2
2.0
Mar 19, 2021
03/21
by
Thomas parker (Hazzel)
data
eye 2
favorite 0
comment 0
designed to protect Caddex EOS2 lens. To printed in PETG filament (note clean up may be required) Thank you for downloading.
Topics: R/C Vehicles, beta75__eos2, Betafpv_EOS2, thingiverse, caddx_eos2, stl
2
2.0
Jun 7, 2021
06/21
by
vzzbx vzzbx (vzzbx)
data
eye 2
favorite 0
comment 0
This is a camera adapter mount for the [Caddx Turbo EOS2](https://www.banggood.com/Caddx-Turbo-EOS2-43-1200TVL-2_1mm-160-Degree-13-CMOS-Mini-FPV-Camera-NTSCPAL-For-RC-Drone-p-1309237.html?p=891405769235201409HM) to fit in a full-size 28x28mm camera mount. It should fit other small 13x13mm cameras too. The camera fits in snuggly and is fastened using two M2 screws. Material should not be really critical so PLA is fine. Using a flexible material such as flex PLA or Ninjaflex could help a bit to...
Topics: openscad, Caddx_Turbo_EOS2, scad, camera, caddx_eos2, thingiverse, drone, Vehicles, caddx, stl,...
4
4.0
Mar 4, 2021
03/21
by
Falcon Multirotors (falconmultirotors)
data
eye 4
favorite 0
comment 0
A fresh canopy for your Babyshark with mounting holes for the Caddx EOS2 camera! This canopy has the same antenna hole for a dipole as the original Babyshark canopy, and boasts slightly more room for your stack.
Topics: caddx eos2, falcon multirotors, babyshark, thingiverse, R/C Vehicles, stl, eos2
3
3.0
Mar 5, 2021
03/21
by
H@ckbert Lee (Hackbert)
data
eye 3
favorite 0
comment 0
Bigger Antenna hole. Flat Screw mount.
Topics: caddx_eos2, parkracer, stl, R/C Vehicles, toothpick, fpv, eos2, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Yuan Lin (sys_er26)
data
eye 3
favorite 0
comment 0
It is difficult to install **14mm** width FPV cameras in the **X2-ELF** frame kit due to its narrow space between two front standoffs. Therefore, I designed this camera mount to accommodate the **Caddx Turbo EOS2 FPV camera**, which has a relatively large lens in its class. [Details for the build](https://rotorbuilds.com/build/20093) # Specification 1. Camera Tilt: * 0-45 Degree Adjustable * 45 Degree Fixed * 30 Degree Fixed 2. **Fixed angle** version doesn't need screws, so I also provided...
Topics: stl, R/C Vehicles, fpv_camera_mount, Adjustable, X2-ELF, thingiverse, Caddix_EOS2, camera_mount,...
6
6.0
Jan 19, 2021
01/21
by
Brent Oatman (circleofowls)
data
eye 6
favorite 0
comment 0
This is a simple replacement for the original Leader 120 camera mount meant to fit the Runcam Nano FPV camera. There is very little clearance between the mounting screw and the Runcam Nano circuit board, use caution when installing if you're using screws that may be longer or wider than the stock camera mounting screws provided with the Leader 120. I designed this mount to clamp together around the camera utilizing the tiny screws that fasten the halves of the original camera mount however I...
Topics: Leader 120, Caddix EOS2, Runcam, thingiverse, Runcam nano, caddx_eos2, EOS2, Openscad, R/C...
4
4.0
Mar 5, 2021
03/21
by
Dave Brooks (whirlybloke)
data
eye 4
favorite 0
comment 0
Use these to mount a Caddx Turbo EOS2 FPV Camera to a Shendrone Squirt V2. Print from TPU as 100% infill for best results. https://youtu.be/npNu_gOHMdk
Topics: caddx_eos2, stl, Shendrones_Squirt, Vehicles, thingiverse
3
3.0
Mar 4, 2021
03/21
by
(Thump2010)
data
eye 3
favorite 0
comment 0
I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one. I did design this so that the screws with the big heads that come with the Mobula7 replacement FC and the UR65 fit this canopy. lol it seems like I get better and better with each new canopy I design. WARNING!!! I do use the HappyModel Whoop VTX so I did not have to really worry...
Topics: caddx_eos2, tiny_whoop, stl, R/C Vehicles, canopy, tiny_whoop_canopy, Tinywhoop, CADDX, Mobula_7,...
2
2.0
Mar 25, 2021
03/21
by
Christian Steinmair (alkobua)
data
eye 2
favorite 0
comment 0
- Print everything in TPU! - Exchange the original VTX with a TBS Unify Pro32 Nano - Burn a small hole at the back for the antenna (Has to be a little tight!!) Initially I had the HD version and the Caddx Turtle V2 i EXTREMELY sensitive to crashes! So if you just want to rock around this thing, throw away the turtle and original VTX and put in the Betafpv/Caddx EOS2 and the Unify Pro. You will have ENDLESS FUN!!
Topics: stl, R/C Vehicles, thingiverse, Betafpv 85X, Betafpv EOS2
3
3.0
Mar 5, 2021
03/21
by
Ahmad Albab (irg33k)
data
eye 3
favorite 0
comment 0
Hardware; V1 Motor : HappyModel 0802-19000kv. Prop : KingKong 65mm. FC : Crazybee F3. VTX : HappyModel Whoop VTX 5.8g 40ch 25mW~200mW. RX : TBS Crossfire Nano. Battery : 2 X GNB 300mAh 1s Frame : Toothpick MK2.0 (PETG) V2 Motor : HappyModel 1102-10000kv. Prop : KingKong 65mm. FC : Crazybee F4 Pro V2.0. VTX : HappyModel Whoop VTX 5.8g 40ch 25mW~200mW. RX : TBS Crossfire Nano. Battery : 1 X TBS Graphene 2s. Frame : Toothpick MK2.3 (Carbon Fiber) I'm using M2 x 25 screws for the FC/VTX mounting....
Topics: caddx_eos2, Caddx_Turbo_EOS2, stl, R/C Vehicles, kabab_fpv, caddx_mount, CADDX, kabab, Mobula_7,...
4
4.0
Mar 3, 2021
03/21
by
Yuan Lin (sys_er26)
data
eye 4
favorite 0
comment 0
This camera mount is specifically designed for **Caddx Turbo EOS2 fpv camera** and **VX110 frame kit**. # Features 1. Fits 2.5 inch prop 2. 0-45 degree adjustable camera angle 3. Easy to print (No need for support) 4. Light weight # Known issues 1. Although camera angle is adjustable, it is **NOT** recommended to frequently change camera angle since the cable connection on EOS2 camera is a bit fragile. # My Example build [VX110 Stealth](https://rotorbuilds.com/build/15510)
Topics: fpv_camera_mount, Adjustable_cam_mount, camera_mount, VX110, thingiverse, R/C Vehicles, stl, eos2,...
4
4.0
Mar 4, 2021
03/21
by
(Thump2010)
data
eye 4
favorite 0
comment 0
I revised my EOS2 whoop camera mount to now be able to mount the AKK KX5 VTX inside the canopy with cutouts for the channel button and the display. Print at 0.1mm and with support especially if using TPU and you want the top to turn out ok. A normal version and a thicker version for TPU printing are included
Topics: kx5, AKK KX5, tiny_whoop_canopy, AKK, Turbo_Eos1, canopy, thingiverse, R/C Vehicles, stl, eos2,...
2
2.0
Jun 21, 2021
06/21
by
Red S (Redfpv21)
data
eye 2
favorite 0
comment 0
This is a canopy designed for the Powerpick frame. It is designed to fit the caddx Eos2 or similar sized nano cameras. The canopy mounts the the four M3 screws that hold the arms/frame together. The mounting holes on the canopy are a little smaller than M3 so that there is no need for a M3 nut to hold the canopy on. I have also designed a canopy for Aio camera, Runcam Nano 2, and Eos2. The eos2 has a slightly longer dimension than the runcams. Printed in TPU Infill is 100% Use supports
Topics: Robotics, caddx_eos2, powerpick, thingiverse, stl, fpv, kabab_fpv
2
2.0
Mar 25, 2021
03/21
by
Christian Steinmair (alkobua)
data
eye 2
favorite 0
comment 0
- Print everything in TPU! - Exchange the original VTX with a TBS Unify Pro32 Nano - Burn a small hole at the back for the antenna (Has to be a little tight!!) Initially I had the HD version and the Caddx Turtle V2 i EXTREMELY sensitive to crashes! So if you just want to rock around this thing, throw away the turtle and original VTX and put in the Betafpv/Caddx EOS2 and the Unify Pro. You will have ENDLESS FUN!!
Topics: stl, R/C Vehicles, thingiverse, Betafpv 85X, Betafpv EOS2
2
2.0
Jun 6, 2021
06/21
by
András Bognár (Andris8888)
data
eye 2
favorite 0
comment 0
I made this frame after creating my [1S frame](http://www.thingiverse.com/thing:3289621) and decided to experiment more with a more powerful 1S/2S size. After so many iterations finally it is here. The cam and VTX mount should be printed but the main frame should be made of Carbon Fiber. I contacted Armattan Productions and they produced the frame in excellent quality. You can [but the carbon fiber frame here](https://armattanproductions.com/pages/product_details/21369). Weight without battery...
Topics: micro_quadcopter, mount, frame, fpv, caddx_eos2, carbon, toothpick, thingiverse, drone, caddx, stl,...
2
2.0
Mar 26, 2021
03/21
by
Daniel Zabinski (thepolishcamera)
data
eye 2
favorite 0
comment 0
Bought one of the super awesome Beta 75x whoops for the indoor race season. I LOVE the quad. But I noticed lots of people had one. I wanted to differentiate mine by designing a different canopy. I was inspired by jet fighters. So I created these "ducts" that direct air to the VTX. Does it actually make a difference? Probably not. But it looks cool! If you print one please post a pic! UPDATE! Made a couple of small adjustments to the original file. Changed the rear vent hole to have a...
Topics: stl, thingiverse, beta75x, Hobby, betafpv75x, BetaFPV_75x, betafpv, Betafpv_EOS2
3
3.0
Mar 5, 2021
03/21
by
Kevin Cross (Davross)
data
eye 3
favorite 0
comment 0
Split the original design into two parts to optimise layer strength. Print as perimeters only to maximise the camera yoke strength. Superglue the two parts together and bind with a small amount of cotton for added strength. Trimmed a small amount of the frame away around the camera hole to make for easier installation.
Topics: caddx_eos2, stl, R/C Vehicles, emax_tinyhawk, thingiverse, TinyHawk
4
4.0
Mar 3, 2021
03/21
by
Chuang Chiawei (Kelvin226)
data
eye 4
favorite 0
comment 0
Caddx EOS2 mount 14mm to 16mm for SPCMAKER X90 easy mount PLA ABS both ok v1 original version v2 Lightweight version v3 Lightweight version 2
Topics: SPCMAKER X90, thingiverse, R/C Vehicles, stl, Caddx Turbo EOS2
3
3.0
Mar 22, 2021
03/21
by
Marcin Florkiewicz (Flora_PL)
data
eye 3
favorite 0
comment 0
Alternative Mobula7 housing for use with micro camera and additional VTX Matching box for lots of accesories: https://www.thingiverse.com/thing:3723233
Topics: stl, caddx_eos2, thingiverse, R/C Vehicles, Mobula7, camera_housing, Trashcan
2
2.0
Mar 31, 2021
03/21
by
Dennis Pellenz (3DDennis1983)
data
eye 2
favorite 0
comment 0
Der Deckel muss aufrecht gedruckt werden da sonst der Clip nicht hält. The lid must be printed upright otherwise the clip will not hold
Topics: thingiverse, canon_eos, case, caddx_eos2, camera, DSLR_Canon, Camera, akku, stl
2
2.0
Apr 1, 2021
04/21
by
fire blood (yo8aiv)
data
eye 2
favorite 0
comment 0
- added front screw - added some vents
Topics: thingiverse, R/C Vehicles, beta75, eos2, stl, tiny_whoop_canopy, beta75x, tiny_whoop
4
4.0
Jun 21, 2021
06/21
by
dalton schulze (DaltzisSalt)
data
eye 4
favorite 0
comment 0
You will need to change the way they print in the slicer I will suggest the best below For most the cameras its best to print with the Lens hole on the Base ESC spacer is printed flat and the E0s2 will need to be printed upright with the camera mount toching the base. Supports on all Support Roof on all
Topics: Drone, 16x16, eos2, thingiverse, FPV, stl, Toys & Games, 16x16_fc, Little Duece, Lil Duece
6
6.0
Mar 9, 2021
03/21
by
Carl Fredriksson (Lzrmatz)
data
eye 6
favorite 0
comment 0
Remix of a pod for the Caddx EOS 2 to the Toothpick.
Topics: stl, thingiverse, eos 2, picklepod, drone pod, microdrone, toothpick, caddx, caddx_eos2, Hobby,...
2
2.0
Apr 1, 2021
04/21
by
Joshua Kirk (Squashy2828)
data
eye 2
favorite 0
comment 0
Pretty light drone frame and camera holder, weighs in total about 6g. fits racerstar 8mm brushed motors. print in 2 parts which click together. The case will hold a Caddx Turbo EOS2 camera. Important point - the motor holders are on the loose side but i use a small strip of cut down heat shrink to get the fit nice and tight. There are hooks for rubber bands to secure the battery, put a piece of foam between battery and frame. The frame will be printed upside down.
Topics: drone, Caddx_Turbo_EOS2, thingiverse, R/C Vehicles, 8520, brushed_quad, stl, fpv_camera_mount
4
4.0
Mar 4, 2021
03/21
by
John Brisbois (teckn0)
data
eye 4
favorite 0
comment 0
Pod/Canopy for the Caddx Turbo EOS2 and HGLRC GTX NANO VTX with inductrix/tiny whoop screw pattern. You'll need (2) M2x7mm or M2x8mm screws if you use washers to mount the camera. VTX bracket can be secured with (2) M1.2x4mm self tapping screws. A FXT T80 camera should work as well, but I haven't tested it.
Topics: beta75x, thingiverse, tiny, R/C Vehicles, CADDX, beta65x, pod, stl, video_transmitter, Mobula7,...
5
5.0
Mar 25, 2021
03/21
by
athos pagani (athospagani)
data
eye 5
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fjiapyHu8Ov
Topics: stl, tiny_whoop_canopy, canopy, thingiverse, 3D Printing, Anycubic_I3_Mega, tiny_whoop, eos2,...
2
2.0
Apr 2, 2021
04/21
by
Minervino Riccardo (RikkTheGaijin)
data
eye 2
favorite 0
comment 0
This is the custom canopy for the Happymodel Sailfly-X to use with the Happymodel Diamond VTX. You can see it printed and used in this video: https://youtu.be/bOCjvMburlI
Topics: drone, sailfly-x, Caddix_EOS2, Caddix, thingiverse, R/C Vehicles, camera, happymodel, canopy, stl,...
2
2.0
Jun 7, 2021
06/21
by
Alecsandru Bucsai (bucks991)
data
eye 2
favorite 0
comment 0
Camera mount for Elf88, it allows to mount 14x14 nano cams, i used the caddx eos2. Fits nicely and the front bumpers protect camera against frontal crashes without cutting your side view. Height 25mm. Camera tilt 30°. The antenna mount is designed to fit 3mm diameter standoffs with interference and works with dipole antennas with roughly 5mm diameter. Updates: 24/03 added a combined vtx and rx antenna mount. It fits 3mm plastic tubes for the rx antennas.
Topics: mount, caddx_eos2, ELF88, dipole_antenna, thingiverse, nano_camera, X2_Elf, stl, CADDX, R/C Vehicles
3
3.0
Mar 5, 2021
03/21
by
Alex Arvinte (ledroneclub)
data
eye 3
favorite 0
comment 0
If you like my work please consider following/subscribing to my feeds : [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/c/ledroneclub) ----- **There's a new version of this pod for 14x14 cams, the [PicklePod2](https://www.thingiverse.com/thing:3944156). It's a bit bigger and heavier but you may like it as well especially if you're building a 3 inch setup** If you're looking for a frame option for this canopy check my [PicklePick 65mm and 3 inch...
Topics: tiny_whoop, CADDX, toothpick, R/C Vehicles, fpv_racer, toothpick_frame, runcam, fpv_camera_mount,...
4
4.0
Mar 17, 2021
03/21
by
RYan Barnes (rynbrnz)
data
eye 4
favorite 0
comment 0
Printed In nylon with 0.3mm wide lines, The walls are only 0.6mm thick If you'd like one I can print them in nylon, just shoot me a message.
Topics: betaflight, BetaFPV_75x, eos2, Whoop, betafpv, Tinywhoop, stl, CADDX, Mobula7, tiny_whoop,...
2
2.0
Mar 21, 2021
03/21
by
Daniel Ace (DanTheBarbarian)
data
eye 2
favorite 0
comment 0
This is a combined mount for a Caddx Turbo EOS2, Happymodel Diamond VTX, and an antenna holder attachment for the Mobula 7 V3 frame. The antenna mount slides into the LED holder at the back of the frame, and will support the Emax Nano and Foxeer Lollipop 2 or 3 ufl style antennas with a bit of E6000 or hot glue to keep everything in place. I have not checked the fit for any other antennas. Use the short dampers and slide the flight controller to the bottom of the posts. The mount will fit over...
Topics: Tinywhoop, Caddx_Turbo_EOS2, stl, diamond_vtx, tinywhoop_dvr_mount, 3D Printing,...
2
2.0
Apr 1, 2021
04/21
by
Andrew Gardner (NoAgendaFPV)
data
eye 2
favorite 0
comment 0
Remixed the NSH wing lock to hold a rear facing camera, but then modified my camera mount also so it could be used for forward facing rear camera also. It should fit any of the Nano 14mm wide cameras, I have a Caddx Turbo EOS2 in the pictures, but a Foxeer Toothless2 Nano would also fit. the side holes are for M2 screws to hold the camera in .place and you should be able to pivot the camera up or down a little if needed. ** 18 Aug 2020 Update I added a second version, V2, that has 2mm spacers...
Topics: Sonic_Modell, Caddx_Turbo_EOS2, thingiverse, R/C Vehicles, Nano_Skyhunter, rmrc_nano_skyhunter,...
3
3.0
Mar 25, 2021
03/21
by
(Thump2010)
data
eye 3
favorite 0
comment 0
I apologize for the scrunched pictures, I guess thingiverse does not like 16:9 pictures. I modified one of my favorite "whoop" canopies that I designed to hold the Eachine Nano VTX in the top. Mount the VTX with the antenna and button facing the FC. I gave up on Caddx and switched to the Runcam Nano 2 but the screws do not go in as far on it as they do the EOS2 so I also thickened the camera mount area so it holds the Nano 2 tightly without washers or o-rings. I trimmed the...
Topics: stl, eachine nano vtx, R/C Vehicles, eos1, thingiverse, nano vtx, caddx, runcam nano 2, eos2,...
4
4.0
Mar 17, 2021
03/21
by
Sven v. P. (since1909)
data
eye 4
favorite 0
comment 0
Printed with TPU @ 100% infill ,12mm layer 50mm speed I really recommend it to every User of the Eachine Trashcan because the Lens is noch good protected @Stock Version. ( The shown Canopy is from here: https://www.thingiverse.com/thing:3374386 -> Props to Crazypanache :-) )
Topics: Cam, TinyWhoop, Cover, Whoop, Lens, FPV, CaddX, Tiny, Protection, stl, thingiverse, EOS2, Trashcan,...
2
2.0
Mar 25, 2021
03/21
by
Darije Caic (Darije)
data
eye 2
favorite 0
comment 0
I have not found a simple 14x14 camera holder, so i quickly sketched one up and posted it here... Hope you enjoy
Topics: stl, 14x14, fpv, R/C Vehicles, drone, thingiverse, Radio controlled, Caddix_EOS2, racing drone, Rc...
6
6.0
Jun 21, 2021
06/21
by
Alex Arvinte (ledroneclub)
data
eye 6
favorite 0
comment 0
[There's a new 3 inch version of this frame called the Evo2](https://www.thingiverse.com/thing:3790011) Follow me on [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/channel/UCapTPmZgBj52TmWORFjEoqg) ---- Here's a variant of the [Pickle mini fpv frame](https://www.thingiverse.com/thing:3359505), deadcat version, intended to use different hardware than a classic [Toothpick](https://kababfpv.com/2019/01/16/build-guide/) frame. The frame will take 65mm...
Topics: foxeer_mix, R/C Vehicles, caddx_eos2, thingiverse, betafpv, nano, pickle, runcam, stl, toothpick,...
4
4.0
Mar 4, 2021
03/21
by
greg nicholls (BuiltBrokenGlued)
data
eye 4
favorite 0
comment 0
Hi, take a look at my other designs https://www.thingiverse.com/BuiltBrokenGlued/designs I designed this top mount to center mount my [TX805](https://www.banggood.com/Eachine-TX805-40CH-25-200-600-800mW-FPV-Transmitter-TX-LED-Display-Support-OSD-Pitmode-Smartaudio-p-1333984.html?rmmds=myorder&ID=512671&cur_warehouse=CN) VTX on my Omnibus F4 flight controller. It offers protection on the SD card (though it has to be disassembled to swap or remove). It also has the mount built in for a...
Topics: stl, banggood, quadcopter, omnibusF4, quad, R/C Vehicles, f4_, camera, caddex, top, mount, TX805,...
2
2.0
Mar 13, 2021
03/21
by
Andrew Gardner (NoAgendaFPV)
data
eye 2
favorite 0
comment 0
Simple mount for the 14mm size cameras, specifially the Caddx Turbo EOS2 and the Foxeer Toothless2 Nano, but would likely fit others. The only real difference is the back wall is set further back for the Foxeer due to the further forward mounting screws on that camera. holes on the bottom of the mount are spaced for the small 4 prong servo arm that come with the Emax ES9051 servo, 2 holes for the Caddx and 3 holes for the Foxeer. **18 Aug 2020 Update I added Foxeer Toothless2 Nano V2 that...
Topics: thingiverse, Servo_Mount, es9051, nano_camera_mount, foxeer_toothless2nano, Caddx_Turbo_EOS2,...
3
3.0
Mar 25, 2021
03/21
by
Angel Munoz (B0xCutter)
data
eye 3
favorite 0
comment 0
This is a reference model of the Caddx Kangaroo nano camera with a 2.1mm lens. Dimensions are 14mm x 14mm x 18mm measured against the real one. Use this model to help design mounts for your FPV frame or print for to use as a mock up!
Topics: stl, caddx_micro_cam, fpv, reference, miniquad, Models, thingiverse, mini quad, nano camera, caddx...
4
4.0
Apr 20, 2021
04/21
by
Derek B. (Airmaxx23)
data
eye 4
favorite 0
comment 0
This a modified version of the Spiked Beta75x canopy, found here (https://www.thingiverse.com/thing:3275140), for the Eachine Trashcan and Beta85X. It will work with any whoop style frame when using the Caddx EOS2 camera. I added a front mounting tab and the ability to mount the Caddx EOS2 camera directly to the canopy without additional mounts or hardware. Any camera that is 14mm wide should work as well. This is designed to be printed in TPU.
Topics: thingiverse, caddx, beta85x, eos, Trashcan, eachine, betfpv, mobula 7, mobula, eos2, stl, beta65x,...
3
3.0
Jun 21, 2021
06/21
by
David Cledon (Dave_C_FPV)
data
eye 3
favorite 0
comment 0
THE GATEHUNTER TOOTHPICK POD ================================ Finally, my first Kabab FPV inspired toothpick style build with a custom pod I designed for the Caddx EOS 2. I was really curious if these things actually fly as well people say and I was not disappointed! The speed of this little quad (although it is really fast for its size) was actually not the most impressive thing about it. What really blew my mind was how good the flight characteristics are. While the other micros I flew all...
Topics: fpv_camera_mount, R/C Vehicles, caddx_eos2, tiny_whoop, thingiverse, fpv_racing, kabab_fpv,...
3
3.0
Mar 5, 2021
03/21
by
gabe brown (gabebrown77)
data
eye 3
favorite 0
comment 0
This is a frame inspired by Kababfpv's toothpick frame. This is a 100mm size quad that accommodates 2.5" props. The frame fits the Amax 1103 motors and crazybee F4 or any other brushless whoop board. It also has 16x16mm mounting. The pod is inspired by the BoltRC Kraken frame but is a smaller version (small Kraken = squid). It includes a mount for the Caddx EOS2. I have included the DXF files for carbon fibre cutting as well as STL files for a 3D printed version (it will not fly as well...
Topics: XT30, XM_Reciever_Mount, caddx_eos, 65mm_prop, toothpick, kingkong_65mm, carbon_fiber, R/C...
2
2.0
Mar 24, 2021
03/21
by
Jindrich Solar (Gophy)
data
eye 2
favorite 0
comment 0
- Fits nano size cameras like Caddx EOS 2 / Runcam Nano 2 / Nano Racer... - Designed for 13mm wide camera housing, 14mm wide PCB (Measured on EOS2) - Recommended camera screws - M2*5 - Recommended mounting screws M2*4 or longer
Topics: mount, Curtain_Stopper, racer, eachine, curtain_rail_stop, micro, eos2, 28mm, camera, tyro, nano 2,...
2
2.0
Mar 24, 2021
03/21
by
Jindrich Solar (Gophy)
data
eye 2
favorite 0
comment 0
NEW UPDATED VERSION HERE : https://www.thingiverse.com/thing:3846646 My custom light and super durable frame for toothpick style builds which fits up to 3" props ! *Photos from my older 2.5" version but this one looks basically the same* - Currently there is only version for M2 4-hole pattern motors but if you would like to build it and own motors with different mounting patter, let me know and i can customize it for you ! ( Designed before Kababs toothpick, 1st version released in...
Topics: for, props, mount, system, prop, racer, micro, pickle, compatible, mounting, class, eos2, griff,...
3
3.0
Mar 5, 2021
03/21
by
Jindrich Solar (Gophy)
data
eye 3
favorite 0
comment 0
NEW UPDATED VERSION HERE : https://www.thingiverse.com/thing:3846646 - My custom light and super durable frame for power whoop transplants and up to 2.5" ! - (Not inspired by Kabab FPVs toothpick, 1st version released in summer 2018 ! https://www.thingiverse.com/thing:3098317) - Designed for : - CrazyBee AIO FC (35*35mm pattern - M2 screws) - Camera mount fits most of AIO cameras... 10mm lens diameter - Use two short M2 screw to hold Camera mount part 1 and 2 toghether (M2*3, M2*4) - Motor...
Topics: swap, quadcopter, rcnano, frame, style, size, bracket, 070x, small, kabab, whoop, diy, runcam,...
