3
3.0
Jan 19, 2022
01/22
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
It allows you to fix the cables using the fantastic Heavy Duty project https://www.thingiverse.com/thing:2494642 and also to align the 2 supports for the 5015 fans. For those who use only one fan, must print the "NoFan_support.stl" file For mounting, 2x M3 nuts (no nyloc) and 2x M3x25 screws are used A plastic clamp is used to fix the cables There are 2 versions: - "Cables Holder for normal nuts.stl" for those who fix the 5015 fan to the wing through normal nuts (no nyloc)...
Topics: thingiverse, volcano_E3d, heavy, heavy_duty, Ender_3_Pro, holder, E3D, cr10s, E3D_Volcano, Ender_3,...
3
3.0
Mar 19, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
The Geeetech A30 firmware (Smartto) hasn't the possibility to change the offsets. So You if You install Petsfang, the BLTouch (or 3DTouch) can't work on the right side With this holder, You can install it near the original position A30 Petsfang project here: https://www.thingiverse.com/thing:2993902
Topics: BLTouch, mount, Petsfang, a30, thingiverse, 3DTouch_mount, geeetech_A30, bltouch_mount, holder, 3D...
5
5.0
Jun 21, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 5
favorite 0
comment 0
Geeetech 3DWifi Support for 2020 profile http://s.click.aliexpress.com/e/_nh69o Print it in vertical with raft (or brim at least) If you liked this job and would like to offer me a coffee, click on "TIP DESIGNER"
Topics: geeetech_A10M, A10M, thingiverse, 3D Printer Accessories, stl, a10, Wifi, 3d_printer, geeetech,...
5
5.0
Jun 21, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 5
favorite 0
comment 0
An holder and for tools and M6 nozzles from 0.2 to 1.0. Spaces are for 2x microSD and 1x SD too. Use 2x M4 screws and t-nuts to fix it to 2020 frame of printer If you like this work and would like to offer me a coffee, click on "TIP DESIGNER" ------------------------- Supporto per attrezzi e nozzle M6 da 0.2 a 1.0 Ci sono anche gli spazi per 2 microSD ed 1 SD. Utilizza 2x viti M4 e t-nuts per fissarlo al frame 2020 della stampante. Se ti è piaciuto questo lavoro e vuoi offrirmi un...
Topics: geeetech_A10M, thingiverse, a30, CR10, geeetech, Geeetech_A10, geeetech_A30, Ender_3, frame,...
3
3.0
Jun 6, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
I designed all for using with my petsfang and original carriage. My carriage has a big hole in the middle (v3.3 A30). So I couldn't just drill it You need a 400mm MGN12H rail + block. You can use original belt: http://s.click.aliexpress.com/e/MGvlppuk It should works with A10 and A10M too. Please confirm me if You try it. A10 and A10M require a 300m guide: http://s.click.aliexpress.com/e/_srmsaq There are 3 solutions: A - that one I used and tested. It is composed by original carriage + printed...
Topics: thingiverse, E3D, X_Axis_Carriage, a30, geeetech, MGN12, a10, stl, geeetech_A10M, x_axis, 3D...
3
3.0
May 21, 2021
05/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
New Geeetech A30 (from v3 and newer) has a different expansion board There are 2 files: one is just for expansion board; other one has cable holder too I printed it with supports (with plate only and over 85°) and brim with 50% infill It's for A30 Petsfang project https://www.thingiverse.com/thing:2993902
Topics: cable_holder, holder, geeetech_A30, a30, new, thingiverse, expansion_board, cable, Petsfang,...
4
4.0
Jun 7, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 4
favorite 0
comment 0
The steps are as follows: - print 2 guides and the other pieces you need - remove the heated bed - remove the belts - remove the bed - apply the 2 guides - loosen the screws that secure the 2 long Y 2020 bars - place the bed with the printed guides - slide the bed to perfectly align the 2 long Y 2020 bars - tighten the screws of the 2 long bars Y 2020 - drill with a tip 3.5 - remove the 2 printed guides (You can trash them, they are not more required) - apply the 2 rails MGN12 but do not...
Topics: upgrade, mod, geeetech, Axe_Y, axes, MGN12, thingiverse, rail, stl, 3D Printer Accessories, linear,...
0
0.0
Aug 14, 2022
08/22
by
Filippo Di Lascia (gsxr2001)
data
eye 0
favorite 0
comment 0
Geeetech Filament Runout Sensor housing for BMG Direct Drive extruder Tested on Trianglelabs clone For printing, I used 0.25 nozzle, 0.12 layers Print as STL, with supports
Topics: 3D Printer Accessories, direct_drive_extruder, bondtech, Trianglelabs, geeetech, Direct_extruder,...
6
6.0
Jun 21, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 6
favorite 0
comment 0
An holder for M6 nozzles from 0.2 to 1.0. Use 2x M4 screws and t-nuts to fix it to 2020 frame of printer If you like this work and would like to offer me a coffee, click on "TIP DESIGNER" -------------------------------------- Supporto per nozzle M6 da 0.2 a 1.0 Utilizza 2x viti M4 e t-nuts per fissarlo al frame 2020 della stampante. Se ti è piaciuto questo lavoro e vuoi offrirmi un caffè, clicca su "TIP DESIGNER"
Topics: 2020_frame, geeetech_A10M, thingiverse, a30, CR10, geeetech, Geeetech_A10, geeetech_A30, Ender_3,...
5
5.0
Mar 4, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 5
favorite 0
comment 0
EDIT 8 march 2019 added v2 version: with this version, you should be able to print it in vertical just with brim! In this way You don't have to remove annoying supports! Based on the TeachingTech model, this variant has the shortest right support (touched on the bar and could not be screwed) and has a bar (with Geeetech A10M / A10 written - no written) covering the mainboard protection slot. During heating, with the X-axis hotend 0, the filament flows exactly into that slot! 3 models are...
Topics: geeetech, mainboard_cover, cover, fan, fan_duct, Geeetech_A10, geeetech_A10M, Mainboard, 3D Printer...
3
3.0
Jun 7, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
This is a great mod, but it isn't "plug&play" like the X and Y axis. It requires several calibrations. I printed all in PETG with 100% infill and all layers at 0.3. Infact, printing a 0.3 first layer and 0.2 the others, I had last layer missing and so a gap. So, check the preview of slicer before print. I had to drill the 4 holes of metal supports with a 6mm tip, to have a little bit of "play" You need - 2x 500mm MGN12H rail, 2x MGN12H blocks...
Topics: MGN12_linear_rail, geeetech, rail, thingiverse, stl, 3D Printer Accessories, linear, MGN12H,...
3
3.0
Jun 12, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
Uses: - 4x M3x8 for motor - 3x M4x8 for holder - 3x M4 T-nuts It's a modded version of the great work of jopereira https://www.thingiverse.com/thing:2437197 (Thingiverse doesn't allow me to tag it as a remix)
Topics: y-axis, 3D Printer Accessories, 2020, holder, support, geeetech, motor_mount, 2020_extrusion,...
6
6.0
Mar 17, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 6
favorite 0
comment 0
This Geeetech A30 extruder support is for install extruder with t-nuts support like that one of A10M (like in pic) Please check the metal plate thickness. I know that it is different in various versions. In my v.3.3 A30 it is about 3mm If you liked this work and would like to offer me a coffee, click on "TIP DESIGNER" ----------------------- Questo supporto per Geeetech A30 permette l'installazione dell'estrusore con supporto t-nuts tipo quello di A10M (come in foto) Si prega di...
Topics: geeetech, a30, extruder, 3D Printer Accessories, stl, 90_degree, thingiverse, holder, support,...
6
6.0
Mar 18, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 6
favorite 0
comment 0
I printed Noah132000 legs and they fit perfectly! But I wanted add the possibility to add from 1 to 4 M4 nuts for each leg to add more stability and security! I will re-print them for me. So I didn't try. Please let me know how they fit ----------------- Ho stampato le gambe realizzate da Noah132000 e si adattano perfettamente! Ma ho voluto aggiungere la possibilità di utilizzare da 1 a 4 dadi a T M4 per ogni gamba, per aggiungere più stabilità e sicurezza! Le ristamperò per me. Quindi non...
Topics: geeetech, legs, a30, 3D Printer Accessories, stl, foot, thingiverse, holder, support, geeetech_A30
4
4.0
May 1, 2021
05/21
by
Filippo Di Lascia (gsxr2001)
data
eye 4
favorite 0
comment 0
This support allows you to use the https://www.thingiverse.com/thing:2758325 project on printers like Geeetech A30 and CR10 that have the MGN12H linear guide vertically That project in turn is based on project Heavy Dutty and it is therefore possible to use the various parts For added strength, print as shown, with supports for the top only
Topics: stl, vertical, creality_ender_3, Ender3, Ender_3, support, Creality_CR-10, CR-10, 3D Printer...
5
5.0
Mar 5, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 5
favorite 0
comment 0
It allows the filament to slide better It is designed to be mounted on the 2020 printer frame using 2 M4 and t-nuts screws, but can also be glued or fixed with screws, as in my case If you like this work and would like to offer me a coffee, click on "TIP DESIGNER" ----------------------- Permette di far scorrere meglio il filamento E' disegnato per essere montato sul frame 2020 della stampante tramite 2 viti M4 e t-nuts, ma può essere anche incollato o fissato con delle viti, come...
Topics: Ender, frame, a10, geeetech_A30, A20M, Creality_CR-10, a30, geeetech_A20M, CR10, support, Ender3,...
0
0.0
Aug 14, 2022
08/22
by
Filippo Di Lascia (gsxr2001)
data
eye 0
favorite 0
comment 0
Cable Holder for Nema 17 stepper motor No supports or brim for printing Just 2 M3 screw and nuts are required I recommend printing in PETG for hardness and temperature resistance. But I think it's also good in PLA I suggest 4 perimeters and 50% infill
Topics: 3D Printer Accessories, stepper_motor, Ender_3, NEMA_17, geeetech, Creality_CR-10s, Ender_3_Pro,...
8
8.0
Jun 21, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 8
favorite 0
comment 0
Geeetech A30 SD reader holder I created it to don't damage original microSD reader and for using comfortable SD instead little microSD You can use original PSU screws (I used longer screws because probably my control box case is not perfectly straight) I bought this SD card reader http://s.click.aliexpress.com/e/eurjgr0M If you liked this work and would like to offer me a coffee, click on "TIP DESIGNER"
Topics: SD_Card_Holder, card_holder, thingiverse, 3D Printer Accessories, Card_Reader, a30,...
6
6.0
Mar 17, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 6
favorite 0
comment 0
This support allows installation of the spool holder on the Geeetech A30 frame, rotated of 90° It requires 2x M3 screws for fix the holder and 3x M4 screws + 3x M4 t-nuts for fixing the support on the frame If you liked this work and would like to offer me a coffee, click on "TIP DESIGNER" ------------------------- Questo supporto consente l'installazione del portarotolo sul telaio Geeetech A30, ruotato di 90° Richiede 2x viti M3 per fissare il portarotolo e 3 viti M4 + 3x M4 dadi a...
Topics: geeetech, spool_holder, support, a30, 3D Printer Accessories, spool, stl, 90_degree, thingiverse,...
5
5.0
Jun 21, 2021
06/21
by
Filippo Di Lascia (gsxr2001)
data
eye 5
favorite 0
comment 0
Mounting an extruder like the BMG on the A30, the filament sensor is no longer aligned and therefore the filament does not flow in a linear way. This support is fixed on the same plate and allows to move the sensor on the upper left and allows the filament slide linearly Requires just one M4 screw with nut If you like this work and would like to offer me a coffee, click on "TIP DESIGNER" -------------------------------------------------------------- Montando sulla A30 un estrusore...
Topics: bondtech_bmg, BMG, thingiverse, 3D Printer Accessories, a30, stl, filament_holder, filament,...
3
3.0
Mar 25, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 3
favorite 0
comment 0
A simple 8mm X offset / spacer for Geeetech A30 It simply has to be stuck on the cage. Doesn't require glue or other
Topics: stl, geeetech_A30, 3d_printer, spacer, x_offset, thingiverse, printer, a30, 3D Printer Accessories,...
4
4.0
Mar 31, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 4
favorite 0
comment 0
I suggest PETG or ABS with 50% infill at least The right support only requires supports and brim or raft.
Topics: MeCreator2, MeCreator_2, Y-axes, thingiverse, 3D Printer Parts, geeetech_mecreator2, Y_Carriage,...
4
4.0
Mar 5, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 4
favorite 0
comment 0
It is to don't damage original microSD reader It is for a microSD extension cable like this http://s.click.aliexpress.com/e/B20ShGe8 It requires just 2 M3 screws to close case The use of some double-sided tape is recommended ---------------------- Permette l'uso di una prolunga per l'estensione del lettore microSD, in modo da non rovinare il lettore della stampante Si utilizza con un lettore come questo...
Topics: stl, holder, Micro_SD_Card_Holder, reader, sd_card, support, 3D Printer Accessories,...
4
4.0
Mar 26, 2021
03/21
by
Filippo Di Lascia (gsxr2001)
data
eye 4
favorite 0
comment 0
EDIT 21/01/2020 Added v2 version: it's 10mm longer, so it should completely solve the height problem ------------------------------ EDIT 10/12/2019 Solved Z height that reduced with BMG extruder. I simply used a M3x20 screw. See the pics ------------------------------ You can print them without supports. Print them like in pic. I used 100% infill. Probably You can use lower infill. You can use original lid and screws. So print it is unnecessary. Z rods gap reduced With BMG extruder, Z height is...
Topics: stl, geeetech_A30, Z-Braces, stabilizer, thingiverse, a30, frame, Z_Stabilizer, back,...
