0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Daniel Argüello (Dani_Projects)
data
eye 0
favorite 0
comment 0
GoPro 9/10 universal case for fpv drone and others. This has the capacity to put a GoPro with external ND filter
Topics: GoPro_Mount, Gopro_ND_filter, gopro_hero_10, fpv_camera, fpv_camera_mount, stl, ND_filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Brayan Ricardo Gochicoa Cerna (NabucodonosorII)
data
eye 0
favorite 0
comment 0
Wanted a filter because fillament came a little bit too dusty, i already had a fillament guide that required drilling the top of my enclosure (link in remix source) so i just added a base that molds around that guide. Havent Printed it, yet. - Nabuconodosor II
Topics: 3D Printer Accessories, ikea_lack, fillament_guide, stl, lack, thingiverse, dust_filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Sr Ditamus (SrDitamus)
data
eye 0
favorite 0
comment 0
This simple plate allows you to add a filter to the 120mm fan aperture by Inertpyro. This mounts to the back of the base plate. Just cuts some filter fabric (I use MERV 16 fabric I found on amazon) and slide it into the gap. This will filter any air if the iris is used as an intake.
Topics: 3D Printer Accessories, filter, air_filter, stl, aperture, iris, thingiverse, dust_filter
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Sajan Shakya (Aviator_Sajan)
data
eye 0
favorite 0
comment 0
Compatible self designed soil filter/holder for Pret a pousser LILO. Soil holder for Pret a pousser . Please see photo attached
Topics: houseplants, internal, garden, seeds, soil, Soil holder, stl, plants, thingiverse, soil filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Alessandro Bava (moserello)
data
eye 0
favorite 0
comment 0
This is a simple TPU mount for Telesin ND filters in order to fit the NamelessRC GoPro10 Naked KIT Infill 99%
Topics: Naked_GoPro, telesin_nd_filter, stl, thingiverse, GoPro, R/C Vehicles
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Kag Man (kagman)
data
eye 0
favorite 0
comment 0
***6/26/22 +updated cap to be symmetrical, higher resolution *** Part made for possible new filter design...this fits in the bottom filter opening. Do not run your spa with the filter plugged. Uploaded for future designs or remixes.
Topics: artic spa, stl, artic spa filter, thingiverse, Replacement Parts
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Calamity Lime (CalamityLime)
data
eye 0
favorite 0
comment 0
A HEPA filter box I made to help with the dust in my tinkering space. I made the walls fairly thin for quicker printing while keeping them thick enough for some strength. I have two holes on the side of the box, larger one for a barrel jack socket and a smaller one for a toggle switch. You can use the switch to turn it on or off but I used it to switch between 12 volt and 9 volt. It takes a 140mm PC fan. I advice getting a fan splitter so you're not cutting the wire on the fan itself. Use a...
Topics: 140mm_fan, filter, particle, solder_fume_extractor, MPCNC, hepa, air_filtration, air_filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Make Cake (MakeCake)
data
eye 0
favorite 0
comment 0
Air Filter Mount for Dremel 3D40. Just print the new 'fan case', put in an active-carbon filter, affix the new fan case on the original fan cover (without screws or glue!) and enjoy fresh air during printing ;-)
Topics: air_filter, stl, 3d40, thingiverse, 3D Printers
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Mark Nommer (markeenore)
data
eye 0
favorite 0
comment 0
This is a try to keep Mac Mini as clean as possible even in a room where dust is present. Project page with current information and files: https://www.codemacs.com/macs/mini/mac-mini-external-air-filter.7350141.htm Regular Vent filter is used available in any hardware store.
Topics: Computer, air filter, Mac Mini, stl, thingiverse, computer, Computer_Accessories
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Franco Garetto (Franco14)
data
eye 0
favorite 0
comment 0
It's the same design as the filament guide with the dust filter and bearing, but I added the hook mechanism so I don't have to replace the hook mechanism that I prefer.
Topics: 3D Printer Accessories, filter, filament_guide, stl, ender 3, thingiverse, cleaner, filament
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Moe Chan (loco_motion)
data
eye 0
favorite 0
comment 0
This is a filter basket for the Top Fin Silenstream 20 HOB aquarium filter (also sold as the Streamax SMX450). This filter is sold by itself and also comes with the popular Top Fin 20 Gallon Aquarium Starter Kit. The filter's original design requires costly and inefficient filter cartridges. We designed a filter basket that can be used to fill the filter with your own choice of media and direct the water flow through the different layers of media. This setup both saves money and allows for...
Topics: aquarium_filter, fishtank, aquariums, stl, thingiverse, aquarium, DIY, fish, aquarium_pump
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Sr Ditamus (SrDitamus)
data
eye 0
favorite 0
comment 0
This is a super simple 120mm Fan Filter. This mounts directly on the air intake of any 120mm fan. If your fan does not have a protective grille to keep the fabric from being pulled in then use the file that includes the "back". I also included files with 20mm spacers. These are intended to be mounted inside an enclosure on the wall or ceiling. They will filter the air while allowing the enclosure to maintain temperature. You can use any type of filter cloth. I use MERV 16 fabric that...
Topics: 120mm_Fan_Grill, 120mm_FAN_Guard, fan_grill, fan_filter, filter, cover, 3D Printer Accessories,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
CHRIS MIKSOVSKY (chrismik)
data
eye 0
favorite 0
comment 0
This project allows you to mount a Katadyn BeFree water filter directly onto a Zefal or CamelBak bike bottle. You will need the following to make a functional BeFree bike filter bottle: 1) Katadyn BeFree filter (just the filter, you won't need the soft bag) 2) The printed adapter part (download and print) 3) A small o-ring: Size is Dash "028". This helps seal the BeFree filter to the adapter 4) [Semi-optional] A small check valve: This allows air to refill the bottle automatically....
Topics: Katadyn, filter, Bikepacking, stl, befree, water_filter, thingiverse, camelbak, Zefal, Outdoor...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Funky Mind (ilko)
data
eye 0
favorite 0
comment 0
Tool designed for filters with an outer diameter of 80 mm and 15 flutes. It has to be strong, so don't try to save much material on this. Tool size : 154 x 100 x 12 Recommended settings : Walls : 2.4 mm Top/Bottom : 2 mm Infill : +20%
Topics: filtre, huile, filter, flutes, Tools, pans, stl, thingiverse, oil
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Bruce Blackstone (Brownshoe)
data
eye 0
favorite 0
comment 0
I wanted a honeycomb filter for my flash but it was either overpriced, cheaply made, or both. So I designed one around the contours of my Altura AP-N1001 flash in Blender. The shape is fairly universal to flashes of this type. Please note that I scaled the model in a slicer (I used Simplyfied3D) so that the widest end is set to 74mm to fit my flash. Your size may vary. In S3D, the model imports are very tiny. In Cura, it's a little too big. I used standard PLA settings, no support if you...
Topics: flash, camera, flash filter, honeycomb, stl, thingiverse, Camera
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
survival panda (survivalpanda)
data
eye 0
favorite 0
comment 0
it a 3d model for making gravity filter like Sawyer Squeeze. Made from Chinese copy of befree from aliexpress you can buy filter here http://alii.pub/6cfczc
Topics: filter, outdoor, ultralight, camping, water_bottle, water, Survival, stl, water_filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Rial X (RialX)
data
eye 0
favorite 0
comment 0
ND Filter support. Similiar to the original, but in TPU and more secure I think.
Topics: NDFilter, gopro8nd, skyreat, Fpv nd mount, gp8, Filter, Fpv, Gopro_ndfilter, gopro8, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
houston yates (Hyates21)
data
eye 0
favorite 0
comment 0
this is a simple turbo guard I made to protect the compressor from debris being sucked in the turbo when an air filter doesn't fit or for testing purposes, i recommend a higher heat filament like ASA, I uploaded three common sizes but these can be scaled easily to any size turbo inlet, just add an appropriately sized clamp and enjoy!
Topics: Boost, turbine, filter, boosted, Garrett, turbocharged, air_filter, stl, holset, psi, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Bogdan Triculescu (KhePeR)
data
eye 0
favorite 0
comment 0
A pop filter for the Trust GXT 244 BUZZ microphone
Topics: Microphone, gtx_244, stl, thingiverse, pop_filter, Audio
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
houston yates (Hyates21)
data
eye 0
favorite 0
comment 0
These are simple guards to protect the turbo compressor wheel from large debris being sucked in, for applications where a filter doesn't fit or for racing/test purposes, I do recommend a temperature resistant filament like ASA, currently uploaded in 3, 3.5 and 4 inch but can easily be rescaled to fit any other sizes, enjoy!
Topics: Boost, car, filter, turbo guard, screen, Garrett, turbo filter, air_filter, turbo screen, stl,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Al Roman (adalroman)
data
eye 0
favorite 0
comment 0
I bought a RODE SM6 shock mount used without the internal part. Which makes it useless. So I modeled a center Mic mount in Fusion360 to replace the missing part. I only used pictures since I do not own the center part. Works Great ! Mic can now be mounted in Shock Mount.
Topics: Microphone, filter, shock mount, Audio, stl, thingiverse, missing, rode, pop screen, broken
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Eric Landis (ecszone)
data
eye 0
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/b2WYr7Cnlmd Jandy only sells this as a assembly for a lot of money. I only needed the union socket because my pool installer glued the fitting. I glued the pvc pipe to the pla socket using JB plasticweld epoxy. so far so good. The gasket indent was to small when I printed it, but I made it bigger hopefully its correct.
Topics: pool, filter, stl, thingiverse, jandy, 3D Printing
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Freaky Thing (Freakylein)
data
eye 0
favorite 0
comment 0
My girlfriend and i had the problem that the charcoalfilter inside the Elegoo Mars Pro and Mars 2 Pro was kinda useless. May fit other SLA Printers. Let me know :) !!! Elegoo Mars is not provided due to missing ventilation !!! I decided to design this refillable filter. - There are the following parts: - Filter (SLA or FDM) - Halterung engl. Bracket (FDM TPU) - Deckel engl. Cover (FDM TPU) I highly recommend to print the bracket and the cover in a flexible Material. No supports are needed for...
Topics: Aktivkohlefilter, elegoo_mars_2, filter, reuseable, charcoal, Elegoo_Mars_2_Pro, Machine Tools,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Vladislav Kurashov (walldodge)
data
eye 0
favorite 0
comment 0
I'm a big fan of Mr. Steele and found his foam wedge gopro mounting style to be the best. But I was always afraid that the camera was held down with the strap by the very edge. So, I designed this mount that the contact area with the strap is significantly increased and I have more confidence in mounting my camera. It also provides slight protection for the camera. You can insert a 35x35mm glass ND filter (telesin gopro 9 nd). Mount is designed for 25-30deg camera angle. TBS ND version coming...
Topics: mr_steele, gopro_session_mount, tbs_source_one, sendit, fpv_camera_mount, stl, fpv_nd_filter_mount,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
golan dahan (G4ZO)
data
eye 0
favorite 0
comment 0
There are 3 types of funnels to choose from(8 combinations) * with or without hanging hole * Angle of 35 or 45 degrees * With stripes or without stripes The striped funnel is designed for use with a coffee filter to maximize its efficiency. (I use it to clean the IPA for the resin stuff) The reinforcements around the funnel allow the air to escape from the bottle for quick filling. Wall thickness of 1.6 mm. The model should be turned 180 degrees to print without supports. Minimum recommended...
Topics: clean, Coffee, filter, ipa, resin, stl, thingiverse, Funnel, 3D Printing
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Gary Porter (gp_rocks)
data
eye 0
favorite 0
comment 0
I had some Polar Pro ND filters kicking around from my crashed DJI Phantom 3 Professional. I noticed the opening on my Sony a611 SEL25f18 35mm Prime lens was smaller than the filters so I made this adapter for the lens to hold the Polar Pro ND Filters and Voila! It works! The SEL35f18 is a 49mm lens opening The Polar Pro ND Filters are 31.5mm dia (my opening in the adapter is 32mm)
Topics: PolarPro, sony, polarpro_mount, nd filter adapter, sonya6x00, stl, ndfilter_mount, ND_filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Kag Man (kagman)
data
eye 0
favorite 0
comment 0
***6/26/22 +updated Filter-Cap-Final to Rev2 - increased resolution, fixed symmetrical issues, lowered the 1 1/4" extension length +added Top-Cap-Rev3.stl to plug the top of A or C filter *** This will allow your arctic spa filter casing to be able to use type A or C pool filters. The type A or C filter sides have to be squished into the odd shaped casing, but it still works and save you a fortune on replacement filters. You'll also need to print the Top Cap STL. Without the top filter...
Topics: Sport & Outdoors, intex_pool, Spa_filter, artic_spas, stl, thingiverse, hot_tub_filter, hot_tub
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Ramin Sharifi (Russoxs)
data
eye 0
favorite 0
comment 0
Gravel filter for python aquarium siphon. Designed for 1 in siphon tube. Inner diameter of tube is 25.5 mm and can be scaled to fit other sizes.
Topics: gravel, siphon, filter, Pets, tube, stl, thingiverse, aquarium, fish
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
nate pichler (natepichler)
data
eye 0
favorite 0
comment 0
This is a relatively quick and simple print for a solder fume extractor. This is sized for a standard 120mm fan. The filter will need to be 120mm square. You can get them on amazon (or you can get a larger size and cut it down). No fasteners are required (aside from the bolts included with the fan). You will need to print: 1 Stand 1 Filter holder 2 Feet Optional: rubber feet or weights to keep it from moving around. I have included solid model files if you want to use other size fans.
Topics: filter, fume_extractor, solder_fumes, fumes, stl, solder, Electronics, thingiverse, soldering
Topics: Youtube, video, Autos & Vehicles, FRAM, Fram oil filter, PH6065B, Harley Davidson Oil Filter,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Xiang Yu (hbyuxianghb)
data
eye 0
favorite 0
comment 0
Made for ZWO 2" EFW & Antila 50mm filters(3mm thickness)
Topics: filter, stl, thingiverse, ZWO, 3D Printing
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
wade sutman (Wsutman)
data
eye 0
favorite 0
comment 0
This is just a simple basket to keep your coffee filters in.
Topics: Coffee, Coffee_filter_stand, Kitchen & Dining, stl, Coffee_filter_box, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Matt M (s1ugh34d)
data
eye 0
favorite 0
comment 0
I had a Delta 92mm fan around and decided to design a VOC cartridge filter adapter. Made in tinkercad with various generic models of the filter mechanism and 92mm fan layout.
Topics: 3D Printer Accessories, fan_adapter, P100, air_filter, fan_duct, stl, voc_filter, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
(Toto-42)
data
eye 0
favorite 0
comment 0
This is an add-on for my Bird House Food Refill Funnel: https://www.thingiverse.com/thing:5332962 Since some bird foods contain large raisins that "my" birds don't seem to like much, I designed this "Round Filter with Hexagonal Mesh" to sort them out. The filter is just an inlay for the funnel. It has a knob to easily remove is from the funnel.
Topics: birdhouse, Funnel, filter, Outdoor & Garden, birdfeeders, funnels, stl, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Alex S (wizalex)
data
eye 0
favorite 0
comment 0
This is filter consist from some parts-adapters for different type of telescopes 1. The main part - for SW bkp2001 2. adapter for SW MAK 150 3. Adapter for SW MAK 127 4. Adapter for Celestrone OMNI XLT 127 The Baader Astrosolar foto film is used for this filter. I used film with width 200mm (https://aliexpress.ru/item/10000422985636.html) It's necessary to use printer with big size of hot bed (>250mm)
Topics: telescope, Sport & Outdoors, filter, stl, astrophotography, thingiverse, astronomy_telescope
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
(UrsPB)
data
eye 0
favorite 0
comment 0
# Mac Studio Dust Prevention As the Mac Studio air intake is at the bottom of the device it is inevitable that dust from the desk is sucked into the computer. I experienced this before with several Mac mini machines. The stand I designed is composed of two parts: - Top: Made out of PLA, fits ring structure at the bottom of Mac Studio - Bottom: Made out of TPU A strip of filter fleece (G4) is wrapped around the stand and fixed with masking tape. The open cross section of the stand is greater...
Topics: Mac_Studio, Computer, Mac, stl, thingiverse, dust_filter
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Yurij Tkachenko (Netopsihunter)
data
eye 0
favorite 0
comment 0
Ключ для облегчения откручивания воздушного фильтра Camozzi N108. Wrench to facilitate unscrewing the air filter Camozzi N108.
Topics: air_filter, camozzi, stl, thingiverse, Hand Tools, wrench
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
MIGRO
movies
eye 0
favorite 0
comment 0
https://www.migrolight.com Follow us: Instagram:https://www.instagram.com/migrolight/ Facebook: https://www.facebook.com/MIGROLIGHT/ #migrolight#ledgrowlight#growlights Download the closet grow build manual here: http://bit.ly/2tpoMzL We size the fan and filter for our closet grow and build a high performance , low cost, ventilation setup for our closet grow. To size the fan for your closet grow: Calculate the volume of the grow area (2ftx2ftx6ft = 24 cubic ft) The addition of a filter in the...
Topics: Youtube, video, Science & Technology, Closet grow, Closet grow setup, cabinet grow, cabinet...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Aliasze (Aliasze13)
data
eye 0
favorite 0
comment 0
V1: https://www.thingiverse.com/thing:4094850 V2: https://www.thingiverse.com/thing:4564467 V3: https://www.thingiverse.com/thing:4656971 Version 4: Modification du filtre en trois modèles : _ Simple une mousse _ Simple une mousse avec réservoir 40 mm pour intégrer des billes céramique dans le filtre _ Double à deux mousses 90 degrés avec réservoir 35 mm de long _ Diverse rallonge adaptable à la hauteur désirée de votre aquarium. Version 4: Changed the filter into three models: _...
Topics: nano, aquarium_filter, enhancer, exhauster, mousse, filtre, Pets, stl, air, thingiverse, aquarium
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Andreas Schnepper (DoFuchs)
data
eye 0
favorite 0
comment 0
I was looking for a way to mount ND Filters to my Air Unit Cam in order to get motion blur in my shots. Sadly I found only one (paid) solution which unfortunately left me with dark corners and didn't fit well in my frame anyway. So one led to another and after a few attempts I came up with this solution. It is meant to hold the original (or Chinese mockups) ND Filters that you can get for the Caddx peanut action cam. Those are quite handy and most important small enough to fit. The actual ND...
Topics: dji_air_unit, ND_filter_case, DJI_Cam, dji, stl, ND_filter, Motion_blur, caddx_peanut, thingiverse,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Marty McFly_FPV (MartyMcFlyFly)
data
eye 0
favorite 0
comment 0
Its not perfect but works ;) TPU version is little bit thicker but you can also print the ABS version in 98% size in tpu. mount is for qav-cine 25 freybott edition. TBS Filter Mount can be found here https://www.thingiverse.com/thing:5230340
Topics: gopro_naked, vertical, stl, Horizontal, 3D Printing, thingiverse, namelessrc, tbs_nd_filter, gopro
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
MP001 (MP001)
data
eye 0
favorite 0
comment 0
Key same dimetions as the Hansa key (faucet filter key) cache M16.5 x 2000 59913242. Had to buy loads of these because they get stripped easily. Now I can just print them. If like it you can send me a tip :) https://www.paypal.com/donate/?hosted_button_id=5AAQSEKTFNREE
Topics: hansakey, faucetkey, stl, faucet, thingiverse, filter_key, hansafaucet, Replacement Parts, hansa
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
jake vaa (jakevaa)
data
eye 0
favorite 0
comment 0
Should be a tight fit, no need for glue. Scale it up if it doesnt fit
Topics: coffee_funnel, filter, stl, moccamaster, thingiverse, holder, fix, 3D Printing
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Treyton Winkler (FlusterCluck)
data
eye 0
favorite 0
comment 0
Clamp mount for any 60mm fuel filter or fuel pump The holes in the clamp are designed for an M5 socket head cap screw with a counterbore for the head A ~50mm screw should be adequate for most applications, depending on how thick the surface you are mounting to is
Topics: filter, mount, fuel, stl, thingiverse, pump, Automotive, clamp
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Dustin Bergman (SavageTesla)
data
eye 0
favorite 0
comment 0
Needed some items to make a large pond filter. this is what i made for Bio-Media substrate and will have a buffer pad.
Topics: aquarium_filter, aquaponics, stl, thingiverse, Bio Media, biofilter, Outdoor & Garden
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
hugo Letessier (huolet)
data
eye 0
favorite 0
comment 0
Just create an exhaust pipe connector for the HEPA filter from thing 4866684. Fit for 70mm inner pipe.
Topics: 80mm, 3D Printer Accessories, dust_collector, enclosure, Ventilation, HEPA_filter, stl, air,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
houston yates (Hyates21)
data
eye 0
favorite 0
comment 0
This is a vacuum rake i designed to help clean all the junk out of the gravel in aquariums when doing water changes or other tank maintenance, goes on a 1/2" hose (13mm)
Topics: gravel, python, siphon, vacuum, aquarium_filter, Cleaning_tools, Pets, stl, thingiverse, algae,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Andre Andre (lightdream)
data
eye 0
favorite 0
comment 0
Air-Filter Resin Printer Anicubic Mono X Other components: Filter mat (universal micro filter cotton) Activated charcoal (granulated activated charcoal) Cooling Fan (Ronyaoko 5V 0.25A 80mm 80x10mm 8cm Brushless DC USB Connector) The filter container is filled with a filter mat, then the activated carbon and finally with another filter mat.
Topics: Anicubic, 3D Printer Accessories, anycubic_mono_x, photon_mono_x, Photon, mono_x, air_filter, stl,...
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
jan baas (jgabaas)
data
eye 0
favorite 0
comment 0
For my enclosure I designed a filter that fits a roomba 800/9 hepa filter. This filter is cheap and easy to buy. Above and below I have done activated carbon. It is in my enclosure with my Kywoo max. Hence the color choice. The kywoo logo can be easily removed. The design is inspired by other filter designs. I use an axial fan with a 4 pin connection. This makes it easy to regulate the speed. I am especially inspired by this design, https://www.thingiverse.com/thing:3453788
Topics: 3D Printer Accessories, Carbon, hepa 800, stl, Kywoo_Max, thingiverse, enclosure filter
0
0.0
Aug 14, 2022
08/22
Aug 14, 2022
by
Alberto Ramirez (Paranthropus_Boisei)
data
eye 0
favorite 0
comment 0
Oil Filter wrench for Ford FL910S Oil Filter. Attach to a 3/8 ratchet. Printed with Inland PLA+. I chose 80% infill, but if you feel you want to use less by all means go right ahead. Use any infill shape setting you see fit. Enjoy!! :)
Topics: Oil Filter, Tool, stl, Wrench, Ford Fiesta, thingiverse, Automotive, FL910S, Ford
