1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This is a Cable Holder for the Ender 5 Plus with linear rails and the Micro Swiss Direct Drive I use this cable chains 20x10mm: https://www.aliexpress.com/item/32999589537.html?spm=a2g0s.9042311.0.0.27424c4dZDh4ri I use the cable chain trays from theaftab: https://www.thingiverse.com/thing:4164988 In junction with my own holder for the cable chain tray. https://www.thingiverse.com/thing:4983433 for the purchased cable chain you must thrill 2x M3 screw threads in the 2 holes on top of the...
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This Thing uses the Blokhead of dpetsel https://www.thingiverse.com/thing:2759439 I needed a light source to see what the Printer is printing.... So there is a holder for a COB/LED Light strip of 5-7cm to enlight the nozzle. Enjoy it ;-)
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This is a modified Version of the aftab's cable chain tray: https://www.thingiverse.com/thing:4164988 enjoy it :-)
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
2
2.0
Mar 13, 2021
03/21
by
wayne andrews (wayneuk)
data
eye 2
favorite 0
comment 0
better fitting linear rail mount for e 5 & plus https://www.thingiverse.com/thing:4007552 also made a recess for the stock fan case mount filament load unload in marlin also increase temp to 210 for filament change define FILAMENT_CHANGE_UNLOAD_LENGTH 110 #endif #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 65 #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 5 #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 20 #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 20 #define...
Topics: 3D Printer Accessories, ender5+, thingiverse, ender5_plus, ENDER5 LINEAR RAIL, stl
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This Thing is for the cable chain tray from theaftab. It holds the cables for the direct drive unit just replace the original one with this item enjoy
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
3
3.0
Mar 15, 2021
03/21
by
Brian Barria (redpiyaya)
data
eye 3
favorite 0
comment 0
This is my remix of the hydra fan duct to fit the MicroSwiss Direct Drive Kit for Ender 5/plus. Everything should work. Offset X= -1 Y= -40
Topics: ender5pro, microswiss_ender5, thingiverse, creality_ender5_plus, Hydra, ender5plus,...
0
0.0
Apr 19, 2022
04/22
by
Kevin (yaikou)
data
eye 0
favorite 0
comment 0
As is the case with all my other designs, I never really felt that any of the other designs specifically suited my needs without drastically changing the components to the printer, beyond moving to the MSDD. I tried printed chains with trays, other fan mounts, etc, but ultimately was not terribly happy. Linear Rail Adapters - Tried to design as simplistic as possible. X-Axis adapter bolts directly into the MSDD from the rear. It must be attached to the hot end carrier plate before the linear...
Topics: 3D Printer Parts, thingiverse, microswiss, Ender5_Pro, MGN12H, microswiss_ender5, msdd,...
1
1.0
Dec 1, 2021
12/21
by
Jason Christensen (RedWhere2020)
data
eye 1
favorite 0
comment 0
UPDATE 23/11/2021 Most STL files have been uploaded with acrylic plans. For the side panels to enclose the frame you are best to do a measure and create your own plan for each panel. When ordering the 2020 extrusions make sure you can tap the center hole with an M5 tap. Do not make it M6... the box corner connectors do not work with M6 SHFHs. More to come soon. --- UPDATE 22/11/2021 I will do BOM for those interested with acrylic lid plans and all parts to be printed It will take me about a...
Topics: Ender 5 plus, Ender5_plus_Enclosure, Ender5plus_lid, Ender5+, thingiverse, Ender5+Lid, stl,...
2
2.0
Jun 10, 2021
06/21
by
Frank Leith (3dpatcanada)
data
eye 2
favorite 0
comment 0
Tired of your cables hitting the limit switch and messing up your printer ? This is the solution. Design by: 3DPAT.ca
Topics: 3DPAT, creality_ender5_plus, Ender5, ender5_plus, 3D Printer Parts, thingiverse, ender5plus, stl
2
2.0
Jan 6, 2021
01/21
by
Micah Langseth (mlangseth)
data
eye 2
favorite 0
comment 0
Ender 5 Plus tool holder. With bonus USB stick holder.
Topics: stl, ender5_plus, Ender5, thingiverse, 3D Printer Accessories
2
2.0
Oct 15, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 2
favorite 0
comment 0
This is a modified Version of Marty_Z's Case https://www.thingiverse.com/thing:4790166 I needed a Case where my SKR2.0 Board, my RaspberryPi (aka Octoprint) and a DCDC downstepper (LM2596 for the fan) has space in. So i modified the Case... Additionally i made some zip tie mounts for the cables. In the Case Cover i modified the Fan from a 4010 fan to a Noctua NF-A14 fan. https://noctua.at/de/nf-a14-pwm Thanks Marty_Z for the good work ;-) Hope you enjoy Update: New Version of Board Case,...
Topics: 3D Printers, thingiverse, stl, ender5plus, Ender5, ender5_plus
2
2.0
Apr 1, 2021
04/21
by
Steve Burcham (BGDog)
data
eye 2
favorite 0
comment 0
Display Mount System for the Ender 5 Plus with interchangeable display mounts.. It uses the same display mounts as my All-In-One Stand Alone Case. Print the mounting system once, then if you decide to change displays. Print a new mount, install it, and your done. LCD Displays Currently Supported and can be found here: https://www.thingiverse.com/thing:3999751 - LCD12864 the Original Creality Display - TFT35 Touchscreen: BTT TFT35 V3.0 Touch Screen Display - SD Card and USB are not accessable -...
Topics: creality_ender5_plus, thingiverse, ender5_plus lcd, 3D Printer Accessories, ender5_plus, stl,...
2
2.0
Apr 2, 2021
04/21
by
three (wc3po)
data
eye 2
favorite 0
comment 0
Simple clip-on attachment to help guide filaments drawn from unconventional locations (ie, a pegboard behind the printer)
Topics: thingiverse, Ender5, 3D Printer Accessories, Ender, stl, ender5_plus
2
2.0
Mar 15, 2021
03/21
by
Christoph Forstner (forsti94)
data
eye 2
favorite 0
comment 0
Topics: thingiverse, ender5_plus, stl, 3D Printer Parts, Ender5, MicroSwiss
2
2.0
Apr 27, 2021
04/21
by
Frank 3dPat (grouptcl)
data
eye 2
favorite 0
comment 0
Are you tired of your cable hitting the limit switch ? Install this and keep your cable in the right spot.
Topics: thingiverse, 3D Printer Parts, stl, ender5_plus, Ender5
2
2.0
Mar 16, 2021
03/21
by
Anthony Djekic (twanskys)
data
eye 2
favorite 0
comment 0
mounts to front frame with m3 t nuts and bolts
Topics: 3D Printing, thingiverse, tool, ender5_plus, stl, Ender5, tnut
3
3.0
May 1, 2021
05/21
by
jj jj (paydayxray)
data
eye 3
favorite 0
comment 0
Leveling feet for the Ender 5 Plus. A full set will require the following components: (2x) Part1-Mount-LH, (2x) Part2-Mount-RH, (4x) Part3-Foot, (4x) Part4-JamNut, (8x) M4x10 screws, (8x) M4 T-slot nuts. You can stick some foam tape or rubber dot to the bottom of the foot to prevent slipping on the table.
Topics: stl, Ender5, ender5plus, printer_feet, creality_ender5_plus, level, 3D Printer Accessories,...
1
1.0
Dec 14, 2021
12/21
by
Matt Gregory (grego33)
data
eye 1
favorite 0
comment 0
This is a simple pointer that clips onto the Z-Axis screw on Ender 5, Ender 5 Plus, or any other printer with an exposed z-screw of the same size. Useful for being able to quickly see bed leveling adjustments or on Ender 5 Plus and other printers with multiple z-screws, whether they are in sync. They clip right on to the z-screw and hold tight enough to stay put but not tight enough that they turn the z-screw. Make sure steppers aren't disabled before repositioning to be safe, especially on...
Topics: Ender5, ender5_plus, stl, thingiverse, ender5plus, 3D Printer Accessories
2
2.0
May 1, 2021
05/21
by
Steven Tedesco (EvoMakerIX)
data
eye 2
favorite 0
comment 0
No Support needed, 4 brackets needed for Ender 5-Plus I made this adapter to quickly fix the Z-Rod height on my Ender 5-Plus while using the Mini-Me Mosquito mount to avoid collisions. The BL Touch needs to be spaced down about 15mm to be used in that set up. These adapters allow you to unbolt the linear rod's lower bracket tension bolt and slide them down until they contact the floor surface plane and install these in place of the upper mounts. They press fit on just fine, but I did include...
Topics: stl, Ender5, ender5plus, 3D Printer Parts, thingiverse, ender5_plus
2
2.0
Jun 12, 2021
06/21
by
mathew baldwin (mbaldwin)
data
eye 2
favorite 0
comment 0
Traveling with your Ender 5 or 5 Plus or maybe you are just going to have it off for a while? Well once the power is off it's possible for the bed to drop without correcting those issues first. This part stops the bed from dropping past the bed's home position height. Configuration: Using the supplied STEP or F3D files you can set the position of the height to your Z home position. Installation: 1 - Home the printer 2 - Place the M5 T-Nut in place (in line with where you chose to place the...
Topics: Ender5, Creality, ender5_plus, thingiverse, ender5pro, 3D Printer Accessories, stl
2
2.0
May 1, 2021
05/21
by
Jongmun Lee (JongmunLee)
data
eye 2
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required. -------------------- front fan 4010 ender5 plus default fan 4010 fan grill right 5015 blower fan ender5 plus mod fix
Topics: stl, Ender5, ender5plus, 3D Printer Parts, thingiverse, ender5_plus
3
3.0
Mar 15, 2021
03/21
by
Casey Samplawski (CKS10mm)
data
eye 3
favorite 0
comment 0
Modified to fit Ender 5 Plus carriage and Orbiter extruder.
Topics: ender5pro, The_Orbiter, thingiverse, creality_ender5_plus, ender5plus, ender5_plus, stl, Ender5,...
2
2.0
Jan 5, 2021
01/21
by
Alex Lewis (alewy1212)
data
eye 2
favorite 0
comment 0
This is a multi tool holder designed to hold 3 pieces from a 3D Printer Clean up Knives Kit, 1 Bent Tweezer, 1 Carving Knife and 1 Blade Storage container, 1 TF Card and USB, and USB Cable. I clip this onto my Ender 5 Plus frame (~40mm)
Topics: stl, ender5_plus, tool_holder, Ender5, thingiverse, 3D Printer Accessories
2
2.0
Jan 7, 2021
01/21
by
Thomas Hotchkin (carbon3915)
data
eye 2
favorite 0
comment 0
Direct drive mount for Triangle Labs Dragon hotend and BMG extruder. Dragon is mounted directly to bracket for rigidity and one-handed nozzle changes. All stock Creality parts and hardware are reused. The limit switch needs to be adjusted slightly to account for the wider wheel spacing, but there is no loss of print area. This is the first revision, part cooling is not great with the stock duct and there is no strain relief. It was printed in PLA, but PETG or ABS would probably be better. Will...
Topics: stl, ender_5, 3D Printer Parts, ender5_plus, Ender5, thingiverse
3
3.0
Jan 7, 2021
01/21
by
J FL (STALKOS)
data
eye 3
favorite 0
comment 0
Protector BL-Touch stoper. Require: 1x screw M4x8 and T-Nuts M4 Buy Kit utility for future modification M screw assorting: https://www.amazon.ca/dp/B06XRFKNPQ/ref=sr_1_4?dchild=1&keywords=Hilitchi&sr=8-4&linkCode=gs2&tag=thingiverseca-20 T-nuts arsortimen: https://www.amazon.com/-/fr/gp/product/B077Z94V83/ref=ppx_yo_dt_b_asin_image_o04_s00?ie=UTF8&psc=1 Print PLA Rafts: No Supports:No Resolution: 0,12mm Thickness: 2mm Infill: 35% Speed: 50%
Topics: stl, ender5pro, creality_ender5_plus, BLTouch, crealityender5plus, ender5_plus, ender5plus, Ender5,...
3
3.0
Jan 9, 2021
01/21
by
Don Mirabella (bmwbykrydr)
data
eye 3
favorite 0
comment 0
I liked how this duct was laid out, but I also like to be able to see the hot end clearly while printing. So I've rotated the duct to the back of the assembly, made room for the lower roller and added some internal vanes so you don't need to use supports. I made this for my E5+. I do not know if it fits other E5 models.
Topics: ender5_plus, Creality, crealityender5plus, thingiverse, ender5plus, stl, creality_ender5_plus, 3D...
2
2.0
Jan 4, 2021
01/21
by
Functional Designs (MyFunctionalDesigns)
data
eye 2
favorite 0
comment 0
This is a remix of the STL posted by GiulianoM. Well, not really a remix, just a cleaned up version now in STEP format. Fusion F3D file included. Please note that as this is converted from an STL, this is "close enough". Due to the process of redrawing holes and replacing curvatures this has a tolerance of 0.1-0.2 mm. Use this as a guide, but please test your designs to make sure they work. The STL here is only because Thingiverse requires it. :)
Topics: microswiss_dd, stl, thingiverse, microswiss_ender5, MicroSwiss, ender5_microswiss, 3D Printer...
1
1.0
Nov 30, 2021
11/21
by
Jason Christensen (RedWhere2020)
data
eye 1
favorite 0
comment 0
UPDATE 16/11/2021 To BOM or Not to BOM? Uploaded new main stl file, individual stl's, a stp file and the aluminium panel plan. The two fans are quiet enough not to swap them out for Noctua type fans, you can hear them but they are not offensively loud. All the DIN mounts will be uploaded to a separate model as they are Voron remixes. --- UPDATE 11/11/2021 Some more photos of how it looks. Currently waiting on right angle usb cable from RPI to MCU to have the electronics case completed. The two...
Topics: thingiverse, ender5_plus, stl, crealityender5plus, 3D Printer Parts, creality_ender5_plus,...
3
3.0
Apr 2, 2021
04/21
by
Ralph Derksen (derksenr)
data
eye 3
favorite 0
comment 0
For Raspi 4 B with case 62 x 32 cm Mount on Ender 5 plus
Topics: ender, mount, thingiverse, Creality, Ender5, 3D Printer Accessories, stl, ender5_plus
1
1.0
Jan 18, 2022
01/22
by
Martin Strand (larsolovmartinstrand)
data
eye 1
favorite 0
comment 0
A new version that mounts on the aluminium backplate instead of using the same mounting as for the heatsink in the previous version. There are two versions, the only difference is the fan thickness,One version is made for 40x40x20mm fans and one version is made for 40X40X10mm fans. The heat from the heatsink is led away on one side instead of blowing everywhere so that the airflow doesn't intervene with the hotend. The screws are mounted from the backside of the plate's threaded holes which...
Topics: microswiss_ender5, cooling_fan, thingiverse, MicroSwissDirectDrive, fan_duct, Ender5, hotend, stl,...
2
2.0
May 1, 2021
05/21
by
Paul Tsigakis (paultsigakis)
data
eye 2
favorite 0
comment 0
Made this part as a replacement for the Kay3D part no 695, since I have removed the upper front crossbar. Left and right side are asymetric, due to different pulley height
Topics: stl, corexy, kay3d, Ender5, 3D Printer Parts, Core_XY, thingiverse, ender5_plus
2
2.0
Mar 31, 2021
03/21
by
Fedor Pikus (fpikus)
data
eye 2
favorite 0
comment 0
I rather liked the cable clips that came with my Ender 5+, but the printer comes with just four of them. I could not find the STL for it, so I made my own. Printed on Ender 5+ in PETG, it's flexible enough to easily clip into the frame.
Topics: cable_clip, thingiverse, Ender5, 3D Printer Accessories, ender5_plus, Ender, stl, ender5plus
2
2.0
Apr 8, 2021
04/21
by
Steven Kaye (skftw)
data
eye 2
favorite 0
comment 0
This is a remix of Paydayxray's direct drive extruder mount for the Ender 5 Plus. While his is designed for use with a stock hotend or a direct fit upgrade like a Microswiss, this is offset to allow it to fit with the ZestyTech Sidewinder V2 mount for an E3D V6 hotend. Compared to the original, it's offset by 15mm in the Y axis and 7mm in the X axis. ZestyTech Sidewinder mount is here: https://www.thingiverse.com/thing:3925473
Topics: 3D Printer Parts, stl, Ender5, ender_5_plus, thingiverse, ender5_plus, ender_5
1
1.0
Oct 29, 2021
10/21
by
Adam Jones (n00bl3s)
data
eye 1
favorite 0
comment 0
Good day everyone! I needed a case for my Octoprint Pi and I could not really find anything I truly liked. I needed something that I could mount to the front to route the camera and something I could get attached without taking anything apart. I had a case I used previously on my Ender 3 Pro and also a tool holder for my Ender 5 so why not combine the two?!?! I borrowed the clip idea from https://www.thingiverse.com/thing:4510163 and also the case from https://www.thingiverse.com/thing:3016364....
Topics: thingiverse, Octoprint, stl, octopi, Raspberry_Pi, ender5pro, ender5_plus, 3D Printer Accessories,...
1
1.0
Aug 22, 2021
08/21
by
Jacob Elliott (ibuildit88)
data
eye 1
favorite 0
comment 0
This is a linear rail mod for the Ender 5 Plus. It encompasses the XY&Z axis. I designed these parts because I was unhappy with most other mod variations of them. Z Axis - The Z axis part were designed using the BLV MGN Cube as a starting point. I can't find it to tag it as a remix though. I made this mod primarily because I kept having binding issues with the stock rods. Overall I believe it to be a much better setup and it has fixed all the issues I was having with Z axis lines. This mod...
Topics: ender5plus, ender5_plus, creality_ender5_plus, 3D_Printer_Parts, 3d_printer, Ender5, stl,...
3
3.0
Jan 16, 2021
01/21
by
Stewie Griffin (Stewie_Biatch)
data
eye 3
favorite 0
comment 0
This is a mount for dial indicator with shaft diameter of 8mm. It holds on three neodymium magnets 10x3. You can use it on every Ender 5 style extruder.
Topics: Ender5, ender5_plus, 3D Printer Accessories, Ender_3_Pro, thingiverse, creality_ender_3,...
2
2.0
Apr 1, 2021
04/21
by
wayne andrews (wayneuk)
data
eye 2
favorite 0
comment 0
required a bolt on version
Topics: th3d collection, thingiverse, 3D Printer Parts, Ender5, TH3DStudios, crealityender5plus, stl,...
3
3.0
Mar 15, 2021
03/21
by
Infinity Snek (InfinitySnek)
data
eye 3
favorite 0
comment 0
Hotend and part cooling fan for the MicroSwiss Direct Drive. It is tight in the X direction but you wont loose any build volume, Y is at 46mm not larger than stock. BL-Touch location: X: +8mm Y: -23mm Stuff needed * 2x 50x50x15 Fans * 6x M3x5 (if you dont have these M3x8 will work too) * 2X M3 insert (I used Ruthex if you have something else you may want to adjust the hole size for the part cooling duct) * 2x M4x23 * 2X M4 nut * Screws you got for the BL-Touch
Topics: ender5pro, thingiverse, part_cooler, ender5_plus, stl, 3D Printer Parts, Ender5, MicroSwiss
3
3.0
Apr 5, 2021
04/21
by
James Tongue (Hangtight)
data
eye 3
favorite 0
comment 0
An accurate model of the Creality Ender 5/5 Pro/ 5 Plus X carriage.
Topics: thingiverse, 3D Printer Parts, Creality_Ender_5, stl, Ender5, creality_ender5_plus
4
4.0
Apr 1, 2021
04/21
by
Bogdan Kecman (BogdanKecman)
data
eye 4
favorite 0
comment 0
extracted only the bed from the whuge detailed stl of the whole Ender5 as I don't need whole printer model inside a slicer with all the screws and belts and... bed is enough .. simplified the bed mode to cut down the number of polygons, it's still tad big for my taste but... origin of the file is set for my Ender5 that has 0,0 in the middle of the bed, minx,y are in the front left corner (so not rotated by 180 degrees as original ender3 with marlin) but you can rotate and move it as you like
Topics: Ender5, stl, 3D Printing, thingiverse
3
3.0
Jun 11, 2021
06/21
by
(wayneuk)
data
eye 3
favorite 0
comment 0
Summary just over a 1hr print depending on your setting s UNTESTED WORK IN PROGRESS fingers crossed i got it right just found a proven duct it were a simple fix and works Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: .25 .20 .28 Filament: various preft pet g or pla + up2u
Topics: thingiverse, Ender5, Ender_3, stl
2
2.0
May 21, 2021
05/21
by
Justin T5 (Tagals513)
data
eye 2
favorite 0
comment 0
Created this for my ender 5. Just took the original and pivoted the light bar piece to be 45 degrees so it can shine on the build plate. Print with a raft.
Topics: Ender5, thingiverse, stl, 3D Printing
3
3.0
Mar 15, 2021
03/21
by
samwiseg0 (samwiseg0)
data
eye 3
favorite 0
comment 0
This is a simple mod to the original backplate that allows for mounting right under the extruder in the stock position.
Topics: ender, ender5pro, thingiverse, ender5, filament, bigtreetech, ender5_plus, stl, sensor, 3D Printer...
2
2.0
Jul 3, 2021
07/21
by
Jason Jones (Darkace1337)
data
eye 2
favorite 0
comment 0
Raise up an Ender 5 Printer or any printer built on 20mm Aluminum Extrusion, Legs printed out of PLA 30% Feet printed out of Ninjaflex 100% Adds about 50 mm of clearence under the printer for storage purposes and/or fan mod's like Daede's Ender 5 Plus 120mm Fan Control Box Cover Attaches to the bottum rails with T nuts and M3 Screws (I uses M3x30 but you might be able to get away with 25mm long screws)
Topics: ender5_plus, feet, Ender5, Ender, printer_feet, 3D Printer Accessories, ender5pro, thingiverse, stl
2
2.0
Apr 1, 2021
04/21
by
Steve Burcham (BGDog)
data
eye 2
favorite 0
comment 0
This is a spacer for use with the Red double gear extruders. This extruder is taller than the original one Also you will need a short piece of Capricorn, about 15 mm, to have a smooth transition from the spacer thru the connector port to the extruder. Start long and trim a little off each time till it is just right. This may also work on the Ender 5 and the Ender 5 Pro
Topics: filament_guide, creality, thingiverse, creality ender 5 plus, Ender5, Ender5Plus, ender5_plus, 3D...
2
2.0
Mar 25, 2021
03/21
by
Paulo Torres (Ptorres2020)
data
eye 2
favorite 0
comment 0
This remix was made for my Ender 5 Plus, without the need of the Gantry Adapter plate, once i mix the Support Plate with the Original Base. With this instalation you don't need to change any offset, once the Hotend doesn't change the original place. I put the Fan Duct and the Fan Cover that i used like in the picture.
Topics: stl, ender5plus, thingiverse, ender5, herome_remix, ender5pro, ender5_plus, herome, 3D Printer...
1
1.0
Apr 19, 2022
04/22
by
Nathan Teuscher (nteuscher)
data
eye 1
favorite 0
comment 0
After installing the MicroSwiss all metal hotend and direct drive system the cables kept hitting the extruder and the filament lever. So I designed this cable guide that has an arm that rests on the extruder body and can be secured with an M3 x 15 screw and nut to the metal carriage. The hole for the metal carriage is threaded, but there isn't enough room on the back of the guide to accommodate the screw without hitting the x-stop. So I started the screw from the back and used a washer and nut...
Topics: thingiverse, microswiss_dd, creality_ender5_plus, 3D Printer Accessories, ender5plus, ender5_plus,...
3
3.0
Mar 15, 2021
03/21
by
Alexandr Alexandr (AlexMe)
data
eye 3
favorite 0
comment 0
Optical Z-axis sensor support for Ender 5. Holes for nuts M3.
Topics: stl, 3D Printers, Ender5, thingiverse
2
2.0
Apr 24, 2021
04/21
by
Wiesław Żuchaj (fodzio)
data
eye 2
favorite 0
comment 0
Base Ender 5 pro
Topics: 3D Printing, stl, Ender5, thingiverse
2
2.0
Mar 26, 2021
03/21
by
Tom Weise (Baal_)
data
eye 2
favorite 0
comment 0
This is an quick and dirty Ender 5 Plus feet-offset wich allows to use bigger Z Stepper motors. The stock stepper motors are in my opinion completely under-powered which leads to unnecessary noise. With an Duet Wifi @256 the stock ones are at least double as loud as the big steppers! As the big Z-steppers are not moved weight, this should be an no-brainer. I used the ~45 mm Z stepper motors of my old taken apart Wanhao Duplicator i3 v2.1 including the dampeners. under the bigger stepper motor...
Topics: stl, ender_5_plus, thingiverse, 3D Printer Accessories, ender_5, ender5_plus, Ender5
