 11xx motors. Printed with Taulman PCTPE.
Topics: drone, drone frame, drones, stl, thingiverse, R/C Vehicles
7
7.0
Mar 17, 2021
03/21
by
Bludz FPV (BludzFPV)
data
eye 7
favorite 0
comment 0
Here is the CYCLIC. The range of ductless whoop frames available in True X, Stretch X, Squashed X and Stretch +. That's right.... the first plus configuration whoop frame. Lose the ducts and gain more performance from your whoop components. More details on the Halo RC website The frames should be printed from any rigid material. I use PLA+ 100% infil and the frame is hard to break. In nylon or carbon filament it will be even stronger. The motor mounts should be printed in TPU.
Topics: thingiverse, fpv, stl, tiny_whoop, drone_frame, R/C Vehicles
4
4.0
May 1, 2021
05/21
by
Rubén García (rubegartor)
data
eye 4
favorite 0
comment 0
ZJWRC 140mm antena mount, impreso en TPU. Elementos utilizados: - Pigtail SMA: https://www.banggood.com/Turbowing-MMCX-to-SMA-or-RP-SMA-Female-Flange-FPV-Antenna-Extension-Cord-p-1185767.html?cur_warehouse=CN&ID=511528 - Tornillería: 2x M2*8 & 2x tuercas M2 - 2 bridas pequeñas
Topics: stl, 3inch_drone, drone_frame, thingiverse, R/C Vehicles, ZJWRC
6
6.0
Mar 17, 2021
03/21
by
(IVIUPPET)
data
eye 6
favorite 0
comment 0
Needed to mount my Crazyflie 2 to a multirotor frame for a research project a while ago. I couldn't find a good way to do it, but thankfully I have a 3D printer so I can just fab a custom mount with precisely positioned, minute details. The 30.5x30.5 center to center hole pattern seems to be some kind of de-facto standard on some quadcopter frames I have come across. use the included hardware with the BQ deck (I think m2.5) and some m3 hardware to secure to your frame of choice. v[nottagged]:...
Topics: bitcraze, drone frame mount, stl, thingiverse, crazyflie, R/C Vehicles
4
4.0
Mar 31, 2021
03/21
by
max yurakh (max3dfpv)
data
eye 4
favorite 0
comment 0
my third mini drone frame
Topics: drone_racing, thingiverse, R/C Vehicles, drone_frame, frame, 100mm_drone, Quadcopter_Frame, stl,...
17
17
Apr 18, 2021
04/21
by
Nikodem Bartnik (NikodemBartnik)
data
eye 17
favorite 0
comment 0
https://www.youtube.com/watch?v=PDB7qasURs4 https://www.youtube.com/watch?v=xQPY4mWkHNU This is a frame that I made about year ago, I don't recomend printing it, because it is not super strong. Maybe it would help someone to design his own frame and create something new. This one works, but during development of my Arduino dron - Ludwik Drone I broke it about 7 times and I switched to different frame. I decided to share those files online because someone may find it useful. Here is a link to...
Topics: Drones, ludwik, Quadcopter, Diydrones, Quadcopter_F450, thingiverse, stl, dji_f450, f450, R/C...
6
6.0
Mar 2, 2021
03/21
by
David Blazeka (DavidBlazeka)
data
eye 6
favorite 0
comment 0
Drone shell, frame
Topics: thingiverse, stl, Diydrones, drone, drone frame, Hobby, drone shell, drones
4
4.0
Apr 1, 2021
04/21
by
Josh Palmer (JoshingAround)
data
eye 4
favorite 0
comment 0
170mm drone frame that would work with 3" props and 11xx or 12xx motors. anything with a 9mm mounting size. i printed it with priline carbon fiber pc and it worked pretty well until i dropped it from about 100 feet. it broke but handled it pretty well. nothing else was damaged
Topics: thingiverse, R/C Vehicles, drone_frame, 3_inch_propellers, stl, drone
3
3.0
Mar 19, 2021
03/21
by
Ruben Elias Solorzano Silva (publicidadinfinity)
data
eye 3
favorite 0
comment 0
Topics: R/C Vehicles, stl, thingiverse, Quadcopter_Frame, fpv_racing, drone_frame
7
7.0
Jan 15, 2021
01/21
by
(cooasty)
data
eye 7
favorite 0
comment 0
Air frame designed for a DJI FC 40 & Phantom 1. body approximately 25.0 oz ready to fly with out battery or gimbal. stock body wt 22.7 oz Will accommodate 5200 mAh batteries. Requires soldering longer wires from motor to ESC. Print Speed 1 ea: body 100% leg 80% escBkt 70% armClip 70% legBkt 60% Used 6/32" or 3mm stainless screws @ arm to body connection. Used 0.3 mm layers for small parts & 0.4 mm layers for large parts. body: v notch forward. arm spacers for thicker batteries....
Topics: drone, R/C Vehicles, thingiverse, drone_frame, dji_phantom, stl, dji
6
6.0
Mar 17, 2021
03/21
by
Tom Harmon (tomdrone)
data
eye 6
favorite 0
comment 0
HD cam and battery mount for 20x20 whoop stack.
Topics: R/C Vehicles, drone, drone frame, drones, stl, thingiverse, caddx, runcam
3
3.0
Jan 5, 2021
01/21
by
André Nicolau Aquime Gonçalves (anicolau)
data
eye 3
favorite 0
comment 0
Tyro 69 frame
Topics: tyro69, stl, Hobby, drone_frame, drone_racing, eachine_tyro69, thingiverse, drone
3
3.0
Jun 11, 2021
06/21
by
Lewis C (fracturedcarbon)
data
eye 3
favorite 0
comment 0
A simple 4-way brace to stiffen up the frame for better flight handling
Topics: arm, stl, thingiverse, drone_frame, Hobby, CineWhoop, drone, Quadcopter_Frame, brace
6
6.0
Mar 17, 2021
03/21
by
Tom Harmon (tomdrone)
data
eye 6
favorite 0
comment 0
This is a 80mm ducted drone frame for use with a 20x20 flight controller stack and HD cam. 1.5 inch props. 11xx motors. Ducts are very tight with the props so some sanding may be required.
Topics: drone, drone frame, tinywhoop, whoop, drones, stl, thingiverse, R/C Vehicles
6
6.0
Jan 21, 2021
01/21
by
Eduardas Golnikas (Edzius)
data
eye 6
favorite 0
comment 0
As u already know - using original frame QX70 drone is unflyable. I have tried other designs from Thingiverse, but they did not fit mostly because of different printers do slightly different sizes and the motors does not hold in place. So first print O rings in different sizes to se which size is best to hold your motors, adjust size for frame inner rings, and print the frame. .f3d file is attached, so it is good for u if u are using Fusion360. Using these props (uncut):...
Topics: eachine_qx70, drone frame, thingiverse, tiny_whoop, micro fpv, DIY, stl
10
10.0
Jan 10, 2021
01/21
by
Marc Ruhl (MarcRuhl)
data
eye 10
favorite 0
comment 0
This is a nice, light and sturdy quadcopter frame in the figure X. It fits up to 4.5'' Propellers and weighs 80g (my print). It fits 1806 Motors and is 4mm thick. This does not have the hole in the middle, like the normal X-CAT v2. Props: up to 4.5 inch Weight: 80g Motor Mount: 1806 Printing Dimensions: 148x148x4mm
Topics: x_frame, drone, drone-frame, drone_frame, thingiverse, R/C Vehicles, quadcopter-frame, stl,...
10
10.0
Apr 21, 2021
04/21
by
Jose Damico (damico)
data
eye 10
favorite 0
comment 0
A landing gear for drone frames like DJI Flamewheel F450 or F550 - https://github.com/Scicrop/flameweel-parts
Topics: thingiverse, drone_frame, dji_f450, stl, dji_f550, DIY, Landing_Gear
3
3.0
Jan 4, 2021
01/21
by
Christian Markussen (ChristianM67)
data
eye 3
favorite 0
comment 0
This is a 3d printed toothpick designed for 65mm props. I print the frame in CF nylon and I have crashed it many, many times without breaking the frame. I am sure that you can print with other materials such as PETG but I have not tried it. All parts can be printed without supports. There are three versions of the frame and they all have a mounting for a 10mm buzzer and RX: - Stretched X frame with 16x16mm flight stack - Dead cat frame with 16x16mm flight stack - Dead cat frame with 20x20mm...
Topics: R/C Vehicles, stl, drone_canopy, FPV_drone, drone_frame, thingiverse
6
6.0
Jun 11, 2021
06/21
by
(Skye_fpv)
data
eye 6
favorite 0
comment 0
Summary EDIT: Use the V3 version. This version tends to beak camera cases due to the hard connection point of the camera.. I like the way this version looks better but use the V3 for the added camera protection and soft mount capabilities. 5" Racing Drone Stretch X Frame. blah blah blah written stuff that no one reads... There is now a hybrid 5" arm. This arm is to be used as the rear arms. Each motor has a 20mm wider stance using this hybrid arm. So the rear motors will be 40mm...
Topics: drone_racing, thingiverse, drone_frame, racing_quadcopter, fpv_racer, racing_drone, stl
6
6.0
Jan 20, 2021
01/21
by
Gabe Cabasquini (Gabemiester08)
data
eye 6
favorite 0
comment 0
A stable frame for a small custom quad-copter. Fits a quad-copter that has a 110 mm diameter from center to center on the four motor fittings.
Topics: drone_frame, thingiverse, Quadcopter, Quadcopter_Frame, drone, R/C Vehicles, stl, Drones
5
5.0
Mar 18, 2021
03/21
by
pierre-Louis Esclattier (Peloow)
data
eye 5
favorite 0
comment 0
Gopro mount pour BLS Forza, adapté aux format gopro 6-7
Topics: R/C Vehicles, stl, drone, thingiverse, forza, drone_gopro_mount, drone_frame
2
2.0
Apr 20, 2022
04/22
by
Rotorama (rotorama)
data
eye 2
favorite 0
comment 0
3D Accessories for Rotorama Buddy frames https://www.rotorama.com/ramy/rotorama-buddy-5 https://www.rotorama.com/ramy/rotorama-buddy-7
Topics: thingiverse, drone_racing, drone, buddy, drone_frame, rotorama, R/C Vehicles, stl
5
5.0
Jan 16, 2021
01/21
by
Jakub Jurzak (Kidier)
data
eye 5
favorite 0
comment 0
This is waterproof 3D printed drone frame, which can lift DJI FPV air unit and man more
Topics: waterproof_drone, drone_frame, Mechanical Toys, 4inch, thingiverse, tiny_whoop, drone, stl
11
11
Jan 10, 2021
01/21
by
Marc Ruhl (MarcRuhl)
data
eye 11
favorite 0
comment 0
With just 48g this is the Superlight version of the X-CAT v2 frame. It comes with a hole in the middle and saves weight everywhere! The Frame is 4mm. If you are going to crash hard, please consider taking a more sturdy version, like the X-CAT v2. There will be a 3mm and 5mm version soon... Props: up to 4.5 inch Weight: 48g Motor Mount: 1806 Printing Dimensions: 148x148x4mm Thickness: 4mm Also check out the other versions of this frame!
Topics: x_frame, drone, drone-frame, drone_frame, thingiverse, fpv racing, quadcopter-frame, stl, R/C...
6
6.0
Mar 17, 2021
03/21
by
Tom Harmon (tomdrone)
data
eye 6
favorite 0
comment 0
This is a replacement frame for the BetaFPV 75x that includes true ducts. Ducts are very tight with props so some sanding may be required. I printed in Taulman PCTPE, as it's more flexible than ABS or PLA.
Topics: BetaFPV_75x, drone, drone frame, betafpv, drones, stl, beta75x, thingiverse, R/C Vehicles
3
3.0
Jan 7, 2021
01/21
by
Vince Cha (VincentCha)
data
eye 3
favorite 0
comment 0
Quadcopter frame replacement for Eachine Bat QX105. The original frame is really poorly designed and breaks all the time at the same place. This version was meant to be printed easy to print in standard PLA and be more robust than the original frame while keeping more or less the same weight. (2g heavier, less when you start to break motor protections) Crash-tested many times, still holding up.
Topics: R/C Vehicles, stl, qx105, Quadcopter, drone_frame, Quadcopter_Frame, Eachine, thingiverse, drone
3
3.0
Apr 5, 2021
04/21
by
Mat Foyle (CrunkleFloop)
data
eye 3
favorite 0
comment 0
A simple remix of the awesome ARS-5 V2.0) By https://www.thingiverse.com/Dave_C_FPV Shortened the length of the frame so all arms are equal length and shortened top-plate to fix. Haven't built and flown yet as waiting for parts to arrive.
Topics: thingiverse, R/C Vehicles, fpv frame, Drones, Quadcopter, stl, FPV_freestyle, drone frame
4
4.0
Jan 19, 2022
01/22
by
Stephen Beckett (mayaway)
data
eye 4
favorite 0
comment 0
Slippers for your DJI Mini 2 -- Leg Extensions or Landing Gear to keep up out of the dust or wet grass Print 2 of each part. Slip on cut straws from McDonalds 7.3mm ID Front straws should be 5mm shorter than the rear straws. My rear straws are 103mm long. Front 98mm long. My assembled feet weigh just 2 grams total! Have fun!
Topics: drone_frame, thingiverse, FPV_drone, DJI Mini 2, DIY, stl, Landing Gear, Drone
4
4.0
May 1, 2021
05/21
by
Zai West (bonzailyte)
data
eye 4
favorite 0
comment 0
I got a bunch of motors and props from the failed lily drone i always wanted to try but the 6" props are kind of not the norm, all my 5" frames were too small and i didnt like the flamewheel. this is more of a test to see how good this drone can handle etc, will update more soon. :) i think they are 2208 1450kv motors if anyone has information on the motors please let me know! some people say they are T-Motor brand but i doubt it. but any info would be great. and yea heres a quad...
Topics: stl, thingiverse, drone, Quadcopter, drone frame, quadcopter frame, Drones, quadrotor, R/C Vehicles
9
9.0
Apr 28, 2021
04/21
by
Simon Grundahl (simo995g)
data
eye 9
favorite 0
comment 0
This is my first attempt to design a drone there's meant to be used with an Arduino-board. 7mm DC motors fit into the motor sockets ... You are free to modify the design you self.
Topics: open_source, miniquad_frame, thingiverse, Drones, drone_frame, stl, Other, free, Quadcopter_Frame
3
3.0
Jun 11, 2021
06/21
by
Тимофей Шамало (Shilskii)
data
eye 3
favorite 0
comment 0
Easy 3D printable modular mobula 7 frame. Heavier, then original one, but still flyable. Also I make it little bigger for more stability. You will need just a 4 M2 screws to assemble. Stands for FC I made at the cnc mashine, but you can use what you want.
Topics: mini drone, fpv, tinywhoop, thingiverse, drone, mobula7, drone frame, R/C Vehicles, frame, stl
8
8.0
Jan 15, 2021
01/21
by
Pieter de Jager (biggerfishtofry)
data
eye 8
favorite 0
comment 0
This is a droneframe I designed a while back. It was a fun little project and I learned a lot. Hope it inspires you to also make something cool! Measurements will follow..
Topics: drone, R/C Vehicles, thingiverse, solidworks, cool drone, stl, drone frame, diydrones, dronediy,...
4
4.0
Mar 8, 2021
03/21
by
Eric Beirnes (madizmo)
data
eye 4
favorite 0
comment 0
Replacement frame for the DYS elf. The middle spacer piece has not been tested, i chopped up my stock one and am still using it.
Topics: drone frame, drone, dys, dys elf, R/C Vehicles, stl, thingiverse, elf, drone_racing
0
0.0
Aug 12, 2022
08/22
by
Sergey Kochurov (rlmf)
data
eye 0
favorite 0
comment 0
The smallest drone for a 25x25mm flight controller!! Take a break from the 65mm, try to fly it now!
Topics: micro_drone, micro_quadcopter, Quadcopter_Frame, stl, thingiverse, fpv, drone_frame, R/C Vehicles
6
6.0
Mar 2, 2021
03/21
by
Camron Stevenson (Bluto78)
data
eye 6
favorite 0
comment 0
TBS Source One frame. Since the files were open source I figured why not. Print 2 camera mounts and 4 arms. Pick between M3 holes or press nut holes on the arm plate. https://youtu.be/8qjpnIgd-O4 https://youtu.be/oWpCZgJzntc 9/30/2018 - I added a 6mm thick arm. That seemed to help mine a lot.
Topics: TBS_Source_One, FPV, Drone_Frame, thingiverse, stl, quad, kwad, R/C Vehicles, quadcopter
4
4.0
Apr 2, 2021
04/21
by
Jakub Jurzak (Kidier)
data
eye 4
favorite 0
comment 0
One Print drone whoop waterproof frame. Only silicone additionally needed for some seals.
Topics: waterproof, thingiverse, R/C Vehicles, drone_frame, 95x, whoop, stl, TinySerpent, drone, tiny_whoop
4
4.0
Mar 25, 2021
03/21
by
Snapmaker (SnapmakerInc)
data
eye 4
favorite 0
comment 0
SETTINGS: Printed by #Snapmaker 2.0 A350 Thickness: 2.5mm Work Speed: 300mm/min Plunge Speed: 800mm/min Step Down: 0.5mm Time: about 1h
Topics: stl, carbon fiber sheet, thingiverse, Snapmaker, CNC, Diydrones, carbon fiber, drone frame,...
3
3.0
Jan 6, 2021
01/21
by
Dimide DE (Dimide)
data
eye 3
favorite 0
comment 0
Remixed Dave_C original microblivion frame so we can mount XM+ to it and easily access usb to GEPRC 12A AIO. Did multiple tries before doing this one though. Added as well a level spacer because i don't have screw big enoug to reach top of the drone from frame
Topics: R/C Vehicles, 3d_printed_drone, stl, microblivion, drone_frame, diy, thingiverse, xm+, drone
1
1.0
Apr 19, 2022
04/22
by
Jack DDD (jackld2)
data
eye 1
favorite 0
comment 0
A light weight Eachine e010 frame that is quite durable. Requires small screws to mount the board, or a rubber band or ziptie can be used.
Topics: thingiverse, E010, Quadcopter, Drone, Frame, Quadcopter_Frame, Drone_Frame, R/C Vehicles, E10, stl,...
11
11
Jan 6, 2021
01/21
by
Keith Talbot (keitht)
data
eye 11
favorite 0
comment 0
This is my take on the Inductrix frame support. The curves provide rigidity for side by side motors. With PLA, this should weigh approximately 1.6g. There are 2 version: FrameSupportV03_64: ~64mm diagonal wingspan FrameSupportV03_65: ~65mm diagonal wingspan Update Jan/05/2017: Added FrameSupportV04_65 Improved support on the inside of the motor hole and removed some material from the outside to reduce weight
Topics: R/C Vehicles, stl, Inductrix, Blade_Inductrix, drone_frame, fpv_inductrix, tiny_whoop, thingiverse,...
