3
3.0
-
-
-
by
Charles Kaup (Aquahawk)
data
eye 3
favorite 0
comment 0
A simple dice box I made to use for myself that's both large enough to hold all the dice needed for a character, and has a rolling tray built in. One lid has a D20 embossed on it if you'd like. There's also enough vertical clearance to put foam in both sides and still be able to fit dice in it.
Topics: thingiverse, stl, tabletop_gaming, dice, dice_tray, Games, gaming_dice, D&D, dice_box
14
14
-
-
-
by
Abra Chaney (SwankyDaffodil)
data
eye 14
favorite 0
comment 0
This is a standard set of sharp-edged dice masters for use in making silicone dice molds. This is an STL file pack that comes with an STL file for each individual die, as well as a pre-supported chitubox file with one d4, d6, d8, d10, d12, d100 and two d20s. All pre-supported files have been tested using an Elegoo Mars 2 Pro and have been found to print satisfactorily. FDM printers are not recommended for printing dice masters. Support removal is recommended to be done before curing under a UV...
Topics: D20, dungeons_and_dragons, dice, TTRPG, gaming_dice, dnd_prop, tabletop_rpg, RPG, thingiverse, dnd,...
4
4.0
-
-
-
by
SuperClam (SuperClam)
data
eye 4
favorite 0
comment 0
Holy Eight Sided Die With Lots of Holes or Just 1 - 4 X2 (Sides add up to 7 or 11 all opposite sides equal 9) Center sphere inside for that handy metal ball to roll around it if you like, or anything else for that matter. 1.16 across the middle. Size up as large as you like.
Topics: gaming_dice, gaming, Dice, stl, dice, thingiverse
12
12
-
-
-
by
Todd Olsen (ASLLEXICON)
data
eye 12
favorite 0
comment 0
Ancient Tower of Hercules prior to reconstruction; turned into a dice tower, with a LED campfire signal light wired in. Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Visit my website: https://StarLabs3D.com My YouTube: https://www.youtube.com/c/ToddOlsen Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Brave Browser referral:...
Topics: dungeon_tiles, Tabletop_Game, RPG_Prop, D20_Dice, Castle dice, tabletop_terrain, Castle dice tower,...
6
6.0
-
-
-
by
Michael Riedmueller (MrParadox224)
data
eye 6
favorite 0
comment 0
A friend of mine asked me to tackle the idea of making a dice tower that collapsed down and fit in a box. After a few weeks for printing and testing I finally finished my design. I designed the openings to always be about 30mm between flaps and the final opening at the bottom. This allowed my MTG life counter dice (the biggest dice I own) to fall through without any issues. The tower is made up of 4 walls, 3 of the flaps, and 6 flap supports. The "p3" and "p4" walls stand...
Topics: container, stl, boardgames, collapsible, Dice, dnd, dice, Dice tower, gaming_dice, dice_box,...
6
6.0
-
-
-
by
cosimo annese (mino1970)
data
eye 6
favorite 0
comment 0
A well-made printer doesn't need to be calibrated, so I prefer to talk about "test" instead "calibration". This dice will allow you to test your printer and, at the same time, create a useful object. You can choose from classic dice and keyring version.
Topics: gaming_dice, stl, thingiverse, calibration, 3D Printing Tests
2
2.0
-
-
-
by
Brett Bilbrey (Bilbrey)
data
eye 2
favorite 0
comment 0
Just a simple take on a version of modern dice... Or perhaps 'alien dice'.
Topics: stl, gaming_dice, thingiverse, Dice
4
4.0
-
-
-
by
Nawar Awad (Nori0aw)
data
eye 4
favorite 0
comment 0
A project using arduino nano based on the retro memory game "Simon". Features: - Illuminated buttons - OLED Display will show the level and useful messages - Best score is saved on the EEPROM - Retro sounds Hardware: - Arduino Nano - Speaker - OLED Display 128x64 - 18650 battery - Battery holder (you can print one) - DC to DC Step Up Converter - 4x Illuminated buttons For Arcade - Prototype PCB - on off switch Code: https://github.com/nori0aw/MemoryGame
Topics: retro_arcade, simon, thingiverse, gaming, memory, retro, Retrogaming, arcade, games, Games,...
2
2.0
-
-
-
by
W Herman (th3k1ng)
data
eye 2
favorite 0
comment 0
7 Piece dice set with D&D ampersand logo for highest roll. Sharp corners and different sizes for some dice. Please post your makes, let's see what these look like! CURRENTLY HAS AN ISSUE WITH D20 HAVING TWO 3'S AND NO 7. WILL BE POSTING UPDATED FILES ASAP.
Topics: dungeon_dnd, D20_Dice, thingiverse, D12, D12_Dice, dnd_prop, D20, D8_dice, dice set, dungeons,...
3
3.0
-
-
-
by
Steven Goldsborough (TXtubation)
data
eye 3
favorite 0
comment 0
This is a remix of GPPK's very nice D&D inspired Dice Holder (minus the D&D). I had a dice cup like this many, many moons ago, and figured I could use a new one for my first foray into Pocket-Dungeons by dutchmogul , to go along with some small custom dice I intend to use. The original was quite large (100x100x100mm) for my little printer, so I scaled it down to 70% its original size when I printed it. The files included here are still the original size so you can scale as you like.
Topics: stl, dice_cup, Dice, dice_box, thingiverse, gaming_dice, cup, dice
5
5.0
-
-
-
by
Berko Bourke (Berko)
data
eye 5
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kK0Kir0RMW3 Hey All! Castle Portal (or whatever you want to use it for) Everything is designed to be printed flat, no needing supports Steps - the brickwork panels are located around each step box. (see pic above for reference) 1. Glue the sides evenly first, all edges of brickwork should be flush to the stepbox. 2. Glue the top brickwork to the stepbox, the back should be flush with a lip at the front. 3. Glue...
Topics: stl, gaming_dice, portal, wargaming_terrain, dnd_miniature, dnd, dungeonsanddragons, thingiverse,...
7
7.0
-
-
-
by
lee sarginson (sarginson84)
data
eye 7
favorite 0
comment 0
11 sided dice
Topics: Dice, stl, gaming_dice, thingiverse
4
4.0
-
-
-
by
Rick Tress (ricktress)
data
eye 4
favorite 0
comment 0
RPG Dice - Population / Settlement A custom population / settlement size dice for tabletop games. 25mm with 2mm radius edges. (for 18mm use 72% scale, for 16mm use 64% scale) Each face is based on standard map icons and shows: -camp (triangle tent) -fort (parapets) -hamlet (house) -village (dot) -town (dot with ring) -city (dot with sun ring) License: Creative Commons, Attribution, Non-Commercial, No Derivatives, All-Rights-Reserved Like what you see? Consider donating! PayPal.Me/ricktress
Topics: Toy & Game Accessories, gaming_dice, thingiverse, dice, special, stl, settlement,...
12
12
data
eye 12
favorite 0
comment 0
This is the second version of my dice tray system. The trays lock into two positions, closed and open. **open** The trays lock side to side for quick access to dice. **closed** The trays lock vertically for storage.
Topics: thingiverse, Dice, stl, gaming_dice, dice_box, dice_tray, dice
4
4.0
-
-
-
by
Kim Bourrie (Kimbolt)
data
eye 4
favorite 0
comment 0
Coming March 1st to Kickstarter! Fates End 2: Terra & Cosmos! https://www.kickstarter.com/projects/kimbolt/fatesend2-terra-and-cosmos Dice Towers & More! >>>> Join us! 15 high res, SUPPORT FREE models for $38! • 5 Sci-Fi-Inspired Dice Towers • 5 Earth-Inspired Dice Towers • 5 Dice Jails/vaults • & 1 GM Screen The Mayan Temple Dice Tower is a FREE file from this campaign. Filenaming: Mayan_DT_v# = Full Mayan Temple Dice Tower Mayan_DT2_Top_v# = 2 part, top (split...
Topics: thingiverse, dice_tray, Toy & Game Accessories, dice_box, roll, Mayan_Temple, wargaming,...
3
3.0
data
eye 3
favorite 0
comment 0
This is a die for the Too Fat Lardies What A Tanker! https://toofatlardies.co.uk/product/what-a-tanker-rules/ World War 2 Tank wargame. It is standard six sided die where the numbers for the faces have been replaced with the in-game actions: -Drive -Acquire -Aim -Reload -Shoot -Wild
Topics: WW2_tank, too_fat_lardies, gaming_dice, world_war_2, World_War_Two, thingiverse, wargaming, Dice,...
2
2.0
-
-
-
by
Joel Leavelle (joelwinsagain)
data
eye 2
favorite 0
comment 0
12 GA D6 modeled in Fusion360 for Shadowrun, the brass is a simple revolved shape, and the hull was created with a loft from a circle to a filleted polygon. It rolls well on every surface I've tried, but a little too well on hard smooth surfaces, I prefer it on felt or even a mousepad, so it rolls well but not too far, but I may make a version with sharper corners at some point. I printed mine with eSun PLA pro at .16mm layers, 20% infill and 4 walls
Topics: dice, thingiverse, D6_dice, Dice, gaming_dice, stl, shadowrun, 1d6
2
2.0
-
-
-
by
liam swayze (Swayze2020)
data
eye 2
favorite 0
comment 0
+1 dice, Used in a potion Dice roller
Topics: dice, RPG, thingiverse, dnd, Dice, gaming_dice, stl, miniature
3
3.0
-
-
-
by
John Pierson (totallynotaspoon)
data
eye 3
favorite 0
comment 0
D6 master mold for resin castings
Topics: D6_dice, gaming_dice, thousand_sons, dice_box, thingiverse, Dice, horus_heresy, warhammer_40k,...
3
3.0
-
-
-
by
Luke Johnson (lcjjohnson)
data
eye 3
favorite 0
comment 0
all purpose dice
Topics: gaming_dice, game, die, game pieces, thingiverse, 3D Printing, dice, stl
8
8.0
-
-
-
by
Filip Lorin (Filip_Lorin)
data
eye 8
favorite 0
comment 0
Print with 3 shells and 40% infill for a balenced die.
Topics: dice, gaming_dice, fudge, thingiverse, fudge_dice, Dice, tabletop_gaming, stl, fate
4
4.0
-
-
-
by
Snuups Bernhardiner (Snuups)
data
eye 4
favorite 0
comment 0
This is the Dice Tower Garden in a shorter version for a better fit on the table. It is a version of this one: https://www.thingiverse.com/thing:2831101 to be added to this https://www.thingiverse.com/thing:751718 what is the dice tower it self which is not designed by me. Have fun and play with joy. The luck will be with you.
Topics: gaming_dice, dice, toy, SettlersOfCatan, toys, Settlers, dice_tower, RPG, tabletop, Dice, fantasy,...
4
4.0
-
-
-
by
Joe Not Enough Filament (JoeLajoe)
data
eye 4
favorite 0
comment 0
I host a monthly game night and the girlfriend wanted something on the table as a centerpiece so I made this. It's printing right now and will have pictures of it once the plant has been planted.
Topics: dnd, dungeons_and_dragons, dungeon_dnd, planter, D20_Dice, gaming_dice, stl, thingiverse, plants,...
4
4.0
-
-
-
by
Berko Bourke (Berko)
data
eye 4
favorite 0
comment 0
ITS BIGGER, IT HOLDS MORE DICE, ITS VERSION 7!!! This Version Mods...! - Holds 8 sets of 7 dice Comfortably!!! (cause we need more dice dammit!) - Holds 4 Mins (25.4mm bases)!!! - The Pencil area has been moved to a slide draw with magnets to the side of the box!!! - The Tablet Stand has a Attachment for a portable Battery Charger!!! Machine and Printing Settings: Machine: Cocoon Create Touch (Wanhao I3 Plus) - 200x200x180mm (you will need a bed of at least 200X200mm to print this!!!) Amount of...
Topics: 28mm, cosplay_prop, 25mm_Bases, dnd_prop, DnD_Tiles, gaming_dice, dice, gearbox, dice_tower,...
6
6.0
-
-
-
by
Andrew Howard (StafDehat)
data
eye 6
favorite 0
comment 0
I'm DM'ing a game of Pathfinder for a bunch of beginners, and a couple of 'em have a hard time telling a d10 from a d12. Solved that issue with this dice tray. One of my players is a halfling rogue, so her daggers do 1d3 - that makes d3 a rather common die at our table, so I designed this with a d3 slot. I realize that's uncommon though, so included a tray with no d3 slot as well.
Topics: gaming_dice, D&D, thingiverse, Pathfinder, dice_tray, Dice, stl
10
10.0
-
-
-
by
Aidan Wilson (aewm96)
data
eye 10
favorite 0
comment 0
Due to falling in love with Critical Role I've created this dice box that can house D&D dice. It's very similar to the first one I made but has a lot more in the way of tolerances. I've also changed the sword slightly because I thought it looked good
Topics: tabletop, nerd, dice_box, Dungeons__Dragons, tabletop_gaming, Dice, Dungeon, thingiverse,...
5
5.0
-
-
-
by
Dungeon Master Dan (Dungeon-Master-Dan)
data
eye 5
favorite 0
comment 0
Here is a Companion Cube dice I designed for a Science Fiction themed Dungeons & Dragons campaign I'm running. I haven't had time to print it yet so I'm not sure how well the bottom will turn out. When I do print it, I'll try to let you know in the comments.
Topics: portal, stl, dungeons_and_dragons, portal_2, aperture_science, aperture_labs, Aperture,...
3
3.0
data
eye 3
favorite 0
comment 0
This is the Pillars of Stone II sample file: https://www.kickstarter.com/projects/xykit/pillars-of-stone-ii-3d-printable-tabletop-accessories?ref=cbzqw0 Support-Free | Tabletop Acessories Kickstarter is live from June 2 - June 30, 2021, I hope you'll come check it out. This little rock golem has stashed his dice on these pedestals, great for displaying your favorite dice on a shelf, or keeping track of them during game play.
Topics: dice_pedestal, rock_golem, gaming_dice, Toy & Game Accessories, dnd, tabletop, dice_holder,...
3
3.0
-
-
-
by
Christopher Schoen (crschoen)
data
eye 3
favorite 0
comment 0
I created this thing to serve as both a dice tower and a carrying case for my dice, and with the requirement of fitting in the smallest form factor possible. This prints in place in one go. As long as your printer can handle a 55° overhang this can be printed without supports. * The tower will accommodate dice up to 1 inch (25.4mm). * The perimeter is the same size as a playing card, so it will fit in a card box. * The box will also fit a full standard sized set of Chessex dice. This is my...
Topics: Dungeon, dnd, Dungeons__Dragons, supportless, Expandable, case, dungeons_and_dragons, tower,...
5
5.0
-
-
-
by
Pedro Jose Franco (pedro223)
data
eye 5
favorite 0
comment 0
A remix i made of sablebadger's bullet dice, with the symbols of his normal skid dice instead of names for better clarity.
Topics: stl, Gaslands, Dice, dice, gaming_dice, thingiverse, gaslandsrefueled
9
9.0
-
-
-
by
Christopher Laudo (CounselorTech)
data
eye 9
favorite 0
comment 0
Five-sided dice designed using Tinkercad. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jBOqlwLzczB
Topics: 3D Printing, stl, gaming_dice, thingiverse, dice
9
9.0
-
-
-
by
Arik Newman (Ariknew)
data
eye 9
favorite 0
comment 0
Facecube is actually Dice with 6 faces like every dice but instead numbers carved to the face i design 6 different expression
Topics: stl, Dice_game, Dice, cube, gaming_dice, thingiverse
8
8.0
-
-
-
by
steve andrews (Galvatrondeva)
data
eye 8
favorite 0
comment 0
This is not a Remix, but very much inspired by https://www.thingiverse.com/thing:105296 and https://www.thingiverse.com/thing:1610141 Numerical faces are aligned to be used as a countdown die. The Top seam shouldn't snag or over hang when closed. There is a little notch between 16/20 along the edge that should help easily line the lid up. It was also intended to help lift the lid when opening. However i found that sliding the top across the magnets was much better and more gratifying than...
Topics: box, boardgame, gift_box, dice_box, magic, storage_container, thingiverse, dice, Storage_Box,...
9
9.0
-
-
-
by
Shawn Ba (BaudlerArtDesign)
data
eye 9
favorite 0
comment 0
Dice case with magnetic removable lid. Lid and case have indents for 1/8 x 1/16 magnets. (I used these , and a drop of super glue.. Should hold a full set of Dice for D&D etc. With magnets case can be held (& even shaken) while upside down with dice inside & lid stays on well. Printed in Hatchbox PLA on my Odin One from Hooklet 3D 30% Infill
Topics: Roleplaying, thingiverse, gaming_dice, RPG, stl, gaming, tabletop, dice, Dice, D&D,...
4
4.0
-
-
-
by
Ballad Black (BalladBlack)
data
eye 4
favorite 0
comment 0
Simple folding mini dice tower from my other designs, by itself.
Topics: tabletop_rpg, 3D Printing, dice_tray, dungeons_and_dragons, stl, dice_box, gaming_dice, dice,...
9
9.0
-
-
-
by
Steve B. (SineCera88)
data
eye 9
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iaAJdRA54dF
Topics: thingiverse, stl, gaming_dice, tool holder, dice, 3D Printing
6
6.0
-
-
-
by
Michael Midyett (dunkingmidget17)
data
eye 6
favorite 0
comment 0
These are models of the standard black, red, and white attack dice used for Star Wars Legion. The number of hits, critical hits, and surges, and placement and orientation of all, are placed to exactly match the originals.
Topics: table_top, Legion, Tabletop_Game, stl, star, dice, attack, thingiverse, Fantasy_Flight_Games,...
3
3.0
-
-
-
by
Boneconauta (Boneconauta)
data
eye 3
favorite 0
comment 0
This is a remix of the best of the two person work, "MementoMori" and "Preplook". The bottom of the tower (round part) is part of the MementoMori tower, along with the round part of the tray. The Preplook part is the bumps and channels parts so that the tower would lock into an opened position and a closed position. added a lid created by juicy_b
Topics: stl, Dice, dnd, box, thingiverse, gaming_dice, d&d, dice tower, tower, dice
5
5.0
-
-
-
by
Collin Abbott (collie20)
data
eye 5
favorite 0
comment 0
you will need 4 magnets 3mm by 6mm. I bought 100 pack for about $8 try the new loose fit. the normal lid fits very tight and may be hard for some to open. dice are easier to keep and grab out of v3 over v1 and v2 of this model. I made this as small and as tight as I feel comfortable with. It is a very tight fit so you will either need to insert magnets while the print is still hot or heat up the magnets to insert them. I did this because I don't want to use glue or have the magnets falling out....
Topics: dnd, dungeons_and_dragons, Dungeons__Dragons, stl, dice_box, d&d, gaming_dice, dungeon_dnd,...
3
3.0
-
-
-
by
Bill D (onebilliamdollars)
data
eye 3
favorite 0
comment 0
UPDATE 5/29/20: I lowered the height of the inner portion of the bottom tray to make it easier to pull out the dice. I was having trouble getting my fingers around certain dice for a good grip, especially the d4. Also took out the pen and widened the compartments for miniatures. Use "dicebox_bottom_shorter_wider.stl" for the updated version ---------------------------------------------------- Remix of this dice tray from Duftpukie: https://www.thingiverse.com/thing:3240403 Added...
Topics: thingiverse, pathfinder, stl, Toys & Games, miniatures, gaming_dice, 25mm, dice, dice_box, dnd,...
9
9.0
-
-
-
by
Le Labo d'Heliox (HelioxLab)
data
eye 9
favorite 0
comment 0
Bonjour à tous ! Voici le fichier que vous pouvez imprimer pour terminer le projet du dé électronique. Toutes les étapes de créations sont sur ma chaîne : https://www.youtube.com/c/HelioxLab
Topics: electronic_dice, dice, Electronics, gaming_dice, dé électronique, thingiverse, heliox, stl
8
8.0
-
-
-
by
Toutan Watson (Toutan)
data
eye 8
favorite 0
comment 0
Have not test printed it, my M3D micro is too small to print in one piece. I really just needed some Fusion 360 practice and this is the result, hopefully it prints alright! Designed it to be 4 inches in diameter and 5 inches tall without the lid on it.
Topics: dice, gaming_dice, tabletop_rpg, dice_tower, dice_box, thingiverse, Dice, stl
10
10.0
-
-
-
by
Alex D. (FanCarver)
data
eye 10
favorite 0
comment 0
Just a dice :) Upd 10-01-18 The edges of 3 and 5 were reversed in places. Fixed.
Topics: dice, gaming_dice, thingiverse, Dice, Dice_game, stl
8
8.0
-
-
-
by
Alexander Dabney (AlexandersWorkshop)
data
eye 8
favorite 0
comment 0
I was having trouble with my players getting too excited and tossing their dice off the table so I designed a dice tray inlaid with the Dungeons and Dragons & on each side. I have also included a stencil for tracing the felt for the inside.
Topics: stl, dungeons_and_dragons, tabletop, gaming_dice, Dice, dice, dice_tray, game, D20, d&d,...
5
5.0
-
-
-
by
Alexander van Hattem (Veeech)
data
eye 5
favorite 0
comment 0
PLEASE READ ALL THE PRINT SETTINGS. This print has some technical challenges which may not be immediately obvious! This is a dicebox without dividers, with a lid that can be used as a rolling tray, designed to have magnets hidden within it during the printing process. The lid features the rune for abjuration magic, as it appeared in the days of the D&D 3.5 Player's Handbook. Use the 10mm base if you have "mini" style dice, in which case the box can fit 49 dice or 7 complete...
Topics: dnd, dungeons_and_dragons, gaming_dice, stl, thingiverse, Dice, Roleplaying, RPG, dice
8
8.0
-
-
-
by
Harry Ragland (OpenScadDad)
data
eye 8
favorite 0
comment 0
This is a Rhombic 12 sided dice. The Customizer lets you place up to 12 characters of text along the long diagonal of each side. [ *** IMPORTANT ***] I cannot stress this enough. This dice has 12 sides but there are only 6 text lines. You enter two messages in one line by separating the messages with a "/". If you leave off the "/" you will get two blank sides. I did this so that I could pair messages on opposite sides of the dice. The roundness slider lets you round over...
Topics: dice, customized, customizer, gaming_dice, thingiverse, Dice, stl
9
9.0
-
-
-
by
Leandra Schneider (LeandraChristine)
data
eye 9
favorite 0
comment 0
Dice Compartments for the d8 Attack and Defense Dice from the X-Wing game! Make your dice look neat too! Two fit perfectly into a small slot of the "Pro"-Line of Stanely Toolboxes ontop of each other. I included the Free-Cad File so you can use the base block to build other storage (ships etc) out of it. I made it from scratch so is not a proper remix, but I wanted to give credit for the original idea ;) In contrast to the Custom Bins there are tension easing slots on the side to help...
Topics: game, games, Games, stl, xwing, gaming_dice, xwing_miniatures, thingiverse, stanley_organiser,...
10
10.0
-
-
-
by
Eduardo Testart (3BRBS)
data
eye 10
favorite 0
comment 0
A six sided die (d6), just composed of the axis
Topics: boardgames, thingiverse, Dice_game, boardgame, Dice, stl, dice_games, gaming_dice, Die,...
4
4.0
-
-
-
by
Matthew Evans (TheMatman)
data
eye 4
favorite 0
comment 0
Simple dice for various dice games.
Topics: stl, Dice, thingiverse, gaming_dice, D6_dice, dice
9
9.0
-
-
-
by
Jim (Wilmanric) Pacek (jpacek)
data
eye 9
favorite 0
comment 0
I bought the excellent DungeonMorph Dice http://www.dungeonmorphs.com/dice.shtml and I wanted a grid to hold them together after rolling. I intend to make a 4x4, 3x4 and maybe even a 5x5 grid if I like this one. If I knew more, I'd make a customizer... maybe a project for the future!
Topics: thingiverse, maps, gaming_dice, stl, Dice, dungeons_and_dragons
