2
2.0
Mar 25, 2021
03/21
by
duke vah (duke_vah)
data
eye 2
favorite 0
comment 0
This is a mount for 19x19 cameras. The distance between the standoff is 32mm. I have created this for HSKRC XL7 and should work for others (e.g, iFlight XL7).
Topics: stl, fpv, fpv_camera_holder, fpv_camera_mount, thingiverse, Hobby, micro_FPV_camera, XL7
9
9.0
Apr 30, 2021
04/21
by
Chris Mayhew (ChrisMayhew)
data
eye 9
favorite 0
comment 0
I found that the original mount included didn't quite work with my camera (Wouldn't allow me to focus properly) so I modified the original mount so it was slightly thinner and allowed me to set the focus easily. The camera I am using is https://www.amazon.co.uk/gp/product/B01HO7R5MW/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Topics: stl, fpv_camera, Electronics, fpv, fpv_camera_mount, thingiverse
4
4.0
Mar 18, 2021
03/21
by
Srecko Menjic (teshko)
data
eye 4
favorite 0
comment 0
TBS Source One v0.2 GoPro Session mount ==================== 30 deg TPU GoPro session mount with no TPU in view. It supports TBS glass ND filter in front of the camera. Print with infil 20% and 0.6-0.8 walls. Here is the design file you can modify [OnShape] I will from time to time update the design. 2019-05-21 Added modified design that provides better protection to ND filter and supports ND16 filter. [OnShape]:...
Topics: fpv_camera, fpvfreestyle, fpv_camera_protection, fpv, stl, thingiverse, fpv_camera_mount, R/C...
5
5.0
Jan 21, 2021
01/21
by
Damian Kobler (Dakofpv)
data
eye 5
favorite 0
comment 0
This is a fpv mount for the gopro session cameras. Special about this particular one is that it can be printed out of PLA material. it has a perfect fit and the strap that holds down the camera is connected to the mount itself so you will never lose your camera again. https://www.youtube.com/watch?v=jAGJ_MN0qQM
Topics: fpv, thingiverse, fpv_camera, fpv_camera_mount, Hobby, stl
8
8.0
Jun 11, 2021
06/21
by
(Hotwire)
data
eye 8
favorite 0
comment 0
Summary FPV Camera Cube is a box for your standard FPV camera (32mm x 32mm) and VTx. Fits most FPV board cameras and allows you to own only one camera/VTx for all your drones. I have a couple of these one pictured the VTx is on the outside because the LEDs indicating the channel needed to be visible and the channel button accessible. The alternate back is for this kind of VTx and goes inside the cube shell. VTx inside is preferable as it keeps moister of the Tx board. This is a very simple...
Topics: fpv_racing, thingiverse, fpv_camera, fpv_camera_mount, stl
8
8.0
Jan 11, 2021
01/21
by
Eric Christensen (IMMario2)
data
eye 8
favorite 0
comment 0
This is a case for the Hobbyking VM275T fpv Camera. it hold it and protects it. you can also use it as a mount as it is easy to remove the Camera.
Topics: thingiverse, Hobbyking VM275T, Hobby, stl, fpv_case, fpv camera case, fpv, fpv_camera,...
0
0.0
Apr 19, 2022
04/22
by
Cordale Daniels (cee_fpv)
data
eye 0
favorite 0
comment 0
I wanted a camera mount for my camera that was level with the quad so i made this, No print made yet.
Topics: fpv, thingiverse, stl, fpv_camera, Other, fpv_camera_mount
7
7.0
Jan 18, 2021
01/21
by
Tomasz Czajka (Czayen)
data
eye 7
favorite 0
comment 0
Here is a simple bracket for the LST - S2 5.8G 800TVL HD Micro CMOS FPV Camera from Gearbest. By the way a really good and cheap all in one FPV micro camera! (you can buy it here: https://www.gearbest.com/camera/pp_666807.html?vip=305295)
Topics: fpv, fpv camera, FPV_Camera_Holder, thingiverse, micro quadcopter, fpv camera mount, R/C Vehicles,...
5
5.0
Mar 4, 2021
03/21
by
Jeff Smith (googlecar)
data
eye 5
favorite 0
comment 0
case to protect wolf whoop wt03 fpv camera
Topics: fpv_camera_mount, fpv_camera, thingiverse, R/C Vehicles, stl
9
9.0
Jan 12, 2021
01/21
by
Sascha Schulz (Slash125)
data
eye 9
favorite 0
comment 0
English: Camera Case für Eachine AIO MC01 i create this Case for the Pan & Tilt Mounts from Aliexpress. For the new Versions of the Camera you may costumize it for your Camera. For the Dimensions and printer settings look in the pictures. Deutsch: AIO Kamera von Eachine MC01 Kameragehäuse für Pan & Tilt Mounts von Aliexpress. Für die neueren AIO Kameras muss man das Gehäuse anpassen. Abmessungen und Druckereinstellungen sind bei den Bilder zu sehen.
Topics: R/C Vehicles, thingiverse, stl, fpv_camera, fpv_camera_mount
2
2.0
Apr 5, 2021
04/21
by
Petter Kværnum (Masambi)
data
eye 2
favorite 0
comment 0
This is a small angle to measure your tilt on the fpv cam. Nice to have with you in the field or at practice. Long lines are 10 degrees short once are 5 degrees. I just used a white marker to highlight the angles.
Topics: thingiverse, fpv camera, fpv camera tilt, tilt, fpv, stl, Hobby
2
2.0
Jun 11, 2021
06/21
by
Ricardo Gonzalez Ramos (RicciRicgon)
data
eye 2
favorite 0
comment 0
Printed in PLA with Standard Setting: 210 deg. C Extruder 60 deg. C Bed temperature.
Topics: kinetic, thingiverse, fpv_camera, fpv_camera_mount, 3D Printing, stl
2
2.0
Mar 26, 2021
03/21
by
Paul Beiswenger (InventerPaul)
data
eye 2
favorite 0
comment 0
The WOLFWOOP WD03 and WT03 are my go to fpv camera/vtx combo on drones that I do not require OSD (on screen display.) Just give it 5v and ground, and you have FPV on anything you want! I made this mounting/ protective case to fit a specific make on here; link https://www.thingiverse.com/thing:2748985 but I have used it on several drones since. The mounting holes are 2 mm in diameter, 31.5 mm apart, and its height is about 17.74mm. This is a 0° angle offset mount, so if you like to fly fast on...
Topics: stl, fpv_camera_mount, thingiverse, FPV camera, Wolfwoop, 3D Printing
2
2.0
Mar 13, 2021
03/21
by
Henry Chung (pathfinderzero)
data
eye 2
favorite 0
comment 0
FPV camera mount with tripod hole to mount a regular size or micro FPV camera to a tripod.
Topics: thingiverse, fpv camera, Camera, tripod hole, stl, fpv camera tripod
7
7.0
Jun 20, 2021
06/21
by
Dmitry Rechkin (FlexRC)
data
eye 7
favorite 0
comment 0
Front FPV Mini Camera mount for Pico X Racing Drone lets you have awesome narrow profile Pico X build, which is easy to carry around and more resistant to crashes. It works great for Tiny FPV Kit
Topics: fpv_camera_mount, thingiverse, flexrc, fpv_camera, DIY, stl, fpv
2
2.0
Mar 25, 2021
03/21
by
Sebastian Schutte (asap23)
data
eye 2
favorite 0
comment 0
This is a highly customizable mount for FPV cameras for multicopters. The basic idea is that almost any FPV cam can be mounted to any frame, given a few parameters. These parameters need to be measured and then set in the openscad script. The resulting mount has to be mirrored and can be 3d printed.
Topics: stl, fpv, R/C Vehicles, fpv_camera_mount, thingiverse, fpv_camera
4
4.0
Mar 17, 2021
03/21
by
Clément Strauss (cstrauss)
data
eye 4
favorite 0
comment 0
This a camera mount for the "Upgraded VTX20 800TVL HD Micro CMOS FPV Camera" Available here : [vtx20 at banggood](https://www.banggood.com/custlink/Kvv3EYeRkN) The camera is held in place by an O-ring or a ziptie The back wall has an hole for the power cable to be glued in. Antenna can be attach to the little pillar on the back. Lens cap can still be used and is easy to remove.
Topics: fpv_camera, fpv, stl, thingiverse, fpv_camera_mount, R/C Vehicles
8
8.0
Mar 21, 2021
03/21
by
Brian Matthew (BrianMatthew)
data
eye 8
favorite 0
comment 0
A nice simple 22degree camera mount, takes FatShark Pilot cams, HS1177 and PZ cameras in their cases, uses a O'ring to hold it in place and recommend a small piece of double sided tape for dampening. Due to the coarseness of the 3d printed surface the ring won't slide, plus because of its structure wrapped in such a way it locks it's self in quiet nicely... special thanks to my buddy Jeff, for the idea of the o-ring. After many successes with the design it would still pop off the frames with...
Topics: stl, fpv_camera_mount, FPV, R/C Vehicles, thingiverse, FPV camera
6
6.0
Apr 18, 2021
04/21
by
Guillermo Moguel (chipocrudos)
data
eye 6
favorite 0
comment 0
nuts and bolts M3
Topics: thingiverse, stl, fpv, fpv_camera, R/C Vehicles, fpv_camera_mount
3
3.0
Mar 5, 2021
03/21
by
Oleg Millis (IStarknight)
data
eye 3
favorite 0
comment 0
case for fpv camera (camera size is 4x4 cm) i made it for S500 frame quadcopter.
Topics: stl, R/C Vehicles, fpv, fpv_camera, fpv_camera_mount, thingiverse
3
3.0
Jan 7, 2021
01/21
by
Baptiste Rébillard (Rubiskow)
data
eye 3
favorite 0
comment 0
[EN]Support is required on rails This thing is for this camera : https://fr.banggood.com/Eachine-TX04-PAL-Super-Mini-Light-AIO-5_8G-40CH-25MW-VTX-700TVL-120-Wide-Angle-FPV-Camera-p-1166418.html?rmmds=search&cur_warehouse=USA [FR]Les support sont requis pour les rails Cette pièce est conçu pour cette caméra : https://fr.banggood.com/Eachine-TX04-PAL-Super-Mini-Light-AIO-5_8G-40CH-25MW-VTX-700TVL-120-Wide-Angle-FPV-Camera-p-1166418.html?rmmds=search&cur_warehouse=USA
Topics: R/C Vehicles, fpv_camera, stl, thingiverse, fpv, fpv_camera_mount
1
1.0
Apr 19, 2022
04/22
by
Alex Alle (AlexAlle)
data
eye 1
favorite 0
comment 0
kit for Amaxinno 5 F5S
Topics: thingiverse, AMAXinno, stl, fpv_camera, R/C Vehicles, fpv_camera_mount
1
1.0
Jul 22, 2021
07/21
by
Haensse (haensse)
data
eye 1
favorite 0
comment 0
Amewi 1:10 truck camera holder plattform. Instead of splint on the front, just use a paper clip and bend it open. Glue camera mount on the plattform and damp it with some foam under the plattform.
Topics: fpv_camera, stl, R/C Vehicles, fpv_camera_mount, Amewi, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Alan Ball (FlyingRobotZA)
data
eye 6
favorite 0
comment 0
Frame for a mini FPV camera (shown on Turbo SDR 2) to fit standard size FPV camera mounts.
Topics: fpv, Electronics, thingiverse, fpv_racing, fpv_camera, fpv_camera_mount, fpv_racer, stl,...
2
2.0
Jan 7, 2021
01/21
by
Sebastian Merz (SebastianMerz)
data
eye 2
favorite 0
comment 0
Designed a little canopy for the "eachine tyro69" kit. It fits a Caddix Turbo EOS2 and the vtx which is included in the kit.
Topics: R/C Vehicles, fpv_camera, stl, thingiverse, fpv, fpv_camera_mount
7
7.0
Apr 16, 2021
04/21
by
Robert Hunter (bobh9286)
data
eye 7
favorite 0
comment 0
Remix to mount a Runcam on QAV R
Topics: thingiverse, stl, fpv, fpv_camera, R/C Vehicles, fpv_camera_mount
7
7.0
Apr 17, 2021
04/21
by
Gandalff fpv (Gandalffpv)
data
eye 7
favorite 0
comment 0
Camera mount ( 0°) for Hobbyking microcam type SKU867000002-0.
Topics: thingiverse, stl, fpv, fpv_camera, R/C Vehicles, fpv_camera_mount
4
4.0
Mar 17, 2021
03/21
by
Kyu You (kyubot)
data
eye 4
favorite 0
comment 0
Caddx turtle camera module is shipped with bare PCB and is vulnerable to foreign objects. So I made this board mount and cover for the camera module so slim and light weight suitable for racing drone especially if it has mounting holes. Camera mount can hold the camera module and its tilt angle can be adjusted by user.
Topics: fpv_camera, caddx_turtle, stl, thingiverse, caddx, fpv_camera_mount, DIY
1
1.0
Oct 26, 2021
10/21
by
Edison Ong (Edison13)
data
eye 1
favorite 0
comment 0
This belt is design to keep the cam and connector strapped together with the "Stock Plastic case" Designed for TPU filament. in my print. it fits nice, adjust +-0.2 to +-0.5 How to use: place peanut inside case, then position belt, then insert connector //***** Edison FPV main for any file request, visit our fpv page https://www.facebook.com/EdisonFPV //**** If you like what you see here, you can help by giving support or just by sharing :D so we can reach those who can support this...
Topics: Camera, fpv_camera, drone, camera_mount, stl, fpv_camera_mount, thingiverse
7
7.0
Jan 16, 2021
01/21
by
Patric Roger (patric123)
data
eye 7
favorite 0
comment 0
Installing a YI camera support on a quadcopter CG035 (slide) The two pieces are to be pasted with ABS paste.
Topics: thingiverse, fpv_camera, Quadcopter, fpv_camera_mount, R/C Vehicles, stl
2
2.0
Mar 18, 2021
03/21
by
Wim Wendler (wimson)
data
eye 2
favorite 0
comment 0
TBS Source One Micro Cam Adapter for 20mmx5mm and 20mmx6mm standoffs
Topics: fpv_camera_mount, R/C Vehicles, fpv_camera, stl, thingiverse, sourceone
7
7.0
Mar 12, 2021
03/21
by
William Adkins (WA4KMA)
data
eye 7
favorite 0
comment 0
This backpack can house the Micro FPV Camera and a small one cell Lipo Battery. Put HD Velcro on it and move it from plane to plane or quad to quad.
Topics: fpv_camera_mount, thingiverse, R/C Vehicles, stl, fpv, fpv_camera
2
2.0
May 1, 2021
05/21
by
Dmytro Pashko (redtroll)
data
eye 2
favorite 0
comment 0
Topics: stl, fpv_camera, CADDX, fpv_camera_mount, thingiverse, R/C Vehicles
8
8.0
Jun 10, 2021
06/21
by
Dmitry Rechkin (FlexRC)
data
eye 8
favorite 0
comment 0
This adjustable universal FPV camera mount is perfect for FlexRC Pico X and can be installed on top of PIKOBLX flight controller and works as top lid. FlexRC Pico X frame: https://flexrc.com/product/pico-x-frame/ Adjustable camera mount: https://flexrc.com/product/top-lid-with-adjustable-camera-mount/
Topics: fpv, flexrc, pico_x, thingiverse, fpv_camera, fpv_camera_mount, DIY, stl
9
9.0
Jan 11, 2021
01/21
by
Gandalff fpv (Gandalffpv)
data
eye 9
favorite 0
comment 0
To place the microcam type SKU 867000002-0 from Hobbyking On your favorite microdrone. Fixed 12° angle.
Topics: R/C Vehicles, thingiverse, stl, micro_fpv_camera, fpv, fpv_camera_mount
6
6.0
Apr 17, 2021
04/21
by
Matthew Earle (automattic)
data
eye 6
favorite 0
comment 0
This has been modified for the 1.8mm Foxeer lens. Used specifically on my Monster v2 . lens is 18mm wide and 3.75mm diameter. Print in TPU or other flexible material
Topics: fpv_camera_protection, thingiverse, Toys & Games, stl, fpv_camera, drone, camera_protection
4
4.0
Mar 3, 2021
03/21
by
Srecko Menjic (teshko)
data
eye 4
favorite 0
comment 0
iFlight XL5 V2 GoPro Session mount ==================== 30 deg TPU GoPro session mount with no TPU in view. It may fit V3 but I can't confirm this yet (it doesn't fit V1). It supports TBS glass ND filter in front of the camera. Here is the design file you can modify [OnShape] I will from time to time update the designs. 2019-08-08 - Added updated design that supports ND16 and features bumpers for additional protection. Also added 20deg mount [OnShape]:...
Topics: fpv_camera_mount, fpv, fpv_camera, fpvfreestyle, thingiverse, R/C Vehicles, stl
2
2.0
Mar 26, 2021
03/21
by
fire blood (yo8aiv)
data
eye 2
favorite 0
comment 0
made a 26mm fpv camera to help me design some mounts.
Topics: stl, R/C Vehicles, fpv_camera_mount, thingiverse, 26 mm, fpv_camera
2
2.0
Mar 26, 2021
03/21
by
Green Racoon (AzSaSiN)
data
eye 2
favorite 0
comment 0
SLA Printer Elegoo Mars Camera mount and led\buzzer frame mount **Frame:** [Pipi Shrimp Mini XS5 220 220mm Carbon Fiber Quadcopter Frame Kit w/ 4mm arm](https://www.amazon.com/Pelusa-220mm-Wheelbase-Carbon-Racing/dp/B0797NSDKB/ref=sr_1_2?keywords=xs+5+220&qid=1574275694&s=toys-and-games&sr=1-2) **Camera:** **Buzzer/LED:** [Drone LED with Buzzer HGLRC 5V LED...
Topics: stl, mount, drone, fpv_camera_mount, thingiverse, camera_mount, Hobby, fpv_camera
1
1.0
Dec 1, 2021
12/21
by
Jannis (Jannis306)
data
eye 1
favorite 0
comment 0
Cam mount for foxeer pico cam
Topics: fpv_camera_mount, thingiverse, fpv, stl, Foxeer, R/C Vehicles, fpv_camera
6
6.0
Jan 21, 2021
01/21
by
ivan post (ivanpost)
data
eye 6
favorite 0
comment 0
Use this variants to easily mount your LEGO Ultrasonic or (and) fpv-camera Use PET-G or ABS filament Need a 4.8 " diameter drill bit for good compatibility with LEGO parts
Topics: HC-SR04, LEGO, Ultrasonic, thingiverse, fpv_camera, fpv_camera_mount, Robotics, stl
4
4.0
Mar 3, 2021
03/21
by
Srecko Menjic (teshko)
data
eye 4
favorite 0
comment 0
TBS Source One v0.11 GoPro Session mount ==================== 30 deg TPU GoPro session mount with no TPU in view. It supports TBS glass ND filter in front of the camera. Here is the design file you can modify [OnShape] I will from time to time update the design. [OnShape]: https://cad.onshape.com/documents/a68ec54705c0041af813e62c/w/b19ab44f4a7aa38cfa1c664a/e/29894cc5bc6d208b6dc52132 "OnShape"
Topics: fpv_camera_mount, fpv, fpv_camera, fpvfreestyle, thingiverse, R/C Vehicles, stl
1
1.0
Oct 29, 2021
10/21
by
Luka Müller (Radian2)
data
eye 1
favorite 0
comment 0
30° Camera Mount for normal sized cameras in the ZMR frame
Topics: thingiverse, camera_mount, fpv_camera, R/C Vehicles, stl, fpv_camera_mount
4
4.0
Mar 3, 2021
03/21
by
Srecko Menjic (teshko)
data
eye 4
favorite 0
comment 0
FlosStyle GoPro Session mount ==================== 30 deg TPU GoPro session mount with no TPU in view, and almost no props. I didn't print this one, the thick part is spungy, so I suppose infill is on the low side, 20%. Short video capture demo on [YouTube] and [Imgur] Here is the design file you can modify [OnShape] I will from time to time update the design. [YouTube]: https://youtu.be/w6QcCM1y9Ss "YouTube Video" [Imgur]: https://imgur.com/gallery/ODlak8B [OnShape]:...
Topics: fpv_camera_mount, fpv, fpv_camera, fpvfreestyle, thingiverse, R/C Vehicles, stl
4
4.0
Apr 20, 2021
04/21
by
Srecko Menjic (teshko)
data
eye 4
favorite 0
comment 0
Armattan ChameleonTi/Rooster GoPro Session mount ==================== 30/25 deg (-5/-10 deg absolute) TPU GoPro session mount with no TPU in view. It supports TBS glass ND filter in front of the camera. Here is the design file you can modify [OnShape] I will from time to time update the design. 2019-03-09: I added holes to the "thick" part to improve rigidity. I printed with 20% infill, and layers were detached on harder crash. I also added 25 deg mount. 2019-04-25: Modified mount to...
Topics: thingiverse, stl, R/C Vehicles, fpv, fpvfreestyle, fpv_camera_mount, fpv_camera
5
5.0
Mar 16, 2021
03/21
by
Lap Hin Leslie Chan (leslie735713)
data
eye 5
favorite 0
comment 0
Paint with TPU!
Topics: fpv_camera, fpv, Insta360_One, Camera, stl, thingiverse, fpv_camera_mount, insta360
2
2.0
Apr 4, 2021
04/21
by
Josh Britton (jbritton)
data
eye 2
favorite 0
comment 0
Simple adapter to fit a 14mm camera into a 19mm space. This was designed for the Caddex Turbo EOS1, but may fit other similar sized cameras.
Topics: thingiverse, R/C Vehicles, fpv_camera_mount, stl, nano_fpv, fpv_camera
7
7.0
Apr 22, 2021
04/21
by
Antonio Cheong (WindoAC)
data
eye 7
favorite 0
comment 0
Camera Mount for Full 3D Print Y6 HexaCopter Flame
Topics: fpv_camera_mount, fpv_camera, stl, R/C Vehicles, thingiverse, camera_mount
7
7.0
Apr 17, 2021
04/21
by
Pedro Azevedo (pedroamz)
data
eye 7
favorite 0
comment 0
Camera Mount CCD FPV for Quad 250 Racer PLA Infill 50%
Topics: thingiverse, stl, fpv_camera, R/C Vehicles, fpv_racer, fpv_camera_mount
4
4.0
Mar 9, 2021
03/21
by
Martijn Dekker (leunis)
data
eye 4
favorite 0
comment 0
I like this camera: https://www.banggood.com/custlink/m3m3ClO1k8 because they are cheap and still very reliable. I do sugget to change the lens to an gopro style lens like this one: https://www.banggood.com/custlink/vGvGCOouUV This combo make a great fpv camera for a good price! The camera fits this mount exactly. Don't use glue It will not get loose. The holes fits a lisam 210 frame.
Topics: fpv_camera_mount, R/C Vehicles, stl, thingiverse, fpv_camera, drone_racing
