3
3.0
Apr 30, 2022
04/22
Apr 30, 2022
by
www.iaph.in
texts
eye 3
favorite 0
comment 0
The present study investigates the conversion efficacy of glucose into calcium salt of gluconic acid (calcium gluconate) through fermentation by using the fungus Aspergillus niger (A. niger) . The study further evaluates the impact of various process parameters and thereby identifies the optimum parameters to maximize the output. The different process parameters evaluated in this study were glucose concentration, pH, temperature, and aeration. After that, the optimized process pre-treatment...
Topics: Aspergillus niger, calcium gluconate, fermentation, gluconic acid, optimization, techno-economic...
1
1.0
Feb 21, 2022
02/22
Feb 21, 2022
by
The Succ (Lord_Succ)
data
eye 1
favorite 0
comment 0
The Stub airlock is an invincible airlock using very little water and 29g of filament at 100% infill with support. It will be waterproof with any filament, it is invincible, it might be overkill, but it will work. With a 40$ 1kg roll of filament the stub cost 1.20 The very small exit hole ensures nothing unwanted enters easily, even without the water an active ferment will push out enough co2 to stop anything. Thick walls ensure rigidity and watertightness even with sub par printers
Topics: thingiverse, fermentation_airlock, fermentation, Airlock, stl, Hobby
The gut microbiome can greatly influence the health of the organism, but is often overlooked when considering lifestyle dietary choices. On this episode, Dr. William Davis discussed his new book, Super Gut.
Topics: science, metabolism, gut, microbiome, diet, fermentation, groks
Source: Groks Science Radio Show and Podcast
2
2.0
Jan 25, 2022
01/22
Jan 25, 2022
by
The Succ (Lord_Succ)
data
eye 2
favorite 0
comment 0
The stub is an airlock meant to be cheap, waterproof with any filament, and practically invincible. It is small, but that is its greatest strength. With only approx~27g of filament at 100% infill with supports. It is cheaper than buying a real airlock, with a 40 dollar role of filament this cost $1.08. You can reduce the amount of filament by thinning out the walls. Small yet affective a bit of glue can make any bottle a fermenter with the stub.
Topics: thingiverse, airlock, fermenting, fermenter, fermentation, stl, Hobby
4
4.0
Jan 8, 2022
01/22
Jan 8, 2022
by
SHEA CLOSE (Shea_Close)
data
eye 4
favorite 0
comment 0
This is a couple of different options for an Inkbird ITC-1000 enclosure. It is designed to fit a standard squared outlet (the straps will need to be shortened to fit within the enclosure.) There are four knockouts sized for 1/2 connectors to protect power source. Designed to minimize need for supports The 2-gang box can be used as a single stage (cold/hot,) or if you snap the connector on the outlet, can be used to control both hot and cold. Also available in 3-gang (for separate hot/cold...
Topics: homebrewing, thingiverse, INKBIRD_ITC-1000, fermentation, Electronics, beer, temperature_control,...
Sourdough is the oldest form of leavened bread and has been used since the time of the pharaohs. Sourdough is a mixture of flour and water that is fermented by naturally present Lactic Acid Bacteria (LAB) and yeast. With modernization and an increase in demand, the bread industry currently produces easy to leaven soft bread using Baker’s yeast. To get a sourdough bread with consistent flavors and texture is considered to be an art and skill. The purpose of our endeavor has been to bring in...
Topics: Sourdough Bread, Solid State Fermentation, Lactic Acid Bacteria (LAB), Yeast, Bio-flavor, Probiotic
28
28
2022
2022
2022
by
RTHK / EBS / ARIRANG
movies
eye 28
favorite 0
comment 0
The Science Of Cooking【煮食科學】 The human race of the world has been creating countless ways of cooking food. Cooking is the result of human efforts to extract energy from the nature. And within those efforts lies the essence of wisdom achieved by humankind. This documentary series takes a look at the world of cooking for a new perspective, which is a journey of endless coincidence, adventures, and unexpectations. "The Science of Cooking" unfolds the four basic science of...
Topics: The Science Of Cooking, 煮食科學, Heat, 熱力, 溫度, 煮食, Cooking, 力量, Force, 麵糰,...
0
0.0
Dec 31, 2021
12/21
Dec 31, 2021
by
@iaset
texts
eye 0
favorite 0
comment 0
There are huge biomass waste disposed every day in agricultural countries that can be useful and are potential to mankind. These wastes can be useful in production of biofuels like bioethanol. In future bioethanol can be used instead of petroleum fuels that pollute our environment. In biofuel production various process like saccharification and selection of proper microbial strains are important. Using biomass to make bioethanol is cheap and help to clean waste in environment. Although the...
Topics: Bioethanol, Biomass, Fermentation, Distillation, Saccharification and Purification
Three fungus strains were isolated from compost to make Pectinase. It was determined that cultivation of Talaromyces aurantiacus, Penicillium oxalate and Aspergillius niger on orange peel substrate under various SSF conditions is a low- cost alternative to submerged-liquid fermentation when it comes to pectinase production. Optimization of environmental conditions for Pectinase production was carried out using Pectinase screening agar media (PSAM). Among other factors, 0 the parameters that...
Topics: Pectinases, Enzyme, Optimization, Pectinase, Solid State Fermentation
2
2.0
Dec 20, 2021
12/21
Dec 20, 2021
by
bence voros (vbence121)
data
eye 2
favorite 0
comment 0
A quick and dirty remix of the original to include enough space at the bottom for an 1860 battery holder. It could be glued in or for a more solid/"permanent" solution the zip-tie holes have also been moved so that they can still be used. For me it was easier and safer to find a battery with no wires attached and instead use a holder. Hopefully it can come in handy to someone else. (I will post some pictures once I manage to find time to take photos.)
Topics: homebrewing, iSpindel, thingiverse, fermentation, homebrew, Electronics, beer, 1860, ispindle, stl
2
2.0
Dec 6, 2021
12/21
Dec 6, 2021
by
JAN VOJÍŘ (jvoj)
data
eye 2
favorite 0
comment 0
Bubble counter for monitoring fermentation process. I cracked open [one of these](https://www.aliexpress.com/item/33004482943.html?spm=a2g0s.9042311.0.0.27424c4dsiZIjQ) to make them wider. Afterwards just place it in this rig connect to esp8266 and you should be ready to go. If anyone interested I can share code. Idea came from [this guy](https://www.programmingelectronics.com/homebrewing-arduino-student-project/)
Topics: beer, Hobby, stl, homebrewing, fermentation, thingiverse, wine
2
2.0
Aug 23, 2021
08/21
Aug 23, 2021
by
Alex (ale5701)
data
eye 2
favorite 0
comment 0
A stopper for a bottle under a fermentation lock. The diameter of the bottle neck is 43 mm, 47 mm. The diameter of the central hole for the fermentation lock is 10 mm.
Topics: Wine_Bottle, stl, fermentation_lock, hydraulic, thingiverse, hydraulic_seal, stopper, Kitchen &...
2
2.0
Aug 3, 2021
08/21
Aug 3, 2021
by
Hans N. (Hans_n)
data
eye 2
favorite 0
comment 0
Beim Fermentieren ist es wichtig, dass alles im Glas mit Flüssigkeit bedeckt bleibt. Spezielle Glasgewichte sind teuer, weil man als Gartenbesitzer mit 4, oder 8 Stück, nicht weit kommt. Zum Glück gibt es die kleinen Deckel von Weck relativ günstig zu kaufen. https://www.amazon.de/Weck-Weckdeckel-Ersatzdeckel-Einmachgl%C3%A4ser-Gl%C3%A4ser/dp/B00EM6CPWO Leider sind die Deckel von weck etwas zu flach und für große Gläser zu klein. Hier schaffen zwei der Teile in erträglicher Druckzeit...
Topics: thingiverse, Kitchen & Dining, Fermentation, weck, stl
Probiotics are defined as nonpathogenic living microorganisms, that have beneficial effects on host health. The most important and frequently used functional food compounds are probiotics and fermented foods. Functional foods have numerous beneficial nutritional effects. Probiotics dairy foods, idli, dhokla, pickles etc are traditional Indian foods that beneficially affect the host. They improve survival and implantation of live microbial supplements. In our study, probiotics were isolated from...
Topics: Fermentation, Probiotics, Lactic acid bacteria, Yeast
Enzymes are produced by a wide range of living things including bacteria, fungi, plants and animals. Fungal enzymes are preferred over other microbial sources owing to their widely accepted Generally Regarded As Safe (GRAS) status. Amylase is one of the most widely used enzymes in the biotechnology industry with a global market of over $4 bn as at 2015. However, the synthetic media used for the production of this enzyme is becoming costlier and has become a subject of concern for many...
Topics: Amylase, Aspergillus niger, Solid state fermentation
3
3.0
Jun 14, 2021
06/21
Jun 14, 2021
by
Robert Skogvold (robertskogvold)
data
eye 3
favorite 0
comment 0
This is a mounting bracket to attach the syphon tube to the fermentation bucket (from Vestbrygg). This bracket have a perfect press fit. I have made three brackets with different holes so this bracket can fit different tubes: 14,5mm, 17mm and 18,5mm
Topics: Food & Drink, homebrewing, beer, thingiverse, accessory, hevert, ø, lbrygging,...
3
3.0
Jun 14, 2021
06/21
Jun 14, 2021
by
Robert Skogvold (robertskogvold)
data
eye 3
favorite 0
comment 0
This is a wrench tool for those who have poor hand function to tighten or remove the nut for the lever tap on the fermentation bucket.
Topics: Food & Drink, homebrewing, beer, thingiverse, accessory, ø, lbrygging, hjemmebrygg,...
The dark and strange historical event of an heir to the Jameson whiskey fortune paying to watch a girl be eaten by cannibals.
Topics: Podcast, tennessee whiskey, jameson, alcohol history, beer history, strange, whisky, emin pasha...
6
6.0
Apr 21, 2021
04/21
Apr 21, 2021
by
Vincent Forgione (vjf3)
data
eye 6
favorite 0
comment 0
*Update 22-Apr-21* All of a sudden, on my home printer, the ".25" stl wasn't being recognized. Had something to do with the ".", so I renamed it to "0pt25" just to be sure. Works again on home printer. Weird... 38-400 caps for home brewing. Have you every grabbed some cider and kept the jug to ferment in? Well, so have I and now when I run out of bungs, I can use these caps to either seal or ferment in...when I lose the metal cap :) Designed to have room for a lid...
Topics: stl, 38-400, carboy_bung, carboy, brewing, Other, thingiverse, airlock, homebrewing, fermentation
5
5.0
Apr 20, 2021
04/21
Apr 20, 2021
by
Vincent Forgione (vjf3)
data
eye 5
favorite 0
comment 0
38-400 caps for home brewing. Have you every grabbed some cider and kept the jug to ferment in? Well, so have I and now when I run out of bungs, I can use these caps to either seal or ferment in...when I lose the metal cap :) Designed to have room for a lid seal - TPU .stl included for a plain cap and for one with a .25 inch hole which is perfect for a grommet. I verified that the cap with TPU seal does seem to be air-tight and allows airlock to bubble. Will also accept bone-fide 38 mm lid seals
Topics: stl, 38-400, growler, beer_growler, CarBoy, 38mm, bung, homebrew, Containers, thingiverse, 38 mm,...
5
5.0
Apr 17, 2021
04/21
Apr 17, 2021
by
(joergp)
data
eye 5
favorite 0
comment 0
# When fermentation goes wild This thing is about fermenting beer. Usually an airlock will be sufficient for your fermentation, but sometimes – if the head space in the fermenter is tight or the yeast is too aggressive – you will need a blow off tube. I designed this after lessons learned (my fermentation spilled over for the first time). It's a custom lid for wide mouth mason jars. ## Variants for your setup I did a poll on two homebrew groups to determine the most used inner hose...
Topics: stl, mason_jar, beer_brewing, mason, plaato, Hobby, brewing, beerbrewing, thingiverse, airlock,...
4
4.0
Apr 6, 2021
04/21
Apr 6, 2021
by
Mark Boughen (mBoughen75)
data
eye 4
favorite 0
comment 0
A mount to hold a 400ml Klip Fresh food container (105ml tall) for used for fermentation blowoff.. Adhesive tape on the rear of the mount allows you to stick the blowoff mount to a suitable surface. I use these inside my temperature controlled brewing fridges.
Topics: stl, Kitchen & Dining, homebrew, thingiverse, homebrewing, fermentation
Chef Robin presents common and easily obtained foods beneficial for your digestion, with an emphasis on the healthful properties of cultured and fermented foods. Chef Robin details the meaning of probiotic and prebiotic as they relate to diet. Special thanks to AARP Vermont, CCTV Town Meeting TV, City Market, Heineberg Community Senior Center, & Vermont Foodbank. https://linktr.ee/townmeetingtv Town Meeting TV is a free speech forum and the ideas expressed do not necessarily reflect the...
Topics: Vermont, Burlington, CHANNEL 17 - TOWN MEETING TV, CCTV17, Government Access TV, Community Media,...
Mead is an often overlooked and misunderstood drink. But, in recent years, it has grown in popularity, especially in the Midwest. Mead makers come to the craft from a variety of backgrounds. On today's show we will meet Kent Waldeck, a former manufacturing project manager who took his Ohio mead making business full time. In Wisconsin, we are introduced to Colleen Bos, who has two master's degrees in Medieval History and plays in a bluegrass band. She's also the founder of Bos Meadery that...
Topics: Podcast, fooways, diversity, midwest, agriculture, capri cafaro, culture, kansas, minnesota,...
4
4.0
Mar 11, 2021
03/21
Mar 11, 2021
by
Jeremiah Lehman (kbeanio)
data
eye 4
favorite 0
comment 0
Jar band and air-lock top for US standard 1-gallon pickle jars with 6-tab thread on 27mm pitch and opening OD (unthreaded portion) of 96.4mm. The band is typically used with coffee-filter paper for aerobic fermentation and the airlock top for anaerobic secondary ferments. On the airlock top, a standard 3-piece airlock can be installed using a small piece of 3/8 ID x 9/16 silicone tubing (substitute as needed, of course). An airtight glass-to-lid seal can be made using liquid rubber. While I've...
Topics: stl, glass_jar, lid, Replacement Parts, band, thingiverse, airlock, jar, fermentation
6
6.0
Feb 28, 2021
02/21
Feb 28, 2021
by
Allan Korup (Piloten)
data
eye 6
favorite 0
comment 0
Needed an Air Lock for my cider brewing, so I made it :-) It makes a nice sound...almost like an old clock .. tick, tick, tick ... I just drilled a hole in the lid of a 10 liter can, an squezed it in with a rubber seal for electrical wiring.
Topics: homebrewing, fermentation, cider, thingiverse, Food & Drink, air lock, stl, brew
4
4.0
Jan 26, 2021
01/21
Jan 26, 2021
by
Saturday Sazaran (saturdayxiii)
data
eye 4
favorite 0
comment 0
Screw cap fitted for the No Name jars with a hole to hold one of those silicone fermenting things. I usually get them with salsa, but there's plenty of generic jars this should fit. Fits a jar mouth of about 80mm. Honestly, this lid doesn't fit perfectly, but after a couple tries it does go on straight and make a seal. If I print it again I might try scaling the whole thing 1/2mm larger. If anyone wants to try getting more precise measurements, or try design for a different jar size all...
Topics: Kitchen & Dining, fermentation, thingiverse, lid, jar, stl, canning
4
4.0
Jan 11, 2021
01/21
Jan 11, 2021
by
sven haiges (hansamann)
data
eye 4
favorite 0
comment 0
These are the 3D printable files (and OpenSCAD source) for a DIY fermentation counter. It will fit the official Speidel fermentation fermlocks/fermentation locks. To complete this project you will need to print all 3 items, posess an official Speidel fermlock and get the electronics such as the line following sensor (which tracks the movement of a cake pop stick / fermentation), DS18B20 temp sensor and a CubeCell LoraWAN dev board or a similar microcontroller/Arduino dev board. Full project...
Topics: homebrew, thingiverse, homebrewing, beer, brewing, fermentation, speidel, DIY, counter, fermlock,...
In this paper, we select Ginkgo biloba leaves in Taizhou as raw materials and use cellulase and pectinase to hydrolyze Ginkgo biloba leaves, and then the Ginkgo biloba leaves extract was prepared by microbial fermentation. Firstly, cellulase and pectinase were selected for single factor experiment and orthogonal experiment to determine the effect of enzyme dosage, enzymolysis time, temperature and pH value on the extraction rate of Ginkgo biloba leaves; then, microbial fermentation was used to...
Topics: Ginkgo biloba, enzymolysis, fermentation, Ginkgo biloba extract.
18
18
Dec 20, 2020
12/20
Dec 20, 2020
by
Rodica STURZA, Valentin GUDUMAC, Olga DESEATNICOVA, Aliona GHENDOV-MOSANU
texts
eye 18
favorite 0
comment 0
Abstract Introduction. One of the major problems characterizing the nutritional status is the iron deficiency, which leads to decreased immunity, increased incidence of infectious diseases and anemia. Obviously, only well-thought-out corrections can solve these disorders. Material and methods In order to know the influence of the method of manufacture for iron-fortified products on the iron level, a series of in vivo research was carried out, on a batch of 21 white rats, Wistar line,...
Topics: iron anemia, rats, in vivo research, fortified bread, lactic acid fermentation peripheral blood...
3
3.0
Dec 2, 2020
12/20
Dec 2, 2020
by
Jordan Runsvold (jrunsvold)
data
eye 3
favorite 0
comment 0
Stand for two airlocks in small size universal stoppers. Base has pockets for optional 5mm neodymium cube magnets to help hold it to chest freezers, etc. Helps me keep from spilling the starsan out or dropping them on the ground! :)
Topics: stl, wine, Hobby, fermentation, brewing, beer, thingiverse, homebrewing, fermenter
4
4.0
Nov 28, 2020
11/20
Nov 28, 2020
by
Matthew Hoying (heartRobotic)
data
eye 4
favorite 0
comment 0
I lost the plug/bung for my reCAP mason jar tops (https://www.recapmasonjars.com/) that accept a standard airlock. This is a direct replacement that should work for any opening 25-28mm wide.
Topics: stl, fermenting, fermentation, Replacement Parts, reCAP, airlock, thingiverse, fermenter
Let it sit and watch the science happen: Neil deGrasse Tyson and co-host Chuck Nice answer Cosmic Queries about fermentation with Arielle Johnson, PhD, science officer on Good Eats, food writer, and formerly the in-house R&D scientist at Noma.
Topics: Podcast, Episode, Science Podcast, Food, StarTalk, star talk, Neil deGrasse Tyson, Chuck Nice,...
3
3.0
Jul 20, 2020
07/20
Jul 20, 2020
by
Kim Sonne (kiso79)
data
eye 3
favorite 0
comment 0
Magnetic Stirrer with a 120 mm fan as the motor. A speed controller for reduction of speed may be needed.
Topics: thingiverse, stl, Machine Tools, fermentation, stirrer, magnetic stirrer, beer
3
3.0
Jul 19, 2020
07/20
Jul 19, 2020
by
bence voros (vbence121)
data
eye 3
favorite 0
comment 0
A bottle cap designed to fit 5L (~55mm) PET water bottles, with a hole (11mm) to accept an airlock. I have seen other similar designs (particularly DennyNC's) but they are for a smaller mouth bottle and doesn't work after up-scaling to the proper size. I just took danceyoga's design and added an 11mm hole in the middle. After printing the hole came out slightly undersized for me but it worked for my airlock. I'm currently testing it with a batch and plan to improve upon the design. Things to...
Topics: fermenter, homebrewing, cap, homebrew, bottle, Bottle_cap, fermentation, stl, thingiverse, Other
4
4.0
Jul 17, 2020
07/20
Jul 17, 2020
by
Isaac Pereira (isaacp90)
data
eye 4
favorite 0
comment 0
Air lock designed for in-bottle fermenting, originally I designed it for fermenting cider in glass bottles but it should work with any bottles with a mouth diameter between 24 - 30mm (potentially others if you scale the model before printing) To use simply fill with water from the top then insert tightly into neck of bottle (some silicon tape/rubber band/ teflon tape would all help in making a tighter seal but I haven't had any issues using the print as is)
Topics: fermenting, beer, thingiverse, stl, wine, Kitchen & Dining, bottle, cider, fermentation
4
4.0
Jun 30, 2020
06/20
Jun 30, 2020
by
Adrian Brizuela (adrianbrizuela)
data
eye 4
favorite 0
comment 0
baguette bread fermentation mold, 20 cm, two can be joined to extend to 40 cm
Topics: thingiverse, stl, baguette mold, baguette, fermentation, molde para baguette, Food & Drink
3
3.0
Jun 19, 2020
06/20
Jun 19, 2020
by
Tom Jalbert (Tom_the_Builder)
data
eye 3
favorite 0
comment 0
I like to make small batches of fermented foods in large mouth canning jars. This spacer is used in conjunction with marbles to keep the vegetables fully submerged in the brine. I also use the one-way valve from a coffee filter to allow the CO2 out while preventing air from coming in.
Topics: stl, thingiverse, fermenting, pickle, fermentation, pickling, Kitchen & Dining
La fermentation alcoolique est une réaction que nous utilisons pour la production de certains aliments que nous aimons manger, comme le pain et le vin. Découvrez pourquoi elle a lieu et dans quelles conditions. Retrouvez des milliers d'autres vidéos et exercices interactifs 100% gratuits sur http://fr.khanacademy.org Source: https://www.youtube.com/watch?v=wwYZC-Nnxuw Uploader: KhanAcademyFrancophone
Topics: Youtube, video, Education, fermentation, fermentation alcoolique, alcool, éthanol, fermentation...
La fermentation lactique est une réaction que nous utilisons pour la production de certains aliments que nous aimons manger, comme le yaourt. Découvrez pourquoi elle a lieu et dans quelles conditions. Retrouvez des milliers d'autres vidéos et exercices interactifs 100% gratuits sur http://fr.khanacademy.org Source: https://www.youtube.com/watch?v=fu1tChgK-zE Uploader: KhanAcademyFrancophone
Topics: Youtube, video, Education, fermentation, fermentation lactique, lactate, pyruvate, réaction,...
50
50
Apr 30, 2020
04/20
Apr 30, 2020
by
@ impact
texts
eye 50
favorite 0
comment 0
At present day we are facing a problem of fuel shortage. Near about 70% fuel contained alcohol to avoid shortage we have to find out alternative method of alcohol production. Besides that, the bio fuels are obtained from green biomass can also represent the promising type of energy source. Alcohol one of fermented product prepare by fermented techniques. The whole investigation done on the basis of fermentation process Fermentation is the technique in the development of new products by changing...
Topics: Maize Stem, Guinea Stem, Fermentation, Alcohol
56
56
Apr 30, 2020
04/20
Apr 30, 2020
by
@ impact
texts
eye 56
favorite 0
comment 0
At present day we are facing a problem of fuel shortage. Near about 70% fuel contained alcohol to avoid shortage we have to find out alternative method of alcohol production. Besides that, the bio fuels are obtained from green biomass can also represent the promising type of energy source.
Topics: Maize Stem, Guinea Stem, Fermentation, Alcohol
3
3.0
Apr 26, 2020
04/20
Apr 26, 2020
by
Ernst Starlinger (maverick89)
data
eye 3
favorite 0
comment 0
Let me introduce my self made fermentation data logger "Fermy". Why Fermy...? I simply had no better idea! How the system works: The Fermy system records the amount of bubbles per minute, which pass the fermentation tube, the beer temperature and the ambient temperature, pressure and humidity. The sensor itself is connected to a wifi-network and the MQTT-broker (Raspberry Pi) subscribes to the topics of the sensor. Via Node-Red and Telegraf, the data were sent to a InfluxDB database,...
Topics: thingiverse, craft_beer, fermentation, brewing, stl, beer, beer_brewing, fermentation monitor, DIY,...
5
5.0
Apr 26, 2020
04/20
Apr 26, 2020
by
Asia Bergamini (yeah_its_asia)
data
eye 5
favorite 0
comment 0
English is down below!! Il coperchio è pensato per il tipo di vaso generico (come i Bormioli) con un'apertura di diametro esterno di circa ~112 mm (con inclusa la filettatura). Penso sia possibile adattarlo anche ad altri diametri solo scalando il modello e mantenendo le proporzioni. Altre informazioni sulla stampa sono in "Print Setting" :) In questi giorni di quarantena mi sono cimentata nel design di un tappo apposta per il vasetto del mio lievito madre, in modo che possa...
Topics: thingiverse, fermentation, bread, lid, yeast, Kitchen & Dining, stl, mason_jar, sourdough
3
3.0
Apr 23, 2020
04/20
Apr 23, 2020
by
Jermee Canlas (Mswelsh)
data
eye 3
favorite 0
comment 0
This is a simple fermentation lid for wide mouth ball jars. You will still need the ball jar rings. For a better seal, you can add a rubber o-ring or foodgrade silicone between the jar and the lid. Just add water and place the cap. Make sure water level is always filled halfway. You can also use nail polish and paint the cap to know when the water level is too low.
Topics: thingiverse, fermentation, lid, wide mouth, canning, jar, Kitchen & Dining, stl, airlock, ball...
3
3.0
Apr 15, 2020
04/20
Apr 15, 2020
by
Ryan Sinatra (ryansinatra)
data
eye 3
favorite 0
comment 0
Keep those scoby boogers out of the cup when pouring your homemade kombucha :)
Topics: thingiverse, fermentation, Ferment, Brewing, Kitchen & Dining, stl, Kombucha, strainer
4
4.0
Apr 14, 2020
04/20
Apr 14, 2020
by
Chris Morrow (chrisoutdoor)
data
eye 4
favorite 0
comment 0
I recently began making a starter culture to bake sourdough bread. One requirement is to have a fabric lid on a glass jar to allow the culture to breathe and grow properly. Rather than constantly using rubber bands to attach the cloth, i used a glass jar with a spring clip lid, then printed out a new lid. I then use the existing wire spring and a rubber band to attach the fabric onto the top of the new lid. This makes accessing the starter culture much easier
Topics: thingiverse, fermentation, lid, jar, glass_jar, ferment, stl, wire_clip, Containers, fabric
3
3.0
Apr 6, 2020
04/20
Apr 6, 2020
by
Hugo (8u9o)
data
eye 3
favorite 0
comment 0
!!!Proof of concept!!! You're better spending 1€ in a professional one. I wanted a design, that I could print quickly, watertight and transparent; thanks PETg. standard 8.75mm diameter No angle above 45°, perfect for good overhangs. The pic is a representation of the final print, not the stl. You NEED to activate spiralize/vase mode otherwise it only a plan block. Update 1: Added a second version to print in "normal" mode, 3 parameters, 0.15 Layer Height,0.4 line width, 100%...
Topics: alcool, brewing, spiral, fermentation, homebrewing, bubbler, homebrew, cidre, stl, airlock, wine,...
Studies on microorganisms associated with rumen substrates of goat ( Capra aegagrus hircus) were done through aerobic and anaerobic fermentation for a period of 12 days. Microscopic, biochemical and molecular identification were carried out. Also proximate values of the substrates over the period of fermentation were analyzed. Seven (7) aerobic bacteria species were isolated, viz.; Bacillus spp, Escherichia coli , Lactobacillus spp, Proteus spp, Pseudomonas spp, Staphylococcus spp, and Serratia...
Topics: Rumen substrates, Goat, Aerobic bacteria, Fermentation, 16S ribosomal RNA.
Biofuels have been regaining popularity due to the rising price of oil, along with the growing concern about global warming caused by carbon dioxide emissions. Biofuels are processed from plant resources and are mostly made up of cellulose, which is one of the toughest materials. If cellulose can be turned into biofuel, it could be more efficient than other commercially available fuels starchy tuber. The of this study is on bioethanol production from starchy tuber. The comparative study was...
Topics: Alcoholometry, Biofuel, Hydrolysis, Fermentation.
