3
3.0
Jun 11, 2021
06/21
by
Jacob Vickers (jakev383)
data
eye 3
favorite 0
comment 0
This is a simple 1.5mm tall spacer to help align the output fan duct height for the Hero Me Gen5 duct. This is specifically for the dual 5015 fan duct, but you should be able to use it for others as well. Has a cut out so that the nozzle can touch the build plate. The Hero Me can be found here: https://www.thingiverse.com/thing:4460970 Why? The instructions call for setting the output duct height between 1.4mm and 1.8mm height off of the build plate when the nozzle is touching (ie: 1.4mm to...
Topics: Herome_gen5, thingiverse, herome, Parts, stl
3
3.0
Mar 13, 2021
03/21
by
Thomas Wilent (KentoHardRok)
data
eye 3
favorite 0
comment 0
I like some fo the improvements of this design but I don't agree with some of the hardware required... I felt like it just required too many additional screws for little benefit. This is like a hybrid of a Gen 4 and a gen 5. I slimed the back wall a bit so it wasn't pushing up against the Heatsink. Fixed all the overhangs so it was much easier and more reliable to print with poor cooling... I mean if you're printing this chances are you need to improve your cooling so it should probably have...
Topics: 3D Printer Accessories, thingiverse, Herome_gen5, stl, herome
3
3.0
Jan 8, 2021
01/21
by
Nose Zeichen (Nosezeichen)
data
eye 3
favorite 0
comment 0
Motivation: I have remixed the parametric HeroMe Gen5 remake for my Ender5 so that I can use a mosquito + BMG (both clones) in a direct drive setup (mounted on SpeedDrive). I removed the unnecessary Y-Offset that the standard HeroMe Base has, which is only needed so that the HeroMe is compatible to gazilliion different printer/hotend combinations. This has two advantages in my opinion: - You regain some lost Y-Axis space (you lose the space with the original HeroMe) - The whole weight is moved...
Topics: Herome_gen5, stl, FYSETC, 3D Printer Parts, Mosquito, BMG, HeroMe, Ender5, thingiverse, herome_remix
3
3.0
Aug 22, 2021
08/21
by
Alex Tri (Iota_Delta_09)
data
eye 3
favorite 0
comment 0
Just a simple remix of the Standard Hero Me Mount but with a cutout that comfortably accommodates the cable on the CR-Touch.
Topics: crtouch, herome_remix, herome, stl, thingiverse, 3D Printer Parts, Herome_gen5
4
4.0
Mar 15, 2021
03/21
by
Aikram Uddin (CephDigital)
data
eye 4
favorite 0
comment 0
Just a simple extension to the lightweight fan ducts so that they can cool the super volcano. Currently printing them out now so maybe wait until I've fine tuned them before printing this out xD
Topics: 3D Printing, Herome_gen5, thingiverse, Supervolcano, herome_remix, stl
3
3.0
Apr 1, 2021
04/21
by
Adiya Hu (Adiyahu)
data
eye 3
favorite 0
comment 0
For people who is using or consider to use M12 sensors, this is the mount for you. **Marlin firmware offsets: (Hero Me original values) for the Single fan duct is: -45 X and -9 Y for the Dual 5015 fan duct is: -50 X and -9 Y ! single fan duct offset should be also work fine with dual fan duct
Topics: thingiverse, herome, 3D Printer Accessories, herome_remix, Autobaan, stl
4
4.0
Mar 13, 2021
03/21
by
stephan werker (eSe0)
data
eye 4
favorite 0
comment 0
embellecedor de ventilador de 40mm con la mano de venom
Topics: 3D Printer Parts, thingiverse, Venom, stl, herome, herome_remix
1
1.0
Apr 19, 2022
04/22
by
Serin Fel (SerinFel)
data
eye 1
favorite 0
comment 0
For some reason known only to the 3D Printer Gods the HeroMe 5 Gantry Adapter, either from the official package or from 11Pump, does not fit my Ender 5 Plus gantry, where the version from 11Pump fit my base Ender 5 just fine. Maybe there's one specifically for the E5+ gantry and I missed it, I don't know. I remixed 11Pump's version. v1.4: moved the Gantry Clip holes to the Left by about 1.5mm, made a recess for the bolt head for the top right pom wheel on the first version. v1.41: additionally,...
Topics: 3D Printer Parts, thingiverse, HMG5, E5+, Ender 5 Plus, herome5, Herome_gen5, gantry adapter,...
4
4.0
Jun 7, 2021
06/21
by
João Mamede (forevertheuni)
data
eye 4
favorite 0
comment 0
** 9 May 2020** - Updated to a new version, this one should be compatible with BTT 2in1 mixer and the 2in1 filament switcher. - Added a modified a couple of base locks/bltouch holder (the new ones from Hero me Gen4 from media man should also work). Fixed a lot of different problems: - The bottom of the heatsink now matches the bottom of the holder - fan ducts were badly placed and resulted in not so great overhand prints; - clearance of the ducts didn't allow adjusting very well - redesigned a...
Topics: herome_remix, herome, ender3pro, thingiverse, 3D Printer Parts, stl, Ender3
5
5.0
May 1, 2021
05/21
by
Michael Morse (mikeybme)
data
eye 5
favorite 0
comment 0
The 9mm Y-offset made no sense to me, so I ditched it and merged the Gantry Adapter with the Base (less screws and nuts to fight with).
Topics: stl, Herome_gen5, herome_remix, 3D Printer Parts, thingiverse
5
5.0
Mar 15, 2021
03/21
by
Alpha Male (Alpha_Male)
data
eye 5
favorite 0
comment 0
I cut this model in the half to make it print faster and without supports. It works just fine and it's easy fix for rattling fans. Print with any material you want. Fans used: 2x 5015 This is a remix from https://www.thingiverse.com/thing:398515
Topics: Herome_gen5, thingiverse, Herome_5, stl, 3D Printer Parts
6
6.0
Apr 1, 2021
04/21
by
Richard Monk (moosemouse)
data
eye 6
favorite 0
comment 0
I love the Hero Me mount for my Ender 3 with E3D V6 hot end, but the BLtouch mount was a little hard to mount without countersunk screws. I also cut down some of the plastic to make it as lightweight as possible without sacrificing strength. X/Y Offsets for this model are identical to the original. Tinkercad model for editing is at https://www.tinkercad.com/things/gjPQN3ozXHm
Topics: BLTouch, thingiverse, 3D Printer Parts, herome, herome_remix, stl
3
3.0
Apr 5, 2021
04/21
by
Cristian Ilea (ileacristian)
data
eye 3
favorite 0
comment 0
Since the original creator of the Hero Me Gen 4 didn't create a part cooling duct for the OEM 4010 fan, I decided to create one myself. I didn't want to use the old gen3 duct for the 4010 fan even though the creator says it's backward compatible. Try to print this part as I shown in the slicer screenshots - 0.16mm layer height - choose supports everywhere, 45deg, LINES support pattern (very important if you decide to use PETG) - put a support blocker near the duct end like in the screenshot -...
Topics: thingiverse, 3D Printer Parts, fan_duct, herome_fan_cover, fanduct, cooling_duct, stl, herome,...
4
4.0
Mar 16, 2021
03/21
by
Kaj Schulten (Skaijuu)
data
eye 4
favorite 0
comment 0
Whiy did I remix this? Well, the way the whole thing had to be assembled, meant that I had to mod some stuff on my direct drive plate. It also meant that when I had to fix something with the hotend, I had to take everything apart. So I designed a few rudimentary mounting plates to the Base 4 of the HeroMe suite, and made it a bit shorter, since the wire guide doesn't need to be where it is in the original design. I went through one revision, because I forgot to put a mount for the BL-Touch on...
Topics: Herome_gen5, thingiverse, herome_remix, stl, 3D Printer Parts, Ender5
4
4.0
Apr 24, 2021
04/21
by
Alexander Yasnogor (jmp0x0000)
data
eye 4
favorite 0
comment 0
This remix is for those who already have an original Creality mount bracket for BLTouch. Enjoy :)
Topics: 3D Printer Parts, herome, BLTouch, stl, Ender3, herome_remix, thingiverse
2
2.0
Jan 18, 2022
01/22
by
James Key (Kamimari)
data
eye 2
favorite 0
comment 0
I couldn't find a Hero me base compatible with a an e3d v6, Wham Bam Mutant, and Hero me Gen 5, so I was forced to attempt a remix.
Topics: Herome_gen5, thingiverse, Orbiter_V15, Wham_Bam_Mutant, Orbiter_extruder, herome, herome_remix,...
2
2.0
Apr 20, 2022
04/22
by
Shannon Wynter (fremnet)
data
eye 2
favorite 0
comment 0
What ==================== Remixed parts for my CR-10S Pro V2 based on the following: * [Hero Me Gen 6 Base ](https://www.thingiverse.com/thing:3182917) * [ABL plate](https://www.thingiverse.com/thing:4888736) I haven't opted to use the remix button as I can only credit one design. Why ==================== By the time you put the full Hero Me adapter/base plate and squeeze an ABL plate between the XChange VSlot adaoterand the XChange Master plate you end up losing around 25+mm of Y travel. Also...
Topics: 3D Printer Parts, Creality, thingiverse, HMG5, hotend, cooling, herome, Herome_gen5, xchange,...
4
4.0
Mar 5, 2021
03/21
by
tony rowell (irchester)
data
eye 4
favorite 0
comment 0
A Fan Brace to make a Dual 5015 configuration more rigid and easier to assemble. No more fiddly holding of nuts whilst screwing the fans in as the nuts are held captive in the brace. Available in 2 styles, 1. Simple - Just acts as a brace / Assembly aid. 2. Cable Slot - 2 identical pieces combine to make a brace and a Cable Slot for tidying up the Fan and LED wiring See also my other designs for use with MHg5
Topics: stl, Fan_Brace, 3D Printer Accessories, HeroMe_gen5, Herome_5, thingiverse
4
4.0
Apr 8, 2021
04/21
by
Robert Esser (Ookamii)
data
eye 4
favorite 0
comment 0
**Untested Work in Progress** I don't like the fact that there's no way of remove the base without taking the direct drive bracket off. That's next mod to this file. Easy removal tweeted the lower part to clear the bolt heads that hold the hotend to the plate. Also clearanced the left side so that the hotend is not touching the the herome base
Topics: gen4, 3D Printer Parts, herome_remix, stl, thingiverse, Ender3, Ender_3, herome
3
3.0
May 1, 2021
05/21
by
No Way José (cncplasticfactory)
data
eye 3
favorite 0
comment 0
This is a remix of the 4020 lightweight standard ducts for the Hero Me Gen5. The screw hole for holding the 4020 blower fans on the original HMG5 lightweight ducts did not line up with the holes on the 4020 blowers I purchased. This corrects that issue by enlarging the top of the 'arm' that holds the fan and then repositioning the hole. I have also included the Fusion 360 file (as well as a .step of the revised arm) should people need to adjust the location of the hole further. The workflow in...
Topics: stl, Herome_gen5, hero_me, herome_remix, Hero_Me_gen_5, 4020_fan, 4020_blower, thingiverse, herome,...
3
3.0
Apr 28, 2021
04/21
by
Colby Canutt (colbycanutt)
data
eye 3
favorite 0
comment 0
The HeroMe G4 basepate needed to be modified to fit the Tronxy X5SA carrier plate. Remixed the long wing to fit with the endstop that is attached to the carrier plate and mixed a bracket to mount the original Tronxy inductive sensor. Mixed from the HeroMe Gen 4 (https://www.thingiverse.com/thing:3182917) and the Petsfang for Tronxy X5SA (https://www.thingiverse.com/thing:4370569). You will still need to print the fan duct from the HeroMe Gen 4. I used the single 5015 blower part.
Topics: thingiverse, herome_remix, TronyXY, X5SA_Pro, 3D Printer Parts, stl, tronxy_x5sa_pro, herome
5
5.0
May 1, 2021
05/21
by
Jonathan Rasmussen (BioBirk)
data
eye 5
favorite 0
comment 0
Revised gantry clip from HeroMe gen5.
Topics: stl, Ender, Herome_gen5, herome_remix, Ender_3, hm5, thingiverse, gantry, 3D Printing
2
2.0
Oct 30, 2021
10/21
by
John Zanussi (johnzanussi)
data
eye 2
favorite 0
comment 0
I followed [Sebazzz's awesome guide](https://damsteen.nl/blog/2021/04/11/how-to-mount-neopixel-to-creality-cr6) to add Adafruit NeoPixel Strips to the top rail of my Ender 3 and then noticed that the HeroMe Gen5 also had an option for an LED bar on the printhead. I remixed both Sebazzz's strip mount with the HeroMe Gen5 LED bar to add a NeoPixel strip to the printhead.
Topics: neopixel, thingiverse, neopixel_strip, Mosquito_hotend, stl, herome_remix, Herome_gen5, 3D Printer...
3
3.0
Jan 19, 2021
01/21
by
Nicole Vera Mackliff (nicoleveramackliff)
data
eye 3
favorite 0
comment 0
Here my remix: - Better air flow for both fans - More space inside for All Metal Hotends - More space for termistor cables - Longer cable attachment - Easier fitting - Avoided collision with Hotend silicon Enjoy
Topics: Hero, 3D Printer Parts, Creality, fanduct, herome_remix, allmetal, herome, thingiverse,...
4
4.0
Mar 16, 2021
03/21
by
Chris Reed (Screed87)
data
eye 4
favorite 0
comment 0
After I printed this fan duct, I noticed that the mounting hole on the duct arm did not line up with the mounting hole on the 4020 fan, was 2mm to the side of it. Read someone heated the arm up and bent it over to line up with the fan so I tried it and had issues where the fan would not hold tight enough and would rotate out of its seat. In this remix I closed off the original hole and embedded the spacer into the arm. I also shrunk the hole in the spacer to accommodate an M3 screw without need...
Topics: PrinterModscom, mdd_v13, Herome_gen5, thingiverse, printermods, Herome_5, stl, 3D Printer...
3
3.0
Mar 25, 2021
03/21
by
Paulo Torres (Ptorres2020)
data
eye 3
favorite 0
comment 0
This remix was made for my Ender 5 Plus, without the need of the Gantry Adapter plate, once i mix the Support Plate with the Original Base. With this instalation you don't need to change any offset, once the Hotend doesn't change the original place. I put the Fan Duct and the Fan Cover that i used like in the picture.
Topics: stl, ender5plus, thingiverse, ender5, herome_remix, ender5pro, ender5_plus, herome, 3D Printer...
3
3.0
Mar 19, 2021
03/21
by
Adiya Hu (Adiyahu)
data
eye 3
favorite 0
comment 0
**Links to Hero Me Gen4 by mediaman** https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917 This is an update version of my previews LED bar mount for Hero Me gen3 (https://www.thingiverse.com/thing:4254593), specifically for Gen 4 Hero Me. Mediaman, the author of Hero Me Gen4, has designed an LED bar mount for Gen4. Mine is a remix of his original design. Specifically for LED strip up to 45 mm in length, 10~12 mm in width, 1 mm in back strip thickness. My LED...
Topics: Led_Holder, 3D Printer Accessories, CR10S_PRO, led_mount, thingiverse, herome_remix, herome, stl
2
2.0
Dec 1, 2021
12/21
by
Branden Allen (Jason_55904)
data
eye 2
favorite 0
comment 0
I needed more adjustment to be closer to the bed. I'm not sure that being closer to the bed matters and if so does it matter more then repeatability. If it does not I may go back to the old file that this is remixed from. so I added slots. This way I can set the height and tighten the screws. I used the 4 screw holes on the right. Middle-Middle, Middle-Right, Bottom-Middle, and Bottom Right.
Topics: laser_cutter, thingiverse, 3D Printer Accessories, laser, laser_engraver, stl, Herome_gen5,...
5
5.0
May 1, 2021
05/21
by
Chris C. (ShelfStable)
data
eye 5
favorite 0
comment 0
I wanted to mount a Dragon hotend on the CoreXY I was building with the Orbiter extruder above it, neither of which are standard for that design, so I used this base as a foundation to design a platform to mount the Orbiter. The platform and the extruder itself might have vertical clearance issues depending on the design of the printer. Like the normal V6 design, it will probably work best with the air dam in the back. No modifications have been made to any other part of the design so it should...
Topics: stl, Herome_gen5, Phaetus, hotend_mount, herome_remix, Orbiter_extruder, hotend,...
3
3.0
Jun 11, 2021
06/21
by
Akmal Zainal (akmalznal)
data
eye 3
favorite 0
comment 0
The original version of the STL (PM_v1.3_Bondtech_RH_Adapter_1.stl) used to crash into the Z extrusions. This remix is to shorten it so that it doesn't. To use this remix, you need to have: -Printermods MDD v1.3 adapter -BMG extruder, Bondtech or clone -Pancake NEMA17 stepper motor
Topics: BMG_clone, BMG, Herome_gen5, herome_remix, printermods, bondtech, Bondtech_BMG_extruder, 3D Printer...
3
3.0
Mar 19, 2021
03/21
by
Adiya Hu (Adiyahu)
data
eye 3
favorite 0
comment 0
Just updated the part cooling duct on my CR-10S Pro from Hero Me 4020 single fan to 5015 dual fan. A great benefit beside better part cooling is a better view to the hotend nozzle. So I designed this LED mount specifically for HERO ME 5015 dual fan duct, it's easy attachable to the link bar between dual fans. ------------------------------------------- What else do you need to install: * LED strip x1: 5630-168 dual row, dimension 38x12mm per unit. 6 LEDs in 12V, bright enough to lit the print *...
Topics: Led_Holder, 3D Printer Accessories, CR10S_PRO, led_mount, thingiverse, herome_remix, herome, stl
2
2.0
Nov 8, 2021
11/21
by
thatoneguy fromreddit (like38italians)
data
eye 2
favorite 0
comment 0
a quick release nozzle cam designed for the hero me light weight ducts and the night vision pi cameras available on amazon and other retailers. this provides excellent vision of the nozzle and keeps the dual 5015 blower fans secured more tightly, no plans on making a picam 2 version as i dont think the auto focus will work this up close, or any auto focusing pi cam, i dialed the focus in manually and it has great quality, the lower the speed you run the fans the nicer time lapse files will look...
Topics: stl, Picam, Herome_gen5, raspberry pi camera, 3D Printer Accessories, thingiverse, raspicam, hero...
3
3.0
Jun 11, 2021
06/21
by
Cephalon IO (amaniza2010)
data
eye 3
favorite 0
comment 0
I Remix HeromeGen5 dragon mount to fit Ender-5plus and orbiter extruder v1.5 and it make it so motor is point to the back of printer for better center of gravity is it matter? I don't know. Untested Out of filament plan to use ABS+ (So hype about Getting a dragon HF so much i Remix Stuff)
Topics: Herome_gen5, herome_remix, hotend_mount, dragon, extrudermount, Orbiter_extruder, thingiverse, 3D...
3
3.0
Apr 5, 2021
04/21
by
MARCELO SICILIANO (Marcelofs13)
data
eye 3
favorite 0
comment 0
Modded the hero me gen 4 base to work on the Micro Swiss Direct Drive, it works
Topics: thingiverse, DirectDrive, 3D Printing, herome, stl, MicroSwiss
4
4.0
Jan 9, 2021
01/21
by
Michèl Sobral (Eddie1505)
data
eye 4
favorite 0
comment 0
I needed two mounting points on my gantry adapter. One for the laser and one for the BLTouch. So I took the gantry adapter and put a second mount on the other side. Now I can mount to things at the same time.
Topics: Herome_gen5, thingiverse, 3D Printing, stl
3
3.0
Jan 8, 2021
01/21
by
Noah Ossanna (noahossa)
data
eye 3
favorite 0
comment 0
Gantry adapter for the Hero Me Gen 5 fan setup. The configurations of the Gen 5 don't seem to support the Ender 3 V2 with a E3D V6 hotend AND a BL touch so I made this adapter plate for my setup. To assemble, inset the nuts in the plate as shown and bolt it to your extruder assembly FIRST and then x-axis gantry plate SECOND. There should be 3 M3 screws to attach the extruder assembly to the adapter plate and 3 M3 screws to hold to the gantry plate. I found that only 2 were needed for the latter...
Topics: Ender3v2, herome, Herome_gen5, stl, E3D_v6, Ender_3, cooling_fan, 3D Printer Extruders,...
4
4.0
May 1, 2021
05/21
by
Perry Nguyen (pfn0)
data
eye 4
favorite 0
comment 0
This is my current print head setup for my BLV Cube. Features: * Orbiter 1.5 mounted on a minimal plate on top of the carriage * NF Crazy mounted in the V6 locker * 4010 hotend cooling fan * Dual 4020 fans for cooling (good lord they're loud) * Neopixel 16 LED ring (entirely optional) * Cable routing mast * Main assembly mounts directly to the V6 locker for ease of maintenance Items reused: * EVA2 cable holder https://github.com/EVA-3D/eva-main/blob/main/stls/cable_holder.stl * HeroMe gen5 fan...
Topics: stl, Herome_gen5, neopixel_ring, NF_Crazy, 3D Printer Parts, Orbiter, BLV_mgn_cube, thingiverse,...
3
3.0
Aug 8, 2021
08/21
by
Андрей Приходько (Werdan_m)
data
eye 3
favorite 0
comment 0
This is based on 9A gantry adapter with proper holes aroung leveling sensor for ridgid mounting. There is an issue with Bl-touch wing. It hits X endstop housing and doesn't allow homing. That is why a version with mounting holes on adapter is available as well. Offset for that version is X -35, Y 3. It works with one 5015 fan, don't know about others.
Topics: thingiverse, Voxelab_aquila, 3D Printing, herome, stl
4
4.0
Mar 5, 2021
03/21
by
Harley Carr (kmxs)
data
eye 4
favorite 0
comment 0
The one provided in the Hero Me pack didn't work. I dremeled these modifications into the one I was using, figured I would share this to make things easier for the next person. It fits miroswiss style hotends as well as stock.
Topics: stl, MicroSwiss, Ender5, herome, 3D Printer Parts, thingiverse
4
4.0
Jan 9, 2021
01/21
by
Michèl Sobral (Eddie1505)
data
eye 4
favorite 0
comment 0
I wanted to mount my Creality Laser Kit to the Hero Me Gen5. I took the dimensions from the ABL Sensors and designed it to fit my laser mount holes. It fits perfectly for my ender 3 pro. For stability I increased the perimeter counts.
Topics: Herome_gen5, thingiverse, 3D Printing, stl, laser, adapter
4
4.0
Jan 4, 2021
01/21
by
Sithpon Anusornthanawat (TaMoNe)
data
eye 4
favorite 0
comment 0
Original Hero Me base for Ender 5 is a bit fragile at the latch part and tricky to install. I designed this to make it more easy and sturdy. No need to take out the hotend part, fix it to the X carriage with 2 M3 8-10 mm.
Topics: herome, stl, 3D Printer Parts, Ender5, thingiverse
1
1.0
Apr 20, 2022
04/22
by
Derek Burket (sick4noise)
data
eye 1
favorite 0
comment 0
I tweaked the LED light bar to make it a bit wider to support 10mm LED light strips. I also make it a bit wider as I needed to fit two 12V strips in series.
Topics: thingiverse, hero_me_gen5, herome5, Herome_gen5, 3D Printer Accessories, Herome_5, Hero_Me_gen_5,...
3
3.0
Jan 19, 2022
01/22
by
Alexander Achorn (Dracrius)
data
eye 3
favorite 0
comment 0
Due to how I manage my cable the wire chase on the standard hero me is more of an annoyance so I remixed it away so it all looks much cleaner! You can find my Cable Chain remixes to go with here! https://www.thingiverse.com/thing:5191531
Topics: Herome_gen5, Ender_3_Pro, creality_ender_3, thingiverse, Ender_3, herome_remix, stl, 3D Printer...
2
2.0
Apr 19, 2022
04/22
by
Matt Jones (ElectricDoggo)
data
eye 2
favorite 0
comment 0
Direct drive for red aluminum dual gear extruder. Fits Ender 3 and Ender 3 V2. I had been using the Direct Drivinator with Hero Me 5 before this but found that I was getting a lot of flex when the extruder pushed filament forward. This resulted in blobby prints. This design is totally rigid and produces no blobbies. Added thumb brace so when you press the lever on the extruder you don't have to put pressure on the rest of the print head. Added bracing so that it is much more rigid and you can...
Topics: 3D Printer Parts, thingiverse, direct_drive, direct-drive, herome, Herome_gen5, dualgear_extruder,...
4
4.0
Apr 1, 2021
04/21
by
Derrick Roberts (3DZprints)
data
eye 4
favorite 0
comment 0
One of my Ender 3s has a different parts cooling fan with a 3mm tab on the corners where the bolts go. This is modified to accomodate. Fan part #PB04010MS4
Topics: thingiverse, 3D Printer Accessories, herome_remix, hero_me, stl
4
4.0
Mar 9, 2021
03/21
by
tony rowell (irchester)
data
eye 4
favorite 0
comment 0
A Part Selector for the HeroMe Gen5 (thing:4460970) and a selection of accessory parts for it. My 1st part is a Nut Keeper tp prevent those captive nuts falling out. A Simple spacer to allow the Hero Me Gen5 to be used with the "cheap" generic direct drive conversion bracket commonly sold on Amazon & Ebay. Requires 2 x M3x40 screws also see my other parts for the Hero Me Gen5
Topics: stl, thingiverse, 3D Printer Accessories, Extruder_Spacer, herome_gen5
3
3.0
Mar 25, 2021
03/21
by
Hsin Yang Ho (hamsteyr)
data
eye 3
favorite 0
comment 0
Based on the design by mediaman. Many people, myself included, like this HeroMe design, but find that the holes to mount the actual duct below are too wide/loose and can't properly secure it on. This is because measuring with a vernier caliper, the diameter of the screws including the threads are 1.9mm and the holes that were made in this design were 2.7mm +- aka way too large. This remix is based on the original design, just with smaller mounting holes, at 1.6mm. This is so that the threads of...
Topics: stl, Hero Me, thingiverse, HeroMe, 3D Printer Parts
4
4.0
Mar 15, 2021
03/21
by
Pn Nn (p047)
data
eye 4
favorite 0
comment 0
This is for the Hero Me Gen 5 Ender 3 Mount Plate. You will need: 2x M3x10 Screws 2x M3 Nuts If you haven't added the M3 Nuts to the ender 3 mount plate, you will have to take it off and add them. It will only work with one fan since the mount is a bit too close to the print head.
Topics: Herome_gen5, thingiverse, stl, FreeABL, 3D Printer Accessories
3
3.0
Jan 8, 2021
01/21
by
Ignasi Trochut (Traca)
data
eye 3
favorite 0
comment 0
After install Hero Me Gen 5 I would to try to adapt the light weight duct adding a Venturi effect. Be advice, my Fusion 360 level are very basic, so the design could be better. If you want the step file, just ask me and I'll share. I'm sure have somebody the knowledge to improve this design.
Topics: Herome_gen5, venturi, stl, thingiverse, 3D Printer Accessories, venturieffect
1
1.0
Apr 19, 2022
04/22
by
Edgaras Ausvicas (karosas)
data
eye 1
favorite 0
comment 0
Quick, eyeballed remix to fit in the sherpa's motor, since original was blocked by the print. The arm is a bit thin and there's a bit space to make it thicker, but seems to work for me so far, so I'm keeping it like this for now. Rotate on the flat site, so that it doesn't require supports
Topics: Ender, Sherpa, thingiverse, herome, 3D Printer Accessories, stl
