3
3.0
Apr 20, 2021
04/21
by
Tyler Durden (knoxieman)
data
eye 3
favorite 0
comment 0
Having moved my reel to the side of the machine I wasn't quite getting the path in to the extruder that I liked so I designed a slide on extension reel that simply slides over the existing reel and pushes flush to the end of the bracket, this gives the reel about 40mm more lateral movement towards the front which really helps filament alignment, the finishing touch being the push fit logo emblazoned end cap. This can be fitted regardless of the position of the reel unless you have some very...
Topics: thingiverse, 3D Printer Parts, stl, ender 3 pro filament, ender 3 reel, ender 3 pro spool, ender 3,...
3
3.0
Mar 19, 2021
03/21
by
Colin Davis (Colin_3D)
data
eye 3
favorite 0
comment 0
I was originally inspired by MrClown's design, It looked great however it was a bit cramped and didn't have an SD Card holder included so I redesigned my own version from the ground up.
Topics: creality_ender_3, ender_3_case, ender_3_mods, Ender_3, Creality, thingiverse, Ender_3_Pro, 3D...
3
3.0
Jul 3, 2021
07/21
by
Rickie Hunt (ravendna)
data
eye 3
favorite 0
comment 0
First Remix Sorry If I Post It Wrong Modified Design Fits Ender 3/Pro/V2
Topics: creality_ender_3, ender_3_v2, Ender_3, Parts, thingiverse, stl
5
5.0
Mar 17, 2021
03/21
by
Hampus Andersson (haand001)
data
eye 5
favorite 0
comment 0
Easy to install Z-rod support with filament guide. All you need is a skateboard bearing (size 608). Install guide: - Insert bearing into printed part - Unscrew the top two screws above the z-rod using a 4mm allen wrench - Mount the printed part - Fasten the printed part with the screws using the same allen wrench. For more threads in contact, please remove the washers on the screws.
Topics: Creality, ender_3_filament, Ender, creality_ender_3, Ender_3, ender_3_accessories, Ender_3_Pro, 3D...
3
3.0
Mar 25, 2021
03/21
by
Justus Rawert (Shootraw)
data
eye 3
favorite 0
comment 0
This spacer is only for Ender 3 Pro and is only verified to work with damper pictured above. Modification of printer is required for proper function but can all be reversed if needed. The 2 long M3 bolt needed for this install can be obtained during installation of X-Axis damper Mod by matthijsp (https://www.thingiverse.com/thing:3271077), which is a nice plug-and-play upgrade and leaves you with 2 spare bolts Installation instruction can be found below.
Topics: stl, ender_3_upgrade, creality_ender_3, thingiverse, damper, Ender_3_Pro, Ender_3, Ender_3_damper,...
2
2.0
Apr 24, 2021
04/21
by
Ryan van den Bogaard (KuroPSPiso)
data
eye 2
favorite 0
comment 0
This is a fan silencer for if you mod the Ender 3's PSU. It will inhibit intake and exhaust at around 20% efficiency loss. The design is intercooler focused. Completion time of can be done on a fast setting and finished in 1-1.5hrs. [EXHAUST ONLY] Depending on how the fan is installed in the PSU (don't know if this variable). Mine was configured to pull air trough the ventilation holes and out the fan (acting as an exhaust). check the flow of the PSU with a piece of paper.
Topics: fan_silencer_ender_3, stl, Ender_3, thingiverse, ender_3_upgrade, 3D Printer Accessories,...
4
4.0
Mar 17, 2021
03/21
by
Kristian King (Krusty84)
data
eye 4
favorite 0
comment 0
Another Ender 3 Cover! This time with directional arrows to aid with bed levelling. The arrow inserts are there as an option, remember to print them in a different colour to stand out!
Topics: Creality, Ender_3_Fan_Cover, Ender_3, creality_ender_3, ender_3_accessories, 3D Printer Parts, stl,...
2
2.0
Jan 8, 2021
01/21
by
Giacomo Imbrogno (Jake90)
data
eye 2
favorite 0
comment 0
feet for ender 3 35x20
Topics: feet_ender_3_v2, creality_ender_3_v2, 3D Printing, stl, Ender_3, thingiverse, ender_3_v2,...
1
1.0
Oct 29, 2021
10/21
by
Amandeep Saini (Amandeep_3d)
data
eye 1
favorite 0
comment 0
Ender 3 Drawer for 40mm rail
Topics: thingiverse, Ender 3 Drawer, Ender 3 V2, drawer, stl, Ender_3_Cabinet, 3D Printer Accessories,...
4
4.0
Mar 3, 2021
03/21
by
Peter Pan (Warsenius)
data
eye 4
favorite 0
comment 0
Remix of ilya_tsaryuk control box edge cover but now for Ender 3pro. v1.0 has the original tightness, v1.1 is a little bit smaller. Simple cover to protect cables from being cut by sharp edges of extrusion. Cutaway in my extrusion is 25x15mm. Please check your dimensions before printing. You can remove the control box for easier access. Print two copies and snap them into extrusion, could be a little hard, just push them harder and they'll sit there forever :D
Topics: creality_ender_3_pro, 3D Printer Accessories, thingiverse, ender-3, Ender_3_Pro, stl, Ender_3,...
4
4.0
Mar 4, 2021
03/21
by
jesus lopez norte (zorroronoa)
data
eye 4
favorite 0
comment 0
Aqui os dejo un kit de mejoras para la creality ender 3 junto con el vídeo donde os muestro como instalarlas espero que os sirvan este kit es una recopilación de distintas fuentes las cito a continuación: Guia Varilla Eje Z: https://www.thingiverse.com/thing:304... Cubre Railes V-Slot: https://www.thingiverse.com/thing:832077 Cadenas para cables: https://www.thingiverse.com/thing:2920060 Tapa para Perfil 4040: https://www.thingiverse.com/thing:3180189 Marco para LCD:...
Topics: mejoras ender 3, kit upgrades ender 3, mods ender 3, creality ender, 3D Printer Accessories,...
2
2.0
Jan 5, 2021
01/21
by
Den Fedorin (denmastre)
data
eye 2
favorite 0
comment 0
Screen mount for Ender 3 / 3 Pro in screen style on Ender 3 V2
Topics: stl, creality_ender_3, ender_3_upgrade, Ender_3, Ender_3_display, thingiverse, ender3pro, Ender3,...
2
2.0
Jan 7, 2021
01/21
by
Leif Lumby Henriksen (LeifLumbyHenriksen)
data
eye 2
favorite 0
comment 0
Beslag til Filament Holder, Ender 3, Ender 3 Pro m.m.
Topics: 3D Printing, stl, creality_ender_3, Ender_3, creality_ender_3_pro, thingiverse, Ender_3_Pro
4
4.0
Jun 12, 2021
06/21
by
(jerryfudd)
data
eye 4
favorite 0
comment 0
Summary I somehow managed to land my hot extruder nozzle onto the original plastic bed corner making a lovely burn dip in it so was searching for a replacement. I took the bed corner from johnniewhiskey's cable chain and cut off the chain fitting (I don't have enough clearance to the rear to fit the chain assembly) which did the job perfectly coupled with (im my case) onpdm's remix for a Ender 3 Pro corner http://www.thingiverse.com/thing:3473455 I also did an extended version that touches the...
Topics: thingiverse, Ender_3_Pro, Ender_3, stl
4
4.0
Mar 17, 2021
03/21
by
Hampus Andersson (haand001)
data
eye 4
favorite 0
comment 0
This thing is perfect together with this: https://www.thingiverse.com/thing:3353354 or by itself. What you will need is 2 neodym magnets 8mm in diameter and 3mm thick. I will also work with thinner magnets. The 7mm socket used for changing nozzles will neatly snap to the holder, centering it nicely! Don't forget to print it with support.
Topics: Ender, creality_ender_3, Ender_3, ender_3_accessories, creality_ender_3_pro, Ender_3_Pro, 3D...
4
4.0
Jun 12, 2021
06/21
by
(benebrady)
data
eye 4
favorite 0
comment 0
Summary Ok, here it is... Finally! This one was a difficult one because there is SO LITTLE clearance between the filament feed opening and the lead screw on the Ender 3 or Ender 3 Pro. But we got it done. This bracket will mount the filament runout switch available from several vendors I found mine from Amazon.https://www.amazon.com/XCSOURCE-Printer-Filament-Detection-TE720/dp/B06ZZ5YXM6 I have also seen the same switch available on AliExpresshttps://www.aliexpress.com/item/33029742626.html You...
Topics: Ender_3, creality_ender_3, SeeMeCNC, thingiverse, creality_ender_3_pro, stl
2
2.0
Jun 11, 2021
06/21
by
Segun Akin-Olugbade (segunakino)
data
eye 2
favorite 0
comment 0
I changed my magnetic bed to a glass bed and did not want to use metal clips. I printed three of the bed end stops shown here. I did not fit one on the side with the wiring for the heater element, as shown in the image. These end stops were glued to the underside of the bed, as shown in the images, using a two-part epoxy adhesive. The PSU caddy is required to make the PSU parallel with the bed. Otherwise, the end stop on that side will foul the PSU. I have provided two versions of the PSU...
Topics: Ender_3, creality_ender_3, Ender_3_Pro, 3D Printer Parts, thingiverse, creality_ender_3_pro, stl
2
2.0
Jan 9, 2021
01/21
by
Miguel Piedrahita (miguelpie)
data
eye 2
favorite 0
comment 0
This simple tool holder holds the spatula, the cutters, and a stick of Magigoo. To install, simply slide on to the extrusion from the side. Should work well for Ender 3, Ender 3 Pro, and Ender 3 V2. See this similar design for a photo of how it looks when installed, with the tools in place: https://www.thingiverse.com/thing:4596763 Remix of Mechaneg's great tool holder, which is designed for small glue sticks instead of Magigoo.
Topics: thingiverse, Ender, stl, 3D Printer Accessories, Ender_3, ender_3_v2, creality_ender_3, Ender_3_Pro
2
2.0
Mar 22, 2021
03/21
by
El Boletaire Underave (elboletaire)
data
eye 2
favorite 0
comment 0
The clip used by many accessories, but slightly modified, so it properly fits without breaking the piece, and using any material, like PLA, ABS, ASA, FLEX... The original clip has a bigger pin in the middle which makes it very difficult to fit it, at least in the ender 3 pro. I had to break such pin every time I printed this part, so I decided to modify it to my needs.
Topics: creality_ender_3_pro, stl, Ender_3_Pro, ender_3_upgrade, 3D Printer Accessories,...
2
2.0
Jan 4, 2021
01/21
by
Von Plaf (freetech)
data
eye 2
favorite 0
comment 0
A ring that have a T slot mount so if you need to use a bungee cord from like an ID card to keep wires pulled out of the way of the Z axis Or use it in any other way you might like....... I made this for an Creality Ender 3 V2, But it should fit on any printer that used the aluminum extrusion with the T slot.
Topics: creality_ender_3_v2, stl, creality_ender_3, 3D Printer Parts, Ender_3, thingiverse, ender_3_v2,...
3
3.0
Mar 5, 2021
03/21
by
Alex Anders (10w73)
data
eye 3
favorite 0
comment 0
I took the ideas of two other guides I liked. I combined them, then reinforced the thing, since it was wobbly and meant to break sooner or later at the screw holes. Now I think this is a guide one can work with. Enjoy! Oh, and I added a piece of foam from leftover packaging to the top of the guide where the filament actually is guided to prevent friction and abrasion.
Topics: stl, ender_3_filament, creality_ender_3, ender_3_upgrade, 3D Printer Parts, Ender_3_Filament_Guie,...
0
0.0
Apr 19, 2022
04/22
by
KUNG PTTTG (kungrc)
data
eye 0
favorite 0
comment 0
more at https://www.facebook.com/kmkkung
Topics: thingiverse, Ender_3_Pro, creality_ender_3, stl, DIY, Ender_3
1
1.0
Nov 8, 2021
11/21
by
Marius Kav (MartasSan)
data
eye 1
favorite 0
comment 0
This is an endcap designed to house a 3A USB outlet
Topics: ender_3_upgrade, stl, 3D Printer Accessories, ender_3_v2, Ender_3, thingiverse, Ender_3_Pro
2
2.0
Jun 6, 2021
06/21
by
(doomfest)
data
eye 2
favorite 0
comment 0
An adapter for this tool holder for the ender 3 pro's narrower PSU: https://www.thingiverse.com/thing:3026123 Initially I saw this adapter: https://www.thingiverse.com/thing:3524883, but I wanted one that followed the lines of the PSU fan better and didn't poke into the build volume as much. Should snap in snugly without glue, but I used a couple drops of CA glue just in case.
Topics: creality_ender_3, ender_3_accessories, tool_holder, thingiverse, stl, 3D Printer Accessories,...
3
3.0
Mar 22, 2021
03/21
by
James Dean (The-Doc)
data
eye 3
favorite 0
comment 0
I've adapted this very nice design to suit my Ender 3 Pro/Duet 2 WiFi case here: https://www.thingiverse.com/thing:3642424 I've narrowed the case and drawers to allow for an air gap between the case and the Duet 2 WIFi case for exhaust purposes. I also shortened the case and drawers slightly (about 5mm) so they seamlessly integrate with the Duet case. The drawers should print as-is on an Ender 3 from the "Both Drawers.stl", while the case should be printed vertically, with its rear on...
Topics: stl, 3D Printing, Ender 3 drawer, Ender 3, Ender 3 Pro Drawers, Duet Wifi, Ender 3 storage, Ender 3...
3
3.0
Jan 16, 2021
01/21
by
Collin Kaufman (ckflyer-13)
data
eye 3
favorite 0
comment 0
I didn't see any filament guides on here that worked for what I needed with the filament still on top of the printer. I printed a version 1, this is the second version. It should be better but if there are any problems with it, let me know. I have an Ender 3 V2, but this should work with any ender 3.
Topics: 3D Printer Parts, ender_3_v2, filament, ender_3_upgrade, Ender_3, Ender_3_Pro, thingiverse,...
2
2.0
Mar 16, 2021
03/21
by
Tomás Dias Jesus (TomasJesus)
data
eye 2
favorite 0
comment 0
Couldn't find anything that i liked for holding my glass bed so designed one
Topics: thingiverse, ender_3_accessories, Ender_3, creality_ender_3, stl, Ender_3_Pro, 3D Printer...
3
3.0
Mar 5, 2021
03/21
by
Rizki Hidayat (rizkyblackhat)
data
eye 3
favorite 0
comment 0
*Note : - You must open the bottom endcap and push a little bit right side and left side. If all side has fit to the steel - Slowly push it with hammer :v
Topics: stl, Ender_3_Feet, 3D Printer Parts, Ender_3_Pro, Ender_3, ender_3_accessories, thingiverse
4
4.0
Mar 3, 2021
03/21
by
Mark Erbe (TrooperDrone)
data
eye 4
favorite 0
comment 0
Remixed from two other files i found, needed a mount for this specific mount. Thanks to the previous posters! https://www.thingiverse.com/thing:2586556 https://www.thingiverse.com/thing:2973859 Link for the light: https://www.walmart.com/ip/GE-10in-LED-Plug-In-Basic-Under-Cabinet-Light-Fixture-26534/49557474
Topics: ender_3_upgrade, 3D Printer Accessories, thingiverse, Ender_3_Pro, ender_3_accessories, stl, Ender_3
1
1.0
Apr 19, 2022
04/22
by
ike mor (The46thdegree)
data
eye 1
favorite 0
comment 0
https://youtu.be/fjyvR_md1fM assembly video Was asked to make rollers and a scrapper for the ender bender (45 degree belt printer upgrade for ender 3 series) prints 2X Posts 2X Roller 1 bar 1 bar mirrored 1 blade 1 left arm with supports touching bed 1 right arm with supports touching bed Hardware: 2x m5x8mm bolt with m5 tnut 4x m5x25mm bolt with nuts 4x 608 bearings Originally designed for an ender 3/pro as well as the ENDER BENDER Look for the group on Facebook...
Topics: 3D Printer Parts, thingiverse, ender_3_v2, Ender_3_Pro, stl, ender_3_upgrade, Ender_3
5
5.0
Jan 21, 2021
01/21
by
Robert Colbert (rcolbert)
data
eye 5
favorite 0
comment 0
Installing a stepper dampener on the Y axis of an Ender-3 causes the bed carriage to hit the motor. This can be resolved by moving the endstop 5.25mm in from the stock location. I took the idea for this part from RobJohnC and went back to the open source CAD drawing and updated it for the 5.25mm offset and a 1.2mm fill on the two squares to match the injection molded part that shipped with my Ender 3. I also added some chamfers to the endstop mounting holes to make installation a little easier....
Topics: 3D Printer Parts, Creality, Ender-3, Creality_Ender_3, thingiverse, Creality_Ender-3, Ender_3, stl
6
6.0
Jun 11, 2021
06/21
by
(benebrady)
data
eye 6
favorite 0
comment 0
Summary Here's yet another Raspberry Pi case that will fit into the extrusion beside the LCD display on the Ender 3 and Ender 3 Pro. As far as I know, this model has not appeared on Thingiverse as I found it while digging into the latest version of DesignSpark Mechanical. The only problem with it was it didn't have the v-slot mounting so I added it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 or better Infill: 15% Filament: Maker Geeks PLA Sweet...
Topics: thingiverse, Ender_3_Pro, Ender_3, stl
3
3.0
Jan 4, 2021
01/21
by
(Harnish_Unlimited)
data
eye 3
favorite 0
comment 0
This is a belt tensioner for the Ender 3-V2, made to match the style of the original factory knob. To install, you will need a metric M4 nut for each tensioner. The nuts will need to fit these dimensions: x_diameter - 6.8 mm y_diameter - 6.8 mm z_height - 3mm
Topics: creality_ender_3_v2, stl, ender_3, Creality_ender_3_mods, 3D Printer Parts, creality_ender_3_pro,...
3
3.0
Jan 7, 2021
01/21
by
Von Plaf (freetech)
data
eye 3
favorite 0
comment 0
Creality Ender 3 Z endstop mount Created in Fusion 360 with measurements from the Z endstop mount on my Ender 3 V2 and wanted to have a spare "just in case"
Topics: Ender3v2, stl, creality_ender_3, zendstop, ender_3_upgrade, 3D Printer Parts, Ender_3, z_endstop,...
5
5.0
Jun 12, 2021
06/21
by
(benebrady)
data
eye 5
favorite 0
comment 0
Summary I remixed this Ender 3 filament guide simply because it's easier to print and there's really not a need to have the hassle of making the 2 pieces fit together...
Topics: thingiverse, creality_ender_3, Ender_3, stl
2
2.0
Mar 26, 2021
03/21
by
Pavel Jurica (Potkan88)
data
eye 2
favorite 0
comment 0
Ender3 ControlBox for display 12864 with spheric cut for SD card.
Topics: stl, creality_ender_3, thingiverse, Ender_3, Ender 3 display, 3D Printing
2
2.0
Apr 4, 2021
04/21
by
ANTHONY GWILLIAM (passion4paint)
data
eye 2
favorite 0
comment 0
SIMPLE BEARING SPOOL SNAP ON ADAPTORS TO HELP FILAMENT ROLL EASIER ON THE SPOOL WITHOUT A TEN HOUR PRINT USE V SLOT BEARING ROLLERS FOR THIS DESIGN
Topics: thingiverse, Ender_3, creality_ender_3, stl, 3D Printing, Ender_3_Pro
1
1.0
Nov 30, 2021
11/21
by
Chip Bark (Chipbark)
data
eye 1
favorite 0
comment 0
This is a remix of a great little part, but the model was appearantly designed for a direct drive conversion. I just went and added a mounting face for the factory extruder. So far everything works great and the part, while thin in the extruder area, is strong enough without being abused. One major flaw that was corrected in the attached files is that the hole for the eccentric bushing on the axis was incorrectly sized in the original files. It is correct here. The original author states using...
Topics: 3D Printing, thingiverse, Ender_3_Pro, Ender_3, stl, creality_ender_3
7
7.0
Jun 20, 2021
06/21
by
Ilya Tsaryuk (ilya_tsaryuk)
data
eye 7
favorite 0
comment 0
Simple cover to protect cables from being cut by sharp edges of extrusion. Cutaway in my extrusion is 40x20mm. Please check your dimensions before printing. You can remove the control box for easier access. Print two copies and snap them into extrusion, could be a little hard, just push them harder and they'll sit there forever :D
Topics: creality_ender_3, ender_3, ender-3, thingiverse, stl, 3D Printer Parts
2
2.0
Jan 8, 2021
01/21
by
Chad Sulski (CSRC)
data
eye 2
favorite 0
comment 0
I wanted a plain death star control knob for my machine that didnt involve supports in the print .. the issue with most death star models on here is the trench around the equater of the star is a 90* shelf.. I went in and changed that to a radius so the layers had something to build on .. the knob is a push on fit and is oriented on the build plate as shown in the drawing.
Topics: 3D Printing, stl, creality_ender_3, Ender_3, thingiverse, Ender_3_Pro
3
3.0
Jul 22, 2021
07/21
by
(smallgod)
data
eye 3
favorite 0
comment 0
Drawer inserts for Ender 3 v2 stock drawer organization.
Topics: Ender_3_drawer, 3D Printer Accessories, stl, ender_3_v2, drawer_insert, Ender_3, thingiverse,...
5
5.0
Apr 16, 2021
04/21
by
Caio Arruda (kalearrugula)
data
eye 5
favorite 0
comment 0
Remix of a cable holder for the Ender 3 Pro. Longer and holds cable at an angle.
Topics: creality_ender_3_pro, 3D Printer Parts, thingiverse, stl, Ender_3, Creality, Ender_3_Pro,...
2
2.0
Jan 19, 2022
01/22
by
Pascal Wyss (NSASchweiz)
data
eye 2
favorite 0
comment 0
Original Summary from https://www.thingiverse.com/thing:3031488 As the name implies I don't Really know if this is necessary. You should check that your print head can move all the way up before printing as there cane be small variations in the distance between the Z axis and the aluminum frame. V2 - Changed the Distance between the Z axis and the aluminum frame made the hole bigger to compensate for low print accuracy ########################################################## Remix Summary I...
Topics: creality_ender_3, thingiverse, ender_3_v2, Ender_3, creality_ender_3_v2, stl, 3D Printer Parts,...
0
0.0
Apr 19, 2022
04/22
by
Dustin Budry (Dbudry77)
data
eye 0
favorite 0
comment 0
Looking at minimalistic handles most wouldn't fit my Ender 3 pro, or Ender 3 V2. and once they did, they just weren't long enough. I did some simple changes to the file adding to the y axis, taking away from the Z.
Topics: thingiverse, 3D Printer Accessories, ender_3_v2, Ender_3_Pro, creality_ender_3, stl, Ender_3
2
2.0
Mar 26, 2021
03/21
by
Florian Zeller (3x3meter)
data
eye 2
favorite 0
comment 0
Gehäuse fürs Display. Staubschutz für Ender 3
Topics: stl, ender 3, ender 3 display, thingiverse, ender 3 case, 3D Printer Accessories, ender 3 display...
6
6.0
Jan 21, 2021
01/21
by
young seok Youn (ccombrad)
data
eye 6
favorite 0
comment 0
This is a Ender-3 board fan guard. I have designed in fusion 360. I usually pursue a simple design. You need a little printing time. There is no support and Raft. But The objects contained 2 parts so you need a bond. If you turn on the heating bed, you should wait to cool the heating bed after finished print. The objects are thin so you need a cooling time.
Topics: ender_3_fan, 3D Printer Accessories, ender_3_fan_guard, thingiverse, creality_ender_3, Ender_3, stl
3
3.0
Jan 16, 2021
01/21
by
Alessandro bo (pipino80)
data
eye 3
favorite 0
comment 0
mia versione del pomello display per ender 3 v2
Topics: 3D Printer Parts, ender 3 pro, display knob ender 3, ender 3, thingiverse, creality_ender_3, stl
2
2.0
Apr 4, 2021
04/21
by
Corman 1944 (CORMAN1944)
data
eye 2
favorite 0
comment 0
V6- Here Is little modification to BeauSquire's original v1 design. I made it thicker to .44in (Which I believe his original file has also been increased in size as of now) I did this to allow for more airflow to the heat sink. Along with that change I opened up the 2 air channels on either side that were previously faux vents and then I embedded a Torus (doughnut) into the interior to maximize the interior space for airflow and circulation 5/1/2020 (update) *V8- I modified my original remix to...
Topics: thingiverse, CR-10, Ender 3 mod, 3D Printer Accessories, Ender_3_Pro, stl, Ender 3 Shroud, Ender 3...
2
2.0
May 20, 2021
05/21
by
Hairyfaced Hooman (hairyfacedhooman)
data
eye 2
favorite 0
comment 0
Immediately after printing Baggi0's Ender 3 tool holder (No Extra Screws needed), the hook for the snips broke off - so this is a quick and dirty fix to re-add a hook to the tool holder. The hook was taken from the original model, with the attachment modified by myself. Youll need to sand down the peg a little to get it to fit snugly into the hole.
Topics: thingiverse, Ender_3_Pro_Upgrades, ender_3_upgrade, Ender_3, Ender_3_Pro, 3D Printer Accessories,...
1
1.0
Jan 18, 2022
01/22
by
Rohin P (rohinp)
data
eye 1
favorite 0
comment 0
A much smaller extruder knob, it measures 1.5cm in diameter There are big tolerances, so scale to around 97% if the original scale is too loose. Made in OnShape, go and edit it: https://cad.onshape.com/documents/3561e67cd3f654dcdf85aa90/w/b653cc9efaeae0a9c1eacdf1/e/043be62024495919a36fe421?renderMode=0&uiState=61c6354822c6a26d02971893
Topics: Ender_3_Pro, creality_ender_3, thingiverse, ender_3_v2, Ender_3, stl, 3D Printer Parts, Ender3
