2
2.0
-
-
-
by
jerome prudhom (jamesou82)
data
eye 2
favorite 0
comment 0
bonjour, c'est un remix modifié du fanduct de domi1988. j'ai juste modifié les deux embouts de refroidissement de l'impression pour qu'ils ventilent plus prêt de la buse d'impression. Ensuite, j'ai ajouté un conduit sur la face avant avec un ventilateur 40x40x20 pour refroidir le corps d'extrusion d'origine de geeetech. ps: j'ai gardé la cage d'origine, les deux petits ventilateurs de chaque coté et le support du 3d touch.
Topics: extrudeur geeetech, thingiverse, A20M, a20m extruder, 3D Printer Extruders, geeetech, Ventilation,...
2
2.0
-
-
-
by
JOSE PLAJA (JPlaja)
data
eye 2
favorite 0
comment 0
Este pomo esta creado para utilizarse en la nivelación de la cama. Esta preparado para insertar una turca de M3 en el interior. Su diseño es con 5 brazos porque el avance de una tuerca de M3 es de 0,5mm por vuelta, por lo cual cada numero de las puntas, corresponde a 0,1mm. Para conseguir los números de otro color es necesario cambiar el filamento en las ultimas capas. También puedes colorear la parte superior de los números con un rotulador.
Topics: wheel, pomo, thingiverse, cama, 3D Printer Parts, stl, geeetech_i3_pro_b, bed_leveling, geeetech,...
4
4.0
-
-
-
by
Matthias Leuner (Matze91185)
data
eye 4
favorite 0
comment 0
Geeetech A10 Filamentarm mit Kugelführung und Profilclip
Topics: geeetech, thingiverse, 3D Printing, stl
3
3.0
-
-
-
by
Rob Atha (Sp00kie13)
data
eye 3
favorite 0
comment 0
I've been 3D printing for many years now, and always found that Bed leveling was a pain as it was just an estimation. A while back I decided to use a dial indicator with my old CTC replicator which improved the prints immensely. So when I decided to upgrade my printer to the Geeetech Pursa I3 Pro B I had to put my indicator into my design. I had a look around the designs on thingiverse but found that all the designs seamed to make things too complicated. The design I came up with was simple, A...
Topics: stl, bed_leveling, Pursa, thingiverse, Dial_Indicator, geeetech_i3b_acryli, pursa_i3, 3D Printer...
3
3.0
data
eye 3
favorite 0
comment 0
(right and left front legs needs the parts edited so hold off on printing) Front power supply mount/Feet, Flush with the top of the 4040, Needs angled power supply cord. I also mounted the switch from the out side to the inside of the cover to get a little more space. I have a rear mounted motherboard/PI case. The reason why i moved the power supply was due to the Dual Z and wanted the fan facing down. Will post pics as soon as i get around to it. (right and left front legs needs the parts...
Topics: stl, mount, creality_ender_3, thingiverse, feet, Geeetech_A10, power, legs, power_supply,...
3
3.0
-
-
-
by
Davide Savarro (Dosclic98)
data
eye 3
favorite 0
comment 0
You will need 2 x M5x20 mm screws (GoPro screws are fine as well) 2 x M5 bolts (also the GoPro one are fine) 4 x M2x10 mm screws to tight the camera with the front part (also 2 are enough) I created this pieces to let me put my Raspberry IR camera in the position i wanted near my raspberry pi 3B+. The Round_Joint is round to fit in the support piece so you can regulate the direction you want to point the view, using the other junctions you can tilt the camera up and down. You might need a bit...
Topics: stl, acrylic, mount, infrared, camera, prusa_i3, thingiverse, GoPro, Raspberry_Pi, bracket, holder,...
4
4.0
-
-
-
by
Shane Kartz (skartz)
data
eye 4
favorite 0
comment 0
I created this universal camera mount to sit on the lower rail of my CR-10 using a t-nut and M5 screw. It will fit on any printer frame that uses 2020 or 2040 extrusions. It works great with any of these style of HD webcams and Octoprint: It works great with any of these style of HD webcams and Octoprint: https://amzn.to/3bJBa0H https://amzn.to/3487XtS https://amzn.to/2Vb9CL9 https://amzn.to/3dT3MGs https://amzn.to/3dSxgEn I recommend printing it with PETG. I use the Overture brand. This stuff...
Topics: Octoprint_webcam, webcam, Tevo, thingiverse, Creality, Geeetech, webcam_holder, 3D Printer...
4
4.0
data
eye 4
favorite 0
comment 0
Summary This is a holder filament that you can put on the printer, so everything will be more compact Post-Printing
Topics: geeetech, thingiverse, filament_holder, e180, stl
3
3.0
-
-
-
by
Bryan Mann (brywithay)
data
eye 3
favorite 0
comment 0
I designed this simple thing to mount my Geeetech A10 power supply to the bottom of my Lack table enclosure.
Topics: a10, thingiverse, 3D Printer Accessories, Geeetech_A10, Geetech, stl
3
3.0
-
-
-
by
daniel desc (dandesc)
data
eye 3
favorite 0
comment 0
Found my Geeetech kit not enough rigid, so I made a remake. Geeetech replacement for x carriage back-plate. For use with original Geetech bearing and clamps. Matching extruder support remixed from someone else design that i lost the source ( thx to whom it may concern).
Topics: x-carriage, thingiverse, 3D Printer Parts, geeetech, stl, carriage
3
3.0
-
-
-
by
Tom Makes (tommakesmusic)
data
eye 3
favorite 0
comment 0
I thought the side fan, the one that blows across the driver board, on my Geeetech Acrylic i3 pro B needed a bit of help in making sure that the most airflow gets to where its needed... hence this piece. No holes are included as you will need to adjust the position depending on your particular printer. I just lined mine up correctly and used a Dremel tool to quickly add them in the appropriate place. I am also using this piece to learn Fusion 360 (this is why mine has my name added to it!) so...
Topics: thingiverse, 3D Printer Parts, Geetech_I3_pro_B, stl, geeetech_i3b_acryli, geeetech
3
3.0
-
-
-
by
schifano pascal (macaron16)
data
eye 3
favorite 0
comment 0
I wasn't happy about the quality of the original fanduct. I think it's a reason of the stringing. So I decided to create a new one. I add create a purge wipe, so I design them to fit my current configuration. Let me if you want some modification.
Topics: Geeetech_A30M, Geeetech, fanduct, A30M, thingiverse, Pla_FanDuct, 3D Printer Parts, stl
5
5.0
-
-
-
by
3Diy project (3DiyProject)
data
eye 5
favorite 0
comment 0
Watch our video on youtube: https://youtu.be/3Zh-KrCZ2dU and don't forget to subscribe! If you want support us on Patreon: https://www.patreon.com/3diyproject Follow us on Instagram: https://www.instagram.com/3diyproject/?hl=it IF THE "DOWNLOAD ALL" BUTTON DOESN'T WORK YOU CAN DOWNLOAD THE FILES FROM THE "THING FILES" SECTION [ENG] Good morning to all those who follow us and to the others, in today's video we will explain you how to build and assemble a support for arduino...
Topics: quarantine, diy, geeetech, Health, gardening, 3dprintable, garden, humidity, plant, arduino_box,...
3
3.0
-
-
-
by
Daniel Wolters (Auravendill)
data
eye 3
favorite 0
comment 0
I have mounted the orginal bearings upside down and added more in the old place of them to make the carriage more rigid. But this also meant that the wobble fixes from others wouldn't work anymore for me. So I designed my own anti wobble fix, that grips onto the outside of the bearing instead of the smooth rod and is a bit longer to get the arms on the right height. I am using 3 M3 15mm screws for each side.
Topics: thingiverse, 3D Printer Parts, geeetech_i3_pro_W, Z-Wobble, wobble, stl, anti-wobble, Z-Axis,...
3
3.0
-
-
-
by
Hiroki Miyauchi (saipanda8801)
data
eye 3
favorite 0
comment 0
I created this because I was having a hard time organizing my yen coins. The attached data are made by the official Japanese coin diameter. My 3D printer needed to make it 0.1 to 0.9mm larger than the actual diameter of the yen coin. Please modify the attached ".step" file by yourself. I pray that I can be of service to you. Japanese coin size 01_\500 =φ26.5mm 02_\10 =φ23.5mm 03_\100 =φ22.6mm 04_\5 =φ22mm 05_\50 =φ21mm 06_\1 =φ20mm reference(My 3D Printer Setting) \500 = - \10...
Topics: i3_Pro_B, geeetech_i3_pro_b, thingiverse, coin_sorter, Organization, coin, stl
3
3.0
-
-
-
by
jerome prudhom (jamesou82)
data
eye 3
favorite 0
comment 0
Ce conduit se fixe directement sur la cage de l'A20M. il est vissé avec les 4 vis d'origines+ 2 X M3x16. veuillez me laisser vos messages si vous avez des soucies. bon print!!!
Topics: A10M, thingiverse, A20M, geeetech, 3D Printer Parts, stl
3
3.0
-
-
-
by
innsomniac (innsomniac)
data
eye 3
favorite 0
comment 0
Updated Version, this will now fit both the V6 and the Volcano Assembly instructions and parts list are provided in the accompanying PDF guide. printed without supports, but you may want to use a raft for the cooling shroud. Happy printing!
Topics: 3D Printer Parts, geeetech_A30, a30, e3dhemera, e3dv6_mount, thingiverse, E3D_v6, E3D_Volcano,...
4
4.0
-
-
-
by
Marta Martusha (Martusha)
data
eye 4
favorite 0
comment 0
Standard M6 coupler for updated (version 5) endpoint with spring for Martusha Filament System. Fits bowden systems/ Endpoint version 5 https://www.thingiverse.com/thing:4028350 Feet for Martusha filament system at: https://www.thingiverse.com/thing:3984032 Martusha Filament System is available at Amazon: https://www.amazon.com/s?k=Martusha&ref=nb_sb_noss_2 Platform video introduction: https://youtu.be/C5UE_E3Ka2M Cover for handle: https://www.thingiverse.com/thing:3984657 Spacer for special...
Topics: extruder, cool-end, Bowden, geeetech, coupler, thingiverse, stl, spool_holder, 3D Printer...
3
3.0
-
-
-
by
Francisco Esteban Leuman (Francisco_Esteban)
data
eye 3
favorite 0
comment 0
Esta pieza es una modificación del archivo Direct drive mount for Geeetech A10 (stock parts) by Woyta94 https://www.thingiverse.com/thing:3293736 , para hacer coincidir las perforaciones para la fijación de la pieza y la guía del filamento, con las dimensiones del extrusor original de la impresora Magna 1. Esas tres perforaciones fueron desplazadas tres milímetros hacia la pared donde se fijan el conjunto extrusor motor. Recomiendo a quien quiera utilizar el archivo, que verifique las...
Topics: stl, Geeetech_A10, Magna_1, thingiverse, 3D Printer Accessories
3
3.0
-
-
-
by
Julius Caesar (caesar_1111)
data
eye 3
favorite 0
comment 0
I put a hole in the original screw so you can use a M4x25 screw and 2 safety nuts M4 to creat a turing handle for faster spinning. I now also included the original smaller version of the knob Fore some printers like the CR-10, CR-10S PRO, A10 or A10M you will also need the new z-axis cover plate from the original design: https://www.thingiverse.com/download:4108654 or https://www.thingiverse.com/thing:2491782
Topics: geeetech_A10M, thingiverse, 3D_Printer_Parts, creality_ender_3, Made_with_FreeCAD, 8mm_leadscrew,...
2
2.0
-
-
-
by
Akos Wonerth (redangel1984)
data
eye 2
favorite 0
comment 0
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the page) If you like it, don't forget to leave a TIP for a cold or warm beverage: https://www.paypal.me/akoswonerth This is one of my upgrades after I installed the E3D Hemera Extruder/Hotend. The slightly heavier Hotend needed a little more support on the right side...
Topics: geeetech_A10M, geeetech_A20M, 3D Printer Parts, Geeetech_A10, thingiverse, dual_z, dual_z_axis,...
9
9.0
-
-
-
by
Bruce Moore (wbrucem)
data
eye 9
favorite 0
comment 0
I have been using Painless360's carriage clip for a while, which has been a bit of a love/hate relationship. I love when it works as intended, but I hate forgetting to remove it for the start of the next print. I'm eliminating the hate by converting the clip into a servo controlled device. This is designed for a generic 9g servo motor. I'm running an MKS Gen controller board in my printer, which includes g-code addressable servo ports, so operating the servo will be pretty straight forward for...
Topics: 9g_servo, geeetech_g2s, stl, thingiverse, 3D Printer Accessories
10
10.0
-
-
-
by
Bruce Moore (wbrucem)
data
eye 10
favorite 0
comment 0
Please note: This is for a larger, 360 watt power supply, *not* the 250 watt model being shipped with Geeetech printers. You can recognize the 360 watt model by its built-in fan, visible toward the right side in my photos. If your supply doesn't look like mine, this cover probably will not fit. This is a cover for a commonly available 360w (12v @ 30a) power supply, used for 3D printers, communication gear, LED lights, etc. I designed this one to stand the power supply on edge for a smaller...
Topics: Electronics, geeetech_g2s, stl, thingiverse, power_supply_cover
5
5.0
-
-
-
by
Julius Caesar (caesar_1111)
data
eye 5
favorite 0
comment 0
If you want to story your SD-card close to where it belongs....
Topics: A10M, stl, thingiverse, geeetech_A10M, a10, 3D Printer Accessories, Geeetech_A10
4
4.0
-
-
-
by
Przemyslaw Szulc (psemeq)
data
eye 4
favorite 0
comment 0
I've took original newest Tech2c hotend holder and changed holes spacing to 23 mm so it will fit Geeetech x-carriage with lm8luu bearings. M3 nuts fit in.
Topics: geeetech, stl, thingiverse, E3D, Geeetech_i3, 3D Printer Parts
4
4.0
data
eye 4
favorite 0
comment 0
Support for belt of X axis so it is (nearly) parallel with the axis. Suitable for Creality, Geeetech, Anet, Tevo, Tronxy, Alfawise, Raiscube, SainSmart, ... printers. After printing, take off the belt stretcher (right side wheel). Leave belt on the carriage and slide in the printed parts one after another. Then put the wheel back on. It is easier then leaving the wheel on.
Topics: a30, raiscube, tevo, stl, Alfawise, TRONXY, Ender, 3D Printer Parts, Creality, geeetech, sainsmart,...
4
4.0
-
-
-
by
Brad Goulet (DrViewMaster)
data
eye 4
favorite 0
comment 0
I get tired of misplacing my SD cards so I came up with a SD card holder for Geeetech A10M, Ender and alike printers, mounts to display panel using the 2 factory screws holding display panel on already.
Topics: stl, 3d_printer, SD_Card_Holder, thingiverse, Ender_3, geeetech, 3D Printing
6
6.0
-
-
-
by
Sonesh Patel (sonesh)
data
eye 6
favorite 0
comment 0
Tired of using the filament spool holder that my Geeetech Pro W (wooden version) came with, and wanting to reclaim my desk space, I created a bracket that fits on to the top of the A Frame on either side of the screen. By pure luck, it slots in perfect against the screen and still allows you to insert/remove the SD card. This also feeds the filament from the top, so results in the filament not being pushed and pulled around so much, and not getting caught (TPU constantly falling off the spool...
Topics: geeetech, stl, 3D Printer Accessories, thingiverse
7
7.0
-
-
-
by
Pizzu NOART3D (Pizzu_NOART3D)
data
eye 7
favorite 0
comment 0
Hi. this is my personal remix of my (in origin) Geeetech G2s. - MORE STABILITY - MORE SILENT if you any question please contact me. Print and share! To make this remix you have need to: 12 linear bearing LMUU10 https://www.amazon.com/PerfecTech-Linear-Bearing-Bushing-Printer/dp/B01LXX22B0/ref=sr_1_16_sspa?s=industrial&ie=UTF8&qid=1527322872&sr=1-16-spons&keywords=linear+bearing+10mm&psc=1 3 fan 30x30x10...
Topics: 3D Printer Parts, g2s, magnetic_effector, Delta_G2s_Pro, MAGNETIC MOD, thingiverse, g2s_pro,...
7
7.0
-
-
-
by
Akos Wonerth (redangel1984)
data
eye 7
favorite 0
comment 0
This mount can be mounted directly to the Steel plate of Geeetech printers without any hassle. Use 3pcs: M3 square nuts & M3x6 screw to mount to the steel plate It goes well with my other designs: Black plate Igus adapter and BLTouch Mount(here is the link): https://www.thingiverse.com/thing:2760261
Topics: adaptor, E3D_Titan_Aero, titan, Geeetech_i3b_acrylic, 3D Printer Parts, thingiverse,...
8
8.0
-
-
-
by
jarle teigland (jarjargeek)
data
eye 8
favorite 0
comment 0
This is my first 're-engineered' parts for my Geeetech i3B - please NOTE ; not all made and assembled yet but parts are functional. Print / remix as you like BUT I do NOT take responsibility for mishaps - I'm a 3D noob . . . . xD The idea is a 'snap on / off/ carriage for icus / LN 8mm bearings with add-on mounts for e3D and BLtouch. BE WARNED - work in progress !! UPDATE: Fan duct aperture WAY to small for a 40mm fan - NOT powerful enough to effectively push air through 'nozzle' - need at...
Topics: RJ4JP-01-08_IGUS, 3D Printer Parts, XAXIS, bltouch_mount, thingiverse, Geeetech_i3,...
6
6.0
-
-
-
by
alessandro foroni (ilforo88)
data
eye 6
favorite 0
comment 0
convogliatore per ventola 60x60 mm, adatto a geeetech i3 pro b fun extruder. dimension fan 60x60 mm
Topics: fan, thingiverse, extruder, cooling_fan, 3D Printer Extruders, stl, geeetech_i3_pro_b
8
8.0
-
-
-
by
Masayuki Tomita (ybjack)
data
eye 8
favorite 0
comment 0
This is bed-side y-axis cable chain. I brought the chain position slightly to the bed side. And optimized the details. chains are print in place. no support, no glue. Some possibility, you need extension cable of thermo sensor. 1)Y_cable_chain_print at_once.stl Print at once all parts. 2)narrow_cable_chain_8x2.stl Print in place cable chain, 8 link x2 lines. 3)Y_cable_chain_adaptor_to_hotbed.stl Chain end for hotbed. 4)Y_cable_chain_adaptor_to_z-bottom.stl Another chain end for top of z-axis...
Topics: PiP, y-axis, 3D Printer Accessories, cable, Pro B, chain, thingiverse, geeetech, print in place, stl
7
7.0
-
-
-
by
Artur Gringoling (Gringoling)
data
eye 7
favorite 0
comment 0
not tested yet. comment if there are any issues pls.
Topics: 3D Printer Parts, fan_duct, fan, thingiverse, Geeetech_i3, part cooler, pro b, geeetech, stl,...
7
7.0
-
-
-
by
Wutt Tinggg (Jawas)
data
eye 7
favorite 0
comment 0
I made this to drop my z axis motors after installing a wobble fix which created fouling of my brass nut and downloaded couplers. It fits between your motor and the printer frame, the motor becomes offset so you can screw it all together with simple bolts. Totally safe to have the motors at an angle by the way. Bolt to your motor first then line up and screw to the frame I have since printed a lot of things and had no issues, good luck I hope this helps someone! You will need some M3 bolts, I...
Topics: 3D Printer Parts, lower, thingiverse, Geeetech_i3, spacer, fix, stl, geeetech_i3_pro_W, z_axis
6
6.0
-
-
-
by
Michael Helmreich (mhelmreich)
data
eye 6
favorite 0
comment 0
This is a single component to provide the x axis assembly incorporating a volcano head with a bowden setup with hotend cooling fan, as well as two centrifugal blowers for print cooling. The video may make it easier to understand.
Topics: 3D Printer Parts, Geeetech_I3, thingiverse, volcano, prusa_i3, stl, geeetech_i3b_acryli
7
7.0
-
-
-
by
Ben Jeromin (bjeromin)
data
eye 7
favorite 0
comment 0
A version of the original that I changed a bit so you can adjust the height since otherwise it was too low for the nozzle on my printer.
Topics: 3D Printer Accessories, mk8, thingiverse, i3 pro, i3 pro b, fan mount, geeetech, stl
3
3.0
-
-
-
by
Eduardo Oliveira (eduardooliveira)
data
eye 3
favorite 0
comment 0
the profile is still a work in progress but it works Any doubts or comments are appreciated
Topics: thingiverse, 3D Printer Parts, geeetech_A10M, 2in1out, bigtreetech, zsyong, stl, geeetech
2
2.0
data
eye 2
favorite 0
comment 0
This is a distance keeper for the TUSH. I realize when the spool comes to the end and begin to be more and more lighter that the TUSH move to the printer and make some problems. At beginning I make a paper prototype ... (2 weeks :-p... I'm lazy sometimes), and after I make this distance keeper. It's really an easy print (no support, no skirt/brim/raft) and very light. Have fun.
Topics: 3D Printer Accessories, thingiverse, Geeetech A10, filament, keeper, geeetech, distance, tush, A10,...
3
3.0
-
-
-
by
Hiroki Miyauchi (saipanda8801)
data
eye 3
favorite 0
comment 0
I made a toothbrush holder to practice 3D model creation.
Topics: geeetech_i3_pro_b, toothbrush_holder, thingiverse, Toothbrush, holder, Bathroom, stl
3
3.0
-
-
-
by
Hiroki Miyauchi (saipanda8801)
data
eye 3
favorite 0
comment 0
I thought about adding a caster because moving the fan heater was troublesome. I created an adapter that attaches a 6 mm diameter caster to the fan heater. I attach a ".step" file so that I can change it freely because it is difficult to support all fan heaters. * A caster with a shaft diameter of 6 mm must be prepared separately. * I improved the one made before.
Topics: stl, Household Supplies, fanheater, adapter, thingiverse, caster, geeetech_i3_pro_b
3
3.0
-
-
-
by
Andreas Neugebauer (neugy)
data
eye 3
favorite 0
comment 0
The mount (soporte.stl) for the optical endstop fits pretty fine. You just need two M4x12mm (or M4x10mm) screws and t-slot nuts since the Geetech A10 uses M5 for fixing the original endstop (beside the two M3x8 screws and nuts that are needed to mount the electronics). Or you can print this part with about 4 walls and then just use a 5mm drill to make the original screws fitting. Unfortunately the hole for fixing the activator is to low and the activator does not pass the photo sensor in the...
Topics: endstop, thingiverse, 3D_Printer_Parts, 3D Printer Parts, stl, Geeetech_A10, geeetech
4
4.0
data
eye 4
favorite 0
comment 0
New concept of belt tensioner. It uses push instead of pull so it takes less space. Requires hex head bolt (long enough). Hex or square nut can be used for the main bolt. Slots for frame nuts are designed for hex nuts. Current design uses: - 2x M5 frame bolts - M5 connection bolt - M4 pulley bolt Designed for Geeetech A30 but can be customized for other printers.
Topics: geeetech, 3D Printer Parts, tevo, anet, stl, Creality, thingiverse
3
3.0
-
-
-
by
Samuel Brown (sunboy4224)
data
eye 3
favorite 0
comment 0
A stepper cover that adjusts the x-axis end stop approximately 2-2.5mm farther away from the bed on Geeetech A-series printers (any more may risk other parts of the hot end carriage hitting the stepper motor housing). Intended to give a small amount of extra space when using a purge bucket (https://www.thingiverse.com/thing:3372835). Make sure that you adjust your printer's end stop location so that it can properly home with the newly adjusted endstop location (either in the firmware, or by...
Topics: stepper cover, thingiverse, stl, 3D Printer Accessories, geeetech, stepper_motor, x-axis
4
4.0
-
-
-
by
Alexander Polyanskikh (apolyanskikh)
data
eye 4
favorite 0
comment 0
Remix of my own tool box https://www.thingiverse.com/thing:4245207 I've found that some compartments don't work well for me. Also I think mounting screws were redundant - the box sits well on the power box on it's own. It's possible to add some double-sided sticky tape, of course. Also, while the original tool box was designed in Tinkercad and not very customizable, this one is made in Fusion 360 and I'm including the source file. Make sure to check parameters if you'd like to change wall...
Topics: thingiverse, stl, 3D Printer Accessories, geeetech_A10M, Geetech_A10, tool_holder
4
4.0
-
-
-
by
Hiroki Miyauchi (saipanda8801)
data
eye 4
favorite 0
comment 0
I was inspired by the brilliant idea of "terraplanter" and realized with a 3D printer We checked to see if it couldn't be done. https://www.kickstarter.com/projects/terraplanter/terra-planter-the-inside-out-hydroponic-planter-pot As a result, I found the water to be useless, as it ran off in about a day. After all, it seems that only a special type of clay can achieve this. Resolution:0.2 outer wall:0.4 Infill:25% Filament_material:PLA(clear) Resolution:0.2 outer wall:0.8 Infill:25%...
Topics: geeetech_i3_pro_b, Outdoor & Garden, thingiverse, stl, i3ProB, terracotta
3
3.0
-
-
-
by
Gigi Leogrande (duegi)
data
eye 3
favorite 0
comment 0
Evita il consumo del sensore runout con sede per tubo PTFE (per inserire il tubo in PTFE immergere il prototipo in acqua calda) Aggiunta versione guida filamento per versione senza sensore presenza filamento, per attacco diretto su sfera in acciaio. It avoids the consumption of the runout sensor with seat for PTFE tube (to insert the PTFE tube immerse the prototype in hot water) Filament guide version added for version without filament presence sensor, for direct connection on steel ball.
Topics: a10, fix, geeetech, stl, Geeetech_A10, Runout_sensor, sensor, runout, thingiverse,...
3
3.0
-
-
-
by
Mathew Hill (Mojogameplay)
data
eye 3
favorite 0
comment 0
remodeled purge bucket for my A20M. This is in dual color. Maybe the last prime tower you need to print.
Topics: stl, a20, thingiverse, purge, A20M, Purge_bucket, geeetech_A20M, a10, 3D Printer Parts,...
3
3.0
-
-
-
by
Fipsy Odin (od1n)
data
eye 3
favorite 0
comment 0
This partbox is created for those how often disassemble their graphics card to replace the thermal compound. To be sure to always reassemble the right screw to it's right place you can use this printed part with holes and sinkhole to store the parts while you're working.
Topics: Storage_Box, nvidia, Small_Parts, Toolbox, gpu, disassembly, Small_Box, stl, pcie,...
3
3.0
-
-
-
by
David Smith (StanSPP)
data
eye 3
favorite 0
comment 0
I was never really happy with the original geometry of the Geeetech i3 Pro B, especially after upgrading to a MK3 style 220x220mm heated bed because I was struggling to get the nozzle to use the full width of the bed. Even after swapping the original Geeetech MK8 extruder for a BMG clone and a V6 hotend I couldn’t get the nozzle to the edges of the bed without hitting the Lead screws. Also, I always felt the X-axis assembly had too much play in it and I felt it was preventing me getting a...
Topics: geeetech, stl, 3D Printer Parts, prusa_i3_mk3, thingiverse, geeetech_i3_pro_b
