0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Benny Modig (tarzzz)
data
eye 0
favorite 0
comment 0
Fanshroud for Noctua 4020 fan on Ender 5 Plus. Should fit several other printers too. Print as picture from Cura, circles down to plate, with supports !
Topics: 3D Printer Parts, ender 5 plus, thingiverse, fanshroud, noctua, ender, fan, 4020, ender 5, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Robert Jeb (XoBoR)
data
eye 0
favorite 0
comment 0
This is an Adapter that allows the installation of a BTT Octopus and the Stock MOSFET that comes with the Printer into the case of the Ender 5 Plus.
Topics: 3D Printer Parts, thingiverse, ender_5_plus, BTT_Octopus, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Robert Shepherdson (robjshepUK)
data
eye 1
favorite 0
comment 0
Small bracket with screw to clip onto an ender 5+ frame so that you can mount a USB camera on it where the base has a hole for a tripod / other mount. Thread dimension included in picture and fits perfectly on my camera mount.
Topics: ender 5 plus, thingiverse, camera_mount, 3D Printer Accessories, stl
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Christopher Shoun (Rustyfarry)
data
eye 0
favorite 0
comment 0
This is my First Thingiverse upload. I ended up getting the Micro Swiss Dual Gear Extruder and saw that I needed to print a part in order for the filament to line up from the run out sensor on the Ender 5 plus. I couldn't find one so I had to make one. This is a very simple design (Still Learning Fusion 360). I have two versions where you can fit a PC4-M6 or PC4-M10 Pneumatic Fitting. The hole is fairly small so it will be a tight fit. I didn't need to but depending on how precise you printer...
Topics: 3D Printer Parts, thingiverse, Micro_Swiss, dual_gear_extruder, ender_5_plus, run_out_sensor,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Derek Burket (sick4noise)
data
eye 0
favorite 0
comment 0
I made this remix specifically for [this front crossbar relocator](https://www.thingiverse.com/thing:4735960) that moves it just in front of the vertical bars. Requires the same hardware as the original: (2) M4x8 + t-nuts to 2020 extrusion
Topics: ender_5_upgrades, thingiverse, ender_5_pro, Creality_Ender_5, crossbar, ender_5_plus,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Clive Slade (Lazy-Ferret)
data
eye 0
favorite 0
comment 0
I am new to 3d printing, and for my first foray, I went with a Creality Ender 5 plus, which so far I have been very impressed with, especially as it actually worked out of the box. The one thing that I was not impressed with, was the lack of cable supports. One of my first tasks was to find and print the support for the bed wires, but after that, I was struggling to find any supports for the cables that pass to the head, and these were flopping down nearly touching the bed. I borrowed ideas...
Topics: 3D Printer Parts, thingiverse, cable_management, Creality_Ender_5_Plus, MicroSwissDirectDrive,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
John Griesbach (handyman20000)
data
eye 1
favorite 0
comment 0
This is a right hand mirrored version of the original. I added V2 file of STL with slightly larger USB CAP storage cutout.
Topics: ender 5 plus, thingiverse, ender 5 upgrades, tool holder, Creality Ender 5, ender 5 pro, Tools,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Johann Byrd (Gnome0)
data
eye 1
favorite 0
comment 0
Basic redesign of suavewarrior's belt mod. This will completely eliminate any z-wobble problems. The bed will slowly fall after power off, but that didn't bother me that much because the printer will home the z axis before every print anyway. I might make a redesign in the future to use a worm gear when I can find a good source for one. This mod will require you to raise the bed with ether this mod https://www.thingiverse.com/thing:3890803 or my own version. With mine you only lose about 5-10mm...
Topics: thingiverse, ender_5_plus, 3D Printing, ender_5, stl, z_axis
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Pablo (Filloa)
data
eye 0
favorite 0
comment 0
Carro Ender 5 Plus para extrusión directa con Bondtech BMG y Hotend Phaetus Dragonfly BMO
Topics: 3D Printer Parts, thingiverse, Creality_Ender_5_Plus, phaetus_dragonfly_BMO, Bondtech_BMG_extruder,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
matt perdue (fire4200)
data
eye 1
favorite 0
comment 0
dimmer holder for LLW-NW-B-2-D https://www.amazon.com/gp/product/B07MNRCR48/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1&tag=thingiverse09-20 there is 2 holes inside for mounting m4 size and the top is bolted on with m4x0.7 you will need to chase threads with a tap i attached my with 2 m3x0.5 *10mm and two m3 t-nuts to the front of my ender 5 plus
Topics: Ender, LLW-NW-B-2-D, thingiverse, dimmer mount, dimmer, ender_5_plus, Ender 5 Light Mount, light,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mark Kotsamanes (MKotsamanes)
data
eye 1
favorite 0
comment 0
Corner bracket for adding magnetic side panels to an Ender 5 Plus (2020 aluminum extrusion). Snaps tightly into extrusion no fasteners required. Not removable without damaging the print. pocket designed for 10mm x 60mm magnet. File included without pocket, remix as required. Printed with 45 degree flat side on printer bed for 0 support printing and equal strength to both sides.
Topics: ender_5_upgrades, thingiverse, 2020_extrusion, ender_5_plus, 3D Printing, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Theo van de Velde (Theo2020)
data
eye 0
favorite 0
comment 0
Simpel improved fan duct, exchange with standard one. Print without supports in vertical position
Topics: 3D Printer Parts, thingiverse, ender_5_plus, stl, fan_duct
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Billy Tail (ProtomakerSprint)
data
eye 1
favorite 0
comment 0
Heat Bed Power Module Expansion Hot Bed MOSFET Tube High Power for 3D Printer For replacement of the Creality Ender 5 Plus Module With unique snowflake heatsink design, increased heat dissipation area which has a great cooling effect, solve the problem of excessive power and current load due to hot bed. 25A can stabilize long-term work, it can well protect the connectors on the controller board from burning. In the process of use, the current should not exceed 25A. 12v can use 360W, 24v can use...
Topics: thingiverse, Creality Ender 5 Plus, 3D Printer Accessories, Creality Heat Bed FET, stl
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jason Barrett (canibugu)
data
eye 0
favorite 0
comment 0
This 9mm shim is used to realign the run out on an Ender 5 Plus with a dual drive extruder.
Topics: 3D Printer Parts, ender 5 plus run out, thingiverse, ender 5 run out shim, ender_5_plus, ender_5,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Serin Fel (SerinFel)
data
eye 0
favorite 0
comment 0
For some reason known only to the 3D Printer Gods the HeroMe 5 Gantry Adapter, either from the official package or from 11Pump, does not fit my Ender 5 Plus gantry, where the version from 11Pump fit my base Ender 5 just fine. Maybe there's one specifically for the E5+ gantry and I missed it, I don't know. I remixed 11Pump's version. v1.4: moved the Gantry Clip holes to the Left by about 1.5mm, made a recess for the bolt head for the top right pom wheel on the first version. v1.41: additionally,...
Topics: 3D Printer Parts, thingiverse, HMG5, E5+, Ender 5 Plus, herome5, Herome_gen5, gantry adapter,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
s. (seysenthemason)
data
eye 1
favorite 0
comment 0
This is a stand I created in CAD to display our furry friend's paw and nose print plates we had made recently.
Topics: pawprint, thingiverse, stand, 3dprinting, 3D Printing, display, memory, Creality_Ender_5_Plus,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Andrew Hallam (hallamnet)
data
eye 0
favorite 0
comment 0
This is a board mount for the large ender 5 Plus case for the BTT SKR 1.4 or SKR 2.0 mainboard + the BTT UPS board. Slot fit over existing mount holes and use existing screws.
Topics: 3D Printer Parts, thingiverse, hallamnet, skr_14_turbo, BTT, bigtreetech_skr_2, UPS,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Boštjan (3Detajl)
data
eye 1
favorite 0
comment 0
This is my final version of NEW_Strain_Relief_Mix with Filament sensor.
Topics: Ender, direct-drive, e3dhemera, E3D_Hemera_Mount, Filament_Sensor, stl, ender_5_pro, ender_5,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Bruce Lowry (BD0G)
data
eye 0
favorite 0
comment 0
I needed taller light bar clips to allow the LED light strip to be mounted higher on the front cross bar extrusion after I installed the DropDown front bar modification for my Ender 5 Plus. Decided to share 2 versions. One is 100 mm taller and the other is 120 mm taller than the original source clips. If you find this useful consider buying me a coffee at http://buymeacoffee/bdog
Topics: Light Bar, thingiverse, 3D Printer Accessories, Ender 5 Plus, Ender 5 Plus Light, Lightbar clips,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Chris Gonnerman (Northcrosse)
data
eye 0
favorite 0
comment 0
I wanted an LED strip light for my Ender 5 Plus, but all I found was this one for the standard Ender 5: https://www.thingiverse.com/thing:4125317 Front and rear lighting is nice, but it wasn't wide enough for the Plus so I needed something bigger. This is what I ended up with. At present it's just a front bar, with the length adjusted so that you can print it rotated 45 degrees in one piece. It's not really a remix as such, as I carved out almost all of dbltrbl023's design and built it fresh....
Topics: thingiverse, ender_5_plus, 3D Printer Accessories, stl, led, LED_Light_Bar
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Kirill Kuznetsov (dr_agon)
data
eye 0
favorite 0
comment 0
A simple cover for Ender 5 Plus PSU which uses 120mm fan.
Topics: Meanwell_RSP_500_24, 3D Printer Parts, thingiverse, ender_5_plus, PSU_Cover, PSU, ender5plus,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Kirill Kuznetsov (dr_agon)
data
eye 0
favorite 0
comment 0
# X joints of Zero G Mercury One beta 1 for MGN12C rails carriages Original mounts require you to use MGN12H carriages(which are bit better) but if you have MGN12C-s you can print these joint parts. Original STLs of ZeroG Mercury One beta 1 can be found here: https://drive.google.com/drive/folders/1PAZikqIuhMe9ZNL2i_e0beK_RDhL8ELj
Topics: 3D Printer Parts, thingiverse, Core_XY, ender_5_plus, corexy, ender_5, ender5plus, ender5_plus,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jasen Stengel (mightygrom)
data
eye 1
favorite 0
comment 0
I pulled together a couple different external case mods for the ender 5 plus and modified them for different hardware.. much more efficient than redesigning the wheel. big thanks to Marty_Z, YuTRON, and alpokemon who did the heavy lifting for this project. https://www.thingiverse.com/thing:4790166 I've upgraded my ender 5 plus to use a BTT SKR2, BTT TFT 5.0 v3, Mean Well Se450_24 PSU, and a TH3D Mosfet, so all kinds of holes had to be moved. I redesigned the PSU case based on the concepts of...
Topics: thingiverse, BTT_SKR_v2, ender_5_plus, PSU_Cover, 3D Printer Accessories, Mean_Well_SE-450-24,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Clive Slade (Lazy-Ferret)
data
eye 0
favorite 0
comment 0
I am new to 3d printing, and for my first foray, I went with a Creality Ender 5 plus, which so far I have been very impressed with, especially as it actually worked out of the box. The one thing that I was not impressed with, was the lack of cable supports. One of my first tasks was to find and print the support for the bed wires, but after that, I was struggling to find any supports for the cables that pass to the head, and these were flopping down nearly touching the bed. I borrowed ideas...
Topics: 3D Printer Parts, thingiverse, cable_management, microswiss_dd, Creality_Ender_5_Plus,...
0
0.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Reginald Spear (Bigwumpus)
data
eye 0
favorite 0
comment 0
This thing is a collection of mounting brackets for the Big Tree Tech filament sensor and the Ender 5 Plus filament sensor plate. There is one back plate mounting adapter for the BTT Filament sensor and two options for handling the Bowden tube with direct extruders. One of the Bowden tube adapters has a pressure fitting to attach the Bowden lead in tube. Theo other adapter has a through hole to pass the Boden tube through. This adapter relieves strain on the BTT pressure fitting and provides...
Topics: thingiverse, bigtreetech, 3D Printer Accessories, Creality_Ender_5_Plus, Filament_Sensor, stl
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Tom Brunton (CockeyedTurkey)
data
eye 1
favorite 0
comment 0
Printed in Red Sunlu ABS with nozzle temp 255C and bed temp 100C with a brim.
Topics: BL_Touch, thingiverse, E3D_Hotend, mount, Creality_Ender_5_Plus, E3D_v6, stl, part_cooling_fan,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Alex Falkowski (Unhuman21071990)
data
eye 1
favorite 0
comment 0
Abstandshalter für den Filamentsensor am Ender 5 Plus, bedingt durch Extruderumbau auf Dualgear mit Filament Cleaner.
Topics: dualgear_extruder, Abstandshalter, filament_cleaner, thingiverse, Filament_Sensor, Ender_ 5_Plus,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Justin Hallett (TheSin)
data
eye 1
favorite 0
comment 0
Modified based on https://www.thingiverse.com/thing:4795205 for the Ender-5 Plus * Changes some of the screw points * Moved one of them to allow for a Ground Wire * Added clamp system for the Ender-5 Plus control box All credit goes to the original marker, I only made tweaks. Fusion360 and step files included
Topics: TS35, mks_TS35, thingiverse, Creality_Ender_5_Plus, stl, 3D Printer Parts, ender5plus, ender5_plus
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Elliott Mills (PrintMills)
data
eye 1
favorite 0
comment 0
Not sure where the original design came from but I have it on my ender 5. Bought a 5 plus and wanted to add similar protection to the BL touch. Quickly discovered that I needed to add a few mm to it in order to maintain the clearance of the rail wheel. you'll need a rail T and a 3mm screw that's around 3-4mm long... Rebuilt from scratch in tinker CAD. If you find the original design link it to me in the comments so i can give credit to the original
Topics: stl, thingiverse, ender_5_plus, 3D Printer Parts
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Benu Gaensli (mc_gaensli)
data
eye 1
favorite 0
comment 0
Use a 80 x 80mm fan
Topics: ventilator, optimized, cooling_fan, Ender, thingiverse, cool, Creality_Ender_5, heatbed,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Justin Hallett (TheSin)
data
eye 1
favorite 0
comment 0
This is a redesign from https://www.thingiverse.com/thing:4140386 to the Ender-5 Plus, added an option for a larger relay board, A larger Buck Converter and Added a spot for the MKS UPS. To install follow the pictures above I found it easier to mount to the UPS when it was out, and it makes a very nice pass through for cables under the tray. See original post for links to boards used. Extra boards I used are as follows * Larger Relay SLA-05VDC-SL-A...
Topics: mks_ups_mount, ky-019, thingiverse, lm2596, rpi, SLA-05VDC-SL-A, relay, octopi, stl, ender_5_plus,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Justin Hallett (TheSin)
data
eye 1
favorite 0
comment 0
This is a redesign from https://www.thingiverse.com/thing:4140386 to the Ender 5 Plus, added an option for a larger relay board, A larger Buck Converter and Added a spot for the MKS UPS. To install follow the pictures above I found it easier to mount to the UPS when it was out, and it makes a very nice pass through for cables under the tray. See original post for links to boards used. Extra boards I used are as follows * Larger Relay SLA-05VDC-SL-A...
Topics: mks_ups_mount, ky-019, thingiverse, lm2596, rpi, SLA-05VDC-SL-A, relay, octopi, stl, ender_5_plus,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Benu Gaensli (mc_gaensli)
data
eye 1
favorite 0
comment 0
lasered downside sheet for more silent and more intensive cooling ender 5 plus
Topics: Creality, cooling_fan, Ender, thingiverse, cooling, housing, cool, cooler, aluminum, Aluminium,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Benu Gaensli (mc_gaensli)
data
eye 1
favorite 0
comment 0
casings to mount on a ender 5 plus for switches example: ventilator to cool heatbed after print or LED strip
Topics: switch, Creality, Ender, LEDs, thingiverse, upgrade, LED, LED_light, led_strip, Creality_Ender_5,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Benu Gaensli (mc_gaensli)
data
eye 1
favorite 0
comment 0
Optimised flow for more cool air for the extruder
Topics: hotend_cooling, ventilator, bowden_extruder, cooling_fan, Ender, thingiverse, cool,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Pete Franklin (Madgutts)
data
eye 1
favorite 0
comment 0
Since uploading my Ender 5 Plus Micro Swiss cable support bracket, I have redesigned a bracket to fit at the end of the X Gantry to mount the cable on to support it away from the metal frame and the wheels on the gantry. You will need to install this with 2x M5 blots and T Nuts. Once it has been bolted on to clear the wheels and frame work, then slide the X carriage to the extreme left, and the Y carriage to the extreme front. Hold the cable trunking against the bracket to make sure there is...
Topics: thingiverse, ender_5_plus_upgrades, ender 5, Creality_Ender_5_Plus, stl, 3D Printer Accessories
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Benu Gaensli (mc_gaensli)
data
eye 1
favorite 0
comment 0
Camera Holder for Ender 5 Plus I used a D-Link Network Camera DCS‑6500LH It can be rotated arround and up and down from external with an app. Yo do not have to be at home. You need 4x M5 Screw with nuts and 1x M6 to mount the camera itself on the holder.
Topics: holder, Ender, thingiverse, Camera, webcam, Creality_Ender_5, webcamera, camera_mount, stl,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Arthur Greenarrow (Ofthegreenarrow)
data
eye 1
favorite 0
comment 0
I had been using Satsana Ender 3 Fan Duct - BLtouch for my Ender 5 Plus as they share the same stock back plate. As most the Ender series printers do. Upgraded to the Microswiss Direct Drive and all metal hot end. and needed the part cooling ducts just a bit lower so I moved them down the 2mm that was needed for the new hot end.
Topics: MicroSwiss, thingiverse, cooling, direct_drive, fan_duct, stl, ender_5_plus, 3D Printer Accessories
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
timo meussen (teemobe)
data
eye 1
favorite 0
comment 0
Just run the gcode from sd or octoprint Use feeler gauge or paper while adjusting knobs
Topics: 3D Printing Tests, bed leveling, thingiverse, gcode, stl, ender_5_plus
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Christopher Roma (RomaAquatics)
data
eye 1
favorite 0
comment 0
Installation video: https://youtu.be/-grEMgIN7UY Buy me a Coffee: https://paypal.me/RomaAquatics Stealthburner modified to work with the Microswiss Direct Drive and All Metal Hotend and BL-Touch. Printing Info The parts are positioned in the correct orientation for printing. Make it as light as possible while still keeping it strong enough. May variables involved in that so I'll leave the filament and slicer settings up to you. NO SUPPORTS!
Topics: steathburner, swiss burner, ender 5 pro, direct drive, thingiverse, ender 5 plus, voron,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Matthew Gray (mrdoriangray)
data
eye 1
favorite 0
comment 0
I did a remix of the Ender 5 plus hemera mount https://www.thingiverse.com/thing:4026886. but found that the nozzle was sitting higher then the wheel on the rail making it impossible to level. so I lowered the mount holes by 3mm and that gave me plenty of clearance. i also removed the IR probe mount as I didn't need it
Topics: thingiverse, e3d_hemera, E3D_Hemera_Mount, Hemera_mount, hemera, Creality_Ender_5_Plus, stl,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Tyler Schwab (icondrz)
data
eye 1
favorite 0
comment 0
Upgraded my extruder to a dual gear extruder and the existing runout sensor no long lined up with the extruder. instead of just making a spacer i decided to redesign the whole thing as the existing one sucked to get the filament through idea of the design is to push a chunk of capricorn through where the filament feeds through and cut a notch out of it with a razor blade designed to work with existing micro switch and screws printed with pla with no supports
Topics: Ender_3_Pro, Creality, thingiverse, stl, ender_5_plus, 3D Printer Parts
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Tyler Schwab (icondrz)
data
eye 1
favorite 0
comment 0
Upgraded my extruder to a dual gear extruder and the existing runout sensor no long lined up with the extruder. instead of just making a spacer i decided to redesign the whole thing as the existing one sucked to get the filament through idea of the design is to push a chunk of capricorn through where the filament feeds through and cut a notch out of it with a razor blade designed to work with existing micro switch and screws printed with pla with no supports
Topics: thingiverse, ender 5 plus, creality, Creality_Ender_5, ender 5, stl, 3D Printer Parts
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
(jq910)
data
eye 1
favorite 0
comment 0
The mini Satsana remixed to fit Ender-5 printers. The blower fan was moved forwards about 10mm in order to accommodate the belt. There is also a version with a mount for a small endoscope as a nozzle camera which does need support only on the endoscope mount (refer to images). The normal version should be compatible with the original BL-touch bracket but I have never tested it. .f3d and .scad files are also available if you need it edit them.
Topics: Satsana, ender_5_pro, satsana_remix, thingiverse, Creality_Ender_5, cooling fan, 3D Printer Parts,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Patrick Köhler (pakkko)
data
eye 1
favorite 0
comment 0
E5Plus Cable support Kabelführung Hotend Ender 5 Plus Klemco MicroSwiss original Hotend English A friend of mine, Johannes Loibl , designed this great cable holder. And it's too good not to share with you. Johannes allowed me to share this holder with you and upload it to Thingiverse. Thanks for that! He designed a holder for the original hotend on the Ender 5 Plus , one for the mounted Microswiss Direct Drive conversion and one for a Klemco Mount or E3D V6 Multimount . I use the Multimount...
Topics: thingiverse, pakkko, 3D Printer Parts, loibl, Creality_Ender_5_Plus, original, e3dv6_mount, stl,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
simon goldsworthy (Si_Gowla)
data
eye 1
favorite 0
comment 0
a simple easy to fit solution to the poor location of usb port tft35 for fitment of ce5 plus. clicks into place assembled for easy fitment.
Topics: tft, ce5plus, thingiverse, TFT35, BIGTREETECH_TFT35, CE5P, bigtreetech_tft35_v3,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Sammie (buildbysammie)
data
eye 1
favorite 0
comment 0
Filament holder This filament holder is designed because I wanted a filament holder where the bearings are put on the rotation axis and where multiple sizes of spools would fit on. It runs really smoothly and keeps the spools rotation axis perfectly in the middle of the bearings. The holder uses a cylinder consisting of two identical parts where two z608 bearings are fitted in to (outer diameter 22 mm, inner diameter 8mm, thickness 7mm. In the cylinder there is place for three spring loaded...
Topics: thingiverse, filament_spool_holder, 608_bearing, ender_5_plus, filament_spool, filament, stl,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
simon goldsworthy (Si_Gowla)
data
eye 1
favorite 0
comment 0
A BTT-TFT35 screen mount with access to usb pot. to use this, you will need to cut a section from you standard electronics box.. modify at your our risk!
Topics: ce5plus, thingiverse, bigtreetech, TFT35, BIGTREETECH_TFT35, CE5P, bigtreetech_tft35_v3,...
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Mikaeru Matin (Mikaeru-Matin)
data
eye 1
favorite 0
comment 0
Stabilisateur de visse Trapézoïdale d'axe Z pour Ender 5 Plus
Topics: Ender 5 Plus, Z axis, stabilizer, thingiverse, trapezoidal, stl, 3D Printer Parts, z-axis_stabilizer
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Adam Annen (Badadz)
data
eye 1
favorite 0
comment 0
Ensure you download from individual files to avoid 404 error currently happening with 'Download All' on thingiverse. I mainly built this for myself to ensure my dual Z screws on both my Ender 3 Pro and Ender 5 Plus are in sync. When testing level if the level is off by left to right, it is likley the screws are out of sync. (I use solid bed mounts so it is usually just this to do occasionally) This will work for any printer where the X Axis is a 2020 extrusion size (I.e. Most Creality and...
Topics: 3D Printing, thingiverse, dual_z, calibration, Ender_3, 2020_extrusion, 2020, stl, dual_z-axis,...
