2
2.0
Apr 1, 2021
04/21
by
Steve Burcham (BGDog)
data
eye 2
favorite 0
comment 0
Display Mount System for the Ender 5 Plus with interchangeable display mounts.. It uses the same display mounts as my All-In-One Stand Alone Case. Print the mounting system once, then if you decide to change displays. Print a new mount, install it, and your done. LCD Displays Currently Supported and can be found here: https://www.thingiverse.com/thing:3999751 - LCD12864 the Original Creality Display - TFT35 Touchscreen: BTT TFT35 V3.0 Touch Screen Display - SD Card and USB are not accessable -...
Topics: creality_ender5_plus, thingiverse, ender5_plus lcd, 3D Printer Accessories, ender5_plus, stl,...
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This is a Cable Holder for the Ender 5 Plus with linear rails and the Micro Swiss Direct Drive I use this cable chains 20x10mm: https://www.aliexpress.com/item/32999589537.html?spm=a2g0s.9042311.0.0.27424c4dZDh4ri I use the cable chain trays from theaftab: https://www.thingiverse.com/thing:4164988 In junction with my own holder for the cable chain tray. https://www.thingiverse.com/thing:4983433 for the purchased cable chain you must thrill 2x M3 screw threads in the 2 holes on top of the...
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This Thing uses the Blokhead of dpetsel https://www.thingiverse.com/thing:2759439 I needed a light source to see what the Printer is printing.... So there is a holder for a COB/LED Light strip of 5-7cm to enlight the nozzle. Enjoy it ;-)
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This is a modified Version of the aftab's cable chain tray: https://www.thingiverse.com/thing:4164988 enjoy it :-)
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Oct 29, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
This Thing is for the cable chain tray from theaftab. It holds the cables for the direct drive unit just replace the original one with this item enjoy
Topics: thingiverse, creality_ender5_plus, 3D Printers, ender5plus, stl, ender5_plus, Ender5
1
1.0
Nov 30, 2021
11/21
by
Jason Christensen (RedWhere2020)
data
eye 1
favorite 0
comment 0
UPDATE 16/11/2021 To BOM or Not to BOM? Uploaded new main stl file, individual stl's, a stp file and the aluminium panel plan. The two fans are quiet enough not to swap them out for Noctua type fans, you can hear them but they are not offensively loud. All the DIN mounts will be uploaded to a separate model as they are Voron remixes. --- UPDATE 11/11/2021 Some more photos of how it looks. Currently waiting on right angle usb cable from RPI to MCU to have the electronics case completed. The two...
Topics: thingiverse, ender5_plus, stl, crealityender5plus, 3D Printer Parts, creality_ender5_plus,...
1
1.0
Apr 19, 2022
04/22
by
Nathan Teuscher (nteuscher)
data
eye 1
favorite 0
comment 0
After installing the MicroSwiss all metal hotend and direct drive system the cables kept hitting the extruder and the filament lever. So I designed this cable guide that has an arm that rests on the extruder body and can be secured with an M3 x 15 screw and nut to the metal carriage. The hole for the metal carriage is threaded, but there isn't enough room on the back of the guide to accommodate the screw without hitting the x-stop. So I started the screw from the back and used a washer and nut...
Topics: thingiverse, microswiss_dd, creality_ender5_plus, 3D Printer Accessories, ender5plus, ender5_plus,...
2
2.0
Jun 10, 2021
06/21
by
Frank Leith (3dpatcanada)
data
eye 2
favorite 0
comment 0
Tired of your cables hitting the limit switch and messing up your printer ? This is the solution. Design by: 3DPAT.ca
Topics: 3DPAT, creality_ender5_plus, Ender5, ender5_plus, 3D Printer Parts, thingiverse, ender5plus, stl
2
2.0
Jun 10, 2021
06/21
by
Dovod Dovodov (ddovod)
data
eye 2
favorite 0
comment 0
[Demo](https://youtu.be/RVPKp-yUJQA) ### Info I've tried brass brushes, but they're limited in size (if you use some common brushes available widely) and the melted filament stick too much to the wires so it's hard to remove it. This is a cleaner I came up with. Apart from printed parts you should cast a silicone brush using one-time mold (cast, destroy the mold, use your silicone part). Also this cleaner occupies only ~1cm of printing surface if you bend it and move outside of the print bed...
Topics: creality_ender5_plus, ender5_plus, stl, nozzle, thingiverse, nozzleclean, ender5plus, 3D Printer...
2
2.0
Mar 15, 2021
03/21
by
Marcus Tischler (Lamar1007)
data
eye 2
favorite 0
comment 0
Filamentsensor adapter plate 6mm thick when you upgrade to an dual gear extruder
Topics: thingiverse, Filamentsensor, creality_ender5_plus, ender5plus, Creality, ender5_plus, stl,...
0
0.0
Apr 19, 2022
04/22
by
Derek Burket (sick4noise)
data
eye 0
favorite 0
comment 0
If you've got an old smart phone lying around, why not reuse it as a touchscreen for KlipperScreen or OctoScreen. This model is designed to fit a Vizio xr6m10 tablet (5.5 x 3.5 x 0.2 inches), but you can easily update the model to work with other phones/tablets by tweaking the [Tinkercad design](https://www.tinkercad.com/things/bvGZntJ7KL3-ender-5-plus-phone-mount). You'll likely need to modify both the dimensions of the frame that secures the device to the mount as well as the size of the...
Topics: thingiverse, creality_ender5_plus, 3D Printer Accessories, crealityender5plus, ender5plus,...
3
3.0
May 1, 2021
05/21
by
jj jj (paydayxray)
data
eye 3
favorite 0
comment 0
Leveling feet for the Ender 5 Plus. A full set will require the following components: (2x) Part1-Mount-LH, (2x) Part2-Mount-RH, (4x) Part3-Foot, (4x) Part4-JamNut, (8x) M4x10 screws, (8x) M4 T-slot nuts. You can stick some foam tape or rubber dot to the bottom of the foot to prevent slipping on the table.
Topics: stl, Ender5, ender5plus, printer_feet, creality_ender5_plus, level, 3D Printer Accessories,...
3
3.0
Mar 17, 2021
03/21
by
Jakub Mirola (J4CK3D)
data
eye 3
favorite 0
comment 0
A simple yet useful cover for stepper motor on Ender 5 Plus. It will protect your motor interior from unwanted mess (dust, crumbs, etc.) which could potentially stop it from running smoothly it in the future. If printed in a nice color it looks really cool. After installation make sure there is a little gap between the cover and the leading screw connector (as seen on the picture from the side). Cover comes in two variants. One is "open" version which you can access directly on the...
Topics: stepper_motor, motor, accessories, cover, 3D Printer Accessories, stl, thingiverse,...
2
2.0
Jun 22, 2021
06/21
by
Elliot Tai (Achocho)
data
eye 2
favorite 0
comment 0
A simple tool for you to align the dual z axis on your Ender 5 Plus. Print 4 of these and place on the smooth rods. You can print the block in solid or without top and bottom. If you only have 1 stepper driver for dual Z and cannot preform Marlin G34, this is the right tool for you. 1) lower your bed and place the blocks 2) rise the bed all the way to the top 3) rise a little more until those 4 blocks hitting the rod mount (warning! It will grind a little!) https://youtu.be/lDOoRAU-rhA
Topics: stl, thingiverse, ender5plus, E5P, ender5_plus, ender 5 plus, creality_ender5_plus, 3D Printer...
3
3.0
Jan 5, 2021
01/21
by
dave landry (STALKOS)
data
eye 3
favorite 0
comment 0
Ender 5 Plus bug Fillament Sensor, corrector of the sensor fillament, and spacer,
Topics: stl, fillament_runout, creality_ender5_plus, fillament_guide, crealityender5plus, ender5_plus, 3D...
2
2.0
Mar 15, 2021
03/21
by
Casey Samplawski (CKS10mm)
data
eye 2
favorite 0
comment 0
Modified to fit Ender 5 Plus carriage and Orbiter extruder.
Topics: ender5pro, The_Orbiter, thingiverse, creality_ender5_plus, ender5plus, ender5_plus, stl, Ender5,...
2
2.0
Jun 6, 2021
06/21
by
Jason Christensen (RedWhere2020)
data
eye 2
favorite 0
comment 0
Z-Axis Thrust Bearing Housing for 8mm lead screw. 1. All I'm supplying here is the thrust bearing housing and its parts. 2. The bearer rail 'stl' file is available if you want to do the same upgrade. 3. There is no loss of print height with this upgrade. 4. As part of my upgrades the bed is just one of them I'm yet to install. I will update as soon as I have installed it. Background... I had trouble with the bed tilting whenever I cleaned it. It did not move much but it did move and I could not...
Topics: thingiverse, stl, 3D Printing, creality_ender5_plus
1
1.0
Nov 30, 2021
11/21
by
Phoenix 131 (tphoenix_131)
data
eye 1
favorite 0
comment 0
enjoy it :-)
Topics: thingiverse, ender5_plus, 3D Printers, stl, ender5plus
2
2.0
Mar 31, 2021
03/21
by
Matt Copper (mjcopper)
data
eye 2
favorite 0
comment 0
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Ender 5 Plus run out sensor bracket for dual drive extruder (BMG type). Bracket places run out sensor at correct offset for use with dual drive extruder like the BMG. Adds filament guide. Link to Ender 5 Plus firmware config and cable management photos. https://www.thingiverse.com/thing:4544301
Topics: ender5_plus, 3D Printer Parts, stl, thingiverse
2
2.0
Apr 2, 2021
04/21
by
Jon Salisbury (Doloth)
data
eye 2
favorite 0
comment 0
The official Creality all metal extruder upgrade (Pictured) sits slightly wider than the stock plastic Ender 5 plus extruder and as such the filament exiting from the filament runout sensor does not align with the new metal extruder. I made a simple 1.8mm thick spacer to better align the filament and avoid any undue strain, tension or rubbing. You can reuse the stock screws, they are long enough.
Topics: ender_5_plus, creality_ender5_plus, Creality_Ender_5_Plus, thingiverse, 3D Printer Parts,...
3
3.0
Jan 7, 2021
01/21
by
J FL (STALKOS)
data
eye 3
favorite 0
comment 0
Protector BL-Touch stoper. Require: 1x screw M4x8 and T-Nuts M4 Buy Kit utility for future modification M screw assorting: https://www.amazon.ca/dp/B06XRFKNPQ/ref=sr_1_4?dchild=1&keywords=Hilitchi&sr=8-4&linkCode=gs2&tag=thingiverseca-20 T-nuts arsortimen: https://www.amazon.com/-/fr/gp/product/B077Z94V83/ref=ppx_yo_dt_b_asin_image_o04_s00?ie=UTF8&psc=1 Print PLA Rafts: No Supports:No Resolution: 0,12mm Thickness: 2mm Infill: 35% Speed: 50%
Topics: stl, ender5pro, creality_ender5_plus, BLTouch, crealityender5plus, ender5_plus, ender5plus, Ender5,...
4
4.0
Jan 6, 2021
01/21
by
J FL (STALKOS)
data
eye 4
favorite 0
comment 0
Extruder Cable Relief, suitable for ENDER 5+ Require: 1x screw M3x12 and 2x small zip ties M screw assorting: https://www.amazon.com/Hilitchi-460-Piece-Stainless-Button-Assortment/dp/B06XRFKNPQ/ref=sr_1_4?dchild=1&keywords=Hilitchi&qid=1606013816&sr=8-4 Print PLA Rafts: No Supports: Yes Resolution: 0,12mm Thickness: 2mm Infill: 35% Speed: 50%
Topics: cable_management, stl, creality_ender5_plus, cable_guide, crealityender5plus, ender5_plus,...
2
2.0
Jan 7, 2021
01/21
by
Isaac Kailola (isaackailola)
data
eye 2
favorite 0
comment 0
This print is made for testing whether you have set your bed correctly or not.
Topics: stl, 3D Printing Tests, ender5_plus, thingiverse, bedleveling
2
2.0
Jan 9, 2021
01/21
by
Don Mirabella (bmwbykrydr)
data
eye 2
favorite 0
comment 0
I liked how this duct was laid out, but I also like to be able to see the hot end clearly while printing. So I've rotated the duct to the back of the assembly, made room for the lower roller and added some internal vanes so you don't need to use supports. I made this for my E5+. I do not know if it fits other E5 models.
Topics: ender5_plus, Creality, crealityender5plus, thingiverse, ender5plus, stl, creality_ender5_plus, 3D...
2
2.0
Oct 15, 2021
10/21
by
Phoenix 131 (tphoenix_131)
data
eye 2
favorite 0
comment 0
This is a modified Version of Marty_Z's Case https://www.thingiverse.com/thing:4790166 I needed a Case where my SKR2.0 Board, my RaspberryPi (aka Octoprint) and a DCDC downstepper (LM2596 for the fan) has space in. So i modified the Case... Additionally i made some zip tie mounts for the cables. In the Case Cover i modified the Fan from a 4010 fan to a Noctua NF-A14 fan. https://noctua.at/de/nf-a14-pwm Thanks Marty_Z for the good work ;-) Hope you enjoy Update: New Version of Board Case,...
Topics: 3D Printers, thingiverse, stl, ender5plus, Ender5, ender5_plus
2
2.0
Jan 6, 2021
01/21
by
Micah Langseth (mlangseth)
data
eye 2
favorite 0
comment 0
Ender 5 Plus tool holder. With bonus USB stick holder.
Topics: stl, ender5_plus, Ender5, thingiverse, 3D Printer Accessories
2
2.0
Apr 27, 2021
04/21
by
Frank 3dPat (grouptcl)
data
eye 2
favorite 0
comment 0
Are you tired of your cable hitting the limit switch ? Install this and keep your cable in the right spot.
Topics: thingiverse, 3D Printer Parts, stl, ender5_plus, Ender5
2
2.0
Jan 3, 2021
01/21
by
Scott Holden (SACH369)
data
eye 2
favorite 0
comment 0
This is a side frame mount that I designed for the Palette 2S to attach to the Ender 5 Plus. The file was designed in Fusion 360 and printed in PLA with 30% infill. I attached the included Palette 2S mount to the printed mount using self tapping screws. The printed mount is attached to the 5 Plus with (x6) M4 bolts and T Nuts. I've included the .stl as well as the fusion 360 file.
Topics: palette, mosaic, stl, creality_ender5_plus, ender5_plus, Palette2, ender5plus, Mosaic_Palette_2,...
1
1.0
Aug 22, 2021
08/21
by
Jacob Elliott (ibuildit88)
data
eye 1
favorite 0
comment 0
This is a linear rail mod for the Ender 5 Plus. It encompasses the XY&Z axis. I designed these parts because I was unhappy with most other mod variations of them. Z Axis - The Z axis part were designed using the BLV MGN Cube as a starting point. I can't find it to tag it as a remix though. I made this mod primarily because I kept having binding issues with the stock rods. Overall I believe it to be a much better setup and it has fixed all the issues I was having with Z axis lines. This mod...
Topics: ender5plus, ender5_plus, creality_ender5_plus, 3D_Printer_Parts, 3d_printer, Ender5, stl,...
1
1.0
Jan 18, 2022
01/22
by
Giovanni Murphy (bolts4brekfast)
data
eye 1
favorite 0
comment 0
This spacer/bracket is to move the filament sensor so that it can be used with the Micro Swiss Dual Gear extruder on an Ender 5 plus/pro. Use 2 M3x8 screws to mount the spacer to the stock bracket. And 2 M3x20 screws and nuts to mount the sensor to the spacer. Update: Added V2 of the design which adds 2 3mm x 10mm posts for the second set of holes in the sensor - these posts will keep the sensor locked in place along with the 2 screws that were already in the original design.
Topics: spacer, bracket, thingiverse, mount, Creality_Ender_5, extruder, stl, MicroSwiss,...
2
2.0
Jan 16, 2021
01/21
by
Stewie Griffin (Stewie_Biatch)
data
eye 2
favorite 0
comment 0
This is a mount for dial indicator with shaft diameter of 8mm. It holds on three neodymium magnets 10x3. You can use it on every Ender 5 style extruder.
Topics: Ender5, ender5_plus, 3D Printer Accessories, Ender_3_Pro, thingiverse, creality_ender_3,...
2
2.0
Apr 1, 2021
04/21
by
Steve Burcham (BGDog)
data
eye 2
favorite 0
comment 0
This is a spacer for use with the Red double gear extruders. This extruder is taller than the original one Also you will need a short piece of Capricorn, about 15 mm, to have a smooth transition from the spacer thru the connector port to the extruder. Start long and trim a little off each time till it is just right. This may also work on the Ender 5 and the Ender 5 Pro
Topics: filament_guide, creality, thingiverse, creality ender 5 plus, Ender5, Ender5Plus, ender5_plus, 3D...
2
2.0
Apr 2, 2021
04/21
by
three (wc3po)
data
eye 2
favorite 0
comment 0
Simple clip-on attachment to help guide filaments drawn from unconventional locations (ie, a pegboard behind the printer)
Topics: thingiverse, Ender5, 3D Printer Accessories, Ender, stl, ender5_plus
1
1.0
Jan 19, 2022
01/22
by
Christian Hauser (chiefmaster81)
data
eye 1
favorite 0
comment 0
First goal: Side Feet I remixed it from https://www.thingiverse.com/thing:3633007 and modified to fit on 2020 rails in order to flip my Ender 5 to the side for accessing the Mainboard without the belt-tentioner touching the workbench. 2nd goal: Squash Feet replacing the original rubber feet with Sqash Feet ( 2 yellow ) in order to absorb kinetic vibration energy to make the preinter more silent without spending 80 bucks for silent mainboard. both: printed PLA with 30% infill for stability and...
Topics: thingiverse, feet, squash, stl, 3D Printer Parts, ender5_plus
2
2.0
Mar 15, 2021
03/21
by
Christoph Forstner (forsti94)
data
eye 2
favorite 0
comment 0
Topics: thingiverse, ender5_plus, stl, 3D Printer Parts, Ender5, MicroSwiss
1
1.0
Jan 19, 2022
01/22
by
Daniel Frearson (The_Athereon)
data
eye 1
favorite 0
comment 0
My Ender 5 Plus is a great printer with a very rigid frame. Problem is, my apartment doesn't have a single level floor in the building. My printer is lopsided and that gave me strange artefacts in printing. So I designed this to keep the lower half of the frame square and that solved my problem in one go. This model is designed to clamp to the lower frame only. For the upper frame, one side of the mount would have to be open as it would clamp down over the belts. A simple modification if you...
Topics: thingiverse, stl, ender5pro, ender5plus, 3D Printer Accessories, ender5_plus
2
2.0
Mar 16, 2021
03/21
by
Anthony Djekic (twanskys)
data
eye 2
favorite 0
comment 0
mounts to front frame with m3 t nuts and bolts
Topics: 3D Printing, thingiverse, tool, ender5_plus, stl, Ender5, tnut
2
2.0
May 1, 2021
05/21
by
Jongmun Lee (JongmunLee)
data
eye 2
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required. -------------------- front fan 4010 ender5 plus default fan 4010 fan grill right 5015 blower fan ender5 plus mod fix
Topics: stl, Ender5, ender5plus, 3D Printer Parts, thingiverse, ender5_plus
1
1.0
Dec 14, 2021
12/21
by
Matt Gregory (grego33)
data
eye 1
favorite 0
comment 0
This is a simple pointer that clips onto the Z-Axis screw on Ender 5, Ender 5 Plus, or any other printer with an exposed z-screw of the same size. Useful for being able to quickly see bed leveling adjustments or on Ender 5 Plus and other printers with multiple z-screws, whether they are in sync. They clip right on to the z-screw and hold tight enough to stay put but not tight enough that they turn the z-screw. Make sure steppers aren't disabled before repositioning to be safe, especially on...
Topics: Ender5, ender5_plus, stl, thingiverse, ender5plus, 3D Printer Accessories
2
2.0
May 1, 2021
05/21
by
Daniel Edwards (jerryfudd)
data
eye 2
favorite 0
comment 0
Purpose: - Very Simple Adapter for Fitting the Meanwell RSP-500-24 into the Ender 5 Plus Case - Included Blanking Plate for Voltage Selector Notes: - 4x M4x4mm Button Head Bolts for Case Fixing - 4x M5x5mm Countersunk Hex Bolts for PSU Fixing - Blanking Plate Will Be Held By Pressure of PSU Against It
Topics: stl, crealityender5plus, Meanwell_RSP_500_24, ender5plus, creality_ender5_plus, rsp-500-24, 3D...
2
2.0
May 1, 2021
05/21
by
Steven Tedesco (EvoMakerIX)
data
eye 2
favorite 0
comment 0
No Support needed, 4 brackets needed for Ender 5-Plus I made this adapter to quickly fix the Z-Rod height on my Ender 5-Plus while using the Mini-Me Mosquito mount to avoid collisions. The BL Touch needs to be spaced down about 15mm to be used in that set up. These adapters allow you to unbolt the linear rod's lower bracket tension bolt and slide them down until they contact the floor surface plane and install these in place of the upper mounts. They press fit on just fine, but I did include...
Topics: stl, Ender5, ender5plus, 3D Printer Parts, thingiverse, ender5_plus
3
3.0
Mar 2, 2021
03/21
by
Giuliano Moschini (GiulianoM)
data
eye 3
favorite 0
comment 0
If you have an Ender 5 Plus, and you install the Printermods MDD 1.2 direct drive plate, you will find that the stock metal BLTouch mounting plate doesn't fit. None of the other printed BLTouch mounts fit, so I just modified the metal one. Instructions: Grind or file off 2mm of the top edge of the bracket so it fits under the extruder mounting block. Enlarge the center hole down and to the left so that it clears the screw head for the wheel. That's it. The offset for the BLTouch remains the...
Topics: mdd, thingiverse, stl, ender5_plus, 3D Printer Parts, BLTouch
0
0.0
Apr 20, 2022
04/22
by
Joep Scheerlings (Juuup)
data
eye 0
favorite 0
comment 0
I created this cable chain and brackets so that you can finally make sure you wires are not caught on the side of the bed or break due to tension. The parts are a tight fit. Thats how they stay in place. I printed 40 chains for my top side chain. If you have space left you can get you bowden tube in there as well. But mine is cut too short. (my bad).. Use how you like. And if you want you can support me here. https://www.buymeacoffee.com/Juuup Will be much appreciated!
Topics: Ender, thingiverse, cable_management, Ender 5+, Ender5+, Chain, creality_ender5_plus, 3D Printer...
2
2.0
Jun 12, 2021
06/21
by
mathew baldwin (mbaldwin)
data
eye 2
favorite 0
comment 0
Traveling with your Ender 5 or 5 Plus or maybe you are just going to have it off for a while? Well once the power is off it's possible for the bed to drop without correcting those issues first. This part stops the bed from dropping past the bed's home position height. Configuration: Using the supplied STEP or F3D files you can set the position of the height to your Z home position. Installation: 1 - Home the printer 2 - Place the M5 T-Nut in place (in line with where you chose to place the...
Topics: Ender5, Creality, ender5_plus, thingiverse, ender5pro, 3D Printer Accessories, stl
1
1.0
May 1, 2021
05/21
by
Yves Penfornis (Iveusse)
data
eye 1
favorite 0
comment 0
This is a mix of the direct drive mount from paydayxray (https://www.thingiverse.com/thing:4310609) and the hot end side link from Gnizten (https://www.thingiverse.com/thing:4116655) This version has a 9mm Y offset to be compatible with HeroMe Gen 5
Topics: stl, Herome_gen5, crealityender5plus, Creality_Ender_5_Plus, ender5plus, ender_5_plus,...
1
1.0
Sep 13, 2021
09/21
by
Arthur Greenarrow (Ofthegreenarrow)
data
eye 1
favorite 0
comment 0
Made this to hold a small spray bottle that I have rubbing alcohol in for cleaning my build plate. It clips in to the ender frame.
Topics: stl, thingiverse, 3D Printer Accessories, bottle_holder, ender5_plus, Ender
2
2.0
Jan 20, 2021
01/21
by
Russ Wa (twistedview)
data
eye 2
favorite 0
comment 0
This is a mount to allow you to put a BTT TFT35 v3.5 screen in the Ender 5 Plus. It is slightly recessed so that you don't have to cut a notch in the opening for the dial.
Topics: 3D Printer Parts, ender5_plus, BIGTREETECH_TFT35, thingiverse, stl, ender5plus
2
2.0
Jan 5, 2021
01/21
by
Alex Lewis (alewy1212)
data
eye 2
favorite 0
comment 0
This is a multi tool holder designed to hold 3 pieces from a 3D Printer Clean up Knives Kit, 1 Bent Tweezer, 1 Carving Knife and 1 Blade Storage container, 1 TF Card and USB, and USB Cable. I clip this onto my Ender 5 Plus frame (~40mm)
Topics: stl, ender5_plus, tool_holder, Ender5, thingiverse, 3D Printer Accessories
2
2.0
Mar 31, 2021
03/21
by
Seve Quinn (FabQuinn)
data
eye 2
favorite 0
comment 0
I recently bought a Winsinn Duel Gear Extruder. After installation I noticed the filament runout did not line up with the new extruder. So I made a quick adapter. Hopes this helps you all. Thanks! UDATE January 5, 2020: I did NOT include this on the original posting. PLEASE note you will need new screws to mount this. I used M3x20mm counter sink screws. https://www.amazon.com/gp/product/B07SY745CF/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Topics: thingiverse, 3D Printer Parts, ender5_plus, Ender-5, stl, ender5plus
1
1.0
Apr 20, 2022
04/22
by
SEB_FR FR (SEB_FR)
data
eye 1
favorite 0
comment 0
Extruder arm
Topics: Ender, thingiverse, Ender5, 3D Printer Extruders, extruder, arm, creality_ender5_plus, ender_5,...
